Related
I want to edit the system.sqhs and insert new fonts.
someone know how to do it?
in linux
unsquashfs system.sqsh
here is a tutorial
http://forum.xda-developers.com/showthread.php?t=610303
Maikeu Locatelli said:
in linux
unsquashfs system.sqsh
here is a tutorial
http://forum.xda-developers.com/showthread.php?t=610303
Click to expand...
Click to collapse
Hey Maikeu,
Is there a tutorial something like that except for topaz maybe? I can successfully unsquashfs the XDAndroid 2.1 system.sqsh just fine...but when I try to unsquashfs the 1.6 (TopazKernal16) system.sqsh, it makes it to about 70% then stops saying "Killed".
If you could point me in the right direction for help, that would be great! If it makes a difference, I'm actually using Vector Linux instead of Ubuntu.
Thanks!
iceman198 said:
Hey Maikeu,
Is there a tutorial something like that except for topaz maybe? I can successfully unsquashfs the XDAndroid 2.1 system.sqsh just fine...but when I try to unsquashfs the 1.6 (TopazKernal16) system.sqsh, it makes it to about 70% then stops saying "Killed".
If you could point me in the right direction for help, that would be great! If it makes a difference, I'm actually using Vector Linux instead of Ubuntu.
Thanks!
Click to expand...
Click to collapse
Ok...it took me forever but I figured it out...
Just a couple things to note (in case anyone else is trying to do this)...when you "unsquash" the system.sqsh, it creates a "squashfs-root" folder where everything is. Move all that stuff up a folder so it's all in the "system" folder and you can delete the "squashfs-root".
Also, when using "mksquashfs" make sure to use " -nolzma" at the end...Don't quite know what it is, must be something with compression because I notices the end sqsh file is slightly bigger...but that's what you have to tag on so when booting Android it can actually mount the sqsh file.
iceman198 said:
Hey Maikeu,
Is there a tutorial something like that except for topaz maybe? I can successfully unsquashfs the XDAndroid 2.1 system.sqsh just fine...but when I try to unsquashfs the 1.6 (TopazKernal16) system.sqsh, it makes it to about 70% then stops saying "Killed".
If you could point me in the right direction for help, that would be great! If it makes a difference, I'm actually using Vector Linux instead of Ubuntu.
Thanks!
Click to expand...
Click to collapse
Sorry, i never tried and i dont understand a lot of this to help you, i know only how to unpack and repack, really sorry.
Have a lot of people that know, but i dont know why, they dont help us.
i know that the squashfstools 4 dont works, it unpack, but the repack dont works in kernel of pphusson, the 3.3.7 works good for me
http://ftp.debian.org/debian/pool/main/s/squashfs/
iceman198 said:
Ok...it took me forever but I figured it out...
Just a couple things to note (in case anyone else is trying to do this)...when you "unsquash" the system.sqsh, it creates a "squashfs-root" folder where everything is. Move all that stuff up a folder so it's all in the "system" folder and you can delete the "squashfs-root".
Also, when using "mksquashfs" make sure to use " -nolzma" at the end...Don't quite know what it is, must be something with compression because I notices the end sqsh file is slightly bigger...but that's what you have to tag on so when booting Android it can actually mount the sqsh file.
Click to expand...
Click to collapse
is rename the "squashfs-root" to "system" is good enough ?
yosidia said:
is rename the "squashfs-root" to "system" is good enough ?
Click to expand...
Click to collapse
yeah, that will work...but you can just keep it the same name without every creating a "system" folder. I don't even bother using the "genext2fs" tool...I just "unsquashfs" it and it will create the "squashfs-root" folder and then when I'm done modifying it, just
Code:
mksquasfs squashfs-root system.img -nolzma
and that should do it.
You'll know if it doesn't work cuz Android will error while loading system.sqsh. =)
-wrong topic-
As you all already know, if you use this, you can check your current firmware:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
It displays link to downloadable KDZ file, that can be downloaded by any web browser:
OK *************** LGP970 APOLTL ************* 20110514 V20N_00 http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/APOLTL/V20n_00/V20N_00.kdz http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/APOLTL/V20n_00/V20N_00.kdz GLOBAL/GLOBAL N N EL GSM
Click to expand...
