Lagfix for Gingerbread 2.3.6 - Galaxy S I9000 Q&A, Help & Troubleshooting

Firmware : 2.3.6
Build Number : GINGERBREAD.XXJW4
Galaxy S I9000
I've rooted my phone...
And I've been looking for a way to lagfix my phone...
But I keep failing; won't work..
Can someone please help me with it?
I'm a beginner...
Please help...

Just install ( Flash ) any custom rom because it's already have lagfix !
you can try this one :
http://forum.xda-developers.com/showthread.php?t=1829256
or choose anyone as you like ^_^ >>>>>> http://forum.xda-developers.com/forumdisplay.php?f=665
thanks

Hi there, try XWJW6. Its much better and lag-free already.
Then, you may flash CF Root kernel and convert the filesystem from RFS to EXT4.

GINGERBREAD.XWJW8 - Lag?
lifehijack said:
Hi there, try XWJW6. Its much better and lag-free already.
Then, you may flash CF Root kernel and convert the filesystem from RFS to EXT4.
Click to expand...
Click to collapse
Hi - forgive the noob question....it's 2013 and I've got Gingerbread.XWJW8 and find it a bit laggy. I wanted to reflash a custom kernel to address occasional lag. But from above the lagfix is standard. Does this kernel include these anti-lag features? Should I reflash or let it lie.
OBTW, tried to root it using developer mode from a couple of techniques on youtube and it failed. Is this because Samsung blocks it?

nope, flash custom kernel, semaphore or cf root n ur fone will be rooted
Sent from my GT-I9000 using xda premium

Squishy61 said:
Hi - forgive the noob question....it's 2013 and I've got Gingerbread.XWJW8 and find it a bit laggy. I wanted to reflash a custom kernel to address occasional lag. But from above the lagfix is standard. Does this kernel include these anti-lag features? Should I reflash or let it lie.
OBTW, tried to root it using developer mode from a couple of techniques on youtube and it failed. Is this because Samsung blocks it?
Click to expand...
Click to collapse
Yes the above mentioned kernel includes lagfix.
Samsung doesn't block anything. You are not following the correct method.

lifehijack said:
Yes the above mentioned kernel includes lagfix.
Samsung doesn't block anything. You are not following the correct method.
Click to expand...
Click to collapse
Thanks - but may need more help as my phone is in a rebooting cycle now
Downloaded and installed standard Firmware from Sammobile - all good
Followed directions on http://forum.xda-developers.com/showthread.php?t=1044519 and downloaded SpeedMod kernel K16 series which works on older Samsung 2.3.x roms. (mine is 2.3.6 GB). Started Odin3 and installed the .tar and it appeared to flash fine, then rebooted inot a continuous cycle. I followed directions to the letter - what could I have done wrong?
I'll try another older speedmod kernel and see what happens, otherwise it's back to the standard one again.

There shouldn't of been just one .tar, it looks like you may of flashed an update instead of a whole rom.
If there was 3 .tars then you probably put them in the wrong place. Try use a guide off android souls website. They really simple and I used them when I first started.

