Having trouble building cm10 - Nook Color General

I had a working build environment for CM10, but then accidentally deleted the wrong VM. I started over and thought I'd done everything the same as before, but now I keep getting this when I try to build:
Code:
Export includes file: frameworks/av/media/libstagefright/yuv/Android.mk -- /home/darrian/android/system/out/target/product/encore/obj/SHARED_LIBRARIES/libstagefright_yuv_intermediates/export_includes
make: *** No rule to make target `/home/darrian/android/system/out/target/product/encore/obj/SHARED_LIBRARIES/libchromium_net_intermediates/export_includes', needed by `/home/darrian/android/system/out/target/product/encore/obj/SHARED_LIBRARIES/libstagefright_intermediates/import_includes'. Stop.
make: *** Waiting for unfinished jobs....
Export includes file: external/tremolo/Android.mk -- /home/darrian/android/system/out/target/product/encore/obj/SHARED_LIBRARIES/libvorbisidec_intermediates/export_includes
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
Any ideas where my problem lies?

Ok, I solved it myself. Basically I wiped the virtual HDD and started over again. This time, when installing all the dependencies that I may or may not need, I did it completely using the software center and not at all using the terminal. This resulted in not installing some things I had installed before, because the software center could not find them, so I was probably forcing the install of packages that were conflicting or somehow otherwise mucking up the environment. I don't know enough about linux to really have any clue what happened, but it works now, so I'm happy.

Related

[Q] ICS on a similar phone

Please forgive me for posting on your forum but I gave googled my problem with no success and the developers for ICS on the Hero have made progress with compiling ICS so I thought I'd ask my question here.
I have successfully compiled ICS 4.0.3 for the ARMv6 using the TeamICS patches here:
hxxps://github.com/TeamICS/ICS_Fixes
(sorry....can't post outside links yet!)
And other relevant pataches like:
hxxp://r.cyanogenmod.com/#change,10532
My phone is the Samsung Intercept with the S3C6410 processor similar to the processor in the Hero. The Intercept ROMs don't use .img files to flash the /system partition so I compiled ICS with: make -j4 otapackage to get a zip.
My dev box is Ubuntu 10.04 LTS and everything is installed EXACTLY like the AOSP website says it should be here:
hxxp://source.android.com/source/initializing.html
I flash the zip using CM recovery and boot and this error is killing me:
Warning PackageParser Exception reading AndroidManifest.xml in /system/framework/framework-res.apk
Warning PackageParser java.lang.SecurityException: /system/framework/framework-res.apk failed verification of META-INF/CERT.SF
Warning PackageParser Exception reading AndroidManifest.xml in /system/app/PicoTts.apk
Warning PackageParser java.lang.SecurityException: /system/app/PicoTts.apk failed verification of META-INF/CERT.SF
No apk will load because they fail verification. The list of failed APK's is long in logcat. I even went into the Java source code to hack out the verification code with no success. If any Devs have seen this or know why this is happening I would be grateful for a hint. Thanks.
UPDATE: I flashed the Hero ICS zip to my phone(with a few modifications to prevent a phone brick!) to see if the problem was with my compile or something else and I got the same errors. This must mean that there is something about the way Android checks APK signatures that I don't understand.
More information:
If I run jarsigner -verify -certs framework-res.apk I get "jar verified".
I have a theory about certs being bad at runtime:
In logcat there are entries saying that bouncycastle classes can't be preloaded and I'm guessing that bouncycastle has something to do with cryptographic keys so maybe PackageParser can't use the crypto classes and bombs.
jaybob413 would definitely be the guy to ask, or even mattcrystal. see if they have time to pm back and forth, and even post this in a dev/wip/rom thread in the intercept forums. exciting what these old phones can do, and i hope you go far with your port.
whoshotjr2006 said:
jaybob413 would definitely be the guy to ask, or even mattcrystal. see if they have time to pm back and forth, and even post this in a dev/wip/rom thread in the intercept forums. exciting what these old phones can do, and i hope you go far with your port.
Click to expand...
Click to collapse
Thanks for the tip...I have sent a message on github to mattcrystal so maybe he will respond if he has time.
bads3ctor said:
Please forgive me for posting on your forum but I gave googled my problem with no success and the developers for ICS on the Hero have made progress with compiling ICS so I thought I'd ask my question here.
I have successfully compiled ICS 4.0.3 for the ARMv6 using the TeamICS patches here:
hxxps://github.com/TeamICS/ICS_Fixes
(sorry....can't post outside links yet!)
And other relevant pataches like:
hxxp://r.cyanogenmod.com/#change,10532
My phone is the Samsung Intercept with the S3C6410 processor similar to the processor in the Hero. The Intercept ROMs don't use .img files to flash the /system partition so I compiled ICS with: make -j4 otapackage to get a zip.
My dev box is Ubuntu 10.04 LTS and everything is installed EXACTLY like the AOSP website says it should be here:
hxxp://source.android.com/source/initializing.html
I flash the zip using CM recovery and boot and this error is killing me:
Warning PackageParser Exception reading AndroidManifest.xml in /system/framework/framework-res.apk
Warning PackageParser java.lang.SecurityException: /system/framework/framework-res.apk failed verification of META-INF/CERT.SF
Warning PackageParser Exception reading AndroidManifest.xml in /system/app/PicoTts.apk
Warning PackageParser java.lang.SecurityException: /system/app/PicoTts.apk failed verification of META-INF/CERT.SF
No apk will load because they fail verification. The list of failed APK's is long in logcat. I even went into the Java source code to hack out the verification code with no success. If any Devs have seen this or know why this is happening I would be grateful for a hint. Thanks.
UPDATE: I flashed the Hero ICS zip to my phone(with a few modifications to prevent a phone brick!) to see if the problem was with my compile or something else and I got the same errors. This must mean that there is something about the way Android checks APK signatures that I don't understand.
More information:
If I run jarsigner -verify -certs framework-res.apk I get "jar verified".
I have a theory about certs being bad at runtime:
In logcat there are entries saying that bouncycastle classes can't be preloaded and I'm guessing that bouncycastle has something to do with cryptographic keys so maybe PackageParser can't use the crypto classes and bombs.
Click to expand...
Click to collapse
Sorry sir. I personally do not have enough time to look at your problem. I'm pretty busy with Zero Hero at the moment and ICS development is always on going.
When compiling from source the very last thing the complier does is run Google's signapk before finishing the zip. One reason I never got it to work was I was running 32 bit Ubuntu. Jaybob noticed I needed to be running 64 bit to properly compile and after that I'm able to flash my own builds from source. My guess is this is where you might be failing. ICS is a much bigger than gingerbread and tons of changes that are hard to overcome.
Sent from my HTC Zero Hero Sense 3.5
MattCrystal said:
Sorry sir. I personally do not have enough time to look at your problem. I'm pretty busy with Zero Hero at the moment and ICS development is always on going.
When compiling from source the very last thing the complier does is run Google's signapk before finishing the zip. One reason I never got it to work was I was running 32 bit Ubuntu. Jaybob noticed I needed to be running 64 bit to properly compile and after that I'm able to flash my own builds from source. My guess is this is where you might be failing. ICS is a much bigger than gingerbread and tons of changes that are hard to overcome.
Sent from my HTC Zero Hero Sense 3.5
Click to expand...
Click to collapse
Thanks for posting. ICS on the Samsung Intercept is up and running.
Do me a favor and click thanks perhaps and your welcome
Sent from my HTX Zero Hero Sense 3.5
no wip/dev thread on the intercept forums yet? that would be awesome, i a know a few with intercepts that would love to see ics on their phones. op you should think about making it happen, at least posting a guide/howto.

