Anyone have experience with this mount? It seems like a high quality mount but I want to know if anyone who has it likes it and if it is able rotate and stay in the mount landscape.
http://www.proclipusa.com/default.aspx
ProClipUSa is the very best
I have been using their car mounts for almost a decade and their products are top notch. You get what you pay for: Quality
For the note 1 I got this as I wanted some flexability whitch will come in handy for me as my AT&T GNote 2 has now shipped.
http://www.proclipusa.com/brodit-de...ces-with-or-without-a-skin-875214A-13978.aspx
I would confirm by email with ProClip that this is the proper model, adjustable holder, for the GNote 2 if you choose to go adjustible. If you want to go for the specific holder for the Gnote 2 or any device for that matter, use their wizards.
Their products are expensive but worth every penny IMO.
Claude H.
Yes. Their products are very very good quality. I bought 3 device mounts and 2 vehicle mounts from them. They are expensive and very good.
One of the holder is for Gnote 1, not 2, they are even compatible to the extended battery from Mugan. I am very satisfy.
Sent from my GT-N7105 using Tapatalk 2
claude4 said:
I have been using their car mounts for almost a decade and their products are top notch. You get what you pay for: Quality
For the note 1 I got this as I wanted some flexability whitch will come in handy for me as my AT&T GNote 2 has now shipped.
http://www.proclipusa.com/brodit-de...ces-with-or-without-a-skin-875214A-13978.aspx
I would confirm by email with ProClip that this is the proper model, adjustable holder, for the GNote 2 if you choose to go adjustible. If you want to go for the specific holder for the Gnote 2 or any device for that matter, use their wizards.
Their products are expensive but worth every penny IMO.
Claude H.
Click to expand...
Click to collapse
Are you saying here that the adjustable mount will in fact work with the Note 2? I called their customer support regarding this and was told it does not adjust to fit the Note 1 nor the Note 2. You used this holder with your Note 1?
Pandemoniumone said:
Are you saying here that the adjustable mount will in fact work with the Note 2? I called their customer support regarding this and was told it does not adjust to fit the Note 1 nor the Note 2. You used this holder with your Note 1?
Click to expand...
Click to collapse
I have the adjustable mount and it works with the Note 1 with a TPU case on. So it will definitely work for the Note 2. I can take some pictures if you'd like.
Evo 4G63 said:
I have the adjustable mount and it works with the Note 1 with a TPU case on. So it will definitely work for the Note 2. I can take some pictures if you'd like.
Click to expand...
Click to collapse
Appreciate the offer but no need. I'll be ordering this straight away!
I've gone with the ProClip mount since the beginning, I can vouch for the quality as well.
Sent from my SGH-T889 using Tapatalk 2
Pandemoniumone said:
Appreciate the offer but no need. I'll be ordering this straight away!
I've gone with the ProClip mount since the beginning, I can vouch for the quality as well.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Hi,
I do not think it will work with the Note 2, see below for the email I received from ProClip, apparently the Note 2 is too wide for the adjustable holder.
-------------------
Hi Alan,
All our adjustable holders don’t open wide enough to accommodate the Galaxy Note II with a case. This device is just too wide for us.
Best Regards,
Customer Service
ProClip USA, Inc.
Just ordered mine this morning. I was using their GSIII mount and it works great. I don't use a case and had the holder with built in charger.
It slides in and out easily and I prefer the phone to be upright.
My car has a nice flat area where I was able to use some heavy duty 3m dual lock velcro to mount the holder to the dash without using their clip. That sucker was not moving.
Now let's see how long before it ships. I had to wait a few weeks before the GSIII one shipped even though it did not say backordered on the site.
very tempted to buy this:
http://www.proclipusa.com/?sectionp...77&have_holder=&have_mount=&p_pageid=1&dtype=
However it lists that it will not work with a case on the device! Does anyone have this yet? The only case I'd probably put on would be a very thin TPU or the official samsung flip.
aw000002 said:
Hi,
I do not think it will work with the Note 2, see below for the email I received from ProClip, apparently the Note 2 is too wide for the adjustable holder.
-------------------
Hi Alan,
All our adjustable holders don’t open wide enough to accommodate the Galaxy Note II with a case. This device is just too wide for us.
Best Regards,
Customer Service
ProClip USA, Inc.
Click to expand...
Click to collapse
Right, customer support told me the same. However, Evo4G63 said it worked well for him using the Note 1 with a case, no reason why it shouldn't work for the Note 2....I guess we'll soon find out
Sent from my SGH-T889 using Tapatalk 2
+1 for the adjustable ProClip cradle # 875214. High quality item. Since it's adjustable, I've been able to use with all my devices for the past 5 years, up to and including my Note 2! It doesn't fit 100% snugly, resulting in a little flop when pressing on the home button. Not a deal-breaker for me though, and still very usable.
Pandemoniumone said:
Right, customer support told me the same. However, Evo4G63 said it worked well for him using the Note 1 with a case, no reason why it shouldn't work for the Note 2....I guess we'll soon find out
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
My Note II just came in today so I will be taking pics of it with both my Note and Note II. I'll update this post with pics later tonight.
Update:
I snapped a few pics.
Here's just the mount and holder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's the mount with my Note 1 + TPU case
Here's the mount with my Note 2 without case
The mount wasn't adjusted at its peak width either, so it can probably fit with a larger case.
I hope this cleared some of the confusion. Despite what the employees at ProClip said, I have tried this mount with both my Notes and they definitely fit, the mount even has some room to adjust wider.
My Note II holder shipped today. Will post pics when it arrives
Sent from my SPH-L900 using xda premium
Evo 4G63 said:
My Note II just came in today so I will be taking pics of it with both my Note and Note II. I'll update this post with pics later tonight.
Update:
I snapped a few pics.
Here's just the mount and holder
Here's the mount with my Note 1 + TPU case
Here's the mount with my Note 2 without case
The mount wasn't adjusted at its peak width either, so it can probably fit with a larger case.
I hope this cleared some of the confusion. Despite what the employees at ProClip said, I have tried this mount with both my Notes and they definitely fit, the mount even has some room to adjust wider.
Click to expand...
Click to collapse
Thanks for the pics! Do you experience any movement when pressing the home button?
Mine came yesterday, here it is, installed. I'm using the male/female clip, so I can move it to my Ranger, where I already have a ProClip vent mount.
This is perfect for navigation, it slides in easily and connects securely. I do have the swivel version, but it won't do landscape - but that's ok for me, I prefer portrait for navigation (I'm an old Garmin iQue 3600 user, so portrait is what I'm used to. North up )
reinbeau said:
Mine came yesterday, here it is, installed. I'm using the male/female clip, so I can move it to my Ranger, where I already have a ProClip vent mount.
