Remics-JB USB-Connection problem - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi all!
I have huge problems with establishing USB-connection with my I9000 to PC.
I'm using Remics-JB 3.0.1.
When I connect my phone via USB-cable to PC, error message "System-UI needs to be closed" appears. Notification bar is then gone. After 5-10 seconds notification bar is back and it begins with the error message again. This loop continues even when the phone gets disconnected from PC. Only way to end this is a reboot. PC doesn't see the phone at all. On Remics-JB 2.x everything was fine.
I already tried to do one more clean flash (all wipes etc.) and use other kernels. No effect.
I would be grateful if someone could repost this to here: http://forum.xda-developers.com/showthread.php?t=1804032 because I'm not allowed yet to post to devs threads.
Thanks

ddc87 said:
Hi all!
I have huge problems with establishing USB-connection with my I9000 to PC.
I'm using Remics-JB 3.0.1.
When I connect my phone via USB-cable to PC, error message "System-UI needs to be closed" appears. Notification bar is then gone. After 5-10 seconds notification bar is back and it begins with the error message again. This loop continues even when the phone gets disconnected from PC. Only way to end this is a reboot. PC doesn't see the phone at all. On Remics-JB 2.x everything was fine.
I already tried to do one more clean flash (all wipes etc.) and use other kernels. No effect.
I would be grateful if someone could repost this to here: http://forum.xda-developers.com/showthread.php?t=1804032 because I'm not allowed yet to post to devs threads.
Thanks
Click to expand...
Click to collapse
Did you flashed anything after flashing the rom?
FYI - you should have asked the question in q/a section rather than general section.

erpurohit said:
Did you flashed anything after flashing the rom?
FYI - you should have asked the question in q/a section rather than general section.
Click to expand...
Click to collapse
just gapps, nothing more...

try re flashing rom

erpurohit said:
try re flashing rom
Click to expand...
Click to collapse
Done...no changes

did you wipe data or just reflashed...

erpurohit said:
did you wipe data or just reflashed...
Click to expand...
Click to collapse
Data wipe, cache, dalvik - did allof them...also did it before (1st post).
UPD.: I also flashed Circle Battery Mod from Update Me...but on V 2.x everything also worked fine with it...

Just flashed the ROM one more time WITHOUT flashing this Circle battery mode - USB connection is OK!
Never thought this mod would cause such problem

ddc87 said:
Just flashed the ROM one more time WITHOUT flashing this Circle battery mode - USB connection is OK!
Never thought this mod would cause such problem
Click to expand...
Click to collapse
That's what mate the circle mod from update me is old one.... if you want the circle mod then use from from the add on site.

Related

so my brother brought me his semi bricked n7000 "btw i searched and googled"