[GUIDE]Development for GalaxyTab 7.7 and Plus. How hard could it be?

Planning this for sometimes. So much work ahead. Just studying the new code cause me a lot of time. I think I have to rush it out so that someone may share my burden. Don't have much time to polish it. I'm trying to provide all commands, files and links. Please correct me if something is wrong or missing. Hoping this could be a stepping stone for those interested. If you like challenge, it'll be fun!
1. Introduction
If you have watched "Top Gear", you would have heard Jeremy Clarkson said "How hard could it be?". Why is it so hard to build a rom for our tab?
When I first play with rom building, it was quite straightforward. I recuilt my retired PC (Celeron 1.2G with 3G RAM, 40G HD) and follow the guild for building PA. Installing Ubuntu 12.04 and then the necessary packages. Everything is ready in a few hours. It was really challenging your patience to repo sync the source. After a few retries, I finally completed the download in two days! After two hours, my harddisk is full! Then I collected another retired 80G HD from a friend. Re-install everything and build again. Building requried 7 hours on my antique PC. With only a few minor errors to correct, my first rom pa2.55 was out. So how hard could it be? It was our predecessors ( @ohanar, @locerra, etc.) :good: who had already done lots of hardwork on device trees and kernel! If Samsung has really released the hardware related sources, there will not be so much troubles for us. At the time Android 4.2 launch, we have a new problem. Our tab's CSR chip doesn't support Bluedroid. See the Nexus family, everything is ready. Rom building will never be so pain in the ass as us.
1.1 What's wrong with our hardware
GT-7.7 and Plus use the exynos4 smdk4210 board with Mali-400 GPU. Quite a number of devices have similar hardware. The main problem we have would be:
1.1.1 CSR bluetooth chip.
CSR chip doesn't support bluedroid which become standard after Android 4.2. Bluez.org has provide a solution for 4.2 early this year but porting to 4.3 and 4.4 may take some time.Working on it now. Anyone has experience on bluetooth are welcome to help.. Bluez working now. See my Thread How to port Bluez to Android 4.4. Cheers!:highfive:
1.1.2 Athero wifi chip.
Samusng's wifi driver has issues on 5G support and SOD. I'm using the modified kernel driver from Samsung's 4.1.2 source. Athero provide drivers for 3.1 to 3.10 linux kernels but they have no wakelock support. I also wrote a drive base on Athero's source and add wakelock support but have no time to polish it now. Athero's chip doesn't have firmware for AP as Boardcom. Which is also the way Android platform providing wifi tethering in framework. To support wifi tethering we have to change the framework and the driver. Anyone has experience in linux HostAP are welcome to help. Wifi tethering is ok now! Tutorial will be in Post#2 soon.
1.1.3 modem chip (xm6260).
RIL stand for (radio interface library). Most of the phone manufacturer would provide their own vendor lib. The only working blob now is Samsung's ICS propietry libsec-ril.so which is obselete now. The one from stock 4.1.2 not working but no time to trace. It also don't seems to have much difference. This library handle the AT commands issuing to the (baseband to) modem chip. xm6260 has a complete set of command manual. It should not be too hard to rewrite if we can hack the ports. However it is not worth to splend too much time on this. Those has experience in AT commands are welcome to help.
RIL details: http://www.kandroid.org/online-pdk/guide/telephony.html
1.2 Where to get the source?
1.2.1 Samsung's source for our tab
The best source would be from Samsung http://opensource.samsung.com/. Sadly, the source from Samsung only cover the kernel. Our tab only have source up to 4.1.2 and kernel source 3.0.31 from Samsung.
1.2.2 Samsung's source for other devices
Luckly, we have similar architecture to some newer Samsung models. Their source is our major source now. eg. We can use the Mali driver from Note8 and/or i9300.
1.2.3 Manufacturere's web site.
The other source would be from the chip manufacturer. eg. Athero has source for linux.
1.3 What is going on at boot?
1.3.1 Power ON
a) When power button is long pressed (should be released after the logo shows otherwise it will reboot again every 6 seconds). The manufacturer's bootloader would show the vendor's logo. At that moment, bootloader would sense if there are key being pressed. Standard Android will go to boot menu when pwr + vol- is pressed. Samsung would go to download mode (something like fastboot) and accept pwr + vol+ to start recovery mode. If no other key is pressed, it would be a normal boot.
b) When USB is plug in (PC usb port or charger) at power off, the tab will be turn on silently. It is in the LPM (low power mode). According to lpm.rc (executed by Init, will be explained in 1.3.3), CPU will be set to POWERSAVING and the program charger is running. It should only handle simple tasks like Detecting the pwr button to show the charging images. If the pwr is long press when showing the charging image, it will reboot as in a).
3) Lollipop LPM: charger is link to the program /sbin/healthd. The process is similar to b) but lpm.rc is merged to init.rc.
1.3.2 Boot image
For our tab, there are two parts for a boot.img or a recovery.img. kernel binary and initramfs. As the name imply, Init-Ram-FS is the initial file system loaded into ram when the devices boot. Kernel binary provide the hardware drivers libraies which communicate with the hardware and baseband. At normal boot or recovery mode, the image (in /boot or /recovery partition) will be decompressed and loaded to memory. Initramfs will be loaded in root(/). It would consume a few hundreds MB of RAM and that's why our free ram is only 7xxM.
In LPM, it would depends on the last boot state. If it was powered off from recovery, recovery.img will be loaded and handle the LPM. If it was powered off from platform, boot.img will be loaded and handle LPM. That's why It might show different charging images if the charging images for reovery.img and boot.img are different.
Stock cook roms can unpack and modified the initramfs from the existing zImage. It is created in system/core if we build it from source. Here is a tool which can unpack/repack our boot.img or recovery.img.
1.3.3 Init
There is the Init program in every initramfs. This is the first program to run according to the sequence in the init.rc (or lpm.rc when in LPM). Partitions will be mounted and symlinked, default values and permissions are assigned, services will be started, etc. The source of Init is in system/core. The last thing Init do would be the continuous eventloop to process events.
2. Getting Start
To start building, we need the building environment. Many tutorials have alreay covered the details so I just list my suggestions. The guide from Google is a bit outdated but really helpful. http://source.android.com/source/building.html
Basic knowledge of linux is required. All commands are run in a terminal.
2.1 Hardware
A decent PC with as much ram as possible. Thanks for the donations, I can upgrade to a better i5 notebook with 4G ram and a 500G partition only for building. It would take 3+hrs. for a clean build. RAM and Harddisk speed are essential. A desktop PC with same configuration will be faster since notebook harddisk is slower. I plan to add more RAM when the price drop (seems to be a long wait )
