hey I have been away from note some time now...
so I've tried to read about the BRICK problem..
I just can't figure out if there is any safe ICS ??
dk_iceman said:
hey I have been away from note some time now...
so I've tried to read about the BRICK problem..
I just can't figure out if there is any safe ICS ??
Click to expand...
Click to collapse
As far as I know the LPY was an issue and as long as you don't wipe data/factory reset in that one, than it shuouldn't be a problem either...I'm on LQ2 and have been on LP9 I think and I even accidently wiped data in LP9 and nothing happend. So you should be safe as long as you're not on LPY and like get the LQ2 or LQ3 version.
ICS is safe with a safe kernel i.e. CM9,franco kernel etc which are clear of any wipe bug present in the stock ICS kernels.Hence, the CM9 nightlies,ParanoidAndroid and other ROMs which utilize to CM9 kernels are safe.
Alteratively, you can also flash to GB and then flash a ROM with an unsafe kernel and then flash a safe kernel via PC Odin.It's recommended to go through flashing GB as it reduces risk.However,do this at your own risk
gartner83 said:
As far as I know the LPY was an issue and as long as you don't wipe data/factory reset in that one, than it shuouldn't be a problem either...I'm on LQ2 and have been on LP9 I think and I even accidently wiped data in LP9 and nothing happend. So you should be safe as long as you're not on LPY and like get the LQ2 or LQ3 version.
Click to expand...
Click to collapse
According to my understanding/knowledge none of available ICS official firmware/ROM is safe. Use safe kernels and ROMs mentioned by warfareonly.
warfareonly said:
ICS is safe with a safe kernel i.e. CM9,franco kernel etc which are clear of any wipe bug present in the stock ICS kernels.Hence, the CM9 nightlies,ParanoidAndroid and other ROMs which utilize to CM9 kernels are safe.
Alteratively, you can also flash to GB and then flash a ROM with an unsafe kernel and then flash a safe kernel via PC Odin.It's recommended to go through flashing GB as it reduces risk.However,do this at your own risk
Click to expand...
Click to collapse
Mostly right. Any AOSP kernel is safe - eg CM9. But then you don't get touchwiz, if you want that.
There are a few Samsung based kernels which have the brick bugs removed. They are probably safe - there have been no bricks with them that I know of.
NEVER wipe or format using stock ics kernel (whether from cwm or within android) if you are rooted.
To be completely safe, either use Odin or from a gb kernel. If you are rooted you don't have to flash a full gb rom - just flash abyss 4.2 and then reboot to recovery (do not reboot the device). Then wipe and flash a cwm flashable from from abyss recovery. There is no danger of the brick bug provided the wipes are done through the gb recovery.
Sent from my GT-N7000 using Tapatalk 2
fslateef said:
According to my understanding/knowledge none of available ICS official firmware/ROM is safe. Use safe kernels and ROMs mentioned by warfareonly.
Click to expand...
Click to collapse
Yes,you are right. The kernel must not be official,has to be custom(and not based on lpy) to be safe.
Sent from my GT-N7000 using XDA
I am on stock DDLP8 with stock kernel. I am planning to flash paranoid android. Can anyone confirm if following steps would work properly:
1. I flash franco kernel via PC odin.
2. Flash Paranoid Android using CWM.
Or shall I resort to the longer & safer route of going back to GB first & then flashing paranoid android.
Read the instructions given on the Paranoid Android ROM thread.They clearly state to go back and flash from a GB rom...Here, I've posted the info for you
--->DON'T flash FROM ANY SAMSUNG ICS OR ROMS BASED ON SAMSUNG KERNELS
--->Flash any stock GB rom with odin / or any GB kernel ,root deviceand reboot into recovery once again before flashing this
--->Install Rom: http://d-h.st/agf 119.46 MB
--->Install HYBRID Gapps: http://tjohansson.is-a-geek.com/file...0511-fixed.zip
--->Wipe caches, factory reset is a must if you're coming from another rom than CM9
Next time, read.Safety always
hey
im currently running rooted ICS 4.0.3 XXLQ2 that i rooted with the CF-Root kernal.
