Database Develop

[Q] please help me To downgrade ics 4.0.1 to gingerbread 2.3.x

How to downgrade from 4.0.1 ICS to 2.3.x gingerbread Is it possible ?? plz help me

download and flash any stock which you want or cyanogenmod if you want that..
follow noob guide if you don't know about what i said

Sorry dont understand but i will try

gexis said:
Sorry dont understand but i will try
Click to expand...
Click to collapse
well haven't you made any nandroid backup before installing 4.0.1??

I didnt take any backup if we install 2.3.x normally will like update will it work ??? or we needed to format the whole phone & needed to install fresh or we cannot ?? actually i didnt update yet i want to know becoz i want to update it from 2.3.6 to 4.0.1 for galaxy ace Just found here.
Watch the video it's awesome
http://www.youtube.com/watch?v=_32fY4_6gvM
Fourm Link
http://forum.xda-developers.com/showthread.php?t=1406317

gexis said:
I didnt take any backup if we install 2.3.x normally will like update will it work ??? or we needed to format the whole phone & needed to install fresh or we cannot ?? actually i didnt update yet i want to know becoz i want to update it from 2.3.6 to 4.0.1 for galaxy ace Just found here.
Watch the video it's awesome
http://www.youtube.com/watch?v=_32fY4_6gvM
Fourm Link
http://forum.xda-developers.com/showthread.php?t=1406317
Click to expand...
Click to collapse
i used all the alphas so i would suggest you not to update right now as you will complain and will go back to gingerbread within 1-2 days [even less].. its in dev stage.. so let it be daily usable and then update....
if you are very much eager to update it then you have to follow same procedure used for installing custom roms.. do take backup of current rom as it will wipe [format] all stuffs

I'm just putting this bit of some a**hole-y advice:
If you don't know how to downgrade back to GB, you shouldn't really flash ICS.

its easy....download any rom of 2.3.x u want to install
put it into ur sdcard
open ur phone in recovery mode
chose install zip from sdcard
select the zip file u downloaded
let it install
then do a factory reset from recovery and wipe cache then reboot n u will be booting in 2.3.x

the legacy version of 4.0.1 works kinda good
i.ve installed nova launcher etc
and it works great only some bugs
Are you looking to me?? i have an chinese ARMY !! (-(-(-.-)-)-)

Please help for Samsung galaxy ace downgrade 4.0.1 to 2.3.6
can somebody help
i have s3 evolution 4.0.1 in my galacy ace but battery backup is not good
i want to downgrade my ace 4.0.1 to 2.3.6 gingerbread

[Q] please help me!:(( fix lags and rooting ? T_T

i'm using samsung galaxy S Gt-I9000
2.2 android version
baseband version I9000xxjp3
kernel version 2.6.32.9 [email protected] #1
what's difference between rooting and flashing?>.<
how to root my phone? the easiest and safest way~
and do you know how to fix lags? my samsung galaxy S (Gti900) is soo laggy pls help meT_T that's my major problem.. too laggy( and keeps keeps freezing..force closes apps. etc.
WHAT SHOULD I DO?
PLEASE HELP ME T.T
thanks in advance!!>.<

mimi21 said:
i'm using samsung galaxy S Gt-I9000
2.2 android version
baseband version I9000xxjp3
kernel version 2.6.32.9 [email protected] #1
what's difference between rooting and flashing?>.<
how to root my phone? the easiest and safest way~
and do you know how to fix lags? my samsung galaxy S (Gti900) is soo laggy pls help meT_T that's my major problem.. too laggy( and keeps keeps freezing..force closes apps. etc.
WHAT SHOULD I DO?
PLEASE HELP ME T.T
thanks in advance!!>.<
Click to expand...
Click to collapse
First of all: Have you considered updating your Firmware with Samsung Kies or OTA? You are still on Froyo but the latest official Samsung Update for the i9000 is 2.3.x Gingerbread ( you can do it OTA. For this, go in your phone to settings--> about phone--> system updates).
Second: You need root rights to install custom ROMs and some apps like NSTOOLS (for e.g.). Here is a link, which shows you how to root your I9000 running Froyo: http://www.addictivetips.com/mobile...t-samsung-galaxy-s-i9000-with-a-single-click/
Flashing means nothing else then to install a newer version of your operating system.
Third: When you update (flash) your device, the lags should be gone.