RAM: 4G or above is recommended.
Harddisk space: 30G+ for system, 60G+ per rom, size of ccache (50G-100G), Roughly, a partition with at least 120G for one rom. Bigger is better.
A decent internet connection is essential. It will take days to sync the source if you only have bandwidth of 2M or less .
2.2 OS
64bit Ubuntu Desktop 12.04 or above. Recommend 13.04 or above. I'm using the latest 14.04.
2.3 Install the required packages
These packages are required during building and packing. (eg. gzip is required to compress the kernel binary)
type command: (have a beer or coffee. It will take a while)
Code:
[I][COLOR="Green"]For Ubuntu 12.x and 13.x:[/COLOR][/I]
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev zlib1g-dev:i386 \
libc6-dev lib32ncurses5-dev ia32-libs x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 lib32z-dev \
libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown libxml2-utils xsltproc \
readline-common libreadline6-dev libreadline6 bzip2 libbz2-dev libbz2-1.0 libncurses5-dev lib32readline5 \
lib32readline-gplv2-dev lib32readline6 libreadline-dev libreadline6-dev:i386 libreadline6:i386 pngcrush \
libghc-bzlib-dev lib32bz2-dev libsdl1.2-dev libesd0-dev squashfs-tools schedtool libwxgtk2.8-dev python
sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
[I][COLOR="Green"]For Ubuntu 14.x and 15.x:[/COLOR][/I]
sudo apt-get install git-core gnupg flex bison gperf libsdl1.2-dev libesd0-dev libwxgtk2.8-dev squashfs-tools \
build-essential zip curl libncurses5-dev zlib1g-dev pngcrush schedtool libxml2 libxml2-utils xsltproc lzop \
libc6-dev schedtool g++-multilib lib32z1-dev lib32ncurses5-dev lib32readline-gplv2-dev gcc-multilib
2.4 Insatll android-sdk
Download (for Linux 64-bit of course): http://developer.android.com/sdk/index.html
Extract the file to a directory (eg. ~/android-sdk)
Add the path to ~/.bashrc
type command:
Code:
sudo gedit ~/.bashrc
at the bottom add the path
Code:
export PATH=~/bin:~/android-sdk/tools:~/android-sdk/platform-tools:$PATH
Quit and restart terminal to commit the changes.
Verify the path and update the SDK
type command:
Code:
android
2.5 Install java
If you have installed eclipse, openJAVA is ready. Some say it is not suitable for android development.
I've tried both and I found no appearing difference.
To install SUN JAVA (Ubuntu 13.04 or above)
type command:
Code:
sudo add-apt-repository ppa:webupd8team/java
sudo apt-get update
sudo apt-get install oracle-java6-installer
For Lollipop: openjdk 7 is required
Code:
sudo apt-get install openjdk-7-jdk
2.6 Install repo
type command:
Code:
mkdir -p ~/bin
curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
2.7 Add usb dev rules
Which are required for adb and fastboot, eg. View attachment 51-android.zip
type command:
Code:
sudo cp 51-android.rules /etc/udev/rules.d
sudo chmod 0644 /etc/udev/rules.d/51-android.rules
2.8 Enable ccache
type command:
Code:
sudo gedit ~/.bashrc
add lines for CCACHE
Code:
export USE_CCACHE=1
export CCACHE_DIR=~/android/.ccache
Quit and launch the terminal again to commit the changes
ccache will cache the object files of gcc for next build, it would increase the speed of subsequent builds alot.
After source is sync in 2.11 and before build, we can set the size of ccache first.
type command:
Code:
~/android/rom/prebuilts/misc/linux-x86/ccache -M<size>
2.9 Init the source
Make a new working driectory for your rom
type command: (eg. ~/android/rom)
Code:
mkdir -p ~/android/rom
Each rom has its own manifest.xml listing all the required projects.
It is usually in the project android (manifest for PA). The readme of this project would provide the command to init.
eg. CM11.0: https://github.com/CyanogenMod/android/tree/cm-11.0
type command:
Code:
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
It will fetch the manifest.xml and put it into a hidden directory .repo in the current directory (~/android/rom/.repo)
2.10 preparing local_manifest.xml
It is not a good pratice to change the manifest.xml directly. If the ROM has change its manifest, you would require to init again. The right way is putting everything your device needed in a seperate file .repo/local_manifests/local_manifest.xml. The device trees and kernel source for GalaxyTab 7.7 and Plus : https://github.com/danielhk?tab=repositories
eg. cm11.0 for p6800
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="danielhk/android_hardware_atheros_wlan" path="hardware/atheros/wlan" />
<project name="danielhk/android_device_samsung_p6800" path="device/samsung/p6800" />
<project name="danielhk/android_device_samsung_smdk4210-tab" path="device/samsung/smdk4210-tab" />
<project name="danielhk/android_kernel_samsung_smdk4210" path="kernel/samsung/smdk4210" />
<project name="danielhk/proprietary_vendor_samsung_smdk4210" path="vendor/samsung" />
<project name="CyanogenMod/android_hardware_samsung" path="hardware/samsung" />
</manifest>
Note: Settings will follow manifest.xml. cm-11.0's manifest has default remote="github" and revision="refs/heads/cm-11.0" so we can omit the same entries here. For other roms, see the defined names in manifest.xml and change accordingly. You can also add other devices trees here if you want to build them for the same rom.
2.11 sync and build
To fetch the source (specified in manifest.xml and local_manifest.xml) to working directory (~/android/rom)
type command:
Code:
repo sync -j32
-J specify the no. of threads to download. I have a few trials. Seems 32 works for me.
When it is done. You will find that ~/android/rom is not empty now.
You may set the ccache size now:
type command: (eg. 50G)
Code:
~/android/rom/prebuilts/misc/linux-x86/ccache -M50G
Only if you want to change size, otherwise it only requires once.
To build a rom, change to the rom directory. Usual commands: (eg. for CM roms)
Code:
cd ~/android/rom
. build/envsetup.sh
lunch cm_p6800-userdebug
mka bacon
CM need to download a prebuilt (Termianl.apk). To simplify this routines, I modified the build script from PA to cm View attachment rom-build.zip.
Copy it to the rom directory, type command:
Code:
cd ~/android/rom
./rom-build.sh p6800
After building is complete with no error, the rom will be output to ~/android/rom/out/target/product/p6800.
3. What can we do? :laugh:
3.1 Kernel
Since Samsung provide the complete kernel source, working on kernel would be comparatively speaking much easier.
When we say kernel, we mean the boot.img or zImage which already include the initramfs. This image will be flash to the /kernel (/dev/block/mmcblk0p5)
Hardware and flags are defined in defconfig inside <kernel dir>/arch/arm/config. It is the Linux standard.
3.1.1 difference between stock kernel and the kernel in custom rom
The main difference between the two kernels is the location of kernel library modules. Libray modules are mainly for network and storage drivers. By building them as modules, they can be stoped and restarted in case of critical errors.
Stock kernel put it in /lib which is part of the initramfs. We need to do extra steps to manually copy them to the initramfs after the first build and rebuild again. If you want to build the stock kernel, there is a very good tutorial.
Custom rom put the kernel library modules in /system/lib. Thus boot.img need to match those modules, otherwise they will not work properly.
For custom roms, which defconfig to be used is defined in device tree.