This is perfect for navigation, it slides in easily and connects securely. I do have the swivel version, but it won't do landscape - but that's ok for me, I prefer portrait for navigation (I'm an old Garmin iQue 3600 user, so portrait is what I'm used to. North up )
Click to expand...
Click to collapse
Actually looks VERY nice surprisingly, I would not need this of course at the moment because I have a built in GPS, but it is a create cradle and it definitely looks very clean in the Camry
I might invest in one of these just to have it facing me rather than laying in my cup holder while charging, but still....thanks for the post
Edit...
By the way, which one did you buy, can you please post a link to that exact one?
Evo 4G63 said:
My Note II just came in today so I will be taking pics of it with both my Note and Note II. I'll update this post with pics later tonight.
Update:
I snapped a few pics.
Here's just the mount and holder
Here's the mount with my Note 1 + TPU case
Here's the mount with my Note 2 without case
The mount wasn't adjusted at its peak width either, so it can probably fit with a larger case.
I hope this cleared some of the confusion. Despite what the employees at ProClip said, I have tried this mount with both my Notes and they definitely fit, the mount even has some room to adjust wider.
Click to expand...
Click to collapse
Hey do you think it will fit with an Otterbox Defender case (when it comes out)? as much as I do not need one of these, I am actually thinking of buying one. Especially after seeing your pictures and the other pictures below. Please advise
Joe333x said:
Thanks for the pics! Do you experience any movement when pressing the home button?
Click to expand...
Click to collapse
It does move because the phone is a lot slimmer than the crevices since the holder was designed to fit devices with cases or large devices, but with a rubbery grippy TBU or so case, it doesn't move nearly as much. If you are talking about the tilting and swiveling, the pressure used to press the home button shouldn't have an effect on it.
elite-fusion said:
Hey do you think it will fit with an Otterbox Defender case (when it comes out)? as much as I do not need one of these, I am actually thinking of buying one. Especially after seeing your pictures and the other pictures below. Please advise
Click to expand...
Click to collapse
I had the Trident Kraken case on my Note 1 before, and it didn't fit. Then again, the Trident Kraken I think is bigger than the Otter Box Defender and the Note 1 is wider than the Note II.
I don't think it will fit with the Note II Otter Box Defender since the holder was adjusted almost at its maximum width for my Note II with the official Samsung TPU case, but there is a wee bit of space to be spared. I guess it would depend on how much wider the Defender is than the official Samsung case. I don't think the thickness would be an issue though. When the Defender does come out, I can head over to a store with my mount and try to fit one.
This mount would work pretty well with any normal non ruggedized case though.
Evo 4G63 said:
It does move because the phone is a lot slimmer than the crevices since the holder was designed to fit devices with cases or large devices, but with a rubbery grippy TBU or so case, it doesn't move nearly as much. If you are talking about the tilting and swiveling, the pressure used to press the home button shouldn't have an effect on it.
I had the Trident Kraken case on my Note 1 before, and it didn't fit. Then again, the Trident Kraken I think is bigger than the Otter Box Defender and the Note 1 is wider than the Note II.
I don't think it will fit with the Note II Otter Box Defender since the holder was adjusted almost at its maximum width for my Note II with the official Samsung TPU case, but there is a wee bit of space to be spared. I guess it would depend on how much wider the Defender is than the official Samsung case. I don't think the thickness would be an issue though. When the Defender does come out, I can head over to a store with my mount and try to fit one.
This mount would work pretty well with any normal non ruggedized case though.
Click to expand...
Click to collapse
Great Thanks for the insight I looked up the different ones on their site, and I actually want to get the one that comes with the charger, but I feel like im SOL with that because it wont fit with a case on it, so i dont know what to do
xak944 said:
+1 for the adjustable ProClip cradle # 875214. High quality item. Since it's adjustable, I've been able to use with all my devices for the past 5 years, up to and including my Note 2! It doesn't fit 100% snugly, resulting in a little flop when pressing on the home button. Not a deal-breaker for me though, and still very usable.
Click to expand...
Click to collapse
I also have the 875214 which I ordered for my Galaxy S3 a month or so ago. The S3 with a Seidio Surface case fit "ok" but it does rock back and forth a little bit as you mentioned. Still perfectly usable though. Called ProClip and they are aware of the issue and have a new version coming shortly that works better with the S3. That was a few weeks ago but they said the would contact me the minute the new model was available and arrange for a swap.
I've since purchased the Note 2 (love it!) and have adjusted the holder to fit the Note 2. Works perfectly as you mentioned and again rocks just a little bit same as the GS3. I don't have a case on my Note 2 yet (Seidio Surface is on the way) so I'm hoping that will snug it up a little further. I suspect the revised GS3 version will also work better with the Note 2.
I am also looking at ProClip's dedicated Note 2 holders but website mentions that they will not work with a case installed so non-starter for me. I am curious though if anyone has ordered one of the Note 2 specific cases and has been able to make it work with a slim case installed. Is there any flex at all in the holder that would allow the case to fit as well? I would order the hard wired version of the holder in a heart beat if someone can confirm a slim case will fit it. Surprised ProClip hasn't released an adjustable version with MicroUSB port for the Note 2 but maybe that's in the works.
And have to agree with others here. ProClip mounts are pricy but well made and worth every cent. I've owned 4 of them already over the years for various phones. I've never used their vehicle mounts though. All my cars have been able to use the Panavise custom mounts which I also highly recommend. ProClip holders fit on them perfectly as they use standard AMPS bolt patterns. Cheers!
(sorry, tried to post link to panavise brackets but not allowed yet. Just google "panavise indash custom mount' and you'll find it. Selection is more limited than Proclip but if they have one for your car it's usually a nicer solution combined with the ProClip holder)
Related
I just got this car mount since the car mount I have can't accept anything bigger than an Epic 4g touch. I mounted it at work and then went ahead and mount it on my less than smooth dash. I wanted something that will grab the dash yet I don't want a permanent mount. It works as advertised and will stick to textured dash. There are two adjustments, one for the neck and the other one for how you want to orient the note 2. With that rugged case I have, it barely fits but it does offer good grip.
I left it in the sun on the dashboard for the next 3 hours and want to see if it still sticks to the dash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice looking mount, and thanks for sharing... Could you provide us with a link from the place you purchased the mount from.
Thanks...
Amazon $20.
I have the one meant for tablets (specifially states use for galaxy note, ipads etc)
Works well.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Red case ?
Hi,
Just a quick question : what is the brand of your red case ? I llike it !
Hav a link ?
Thx a lot.
