[Q] CWM5 or CWM6 for CM9? - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello there,
This is my first post and question. I hope I'll get the right answer here.
I've been reading lately that is better to have an old recovery clockwork 5.x.x.x than 6.x.x.x for custom rom like CyanogenMod 9 and other based on CM9 roms. I'm asking because I have a lot of problems and I want to see if I change CWM what will be the different. Do you think this will help? If YES - Can you tell me how to change my CWM6 to CWM5 without flashing the ROM and loose all my app and settings?
Thanks a lot and sorry for my bad English!

globul said:
an you tell me how to change my CWM6 to CWM5 without flashing the ROM and loose all my app and settings? :
Click to expand...
Click to collapse
Need to know what is your phone model . Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
just flash the correct semaphore kernel according to version of i9000 ROM you are using from My Android Collections to get the correct CWM
you will not lose any data by doing this

xsenman said:
Need to know what is your phone model . Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
just flash the correct semaphore kernel according to version of i9000 ROM you are using from My Android Collections to get the correct CWM
you will not lose any data by doing this
Click to expand...
Click to collapse
Actually my model is Galaxy S Plus I9001, but there is no Questions Forum for this model that new people (under than 10 post) can ask for advice. :angel:

globul said:
Actually my model is Galaxy S Plus I9001, but there is no Questions Forum for this model that new people (under than 10 post) can ask for advice. :angel:
Click to expand...
Click to collapse
Thats odd.....
Galaxy S Plus I9001 Q&A (
Originally Posted By: AllGamer
Replies: 1,925
Views: 185,054
and the
Galaxy S Plus I9001 General
Originally Posted By: AllGamer
Replies: 1,034
Views: 149,562
Both thread are stickied and always on top, ( not every model gets this privilege) I guess you must have overlooked them.
anyway to get the i9001 CWM, just look under "Android Rescue, Recovery Kits" in My Android Collections

xsenman said:
Thats odd.....
Galaxy S Plus I9001 Q&A (
Originally Posted By: AllGamer
Replies: 1,925
Views: 185,054
and the
Galaxy S Plus I9001 General
Originally Posted By: AllGamer
Replies: 1,034
Views: 149,562
Both thread are stickied and always on top, ( not every model gets this privilege) I guess you must have overlooked them.
anyway to get the i9001 CWM, just look under "Android Rescue, Recovery Kits" in My Android Collections
Click to expand...
Click to collapse
OK, I'm sorry for the misunderstanding. Do I have to write there again or you or someone else can give me the right answer?

globul said:
OK, I'm sorry for the misunderstanding. Do I have to write there again or you or someone else can give me the right answer?
Click to expand...
Click to collapse
use CWM 6 or TWRP 6 for latest versions, if your CWM is wrong, upgrades via CWM will fail, so downgrading CWM is not wise.
Best use i9001 WIKI for guidance

globul said:
Hello there,
This is my first post and question. I hope I'll get the right answer here.
I've been reading lately that is better to have an old recovery clockwork 5.x.x.x than 6.x.x.x for custom rom like CyanogenMod 9 and other based on CM9 roms. I'm asking because I have a lot of problems and I want to see if I change CWM what will be the different. Do you think this will help? If YES - Can you tell me how to change my CWM6 to CWM5 without flashing the ROM and loose all my app and settings?
Thanks a lot and sorry for my bad English!
Click to expand...
Click to collapse
I would rather say go with cwm 5.x.x.x . CWM6 has some bugs (reboots sometimes in between flashing a rom), which can actually brick ur phone!
Sent from my GT-I9001 using xda app-developers app

Aldokazer said:
I would rather say go with cwm 5.x.x.x . CWM6 has some bugs (reboots sometimes in between flashing a rom), which can actually brick ur phone!
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Curentlly I'm with CWM6 and I tought if I change it with CWM5 this will help me and my phone to not switch off by it self. I have just realized that my problem is not connected with the recovery by another user. What other can I do?

Related

s5839i compatibility?