My question is, is there an Abyss kernal that i can flash over that with ODIN so i can use it instead?i hear that abyss is safer than CF and you can actually install custom ROMs from it. Also, I'd usually find this info myself but everything i can find about it is a bit confused so i would like a simple yes or no answer
Cheers
Abyss is a GB kernel. DO NOT use it on ICS!
Abyss Note kernel is not compatible with ICS.
ah right OK, some folk are saying that it was compatible with ICS, so I take it my best bet for using custom ROMs would be to flash back to stock GB then flash Abyss, yeah?
EDIt: i meant to say, are there any safe custom kernals out yet for ICS that are ROM flashable and wipe-safe?
"ROM flashable and wipe-safe?"
???
once you have a rooted rom with a custom recovery like CWM then you can flash most kernels. Some kernels arn't compatable with some roms but the thread will usauly indicate which roms work best with the kernel.
I most cases when you are flashing a new ics rom it is not safe to do a full wipe.
I have just upgraded to rocket rom v6 i did not full wipe when flashing but once the rom was up and running i just go back to cwn and do a full wipe, seems to work for me.
Hope this gives you some info on the matter.
olliesmith6121 said:
"ROM flashable and wipe-safe?"
???
once you have a rooted rom with a custom recovery like CWM then you can flash most kernels. Some kernels arn't compatable with some roms but the thread will usauly indicate which roms work best with the kernel.
I most cases when you are flashing a new ics rom it is not safe to do a full wipe.
I have just upgraded to rocket rom v6 i did not full wipe when flashing but once the rom was up and running i just go back to cwn and do a full wipe, seems to work for me.
Hope this gives you some info on the matter.
Click to expand...
Click to collapse
what i meant by wipe safe and rom flashable is that im not gonna brick the phone by doing a factory data wipe or by flashing a custom rom, from what i have read if you flash from pretty much any ICS kernal to a custom rom its an insta-brick
You had the right idea at first. Some ics kernels (eg Franco, cf and speedmod) are probably safe to wipe with. I say probably because they have had the emmc wipe command removed.
But to be guaranteed, reboot into cwm (assuming you are already rooted) then flash abyss 4.2 GB. I use the red version so I can be sure I am flashing from GB.
Then reboot to recovery. Do not reboot the phone - it will not work - but it will happily boot to recovery. You are now in GB recovery and can wipe with no risk of brick bug at all. Flash any cwm flashable rom. Just make sure you had copied it to your SD card before you started this process!!!
Sent from my GT-N7000 using Tapatalk 2
apd said:
You had the right idea at first. Some ics kernels (eg Franco, cf and speedmod) are probably safe to wipe with. I say probably because they have had the emmc wipe command removed.
But to be guaranteed, reboot into cwm (assuming you are already rooted) then flash abyss 4.2 GB. I use the red version so I can be sure I am flashing from GB.
Then reboot to recovery. Do not reboot the phone - it will not work - but it will happily boot to recovery. You are now in GB recovery and can wipe with no risk of brick bug at all. Flash any cwm flashable rom. Just make sure you had copied it to your SD card before you started this process!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
+1
Hi,
im not pretty sure how to flash safely from my ICS to JB (CM10).
Im on RocketROM ICS XXLPY v3 with the Notecore Kernel.
In the developer threads there is mentioned that you have to upgrade from
CM9 or something like that.
I just want to get sure, before bricking my note .
Hope somebody can explain to me which methods are safe and which not.
Thanks !
Laus007 said:
Hi,
im not pretty sure how to flash safely from my ICS to JB (CM10).
Im on RocketROM ICS XXLPY v3 with the Notecore Kernel.
In the developer threads there is mentioned that you have to upgrade from
CM9 or something like that.
I just want to get sure, before bricking my note .
Hope somebody can explain to me which methods are safe and which not.
Thanks !
Click to expand...
Click to collapse
Details here how to install CM9
http://forum.xda-developers.com/showthread.php?t=1627854
First i get CM9 - 07-31-2012. rom PA 0.5 (Abyss kernel 4.2).
When im on CM9 i do this:
- Download the zip (CM10)
- Download Gapps
- Install the update zip from recovery (internal)
- Install gapps (internal)
- WIPE DATA/FACTORY RESET
- Reboot
- DONE !!!