Click to collapse
But when we enter:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/cs_auth_model_check.jsp?esn=IMEI
It displays something like this:
OK 35677********** LGP970 APOLTL ************* 20110514 V20n_00_5 http://csmg.lgmobile.com:9002/ezls/MESSW/LGP970/POL/SWP/5/BIN_LGP970AT-00-V20n-EUR-XXX-DEC-31-2011+0.zip
Click to expand...
Click to collapse
It's direct link to firmware in BIN/FLS format that can be used with SmartFlash to unbrick or fast flashing our phones.
Unfortunately we can't download this file with our web browser.
Is there any possibility to "cheat" LG servers, by modyfying HTTP packets (or something) to let us download this firmware?
radkor said:
As you all already know, if you use this, you can check your current firmware:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
It displays link to downloadable KDZ file, that can be downloaded by any web browser:
But when we enter:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/cs_auth_model_check.jsp?esn=IMEI
It displays something like this:
It's direct link to firmware in BIN/FLS format that can be used with SmartFlash to unbrick or fast flashing our phones.
Unfortunately we can't download this file with our web browser.
Is there any possibility to "cheat" LG servers, by modyfying HTTP packets (or something) to let us download this firmware?
Click to expand...
Click to collapse
I think that only B2B is able to download from there. It`s about security, username and password.
scamex said:
I think that only B2B is able to download from there. It`s about security, username and password.
Click to expand...
Click to collapse
B2C only downloads kdz files. You only need to check out its userdata, and you will find it in there.
So I also dont know, how to get the bin files. I bet that anyone has either gotten them from a friendly LG customer service worker, or he/she him-/herself is a LG worker.
what means the code after OK IMEI...... LGP970 APRTTL 110K ...... DATE when you put the IMEI .... it`s show`s when the IMEI was first time activate or it show`s when the IMEI was created ? thanks
Do you mean this: DEC-31-2011+0.zip?If so, it means, when the software was finished, I think.
N00BY0815 said:
Do you mean this: DEC-31-2011+0.zip?If so, it means, when the software was finished, I think.
Click to expand...
Click to collapse
nope , i mean this code OK 3597XXXXXXXX LGP970 APRTTL 110KPXXXXXX 20111028(THIS DATE) V20n_00_3 http://csmg.lgmobile.com:9002/ezls/...IN_LGP970AT-00-V20n-EUR-XXX-DEC-31-2011+0.zip
because after a month i buy this phone i see the case has 2 seals , one above other and now the phone it`s in service due the one dead pixel and i think the phone has other problems and might be returned to the store from other costumers and i`ve buy`ed a returned one , this it`s my concern , thanks
radkor said:
It's direct link to firmware in BIN/FLS format that can be used with SmartFlash to unbrick or fast flashing our phones.
Unfortunately we can't download this file with our web browser.
Is there any possibility to "cheat" LG servers, by modyfying HTTP packets (or something) to let us download this firmware?
Click to expand...
Click to collapse
After lg update client extracted the kdz file, we'll get cab file and then it get extracted again and we get p970.dll and wdb file. I've check p970.dll and it has reference to AP download and CP download. If the update client did download the AP and CP file, a tcpdump or wireshark capture during the update might be useful. But more likely it just convert wdb to AP and CP using p970.dll before flashing the phone. That we need lg's proprietary tool to do the conversion.
Also, judging from url, i think the link is just for reference for their technian or something like that.
Sent from my LG-P970 using XDA App
adxgrave said:
After lg update client extracted the kdz file, we'll get cab file and then it get extracted again and we get p970.dll and wdb file. I've check p970.dll and it has reference to AP download and CP download. If the update client did download the AP and CP file, a tcpdump or wireshark capture during the update might be useful. But more likely it just convert wdb to AP and CP using p970.dll before flashing the phone. That we need lg's proprietary tool to do the conversion.
Also, judging from url, i think the link is just for reference for their technian or something like that.
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
is there any ideas/method that we can bypass the LG survaillence and get the bin/fls files?