Cheers,
how is the hold man?
looks pretty tough though
frezd said:
Hi,
Just a quick question : what is the brand of your red case ? I llike it !
Hav a link ?
Thx a lot.
Cheers,
Click to expand...
Click to collapse
See the $11 EBAY ruggedized case review for link. That case is pretty much permanent. Once you put it on, you will get a hernia trying to remove it. It is child proof and adult proof .
Okay, update: 24 hours and it is still holding on to the dashboard. Most dashboard are not flat and smooth like the car windshield. This car mount actually works as advertised. It grips textured dash surface without the need to glue a mounting plate to your dash. The grip material is sticky and if you clean the surface well before putting it on, it should stay put. It is not permanent but I am leaving mine there knowing that I can remove it without damaging the dashboard.
I highly recommend this case for $20 since it will also accommodate other phone also.:good:
I bought this exact car mount from Amazon. Works very well for $20! I have the Samsung OEM TPU case on it right now and used it yesterday for Navigation and it worked super!
Got mine on Wednesday and really digging it. I have it mounted on my windshield in landscape and has held the phone nice and secure even when three wheeling it on the on-ramps for the interstate.
Easy in. Easy out. Complete access to the charging port and headphone jack. The menu and back buttons are slightly covered by the hooks but they are still usable. The hooks slide left and right but haven't had the need to move them.
Perfect for my needs. I'm using the Reingke Slim case with plenty of room to spare.
Sent from my GT-N7100 using xda premium
Thanks for the post...i will be buying one.
I got this mount for the Galaxy Note 1 about a year ago. Looks like it's the same exact model for the Note 2. I love it! Stuck veryyy well to my dash even though it's curved and textured. Has been in the Vegas sun for a year and still feels permanently on there.
Also, it's very easy to put the phone in and out with one hand and has a good grip!
Does it work with a case?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Yes sir as long as it's not to fat
Sent from my GT-N7100 using xda premium
iOttie Easy One Touch Car Mount Holder for Galaxy Note 2 | Model No: HLCRIO101
Hi.
Everywhere I have looked that sells this item (Model No: HLCRIO101) and not the smaller one (Model No: HLCRIO102), they tell that this mount holds devices up to 3.5 inches wide. But what is the minimum size? Can someone who has this mount, measure what is the minimum size for a phone to be held securely.
Thanks!
petzku said:
Hi.
Everywhere I have looked that sells this item (Model No: HLCRIO101) and not the smaller one (Model No: HLCRIO102), they tell that this mount holds devices up to 3.5 inches wide. But what is the minimum size? Can someone who has this mount, measure what is the minimum size for a phone to be held securely.
Thanks!
Click to expand...
Click to collapse
I measured it for you and 2.5 inches is the absolute minimum for a secure hold. The spacing between the two arms is a little less than 2.5 inches but the foam is soft so 2.5 inches is the minimum for a good grip. It fits the Epic 4GT just fine and that phone with the case on is 2.75 inches.
Thanks man! Just the thing i wanted to hear. My sgs3 plus uag cover is almost 2,9 inches wide. So this mount would be perfect for me as the 3 inches wide smaller version wouldnt.
petzku said:
Thanks man! Just the thing i wanted to hear. My sgs3 plus uag cover is almost 2,9 inches wide. So this mount would be perfect for me as the 3 inches wide smaller version wouldnt.
Click to expand...
Click to collapse
My only concern is the power button and volume on the S3. I don't know if the two arms will cover those buttons. It does not with the Note 2. Give me a height from the bottom of the phone to the power and volume button. Power is on right and volume is on left on the S3?
aquaholik said:
My only concern is the power button and volume on the S3. I don't know if the two arms will cover those buttons. It does not with the Note 2. Give me a height from the bottom of the phone to the power and volume button. Power is on right and volume is on left on the S3?
Click to expand...
Click to collapse
The volume-down on the left is about 3 inches and the power-button on the right is about 3,6 inches from the bottom.. I understand that the bottom arms are adjustable?
petzku said:
The volume-down on the left is about 3 inches and the power-button on the right is about 3,6 inches from the bottom.. I understand that the bottom arms are adjustable?
Click to expand...
Click to collapse
You are OK on the power but sounds like the volume is a little low at 3 inches. I just measured my Note 2 and volume and power is 3.75 from bottom.
Yes the bottom arms are adjustable.
I remembered reading a review on Amazon and that the volume on the S3 is covered by the side arm.
I just went to my car and measured it. The left arm will definitely cover your volume button if it is 3-3.5 inches from the bottom.
Here is the amazon review:
" Amazon Verified Purchase(What's this?)
This review is from: iOttie One-Touch windshield and dashboard car mount for Galaxy Note 2 (Wireless Phone Accessory)
I got this because it specifically mentioned compatibility with my new Galaxy S3. I would love to be able to keep it but the side bars are directly over the power and volume toggles so every time I put the phone it it turns my audio all the down. I will be returning it and can't recommend it for anyone who has a Galaxy S3
UPDATE: I received a call from iOttie the same day I placed my original one star review. I discussed my issue with the design and the product being sold for the S3. They not only sent me a new mount which worked with my phone they took the Galaxy S3 off the product description. I can only hope that a company as responsive and capable as this experiences tremendous success. My ne mount works great. It is well constructed, well designed and sticks to my dashboard like it is welded to it. "
So no, this will not double up as the perfect car mount for the Note 2 and S3. Smaller one works with S3 but not Note 2.
just ordered a couple for my brother and I, can't wait to get it
can anyone confirm if it will fit the iphone 5, i noticed the guy above said minimum width is 2.5"
Hey guys. Ive looked and there are a few threads but nothing seems conclusive as to what is the best choice for a car mount that will fit the note 2 and also work with the s3.
I want a strong suction and something that will hold the phones steady for use as a gps buy not block the screen and must allow for the car charger to be plugged in to the phone.
Need two so preferably something that won't break the bank.
Thanks.
Sent from my SPH-L900 using xda premium
http://www.shoppingsquare.com.au/p_..._Holder_for_Smart_Phones_PDA_GPS_Mobile_Phone
ive got one of these. it opens wide enough to hold my note 2 with my chunky heavy duty case. enough suction force to not wobble either. but only really seems to work on windscreens. wont work on the faux leather dash in my honda civic, but will work on plastic dashes.
I went with the iBolt xProDock for my Note 2. It fits the GS3 as well and works with cases. http://forum.xda-developers.com/showthread.php?t=1910428 or http://amzn.com/B00AOCSFYC
I love it. It is super easy to insert/remove the phone and it holds it very solidly. I've had it a month and I only suctioned it one time. It shows no signs of weakening. I think the price is definitely worth it.
supyo said:
I went with the iBolt xProDock for my Note 2. It fits the GS3 as well and works with cases. http://forum.xda-developers.com/showthread.php?t=1910428 or http://amzn.com/B00AOCSFYC
I love it. It is super easy to insert/remove the phone and it holds it very solidly. I've had it a month and I only suctioned it one time. It shows no signs of weakening. I think the price is definitely worth it.
