which is the value that I have to set on the camera sound on build.prop ,right now is set to 1 , which value do I have to set, disabled or 0 for me to have a silent camera (i'm planning on going to an ancient church ) since i dont have a pc to flash anything , i think maybe i'll just ask
sent from the gray stuff inside muy skull
demonoid phenomenom said:
which is the value that I have to set on the camera sound on build.prop ,right now is set to 1 , which value do I have to set, disabled or 0 for me to have a silent camera (i'm planning on going to an ancient church ) since i dont have a pc to flash anything , i think maybe i'll just ask
sent from the gray stuff inside muy skull
Click to expand...
Click to collapse
When you set it to 0, it will allow you to disable sound effect in the camera settings.
The build.prop value will not disable the sound, only add the settings for that in the camera app.
Related
Peoples....has anyone found a way to "tweak" the auto adjust backlight setting?? Would be nice to be able to set the light sensor to a pre-determined value so that it is always that value greater than the ambiant light...
Why??...well, I would like to continue using the same auto setting (saves battery, etc) but have it just a little bit brighter than what it is doing automatically at the moment.
I'm sure there is a way....would be great to have this in Shaps AC or Diamond Tweak....hmmm, perhaps post there to....
Thanks all
Not sure if this helps, but if you untick the box for auto brightness then you can slide the brightness control up and down to set the base setting then re tick the auto box. Let me know if this is what you are wanting. If not just ignore me
johnboywilson said:
Not sure if this helps, but if you untick the box for auto brightness then you can slide the brightness control up and down to set the base setting then re tick the auto box. Let me know if this is what you are wanting. If not just ignore me
Click to expand...
Click to collapse
Nice one, but unfortunetely does not have the desired effect (just checked)....
HOWEVER, this would be a great why to build it into the system i.e. manually set the level thats works best for you in the abient lighting of the moment....then set auto adjust to keep that differential...hmmm...
I would love to find a way to calibrate that. The backlight in darkness is too high for my eyes. When I set it manually I can decrease the brightness to a comfortable degree, but as soon as I turn automatic mode back on, it gets higher.
Agree
aydc said:
I would love to find a way to calibrate that. The backlight in darkness is too high for my eyes. When I set it manually I can decrease the brightness to a comfortable degree, but as soon as I turn automatic mode back on, it gets higher.
Click to expand...
Click to collapse
Same here.
Is there any reg key to set up the minimum value for bl when in darkness..?
Anybody knows ?
Thanks
advanced config v 3
try with it,i ran into few tweaks for light sensor,hope it'll help you
Nope, Advanced Config's light sensor tweaks are only for the new Phone app.
aydc said:
Nope, Advanced Config's light sensor tweaks are only for the new Phone app.
Click to expand...
Click to collapse
yeah you are right ...polling and stuff,i remember now
...quick look....no joy...
Nothing easy to recognise in the Registry...I think this might need a "power" developer...
....er, thats definately NOT me
i found this:
http://gadgetmix.com/index/?p=1109
hi there.
l have noticed a min brightness parameter in the build.prop file which is set to 15. will Changing it to 0 make the screen go black at min level?
rooted 404
There are many such apps like screen filter to do so
these apps seem to interfere in lot of other phone operations. cuz I have read a lot about screen filter issues... wat does this parameter in build prop do
rajsekhar.300 said:
There are many such apps like screen filter to do so
Click to expand...
Click to collapse
Its better to use build.prop if it works, why use an app to change it, it will run in background and drain battery
@OP, it may be dangerous to change it to "0" as if it turns to min brightness you may not be able to change it again due to invisibility.
try it when you have to flash another rom.
nokiamodeln91 said:
hi there.
l have noticed a min brightness parameter in the build.prop file which is set to 15. will Changing it to 0 make the screen go black at min level?
rooted 404
Click to expand...
Click to collapse
Of Course YES....If you would set the brightness to lower level in settings>display>brightness.
sahilarora2003 said:
Of Course YES....If you would set the brightness to lower level in settings>display>brightness.
Click to expand...
Click to collapse
I have tried it..
changed the default from 15 to 0..
earlier i was on min brightness..( slider full left) > screen not black
after changing the build.prop value .> i checked settings in display and the slider can be moved further to the left but does not have any effect on the screen... the brightness on screen stays the same...
Sorry for my english..
when I switch from an app with black screen (notification bar xda app etc etc) to a bright one.. Like whatsapp I see a strange thing... There is less contrast for 0.5sec then contrast is perfect and all is normal...
I don't know if you understand what I mean...
Is this normal? Or is a fault display?