Helo I recently got a Galaxy ace, while I thought It would be the s5830 model I got the s5839i.
I know the roms seem to be compatible (even though there isn't much information about that), but I was wondering if the clockworkmod5830i zip file is too, so I can install roms without big worries (i'm posting this because if I tried it and bricked the phone... there wouldn't be any way to go back since there are no 5839i odin files out there or anything)
S5839i is S5830i.
S5839i or S5830i is not S5830!!
Neo-Mike said:
S5839i is S5830i.
S5839i or S5830i is not S5830!!
Click to expand...
Click to collapse
"is"?
Why the different model number then?
ZakooZ said:
Helo I recently got a Galaxy ace, while I thought It would be the s5830 model I got the s5839i.
I know the roms seem to be compatible (even though there isn't much information about that), but I was wondering if the clockworkmod5830i zip file is too, so I can install roms without big worries (i'm posting this because if I tried it and bricked the phone... there wouldn't be any way to go back since there are no 5839i odin files out there or anything)
Click to expand...
Click to collapse
Hey mate,
I'm new to all this too and have recently bought a s5839i (2 weeks ago), I aslo bricked my phone after 2 days as I found information on the s5839i sparce and I didnt take the time to reseach up as I should have done.
Ive since found out that Odin v1.83 works with our devices and I reloaded with a stock polish rom from sammobile and everything was fine again I couldnt get the clockworkmod to fully work on the rom, you could install it but when I went into recovery mode after a reboot it would just go back to the android version rather that the ClockworkMod.
I then tried the Retribution_beta3.5 and it works fantastic, looks so much better than stock and I also now have the flash player working which was my aim from the get go. I am now able to run ClockworkMod v5.0.2.6 and back up my device.
The only thing that worries me now is in "about phone" my model number now shows up as GT-S5830i rather than GT-S5839i, sure it make no difference like.
Hope this helps you, Im just reading as many threads as I can now to find out more info, I want to get the sky go app to work.
ZakooZ said:
Helo I recently got a Galaxy ace, while I thought It would be the s5830 model I got the s5839i.
I know the roms seem to be compatible (even though there isn't much information about that), but I was wondering if the clockworkmod5830i zip file is too, so I can install roms without big worries (i'm posting this because if I tried it and bricked the phone... there wouldn't be any way to go back since there are no 5839i odin files out there or anything)
Click to expand...
Click to collapse
Checkout this thread to flash latest stock roms (from sammobile) using Odin: http://forum.xda-developers.com/showthread.php?t=1822109
Also go to this thread http://forum.xda-developers.com/showthread.php?t=1551156 for more detail about important stuff
Hope this helps
Only1wilber said:
The only thing that worries me now is in "about phone" my model number now shows up as GT-S5830i rather than GT-S5839i, sure it make no difference like.
Click to expand...
Click to collapse
Hello,
From this it follows that we can flashing our s5839i using s5830i rom?
I can't find polish clean (unbranded) rom for s5839i, because I have a lot of problems with my T-mobile rom. (S5839iBOLC5). And also I can't flash CWM recovery for it. Only root works fine.
I found S5839IXXLD2 and S5839IBULI1 but whether is there polish language?
How can I checked it?
ZakooZ said:
"is"?
Why the different model number then?
Click to expand...
Click to collapse
Because they are for different countrys
Tapatalk signature:
Sent from my banana with xda premium
So, can I flash using s5830i ROM?
DonMate said:
So, can I flash using s5830i ROM?
Click to expand...
Click to collapse
YES,WE CAN!
-Obama
Tapatalk signature:
Sent from my banana with xda premium

