Database Develop

[Q] Hard cover?

I'm looking for an hard cover with NO rubber o any other grippy parts... i've possibly found one, but i'd rather have a bit of choice and/or feedback.
Pretty much this is my point: my pockets are big enough for the tab and a cover, i also need a cover. And i do have one... that is made of one of those rubber materials. Works awesome but it makes putting the tab in the pocket (and exctracting it) a long and slow process, one that actually worked with my iPhone because it was such a small device, but not on the tab for obvious reasons
So. Let me point out a few things that this cover shouldn't have:
- grippy material
- transparent material (looks good for a few days, then gets yellow-ish and you see the dirt lodged between the cover and the gadget)
- flashy colors, the tab is already very much an eye grabber without extra help
- bulky. If it's foldable if falls into the bulky category almost surely, remember it has to fit in my pocket
- pouch. That's exactly the kind of thing i forget once the tab is outside it.
Also, leather. I'm very skeptical about leather..... but i'm considering it.
Oh, and you know.... no matter what, it'd need to be shipped to Italy. Amazon.uk would be preferred (looked there, but no description is clear enough about the kind of cover).
Anyway, this is my find: http://cgi.ebay.it/CUSTODIA-COVER-M...t=Accessori_per_Cellulari&hash=item2c5b379a1a
looks fairly nice and meets all my requests, however it's not shown with the tab in it, so i can't tell if it's bulky or what.
Thanks in advance, worst case scenario i pointed out a cover that might interest somebody

Well, if you get a hard plastic one its going to crack if you drop your device.
I have a black one of these and its been perfect so far, it clear, but its black, so its not going to fade, ive had it for 6mths now. Its not grippy per say, but it dose have some friction, you dont want a slippy device do you? It only adds around 3mm to the tab
http://www.ebay.com.au/itm/SOFT-TPU...AU_MobilePhoneAccessories&hash=item1e62d7b957

Uhm. Slippy dosen't really bother me, i hold with two hands every gadget, even an Xperia X10 mini pro, and my grip is pretty good but you do have a point.
Turns out i've never seen/touched anything made with TPU, and i've had experience only with rubber (eww, avoid at all costs) and silicone. This is what i have at the moment...
By any chance do you know if TPU offers more or less grip than silicone? Solner or later i'll have to find out if i like the material, i guess.
Also, i think i've seen the case you linked on amazon.co.uk and that is a good thing.

Bam!
http://www.myincipio.com/Samsung-Ga...xy-Tab-feather-Ultralight-Hard-Shell-Case.asp
I've got one on my Tab and it rocks. Also comes with a the best screen protector I have ever used in my life.

GldRush98 said:
Bam!
http://www.myincipio.com/Samsung-Ga...xy-Tab-feather-Ultralight-Hard-Shell-Case.asp
I've got one on my Tab and it rocks. Also comes with a the best screen protector I have ever used in my life.
Click to expand...
Click to collapse
Wow! Very good candidate, but also really expensive... 35$ + 15 + possible customs fees scares me. But great find, even looks good. This one requires some thinking due to the price, but seems worth considering.
I like where this thread is going
Sent from my GT-P1000 using Tapatalk

No offense to anyone, but the hard shells look cool, but dont offer any protection besides scratch resistance, i recommend the TPU case, as they are cheap, work well, and if you don't like it, well it was only $5

natious said:
No offense to anyone, but the hard shells look cool, but dont offer any protection besides scratch resistance, i recommend the TPU case, as they are cheap, work well, and if you don't like it, well it was only $5
Click to expand...
Click to collapse
Still it's better than nothing, and that's what's going to have the tab if i can't comfortably fit it in my pocket
However i put some thought into this thing, and i might just end up purchasing the one i found and a cheap TPU one, to see how it is.
And still open to suggestions anyway

You might try looking at the Speck Candyshell case. I can't say I own it but all of the reviews I've seen are pretty favorable. It has a soft rubber lining to protect the Tab which sounds nice. It also comes in black, white, or purple in case you care about color.
Here's the Amazon Link: http://www.amazon.com/Speck-Product...2?ie=UTF8&s=electronics&qid=1307155322&sr=8-2

Nice!!!
Sent from my GT-P1000 using XDA App

what do you think about this one :
http://forum.xda-developers.com/showpost.php?p=14867317&postcount=94