Happens with stock and cyano... Full brightness and at lowest brightness...
thx for the replay
drigerott said:
Sorry for my english..
when I switch from an app with black screen (notification bar xda app etc etc) to a bright one.. Like whatsapp I see a strange thing... There is less contrast for 0.5sec then contrast is perfect and all is normal...
I don't know if you understand what I mean...
Is this normal? Or is a fault display?
Happens with stock and cyano... Full brightness and at lowest brightness...
thx for the replay
Click to expand...
Click to collapse
Thermal throttling is normally given as the answer to this.
Thanks for the fast replay... Then I must change my device? Or it'snormal
drigerott said:
Thanks for the fast replay... Then I must change my device? Or it'snormal
Click to expand...
Click to collapse
Its normal, but there are ways to change the way it does it, I am not an expert but if you root you can start to cange values. Search for thermal throttling values and you will hit a good thread about.
Yes I have root.. But I didn't understand.. For thermal throttle you mean cpu? Or even the display?
cause I don't have problem with multitask or other.. Only this strange problem that image quality is not perfect when switching to dark image to bright one.. But for less then a second.. But is frustrating and strange
drigerott said:
Yes I have root.. But I didn't understand.. For thermal throttle you mean cpu? Or even the display?
cause I don't have problem with multitask or other.. Only this strange problem that image quality is not perfect when switching to dark image to bright one.. But for less then a second.. But is frustrating and strange
Click to expand...
Click to collapse
as i said i am not an expert, but if you search in this forum you will find other threads that will give you information on which files to modify and how to do it...
gregbradley said:
as i said i am not an expert, but if you search in this forum you will find other threads that will give you information on which files to modify and how to do it...
Click to expand...
Click to collapse
ok i found some 3d about termal throttle and is not my problem.. i tried different mod but nothig...
i uploaded a video to show my problem ...
see the contrast change?
is not brightness...it's contrast that changes...
Yes, a have this effect too. I`ve changed brightness values at system/etc/sysmon.cfg, to a maximum values, after that screen doesn`t changing brightness when device is more hot, but this effect like in this video, is still exists! This contrast shading are not a termal throttling, this is something else, i don`t know exactly what it is.
i'm not alone then...
with cyanogenmod is so more evident...
tomorrow i'll turn on another one in my shop and see if is all xperia t like this...
anyway if some other has this strange problem, plz post here ^^ (maybe is a software fault)
Maybe a refresh issue?
when i scroll a page on black background with white txt.. the txt becomes greysh... if you scroll slowly remains white... happens to you too?
drigerott said:
Maybe a refresh issue?
when i scroll a page on black background with white txt.. the txt becomes greysh... if you scroll slowly remains white... happens to you too?
Click to expand...
Click to collapse
I don`t think it`s a refresh rate, but maybe i`n wrong.
And, yes, i have the same issues, and the screen is shading and becomes bright again all the time. Especially this happening when i try to open something or to enter at one of the bookmarks of phone menu, and when the phone "thinking", screen is shading, but then it becomes brighter again. I`m reaaly don`t know what it ies, but it`s not because of a thermal, 100%! I already changed the values of a brightness. I`m sure that all Xperia T phones are with the same issues, it`s bacause of a something in soft.
It has nothing to do with gpu.
Here is data sheet for AS3676 - www1.futureelectronics.com/doc/AUSTRIAMICROSYSTEMS/AS3676.pdf
And here is what DLS is from the data sheet -
8.4.9 DLS - Dynamic Luminance Scaling Input
The pin GPIO1/DLS can be used for dynamic backlight scaling input. Dynamic backlight scaling is used to reduce the power of the backlight especially when showing dark picture contents on the display. The control unit to operate DLS is the display processor sending a PWM signal to the AS3676 and in parallel changing the display content to compen- sate for a reduced brightness backlight.
DLS can be turned off in /system/etc/pre_hw_config.sh -
echo 0 > /sys/class/leds/led_1-lcd/use_dls
echo 0 > /sys/class/leds/led_2-lcd/use_dls
Is it save to turn DLS off ?
Sent from my LT30p using xda app-developers app
peetr_ said:
It has nothing to do with gpu.
Here is data sheet for AS3676 - www1.futureelectronics.com/doc/AUSTRIAMICROSYSTEMS/AS3676.pdf
And here is what DLS is from the data sheet -
8.4.9 DLS - Dynamic Luminance Scaling Input
The pin GPIO1/DLS can be used for dynamic backlight scaling input. Dynamic backlight scaling is used to reduce the power of the backlight especially when showing dark picture contents on the display. The control unit to operate DLS is the display processor sending a PWM signal to the AS3676 and in parallel changing the display content to compen- sate for a reduced brightness backlight.
DLS can be turned off in /system/etc/pre_hw_config.sh -
echo 0 > /sys/class/leds/led_1-lcd/use_dls
echo 0 > /sys/class/leds/led_2-lcd/use_dls
Click to expand...