I really want to get this:
http://csmg.lgmobile.com:9002/ezls/...IN_LGP970AT-00-V20b-454-XXX-DEC-31-2011+0.zip
adxgrave said:
After lg update client extracted the kdz file, we'll get cab file and then it get extracted again and we get p970.dll and wdb file. I've check p970.dll and it has reference to AP download and CP download. If the update client did download the AP and CP file, a tcpdump or wireshark capture during the update might be useful. But more likely it just convert wdb to AP and CP using p970.dll before flashing the phone. That we need lg's proprietary tool to do the conversion.
Also, judging from url, i think the link is just for reference for their technian or something like that.
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
but why someone can get v10/v11's bin and fls files?
http://www.freeflashing.net/index.php?topic=218.0
Maybe it's a leak from support service.
netum said:
Maybe it's a leak from support service.
Click to expand...
Click to collapse
Will anyone leak v20 ?
exe127 said:
Will anyone leak v20 ?
Click to expand...
Click to collapse
Maybe. Look here: http://forum.xda-developers.com/showthread.php?t=1467575
This is where I got the v20b bin/fls. Maybe someone inside open it on purpose. There were a lots of other tools in there, unfortunately it's inaccessable now.
Sent from my LG-P970 using XDA App
adxgrave said:
Maybe. Look here: http://forum.xda-developers.com/showthread.php?t=1467575
This is where I got the v20b bin/fls. Maybe someone inside open it on purpose. There were a lots of other tools in there, unfortunately it's inaccessable now.
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
the v20B you got seems is indian version. Have you seen the hongkong version in that site before?
Nope.
Sent from my LG-P970 using XDA App
adxgrave said:
Nope.
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
OMG
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI lin doesn't work.... i wrote my emai and the pae is blank. can u help me?
Hey guys,
I tried something interesting today. I upgraded to the latest official firmware with the LG Mobile Update and it appears, that the .fls and .bin files are loaded into memory by LGUserCSTool.exe when the upgrading process starts. I verified this by dumping its memory and looking inside with a hex editor. That means the newest firmware .fls and .bin can be taken from there.
I had a hard time finding out where the files ended inside the dump, though. Also the bin file seems to be in multiple parts (LGP970_AP[0].bin, LGP970_AP[1].bin etc). So in the end, I didn't quite get there, but maybe someone more knowledgeable can improve on this?
Nice finding man. Somewhere to start. I've tried direct download with encoded url but failed miserably. Lol.
Sent from my LG-P970 using XDA App
Try sniffing communication between LG and update. Also probably you need to have correct useragent set.
I tried that too. LG Update uses 2 user agents, none of them give access to the bins. Besides, the regular updater only downloads the kdz file which is available to everyone.
Hi i have this message on smartphone
an pop up with
PDA : I8190XXAMA2
phone : XXXX
CSC :I8190QUXAMA1
H/W : not active
RF cal Date : NONE
SMD :
CAMERA :N/A,FrontCAM :N/A
TSP :0X11
TSK :0X19
Band : Unknown,CH :N/A
UART :N/A,USB :N/A
UN : nuber and lettre
can any one help to restore it thank you
spawk said:
Hi i have this message on smartphone
an pop up with
PDA : I8190XXAMA2
phone : XXXX
CSC :I8190QUXAMA1
H/W : not active
RF cal Date : NONE
SMD :
CAMERA :N/A,FrontCAM :N/A
TSP :0X11
TSK :0X19
Band : Unknown,CH :N/A
UART :N/A,USB :N/A
UN : nuber and lettre
can any one help to restore it thank you
Click to expand...
Click to collapse
Flash original stock
Sent from my GT-I8190 using xda app-developers app
from the pm you sent me...
package_extract_file("boot.img", "/dev/block/mmcblk0p20");
package_extract_file("recovery.img", "/dev/block/mmcblk0p21");
package_extract_file("cache.img", "/dev/block/mmcblk0p11");
package_extract_file("STE_boot1.img", "/dev/block/mmcblk0p24");
package_extract_file("STE_boot2.img", "/dev/block/mmcblk0p24");
Click to expand...
Click to collapse
Did you just flash an update .zip that included the boot.img and the recovery.img?!
Im pretty sure that you should not do that!