[Q] Can I flash a P1000 rom to a SHW-M180S Korea Galaxy TAB? & other questions

Hello,
Recently I get a SHW-M180S Korean Galaxy TAB. It work like a charm but I need extra features and a good custom rom.
I did a lot of research, even in korean forums, but I can't get much info on how to root and install roms.
- First problem is rooting. I know Froyo 2.2 is easily rooteable but I have an:
Android 2.3.6
Kernel version 2.6.35.7
Build number GINGERBREAD.UC27
Wich is imposibble for me to root. I've tryed SuperOneClickv2.3 and DooMLoRD's Easy Rooting Toolkit with no luck and a few other with the same result. I know for sure it's related to Gingerbread 2.3.6 and didn't find a tool or tutorial on how to root it.​
-Second is the rom change. I know that there are a few posts asking for this, but, I didn't find a clear and concise response to:
can I flash a rom for a TAB P1000 to a SHW-M180S???​
I hope that some one can answer me or at least guide me in the correct direction because all the info I found about it finish on a dead end. At least for my Gingerbread 2.3.6
Thanks is advance...
Hi.
No one?
Sent from my SHW-M180S using xda app-developers app
I reply my self afer days of digging around and risking my TAB in to a brick.
I've found a rom that is the last one developed for the SHW-M180S (Android 2.3.6 UC27) but rooted.
I have flashed it with Odin 1.85 wich is the one known to work well with this device. Everything goes well and now I have a rooted TAB. Here is the link to download it.
http://rapidlibrary.com/source.php?file=ulcm8efvyti89on&sec=eea10ad4
Now I want to go further and have a compatible and working custom recovery but I don't know which can work, so please, I need some one to guide me!!
Of course, I want also to have ICS and I have also foun a ICS rom for this device but I dare not flash it without warranties.
so if some one knows how to do it or at least a korean forum where I can find info, I'll be realy pleased.
erucoco said:
Now I want to go further and have a compatible and working custom recovery but I don't know which can work, so please, I need some one to guide me!!
Of course, I want also to have ICS and I have also foun a ICS rom for this device but I dare not flash it without warranties.
So if some one knows how to do it or at least a korean forum where I can find info, I'll be realy pleased.
Click to expand...
Click to collapse
No one???
Please!!
My friend also asked help for his Korean model.
Anybody tried Custom recovery or root?
Does Normal Tab's Recovery and root will work for this mobile?
why not try CyanogenMod 9.1 for tab p1000
erucoco said:
I reply my self afer days of digging around and risking my TAB in to a brick.
I've found a rom that is the last one developed for the SHW-M180S (Android 2.3.6 UC27) but rooted.
I have flashed it with Odin 1.85 wich is the one known to work well with this device. Everything goes well and now I have a rooted TAB. Here is the link to download it.
Now I want to go further and have a compatible and working custom recovery but I don't know which can work, so please, I need some one to guide me!!
Of course, I want also to have ICS and I have also foun a ICS rom for this device but I dare not flash it without warranties.
so if some one knows how to do it or at least a korean forum where I can find info, I'll be realy pleased.
Click to expand...
Click to collapse
why not to try CyanogenMod 9.1 for P1000 as long as you have an official Rom you can install it from odin
i'm downloading the Rom you mentioned i'll try P1000 CWM update then try ICS rom
see you after a while
Today i try flash my M180S with P1000XEJQ8 and TAB die, only the light when i try power on.
After flash (use odin) with HOME_M180S.TE23.1719_CL227119_REV03_user_low_ship.tar.md5, it hanging on the "Galaxy tab". I do wipe and try reflash again, but same.
How repair TAB?
Hi.
I`m very pleased that we have some responses in this thread. Keep on testing guys so we can have more info on this specific samsung model
To Abzal:
As I have said in a few posts above, you soud try to install UC27 to fix the tablet. Here is the link http://rapidlibrary.com/source.php?file=ulcm8efvyti89on&sec=eea10ad4
Put the tab in downlod mode and flash with odin1.85
Good luck
Sent from my SHW-M180S using xda app-developers app
Does any one know if this is possible in the SHW-M180S?
I have already asked in the discussion thread.
I repair my TAB only with Riff with full flash
Abzal said:
I repair my TAB only with Riff with full flash
Click to expand...
Click to collapse
Yo mean with a Riff JTAG Box??
Really?? How you do it?
That's interesting. Can you explain a bit please?