so my brother brought me his semi bricked n7000 "btw i searched and googled"
well, yesterday my brother brought me his cellphone which doesn't boot anymore, he wanned to install a custom rom since he saw that i have a fast one (galaxy s I)
so when i asked him what he did , he said he followed all the steps in rootgalaxynoteDOTcom/galaxy-note-roms/kingdroid-ics-rom-v3-0-for-galaxy-note-gt-n7000-best-ics-romtouchwiz-ux/[/url]
but then, his phone didn't boot, so he wiped - reset factory setting, which i read is a BIG NO when you're flashing ICS.
so whats done is done, i am trying to get it back , i can boot in recovery mode/download mode ... i tried out many kernels like AbyssNotekernel42RedTouchCustomLogo or speedmod, and downloaded at least 4 or 5 GB stock roms.
sadly , if odin flash is successful, it stuck on (samsung galaxy note gt-n7000) black srcreen, reboots few times then stays still...
if the odin flash wasn't successful , it keeps stuck on data.img and never goes beyond that .
i did all the steps i could find, wiped data after installed stock GB rom and rebooted, nothing worked
i even used rogue_ET-recoveryonly , and i think it went along format all the way, but still nothing happened after that.
the only thing i haven't tried yet was the repartition + pit file, i couldn't find the PIT , most of the roms have pda/modem/csc ... so if anyone can help out, i would really appreciate it ..
thanks
First thing you should do is check other threads about that around here.
If you can get it into download mode, you could give flashing with Odin a try. If it doesn't get stuck at factory.fs, then you're not superbricked.
If it does get stuck, then you have 2 more hopes:
- HOPE 1
- HOPE 2
If those don't work either...I'm afraid it's off to the Samsung Service center for a shiny new motherboard.
Best of luck to you and hope you get your Note up and running as soon as possible...
thanks, no it doesn't get stuck at factoryfs at all , i did check out most of the threads here, and most of them say "go back to GB with odin and if its stuck on samsung gt-n7000 boot screen just go back with recovery mode and then wipe data / cache " but never worked, so i thought i should ask around here
i'll check out the threads you posted and see what i can come up with
weird, i used the 16gb pit - repartition (check)
and i flashed it with SGN_XX_OXA_KJ1_FACTORYFS through odin.
and its still the same, the flashing with odin was successful and everything went fine, no hanging , no delays or what so ever. after it restarts its stuck on the black samsung galaxy note gt-n7000 screen
im gonna wipe data / cache again but i doubt that would fix anything.
so any idea what could be wrong? specially when the flashing process went fine?
i've already tried like 4 stock roms ,
arabic uae , europe , saudia and the SGN_XX_OXA_KJ1_FACTORYFS
i wonder if i need to put something in boot space in odin "just a thought"
ive tried downloading roms from here [STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest ICS LQ3
and here [STOCK ODEX PRE ROOTED ROMs] for Odin PC no counter & triangle
any ideas?
For OP:
If you are not stucking while flashing from PC Odin then you are not superbricked.
I think you got corrupted /system or other partition; I saw another thread where OP was getting this sort of hang due to filesystem corruption which can't mount.
Entropy512 gave simple dd command based solution for erasing initial 1MB of partition.
Try searching for corrupted filesystem/partition related information. I can't recall exact thread title, sorry.
I hope this will help.
I found the post/thread for you to check: http://forum.xda-developers.com/showpost.php?p=27102526&postcount=16
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
johar123 said:
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
Click to expand...
Click to collapse
Should try to install/reinstall samsung usb driver package. or try reinstall Kies also provide drivers for Note.
If driver is install properly: when connect with PC using usb cable it need to be shown under hardware management as something like "android composite adb interface" or something like that.
johar123 said:
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
Click to expand...
Click to collapse
Also are you trying to connect adb after booting the phone ? Means in a stuck state ? I think you can try enabling ADB thing from CWM rather than trying to boot phone fully.
hmm i can't find an option in CWM that suggests that , still searching
also im trying to find roms that i can install from CWM , are there any GB roms that can be directly installed from CWM ?
thanks.
johar123 said:
hmm i can't find an option in CWM that suggests that , still searching
also im trying to find roms that i can install from CWM , are there any GB roms that can be directly installed from CWM ?
thanks.
Click to expand...
Click to collapse
Hi: I understand he means boot the phone into CWM and then connect to PC in that environment. adb need to be run from PC while the phone is booted into CWM recovery.
Still, most of the custom roms are in the .zip format and can be install using CWM. they just now become a bit more difficult to find since dev move on to ICS/CM9 roms. Still try to find some GB roms in the forum such as: rocket GB, litening GB, xtralite GB....
This is the link for Rocket rom GB. Better try v22 than v23.
http://forum.xda-developers.com/showthread.php?t=1380284
Check rom:
http://download.checkrom.com/roms/a...oteHD_V3.zip?iframe=true&width=950&height=420
cheers,
forest1971 said:
Should try to install/reinstall samsung usb driver package. or try reinstall Kies also provide drivers for Note.
If driver is install properly: when connect with PC using usb cable it need to be shown under hardware management as something like "android composite adb interface" or something like that.
Click to expand...
Click to collapse
done that already.. everyone is saying is "get into recovery mode" >.>
johar123 said:
done that already.. everyone is saying is "get into recovery mode" >.>
Click to expand...
Click to collapse
Yes, recovery mode is in CWM. (in case you have not done it: Enter recovery by,from phone power off: pressing volumeup + home + power and release power when see samsung letter while still hole the other two buttons.)
forest1971 said:
Hi: I understand he means boot the phone into CWM and then connect to PC in that environment. adb need to be run from PC while the phone is booted into CWM recovery.
Still, most of the custom roms are in the .zip format and can be install using CWM. they just now become a bit more difficult to find since dev move on to ICS/CM9 roms. Still try to find some GB roms in the forum such as: rocket GB, litening GB, xtralite GB....
cheers,
Click to expand...
Click to collapse
thanks for the reply, i've done it many times, when im in the CWM screen, the adb devices still doesn't show anything >.> maybe im using a wrong kernel? what kernel you guys suggest?
johar123 said:
thanks for the reply, i've done it many times, when im in the CWM screen, the adb devices still doesn't show anything >.> maybe im using a wrong kernel? what kernel you guys suggest?
Click to expand...
Click to collapse
hmm. that should be still the problem with usb driver. Have you checked under hardware management if it show the device as "samsung composite adb interface" yet?
kernel should not be the problem with connecting adb. It is the problem with usb driver for Note. Sometime Win7 have problem with driver. You may want to search for another package of samsung usb driver on the web.
I did put some links of GB roms in the post in the previous page. maybe try them first if any luck.
Also try to restart computer to see if the driver issues get solved.
Got to go. Hope that you can solve the problem. GL.
forest1971 said:
hmm. that should be still the problem with usb driver. Have you checked under hardware management if it show the device as "samsung composite adb interface" yet?
kernel should not be the problem with connecting adb. It is the problem with usb driver for Note. Sometime Win7 have problem with driver. You may want to search for another package of samsung usb driver on the web.
GL.
Click to expand...
Click to collapse
thanks, i restarted my pc , reinstalled kies, and now it shows under device manager
now i connect to the phone through adb , i appreciate you pointing it out
which method you think i should go for 1st? this one
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
or unzipping a rom and then pushing it all through adb?
i think i'll go for removing and repartitioning manually, hopefully it'll work
thanks again guys , i'll post the updates here,
lol, my brother called me and he's like "if u can't fix it by the end of the night, fk it, dont bother yourself with it" but to be honest, im too stubborn, i hope i can fix it
looks like deleting and adding partitions back through parted kinda work, for the first time i was able to pass the boot screen after i installed rocketrom from CWM
however, its been 1/2 hour since im stuck on rocketrom loading screen it keeps looping and looping.. i wonder if i should wait more.. or should i try another rom?
finally got rid of the verification -.- was kinda annoying thats why i didn't bother editing posts,
anyways, rocketrom didn't work, so i decided to flash a stock rom instead , the flash through odin went fine, it was great to be able to wipe data without getting stuck , however, it keeps going though samsung animation over and over, i think im gonna leave it like this one the charger till morning, i wonder if it'll be the same
guess i have to google for "samsung loop" , i wonder why this keeps happening though -.-
-.- leaving it for 6 hours on samsung logo animation didn't do the trick , still looping when i woke up, so i guess i'll do some more search on why this is happening.
You have checked partitions and see no error that means the problem lies somewhere else, not partitions. I have no idea yet, but for me I would try some different roms. Small roms have more chance to work, that is the feedback I got from some people:
- try check rom in the link I sent
- try paranoid android which is CM9, or asylum
- extralite
cheers.
forest1971 said:
You have checked partitions and see no error that means the problem lies somewhere else, not partitions. I have no idea yet, but for me I would try some different roms. Small roms have more chance to work, that is the feedback I got from some people:
- try check rom in the link I sent
- try paranoid android which is CM9, or asylum
- extralite
cheers.
Click to expand...
Click to collapse
thanks buddy, i appreciate your help, the partition "USED" to give me error when i did the check 9 10 11 , but after removing the partition and reformatting them (and i also removed the cache partition) now its working fine "i suppose" i didn't do another check, but i might will now that you mention it.
i already tried rocket rom, didn't work, stock rom didn't work, so i'll give the others a try at least it doesn't get stuck on the boot screen, but its stuck on the animation logo which is an improvement
thanks again