Why are the the 2 Ste_boot. imgs being flashed to the same location? or there in the first place?
From the info you posted above it seems like the Partitions are pretty much messed up.
If you cant get into download mode then there is no way you can fix it.
I ended up having a brick from a CWM touch recovery (not yours) I couldn't fix and I ended up flashing stock everything and rerooting.
Sent from Spaceball One.
I can reboot into download mode and i can flash rom stock or other I have lost internal disque ( is shown but with no exacte size I have -100000000 in size for the internal storage if i can flash with an full erras this can fix ?
spawk said:
I can reboot into download mode and i can flash rom stock or other I have lost internal disque ( is shown but with no exacte size I have -100000000 in size for the internal storage if i can flash with an full erras this can fix ?
Click to expand...
Click to collapse
Dam! You ****eup the internal memory !flash official rom with the pit file to re partition the device.
faria said:
Dam! You ****eup the internal memory !flash official rom with the pit file to re partition the device.
Click to expand...
Click to collapse
I have find this tool Samsung_Format_Utility_V1.4 now i try it and see if any one have solution pleas give it
in another web site talk about flashe with 3 files ( csc , phone , pda ) and talk about working after performe this but all firmware are on ONE files how I get Official firmware with this 3 files ?
spawk said:
I have find this tool Samsung_Format_Utility_V1.4 now i try it and see if any one have solution pleas give it
in another web site talk about flashe with 3 files ( csc , phone , pda ) and talk about working after performe this but all firmware are on ONE files how I get Official firmware with this 3 files ?
Click to expand...
Click to collapse
Do not format your device with any tools if you don't know what they do.
The device has a single flash chip, repartitioned into several Partitions, if you attempt to format you will format the partition table, then the device will require a new motherboard.
Those 3 files are separate partitions instead of one tar, quite common in other devices.
I would try to repackge the original images into separated tars,something like this....
boot.img as boot.tar
modem bin as phone.tar
cache.image as csc.tar
system.img and all remaning .img files, as pda.tar
then flash the all together via odin with repartition.
faria said:
Do not format your device with any tools if you don't know what they do.
The device has a single flash chip, repartitioned into several Partitions, if you attempt to format you will format the partition table, then the device will require a new motherboard.
Those 3 files are separate partitions instead of one tar, quite common in other devices.
I would try to repackge the original images into separated tars,something like this....
boot.img as boot.tar
modem bin as phone.tar
cache.image as csc.tar
system.img and all renaming .img as pda tar
then flash the all together via odin with repartition.
Click to expand...
Click to collapse
Ok I wait for your files here i have no formated device
i attached photo for more info if this help
spawk said:
Ok I wait for your files here i have no formated device
i attached photo for more info if this help
Click to expand...
Click to collapse
I never said i would build the files!
i got no time at the moment.
your efs folder has been erased,got a backup?
faria said:
I never said i would build the files!
i got no time at the moment.
your efs folder has been erased,got a backup?
Click to expand...
Click to collapse
I had a backup but I don't find him I scanned the whole pc but I had not
yet put in a corner apart I believe that is was simply removed by mistake
spawk said:
I had a backup but I don't find him I scanned the whole pc but I had not
yet put in a corner apart I believe that is was simply removed by mistake
Click to expand...
Click to collapse
just as it is for me too I'm already all the time to try to get back down
what you are looking for, maybe I can help even further ......
pit file or firmware but not in 1 package separate package ( modem , system ...) ,
http://forum.xda-developers.com/showpost.php?p=37174896&postcount=8 is explained here by faria
spawk said:
pit file or firmware but not in 1 package separate package ( modem , system ...) ,
http://forum.xda-developers.com/showpost.php?p=37174896&postcount=8 is explained here by faria
Click to expand...
Click to collapse
the other option is to flash all the separated images with Heimdall Suite.
for a sequence in which the rom with Heimdall Suite is geflash??
faria said:
the other option is to flash all the separated images with Heimdall Suite.
Click to expand...
Click to collapse
i dont have linux and i dont know how use heimdall but if have tut complet step by step
spawk said:
i dont have linux and i dont know how use heimdall but if have tut complet step by step
Click to expand...