R317DY said:
what do you think about this one :
http://forum.xda-developers.com/showpost.php?p=14867317&postcount=94
Click to expand...
Click to collapse
Interesting, but size matters. That sort of thing would completely ruin the portability of the thing
Sent from my Transformer TF101 using Tapatalk

jesand83 said:
You might try looking at the Speck Candyshell case. I can't say I own it but all of the reviews I've seen are pretty favorable. It has a soft rubber lining to protect the Tab which sounds nice. It also comes in black, white, or purple in case you care about color.
Here's the Amazon Link: http://www.amazon.com/Speck-Product...2?ie=UTF8&s=electronics&qid=1307155322&sr=8-2
Click to expand...
Click to collapse
I own one of these and the lip that protrudes around the screen does grip in pockets.
This is not the droid case you are looking for. *waves hand around like obi-wan*
Sent from my SCH-I800 using XDA App

TPU Hybrid case with kickstand for Samsung Galaxy Note II (Review w/ Pics)

Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".

Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...

BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!

i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?

I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app

well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!

yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol

Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand

....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!

one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...

I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app

jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!

This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.

for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too

Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium

No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case

The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.

Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium

They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.

LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.

anyone seen a case like this?

saw this when browsing cases for my wifes s3. Does anyone know of a case like this for the Note 2 that isn't insanely expensive? Main part is the lip that comes up a decent amount above the screen to protect the screen when the phone hits the floor.
http://www.ebay.com/itm/Blue-Black-...291874?pt=PDA_Accessories&hash=item564f2943e2

robl45 said:
saw this when browsing cases for my wifes s3. Does anyone know of a case like this for the Note 2 that isn't insanely expensive? Main part is the lip that comes up a decent amount above the screen to protect the screen when the phone hits the floor.
http://www.ebay.com/itm/Blue-Black-...291874?pt=PDA_Accessories&hash=item564f2943e2
Click to expand...
Click to collapse
Check these out:
http://www.ebay.es/sch/i.html?_nkw=...+note+2&_osacat=0&_trksid=p3286.c0.m270.l1313

I'm basically looking for the same thing, I'd rather be safe then sorry if it hits the floor face down. Also looking for a cheap price point, hopefully less than 20-25
I found some cases, search Note II hybrid on ebay(stolen from another thread)
here is the link(New member restriction)
http://ww w.ebay.com/sch/i.html?_trksid=m570.l3201&_nkw=note+II+hybrid&_sacat=0

mitchillen said:
I'm basically looking for the same thing, I'd rather be safe then sorry if it hits the floor face down. Also looking for a cheap price point, hopefully less than 20-25
I found some cases, search Note II hybrid on ebay(stolen from another thread)
here is the link(New member restriction)
http://ww w.ebay.com/sch/i.html?_trksid=m570.l3201&_nkw=note+II+hybrid&_sacat=0
Click to expand...
Click to collapse
I feel the same way. I'm nervous about dropping my device. The note 2 was actually a gift from my partner, hehe. So I want to take extra good care of it. I even wanted to buy the Otterbox Defender case which would make it a tank. I had that case for my iPhone 3G and it turned it into a tank / brick. So I'm going to stay away from it.
I did buy the Seidio Active Case for my Note 1, and it was a GREAT case. I loved it! It made it thicker, but it wasn't that bad. So I'd suggest a case like that. I wouldn't the Case Mate pop case either, but it's not out yet. Or I'm waiting for the Speck Pixel HD Case. That will make my day! I loved that case so much on my iPhone 4. Great protection, great design. Great case. Until then, I'm going to keep using the original cases and the cheapo cases.
Anyways, good luck! Share your findings / or review your cases I am kind of a case freak. I love cases! :$