Click to collapse
great find.. any way yesterday i turned on 5 new xperia t in my shop and all do like mine... that is DSL like peetr say..
but the annoying thing is that on cm10 (that all the ui is gray/dark) DSL is too much visible...) now i'll try to disable it.. i'll report if works
EDIT: still the same..
I don't get how to turn DLS off, what value should i change to turn it off ?
Sent from my LT30p using xda app-developers app
you must edit the file in /system/etc/pre_hw_config.sh
with root explorer or similar and change thise line: (0 instead of 1)
echo 0 > /sys/class/leds/led_1-lcd/use_dls
echo 0 > /sys/class/leds/led_2-lcd/use_dls
0 instead of 1 , and what should i set instead of 2 ? 0 too ?
And, is this save ???
Sent from my LT30p using xda app-developers app
Finally, this will have effect or no?
Because maybe we all have this issue.
Sent from my LT30p using xda premium
all xperia t works like i posted in the video (infact i tried 5 new xperia t all the same)
but that mod is not working.. for me is still the same..
DennisDD78 said:
0 instead of 1 , and what should i set instead of 2 ? 0 too ?
And, is this save ???
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
this is stock
echo 1 > /sys/class/leds/led_1-lcd/use_dls
echo 1 > /sys/class/leds/led_2-lcd/use_dls
change in to this:
echo 0 > /sys/class/leds/led_1-lcd/use_dls
echo 0 > /sys/class/leds/led_2-lcd/use_dls
but i see no difference..
Hello, some one please guide me so i can reduce the min brightness in lollipop, even the lowest is too bright and hurts my eyes at night,
I want to change settings in the rom and dont want to use apps
Take a look at this thread: http://forum.xda-developers.com/showthread.php?t=2893061 is for KK but I think is almost the same for LP
DorianX said:
Take a look at this thread: http://forum.xda-developers.com/showthread.php?t=2893061 is for KK but I think is almost the same for LP
Click to expand...
Click to collapse
Thabks, i tried it already and searched all what i could get from google, still nothing works and most mods need custum kernel or patching service jar which is a bit of a head ache of steps
If i could mod build prop or a sys file
My other phones where already dim at low or i could mod their brightness throu build prop or lcd min value but none is possible on this phone
Gamer4Life said:
Hello, some one please guide me so i can reduce the min brightness in lollipop, even the lowest is too bright and hurts my eyes at night,
I want to change settings in the rom and dont want to use apps
Click to expand...
Click to collapse
#!/system/bin/sh
#night mode
echo 1 > /sys/class/leds/wled:backlight/max_current
Can be used as script or via terminal emulator
If you need more brightness change value after echo
My value>
1 for lowest
3 for normal
25 for max
Yenkazu said:
#!/system/bin/sh
#night mode
echo 1 > /sys/class/leds/wled:backlight/max_current
Can be used as script or via terminal emulator
If you need more brightness change value after echo
My value>
1 for lowest
3 for normal
25 for max
Click to expand...
Click to collapse
Explain little more please?
Okay, fir now i lowered the max current, now the display is really nice and dim how just how i like it
But max brightness is very low now, only if i could only changr thr min value
You can use apktool to decompile framework-res.apk and change the lcd backlight related numbers in /res/values/ files. The lowest setting that I can still see my screen was 2. The lowest manual setting changes but the adaptive brightness doesn't go to the new minimum. But sometimes the framework-res.apk doesn't rebuild properly and you need to restore with recovery and ADB.
Gamer4Life said:
Okay, fir now i lowered the max current, now the display is really nice and dim how just how i like it
But max brightness is very low now, only if i could only changr thr min value
Click to expand...
Click to collapse
Just change value to 25
But you need change this value every time each reboot.
Not a permanent, but a handy solution :3
For me, I made 3 script as widget (in small app), so I can change brightness value as I like.
Yenkazu said:
Just change value to 25
But you need change this value every time each reboot.
Not a permanent, but a handy solution :3
For me, I made 3 script as widget (in small app), so I can change brightness value as I like.
Click to expand...
Click to collapse
I will be grateful if you share with us how to make these shortcuts in small app menu.
Also which setting do you use for night?
For me i tried 3 and i like it. My eyes are very sensitive to light and will make them dry and bit sore
Hello, I downloaded SetEdit on my phone today and I have questions about 2 values
- The first one is deviceLevelList, I know it enables blur effects but for some reason, setting "g:1" to 3 doesn't enable the blur effect and I find the gray background quite annoying
- The second one is a value I modified by accident, it's "misettings.support.repost", I don't know what it does so I set it back to 1 but if anyone knows what it does, I would love to know!
Thanks in advance