[Q] HELP !!! Charging issue and always getting stuck !!

Hello everyone
my phone was not getting charged, i went to the samsung service and they said me that something's wrong with the battery so i got it replaced today and still the battery is not getting charged !! :| I tired different chargers but still the same problem. My phone is still in warranty and i am going to the samsung service again ! Any idea whats wrong with my phone??
and yeah one more problem, when ever i install a JellyBean custom rom and if i restart the phone its getting stuck on the samsung logo !! I tired flashing roms (Ultimate Jellybean and Angry v3 ) its getting stuck after reboot :| so please if anyones knows whats wrong with my phone, please let me know !!!
Thank You ! :fingers-crossed:
If you really bought a new battery and it's not charging in every charger you tested:
the new battery isn't so new
or
all chargers are broken.
And to your problem with JB:
http://forum.xda-developers.com/showthread.php?t=2075188
In your own thread post 9 with your own answer might help again
ThaiDai said:
If you really bought a new battery and it's not charging in every charger you tested:
the new battery isn't so new
or
all chargers are broken.
And to your problem with JB:
http://forum.xda-developers.com/showthread.php?t=2075188
In your own thread post 9 with your own answer might help again
Click to expand...
Click to collapse
i bought the battery from the samsung store, I guess its a new :\ about the chargers i have a s2 as well and its charging perfectly with the same chargers
thanks, ill check out the thread
ThaiDai said:
And to your problem with JB:
http://forum.xda-developers.com/showthread.php?t=2075188
In your own thread post 9 with your own answer might help again
Click to expand...
Click to collapse
Oops, i created that thread and forgot about it Sorry my bad
i know how to go back to ics now , but i want Jellybean. Thats y i flashed JB again and im getting the same problem :\ can anyone say me how to fix that ?
xp3rto said:
Oops, i created that thread and forgot about it Sorry my bad
i know how to go back to ics now , but i want Jellybean. Thats y i flashed JB again and im getting the same problem :\ can anyone say me how to fix that ?
Click to expand...
Click to collapse
are you able to use you USB port/cable at all? can you connect the pc to the phone ?
if not; Id say your usbport is borked.
Anthropostar said:
are you able to use you USB port/cable at all? can you connect the pc to the phone ?
if not; Id say your usbport is borked.
Click to expand...
Click to collapse
Yeah i'm able to connect the phone to the pc
xp3rto said:
Yeah i'm able to connect the phone to the pc
Click to expand...
Click to collapse
k, so and JB roms are getting stuck at boot huh.
what i would do:
I'd say
->fire up Odin, flash a kernel that includes CWM. (dunno what kernel youve been using, but lets start all over)
->Reboot -> reboot into (cwm) recovery, and flash the superuser (SU) package again.
#-If all that succeeded (you are now properly rooted);
->in CWM make a backup.
->flash a CM 10.1 kernel
->flash any JB (4.2) rom.
#-Once all that succeeded, reboot.
->If your JB rom loads succesfully hopefully youll see your device charging.
->If not, reboot into recovery again, make sure your device has been plugged in long enough to have loaded the battery (maybe not shown in stats).
-> in CWM choose Clear battery stats.
Thats what i'd do.
Anthropostar said:
k, so and JB roms are getting stuck at boot huh.
what i would do:
I'd say
->fire up Odin, flash a kernel that includes CWM. (dunno what kernel youve been using, but lets start all over)
->Reboot -> reboot into (cwm) recovery, and flash the superuser (SU) package again.
#-If all that succeeded (you are now properly rooted);
->in CWM make a backup.
->flash a CM 10.1 kernel
->flash any JB (4.2) rom.
#-Once all that succeeded, reboot.
->If your JB rom loads succesfully hopefully youll see your device charging.
->If not, reboot into recovery again, make sure your device has been plugged in long enough to have loaded the battery (maybe not shown in stats).
-> in CWM choose Clear battery stats.
Thats what i'd do.
Click to expand...
Click to collapse
Ill give this a try and let you know
Anthropostar said:
k, so and JB roms are getting stuck at boot huh.
what i would do:
I'd say
->fire up Odin, flash a kernel that includes CWM. (dunno what kernel youve been using, but lets start all over)
->Reboot -> reboot into (cwm) recovery, and flash the superuser (SU) package again.
#-If all that succeeded (you are now properly rooted);
->in CWM make a backup.
->flash a CM 10.1 kernel
->flash any JB (4.2) rom.
#-Once all that succeeded, reboot.
->If your JB rom loads succesfully hopefully youll see your device charging.
->If not, reboot into recovery again, make sure your device has been plugged in long enough to have loaded the battery (maybe not shown in stats).
-> in CWM choose Clear battery stats
Thats what i'd do.
Click to expand...
Click to collapse
Im not able to install the JB rom :| My phone restarts when the installation is about to complete.
ThaiDai said:
If you really bought a new battery and it's not charging in every charger you tested:
the new battery isn't so new
or
all chargers are broken.
And to your problem with JB:
http://forum.xda-developers.com/showthread.php?t=2075188
In your own thread post 9 with your own answer might help again
Click to expand...
Click to collapse
I bought a new charger today and my phone is charging Thanks