Laus007 said:
Hi,
im not pretty sure how to flash safely from my ICS to JB (CM10).
Im on RocketROM ICS XXLPY v3 with the Notecore Kernel.
In the developer threads there is mentioned that you have to upgrade from
CM9 or something like that.
I just want to get sure, before bricking my note .
Hope somebody can explain to me which methods are safe and which not.
Thanks !
Click to expand...
Click to collapse
Safe methods:
- Flashing from GB kernel ( for CM9 )
- Flashing from custom / non-stock ICS kernel that had the format command removed
- Flashing from CM9 / CM10 kernels
Brick methods:
- Flashing from anything ICS that came from Samsung
Simply follow the instructions in the thread and you'll be fine.
Check if Notecore kernel is "safe". If it is, you're ready to go. If it's not, you need to flash safe kernel first, and then go for CM10.
If you're afraid or anything, you can always go the long way: stock GB via PC Odin > root > CM9 > CM10, although we should really stop using this method now because devs put a lot of work so that we won't have to do it like that.
Okay.
My way, i would try it:
1. Flash AbyssKernel 4.2 over my ICS RocketROM ICS XXLPY v3.
2. Reboot the recovery
3. Flash CM9 and GApps
4. Factory Reset/Data Wipe
5. Reboot
6. Reboot in Recovery
7. Flash CM10 and GApps
8. Factory Reset/Data Wipe
9. Reboot
The only part, which makes me unsure is "Flashing from anything ICS that came from Samsung". You mean the kernel or could RocketROM brick my note cause its from a samsung firmware ? Even if i flash Abyss before ?
Sorry for asking again, but the Note is a expensive device and I dont want to go back to my Lumia 900
Thank you !
This is my metod. All working good on my N7000
My method:
-Flash CM9 kernel with PC Odin
-Boot into CWM and flash CM10+gapps
-wipe/factory reset and wipe dalvik
done
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
can you try go back to stock GB rom.. then upgrade to ICS and root using Dr Ketans method and then install Hydracore
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
jeetu1981 said:
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
Click to expand...
Click to collapse
Hot damn you guys are quick!
Silly me! :silly:
If I install any GB kernal can I then install CM10?
S-pen said:
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Alba Donzo said:
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Click to expand...
Click to collapse
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
S-pen said:
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
Click to expand...
Click to collapse
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
So the official CM10 kernel is a gb kernel? Because remember that is what I'm currently on.
And just to make sure I got you... wipe everything, install kernel (I don't understand what you mean by "go straight to rom flash"), but then not "reboot system", instead "reboot to recovery", then install CM10 rom?
Also, when you say a "full wipe" do you mean that it will erase everything like a factory reset and delete all my apps and everything else? And is there anyway to install CM10 without doing this or is that the only way?
Cm10 kernel is a jelly bean kernel, so gb rom will not run under it.
Full wipe does mean erasing everything. Coming from gb, there is no other way to install, you need a full wipe, remember, you're updating two full revisions of the os, so it's not surprising a full wipe is needed. If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Sent from my GT-N7000 using xda premium
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Click to expand...
Click to collapse
How original was that....
Sent from my GT-N7000 using xda premium
SpyderTracks said:
If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Click to expand...
Click to collapse
Once again, my phone is already rooted... I have mentioned this several times.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
Click to expand...
Click to collapse
You telling me that I can safely go straight to JB from my current GB rom and kernel?
I already have a "nightly" JB rom on my SD card, so just to be clear, all I do is go into CWM recovery, do a "full" wipe (how do I do that by the way?) and install the JB rom from zip?
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
AA1973 said:
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
Click to expand...
Click to collapse
Great! I am downloading the GApps for JB now. How do I install them? I understand that this is also done through CWM recovery, but how do I instal them? do I install the JB rom and reboot to recovery and then just install GApps from zip before rebooting system?
Also, does the full wipe have to be done in CWM recovery, or can I just do the normal wipe on the phone menu before entering recovery?
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
AA1973 said:
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
Click to expand...
Click to collapse
OK install ROM and then install GApps straight away, got it.