eg. For p6800, in the file device/samsung/p6800/BoardConfig.mk. There is the line:
Code:
TARGET_KERNEL_CONFIG := cyanogenmod_p6800_defconfig
It specify which defconfig file for the kernel
I wrote a View attachment build-k.zip scirpt to simplify the building of kernel alone. Copy it to the rom working directory (~/android/rom)
eg. For p6800, type command:
Code:
./build-k p6800
New boot.img will be output to the same directory as rom if no error.
3.1.2 Add/modify O/C, U/V, GOVERNORS, hardware drivers, etc.
As mentioned in 1.2, we can copy/modified the source from i9100 and n7000 kernels. For example, Dorimanx and Slyahkernel provide many useful code for us. The source of i9300 from Samsung may also provide some drivers update (eg. Mali)
Ref: Exynos4210 cpu menu., Mirror download
3.1.3 Default Orientation
Why the incall screen always landscape?
Many apks assume the default orientation is portrait but our tab's default orientation is landscape. It is a kernel behaviour so that recoveries (including the stock 3e recovery) are all in landscape.
To avoid this odd behaviour of apks like inCall screen, changing the default orientation in kernel is the ultimate solution.
It is already in my do list for a long time but trying to keep up with the android plaftform already occupy all my spare time...
I already have some idea how to do. Anyone interested to help on this can PM me. Already fixed in the platform
3.1.4 Update the kernel source
The existing kernel is base on Linux 3.0.x. It is outdated but I don't think Samsung would bother to update it. I had tried starting with the 3.4 source from Google but don't have enough time to carry on. I have filled some drivers already. Will take another shot later if I have time...
Anyone have experience in Linux kernel are welcome to help. No more guides are there, this would be a great challenge but fun!
3.2 device tree
Every device requires a device tree which:
a) Specify the hardware
b) define some overrided library. (eg. sensor, camera)
c) provide the extra files to be put in the initramfs. (init.<device>.rc, fstab.<device>, etc.)
If there are a few models variants, common parts would be put in a seperate common device tree (eg. smdk4210-tab for our tab). In this way, changing can be made once for all variants.
Most of the work on porting for a specific ROM would be on the device tree. Same as the kernel, we can get some update by modifying from other devices. CM's device tree for i9100, n7000 and i9300, etc. With a good device tree, we can port to any ROM.
3.3 Bluetooth support after 4.2.
In 4.2.2, I changed the source of framework, system_core, phone apk and device tree to work with bluez. It was a huge job! Hundreds of lines had been changed. Many files are replaced. It was quite clumsy but was the only way then. This way may not work for 4.3 onward.
Here are the details of both stack:
Bluedriod : http://source.android.com/devices/bluetooth.html
Bluez : http://www.kandroid.org/online-pdk/guide/bluetooth.html
3.3.1 We may modify the bluedroid to support our chip.
3.3.2 Working on the bluez support. I'm trying now.
  Bluez5 is OK now. See my thread: How to port Bluez to Android 4.4
3.4 Recoveries
With the device tree and kernel, we can build the recovery from source. CWM would be a side product of CM roms and TWRP has a tutorial.
The same View attachment build-k.zip script can be used to build recovery alone. In the rom working direcotry, to build recovery only
type command:
Code:
./build-k p6800 recovery
With no error, recovery.img will be at the same output directory as rom.
Local manifest
https://github.com/danielhk/local_manifest
All model share the same local_manifest.xml
daniel_hk, Check and commit to your tree my patches for PAC-4.2.2
Vaka2 said:
daniel_hk, Check and commit to your tree my patches for PAC-4.2.2
Click to expand...
Click to collapse
Thanks!
It nice to see someone interested in our development!
I have look into your changes briefly.
1. Some changes in media which I'll leave the user to decide. I rather keep the builds as genuie as possible.
2. Some of them are new commit of the original source which will automatically updated in a sync.
3. I forgot to upload a few minor projects to github.
One of which was android_build which will include the files like hciattach building from source. If you study the source of exteranl/bluetooth/bluez, they are there. That means it might have update later. No need to add as a blob.
Actually the best way is including them in PROJECT_PACKAGES section of the device.mk. It would have the same result without touching the original source. Less touch to the original source means fewer conflict later. I was caught up and did't have time to tidy up everything so I leave it there. Also, files from bluetooth should be put in the smdk4210-tab device tree. All model share the same source.
vendor_pac should be upload to official PAC's git. They already gave me an account but they use Google+ which I have trouble to login here. I was working on a job and I hadn't follow up. Now I'm working on 4.4 which PAC haven't release yet. So I put aside first.
You probably didn't have to waste you time if you PM me first.
Everytime I upload to github is a challenge, it always break before complete. I have to monitor it from time to time. Annoying! So I can only upload once a while when everything is ready...
To be honest, I really don't have time to keep up with the old source. The new ports already occupy all my spare times. With limited resource, I can only focus on major issues. Bluetooth after 4.3 is my first priorty. If it can be done, means we can go much further.
If you are interested, you may pick one of the thing I mentioned in this thread to start. Wifi-tethering or the vendor ril library is needed too. You may try it in 4.2.2 first. See what you are good at and interested to. PM me or post again if you have any questions and/or suggestion.
Thanks again for your effort.
daniel_hk said:
Thanks!
It nice to see someone interested in our development!
I have look into your changes briefly.
1. Some changes in media which I'll leave the user to decide. I rather keep the builds as genuie as possible.
2. Some of them are new commit of the original source which will automatically updated in a sync.
3. I forgot to upload a few minor projects to github.
One of which was android_build which will include the files like hciattach building from source. If you study the source of exteranl/bluetooth/bluez, they are there. That means it might have update later. No need to add as a blob.
Actually the best way is including them in PROJECT_PACKAGES section of the device.mk. It would have the same result without touching the original source. Less touch to the original source means fewer conflict later. I was caught up and did't have time to tidy up everything so I leave it there. Also, files from bluetooth should be put in the smdk4210-tab device tree. All model share the same source.
vendor_pac should be upload to official PAC's git. They already gave me an account but they use Google+ which I have trouble to login here. I was working on a job and I hadn't follow up. Now I'm working on 4.4 which PAC haven't release yet. So I put aside first.
You probably didn't have to waste you time if you PM me first.
Everytime I upload to github is a challenge, it always break before complete. I have to monitor it from time to time. Annoying! So I can only upload once a while when everything is ready...