Samsung kies cannot view/read my firmware version and i dunno why:/
i really wanna fix this mobile bcoz it's too laggy and keeps freezing.. T_T
how to flash my mobile? what's the difference between flash and upgrade?? and the rooting link that you gave me isn't working anymore.. no more megaupload:/
pls help meeee thans>.<

mimi21 said:
Samsung kies cannot view/read my firmware version and i dunno why:/
i really wanna fix this mobile bcoz it's too laggy and keeps freezing.. T_T
how to flash my mobile? what's the difference between flash and upgrade?? and the rooting link that you gave me isn't working anymore.. no more megaupload:/
pls help meeee thans>.<
Click to expand...
Click to collapse
Have you tried updating over the air (OTA) ?
Maybe you should consider this option: http://forum.xda-developers.com/showthread.php?t=1494493
Try to do it step by step.
P.s.: All your phones data will be lost.
P.p.s: Flash and upgrade is basically the same. But flashing is a common expression, when you do it on your own and not via KIES oder OTA (that´s how I explained the difference for myself ;-) .

that's ics? how bout gingerbread? sorry i'm just a beginner..
how to flash it the easiest way? i mean just to fix lags etc. ~

Try it here:
http://forum.xda-developers.com/showpost.php?p=14273101&postcount=1
It´s for Gingerbread and you´ll find everything you need in this thread to flash your device. If you have any question, feel free to ask. But I´m sure you can handle it! It´s really easy.
P.s.: The easiest way would be with KIES! But this obviously don´t work for you.

Hi Mimi my recommend for you that's to flash one of the ics rom its really fast .. my galaxy i9000 was like your I flashed the ics (right now I am use dark knight 2.1) and now I am happy from this rom flash it you will happy:
1)first flash a stock rom in Odin (you will found how to do that in the forum)
2) download the zip file for your rom(that you want to flashed(my recommend its onesomic or dark knight2.1)
3) do full wipe
4)recovery mode>install zip from SD card>choosing the zip>yes-install
5)flash a kernel(my recommend last semaphore kernel(right now 0.9.1))
Then injoy with fast galaxy s i9000..
Good luck...!
NOTE:its really easy don't afraid if you had any problem in the flashing rom we here to help you ...
I hope for you good luck !!
Sent from my GT-I9000 using xda premium

[q] help required!!!

Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..

CookieRaider said:
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
Click to expand...
Click to collapse
If its rooted then it has clock work mod recovery install, so just install rom manager from market and select reboot into recovery, have the custom rom's zip copied on your memory card, then after rebooting into recovery do wipe data and reset then select install zip from memory card and select the copied .zip file and it gets install new rom. Zeus is good custom rom, marvel v7 is also good
Sent from my LG-P970 using Tapatalk 2

i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...

CookieRaider said:
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
Click to expand...
Click to collapse
did you do a full wipe before flashing cm7?wipe data/cache and dalvik cache through cwm.anyway since you are new to the forum check this thread.it will help you a lot.
http://forum.xda-developers.com/showthread.php?t=1487105

ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:

CookieRaider said:
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
Click to expand...
Click to collapse
i mostly use zeus 6.11 2.3.4 v20o version.zeus is very stable and fully working but some people experienced sods.here is the thread:http://forum.xda-developers.com/showthread.php?t=1454274
at the moment i use miui but some features are not working:http://forum.xda-developers.com/showthread.php?t=1588360
i have used them all from time to time and marvel is great too with aroma installer (gingerbread 2.3.4 v20o).very stable too:http://forum.xda-developers.com/showthread.php?t=1473592
regarding your problem now.are you able to enter cwm?if yes flash zeus or marvel at first.check the development section.it has many choises there and you can find every information in the first posts.

wic android version of gingerbread do you have on your phone..
sorry for asking again...

CookieRaider said:
wic android version of gingerbread do you have on your phone..
sorry for asking again...
Click to expand...
Click to collapse
In zeus gingerbread 2.3.4 v20o.now that i have miui it is 2.3.7.
Sent from my P-970 using Tapatalk

thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7

CookieRaider said:
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
Click to expand...
Click to collapse
The miui in the thread that i posted above is based on gingerbread 2.3.7.like cm7 which is also 2.3.7.
Sent from my P-970 using Tapatalk

to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??

CookieRaider said:
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
Click to expand...
Click to collapse
No you just need to have root access and cwm recovery.just remember to do full wipe before flashing a rom.
Sent from my P-970 using Tapatalk

n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??

CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
I think that you have not quite understand.whichever rom you are going to flash has a specific base.for example zeus has 2.3.4 v20o as a base.when you flash it your phone will have 2.3.4 v20o as a base.what you had before is irrelevant.since you flash a different based rom your firmware will change.take a look at the noob how to that i posted above.it refers to kernels and bases.if you flash nova rom for example then you go back to 2.2.2 froyo.if you flash miui you have 2.3.7.it foesn't matterwhat you have now.try to find some things on your own because we went way off topic and the moderator will close the thread.search is your assistant.
Sent from my P-970 using Tapatalk

ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:

CookieRaider said:
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
Click to expand...
Click to collapse
No inconvinience.if you want send me pm better for info.i told you that because the moderator will delete the thread if we are off topic.and for thanks you can just hit the thanks button.
Sent from my P-970 using Tapatalk

CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
once youre rooted, it dosent matter what base youre using..... cos when you flash a rom you flash together with the base so it changes your whole phone software..... so its no problem switching between bases, you can even flash back froyo/ donut and go back to gb if you want.... but make sure you do your full wipes...
for roms,once rooted, only the type of device is specific.... type of base is not....(unless specified)
eg. you cannot flash an ics rom made for htc evo on your OB but what you can do is flash any kind of rom with any kind of base which was made specifically for OB
again, please do read...
Noobys How to Thread
Rom Installation Step By Step
--

even if i downloaded cyanogenmod 7 it didnt work for me..
i wiped all caches(dalvik, battery stats, factory reset) bt my went in bootloop during rebooting n i had to flash my firmware again..
why did dis happen??