I flash it wih full Samsung_M180s_fuul.bin and now TAB work.
erucoco said:
Does any one know if this is possible in the SHW-M180S?
I have already asked in the discussion thread.
Click to expand...
Click to collapse
Hi,
No one tested it on a SHW-M180S???
Oh boy you didn't search well , there is an ICS version out for about a month ago.
erucoco said:
Does any one know if this is possible in the SHW-M180S?
I have already asked in the discussion thread.
Click to expand...
Click to collapse
Here is the ICS for your model , i am using it for months i don't have any issue . the only issue is sms capability. but i don't use sim so it works for me .
this is the thread link. http://bbs.gfan.com/android-4048606-1-1.html
and this is the download link . download and unzip.
http://pan.baidu.com/share/link?shareid=66123&uk=571066819
after flashing it via odin flash this patch also
http://pan.baidu.com/share/link?shareid=68763&uk=571066819
face any problem just sent me a messege i'll be happy to help.
good luck and by the way there is Jellybean 4.1.2 is also coming for our tab m180s, just watched a video on youtube.
waqasshahzad1986 said:
Here is the ICS for your model , i am using it for months i don't have any issue . the only issue is sms capability. but i don't use sim so it works for me .
this is the thread link. http://bbs.gfan.com/android-4048606-1-1.html
and this is the download link . download and unzip.
http://pan.baidu.com/share/link?shareid=66123&uk=571066819
after flashing it via odin flash this patch also
http://pan.baidu.com/share/link?shareid=68763&uk=571066819
face any problem just sent me a messege i'll be happy to help.
good luck and by the way there is Jellybean 4.1.2 is also coming for our tab m180s, just watched a video on youtube.
Click to expand...
Click to collapse
AWESOME MAN!!!
I have to try it.
Please confirm me: I only need to flash it with Odin, no recovery or partitioning is required???
Thanks in advance
waqasshahzad1986 said:
Here is the ICS for your model , i am using it for months i don't have any issue . the only issue is sms capability. but i don't use sim so it works for me .
good luck and by the way there is Jellybean 4.1.2 is also coming for our tab m180s, just watched a video on youtube.
Click to expand...
Click to collapse
Has in this version full russian LP?
erucoco said:
AWESOME MAN!!!
I have to try it.
Please confirm me: I only need to flash it with Odin, no recovery or partitioning is required???
Thanks in advance
Click to expand...
Click to collapse
Absolute nothing to do , just flash it with ODin , kernel contain clockwork recovery. but make sure before and after flash factory reset . and make a backup of your internal storage , mine got formatted so just in case make a backup.
---------- Post added at 04:03 PM ---------- Previous post was at 03:59 PM ----------
Abzal said:
Has in this version full russian LP?
Click to expand...
Click to collapse
I don't think it has Russian Language. but it has English so its good for many tasks.
please help me
hi all ...
iam not that good in android .. but my galaxy tab ( korean ) with 2.6.35.7 kernel version is down ... it's just flashing ( the flash of camera ) is workng when i connect it to computer ... can any one help me to fix it ?
waqasshahzad1986 said:
Absolute nothing to do , just flash it with ODin , kernel contain clockwork recovery. but make sure before and after flash factory reset . and make a backup of your internal storage , mine got formatted so just in case make a backup.
Click to expand...
Click to collapse
There is one problem, I have my TAB in stock and this rom have no recovery so I cannot do a backup. But I really wanto to do a backup, so, can I instal clockwork recovery? and wich version do I need to install?
Thanks
erucoco said:
There is one problem, I have my TAB in stock and this rom have no recovery so I cannot do a backup. But I really wanto to do a backup, so, can I instal clockwork recovery? and wich version do I need to install?
Thanks
Click to expand...
Click to collapse
I meant backup your internal storage , photos , videos and other stuff not asked you to make a nandroid backup. you can flash the kernel but it does not make nandroid backup so you just have to deal with it. if you can't factory reset before flashing you can do it after flashing.
I have provided you the original thread link . you should read all the stuff there. i can only help you if something goes wrong. by the way you always can flash stock firmware.
here is the stable High resolution 2.3.6 stock version.
http://115.com/file/bhrvftyu
original thread.
http://bbs.gfan.com/android-3384801-1-1.html

