Hello, so I saw u need another recovery to install this rom. It will boot automaticily when you go in recovery, but is there a way to boot samsung recovery?
Sent from my GT-S5830i using xda app-developers app
Oh and is it real Jelly bean or what?
Sent from my GT-S5830i using xda app-developers app
No
Sent from my Galaxy Ace i using xda app-developers app
I use ClockWorkRec5830i.zip from section dev and it does not install in boot ... it's temporary install that will vanish after reboot ... I install that rom that way :
1. Flash stock rom xxl1 with odin 1.84
2. Go to stock recovery (e3) and chose from sd card clockworkrec5830i.zip to install
3. You will be right now in cwm
4. Now you make wipe cache, dalvik and wipe reset
5. Remember to mount system and data partition
6. Flash v.2.1 simplicity rom
7. Reboot
After that i go once again to recovery and use cwm to install those 3 patches from thread (one of them is for google contacts synchronize )
After that reboot and working
I try to flash that rom half a day and my mistake was not mounting partitions ... always i was have brick
Sorry for my bad english
Related
hi! i want to install this room
[ROM] ROCKET ROM - v22 - XXLA6 [Update 07/02] - JKay Mod 13.5.1 - MIUI Style Theme
sorry im a newbie at this.
right now im currently running stock XXLA1 and i used the CF-Root LA1 kernel..
i need help on how to install this room properly. thank you!
Download rocket rom file n put on SD card
- Open CWM, select Reboot in recovery
- From recovery select flash Zip, n point to file you have put on SD card
-Flash
dr.ketan said:
Download rocket rom file n put on SD card
- Open CWM, select Reboot in recovery
- From recovery select flash Zip, n point to file you have put on SD card
-Flash
Click to expand...
Click to collapse
thank you for the quick reply and the guide. by the way do i have to clear cache and clear dalvk?
weng_cas said:
thank you for the quick reply and the guide. by the way do i have to clear cache and clear dalvk?
Click to expand...
Click to collapse
Based on the author's page:
http://forum.xda-developers.com/showthread.php?t=1380284
IMPORTANT1: ROM is NoWipe, but I STRONGLY recommend to do a FullWipe before!! No bug reports without making FullWipe before!!! Reboot your device twice after flashing ROM!!!
IMPORTANT2: Freeze Wifi-Sharing
IMPORTANT3: There is no need to flash any previous updates on top - it's all included!
I would recommend you clear cache and clear dalvk.
Also apply the hotfixes in the link above for v22 if required in your case.
I just tried it. I clear cache and dalvik. Then i flash the zip. It installed less 20 secs and it says install succesful. Then i rebooted my phone. It stuck in the samsung gt-n7000 logo.
Help me plz. Did i do somthing wrong?
Sent from my GT-N7000 using XDA App
Reboot twice
wipe data as well then reflash zip file if needed
Sent from my GT-N7000 using xda premium
Yes sir i did a full wipe.
Sent from my GT-N7000 using XDA App
Reflash zip file again, this shud work
Sent from my GT-N7000 using xda premium
Ok. I will try it again thanks.
Sent from my GT-N7000 using XDA App
Its still did not work. Did everything. It just stuck in the samsung galaxy note logo.
Sent from my GT-N7000
It is strange, have you check file size you have downloaded is correct? I mean ot was not corrupt
Sent from my GT-N7000 using xda premium
yup, the zip file is 577 mb..
before i rooted my SGN i followed your guide on how to root+cwm, it was more easier than installing this roket room. your guide was very neatly organized and comprehensive.
weng_cas said:
yup, the zip file is 577 mb..
before i rooted my SGN i followed your guide on how to root+cwm, it was more easier than installing this roket room. your guide was very neatly organized and comprehensive.
Click to expand...