Click to expand...
Click to collapse
seems awfully expensive for something with 3.5/5 rating. I think I prefer the clip posted above. i'm going to try to find it locally if not i'll order online.
if there's anything else that would be better please suggest it!
Got the mountek cd slot holder. Couldn't be happier. Doesn't block the road and looks almost like a 2din receiver. Oh super stable too. My old suction one would shake so much and it would be hard to reach while driving
I use the official Samsung Galaxy Universal Suction Car Mount Kit for Samsung Galaxy Phones available from Amazon US. I paid £22 for it delivered to the UK. Very solid, works well with my Galaxy Nexus, S2 and iPhone. Reviews suggest it does work with the Note 2 as well.
You will need to purchase a car charger though, but cannot fault it at all.
Souai said:
http://www.shoppingsquare.com.au/p_..._Holder_for_Smart_Phones_PDA_GPS_Mobile_Phone
ive got one of these. it opens wide enough to hold my note 2 with my chunky heavy duty case. enough suction force to not wobble either. but only really seems to work on windscreens. wont work on the faux leather dash in my honda civic, but will work on plastic dashes.
Click to expand...
Click to collapse
I got the same car mount and reviewed it here with pictures:
http://forum.xda-developers.com/showpost.php?p=37487154&postcount=49
The only difference, it was from ebay shipped for only $3.95. Took a little over a week to get here, and it's a fantastic car mount that will hold any phone.
Exomount 2!
I own a few of the Exomounts and one of their newest, the Exomount 2. It is easily the best I have tried as far as a universal type mount.
http://www.arkon.com/Galaxy S III/megagrip-galaxy-s-3-sticky-dash-mount.html
My girlfriend uses this in her 2011 Scion with her GS3. It will also fit the Note 2 with most cases. If you have a giant Otterbox case, it'll be a tight fit. I like this mount because it sticks to the dash and can be adjusted to be around the level of an air vent mount. You can adjust it to different heights and even use it on the windshield.
Her Scion has a textured dash and it hasn't come off in 3 months. Good mount, imo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks for the link. I guess I should have updated the post to mention I already ordered mine.
ended up going with a clip style holder, I like the design more and I want to use the phones horizontally, which the clip seemed to be sturdier at holding than this kind of mount.
let's hope its good!
Max_Pain said:
thanks for the link. I guess I should have updated the post to mention I already ordered mine.
ended up going with a clip style holder, I like the design more and I want to use the phones horizontally, which the clip seemed to be sturdier at holding than this kind of mount.
let's hope its good!
Click to expand...
Click to collapse
Since N2 has a big screen, I like to mount it in portrait mode more than landscape for GPS navigation. It lets me look more further ahead.
Sent from my SGH-T889 using xda app-developers app
Shady Gambino said:
http://www.arkon.com/Galaxy S III/megagrip-galaxy-s-3-sticky-dash-mount.html
My girlfriend uses this in her 2011 Scion with her GS3. It will also fit the Note 2 with most cases. If you have a giant Otterbox case, it'll be a tight fit. I like this mount because it sticks to the dash and can be adjusted to be around the level of an air vent mount. You can adjust it to different heights and even use it on the windshield.
Her Scion has a textured dash and it hasn't come off in 3 months. Good mount, imo.
Click to expand...
Click to collapse
Arkon makes some of the most durable car mounts! I have this Megagrip since 2.5 years using it with Droid X and now Note 2. What I'm very excited about is their upcoming Slim-Grip Ultra mount that can fit anything from Note 2 to Nexus 7. I talked to Arkon customer support and they mentioned it will be available in a few weeks. Once I get it - will review it here!
The best ones are from ibolt..... check its Web Page. .. !!
http://www.ibolt.co/ibxs-33603
Sent from my SGH-T889V using xda app-developers app
Personally I the Breffo Spiderpod, I know its not a car mount but works a treat. just shape it to what you want. Mine uses the vents to hang on, been using it for 2 months now. My Note 2 has never come out, and I just slid it in and out even fits a treat with my flipcover.
http://www.amazon.co.uk/Breffo-Spid...19K4/ref=sr_1_1?ie=UTF8&qid=1360079702&sr=8-1
The Samsung i9300 official one works perfectly for me - fits my Note 2 with case, and is also sold as S3 compatible (and in fact I've tried mine with an S3 and works fine). Solid, has never fallen off my windscreen, and I'm just converting it at the moment to have a fixed power plug I can slot the phone on to, though that's probably not an option if you want to use the 2 phones with it.
I second the IBolt for Note2. I have been waiting for it to be released for months now and it is finally out. Although you have to wait for the charging cable until March.
It is built very very well, mounts to windshield, dashboard and has an optional permanent mount bracket also. My favorite part is the phone goes into Dock mode once attached. I have this mount for the GS3 and it is amaizing. Before purchasing it for the S3 i went through three seperate mounts from Best buy, returned them all. None of them came even remotely close to the quality of the IBolt mount.
sshafranko said:
I second the IBolt for Note2. I have been waiting for it to be released for months now and it is finally out. Although you have to wait for the charging cable until March.
It is built very very well, mounts to windshield, dashboard and has an optional permanent mount bracket also. My favorite part is the phone goes into Dock mode once attached. I have this mount for the GS3 and it is amaizing. Before purchasing it for the S3 i went through three seperate mounts from Best buy, returned them all. None of them came even remotely close to the quality of the IBolt mount.
Click to expand...
Click to collapse
I was following this dock right up to the point where they said you had to connect the power cable yourself. I wanted a mount that I could slide the phone in onto a power connector, for one-handed operation. I'm now making my own
ChrisEmerson said:
I was following this dock right up to the point where they said you had to connect the power cable yourself. I wanted a mount that I could slide the phone in onto a power connector, for one-handed operation. I'm now making my own
Click to expand...
Click to collapse
I get what your saying, but i usually dock my phone when i get into my truck connect it and it stays there until i get out. I don't see any reason for plugging and unplugging it while driving unless i'm missing something?
sshafranko said:
I get what your saying, but i usually dock my phone when i get into my truck connect it and it stays there until i get out. I don't see any reason for plugging and unplugging it while driving unless i'm missing something?
Click to expand...