CaseMate Pop is available at at&t stores but it's ridiculously expensive.
Sent from my SGH-T889 using xda premium

jlczl said:
CaseMate Pop is available at at&t stores but it's ridiculously expensive.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Yeah.... I'm in Europe No AT&T in Spain.
I think AT&T got an exclusive perhaps? I mean, why else would Case-Mate NOT want to put it up on their website and sell 100 times more across the globe?
Feeling charitable? Only a few clicks!http://forum.xda-developers.com/showthread.php?t=2013416

robl45 said:
saw this when browsing cases for my wifes s3. Does anyone know of a case like this for the Note 2 that isn't insanely expensive? Main part is the lip that comes up a decent amount above the screen to protect the screen when the phone hits the floor.
http://www.ebay.com/itm/Blue-Black-...291874?pt=PDA_Accessories&hash=item564f2943e2
Click to expand...
Click to collapse
This is pretty close and comes with a kickstand. The only thing I do not like is the hard shell is 2 piece and might be a pain to remove once you install it. The softshell just stretch over the hard shell. Looks like an otterbox defender with raise screen lip.
http://www.ebay.com/itm/For-Samsung...408949?pt=PDA_Accessories&hash=item5d369fec75
This one looks pretty good too an easy on and off. I think I will order this one.
http://www.ebay.com/itm/BK-White-Ha...659917?pt=PDA_Accessories&hash=item5aebe43bcd

Okay so I just got this case
http://www.ebay.com/itm/330832732520?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#rpdId
I will try to post some useful info but I DO NOT have my note 2 yet, it is coming tomorrow.
Here goes to a half-assed review
1) The TOP CORNERS are not protected at all. They are protected by the somewhat thin, soft, flexible material and not protected by at least the outer plastic part like on the bottom and that's a problem. I am guessing corners should be protected the most because that is what causes the screen to crack(unless it faceplants)
2) I am NOT SURE about the how trustworthy the lip is because I NEVER had a case on a smartphone and my samsung vibrant was like an unbreakable brick. From my experience of looking at products through videos,pictures,etc. the lip does not seem like it will bring enough protection for a faceplant.
Unfortunately, I will ask for a refund.
P.S. The shipping part was very fast, the only thing that will make this seller a 6/5 would be if I get a refund
Hope this helps some of you out in your decision

Great I just ordered this case in white and blue yesterday
mitchillen said:
Okay so I just got this case
http://www.ebay.com/itm/330832732520?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#rpdId
I will try to post some useful info but I DO NOT have my note 2 yet, it is coming tomorrow.
Here goes to a half-assed review
1) The TOP CORNERS are not protected at all. They are protected by the somewhat thin, soft, flexible material and not protected by at least the outer plastic part like on the bottom and that's a problem. I am guessing corners should be protected the most because that is what causes the screen to crack(unless it faceplants)
2) I am NOT SURE about the how trustworthy the lip is because I NEVER had a case on a smartphone and my samsung vibrant was like an unbreakable brick. From my experience of looking at products through videos,pictures,etc. the lip does not seem like it will bring enough protection for a faceplant.
Unfortunately, I will ask for a refund.
P.S. The shipping part was very fast, the only thing that will make this seller a 6/5 would be if I get a refund
Hope this helps some of you out in your decision
Click to expand...
Click to collapse

stay away from the dual layer "mesh" like ones on that link. really CRAP
the other ones the fishbone style ones are actually shockingly nice considering how cheap they are. they are NOT easy to take apart again without breaking (slow careful and once you pop the joint use a thumbtack to pop each successive joint)
but they are surprisingly nice.
you can get a case ology case like the one you posted for the Note II I am still waiting for case ology to get on the ball and make the impact case (with the 2 arcs on the back) that I like and use on all my phones when possible.
I also got a Jelly Tank case from korea. its a one piece hybrid but VERY protective. not "as" protective of the screen as I would like but so far very impressed with it.

I got these because of the good protection on the corners and front:
http://www.amazon.com/s/ref=nb_sb_n...Case+for+Samsung+Galaxy+Note+II+Note+2+N7100+

Got the "Hybrid" case from ebay and it sucks. Inside hard shell is doesn't fit so the phone moves around a creaks. Hard to use the buttons and makes it too think. I think I migh try the Ionic Guardian case next.
http://www.ebay.com/itm/400343071194?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

one80oneday said:
Got the "Hybrid" case from ebay and it sucks. Inside hard shell is doesn't fit so the phone moves around a creaks. Hard to use the buttons and makes it too think. I think I migh try the Ionic Guardian case next.
Click to expand...
Click to collapse
Which one exactly

robl45 said:
Which one exactly
Click to expand...
Click to collapse
http://www.ebay.com/itm/400343071194?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