Click to collapse
it can be used in windows, as for the sequence, i don't think it matters .
faria said:
it can be used in windows, as for the sequence, i don't think it matters .
Click to expand...
Click to collapse
I have this message with haimdal
if any one can make this http://forum.xda-developers.com/showpost.php?p=37174896&postcount=8 is so great this can help some user in case like mine with softbricked phone Thank in advance if not i wait until faria have some time now in haimdall i have pop up message with xml not fund i have attached screen shoot and i dont know wher i find this xml also if any one can share PIT + phone + pda thanks in advance
spawk said:
if any one can make this http://forum.xda-developers.com/showpost.php?p=37174896&postcount=8 is so great this can help some user in case like mine with softbricked phone Thank in advance if not i wait until faria have some time now in haimdall i have pop up message with xml not fund i have attached screen shoot and i dont know wher i find this xml also if any one can share PIT + phone + pda thanks in advance
Click to expand...
Click to collapse
i will make tomorrow as soon once i have time, problem is my upload speeds are atrocious .like 6 hours to upload 500mb.
Hello ladies and gents. As you may have been able to tell from the title, I made a huge mistake when playing around with my phone's build.prop file. I had tapped on the ro.build.description file and it pulled up the keyboard. I accidentally input an "r", so I deleted it, then saved and left the prop file, thinking everything was fine and proper. Unfortunately, that was not so. Upon my next reboot, I discovered several problems. The Playstore and gallery crash upon every open, and even worse, my internal memory isn't being recognized. I know the problems must be originating from the build description prop file, since that was the only prop file change that had happened since my last reboot. If anyone could give any tips on how to fix this or mount the external sd as internal, that would be wonderful. I need to be able to screnshot, install apps, and perform other functions that require internal storage. Please help me out ASAP.
Lincsbro said:
Hello ladies and gents. As you may have been able to tell from the title, I made a huge mistake when playing around with my phone's build.prop file. I had tapped on the ro.build.description file and it pulled up the keyboard. I accidentally input an "r", so I deleted it, then saved and left the prop file, thinking everything was fine and proper. Unfortunately, that was not so. Upon my next reboot, I discovered several problems. The Playstore and gallery crash upon every open, and even worse, my internal memory isn't being recognized. I know the problems must be originating from the build description prop file, since that was the only prop file change that had happened since my last reboot. If anyone could give any tips on how to fix this or mount the external sd as internal, that would be wonderful. I need to be able to screnshot, install apps, and perform other functions that require internal storage. Please help me out ASAP.
Click to expand...
Click to collapse
extract the build.prop file from your rom.zip
make a flashable zip & flash it. will work normal again
(ifm u dont know how to make flashable zip, just get any flashable mod,
extract all files, delete all files , only leave the meta-inf folder with its data inside untouched & a folder called "system",
put build.prop into system folder, now mark both folders --> right click --> send to zip, put on sd & flash)
good luck!
bejunk said:
extract the build.prop file from your rom.zip
make a flashable zip & flash it. will work normal again
(ifm u dont know how to make flashable zip, just get any flashable mod,
extract all files, delete all files , only leave the meta-inf folder with its data inside untouched & a folder called "system",
put build.prop into system folder, now mark both folders --> right click --> send to zip, put on sd & flash)
good luck!
Click to expand...
Click to collapse
Alright then. I have 2 questions though. Does the flash mod I use have to be specifically for my phone's model? And what do you mean by marking the folders?
Lincsbro said:
Alright then. I have 2 questions though. Does the flash mod I use have to be specifically for my phone's model? And what do you mean by marking the folders?
Click to expand...
Click to collapse
Hey bro, just tell me ur Rom & i will make a flashable zip for you )
bejunk said:
Hey bro, just tell me ur Rom & i will make a flashable zip for you )
Click to expand...
Click to collapse
I'm really sorry, but I don't know what you mean by my Rom. Generally, I'm pretty knowledgeable about my Android, but I've only been rooted for about a week. If by rom you mean like ClockworkMod or something, I'm just on my stock rom. If you mean something else, I don't know. And which slot in Odin would put this in? I only have experience with .tar and .md5.