Related

[Q] ROOTing GINGERBREAD

Hi. I have original samsung's gingerbread and I don't know how I can root it. I read some topics abut it but I still haven't got a answer. ;( All possible rooting roms are custom, but I want root (what I say before) original Nordic software. Please answer. Thanks.
flash chainfire's kernel via odin in pda box and dont tick repartion
here is download link
http://forum.xda-developers.com/attachment.php?attachmentid=570247&d=1302966658
Thanks bro. But I have some questions. It's a kernel, yup? I think when I flash that I will can't change system files (OCLF) please answer and instruct me if I wrong Thanks.
grucha143 said:
Thanks bro. But I have some questions. It's a kernel, yup? I think when I flash that I will can't change system files (OCLF) please answer and instruct me if I wrong Thanks.
Click to expand...
Click to collapse
I dont understand what you wrote here. Anyway chainfire kernel is STOCK. He did some scripting and apps to it but the kernel remains stock. You can tweak stuff later but you dont need to.
Also you could try this http://goo.gl/VS4X4 its for root then you flash your stock kernel back.
Thanks you a lot
ok. I have to made lag fix, and I don't know after I flash that kernel I will can do lag fix. I think if it's stock kernel I can do that but I don't want broke phone
grucha143 said:
ok. I have to made lag fix, and I don't know after I flash that kernel I will can do lag fix. I think if it's stock kernel I can do that but I don't want broke phone
Click to expand...
Click to collapse
Ok. So now I understood you wanna change your fs to ext4 (known as lagfix in the good old days).
And you have JVB (NEE or XEE) . So just follow the advice of the second poster. And install the CF kernel. Also his ext4 app from that thread. Problem is you might not have enough space on your system partition as you got stock. But there is also HOW TO fix that problem .
Sorry, my english is low So I must ask You another time If I flash CF kernel, I receive fs ext 4 in this operation? or I must after install kernel use lag fix (http://forum.xda-developers.com/showthread.php?t=749495)??? Sorry and thanks
So you have OCLF installed now?
Get rid of it.
Install Chainfire's 3.1 kernal, and the ext 4 add-on. Then you will be good to go.
No I haven't got it yet.
This kernel have IN HIMSELF ext4?
http://forum.xda-developers.com/showthread.php?t=788108
In post #7, download the ext4 addon apk. Put it on your internal sd card. After you have the 3.1 kernal installed, install the ext4 apk. The 3.1 kernal is in post #6 for JVB.
Then from within the ext4 tools app, you can convert to ext4.
electrotune1200 said:
http://forum.xda-developers.com/showthread.php?t=788108
In post #7, download the ext4 addon apk. Put it on your internal sd card. After you have the 3.1 kernal installed, install the ext4 apk. The 3.1 kernal is in post #6 for JVB.
Then from within the ext4 tools app, you can convert to ext4.
Click to expand...
Click to collapse
OK. Thanks You everybody for answers. I will click "thanks" button of course for all. Last question: Where I can find Odin to download?
http://www.megaupload.com/?d=PWD334EZ
I can't remember if there's 3 versions of Odin in this zip. If so, use v1.7
electrotune1200 said:
http://www.megaupload.com/?d=PWD334EZ
I can't remember if there's 3 versions of Odin in this zip. If so, use v1.7
Click to expand...
Click to collapse
Thank You very much. There are only 1.7
EDIT: Udało się!!! (in polish it mean: Done!!!)
You're welcome
I dont want to start up another thread, and since my question is related to this thread, i thought id continue it.
Im also on the official 2.3.3 sammy g'bread.
All i want is to get rooted, so that i can delete some of the "in-the-box-apps" found on the phone from the beginning. Do i root the phone, as if its a 2.2?

[Q] From rooted speedmod to unrooted no custom kernel gingerbread

From rooted speedmod to unrooted non-custom kernel
Hi I have the international galaxy s.
I9000DTJP3
kernel version: hardcore speedmod k13c 500hz #24
build number: FROYO DTJP5
Firstly, I have rooted using Super One Click
And I changed my kernel after reading instructions from this forum.
I now want to undo what I've done and go back to the original phone
(and later maybe update to gingerbread)
I've spent a lot of time reading through this xda forum and finally I make my own thread and ask directly.. Sorry if this has been asked already but I searched almost everywhere.. Maybe its my lack of professional vocab.
1. I'm guessing to unroot, I just click 'Unroot' on Super One Click but will this affect my speedmod?
2. I have the 3 Button Method installed but I don't know how to safely test if it works. Just do the 3 button combo and if it works, go back by simply taking off the batteries?
3. So if that worked all well.. I would have an unrooted speedmod phone. How do I remove this speedmod? Stock roms? I don't know what they mean.. is it the default firmware? do I have to flash it in? If I install that would that automatically replace my speedmod?
Thank you.. I would really really appreciate your help thank you..
haha! I`ve got similar question,
I`ve root my SGS using the One Click, did the 3 button fix, and to my surprise manage to flash the speedmod k13e 500.. currently this is my build *#1234#
I9000DXJPE
I9000DXJPB
I9000OLBJPA
a few days ago, i read doc`s kitchen rom and download the cooked rom with this configuration
*NEW* ZSJPK v11.1 WIPE
CSC : XME
Speed mode kernel
DXJPB Modem
2.2.1 jpj browser etc with tweaks, custom bootanimation and mod sound
so my question can I just use the recovery update.zip to install the rom?
p/s I`ve no idea what I`m doing but it look fun to mess around the phone so I`m a beginner that knows nothing but I could read if that matters
I dont know if it will effect the speedmod but if you just flash the stock rom I think it will replace it.. just imagine if you are going to change from one kernel to another or update to a newer version what will you do? just flash it and badaboom the new one will replace the old one.. so it is a similar process..
Just one question.. if you have the EXT4 lagfix you have to undo/disable that first am I right?
To get back to original ROM, get your version from http://samfirmware.com.
If you used any lagfixes disable them before flashing (because the stock-kernel does not support ext4-partitions).
Flash the firmware (PDA, MODEM, CSC) with odin (repartition not ticked).
To verify the 3-button-combo works just power of your phone and then press "Home+Volume-down+Power", then it should enter download mode.