[Q] USB or bluetooth connection doesnt work with JellyBean by Nathan

I am using custom rom Jellybean by Nathan. I am using NIMS kernel. I cannot connect to pc using USB or bluetooth. I tried to uncheck debugging but still not working. I reinstalled device controlers and nothing changed. Kies not working too. Downloading mode neither. Can somebody help me?
Hi vlamacko!
I'm on the same NaTHaN's ROM but with Space Kernel and all goes like a charm...
Good luck
Sent from my GT-S5830
vlamacko said:
I am using custom rom Jellybean by Nathan. I am using NIMS kernel. I cannot connect to pc using USB or bluetooth. I tried to uncheck debugging but still not working. I reinstalled device controlers and nothing changed. Kies not working too. Downloading mode neither. Can somebody help me?
Click to expand...
Click to collapse
Fist of all you could try to flash other kernel, if it doesn't work try to re-flash the rom I recommend you BE version
Space Kernel
BajoPrimate said:
Hi vlamacko!
I'm on the same NaTHaN's ROM but with Space Kernel and all goes like a charm...
Good luck
Sent from my GT-S5830
Click to expand...
Click to collapse
I found on forum that Space Kernel is best of kernels for this rom so I tried it but my phone froze booting up first time after flashing. I was showing booting screen (SWAG text) for about 20 minutes so I has to turn it off. How long you had to wait? I cleared cache after flashing Space Kernel. Can be that problem?
No matter what thanks
BE
Viper The Ripper said:
Fist of all you could try to flash other kernel, if it doesn't work try to re-flash the rom I recommend you BE version
Click to expand...
Click to collapse
I tried to flash BE but phone won't boot it up after start up. PSN BE booted up (same as space kernel) but problem with USB connection stayed. Any ideas?
vlamacko said:
I found on forum that Space Kernel is best of kernels for this rom so I tried it but my phone froze booting up first time after flashing. I was showing booting screen (SWAG text) for about 20 minutes so I has to turn it off. How long you had to wait? I cleared cache after flashing Space Kernel. Can be that problem?
No matter what thanks
Click to expand...
Click to collapse
I installed it following the OP's instructions - without erasing or clearing anything-. I had to wait only about three minutes for first boot. All goes very well, no problems at all.
Good luck!