Click to collapse
Me too, it's just the ease of doing this that I want. Slide in, slide out, no fumbling around for cables and getting the orientation and angle right and pushing it in properly... Much rather have a 1 handed operation that I can get in the car, place the phone in its dock, bring the sides in to grip it (easily all done with 1 hand), and have it activate car mode and start charging from the car at the same time. Equally, to get it out I just press a button on the back to release the grip, and pull the phone up - still all easily done with one hand. It's how I've had every other car dock as well. Sometimes when I get in the car I forget to put my phone in the dock, so it becomes even tricker - this makes it very easy.
Anyway, each to their own. I'll probably start a thread about the one I'm making at some point so other people can do the same thing if they want.
ChrisEmerson said:
Anyway, each to their own. I'll probably start a thread about the one I'm making at some point so other people can do the same thing if they want.
Click to expand...
Click to collapse
I'm interested in your project. I was ruined by the excellent car dock that Motorola made for the Atrix. It was perfect.
Yes.....so....my car dock is broken....can't stick to anything anymore.
I need a really good one (like someone doesn't want a really good one) duh. ...anyway
I love the flexible arm option....anyway nd need a big suction cup. The one(s) I had were 'too small' and couldn't get enough surface area for a good "stay". I looked all over amazon ...and ironically no good write up if not any that have options as I mentioned. Anyone have anything out there like above mentioned?..I really need the flex bc I different vehicles I use.
Thanks
N3bula4.3
w/Philzs
ganggreen777 said:
Yes.....so....my car dock is broken....can't stick to anything anymore.
I need a really good one (like someone doesn't want a really good one) duh. ...anyway
I love the flexible arm option....anyway really need a big suction cup. The one(s) I had were 'too small' and couldn't get enough surface area for a good "stay". I looked all over amazon ...and ironically no good write up if not any that have options as I mentioned. Anyone have anything out there like above mentioned?..I really need the flex bc I different vehicles I use.
Thanks
N3bula4.3
w/Philzs
Click to expand...
Click to collapse
N3bula4.3
w/Philzs
Car Dock
How much does a car dock cost?
http://forum.xda-developers.com/showthread.php?t=2192333 - scroll down to Mounts/Stands/Grips section of my reviews (I know, there is a ton in there ). Pretty much, I reviewed almost every single car mount available on the market. What I can HIGHLY recommend is Slim Grip Ultra by Arkon. The quality of their mounts and sticky gel suction cups is bar none. Been using it for years. Plus what I like about Slim Grip Ultra is that you can use it either with a phone or 7"/8" tablet. And it fits with any case, even Defender. Plus, when you go to their website, for every mount you get something like a dozen of different mounting arm options. Typically, all their mounts are around $20-$25 (on amazon it's cheaper), and come with 2 year warranty.
I will sooo definitely take a looong read lol
Lots of good stuff....thanks Bra
N3bula4.3
w/Philzs
vectron said:
http://forum.xda-developers.com/showthread.php?t=2192333 - scroll down to Mounts/Stands/Grips section of my reviews (I know, there is a ton in there ). Pretty much, I reviewed almost every single car mount available on the market. What I can HIGHLY recommend is Slim Grip Ultra by Arkon. The quality of their mounts and sticky gel suction cups is bar none. Been using it for years. Plus what I like about Slim Grip Ultra is that you can use it either with a phone or 7"/8" tablet. And it fits with any case, even Defender. Plus, when you go to their website, for every mount you get something like a dozen of different mounting arm options. Typically, all their mounts are around $20-$25 (on amazon it's cheaper), and come with 2 year warranty.
Click to expand...
Click to collapse
Thanks for this link. I always find it hard to get what I want out of the search bar.
I'm using a RAM Mount setup for my Note 2. Phablet X-Grip, RAM-B-201-C Long arm and twist-grip suction cup.
Not the cheapest option out there, but it works great, is solid and can be moved from one vehicle to another relatively easily. I'll try to take photos when I get the chance.
I've been using the iOttie that is windshild mount. I stick mine to the dash. Very similar the Anker recommended above. Been working well for me for over a year. I use mine every day. I don't switch cars very often, but I haven't had issues. I just kept the little plastic cup cover when transporting or putting away to keep the sticky area of the cup clean.
I will say, it's kind of pain to get the mount off the dash because it sticks very well.
lovekeiiy said:
I've been using the iOttie that is windshild mount. I stick mine to the dash. Very similar the Anker recommended above. Been working well for me for over a year. I use mine every day. I don't switch cars very often, but I haven't had issues. I just kept the little plastic cup cover when transporting or putting away to keep the sticky area of the cup clean.
I will say, it's kind of pain to get the mount off the dash because it sticks very well.
Click to expand...
Click to collapse
Arkon, not Anker I make this mistake as well since I review so many different products, including a lot from both Anker and Arkon lol!!!
iOttie is not bad, but I found a problem using it with rugged cases. Something like Defender or Zerolemon Zeroshock with ZL battery not going to fit well because iOttie grip arms are short. Plus, Arkon slim-grip ultra can also fit my Nexus 7 (or Note 8 or iPad Mini) so it makes it a better value for the same or cheaper price (depending on amazon sales).
vectron said:
Arkon, not Anker I make this mistake as well since I review so many different products, including a lot from both Anker and Arkon lol!!!
iOttie is not bad, but I found a problem using it with rugged cases. Something like Defender or Zerolemon Zeroshock with ZL battery not going to fit well because iOttie grip arms are short. Plus, Arkon slim-grip ultra can also fit my Nexus 7 (or Note 8 or iPad Mini) so it makes it a better value for the same or cheaper price (depending on amazon sales).
Click to expand...
Click to collapse
Opps, I didn't even realize I wrote the wrong company name. I believe I have products from both companies too. I have one of Anker's 10A external batteries, and, I believe, my dash tablet holder/mount is from Arkon.
I knew the iOttie had limitations. I just didn't remember them all. Then again, the issues you mentioned, especially in regards to cases like Defender, and extended batteries is very common. It's part of the cost of getting a thick case or big battery.
I wouldn't dispute the value of the Arkon. I especially like the idea of the various mounting brackets. Although, from what it looked like, they're all separate units, running about $20 to #40 a piece, which could end up being very expensive. More useful if the cost was, say, halved and just get the mounting bracket and can just use one cradle with any bracket. I think this could a good deal for the person who travels a lot and may need or want various ways to mount their mobile device.