To be honest, I really don't have time to keep up with the old source. The new ports already occupy all my spare times. With limited resource, I can only focus on major issues. Bluetooth after 4.3 is my first priorty. If it can be done, means we can go much further.
If you are interested, you may pick one of the thing I mentioned in this thread to start. Wifi-tethering or the vendor ril library is needed too. You may try it in 4.2.2 first. See what you are good at and interested to. PM me or post again if you have any questions and/or suggestion.
Thanks again for your effort.
Click to expand...
Click to collapse
Thanks to you Daniel for your immense effort on detailing all this! I'm far from a dev status like you and @UpInTheAir. But my support will always go to you developers. Both of you has done an impressive work for an outdated hardware and keep us happy with your Rom and Kernel. Again, thanks a lot.
Thanks, all hail daniel_hk for this!
Daniel,
I can only thank you for all the work he is having to keep our equipment (62xx, 68xx, TXX) alive and really Kitkat will give a new breath, for even in an experimental state already see how the device works smoother. A feather can not help, but I'm looking forward to seeing this in functional status.
As a suggestion, I honestly do not know the procedures, but it would be interesting to ask an official support OmniROM (ROM promising, others liked) and CM. The Galaxy SII has the same hardware, in which the use OmniROM and this magnifies the ROM. Maybe they (Team OmniROM) may offer official support or at least help in these matters!
I'm almost begging for support OmniROM, and Entropy512 (http://forum.xda-developers.com/member.php?u=591147&nocache=1&z=3487892739940434) Kindly reply me: "Someone who is working with one of Those devices and has it working needs to submit it. "
Sorry for my english
Hi Daniel,
Whe I try to repo sync, I was stopped by the error:
"fatal: Couldn't find remote ref refs/heads/cm-10.2"
"Cannot fetch danielhk/proprietary_vendor_samsung_smdk4210."
I was trying to build a cm-10.2 version.
I checked your repository and the folder was right there.
I am new to building android rom. There must be something obvious that I missed.
Thanks.
11nn93n9 said:
Hi Daniel,
Whe I try to repo sync, I was stopped by the error:
"fatal: Couldn't find remote ref refs/heads/cm-10.2"
"Cannot fetch danielhk/proprietary_vendor_samsung_smdk4210."
I was trying to build a cm-10.2 version.
I checked your repository and the folder was right there.
I am new to building android rom. There must be something obvious that I missed.
Thanks.
Click to expand...
Click to collapse
I think you get this line from my PAC manifest.
That was base on cm-10.1, default is cm-10.1. If you take a look of the project danielhk/proprietary_vendor_samsung_smdk4210 on github, you will find only one tree cm-10.1. cm-10.2 can use the same tree. I'll find time to update it later.
When you build cm-10.2, default tree is cm-10.2. The line without a revision will assume the default. That's why you can find it.
Your solution: Add the revision=cm-10.1 at the end of the project.
Code:
.... danielhk/proprietary_vendor_samsung_smdk4210" revision="cm-10.1" />
Good luck!
daniel_hk said:
I think you get this line from my PAC manifest.
That was base on cm-10.1, default is cm-10.1. If you take a look of the project danielhk/proprietary_vendor_samsung_smdk4210 on github, you will find only one tree cm-10.1. cm-10.2 can use the same tree. I'll find time to update it later.
When you build cm-10.2, default tree is cm-10.2. The line without a revision will assume the default. That's why you can find it.
Your solution: Add the revision=cm-10.1 at the end of the project.
Code:
.... danielhk/proprietary_vendor_samsung_smdk4210" revision="cm-10.1" />
Good luck!
Click to expand...
Click to collapse
Thank you for your help. Working on it. Its a big learning curve for me.
I made up to now the most progress with Ubuntu 13.04 64bit version building the cm 10.1 version.
With Ubuntu 12.04 and 13.10, I have been stopped much earlier than on 13.04.
Now I encountered the error below when running build-k p6800:
target thumb C++: libstagefright <= frameworks/av/media/libstagefright/ACodec.cpp
frameworks/av/media/libstagefright/ACodec.cpp:53:24: fatal error: sec_format.h: No such file or directory
compilation terminated.
make: *** [/home/lgeng/android/rom/out/target/product/p6800/obj/SHARED_LIBRARIES/libstagefright_intermediates/ACodec.o] Error 1
make: *** Waiting for unfinished jobs....
I downloaded the folder that contains the sec_format.h file from https://android.googlesource.com/device/samsung/crespo/. But It is not clear to me where to place the folder.
Thanks.
11nn93n9 said:
I made up to now the most progress with Ubuntu 13.04 64bit version building the cm 10.1 version.
With Ubuntu 12.04 and 13.10, I have been stopped much earlier than on 13.04.
Now I encountered the error below when running build-k p6800:
target thumb C++: libstagefright <= frameworks/av/media/libstagefright/ACodec.cpp
frameworks/av/media/libstagefright/ACodec.cpp:53:24: fatal error: sec_format.h: No such file or directory
compilation terminated.
make: *** [/home/lgeng/android/rom/out/target/product/p6800/obj/SHARED_LIBRARIES/libstagefright_intermediates/ACodec.o] Error 1
make: *** Waiting for unfinished jobs....
I downloaded the folder that contains the sec_format.h file from https://android.googlesource.com/device/samsung/crespo/. But It is not clear to me where to place the folder.
Thanks.
Click to expand...
Click to collapse
Not much I can tell. You have to provide the manifest.xml and local_manifest.xml if exist. And device tree changes if exist.
1. build-k is for kernel building only. frameworks_av seems not relevant.
2. crespo is another device. Not the right way to get missing file there.
3. With proper settings and manifest, Ubuntu 12.04 to 13.10 (which I'm using) have no apparent different for building.
If you are building cm-10.1, it is mature. No way there is missing file.
With no other info., I guest there is something wrong with your manifest or device tree. Mixing version projects, wrong flags in device tree, etc.
You might need more reading on what is device tree and manifest first.
Good luck!
Hi,
can you help me with integrating device to manifest.xml? I think there's the problem because everything runs fine until I write luch cm_p6200-userdebug, becuase it shows me that the device isn't found and in /android/rom/device, there isn't any folder called /samsung/p6200. I did everything by the guide, I only changed the local_manifest device info to p6200, because I own it. I'm using Ubuntu 14.04. Thanks for your help.
tom411 said:
Hi,
can you help me with integrating device to manifest.xml? I think there's the problem because everything runs fine until I write luch cm_p6200-userdebug, becuase it shows me that the device isn't found and in /android/rom/device, there isn't any folder called /samsung/p6200. I did everything by the guide, I only changed the local_manifest device info to p6200, because I own it. I'm using Ubuntu 14.04. Thanks for your help.
Click to expand...
Click to collapse
Not much details. next time provide detail. At least, send me your local_manifest.xml. It is definitely the source of your problem. You haven't tell which cm you built too.
I don't know what's wrong because I can't see anything in your side.