Click to collapse
Try the exact steps below, it should work for you as it worked for me:
1. Flash chinese ICS ROM using MobileOdin (tar file - when you download it comes as a ZIP file so extract the whole TAR out)
2. Wait for successful bootup of Chinese rom. Don't setup google account but you should be booted into ICS.
3. Turn off your phone and boot into recovery mode
4. Do a factory reset, Wipe cache, and wipe dalvik (DO NOT REBOOT)
5. While still in recovery, flash 1.4 rocket and DO NOT REBOOT when done
6. Do a factory reset, Wipe cache, and wipe dalvik (yes for a 2nd time)
7. Now select restart phone option. You should boot into Rocket ICS. It takes a few minutes on the Samsung logo so be patient
8. Once you are in ICS, setup your google account
9. Using CWM app, reboot to recovery
10. Flash rocket v 1.5 (DO NOT DELETE ANYTHING)
11. When done, select restart phone option
You should boot into 1.5 ICS - again be patient if it takes longer at Samsung logo. This is only for the first boot - much faster afterwards.
Let us know if this wors.
ok. i will try later if it works. thanks
+1
Sent from my GT-N7000
i have downloaded rafael latest kernel to use it with the jelly blast rom but it just keep bricking mu phone , so ive returned to stock rom and kernel using Odin , can somebody show me step by step how to do , i have done it like 6 times but it doesnt work :c
Did you try formatting /system, /data and /cache (and mounting them before flashing)?
GermainZ said:
Did you try formatting /system, /data and /cache (and mounting them before flashing)?
Click to expand...
Click to collapse
Yes i have done it all
Bastyle 21 said:
Yes i have done it all
Click to expand...
Click to collapse
try installing latest kernel when you are in stock rom...after that u change to jelly blast,,i think this might help u..
Install E3 (Stock Recovery) Version. And make sure you have Temporary CWM.
1- Restart into Recovery Mode
2- Install Zip from Sd: Temporary Clockwork
(You should be in CWM Recovery)
3- Wipe Data
4- Wipe Cache
5- Advanced/ Reboot Recovery
(You should be in Stock Recovery now)
6- Install zip/ (Kernel File)
7- Restart, and hold Vol Up+Home+Power (Recovery mode again)
8- Install zip/ (Jellyblast)
9- Install zip/ (Modules)
That's what i did, and it worked. Best Kernel and Best Rom for now
Sent from my GT-S5830i using xda app-developers app
GaboGubo said:
Install E3 (Stock Recovery) Version. And make sure you have Temporary CWM.
1- Restart into Recovery Mode
2- Install Zip from Sd: Temporary Clockwork
(You should be in CWM Recovery)
3- Wipe Data
4- Wipe Cache
5- Advanced/ Reboot Recovery
(You should be in Stock Recovery now)
6- Install zip/ (Kernel File)
7- Restart, and hold Vol Up+Home+Power (Recovery mode again)
8- Install zip/ (Jellyblast)
9- Install zip/ (Modules)
That's what i did, and it worked. Best Kernel and Best Rom for now
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
7th point stock or cwm recovery?
Sent from my GT-S5830i using xda app-developers app
GaboGubo said:
Install E3 (Stock Recovery) Version. And make sure you have Temporary CWM.
1- Restart into Recovery Mode
2- Install Zip from Sd: Temporary Clockwork
(You should be in CWM Recovery)
3- Wipe Data
4- Wipe Cache
5- Advanced/ Reboot Recovery
(You should be in Stock Recovery now)
6- Install zip/ (Kernel File)
7- Restart, and hold Vol Up+Home+Power (Recovery mode again)
8- Install zip/ (Jellyblast)
9- Install zip/ (Modules)
That's what i did, and it worked. Best Kernel and Best Rom for now
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
dude "6- Install zip/ (Kernel File)" what file is that??? is that (e3,cwm,rz)boot.img file!!!!
andy.acei said:
7th point stock or cwm recovery?