I got the one with the mesh looking back, it's okay especially for the price

Are cases really necessary for the Note 2? Share your experience

Hi all
I just ordered a Note 2 and, by all the comments on cases around here, I wonder if I should hurry to also get a case.
But the point is: is it really necessary?
- A case makes this big phone even bulkier.
- A case can compromise ports access, external audio quality and the gps/nfc/... receptions
- A good case can cost a lot of money
- I won't find a case around the corner (at least, here in Brazil). I must buy it online, maybe pay for shipping and wait for like a month for it to come to me.
Hey, I don't want to be critical to the ones who feel important to use a case. Just want to start some discussion here
My point of view:
I'm retiring an old Motorola Defy. It has never used any kind of case or screen protector and its condition is quite good. It is always in my pocket (a lot of times sharing the space with a bunch of keys) and it has fallen to the ground some times, from like the pocket height for instance.
I know the Note 2 is a different phone, so thats the point of the question. I've never had another Samsung phone, so I may not have the right idea about the durability of it.
So, I'm looking forward to your thoughts and experiences on using (or not using) protective cases for the Note 2.
I would prefer not to have one, but I would mostly get one if this really happens that Samsung did a fragile phone and it is important to get external protection.

100% need a case. I got my note 2 weeks ago and bought a genuine Samsung case which is skim anyway. Protects the screen and back from scratches. Plus no case makes it slippery and one drop will mean destroyed phone. Good luck mate!
Sent from my GT-N7105T using xda premium

Brayden87 said:
100% need a case. I got my note 2 weeks ago and bought a genuine Samsung case which is skim anyway. Protects the screen and back from scratches. Plus no case makes it slippery and one drop will mean destroyed phone. Good luck mate!
Sent from my GT-N7105T using xda premium
Click to expand...
Click to collapse
Hi Brayden87, thanks for the reply.
I've seen the samsung case on the Note 1. It really is slim.
It actually is so slim I wonder it really does protect the phone. Would you say it can make the difference upon a drop?
This is one I would like to get... probably easier to find too.

For the love of god get a case. I have a cover for that it a back plate with a leather flap that goes over the screen, and a screen protector. My wife has a full case for hers.
I dropped my. Screen smashed. She drops hers a few times not one scratch.
After I get a DIY new screen off amazon. Im buying am otter box. (Rogers send broken screens to samsung and costs $280. Or a DIY is only $16)
http://m.otterbox.com/Samsung-Galax...alaxy Note 2&gclid=CIeUxu_IgbcCFcFAMgodE1kAMQ
Sent from my SGH-I317M using xda app-developers app

plugsmustard said:
For the love of god get a case. I have a cover for that it a back plate with a leather flap that goes over the screen, and a screen protector. My wife has a full case for hers.
I dropped my. Screen smashed. She drops hers a few times not one scratch.
After I get a DIY new screen off amazon. Im buying am otter box. (Rogers send broken screens to samsung and costs $280. Or a DIY is only $16)
http://m.otterbox.com/Samsung-Galax...alaxy Note 2&gclid=CIeUxu_IgbcCFcFAMgodE1kAMQ
Sent from my SGH-I317M using xda app-developers app
Click to expand...
Click to collapse
Hi plugsmustard.
Very interesting experience. It seems that this phone is really more fragile than my Defy. I don't doubt that, it is so much larger and thinner, it looks like it may brake easily. Its just that Samsung should be salling a phone that is fairly resistant to the day-to-day misshapenings...
But these otterbox are very expensive and would have to find a retailer that ships to Brazil. Can I trust Ebay sellers?
Isn't it too bulky?
What are the least requirements for a good protective case?