But I can tell you that device tree of p6200 didn't download. Check the typings of your local_manifest.xml. It should match the one in github.
Good luck!
TO ANYONE, YOU HAVE TO PROVIDE DETAILS. OTHERWISE, I DON'T KNOW HOW TO HELP!
I really don't have time to guess. You have to forgive me if I ignor your post.
From Nexus 7 上的 Tapatalk
Okay, sorry for it, I didn't know you need it. I want to build a Cm-11. I looked at my local_manifest and I think it's correct. Here is it
edify question for our 815's
Taken from one of your script's
mount("ext4", "EMMC", "/dev/block/mmcblk0p9", "/system");
Installing a .txt into sdcard0/data through .zip in recovery.
I used linux command to find paths for each of the memblocks - but didnt know which path, partition, I am looking for here. /system /userdata etc UHHHH
so to mount to the "sdcard0 /data"directory to install a plain .txt file would be ???
mount("ext4", "EMMC", "??????????????", "/data");
also can I call "/data" anything - like "/datadog" - since this is just a reference to a mount point and is temporary?
One other quicky
First I found this in an edify tutorial -
"/system partition is automatically mounted. this command is needed when you need to mount another partition beside /system or in any condition when recovery mode failed to mount your system partition. the system's location is /dev/stl9, cache /dev/stl10, and data /dev/stl11 (all partition type commonly rfs, will be differ if you have custom kernel or rom)."
since this is a custom rom does /system still auto mount - meaning in ref to to your code above - was it unnecessary but probably good practice or because this is a custom rom there are changes that move the location for /system. I noticed that " the system's location is /dev/stl9, cache /dev/stl10, and data /dev/stl11" was not in the memblock paths??
Start my intro to kernels tomorrow - Oh boy
Off subject - I knew Brazil - tough break with the injury though. Next wins - Argentina and Costa(CoastBaby)!! Going to bed now 6:00 AM WHAT.
Lt.col.johncross said:
Taken from one of your script's
mount("ext4", "EMMC", "/dev/block/mmcblk0p9", "/system");
Installing a .txt into sdcard0/data through .zip in recovery.
I used linux command to find paths for each of the memblocks - but didnt know which path, partition, I am looking for here. /system /userdata etc UHHHH
so to mount to the "sdcard0 /data"directory to install a plain .txt file would be ???
mount("ext4", "EMMC", "??????????????", "/data");
also can I call "/data" anything - like "/datadog" - since this is just a reference to a mount point and is temporary?
One other quicky
First I found this in an edify tutorial -
"/system partition is automatically mounted. this command is needed when you need to mount another partition beside /system or in any condition when recovery mode failed to mount your system partition. the system's location is /dev/stl9, cache /dev/stl10, and data /dev/stl11 (all partition type commonly rfs, will be differ if you have custom kernel or rom)."
since this is a custom rom does /system still auto mount - meaning in ref to to your code above - was it unnecessary but probably good practice or because this is a custom rom there are changes that move the location for /system. I noticed that " the system's location is /dev/stl9, cache /dev/stl10, and data /dev/stl11" was not in the memblock paths??
Start my intro to kernels tomorrow - Oh boy
Off subject - I knew Brazil - tough break with the injury though. Next wins - Argentina and Costa(CoastBaby)!! Going to bed now 6:00 AM WHAT.
Click to expand...
Click to collapse
I don't know what's your objective.
Some points to note:
1. command in updater-script use the function defined in updater-binary. Which are not necessarily a Linux executable command. These commands only valid in the updater-script.
2. You can only mount to an existing directory (mount point) which has not been mounted before. The mount command in Linux is a shell command which is executed by /bin/bash.
3. /system is mount by init following the sequence in .rc files. In recovery, a program is running to provide the interface for I/O. It doesn't require /system partition.
4. No matter which rom (stock or custom), the content of /dev are defined in kernel. Partitions info. is read from the PIT (partition info. table). Kernel will initialize the device at boot accordingly. They are similar to a harddisk partition.
5. our tab has emulated int. sdcard. It is part of the /data, at /data/media.
Hope these might help
earlier question simplified
My problem is with the mount command in a zip file to be used on our Carbon ROM partitions.
My goal is to make 4 different .zip files that can be installed with the recovery software. Each zip places one (the same) simple.txt file into a different folder then the previous zip did.
After I install the 4 zips I should be able to use my file manager app to view the simple.txt in each of the following folders
/sdcard0/data so the ????????? in => mount("ext4", "EMMC", "????????????", "/NAMEOFMOUNT"); would be ==>
/sdcard0/Download so the ????????? in => mount("ext4", "EMMC", "????????????", "/NAMEOFMOUNT"); would be ==>
/Root/data so the ????????? in => mount("ext4", "EMMC", "????????????", "/NAMEOFMOUNT"); would be ==>
/Root/system so the ????????? in => mount("ext4", "EMMC", "????????????", "/NAMEOFMOUNT"); would be ==>
This should give me what i need to fill in what I am missing on understanding this.
Thanks - I hope that this understandable
Off subject - Argentina taken care of biz - Costa is dead to me - Next winners Argentina and Germany
Just about there
6GB with intel I5 -1TB- is now setup as a dual boot with Windows 8.1 and Ubuntu 14.4. All the packages are installed etc.
My linux flavor is ARCH or Manjaro (arch based) - Not a big fan of unity, but since I did not want any pitfalls for support reasons I will use Ubuntu for now.
I now have a descent grasp on GIT and repo, as well as installing cyanogen on one supported device. It would appear that to install on our device any of the custom roms I would just need to provide a local manifest with the proper projects.
I am a little fuzzy on a few things but I think if you could please post two (i815's) local manifest's for two of our newer kitkat roms say Omni & Slim I should be able to figure out my answers or at least narrow down my misunderstandings to exact questions.
Thanks
All Hail GERMANY - - that final game was a real snooze fest.
daniel_hk said:
I don't know what's your objective.
Some points to note:
1. command in updater-script use the function defined in updater-binary. Which are not necessarily a Linux executable command. These commands only valid in the updater-script.
2. You can only mount to an existing directory (mount point) which has not been mounted before. The mount command in Linux is a shell command which is executed by /bin/bash.
3. /system is mount by init following the sequence in .rc files. In recovery, a program is running to provide the interface for I/O. It doesn't require /system partition.
4. No matter which rom (stock or custom), the content of /dev are defined in kernel. Partitions info. is read from the PIT (partition info. table). Kernel will initialize the device at boot accordingly. They are similar to a harddisk partition.
5. our tab has emulated int. sdcard. It is part of the /data, at /data/media.
Hope these might help
Click to expand...
Click to collapse
I'm going to see my mom for 2 days. I'll see if anything missing when return.