Did you checked md5 checksum? Maybe file was corrupted.
Trolling in the deep

can you suggest any app for checking it??

[Q] Switching from 2.3.6 to android 4, witch root.

I have a Samsung galaxy s and i want to upgrade it to android 4.
But now first i have to root it, but i can't find any root for this buildnummer.
Buildnummer is Gingerbread.BUJVG
Baseband is I9000BUJV4
As far as i know its not a Netherlands version.
Maybe you guys can help me out what root version i have to use ?
Greets

need to upgrade to jvt latest. no such cf root for jvg
read carefully here n make sure its really i9000
http://forum.xda-developers.com/showthread.php?t=1583026
n here also
http://forum.xda-developers.com/showthread.php?t=2149455
both is jvt n jvu, basically general in flashing firmware, both firmware general but read carefully first.
Sent from my GT-I9000 using xda app-developers app

jordy55 said:
I have a Samsung galaxy s and i want to upgrade it to android 4.
But now first i have to root it, but i can't find any root for this buildnummer.
Buildnummer is Gingerbread.BUJVG
Baseband is I9000BUJV4
As far as i know its not a Netherlands version.
Maybe you guys can help me out what root version i have to use ?
Greets
Click to expand...
Click to collapse
Alternatively, bit more hassle, but,
There's a very handy app called Framaroot in the Apps and Games section which should *theoretically* root any 2.3.6 for our phone. I don't know whether BUJVG would be supporte, although I don't see why not.
Use that to root, then download Semaphore GB and SGS kernel flasher, both in these forums. Install SGS kerne flasher, flash Semaphore GB (or any other GB kernel that could perhaps support your firmware, last time I checked kernels were firmware specific. So you may have to do a bit of digging around to see if there's a kernel that supports all.)
If not, try find a CWM flasher (and don't use ROM manager on Play Store, that's not very helpful...) of some kind.
Bit more hassle, and considering your phone's firmware seems to be localised and not a more generic firmware it may not work, but hey, worth a shot.
If that doesn't work, follow the guide compacity posted.
Sent from my GT-P7510 using Tapatalk HD

Is your phone an i9100 Galaxy S2 by any chance if so look for I9100XWKK2 Android 2.3.6 Gingerbread Stock ROM
If its not and is an i9000 let me know

Thank you all for your reactions,
It was some search work and a hassle but it worked
This thread can be closed now
greets

witch root
same problem
samsung galaxy s i9000
Baseband version :I9000BUJV4
kernal core:2.6.35.7-I9000BUJVG-CL719381
gingerbread.bujvg
could anyone help me with CF-Root for this

zelimir1 said:
could anyone help me with CF-Root for this
Click to expand...
Click to collapse
Go here and flash the GIngerbread Semaphore kernel, you will get root and CWM or use framaroot app, if you only want root.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
Go here and flash the GIngerbread Semaphore kernel, you will get root and CWM or use framaroot app, if you only want root.
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
i want root first and than flash it so i can upgrade rom

zelimir1 said:
i want root first and than flash it so i can upgrade rom
Click to expand...
Click to collapse
you don't have to root first, you can flash the JVU ROM and CF Root, to get Root and CWM at one go.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
you don't have to root first, you can flash the JVU ROM and CF Root, to get Root and CWM at one go.
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
so which kernal should i download for my phone gingerbread

zelimir1 said:
so which kernal should i download for my phone gingerbread
Click to expand...
Click to collapse
the downloads are listed for you on that link, you need to read and comprehend it, if you are flashing the JVU ROM, the kernel is already attached with it, if you want to flash the kernel only already mentioned earlier download gingerbread semaphore kernel latest version will do.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

[Q] [Q installing custom rom

question is.can i install a rom dat has a higher android version . for example my phone is running 2.3.4 and iwant to install a rom dat says 2.3.X(higher) or 2.4.x or 4.1.x?? do ineed to update my software or just install directly a custom rom?

crayzajhie said:
question is.can i install a rom dat has a higher android version . for example my phone is running 2.3.4 and iwant to install a rom dat says 2.3.X(higher) or 2.4.x or 4.1.x?? do ineed to update my software or just install directly a custom rom?
Click to expand...
Click to collapse
You have posted in the Wrong Section. Questions go in the Q & A Section. Read the Sections before you post or just understand it, buddy. Answering your question, first root your Phone. Second, flash CWM Recovery. This will allow you to install ROM's. Third, choose the ROM of your choice. It can be any Versions starting from 2.2 to 4.4(CM 9 to CM11). CM7 is the best and lag free for our Phones with Good Battery Backup when compared to CM9 & CM10

I guess u can easily to install custom rom, no need to update your software...
Sent from my GT-S5830 using Tapatalk 2