[GUIDE] How to revive HTC Salsa from a bricking

Credits to-
BigBearEvo- For making important modifications.
kashttl- For informing about errors with ROM Toolbox.
Introduction-
In simple language, bricking is just making your phone unusable. But as we go deeper in this world of rooting, we find ourselves reading posts with terms like “soft-brick” and “hard-brick”. So what is the difference?
Hard-brick
Hard-brick is when you mess up with your boot image while updating, or when you snatch your phone's USB cable while an update is going on through PC. Or even worse, you flash a ROM @ 0% battery.
Soft-brick
Soft-brick is when you fail to clear your Dalvik, forget to format/wipe data, which leads to your phone going into a bootloop i.e- keeps playing bootanimation for a long time (15 mins or more). This generally happens when there is some mismatch of Android Virtual Machine with installed apps. Or for us, the phone is stuck in White HTC logo screen.
So how to get your phone back to life in case of-
Hard-brick
Sorry boss but your phone is dead. Reviving it will be more expensive than buying a new one. Also this task is done only by a few specialists.
Hard brick can be solved in case of improper flashing of RUU or updates on Stock Phones. you require USB drivers to be installed along with HTC Sync.
You Need the proper RUU designed for your area model.
Load phone into Bootloader screen. Run RUU from PC. you may have to do this several times and follow instructions carefully. You will eventually you load the RUU and have a working phone.
This isn't for the Noob to do. Recommendation is see a service engineer, or seek good help from users that have done this. each Hard brick can be different, dependent on what they did in the first place
Soft-brick
Hmmmm.. Something can be done-
A> First pull out your battery.
B> Put it back.
C> Press Power and Volume Down simultaneously till you enter fastboot screen.
D> Get into recovery mode.
Now you have 2 options-
i> Restore to one of your previous backups.
ii> Flash stock ROM or some other stable ROM.
Precautions while flashing-
A>Firstly DO NOT flash using ROM Toolbox or apps with similar functionality. (Credits- kashttl). People from HTC Desire forum faced a lot of hassle in doing so.
B> Don't just snatch your USB Cable while transferring ZIP file from PC to SD card. It will lead to CWM recovery Errors.
C> Have at least 50% battery charge in your phone before flashing any ROM, minimal level is 20% as 5% battery is used when flashing.
D> Always do a Triple wipe before flashing ROM. (Data/Cache/Dalvik)
E> Always do a Nandroid backup of current ROM before changing into a custom one. (Recovery or Rom manager)
F> Follow any other special instructions (If any) while flashing.
G> If you end up with any problems with a certain ROM, please post in the ROM thread ASAP.
Disclaimer-
YOU the users are solely responsible for anything you do. We the developer supply this for your benefit. Failure to follow the rules/guides will possibly result in defective or inoperable phones which we are not responsible for.
Amazing guide. Bookmarked for future use
Btw thanks for mentioning me
Sent from my HTC Salsa C510e using xda app-developers app
kashttl said:
Amazing guide. Bookmarked for future use
Btw thanks for mentioning me
Sent from my HTC Salsa C510e using xda app-developers app
Click to expand...
Click to collapse
You do something good for us and you surely get mentioned.
Sent from my GT-P3100 using Xparent Cyan Tapatalk 2
WOah! dude, you got a sticky man! Awesome!
stuck at exclamation mark
Hey there, I'm following the soft brick steps but it got stuck at the exclamation mark logo after i get into the recovery mode. what should i do? please help
Remove battery count to ten. Reinsert and boot normally. I'm assuming you have tried to update with and ota. This will not work and u will constantly get this screen and problem.
BigBearEvo said:
Remove battery count to ten. Reinsert and boot normally. I'm assuming you have tried to update with and ota. This will not work and u will constantly get this screen and problem.
Click to expand...
Click to collapse
I tried it but my phone keeps playing the bootanimation over and over again
Remove battery and get to hboot menu. Hold volume down key then then power on while holding down.
If u have recovery, boot into it and wipe everything. If not, factory reset on hboot and try to reboot. Seems what ever u did has buggered it and u have to start over.
BigBearEvo said:
Remove battery and get to hboot menu. Hold volume down key then then power on while holding down.
If u have recovery, boot into it and wipe everything. If not, factory reset on hboot and try to reboot. Seems what ever u did has buggered it and u have to start over.
Click to expand...
Click to collapse
Thanks BigBearEvo i did what you asked me and the phone works fine now. Some of the data may have lost but its okay. Thanks again!
Hi Vigoos,
I tried the steps you have mentioned above, but i dont have any backups saved. Can you please let me know what is the procedure to flash a stock ROM.
Thanks.
ravikeerthi88 said:
Hi Vigoos,
I tried the steps you have mentioned above, but i dont have any backups saved. Can you please let me know what is the procedure to flash a stock ROM.
Thanks.
Click to expand...
Click to collapse
Depends on the stage you got to. did you try to flash an RUU for your area? if you did it would have wiped your recovery program off. if your didnt and still have cwm installed, please go to another rom that takes your fancy and follow flashing guides from there. more info would be helpful though.
BigBearEvo said:
Depends on the stage you got to. did you try to flash an RUU for your area? if you did it would have wiped your recovery program off. if your didnt and still have cwm installed, please go to another rom that takes your fancy and follow flashing guides from there. more info would be helpful though.
Click to expand...
Click to collapse
Hi BigBearEvo,
I tried to flash a RUU but the USB was not detectable in the Fastboot mode so the CWM recovery is still intact. Will try the the other option though.
Thanks
ravikeerthi88 said:
Hi BigBearEvo,
I tried to flash a RUU but the USB was not detectable in the Fastboot mode so the CWM recovery is still intact. Will try the the other option though.
Thanks
Click to expand...
Click to collapse
If the USB wasn't detectable it means your pc/laptop does not have the correct programs installed to find it. IE adb etc & java sdk/jdk installed.
try the other methods first though as it should work out easier
Hi BBE,
I was able to flash your Xsense ROM, but after some time it gives force close errors for some of the applications. Please let me know if i have missed anything.
Thanks
ravikeerthi88 said:
Hi BBE,
I was able to flash your Xsense ROM, but after some time it gives force close errors for some of the applications. Please let me know if i have missed anything.
Thanks
Click to expand...
Click to collapse
some force error closes happen from clash of apps, did you completely wipe it....what ext extension are you using?
BigBearEvo said:
some force error closes happen from clash of apps, did you completely wipe it....what ext extension are you using?
Click to expand...
Click to collapse
Hi BBE,
Yes i did a triple wipe before flashing. I'm using ext 3.
ravikeerthi88 said:
Hi BBE,
Yes i did a triple wipe before flashing. I'm using ext 3.
Click to expand...
Click to collapse
when using the rom did u activate links2sd while using int2-ext or data2sd?

i9001 bricked?