[Q] AOSP compiling (DEVELOPERS!!!)

Hi guys, and going to try to compile Android Open Source Project to our device but im getting an error which im not sure how to solve it.
I've installed all the requirements (including the "leaked" sources of the STE8500) and when I try to compile I get this:
Code:
[email protected]:/home/xfi/AOSP# source build/envsetup.sh
including device/samsung/manta/vendorsetup.sh
including device/lge/hammerhead/vendorsetup.sh
including device/lge/mako/vendorsetup.sh
including device/asus/flo/vendorsetup.sh
including device/asus/tilapia/vendorsetup.sh
including device/asus/grouper/vendorsetup.sh
including device/asus/deb/vendorsetup.sh
including device/generic/mips/vendorsetup.sh
including device/generic/x86/vendorsetup.sh
including device/generic/armv7-a-neon/vendorsetup.sh
including device/st-ericsson/build/vendorsetup.sh
including sdk/bash_completion/adb.bash
[email protected]:/home/xfi/AOSP# lunch
You're building on Linux
Lunch menu... pick a combo:
1. aosp_arm-eng
2. aosp_x86-eng
3. aosp_mips-eng
4. vbox_x86-eng
5. aosp_manta-userdebug
6. aosp_hammerhead-userdebug
7. aosp_mako-userdebug
8. aosp_flo-userdebug
9. aosp_tilapia-userdebug
10. aosp_grouper-userdebug
11. aosp_deb-userdebug
12. mini_mips-userdebug
13. mini_x86-userdebug
14. mini_armv7a_neon-userdebug
15. ste_u8500-eng
16. ste_u8500-user
17. ste_u8500_hats-eng
18. ste_u8500_hbts-eng
Which would you like? [aosp_arm-eng] 15
device/st-ericsson/u8500/BoardConfig.mk:217: vendor/st-ericsson/multimedia/linux/build/Defs.mk: No such file or directory
build/core/config.mk:157: *** TARGET_ARCH not defined by board config: device/st-ericsson/u8500/BoardConfig.mk. Stop.
** Don't have a product spec for: 'ste_u8500'
** Do you have the right repo manifest?
Anyone know how to solve these two problems?
I have to mention that I only unpacked the s-4.1_vendor_st-ericsson.tar.gz in device folder but I think thats not the issue, at least for now.
build/core/config.mk:157: *** TARGET_ARCH not defined by board config: device/st-ericsson/u8500/BoardConfig.mk. Stop.
This line was solved by adding TARGET_ARCH=arm into BoardConfig.mk file. Still searching for the second error solution :/
fixed both problems, now i get this:
Code:
build/core/prebuilt.mk:10: *** dont use LOCAL_PREBUILT_LIBS anymore LOCAL_PATH=vendor/st-ericsson/connectivity/lbs/lbs_mal_client/liblcsclient. Stop.
DarkBloodPro said:
fixed both problems, now i get this:
Code:
build/core/prebuilt.mk:10: *** dont use LOCAL_PREBUILT_LIBS anymore LOCAL_PATH=vendor/st-ericsson/connectivity/lbs/lbs_mal_client/liblcsclient. Stop.
Click to expand...
Click to collapse
http://www.netmite.com/android/mydroid/build/core/prebuilt.mk
https://groups.google.com/forum/#!topic/android-porting/14GzuyEN6Zo
https://android.googlesource.com/platform/build/+/donut-release2/core/prebuilt.mk
http://comments.gmane.org/gmane.comp.handhelds.android.framework/1193