Note 2 size is big so I do not want case for it. Only a carbon back cover for better handling and protect camera. When bezel is scratched, I replace it for 5$. Perfect way for me .
Sent from my GT-N7100

ursoouindio said:
But these otterbox are very expensive and would have to find a retailer that ships to Brazil. Can I trust Ebay sellers?
Isn't it too bulky?
What are the least requirements for a good protective case?
Click to expand...
Click to collapse
You can purchase knock-off Otterbox cases from eBay, as well as others such as the Griffin Survivor case (fake, but still provides great protection) Casemate Tough and the Urban Armor Gear Note 2 case, etc.
Above-mentioned cases have been thoroughly reviewed by the one and only Vectron, and are viewable here http://forum.xda-developers.com/showthread.php?t=2192333

I got the body glove tpu... slim and sexy. Dropped my phone about 4ft high and didn't get any damage. Of course could be just luck. Phone is big and slick without a case. I would get a slim tpu type of case if you are worried about bulk. It gives a little more protection than naked.

ursoouindio said:
Hi all
I just ordered a Note 2 and, by all the comments on cases around here, I wonder if I should hurry to also get a case.
But the point is: is it really necessary?
- A case makes this big phone even bulkier.
- A case can compromise ports access, external audio quality and the gps/nfc/... receptions
- A good case can cost a lot of money
- I won't find a case around the corner (at least, here in Brazil). I must buy it online, maybe pay for shipping and wait for like a month for it to come to me.
Hey, I don't want to be critical to the ones who feel important to use a case. Just want to start some discussion here
My point of view:
I'm retiring an old Motorola Defy. It has never used any kind of case or screen protector and its condition is quite good. It is always in my pocket (a lot of times sharing the space with a bunch of keys) and it has fallen to the ground some times, from like the pocket height for instance.
I know the Note 2 is a different phone, so thats the point of the question. I've never had another Samsung phone, so I may not have the right idea about the durability of it.
So, I'm looking forward to your thoughts and experiences on using (or not using) protective cases for the Note 2.
I would prefer not to have one, but I would mostly get one if this really happens that Samsung did a fragile phone and it is important to get external protection.
Click to expand...
Click to collapse
For the love of all that is good and holy, get a case. And you don't need to go crazy buying an expensive one or waiting forever for a HK distributor. I own a bunch of cases because I love to swap 'em out, but my go-to case (and one of the least expensive cases I've bought is the Duzign Sentinel from from eBay that I got for $7.00 from a seller named senyx. The auctions are non-stop and I often see them ending at the opening bid of $7.00, like when I got mine. Shipping is free and the seller is in CA, so you get it quickly:
http://www.ebay.com/itm/Duzign-Sent...t=US_Cell_Phone_PDA_Cases&hash=item20d25bad89
It's been discussed on other threads, but this one has a cool H.R. Giger alien look to it, offers awesome protection, and it has, in my opinion, the best TPU inner layer of any case (it's got a nice thick lip to protect the screen of your Note 2 in case of an unlucky fall). Heck the TPU is a great case by itself, and the outer shell comes with a kickstand for horizontal viewing. the Sentinel is identical to the Cruzer Lite Spi-Force case which sells for about $20. Just don't get the black/white as the white does get dirty pretty quickly. Mine is black on black and besides my UAG and bamboo cases, it easily gets the most compliments.
That is my .02 . . . hope it helps.

Not that it's particularly delicate, but it is particularly expensive.
If you don't buy a case, I expect the first bit of damage to trigger a new thread "Scratched by $600 phone! Damn!"

Hi everybody.
Thanks for all the opinions. These Duzign Sentinel do seem quite robust and not that bulky. The looks are quite odd (comparing to the original sober looks of the phone) but are not that bad...
That is the kind of price I would pay without feeling that I am paying a lot to have a bulkier phone.
I wont bother much if the bezel gets scratched. My main concern is the screen integrity.
I do have one year warranty (which I do not know if covers external damage :/) and, if something happen, I could always go DIY to try to fix it. The biggest problem would be the phone become useless for weeks :/
I do agree that it is important to feel safer with such expensive phone.
At the other hand, is hard to believe that Samsung, which is leading against Apple in such quality fight, still delivers such a fragile gadget and even dont provide a reasonable protection option as an accessory. That is very awkward.