Lincsbro said:
I'm really sorry, but I don't know what you mean by my Rom. Generally, I'm pretty knowledgeable about my Android, but I've only been rooted for about a week. If by rom you mean like ClockworkMod or something, I'm just on my stock rom. If you mean something else, I don't know. And which slot in Odin would put this in? I only have experience with .tar and .md5.
Click to expand...
Click to collapse
Check in 'Setting>About> copy everything in here and post it here, so people can help with your problem.
Naimlaaa said:
Check in 'Setting>About> copy everything in here and post it here, so people can help with your problem.
Click to expand...
Click to collapse
Thanks, I should have thought to do that sooner
bejunk said:
Hey bro, just tell me ur Rom & i will make a flashable zip for you )
Click to expand...
Click to collapse
Alright, here's my system info:
Model Number: SAMSUNG-SM-G730A
Android 4.4.2
Baseband: G730AUCUBNG3
Kernel Version: 3.4.0-1670137
[email protected] #1
Thu Jul 24 22:04:06 KST 2014
Build Number (My busybox installer said this was my rom, so it might be what you need): KOT49H.G730AUCUBNG3
Hope this helps you out
Lincsbro said:
I'm really sorry, but I don't know what you mean by my Rom. Generally, I'm pretty knowledgeable about my Android, but I've only been rooted for about a week. If by rom you mean like ClockworkMod or something, I'm just on my stock rom. If you mean something else, I don't know. And which slot in Odin would put this in? I only have experience with .tar and .md5.
Click to expand...
Click to collapse
sorry my llate reply, lets go
he bro u know whats the rom ) you say you are on stock rom, thats all i need.
clockwork mod is no rom, its a recovery.
sorry was a small hazzle for me as you use the AT&T version of the phone, now to the solution:
we need to just replace the damaged build prop with original one.
1. download the system image here: http://www.mrcrab.net/viewstockrom/19845-sm-g730a.html (or anywhere if u find, maybe at SAMMOBILE)
2. (try) to extract the parts of it, we need the system image. if u dont know how just google it, maybe some tools needed for diffrent kind of datas. once all extracted the build.prop is inside system (-folder). copy it to SD & replace via any ROOT explorer, set the right permissions, like in this pic LINK, reboot done.
if you CANT extract that image, make you ready for completly new install of your ROM.
Lincsbro said:
Thanks, I should have thought to do that sooner
Alright, here's my system info:
Model Number: SAMSUNG-SM-G730A
Android 4.4.2
Baseband: G730AUCUBNG3
Kernel Version: 3.4.0-1670137
[email protected] #1
Thu Jul 24 22:04:06 KST 2014
Build Number (My busybox installer said this was my rom, so it might be what you need): KOT49H.G730AUCUBNG3
Hope this helps you out
Click to expand...
Click to collapse
:good:
bejunk said:
sorry my llate reply, lets go
he bro u know whats the rom ) you say you are on stock rom, thats all i need.
clockwork mod is no rom, its a recovery.
sorry was a small hazzle for me as you use the AT&T version of the phone, now to the solution:
we need to just replace the damaged build prop with original one.
1. download the system image here: http://www.mrcrab.net/viewstockrom/19845-sm-g730a.html (or anywhere if u find, maybe at SAMMOBILE)
2. (try) to extract the parts of it, we need the system image. if u dont know how just google it, maybe some tools needed for diffrent kind of datas. once all extracted the build.prop is inside system (-folder). copy it to SD & replace via any ROOT explorer, set the right permissions, like in this pic LINK, reboot done.
if you CANT extract that image, make you ready for completly new install of your ROM.
:good:
Click to expand...
Click to collapse
I can do that, but I have a problem. I can't download the file from the link you provided. Could you find me a different place to download the image from, or maybe even give me a direct download link? Thanks.
Lincsbro said:
I can do that, but I have a problem. I can't download the file from the link you provided. Could you find me a different place to download the image from, or maybe even give me a direct download link? Thanks.
Click to expand...
Click to collapse
You can try Mr Google for that. just kidding, but seriously you can do that.
bejunk said:
sorry my llate reply, lets go ................ set the right permissions, like in this pic LINK, reboot done.:
Click to expand...