Hi guys, i gonna tell you about how my i9001 was stuck in a bootloop. Maybe you could help me. I'm sick of it.
Cause: I installed cm10 and cwm5 or 6 as recovery and upgrade my device using Ota Updater. When I restarted my i9001, it got stuck in a bootloop.
What my i9001 can display: It can access to rampdump mode and download mode. In case I try to turn on my i9001 or access to recovery mode the Samsung logo/word is shown twice and stops showing anything else. It often gets stuck showing the typical grey battery flat (with a loading stopped) and the black screen alternately. This is caused when I a disconnect the USB cable from my computer/laptop.
Attempts: i've tried everything except for the right solution. Lots of forum threads and nothing works for me. I've tried:
1.- Boot_loader for device boot.
2.- I've flashed an stock rom: XXKQP, and 2 more: BVKPC y XXKQ1. Each one are official.
3.- And then recovery-clockwork-5.5.0.4 and -6.0.1.2.
4.- I've tried, then, flashing feamodrecovery 1.2.
5.- Nothing works for me.
I've been using Odin 4.43. AriesVE in OPS section and when flashing these roms: one package. For recovery packages: one package and pda (I tried these two options).
I can't reach at recovery mode. Any help would be greatly appreciated. Greetings!
have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
When phone boots there's nearlz always a solution
Sent from my GT-I9001 using xda app-developers app
slow--welder59, any of these solutions helped me. I tried with any other combination of combos but nothing happened. I didn't know to use adb method. I installed adb drivers but it didn't detect my device. When I entered to download mode and pressed Install (in the program) tried to download something but it stopped.
Any suggestion?
Can anyone help me? I want to exhaust all possible options.
zerohhorez said:
Can anyone help me? I want to exhaust all possible options.
Click to expand...
Click to collapse
What happens when you try to format data from recovery...?
If you get some errors, write them here...
If everything goes well, then it is not what im expecting (in that case problem is probably easier to solve)...
sava92ns said:
What happens when you try to format data from recovery...?
If you get some errors, write them here...
If everything goes well, then it is not what im expecting (in that case problem is probably easier to solve)...
Click to expand...
Click to collapse
The problem is just this. I cannot go to recovery mode. Just shows Samsung twice and powers off.
zerohhorez said:
The problem is just this. I cannot go to recovery mode. Just shows Samsung twice and powers off.
Click to expand...
Click to collapse
Can you open 'Download mode'?
sava92ns said:
Can you open 'Download mode'?
Click to expand...
Click to collapse
Yes I can, and that's the reason why I don't give up hope. However, I've tried installing some stock roms and recoveries and nothing worked for me.
Try one of the following (or both even if your desperate):
http://forum.xda-developers.com/showthread.php?t=1922505 (broodROM RC5 download link) [recomended]
http://broodplank.net/old/flashsamsungi9001.php (skip chapter 5 as it doesn't apply) [if that doesn't work]
edit:: USB Drivers: http://forum.xda-developers.com/showthread.php?t=961956
stepie22, thank you for your help. Nothing worked for me.
First link: another typical manual for installing a stock rom via Odin. During the process my device powered off. It was supposed to reboot. After the process ended, i disconnected it from PC and its screen showed a grey empty battery (with a loading in the middle) and word "Samsung" alternatively.
Second link: this was the solution for my first brick. Then, my device showed this yellow triangle. This second time is annoying me. I haven't found any solution to change, at least, the behaviour of my device.
Any other different solution? Thnks guys.
zerohhorez said:
Then, my device showed this yellow triangle.
Click to expand...
Click to collapse
See this ... if that is the triangle, find that part on the wiki page.
Maybe your device got the eMMC Bug?
Normally your Device would be hardbricked if you "over" flashed.
If nothing works out try this:
Have a look in this thread:
http://forum.xda-developers.com/showthread.php?t=2224029
Download CWM Recovery 6.0.2.8 ODIN Package and flash it in "Download Mode" the regular way (AriesVE.ops and onepackage).
Then maybe you are able to enter Recovery Mode again...
This might be not your problem, but you could give it a try:
Some people had issues with rebooting in recovery, so there is a fix in this post
http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
Hopefully one helps you!
Greetings

Categories

Resources