[Q]about rooting/installing rom/kernel SGS. newbie here.

well im kinda new to SGS. i currently use Go Launcher EX as for my phone to look good. and install some games/apps.
what i want to know is what is the best root / kernel / rom. and what should be done first? updating my firmware to gingerbread or installing/flashing root/kernel/rom?
my phone is still froyo as well. just like newly bought SGS.
my phone details:
my phone details:
SGS i9000. (not captivate nor wifi)
Model Number: GT-I9000
Firmware version: 2.2
Baseband version: I9000DXJPB
Kernel version:
2.6.32.9
[email protected] #1
Build Number: FROYO.DXJPE
Click to expand...
Click to collapse
my phone can't stay so long, it can only stay up to like 7~10 hrs, doing texting/quite gaming.
can only stay up to like 3~5hrs with full gaming.
my phone lags sometimes.. especially when exiting/minimizing(press home) the "Eternity Warrior" app. and
playing too long to "Cut the Rope" app.
Click to expand...
Click to collapse
and starting up my phone, takes a while for it to be ready to use. and sometimes lag for any other app use.
i want to have these following apps/or whatever they are: though i dnt know what's their use.
SuperUser
BusyBox
Voodoo
Odin
can someone please help me about these questions?
Thanks in advance for you guys who will help me.
BUMP!! >.<
Look around some custome ROM to flash and lagfix it, after that you have gain root permission and many stuffs u can play around
What's the best way to root stock galaxy s with 2.3.4?
First of all you have to download a 2.3.4-firmware (I'd suggest JVS, it's 2.3.5) and then flash it with Odin (you know how? If no, just let me know and I'll explain it ).
After that just look for a kernel that fits your firmware and also flash it with Odin (PDA-filed) and you're done.
Lunchbox115 said:
First of all you have to download a 2.3.4-firmware (I'd suggest JVS, it's 2.3.5) and then flash it with Odin (you know how? If no, just let me know and I'll explain it ).
After that just look for a kernel that fits your firmware and also flash it with Odin (PDA-filed) and you're done.
Click to expand...
Click to collapse
Should be fine with it, can you direct me to the Odin rom in question please? I take it that its pre-rooted with clockwork recovery?
You could post the steps as it's for a friend and I can direct your post to him.
Hey guys I have a related question regarding kernels, posting here to save creating more threads.
I've come from Froyo 2.1.1 with Voodoo Kernel. Only reason I've updated to JVR 2.3.4 is because I've read this topic: http://forum.xda-developers.com/showthread.php?t=1225879 and realised I can have glorious Voodoo sound again on newer firmware.
So I've gone ahead and followed this guide to update firmware: http://forum.xda-developers.com/showthread.php?t=1139050
However I was unsuccesfuly in installing madrooster's kernel, through Odin I semi bricked and through CWM it gave an error. Perhaps because I am not rooted? However I was successful in installing Dark Core 2.6, I read that this had Voodoo sound but upon installing the Voodoo control plus and running it, no controls were available. It said phone needed to be rooted to load the driver....I'm really lost, I need help
Tried to flash kernel - Think I bricked phone
I tried to flash a dark core kernel using SGS kernel app. Phone rebooted and showed funny colours on the screen with a robotic voice giving commentary every now and again. Now just keeps rebooting and showing random colours on the screen. I have not backed up the phone, but contacts etc are on google. Can anyone help?