Click to collapse
Little help here, did Selinux news to set to permissive to make the permission become permanent? Because sometimes when I change a dir perm it didn't stick, it change back when quit i explorer.
Thanks in advance.
Lincsbro said:
I can do that, but I have a problem. I can't download the file from the link you provided. Could you find me a different place to download the image from, or maybe even give me a direct download link? Thanks.
Click to expand...
Click to collapse
@Naimlaaa is right , google for yor model SAMSUNG-SM-G730A firmware there are plenty sites about samsung, i have limited time at the moment..
Naimlaaa said:
You can try Mr Google for that. just kidding, but seriously you can do that.
:good:
Little help here, did Selinux news to set to permissive to make the permission become permanent? Because sometimes when I change a dir perm it didn't stick, it change back when quit i explorer.
Thanks in advance.
Click to expand...
Click to collapse
1st, whats your rom & phone model, because on my ROM theres no SELinux (enabled) & on my otherhandset it works all fine..
also what kind of perm. ?? system r/w or on files ??
bejunk said:
@Naimlaaa is right , google for yor model SAMSUNG-SM-G730A firmware there are plenty sites about samsung, i have limited time at the moment..
1st, whats your rom & phone model, because on my ROM theres no SELinux (enabled) & on my otherhandset it works all fine..
also what kind of perm. ?? system r/w or on files ??
Click to expand...
Click to collapse
i use slimkat 4.4.4 by android-andi on SGS3 Mini (i8190n).
1. using root explorer, changing perm on the first / (the root dir, i believe).
2. this one is new problem, nothing to do with our recent dialogs, hope can get some idea on this one.
yesterday, i install android tweaker app, and set the auto system/device tweak( can't remember exact) and reboot my device
to apply the setting. and got stuck on boot animation (blinking 'SAMSUNG' anim, after the 'GT I8190N' image on ori ROM). it
didn't loop (no bootloop), just stuck on blinking animation, boot image i guest?
Any idea just throw in please, really want to try and confirm on any solution we got in mind.
thanks in advance everyone.
I'm unable to figure out how to convert the boot.bin file I extracted from the firmware.kdz file. Magic iso won't convert the bin file to img file. So do I just change the extension from .bin to .img? Something tells me it's not that simple.
Btw I'm asking because I'm trying to build a rom. So I'm gonna need this boot.img to be able to boot in my rom. Any help is appreciated.
Or if someone could point me in the right direction for pulling the boot.img from my phone with adb, that would work too. All the guides I found are for different devices with different partition names. And a lot of the commands aren't working for me.
Sent from my LG-H811 using Tapatalk
Mikekelso421 said:
I'm unable to figure out how to convert the boot.bin file I extracted from the firmware.kdz file. Magic iso won't convert the bin file to img file. So do I just change the extension from .bin to .img? Something tells me it's not that simple.
Btw I'm asking because I'm trying to build a rom. So I'm gonna need this boot.img to be able to boot in my rom. Any help is appreciated.
Or if someone could point me in the right direction for pulling the boot.img from my phone with adb, that would work too. All the guides I found are for different devices with different partition names. And a lot of the commands aren't working for me.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
You answered the question urself... Just change the file extension from bin to img.. Ive done that before and it works... U can do a adb pull dev/block/bootdevice/by-name/boot.img
Google~Android said:
You answered the question urself... Just change the file extension from bin to img.. Ive done that before and it works... U can do a adb pull dev/block/bootdevice/by-name/boot.img
Click to expand...
Click to collapse
I'll try it and let you know if I have success. Thanks for your response.
Sent from my LG-H811 using Tapatalk
Did it work, or not? I have the same question.
If you have root you can use app 'Partitions Backup & Restore' by Wanam from app store to pull any partition from your phone.
fofopuka said:
Did it work, or not? I have the same question.
Click to expand...
Click to collapse
it work for me i just fix my Tecno WX3P that stuck at boot
Tech_Savvy said:
You answered the question urself... Just change the file extension from bin to img.. Ive done that before and it works... U can do a adb pull dev/block/bootdevice/by-name/boot.img
Click to expand...
Click to collapse
That's what I needed to know !