As for the iOttie itself, it's worked well for me. Granted, I only use the normal OEM battery, and have a cheap Cruzerlite case on my phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Although now it has a yellowing to some degree. Anyway, what I like is that the cup and it's additional stickiness works on my dash board. The dash although not extremely curved, is curved just enough that unless it's small cup, can't maintain or establish suction. Plus, I prefer not use the windshield if I don't have to; plus, California law actual prohibits it as well. I don't want to use the airvent. And I want something mostly secure, so those weighted friction dash mount pads, didn't fit the bill. I'm concern if I get an accident or something it flying around. I also liked it had a small arm. Adjustable a different parts of bracket. The ball is actually doing well in keeping position. I've had other mounts that after a year couldn't keep a hold, and ultimately ended having to rest the holder on the dash. I just couldn't fasten the holding nut any tighter. The push button fastener is a nice bonus touch to it as well. Just pop the phone in, the holding bracket on the faster cling the device. The release button opens up a releases the device.
I'm not quite as sold on the Arkon's value in regards to being able to hold larger devices. Not so much whether it can, but more how many people have that need. Given how some smart phones are getting bigger, I do see it as a valid argument. How many of use end up getting new mounting devices every time we get a new mobile device. Yet, I don't see a lot of people having a phablet and small tablet. Personally, since I wanted to get phablet, since the first Dell streak was released (Sprint didn't offer a phablet till the Note 2 and I didn't want to switch carriers), I just did not see significant benefit of a 7" tablet over a phone that was almost 6" in size. I got a 10" tablet instead which does give a different experience beyond the user interface between the devices. Granted this last bit is really a subjective matter and I do think Nexus 7 and other such tablets give an excellent value and experience, and are overall very good devices.
On a side note, for me, I think a more ideal car mount would be something similar to a Clingo but with suction cup of the iOttie or Akron. I have a clingo neklit I use with a Gameklip and the first generation pivot pad, which both use similar sticky pads. They work really well and even better with a nonTPU surface. When it starts losing stickiness, I just rinse it off under cold water and rub it thoroughly with my finger and let drive. And best part, the device limitation is about the device's weight, not it's dimensions. Plus, their commercials can be a bit funny
I have used the PivotPad with my 10" tablet. It worked, but the weight and size compared the PivotPad's sticky pad were ideal. It was easy to knock off. It does work well with GN2.
I recommend Tetrax. You only need a magnet.
Enviado desde mi GT-N7100 mediante Tapatalk
Hello!
So I am searching for the perfect car holder for dashboard for the HTC M8.
The official one is very expensive and of course it will be limited for M8 only (no future phone)
So I have found 3 interesting models online all universal and one handed usable:
Anyone tried one of these?
Kit Universal car support
http://www.amazon.co.uk/Kit-Anywhere-Multisurface-Suction-Smartphones/dp/B004DUMBX2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Osomount Push:
http://www.amazon.co.uk/OSOMount-Universal-Mobile-Holder-Enabled/dp/B00JXNJJKC/ref=sr_1_3?s=electronics&ie=UTF8&qid=1399630365&sr=1-3&keywords=osomount+touch
Exogear Touch:
http://www.exogear.com/products-exomount-touch-one-touch-car-mount-holder.html
I bought this originally for my nexus 5 last year and will continue to use it with my m8. Works great very low profile so it's non-obtrusive.
http://www.amazon.com/gp/aw/d/B00I58VAZS/ref=mp_s_a_1_7?qid=1399705722&sr=8-7&pi=AC_SX110_SY165_QL70
Sent from my HTC One_M8 using XDA Premium 4 mobile app
I'm about to try this one: http://www.amazon.com/Clingo-Univer...ie=UTF8&qid=1399708629&sr=8-5&keywords=Clingo
Just waiting for delivery.
Tip: The Brodit passive Car Mount for SGS3 fits also the M8.
Anyone have any other good car mounts they've used with the M8, preferably with a case? That doesn't obstruct the cameras?
The Clingo has poor reviews, they all say after a couple months the green sticky stuff comes off on everything
I've tried 2 previous versions of "EXOMounts" and both had horrible suction, couldn't hold my EVO 4G lte caseless. Weights far less than the M8.
The OSOMount isn't even released yet, not willing to be another guinea pig.
The KitAnywhere looks sketchy at best, its holding an iPhone and doesnt appear it has much more give.
The Arkon looks ok, and is slim, but will it hold the weight of the M8, and not let it go when driving over bumpy surfaces? Will be driving a large box truck soon and need to make sure it can take a shakin and not drop my precious
The Arkon has really good reviews, just would like a hands on opinion from someone with a M8.
Thanks in advance!
I just ordered a Mountek. I had been considering getting one of these for quite a while. I really like being able to attach it inside of your cd slot. Just a note though... they have two versions, a clamp down version and a magnetic one. My first thought was to get the magnetic one since our phone is metal, duh =P. But aluminum is not magnetic, and since I prefer a clear case for my phone, the metal plate would look pretty horrible inside of it. So, if you are using a case that is not clear, I would suggest getting the magnetic one, otherwise get the clamp version. There are plenty of other types of mounts though. But for my particular car, a dash or window mount would be up a bit too high for my taste.
If interested, I can post some pics of the mountek with the M8 once it gets here.
I'm using the 'classic' Mountek nGroove Grip, and it's perfect. You have to remove the bottom legs to get access to the headphones jack and the microUSB port, but the grip is strong enough to hold the phone even without it.
What I like about it is that it keeps the phone close to me and facing directly at me (as opposed to farther under the windshield where you have to lean down to use it or stretch) - and also it doesn't obstruct your view - it's perfect, really.
If you don't wanna give up your CD slot it also fits into just creases in your dashboard.
Highly recommended!
I'm definitely interested in seeing pictures of the Mountek mount and hear about opinions, if the M8 can be mounted in landscape mode and if it keeps the phone stable while driving. Appreciate it!
Sent from my HTC One M8
Traceamount said:
Anyone have any other good car mounts they've used with the M8, preferably with a case? That doesn't obstruct the cameras?
The Clingo has poor reviews, they all say after a couple months the green sticky stuff comes off on everything
I've tried 2 previous versions of "EXOMounts" and both had horrible suction, couldn't hold my EVO 4G lte caseless. Weights far less than the M8.
The OSOMount isn't even released yet, not willing to be another guinea pig.
The KitAnywhere looks sketchy at best, its holding an iPhone and doesnt appear it has much more give.
The Arkon looks ok, and is slim, but will it hold the weight of the M8, and not let it go when driving over bumpy surfaces? Will be driving a large box truck soon and need to make sure it can take a shakin and not drop my precious
The Arkon has really good reviews, just would like a hands on opinion from someone with a M8.
Thanks in advance!
Click to expand...
Click to collapse
I have actually this holder http://www.maisondugsm.com/a/produit/produit/1852246/support_auto_avec_ventouse_pama_windscreen_couleur_noir_pour_htc_one_m8.html but one of the side doesn't have rubber or soft plastic so it will scratch my M8 with time so it need both hand to put the phone and pull it without scratching it.