[Q] Galaxy Note GT N7000 eMMC Bug/Kernel Related Question

Hi, I have an international varient of the Galaxy Note GT N7000 which using Chainfire's Got Brick App v1.1 says:
eMMC Chip
Type: VYL00M
Revision: 0x19
Verdict: Danger! This eMMC chip is "Known" to have the brick bug!
I once had installed a custom Kingdroid ROM v3 and wiped it but it had resulted in a Hardbrick/Superbrick so i had to take it Samsung Service Center to get it fixed. They have repaired it and given me back the handset with the Stock ICS ROM. Here are the details:
Model Number: GT-N7000
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.15-N7000JPLPD-CL643396
[email protected]#3
SMP PREEMPT Thu May 31...
Build Number: IM74K.JPLPD
Now i have done some researched and found that this bug is only triggered with kernels (ICS stock & leaked) which have the eMMC_Erase function/command. GB kernels are not known to have this erase function so they are safe.. Also the two safe kernels are franco r3 and speedmod k3 (Correct me if im wrong). Can anyone please guide me on the following:
1) Should I flash Stock Gingerbread OR ICS Kernel(franco/speedmod)?
2) Should I use Recover or ODIN?
3) Plz Provide the links for the Kernels - Franco R3 & Speedmod K3 which are safe?
4) Will the above Kernels provide root access?
5) Is abyss kernel safe (because it supports GPU overclock)?
6) Can i flash an ICS kernel over a Gingerbread ROM?
For answering please answer in a similar numbered way so that it is easy to read and understand for me as well as future audience! Thanking everyone who takes time to read and answer!
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
You Flash it in Odin, It will give you CWM and Root too !
Ive attached the kernel to the post for you.
Abyss kernel is safe, But its for GB ROMs only, You are on ICS so it wont work.
I dont know if you can flash ICS kernel over GB ROM, However, Your are on ICS so you shouldnt need to worry about that.
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
azzledazzle said:
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
Click to expand...
Click to collapse
Thanks for the confirmation mate, one more thing to ask you: Is the speedmod kernel faster than the stock ICS kernel? Is there any flaws such as battery drain/WIFI problem with it? Also does it support GPU OC? Thanks once again for your help!
little-vince said:
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
Click to expand...
Click to collapse
Firstly get your Galaxy Note checked using Chainfires App (Gotbrick v1.1). If the verdict says "Danger" only then does your device have this problem. My Galaxy Note (Rev 0x19) had this problem and came with GB out of the box and i upgraded it to ICS through Samsung Kies and it worked fine. So i do not think that while updating to ICS via Kies will cause this problem. As of what i know it is triggered when a command eMMC errase is triggered when either doing a factory reset or wipe through recovery. The update as such did not brick my device, however this does not mean it cannot brick yours. I am no expert on this so be a little cautious while updating. I would suggest stick to GB until Samsung Releases a safe stock ICS ROM with a safe Kernel. Cheers!
really easy
1: (optional ) in GB do factory reset (after you have made a backup with TB)
2: put phone in Download mode.
3: use PC odin flash STOCK ICS rom
4: reboot device let it load
5: put device back into download mode
6: use PC ODIN flash Speedmod k3-3
7: reboot
8: launch CWM and tell it to reboot in cwm recovery
9: load your custom rom of your choice
i HIGHLY recommend doing ONLY THE FACTORY RESET WIPE data and cache in GB before you start anything.
ONCE you are in ICS and have successfully loaded speedmod or franco's kernel then it is safe to do a factory wipe if you want. but ONLY after one of those 2 Kernels are on your device.
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
rp4k said:
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
Click to expand...
Click to collapse
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
little-vince said:
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
Click to expand...
Click to collapse
Yes, this bug is known to trigger usually when you do a wipe using the recovery. However there have been some cases when doing a factory reset via the settings has also resulted in a brick. However if you stay away from recovery and do not intend to doing flashing/wipes then i guess you should be ok. And it is a matter of time before Samsung Comes up with a solution. They are said to be working on this bug already. I have the N7000 which i bricked once while flashing and then wiping but i got it repaired since i had warranty. Since then i have stayed away from wiping or installing any custom roms so the device has not given any problems. Hope this info helps! Cheers!
Rom doesnt load during boot
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
cuteglen said:
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
Click to expand...
Click to collapse
What rom are you on? Have you performed any wipes or factory resets?
Sent from my GT-N7000 using xda premium
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
SpyderTracks said:
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
iraqi4ever80 said:
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
Click to expand...
Click to collapse
Only from GB kernel such as abyss. If you flash from ics kernel you WILL brick. This goes for all cm based roms.
Sent from my GT-N7000 using xda premium
kyllerbuzcut said:
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
Click to expand...
Click to collapse
Hiya, yep, you can just delete the zimage file, no need to replace, it will just skip writing that partition.
Sent from my GT-N7000 using xda premium
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Try mobile odin. If you point to the tar, it should load all the components. You can then review which components are being flashed.
Sent from my GT-N7000 using xda premium
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Add goku, dafuq, gl-notecore and abyss42 (GB) to your list.
2. Only do it from a GB firmware or at least a GB kernel like abyss42. SPECIFIC instructions per firmware is listed for a reason. Follow those instructions to the letter.
3. No.
Sent from my GT-N7000 using xda app-developers app
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Stock rom in a zip? Are you sure you are nit flashing a custom rom? Point us to the file/thread please.
If it is a custom rom, the it is meant to be via CWM.
1. Flash abyss42
2. Reboot recovery
3. Do your wipes
4. Flash.
Im sure there is a specific instruction on where you got that file. Or better yet, go to dr. Ketans thread and get your stock rom from there.
Sent from my GT-N7000 using xda app-developers app
It's just the standard rom file from sammobile.It does come as a zip you know. If you unzip it, then use rar on it you can see all the bits. I thought if I just put a different zimage in there it would just go ahead and use that, but didn't seem to like it after I zipped it all back up again.
Tonight I've ended up getting chainfires excellent CF-Root kernel.Flashed that through odin, over my speedmod kernel.
Put just the factoryfs part of the stock rom zip onto the SD card and flashed that using the cwm app that CF-Root installs for you.. Now have CF-Root kernel and 4.0.4 firmware.
If you don't already have a "safe" kernel then I dunno what the brick chances would be, but since I had a safe one already I thought it couldn't hurt to try it out.
The reason I haven't flashed the hidden, cache, model and sbl parts of the zip is that simply they wouldn't fit on my SD card If it behaves funny or I can make space then I'll try the rest too. And the reason I didn't flash the zimage from the zip should be fairly obvious. Because I don't want a brick
EDIT: I managed to clear some space on the SD and flashed the rest of it. Seems to be working ok, so far anyway. I'm hoping the battery issues from 4.0.3 will be a little better. This is a really good way of doing it all as you can just swap out a potentially bad kernel for one that has been 'protected' by having te emmc cap erase turned off.