Samsung Galaxy Note N7000 4.2.1 android version istallation help!

Hi xda developers!!!
I own a galaxy note n7000...and i just realized that i have an old facion android version the 4.0.4 of android.So i want to chance it to the 4.2.1 version that i found on this forum.Well i found this one ---> http://forum.xda-developers.com/showthread.php?t=2051904 but i preaty much dont understand so much cose i am a begener.So the help i am asking is to help me undersatnd the speps an the how to do the most safe rom istallation...Plz help!!!
Ferrarimanos
And my android version is only update it twice from kies...and also i have rooted it my self!!!
ferrarimanos said:
Hi xda developers!!!
I own a galaxy note n7000...and i just realized that i have an old facion android version the 4.0.4 of android.So i want to chance it to the 4.2.1 version that i found on this forum.Well i found this one ---> http://forum.xda-developers.com/showthread.php?t=2051904 but i preaty much dont understand so much cose i am a begener.So the help i am asking is to help me undersatnd the speps an the how to do the most safe rom istallation...Plz help!!!
Ferrarimanos
And my android version is only update it twice from kies...and also i have rooted it my self!!!
Click to expand...
Click to collapse
In exactly this thread Chasmodo described the installation procedure very good. If I give you a step-by-step help it wouldn't be different from Chasmodo's.
And if this is too complicated or you do not have the energy or time to concentrate on it, you should stay on 4.0.4 and wait for the next official update to Jelly Bean.
As beginner who doesn't want to read you are in real danger to hard brick your device.
But maybe you don't even know the "speciality" of the N7000 with it's bricking danger.
ThaiDai said:
In exactly this thread Chasmodo described the installation procedure very good. If I give you a step-by-step help it wouldn't be different from Chasmodo's.
And if this is too complicated or you do not have the energy or time to concentrate on it, you should stay on 4.0.4 and wait for the next official update to Jelly Bean.
As beginner who doesn't want to read you are in real danger to hard brick your device.
But maybe you don't even know the "speciality" of the N7000 with it's bricking danger.
Click to expand...
Click to collapse
well first thank you very much for your quick reply.i read the speps but there was steps only for cn users ! i dont now how to install a cm thats the poit.I show the video also but there was not so much setting on my recovery mode as on his.Also i know the dangers of this prosigure... and thats why i made a post for learning corectly the steps.But if u say that it would be better to wait for the jelly bean official update i trast u but i have the time to learn how to hack my rom...so in the end what u say i will do?
And the steps are not very compicated for me i juts what to learn the from top to the botom.
And something else ... I found that link ----> http://forum.xda-developers.com/showthread.php?t=2076697 the steps that it say is the only steps that it need ??? I mean I am a root member... Do I have to unroot my device ???And I just downloaded CM from rom manager to have more options on the recovery mode... Is that an issue???
Thank u !!!
ferrarimanos said:
And something else ... I found that link ----> http://forum.xda-developers.com/showthread.php?t=2076697 the steps that it say is the only steps that it need ??? I mean I am a root member... Do I have to unroot my device ???And I just downloaded CM from rom manager to have more options on the recovery mode... Is that an issue???
Thank u !!!
Click to expand...
Click to collapse
First u must root your phone. To do that go here http://forum.xda-developers.com/showthread.php?t=1901191
Search for your rom.
It will automaticly root your phone and phil touch recovery.
Sent from my GT-P7500 using xda premium
Its really not hard to unbrick a gt note,heres a video from YouTube on how to install the latest jellybean ROM your gt n7000 note here is the YouTube link. https://www.youtube.com/watch?v=Hw51NGKvsD8&feature=youtube_gdata_player
Sent from my GT-N7000 using xda premium
you do know that all the things you can do on touchwizz spen you will lose? There are alternative apps ofc
your next q will be where are the s-apps, video calling etc, then you know
stop messing with your device
first things first....
read this godly written guides..
http://forum.xda-developers.com/showthread.php?t=1633943
http://forum.xda-developers.com/showthread.php?t=1789397
http://forum.xda-developers.com/showthread.php?t=1329360
now as u r in stock ics 4.0.4 kernel,which is unsafe, flash a safe philz kernel
why philz kernel...because
1.its safe
2.can be flashed via stocked recovery
3.it gives you root+touch based cwm recovery+safe kernel.
now the thing is philz kernel are rom specific so find right kernel for your rom here http://forum.xda-developers.com/showthread.php?t=1901191
if u r following this report back...
fadhil3536 said:
First u must root your phone. To do that go here http://forum.xda-developers.com/showthread.php?t=1901191
Search for your rom.
It will automaticly root your phone and phil touch recovery.
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
I have already rooted my device so what should I do ???
bikil said:
first things first....
read this godly written guides..
http://forum.xda-developers.com/showthread.php?t=1633943
http://forum.xda-developers.com/showthread.php?t=1789397
http://forum.xda-developers.com/showthread.php?t=1329360
now as u r in stock ics 4.0.4 kernel,which is unsafe, flash a safe philz kernel
why philz kernel...because
1.its safe
2.can be flashed via stocked recovery
3.it gives you root+touch based cwm recovery+safe kernel.
now the thing is philz kernel are rom specific so find right kernel for your rom here http://forum.xda-developers.com/showthread.php?t=1901191
if u r following this report back...
Click to expand...
Click to collapse
I am totally convinced about PhilZ !!!! But I don't know what link should I choice ???? Plz help !
ferrarimanos said:
I am totally convinced about PhilZ !!!! But I don't know what link should I choice ???? Plz help !
Click to expand...
Click to collapse
post your device's :
1.kernel version
2.baseband version
3.build number
bikil said:
post your device's :
1.kernel version
2.baseband version
3.build number
Click to expand...
Click to collapse
Baseband version:N7000XXLRK
KERNEL VERSION:3.0.15-1068447
BUILD NUMBER:IMM76D.XXLRT
XXLRK Find a zip file from Phil which have this. Good Luck
ferrarimanos said:
Baseband version:N7000XXLRK
KERNEL VERSION:3.0.15-1068447
BUILD NUMBER:IMM76D.XXLRT
Click to expand...
Click to collapse
flash this http://www.mediafire.com/download.php?4da22i52b4dfhdm