About the Exomount suction, I am planning to stick it to my actual disk pad which has double sided 3M sticky paste to stuck on my dashboard,it's the red thingy on the picture.
Though I wonder if its worth 45$ with delivery charges...
Edit: I have found a tailored made holder for the M8 though I wonder if it won't scratch the phone borders as it doesn't look rubberized where it ''clips'' and it will definitely need the disk pad too for the dashboard mount.
http://www.amazon.es/Celicious-Exclusivo-Ajustable-cualquier-Orientaci%C3%B3n/dp/B00K2E55AE/ref=sr_1_1?s=electronics&ie=UTF8&qid=1399885918&sr=1-1&keywords=htc+m8+soporte+coche
I use both the Tetrax Ego and Fix in my car - Ego for summer when I want the phone mounted over an air vent to keep the battery cool (LONG drive from the South to Upstate NY using GPS and/or playing music) and the Fix for winter/daily driving.
No, you won't be able to use the camera while it's mounted (due to the dash being in the way) but it holds my devices rock solid. I've never had it fall off, even with a charging cable plugged into it. I started using it with my Incredible, and used it with the Thunderbolt, the ReZound, the M7, and now my M8. The M7 and M8 I use/d caseless (though I have a skin on the M8, don't want to scratch this beauty) and it holds perfectly. It does require adhering a small button on the back of the device, but this also has helped keep the camera from getting scratched when I lay it on it's back on a table.
The M8 with a case on it might need the XWay or the FixWay (made for larger devices, they have stabilizing rubber "feet" in an X pattern radiating out from the magnetic piece.)
Really can't recommend these enough.They hold perfectly, and are VERY unobtrusive when not in use.
hx3 said:
I'm definitely interested in seeing pictures of the Mountek mount and hear about opinions, if the M8 can be mounted in landscape mode and if it keeps the phone stable while driving. Appreciate it!
Sent from my HTC One M8
Click to expand...
Click to collapse
Sorry, don't have pictures of the holder with the device in it.
I'll just note that the holder is adjustable, you can place it either this way or upside down (it swivels 360 degrees), and the grip is adjustable and strong (I actually got my Nexus 7 to fit in it!)
It can easily be turned aside to landscape, and is VERY stable (you can adjust its rigidness).
I used a Mountek in my old car. The felt lining along the CD slot crumpled up and never looked the same again. Depending on how much that bothers you, you might want to avoid them. I'm thinking of getting a ProClip this time around. It uses a suction cup, which goes on a separate dashboard mount that clips into place somewhere on your dash; where exactly depends on your car and what they've made for it. I read a Honda Accord forum; for that car at least, it's supposedly as stable as can be.
http://www.proclipusa.com/phone-holders/device/htc/one-m8.cmsv
Ok so I must decide between Osomount Quick Grip which looks more solid than the U Grip and the iOttie HERE
My main goal is to have a one handed friendly holder, not bulky and of course not falling
I'm going to order the Arkon, after seeing the review here and the reviews online are all really good. It'll also fit my phone with case, and not block the camera. After some run ins with drunk off duty cops, telling me to get out my car and fight (lol), I like the idea of being able to record out the windshield, or front facing camera without obstruction. Will update with a review after I get it and use it for a few days or so. Thanks for all the reviews / suggestions here
http://www.amazon.com/gp/product/B00I58VAZS/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A11V2MDXFAC9IW
are there any car docks that have the USB built in?
does HTC make anything official for the M8 ?
I went ahead and ordered the Mountek nGroove Snap 2 (http://www.mountek.com/shop/categor...i-use-car-mount-smartphones-and-mini-tablets/).
I drive a 2013 FR-S and suction cups have an incredibly hard time sticking to the surface of the dash. I also like that it doesn't obstruct the view of the windshield and it's much more minimal than their Grip mount. I have two TPU cases, one clear on the back and another all black. Figure I'll just apply the extra magnetic blade to the back of the case I'll use in my car.
Once it arrives, I'll share my impressions along with some pictures.
DroidRootz said:
are there any car docks that have the USB built in?
does HTC make anything official for the M8 ?
Click to expand...
Click to collapse
Yep they have an official one and very pretty but it costs a leg and an arm (above 70$) for a holder you will throw next year when the M9 will be out
I bought this a few years ago for my Sensation and have used it on many phones with and without cases since: http://www.proclipusa.com/phone-hol...ble-holder-with-tilt-swivel-875214-18871.cmsv
I've used it on the Sensation, GS3, Galaxy Nexus, Nexus 4, One (M7) and now the M8. All with and without cases (you just have to adjust it)
Again, it's adjustable and works perfectly with my M8 and my Seidio Surface case. You have to purchase the mount to go with it. It is expensive but you'll never have to buy another car mount again.
Just got my Mountek grip yesterday. Here are some pics with and without the M8. Sorry for the poor quality of the ones with the phone in the mount. They were taken with an S3.
MindfulSheep said:
Just got my Mountek grip yesterday. Here are some pics with and without the M8. Sorry for the poor quality of the ones with the phone in the mount. They were taken with an S3.
Click to expand...
Click to collapse
Nice but won't it press on volume button?
I ordered the iottie because it has a one hand system button and it got a very good rate on amazon 4.6/5 over 202 reviews!! http://www.iottie.com/Product/ProductDetail.aspx?ProductID=1050&ProductType=321
vegetaleb said:
Nice but won't it press on volume button?
Click to expand...
Click to collapse
Nope. Doesn't hit any buttons, but does obstruct some of them. Not really a big deal for me, but might be for others. Obviously it also depends on the car, and where you decide to place it. It doesn't have to be mounted in the cd slot. It can be mounted in other crevices. I'll probably test it out in some other spots and see what I prefer.
I have an iOttie that I use on my note 4 (I am going to return it, to get the nexus 6). However I noticed that the nexus will be too wide for the car mount. Does anyone know a similar mount that will fit this phone?
Not off hand. I wish they would release an official car dock. The one for nexus one and gal nexus were awesome. Nothing released officially for nexus 4 or 5
There's an "iOttie One Touch XL" that holds devices up to 3.5" wide, which should be enough for an N6 plus a case.
I'm planning to get The Air Dock for it.
eksasol said:
I'm planning to get The Air Dock for it.
Click to expand...
Click to collapse
As much as I love wireless charging (and I do I have 5 QI chargers at home I use all the time) it just doesn't work for me in the car. I use GPS and stream music all the time with screen always on. Wireless can't even come close to keeping up to that. I'm sure it will be worse with the N6 screen size too... I am really hoping they release an official car dock this time. Moto seems to be good at doing that so I am hopeful.
bogus83 said:
There's an "iOttie One Touch XL" that holds devices up to 3.5" wide, which should be enough for an N6 plus a case.