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Stock
aravindraj said:
dude "6- Install zip/ (Kernel File)" what file is that??? is that (e3,cwm,rz)boot.img file!!!!
Click to expand...
Click to collapse
E3
Sent from my GT-S5830i using xda app-developers app
Bastyle 21 said:
i have downloaded rafael latest kernel to use it with the jelly blast rom but it just keep bricking mu phone , so ive returned to stock rom and kernel using Odin , can somebody show me step by step how to do , i have done it like 6 times but it doesnt work :c
Click to expand...
Click to collapse
friend try this....
1) copy necessary kernel files e3boot.img and modules.zip to sdcard
2) restart mobile to e3 recovery mode..
3) flash e3boot.img file.
4) reboot again into e3 recovery mode.
5) now flash with modules.zip file..
6) reboot...
thats it u will be having new kernel...today i tried this im successfull
aravindraj said:
friend try this....
1) copy necessary kernel files e3boot.img and modules.zip to sdcard
2) restart mobile to e3 recovery mode..
3) flash e3boot.img file.
4) reboot again into e3 recovery mode.
5) now flash with modules.zip file..
6) reboot...
thats it u will be having new kernel...today i tried this im successfull
Click to expand...
Click to collapse
So there is no need to wipe data?
Sent from my GT-S5830i using xda app-developers app
andy.acei said:
So there is no need to wipe data?
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
no friend i didn wipe any data...i did those steps thats it..i have tried different ways to install kernel by wiping data cache blah blah nothing helped me..atlast those steps i just gave a try and it helped me
Here's the problem can anyone help me upon this.
I was using Cynogen Nightly 9.1 version then I saw [ROM][JB][4.2.1][18/01/13] CyanAOSP v0.5.2 [Stable | For Gaming] seems amazing so then I downloaded and installed successfully. Everything seemed okay but as the ROM started it was giving me a constant error which was like "Wizard stopped working" I was totally unable to get my hands on this rom.
So I then updated my rom again to cyanogen 10.1 Nightly.
my question is should install it now will it work fine?
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
I think something went wrong when you installed the first time.
Follow this steps and it should work:
1. Backup your data
2. Enter recovery
3. Wipe data/factory reset
2. Wipe Cache
3. Wipe Dalvik Cache
4. Under mounts and storage --> format/system
5. Then install the zip
6. Enjoy
Sent from my GT-I9000 using xda app-developers app
KUN1 said:
I think something went wrong when you installed the first time.
Follow this steps and it should work:
1. Backup your data
2. Enter recovery
3. Wipe data/factory reset
2. Wipe Cache
3. Wipe Dalvik Cache
4. Under mounts and storage --> format/system
5. Then install the zip
6. Enjoy
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Everything went okay even rom was installed but I was getting that error and I am pretty sure I have followed all steps.
wpid data/factory
wipe cache
wipe dalvik cache
format system as well as format datadata.
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
Hmm then i also don't know what went wrong
Sent from my GT-I9000 using xda app-developers app
Same Here!
KUN1 said:
Hmm then i also don't know what went wrong
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi, I also tried the ROM and got the same message (setup wizard...)as you did. After all the "wipes" and format "system" and "datadata" i also made the error of formating SDcard.
Now I have my phone in Restart loop showing Galaxy S logo and then SEMAPHORE....and loop.....and loop....
Sugestions?
Thanks in advance
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
KidCaboz said:
Hi, I also tried the ROM and got the same message (setup wizard...)as you did. After all the "wipes" and format "system" and "datadata" i also made the error of formating SDcard.
Now I have my phone in Restart loop showing Galaxy S logo and then SEMAPHORE....and loop.....and loop....
Sugestions?
Thanks in advance
Click to expand...
Click to collapse
If you can enter recovery try to wipe data and install again ( under mounts and storage you can mount USB and put files on your sd)
If you can't enter recovry you have to flash GB over Odin
Sent from my GT-I9000 using xda app-developers app
Witch files? where? Is there a post with instalar procedure?