[Q] Clockworkmod recovery, cant find.

Ive been searching all over the Forums, and over google, and haven't found anyway to install clockworkmod recovery on my GT-N7000. So I wonder if you have any links or can tell me how to do it...
Im currently running a rooted LA6 Kernel.
rovkladd said:
Ive been searching all over the Forums, and over google, and haven't found anyway to install clockworkmod recovery on my GT-N7000. So I wonder if you have any links or can tell me how to do it...
Im currently running a rooted LA6 Kernel.
Click to expand...
Click to collapse
Goto Original Android Development forum, search Philz thread and choose a kernel fitting for your Rom.
Install it and you get what you want.
ThaiDai said:
Goto Original Android Development forum, search Philz thread and choose a kernel fitting for your Rom.
Install it and you get what you want.
Click to expand...
Click to collapse
I've been searching through his post for anyone related to LA6, guess i have to install another version.
check you rom.buildnumber and search for it in the thread. as for ICS.. most of the kernel works with any build
please be more particular about the rom buil number and kernel no. so that we can provide a exact link to help you out.. i can't figure out that la6 is gb or ics
Sent from my GT-N7000 using Tapatalk 2

I can flash my country's stock rom, but I can't flash XXLD3.

Why is that? Any idea/solution?
First of all , why can't you flash it ? Any error messages ?
Second(this might be the problem..), is that firmware for your phone ? ( as you might know , sgm2 can be s6500(with nfc) and s6500d(without nfc) ), you must make sure the firmware is for your phone, also make sure to put in in the PDA collumn in odin.
I've got the non NFC model. Odin's flashing operation fails right after " <<ID:0/003>> fat.bin". I've also tried with s6500DXXMK1 in both odin 1.85 and 3.09.
Can u please G i stop spamming by making a lot of threads u can try to use google 1st then u may askbut not that spammy way and idk what's going on with ur phone and I own my S6500D for about 1½ years and I flashed this rom and was an older version from quite a year ago but went back to stock due to non arabic but now it's better to use Cm10.1 for stabilty or If u dont have mount proplems with cwm 6.0.4.5 use cm11 and if u have whitescreen use cm10.1 build 7/7/2013 (which I'm using right know) and u can do some cool editing by xposed framework and if u dont know what is it google it
Sent from my GT-S6500D using xda app-developers app
Mdetring said:
Can u please G i stop spamming by making a lot of threads u can try to use google 1st then u may askbut not that spammy way and idk what's going on with ur phone and I own my S6500D for about 1½ years and I flashed this rom and was an older version from quite a year ago but went back to stock due to non arabic but now it's better to use Cm10.1 for stabilty or If u dont have mount proplems with cwm 6.0.4.5 use cm11 and if u have whitescreen use cm10.1 build 7/7/2013 (which I'm using right know) and u can do some cool editing by xposed framework and if u dont know what is it google it
Sent from my GT-S6500D using xda app-developers app
Click to expand...
Click to collapse
lol, who's dat guy?
Ofc I did a google search before posting in here, do you think that it's easier for me to create a new thread instead of G-search?
Q&A section is about Q&A, that's why it's called Q&A section. You get it now? As far as I create threads for different issue each time, I can create as much threads as I want to, smartass.
Well than , I don't see what's wrong, did you put it in the PDA column in odin ? Is your phone in download mode and successfully detected by odin ? Is anything else besides Auto Reboot and F.Reset Time checked in odin ?
G i said:
lol, who's dat guy?
Ofc I did a google search before posting in here, do you think that it's easier for me to create a new thread instead of G-search?
Q&A section is about Q&A, that's why it's called Q&A section. You get it now? As far as I create threads for different issue each time, I can create as much threads as I want to, smartass.
Click to expand...
Click to collapse
I think (And Im sure) that you are flashing a wrong Stock ROM. I manage a blog of Mini 2 and some peopke have the same problem, because fat.bin is different in every device
Sent from my GT-S6500D using Tapatalk 2
aamj1997 said:
I think (And Im sure) that you are flashing a wrong Stock ROM. I manage a blog of Mini 2 and some peopke have the same problem, because fat.bin is different in every device
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
Oh well, peter said to flash XXLD3 for non-NFC models in order to flash Peter's rom, so I tried to flash XXLD3 but i failed. Then i flashed my country's stock rom and above that I flashed Peter's update and it worked. Thanks for your response though.
G i said:
Oh well, peter said to flash XXLD3 for non-NFC models in order to flash Peter's rom, so I tried to flash XXLD3 but i failed. Then i flashed my country's stock rom and above that I flashed Peter's update and it worked. Thanks for your response though.
Click to expand...
Click to collapse
Remember that usually when fat.bin fail is because you tried to flash the wrong rom
G i said:
lol, who's dat guy?
Ofc I did a google search before posting in here, do you think that it's easier for me to create a new thread instead of G-search?
Q&A section is about Q&A, that's why it's called Q&A section. You get it now? As far as I create threads for different issue each time, I can create as much threads as I want to, smartass.
Click to expand...
Click to collapse
Before I start I will say someting ofc start why the fck did u insult me !!!!!!! And wanna ask u a question do u like to see some1 who is spamming the forum with a lot of questions the answer is NO
In topic :to be honest I dont suggest using peter's rom since there is a lot a custom roms better for our device now I used Peter's Rom before there was even a cm9 or 10 for our device but I went back to stock after 2 days of using peter's rom cause it had some bugs so didnt like it for daily usage my opinion is to use cm11 and if u have whitescreen and sdcard0 mount proplems like me go back to cm10.1 and use build 7/7 (which I'm using now) and u can make it better by installing exposed framework and download tinted status bar module and maybe using Avaite launcher will make it cooler and here is a screenshot of how I'm using my phone and sry for writing alot casue my english isnt very good thought.
Sent from my GT-S6500D using xda app-developers app

Categories

Resources