Hi,
I put a nano sim adapter into my brand new razr I, and when I removed it, it got caught on 2 of the pins, and pulled them out the sim card slot. The phone will no longer read a sim card.
I also imported my phone overseas (South Africa) and bought it off ebay.
1) Is there a way to get this phone fixed? They don't sell the Razr I in my country (hence why I needed to import it). Is there maybe a similar phone that shares a sim card holder?
2) Can just the sim card slot be replaced or does a whole part of the phone need replacing?
Thanks for the help!
same problem
hi1 i have the same problem, you can fix you phone? how you do ?
Hi guys.
It ´s highly possible, that the SIM slot is similar or identic to other phones slots. So If you find some good mobile phone service, They really can look at it and maybe change for new one for lets say from $20 to $50 including work... You just have to try....
Related
My Kaiser has refused to recognise my T_Mobile uk sim card. The T-mobile card works well with any other phone. My kaiser also works well with other sim cards from 3, orange and vodafone. My kaiser was unlocked last month. Pls help. T-Mobile has accepted to change the card for £10.
Did it used to work?
We upgraded a number to a number of Kaisers some months back - kept the existing SIM cards that we had been using. All was fine but then when one Kaiser died, we got a replacement and the SIM card which was working fine (and was by now probably two+ years old) in the now dead Kaiser, refused to work in the new one. Worked fine in other phones.
Took it in to a T-Mobile shop and they replaced the SIM card - all then fine.
Hope that helps.
Sounds like it's an old T-Mobile sim card. If so, get it swapped. Should sort your problem. If not, then I don't know what to suggest. Have you tried another T-Mobile sim?
Happened to me when I got a T-Mobile PAYG SIM last week to trial for data coverage.
Popped SIM in and worked well.
I then tried a Vodafone Sim and that was ok.
When I put the T-Mobile SIM back in - I got the message "no SIM found"
Tried Orange and Vodafone and they both gave the same message !
I was not convinced the SIM'S were making good contact - there seemed too much movement under the flimsy metal crossbar.
The solution to get the T-Mobile and other SIM's working was to insert a small piece of paper on top the SIM as you slide it under the metal crossbar.
This puts a little bit of extra padding on top of the SIM to help make decent contact.
I suppose the paper could be put on top of the crossbar instead to achieve the same effect but have not tried this.
r
Andrew
joe mboule said:
My Kaiser has refused to recognise my T_Mobile uk sim card. The T-mobile card works well with any other phone. My kaiser also works well with other sim cards from 3, orange and vodafone. My kaiser was unlocked last month. Pls help. T-Mobile has accepted to change the card for £10.
Click to expand...
Click to collapse
Have you tried my possible solution ?
r
Andrew
my sim card is not workin only can make emergency calls,what is the problem??
darrellkelly93 said:
my sim card is not workin only can make emergency calls,what is the problem??
Click to expand...
Click to collapse
umm your service is disconnected?????
no,its not reading the card slot at all
This may be a stupid question- is the SIM card in the proper way? When did this start? What changed? Did you drop the phone?
darrellkelly93 said:
my sim card is not workin only can make emergency calls,what is the problem??
Click to expand...
Click to collapse
When I first bought my Tilt used, I had the same problem. I had to stick a tiny part of a post-it to the back of my SIM and shove it in there. It's like my SIM wasn't thick enough.
The best way - to try with another SIM (maybe your friends have a mobile-phone )
Sometimes the old SIMs don't want to work with modern devices....
well heres my 2 cents as i just fixed it, my issue at first i thought it was the sim slot (replaced...) then found out the ribbon was damaged a crack occured, after another week of waiting for a package (today) i replaced it and now its running fine
Same here
My Sim was no longer available.
Kaiser had "sim card is missing", but the sim was in there.
I disassebled it and found that the main flex cable was damaged.
Now I'm waiting for replacement.
So, When the phone shows up "sim missing" it's an flex cable matter not the sim card flex or the sim card unit.
same problem here
I'm having the same problem here. thought that it was the flex cable of the sim, but when I disassambled the Kaiser I found out that the main cable was slightly scrached from a corner, and the sim's cable was there pluged well... I'm trying to fix it..gonna post the result for "sim card failure"...
I was overseas travelling and used some different sim cards no problem. But on return, I put my original sim card in, and the xperia z says "sim card inserted, restarting" and restarts, only to display the "no sim card" icon. I've tried a lot of things, and got a new sim card from my carrier because I thought that one might have been broke because I didn't use it in a while, but the new one has the same problem.
I really hope it's not a hardware issue, the phone is older than 1yr, and I didn't buy it in this country. I suspect that it might not be, since it was working fine until I swapped sim cards. Could this be a firmware issue? Any suggestions?
[Edit] It might be worth mentioning that I did a firmware upgrade while overseas without my original sim in.
Hello, I recently bought the S5 mini on Amazon. Apparently the device is from Brazil.
It does work on my NY network only issue I am having is that the micro SIM card (not memory card, actual network provider card) I am using gets lost in the slot, while the regular size one doesnt even fit. Is there anything in the middle?
The micro actually works but to get it out I need tweezers and a lot of patience .... Which makes me wonder if that's the correct size to begin with?
Help please?
Thanks
Isn't your nano sim?
This is how my cards look like:
Hello All,
I've been looking to add a 2nd SIM to my wife's phone as she'd like to have separate numbers for work/life.
When I opened up the SIM tray I saw that the tray has an empty slot for 1 SIM card and another for SD card. there is a shape of the 2nd SIM slot on the tray, but it isn't fully cut out.
So I went to a few mobile repair shops around my area and was told they can order a tray for us, but it probably won't work as the phone is probably locked in software.
I know the phone isn't carrier locked, since I can switch carriers freely, so what can be the reason some unknown entity went out of their way to lock this phone to a single-SIM only?
And is there a way to unlock the 2nd slot?
Thanks!
NirXY said:
Hello All,
I've been looking to add a 2nd SIM to my wife's phone as she'd like to have separate numbers for work/life.
When I opened up the SIM tray I saw that the tray has an empty slot for 1 SIM card and another for SD card. there is a shape of the 2nd SIM slot on the tray, but it isn't fully cut out.
So I went to a few mobile repair shops around my area and was told they can order a tray for us, but it probably won't work as the phone is probably locked in software.
I know the phone isn't carrier locked, since I can switch carriers freely, so what can be the reason some unknown entity went out of their way to lock this phone to a single-SIM only?
And is there a way to unlock the 2nd slot?
Thanks!
Click to expand...
Click to collapse
Hi
I would take A gable and get a cheap sim tray of the bay and see if it works.
I have 2 sim and Micro SD in mine. If it is software lock i think you could flash A different region software to unlock it. Or It could be blocked as the sim reader only has the pins to read 1 sim card witch could be need hole new sim reader slot.
You could try cut out the plastic blocking the second slot