Just about the wipe, is it a simple one button wipe that wipes everything, or are there several things that I have to wipe independently? This is the part I'm not too sure about.
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
AA1973 said:
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
Click to expand...
Click to collapse
That's fine. I'll go into recovery and have a look. Thanks for the help that you did give anyway.
It worked! I have been messing around with my new Note on Jellybean and looking through all the settings. It doesn't have project butter (or at least the project wasn't very successful), but still miles ahead of Touchwiz.
Just want to extend a big thanks to everyone that has helped me out. Much appreciated.
Hi guys I'm new to the N7000 forums, but I am no means new to the android and flashing scene. I'm just a bit confused as to how to safely install ROM's on the note.
I've attached a screenshot of my "about phone" so you guys can tell me what kernel I should flash before installing different ROMs
The ROM(s) I'm interested in flashing are Jellybam, Sweet ROM (JB version) and Ultimate jellybean. Can these roms work with any safe kernel? i.e. once iv'e flashed philz or franco kernel I can let the flashing begin.
Also do I need to flash a safe kernel in order to install cyanogenmod or other, not based on stock roms?
Forgot to mention that I am rooted. Any help at all would be appreciated, if I am wrong about anything so far, feel free to set me straight.
Thanks to all who responded, if anyone else wants to reply feel free but i'm going to mark this as resolved so their won't be any confusion.
amd-dude said:
Hi guys I'm new to the N7000 forums, but I am no means new to the android and flashing scene. I'm just a bit confused as to how to safely install ROM's on the note.
I've attached a screenshot of my "about phone" so you guys can tell me what kernel I should flash before installing different ROMs
The ROM(s) I'm interested in flashing are Jellybam, Sweet ROM (JB version) and Ultimate jellybean. Can these roms work with any safe kernel? i.e. once iv'e flashed philz or franco kernel I can let the flashing begin.
Also do I need to flash a safe kernel in order to install cyanogenmod or other, not based on stock roms?
Forgot to mention that I am rooted. Any help at all would be appreciated, if I am wrong about anything so far, feel free to set me straight.
Click to expand...
Click to collapse
if you are on stock kernel then download Philz kernel for LP7, flash that in recovery, should give you root again aswell. then you can flash away to any of the ROMs you listed above. just every time you flash a ROM or think of factory reset or data wiping make SURE you're on a SAFE kernel. that's all
as you are rooted, just install any safe kernel like hydracore or philz. thats all. then you can try out any rom. Just make sure you follow the instruction to flash the rom in the OP
I saw that the Philz kernel has a lot of different versions, which one do I choose, am I right in saying the UBLPC one, as that is my build number? Or any one can work, I also read that you should not flash with the temp CWM, I will admit though I used the temp CWM to flash the root files and i'm still ok but I don't want to take any chances, how do I flash with the stock recovery?
amd-dude said:
I saw that the Philz kernel has a lot of different versions, which one do I choose, am I right in saying the UBLPC one, as that is my build number? Or any one can work, I also read that you should not flash with the temp CWM, I will admit though I used the temp CWM to flash the root files and i'm still ok but I don't want to take any chances, how do I flash with the stock recovery?
Click to expand...
Click to collapse
this is the one you use - PhilZ-cwm6-UBLPC-UUB-2.7
http://www.mediafire.com/file/35d4kd...2.7-signed.zip
the zip file mentioned above can be flashed using stock recovery. Put the file on ext SD card > boot into recovery > apply update from external storage > thats it
nokiamodeln91 said:
the zip file mentioned above can be flashed using stock recovery. Put the file on ext SD card > boot into recovery > apply update from external storage > thats it
Click to expand...
Click to collapse
First, forget about the franco kernel. The franco kernel for the Note is outdated and thus useless. Second, if you plan to flash a JB leak the only kernel you should use is PhilZ. And especially important with the JB leaks is to stick exactly to the instructions how to flash. Otherwise your phone won't even boot.
Have fun with your device! The Note is still an outstanding phone.
Sent from my revived Galaxy Note
Thanks guys for the quick replies, i'm gonna flash the philz kernel now and give the leaked version of JB a try.
make nandroid backup 1st..