Case-mate Tough seems very nice and is found at US$ 10.99 on Amazon. Too bad it doesn't ship to Brazil.
http://forum.xda-developers.com/showthread.php?t=2104132
Any other suggestion of worldwide retailers? Ebay?

apallohadas said:
Not that it's particularly delicate, but it is particularly expensive.
If you don't buy a case, I expect the first bit of damage to trigger a new thread "Scratched by $600 phone! Damn!"
Click to expand...
Click to collapse
Haha . . so true. I know it's dorky, but I remember my grandmother always telling me: "an ounce of prevention is worth a pound of cure." Well, in this case, a $10 case is worth a $100 deductible.
---------- Post added at 04:12 PM ---------- Previous post was at 03:31 PM ----------
ursoouindio said:
Case-mate Tough seems very nice and is found at US$ 10.99 on Amazon. Too bad it doesn't ship to Brazil.
http://forum.xda-developers.com/showthread.php?t=2104132
Any other suggestion of worldwide retailers? Ebay?
Click to expand...
Click to collapse
Actually cheaper through Case-Mate because shipping is free if you have Amazon Prime. This other seller requires a $3.99 surcharge. Still, $14.64 is a good deal. Returns or problems would probably be handled much better through original retailer, as well.

ursoouindio said:
Hi all
I just ordered a Note 2 and, by all the comments on cases around here, I wonder if I should hurry to also get a case.
But the point is: is it really necessary?
- A case makes this big phone even bulkier.
- A case can compromise ports access, external audio quality and the gps/nfc/... receptions
- A good case can cost a lot of money
- I won't find a case around the corner (at least, here in Brazil). I must buy it online, maybe pay for shipping and wait for like a month for it to come to me.
Hey, I don't want to be critical to the ones who feel important to use a case. Just want to start some discussion here
My point of view:
I'm retiring an old Motorola Defy. It has never used any kind of case or screen protector and its condition is quite good. It is always in my pocket (a lot of times sharing the space with a bunch of keys) and it has fallen to the ground some times, from like the pocket height for instance.
I know the Note 2 is a different phone, so thats the point of the question. I've never had another Samsung phone, so I may not have the right idea about the durability of it.
So, I'm looking forward to your thoughts and experiences on using (or not using) protective cases for the Note 2.
I would prefer not to have one, but I would mostly get one if this really happens that Samsung did a fragile phone and it is important to get external protection.
Click to expand...
Click to collapse
Good question. I had the flip case but it sucks and I dropped my phone twice and got two nice dents. I ordered a simple case for like 5 bucks just so the back doesn't feel slippery and what not. I do not use a screen protector, it'll be fine.

I bought the seidio active case and a glass screen protector before I even bought the note ii. This is a very expensive phone, I wouldn't use it and not buy some kind of protection. Seidio has an updated case call surface case but it didn't work with the glass screen protector cause the inside hard case would rub against the screen protector and push it up.The active case work great it's very slim and has a holster. Well long story short, I dropped my phone many times and nothing has broke or cracked. My job is physically demanding and its easy to bump or drop. Alot of my coworkers has cracked screens or has broken there phone.
Sent from my SGH-T889 using xda premium

ursoouindio said:
Hi Brayden87, thanks for the reply.
I've seen the samsung case on the Note 1. It really is slim.
It actually is so slim I wonder it really does protect the phone. Would you say it can make the difference upon a drop?
This is one I would like to get... probably easier to find too.
Click to expand...
Click to collapse
I think you're confused with another case, I have the protective cover+ and it's probably 2-3mm thick. Adds barely any thickness to the note 2 and looks awesome. Cost me $30. I didn't want a big case and this one is perfect for me. Covers everything you want covered.
Sent from my GT-N7105T using xda premium

Brayden87 said:
I think you're confused with another case, I have the protective cover+ and it's probably 2-3mm thick. Adds barely any thickness to the note 2 and looks awesome. Cost me $30. I didn't want a big case and this one is perfect for me. Covers everything you want covered.
Sent from my GT-N7105T using xda premium
Click to expand...
Click to collapse
just confused with Samsung original cover (which I have seen only on the Note 1)
do you have any link or photos of yours?
Thanks!

I like to reference this article when anyone asks me this question:
http://phandroid.com/2013/01/03/samsung-galaxy-note-2-cases/
It's a nice real world example.

Brad.S. said:
I like to reference this article when anyone asks me this question:
http://phandroid.com/2013/01/03/samsung-galaxy-note-2-cases/
It's a nice real world example.
Click to expand...
Click to collapse
Very interesting indeed. And very nice looking bumper btw. This metallic bumper wouldn`t interfere on the device antennas?
I will consider these as well... I wonder how they compare to full body cases such as Duzign Sentinel, Speck Candyshell or Case-mate Tough.