Click to expand...
Click to collapse
On iOttie's website FAQs, they list the sizes of each of their mounts. Actually, the One Touch XL only goes up to 3.3", which should be just wide enough for the N6 since it is roughly 3.27" wide. However, it probably wouldn't work if you put a case on it. The only one I can see working if you put a case on it would be the Easy View 2, which has a max width of 3.5".
HOWEVER, I can see another potential issue arising if you want to use a car mount like this. Notice where the buttons are. They are not towards the top of the device like other phones. They are smack dab in the center going down the right side, taking up a good range in the middle of the phone. So you would have to have the mount clamp down on either the top or bottom of the device. I guess we won't know how awkward it would be to use until we have the device in-hand, so we'll see when the phone actually comes out.
Interesting- when I posted that comment there was a graphic on the Amazon listing showing support for up to 3.5. The image is no longer there, so it was likely an error. Too bad.
pseudoSequential said:
I have an iOttie that I use on my note 4 (I am going to return it, to get the nexus 6). However I noticed that the nexus will be too wide for the car mount. Does anyone know a similar mount that will fit this phone?
Click to expand...
Click to collapse
I have the IOttie Easy One Touch XL
MODEL NO: HLCRIO101
It is the best mount I've found to reduce vibration, and super easy to use.
Another iOttie that would work if you need extra distance from your windshield to you, but will vibrate more of course is the iOttie Easy One Touch 2 Universal
MODEL NO: HLCRIO121
Just go with 9to5mac.com ... if they say this one is the best so I won't argue
http://9to5mac.com/2014/11/09/two-o...-by-winnergear/comment-page-1/#comment-224951
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
c4ud4m said:
Just go with 9to5mac.com ... if they say this one is the best so I won't argue
"To be clear, this won’t stay in one place during rapid acceleration and braking"
Click to expand...
Click to collapse
Sounds like a winner! :good:
Click to expand...
Click to collapse
Just found this
I have a Tylt Vu Qi charger for my N4 on my desk at work and I've loved it. I've had it for just about a year now (or has it been 2 I can't remember).
Anyway I ran across this recently and they are advertising it will launch this year. I'm optimistic since Tylt makes such high quality products (from my limited experience)
http://www.tylt.com/vu-car-wireless-charger/
Arioch5 said:
I have a Tylt Vu Qi charger for my N4 on my desk at work and I've loved it. I've had it for just about a year now (or has it been 2 I can't remember).
Anyway I ran across this recently and they are advertising it will launch this year. I'm optimistic since Tylt makes such high quality products (from my limited experience)
http://www.tylt.com/vu-car-wireless-charger/
Click to expand...
Click to collapse
That actually looks like a winner. I'd definitely be interested in purchasing one.
Sent from my GT-N7105 using XDA Premium HD app
I like the magnetic phone mounts. I currently use one from Mountek on my Nexus 5. http://www.mountek.com/shop/
Do you have to use the plate or does it just hold on with the Nexus 5 magnets?
Anything like that but with qi charging?
Thanks
Sent from my Nexus 5 using XDA Free mobile app
I just received this one from Amazon a couple days ago when I was able to get it for $7: http://www.amazon.com/gp/product/B009GSI0MM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1. Will see how it works out. Keep in mind the buttons are almost smack dab in the middle of the right side of the phone, so you have to be mindful where the grippers will squeeze, or it'll push the buttons.
Inspiration! (Mountek nGrove Grip)
rubi76 said:
Do you have to use the plate or does it just hold on with the Nexus 5 magnets?
Anything like that but with qi charging?
Thanks
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I'm using Mountek nGroove Snap2 with my Nexus5. It's great that I don't have to use any of the plates provided as Nexus5 has wireless charging feature, so the body will stick to the magnet just fine. It is very convenient that I can just throw and it stick easily unlike the hassle of using grip type mount.
Now I hope it will work just fine too with Nexus 6. The non flat back of N6 worries me. maybe I need to modify it so that N6 will not move around when mounted. :fingers-crossed:
digitheatre said:
I'm using Mountek nGroove Snap2 with my Nexus5. It's great that I don't have to use any of the plates provided as Nexus5 has wireless charging feature, so the body will stick to the magnet just fine. It is very convenient that I can just throw and it stick easily unlike the hassle of using grip type mount.
Now I hope it will work just fine too with Nexus 6. The non flat back of N6 worries me. maybe I need to modify it so that N6 will not move around when mounted. :fingers-crossed:
Click to expand...
Click to collapse
I have the same magnetic mount. One of the best purchases I've ever made. I have an iOttie as well but the Mountek is just so much more convenient in that I don't have to slide open the arms to insert or remove my phone.
I have the same concern you do about the curved back. I also use a case and was thinking I'd have to bend the included metal plates to fit between the phone and the case. I absolutely refuse to stick the plate to the back of my case because of the added thickness and the fact that it will just look ugly.
I have the iOttie Easy One Touch 2 Universal Mount (The one that extends), it's a great mount and will fit the N6 without a case. The problem is the button placement on the N6., the mount manages to squeeze the lower volume button when it shuts. Also It will not fit with a case on. Just thought I would let anyone know who was looking into it for a care mount. Again for any other phone this thing is great, best mount I have purchased so far.
RAM X-Grip?
I have been looking into the RAM X-Grip, mostly because of its 4-point "X"-Grip which should avoid pushing any of the hardware buttons.
It is also built like a tank (w/ lifetime warranty) which should lend itself well to any dashboard video recordings should I desire to utilize it for that purpose.
It is relatively expensive ($40-52) but if it out performs (in terms of secure grip & vibration reduction) every other plastic 2-piece pincer style mount then it is absolutely worth the extra investment.
I am still unsure whether the short arm or medium arm length would be best and whether to go with the small or large suction cup option.
I read on Amazon, one pro for the large suction cup (aside from likely better suction) is that the 1" ball (that the arm attaches to) screws on to the suction cup so it can be a bit more versatile (allowing you to screw anything onto the suction cup) should you desire that functionality. Although it appears another option should you desire more versatility from your mount would be to purchase the 1" ball with the plate (w/ screw holes) separately and simply replace the X-Grip mount. This of course means you have the adjustable arm in the system now, but I think that's a good thing.
Last note:
I also read in an Amazon review (and sorta noticed in one video review) there MAY be a bit of play (rotating around the z?-axis, like rotating portrait to landscape) in the X-Grip cradle/mount itself, but more research is necessary to confirm this is actually an issue or just a faulty unit.
First post on XDA
I will be back after further research.