Sent from my GT-P5110 using xda app-developers app
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
KidCaboz said:
Witch files? where? Is there a post with instalar procedure?
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
You can install every Rom if you can enter recovery.
Sent from my GT-I9000 using xda app-developers app
Witch files? where? Is there a post with instalar procedure?
Not entering recovery. Only Odin possible
Sent from my GT-P5110 using xda app-developers app
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
KidCaboz said:
Witch files? where? Is there a post with instalar procedure?
Not entering recovery. Only Odin possible
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
There are many tutorials for Odin
Sent from my GT-I9000 using xda app-developers app
Since i'me geting errors flashing files with Odin, my question is:
The Lógic and order of instalation using Odin should, be :
1-flash firmware or kernell file
2-flash ROM of choice
3-flash, goapps file
Thanks
Nuno
Sent from my GT-P5110 using xda app-developers app
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
If you start from GB then the order is nornally the following:
-Flash GB (1 or 3 parts)
-Root (flash a kernel via odin)
-Install Rom via recovery
-evtl. Gapps
Sent from my SGH-9000 using xda app-developers app
anybody installed this rom?
can make tutorial for installation? i have galaxy mini with stock rom 2.3.6 unrooted!
what you need for install?
sry for bad english!!
follow this steps
Copy the downloaded files to the (root directory of) your sd-card.
Reboot your device to Custom Recovery (Press Home + Power Button).
note : you have to install cyanwork mod for it ..
[Optional but, Recommended] Do a Nandroid Backup of your current rom.
Now from recovery main menu and select Wipe Data option.
Confirm data wipe by selecting Yes.
Now flash this CM10 custom rom following the steps below in clockworkmod recovery :
Choose Install Zip From Sd Card option.
Select Choose Zip From SD Card option.
Now select ur rom d
Confirm the installation and wait till the rom is installed on you handset.
Reboot your device from your recovery main menu when done.
and enjoy
rahultiwari1295 said:
Copy the downloaded files to the (root directory of) your sd-card.
Reboot your device to Custom Recovery (Press Home + Power Button).
note : you have to install cyanwork mod for it ..
[Optional but, Recommended] Do a Nandroid Backup of your current rom.
Now from recovery main menu and select Wipe Data option.
Confirm data wipe by selecting Yes.
Now flash this CM10 custom rom following the steps below in clockworkmod recovery :
Choose Install Zip From Sd Card option.
Select Choose Zip From SD Card option.
Now select ur rom d
Confirm the installation and wait till the rom is installed on you handset.
Reboot your device from your recovery main menu when done.
and enjoy
Click to expand...
Click to collapse
mmmh.. afaik it's not recommended for backinup stock, coz we can't. so just back up user apps.
and you need to install cwm/clockworkmod recovery before flashin custom rom. (not cyanworkmod though)
Одг: [Q] Cm10 R2 installing on Galaxy mini(GT-S5570)
I cant root. I have superuser app but not work!
Sent from my GT-S5570 using xda app-developers app
mickey4398 said:
I cant root. I have superuser app but not work!
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
i think that you should try universal_gb_root_v26.zip to root this 2.3.6 stock rom
kokonelos said:
i think that you should try universal_gb_root_v26.zip to root this 2.3.6 stock rom
Click to expand...
Click to collapse
i tryed 3 differnet files. and unrooting but nothing. screenshoot tonight!!
i installed custom recovery ClockWorkMode V4 succefully:laugh:
mickey4398 said:
i tryed 3 differnet files. and unrooting but nothing. screenshoot tonight!!
i installed custom recovery ClockWorkMode V4 succefully:laugh:
Click to expand...
Click to collapse
root problem
You don't need to have root to flash a rom
Just wipe data
Flash rom
Wipe data
dheeraj (dhlalit11) said:
You don't need to have root to flash a rom
Just wipe data
Flash rom
Wipe data
Click to expand...