I didn't feel like I needed a case at all. Till I dropped it. Twice. The rear cover went flying and so did the battery. Phone held up flawlessly, but i didn't like the flying parts. So I bought a cute Incipio case from androidcentral.com

Looking for a "grippy" protective case with non slip back

I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!

dengood1 said:
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Duzign-Sentin...1378141878&sr=8-3&keywords=duzign+case+note+2
This case has been discussed by many on this forum and it has good reviews. It is definitely protective and grippy. You can even tell from the back rubbery design. If you want something slim, with a soft matte feel, i'd get the Six Abundant Case: http://www.amazon.com/DBA-Cases-Abu...=1378141992&sr=8-1&keywords=six+abundant+case

Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

dengood1 said:
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
You're very welcome

opasha said:
You're very welcome
Click to expand...
Click to collapse
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
From all the reviews and things I have heard about it, it seems to be in the middle. A hard rubber. So it's good for shock absorption. Definitely not a soft rubber because that would wear out very easily. However, from what everyone in the forums have said and from the amazon reviews, it seems like it will stay in place without issue. Also, it's only $10 and from amazon. If you don't like it, you can ship it back the same day for a full refund without any cost to you. Just keep the original box/packaging.
Here's a quote from someone who has it: "The back part of the case (the black exterior) feels more like silicone than plastic which gives it a nice look and grip. I have dropped my phone once on this case and I have to say that this case does a very good job on absorbing impact."

dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.

Brad.S. said:
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Click to expand...
Click to collapse
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.

opasha said:
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
Click to expand...
Click to collapse
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?

Brad.S. said:
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Click to expand...
Click to collapse
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.

opasha said:
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
Click to expand...
Click to collapse
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.

Brad.S. said:
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Click to expand...
Click to collapse
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.

opasha said:
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
Click to expand...
Click to collapse
I never printed any cases for my Note 2, just the inserts for the UAG case with lettering and glow in the dark filament etc. I did make four cases for my gf's S3 but in the end she moved to a pink folio wallet case (which would take too much time to make haha). I've since then had two dead SD cards.. So I've lost a lot of pictures (backups are my priority every 24hrs now..). The cases were more of a "wow factor" type of thing. Everywhere we went people asked more about her case than my huge phone lol.. Lead to a lot of explanations of what a 3D printer is.. But After a few times on/off of the case they'd get weak and start to crack at random layers of which the printer printed it (our printer has a resolution of 0.001mm).
Started sanding the area of the Sentinel case today that I hacked out with the razor to make it smoother. Only had about ten minutes with some 1600grit paper, so I got one side pretty smooth!
I wanted to pledge money to the kreyos smart watch but got worried that I'd be stuck with money in the air for it and no item on my wrist until next summer.. The galaxy gear is definitely going to be watched (pun intended)! As long as it stays within $200-300..
As you can tell, it's hard for me to commit to some purchases lol!
To op: I remember seeing some peel & stick grip strips for phones. They were just thin clear gel-type adhesive strips. Been looking for them but can't find the review. Honestly, I'd also like a grippy case..
Edit: found it! www.egrips.com/ check it out.

Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app

dengood1 said:
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Try the DBA Cases Ultra protection cases very good quality and good feel
http://www.dbacases.com/samsung.html

I have the UAG case. I have used the UAG line of cases for all my phones and they are solid. They have the bevel in the front so if it drops face down you wont shatter your screen and it has extra cushion on the corner bumpers. They are only $30 - $35 online. They fit on my OEM samsung dock with spare batttery charger.
The reason why I trust all my phones in the UAG case is that my wife's nephew through my note down the escalator at the mall. My heart stopped as I saw it tumble and bounce off every step. When I went to get it, the phone and case didnt have a scratch on it. The otterboxes are great but they are way too big. Especially for our note.

I am using a cheap eBay tpu. Smoke clear and it is rubber. It works great and protects just fine. Best of all it was only a buck and a half! Rubber does a pretty decent job of keeping it from sliding around unless it is on something very slick. keeps good in the hand too
Sent from my kraken (Note2) using xda app

I have the body glove from sprint.
I feel it offers the best for daily use and it has pocketablility which is nice. It doesn't get hung up as it has a glossy surface at the bottom of the phone.