Dirty Unicorns

Go Dirty, Never Clean and make your brain burn
Does anybody have tried or have any experience compiling this rom for our device?
I have spend few hours today figuring out how to do that, found some problems the fixinf them and the another problem and cant move forward.
Got his error:
Code:
make: *** No rule to make target '/home/pajdek/DU/out/target/product/w7/obj/STATIC_LIBRARIES/libqc-art-compiler_intermediates/export_includes', needed by '/home/pajdek/DU/out/target/product/w7/obj/SHARED_LIBRARIES/libart-compiler_intermediates/import_includes'. Stop.
make: *** Waiting for unfinished jobs....
Dont know what to do now any thoughts?
ppajdek said:
Go Dirty, Never Clean and make your brain burn
Does anybody have tried or have any experience compiling this rom for our device?
I have spend few hours today figuring out how to do that, found some problems the fixinf them and the another problem and cant move forward.
Got his error:
Code:
make: *** No rule to make target '/home/pajdek/DU/out/target/product/w7/obj/STATIC_LIBRARIES/libqc-art-compiler_intermediates/export_includes', needed by '/home/pajdek/DU/out/target/product/w7/obj/SHARED_LIBRARIES/libart-compiler_intermediates/import_includes'. Stop.
make: *** Waiting for unfinished jobs....
Dont know what to do now any thoughts?
Click to expand...
Click to collapse
Hi,
I compile several roms for the Galaxy S4, but I have seen this there before. A quick and dirty fix is to do this:
Code:
$ mkdir /home/pajdek/DU/out/target/product/w7/obj/STATIC_LIBRARIES/libqc-art-compiler_intermediates/
$ touch /home/pajdek/DU/out/target/product/w7/obj/STATIC_LIBRARIES/libqc-art-compiler_intermediates/export_includes
Then you have to build dirty, e.g., don't "make clean" before your build.
Another option is to build CM for your phone, then steal the file from the out folder of CM's build and put it in the out folder of your build.
Here is a write up I did on that, if you want to read up on it a bit:
https://thealaskalinuxuser.wordpress.com/2016/06/10/error-no-rule-to-make-target-export_includes/
Hope that helps! Good luck!
Thanks for your reply, i will try that.
Uncle google told me that there were a commit for CM that should fix this.
Two solutions to try

[CLOSED: REPLACED] [HELP NEEDED] Running a full custom ROM using the AVD tool of Andr

Hi everyone,
Today I'd like to dust an old subject that was quite discussed: emulating a custom Android ROM.
There are in threads arround here or in some Stack Overflow subjects (for instance) peoples talking about this, providing ideas or even complete tutorials.
These tutorials show how to use the SDK tools to create an Android Virtual Device to run the desired ROM.
But all these informations are purely deprecated and can't be applied exactly for new touch phones (higher than Jellybean you can't do that!)
Didn't realizing it yet and wanting to try it out I personnally downloaded the latest Android Studio software with the basic SDK tools.
I tried to run commands specified in the tutorials to test some things out (like creating an avd) and actually creating an avd this way is purely deprecated. Well.
 What a good start.
So instead I used the avd tool of the Studio software and I successfully created one.
Got into the C:\Users\%USERNAME%\.android\avd\avdname.avd folder to check components of the avd. I even read .2cow things files to know the location of the missing components (like system.img)
So I am almost done. I prepared my .img files to replace avd img basic components to test my emulated firmware out. But...
I have no idea where to start!!
I am missing some img files that would be necessary to run the avd correctly, like the kernel.img or userdata thing...
I just don't know what to replace or not, how to obtain necessary files without breaking something, I need help...
Here is finally the question of the subject:
Can somebody post out a complete updated tutorial on how to emulate a full custom rom using the AVD tool provided by Android Studio, please? (If possible of course)
This would be really nice and pretty useful for ROM development. I'm still experiencing things, trying to modify the close-to-my-devive avd I generated but this is just messing arround with things, I am pretty inexperienced so I don't think I could help...
Ok, no contribution as expected...
Fortunately I started reasearches despite the fact that I'm not a dev so I have a really really little idea of what I'm doing...
So here are what my researches led to (report with my memory, I will re-edit my post soon to add what I missed) :
Note: I used my SM-G361F pre-rooted ROM to test emulation.
==========*#1*==========
Operations:
•Created a close-to-device AVD (Same API Level etc.)
•Found out AVD dependencies folders: [C:\Users\%USERNAME%\.android \avd\x86 (I guess?)\(devicemodel).avd then another location containing kernel, system.img etc. thanks to .qcow2 files in the previously presented folder ("link" were in.)
•Made a backup of these folders **obvious**
•Edited some configurations (config.ini etc.) to make the final emulated system as close to the real device as possible to avoid incoherences
•Replaced some components of the AVD (build.prop, cache.img, userdata-qemu.img, etc.)
•Replaced the system image in the second folder
•After an hard struggle to get boot.img file of my device, decompiled it to get the ramdisk.img and kernel.img I used to replace kernel-qemu
Test:
•Starting the AVD from Android Studio
=> Outputs option "repair device"
•Attempted a repair: selected... My device SM-G361F to repair.
(=> Weird...)
•Repair seemed to work well according to the fact I could run the AVD
•Statut of the AVD: Black screen. Using power button and all doesn't make anything working: the AVD doesn't react.
=> Quiting made the emulator crash
Initial reason: see troubleshooting section
Result: FAIL
Troubleshooting:
•I shouldn't had to replace kernel-qemu by the stock extracted kernel: it has nothing to do with the actual system because it isn't purely system but device related. Will fix that next time
•ramdisk was badly recompiled: after extracting it from boot.img using Android Image Kitchen I recompiled it with the recompile.bat that ouputs two files: img-new.img (cannot figure what's its utility...) and new-ramdisk.cpio.gz that I simply renamed ramdisk.img. This could be the main reason why the AVD isn't working.
Will look up how to deal with ramdisk soon.
==========**2**==========
Operation:
•Restored the original kernel-qemu from backup
Test:
•The AVD still not show anything but quiting the emulator doesn't trigger any crash now.
Result: FAIL
Troubleshooting:
•As mentionned before will look up ramdisk.img file that seems problematic
Thread closed. But the project of emulating a custom rom is not abandoned.
Actually I didn't find a way to use the new AVD tool provided by Google to reach this goal. Instead I am heading over the new idea of creating a software generating an environment for Android emulation with given components (kernel, system, data etc. prealably extracted or, better, from a backup)
I hope I'll get help in the future because I'm pretty sure I won't be able to do such enormous task alone...
New thread here: https://forum.xda-developers.com/android/development/help-environment-builder-custom-rom-t3758360

Categories

Resources