Click to collapse
thanks man!!! now have rooted and installed CM10 :good:
when installing new relase i need do same procedure ??
wipe partition& data , insall update wipe , reboot?
inn this rom bugs...
wifi signal strenght is not true , lock screen when appolo is runnung is black ..
evryhing works fine.camera app and recorder
If updating the same rom then no need to wipe data
dheeraj (dhlalit11) said:
If updating the same rom then no need to reboot
Click to expand...
Click to collapse
BUT, it's recommended to wipe data cause you can have faster & cleaner system.
BTW, correct "then no need to reboot" to "then no need to wipe data"
dheeraj (dhlalit11) said:
If updating the same rom then no need to wipe data
Click to expand...
Click to collapse
a wipe partition,upate srom .zip & reboot?
When I try to flash Dirty Unicorns 4.4 rom it gets blocked even in CWM & TWRP. What should I do ?
(Sorry for bad english)
What do you mean please explain?
Sent from Mobile
NC4777 said:
What do you mean please explain?
Sent from Mobile
Click to expand...
Click to collapse
The rom doesn't install . Thanks for help
leomatia said:
The rom doesn't install . Thanks for help
Click to expand...
Click to collapse
Tell us something more, what error you get...
Do you have one of latest CWM (like version 6.0.4.5)? (What ROM are you using now?) If not, try installing CM 10.2 first and then 4.4 ROM.
PS. If you have Android =< 4.2 you will get status 7 error on first try when installing Android 4.3+. So after error you have to 'reboot to recovery' and install the ROM again.
Follow this:
Reboot into Recovery
Wipe data/factory reset
Wipe cache partition
Advanced > Wipe dalvik cache
Main menu
Install zip from sdcard
Choose zip from sdcard(internal)
Select your rom zip and confirm
Your phone at this moment may reboot automatically and come into a bootloop or show status 7 error or set_metadata_error so you need to flash the rom again.
Remove battery and reboot into new recovery and then flash the zip.file after that again reboot into recovery wipe everthing and flsah your rom and reboot
Sent from my GT-I9000 using Tapatalk 2
slim 4.3 > KK always works for me.same for downgrading..KK > slim 4.3
AreXe said:
Tell us something more, what error you get...
Do you have one of latest CWM (like version 6.0.4.5)? (What ROM are you using now?) If not, try installing CM 10.2 first and then 4.4 ROM.
PS. If you have Android =< 4.2 you will get status 7 error on first try when installing Android 4.3+. So after error you have to 'reboot to recovery' and install the ROM again.
Click to expand...
Click to collapse
I have CWM 6.0.4.5. I'm on Carbon Rom 4.4 and I have done all wipes needed but when I try to flash the rom it doesn't flash and doesn't show any error. It just stays on flash screen
TeKnoGin said:
Follow this:
Reboot into Recovery
Wipe data/factory reset
Wipe cache partition
Advanced > Wipe dalvik cache
Main menu
Install zip from sdcard
Choose zip from sdcard(internal)
Select your rom zip and confirm
Your phone at this moment may reboot automatically and come into a bootloop or show status 7 error or set_metadata_error so you need to flash the rom again.
Remove battery and reboot into new recovery and then flash the zip.file after that again reboot into recovery wipe everthing and flsah your rom and reboot
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Done everything and still doesn't flash. It doen't show any error either,it just stays on flash screen
Then you could try to revert to stock Gb 2.3.6 using Odin and then use the methods described above by AreXe or OmreJ to update 2.3 > 4.4
Sent from my GT-I9000 using XDA Premium 4 mobile app
Cyrd said:
Then you could try to revert to stock Gb 2.3.6 using Odin and then use the methods described above by AreXe or OmreJ to update 2.3 > 4.4
Sent from my GT-I9000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I will get it a try if it doesn't work on 4.3 either