Tab GT-P1000 Which version of Clockworkmod do I install?

Hi
I have a non branded GT-P1000 Tab. Trying to follow instructions at http://www.androidauthority.com/galaxy-tab-gt-p1000-android-4-0-4-ics-aokp-rom-97483/ to install AKOP.40 ROM
Need Clockworkmod installed.
Installed Rom Manager then attempted to install Clockworkmod - It asks me to choose my phone type. Closest options are: Galaxy Tab - ATT, Samsung Galaxy Tab - T-Mobile, Samsung galaxy tab - VZW.
What do I install, or is there another version of Clockworkmod for non Branded TAB somewhere?
Thanks ColinK
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
priyana said:
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi
Thanks for your prompt reply. The instructions for flashing overcome seems to have multiple steps and "IF's", with multiple opportunities to go wrong.
The android authority guide seems straightforward, and I have gone through some of it - except the guide makes no mention of how to get CWM.
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
If not, were exactly does the install part start and do I also have to install Odin?
Sorry for so many questions / uncertainty.
ColinK
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
colink said:
Hi
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
ColinK
Click to expand...
Click to collapse
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar filehttp://forum.xda-developers.com/editpost.php?do=editpost&p=29235809
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Actually you can flash a CWM.zip update without installing a kernel after you root your device.
But again, installing kernel with CWM included just like Priyana said would be a lot easier and simpler.
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Hi ColinK,
Unfortunately there is no straight way to install AOKP.
I am afraid you have to follow the guide to the letter, sort of.
This is why.
Some froyo from for our tab has locked bootloader.
So if you are on froyo there is a small chance you had a locked one.
You need to root your tab then run an app to check and to patch.
(I forgot by now whether you need root to check... to patch definitely yes)
Now, that is why Overcome guide said if froyo you need to root.
It is not strickly necessary.
Now, let's assume you don't have locked bootloader.
You only need to use Odin and flash GB stock safe v5 (which is actually Gingerbread Samsung version JQ1 Italian rom)
So, you need Odin.
Unpack the gb stock safe and you find Odin and USB driver.
Install USB driver first, then plug in your tab and your PC will detect the new device.
Unplug your device.
Install Odin.
Launch Odin, put your device to download mode and plug your device in to PC.
I am not a big user of Odin. I use heimdall in Linux which is simple and just work, so my memory is sketchy.
Odin will detect your device. There will be messages on screen.
Line up the files according to the guide and flash.
If no error your tab rebooted and you have GB ROM.
that of course isn't the end because you need cwm.
So continue with the guide.
It asks you to use Odin to flash overcome kernel tar.
Do it and you will end up having cwm recovery.
That is the end of guide.
You don't need to flash overcome rom.
Just follow my other thread reply to get AOKP.
Sent from my GT-P1000 using xda app-developers app
Addition info: The easiest way to check if you are rooted or not:
Download and install 'root check' or 'got root?' from google play store.
If the rooting failed, you can try the doomslords rooting script. It was my favorite root script up to GB2.3.3
Once you succesfully rooted, continue download the bootloader patch for froyo.
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
priyana said:
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
Click to expand...
Click to collapse
I can feel you. I can't even 100% remember if gb-stock-safe is pre-rooted or overvcome kernel gives root access for it.
colink said:
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Click to expand...
Click to collapse
Well Colink, I must say.....priyana's guides are one of the best ones for installing roms ...it's just perfect...I flashed my tab with aokp without even getting a single error....read the overcome guide perfectly ...I know it's a bit confusing but read it ten times and u will be just fine
Sent from my GT-P1000 using xda app-developers app
Overcome links are all down.
Overcome links are all down. Any alternatives? (Rooted gt-p1000 2.3.3 Gingerbread DXJPI
Come on,
a little search in overcome thread and should spot it.
Here is the spoiler
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
I too am trying to get the Tab up to ICS via the overcome procedure, links are down on overcome and not all the links on the tabfirmware are working, specifically the Overcome_Kernel_v4.0.0.zip doesn't work, with a nice <This file does not exist, the access to the following file is limited or it has been removed due to infringement of copyright.> message.
There's also the link to the full overcome site as a screen capture or something in this post http://forum.xda-developers.com/showthread.php?p=20974872, but it's now giving a 404, so my confidence level for doing this is now low ;-(
Any help appreciated. pls, pls, pretty pls.
Don't want a bricked Tab would make me sad
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
and guide here
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
I recommend first upgrading to 2.3.3, then flashing chainfire's modded cwm via odin:
http://www.4shared.com/zip/vsN8JA6x/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
and then flashing overcome via cwm:
http://www.ravishare.com/1fragzl971e6/Overcome_7_Series_v4.1.0_NoWipe.zip.html
then you can flash any aokp or cyanogenmod mtd build.
Upgraded to ICS and thanks
Ok so thanks to all who helped out with links to roms and guides.
I now have a lovely Galaxy Tab with ICS from AOKP.
And for anyone who would like to try but hasn't yet it really is surprisingly easy, just take your time and make sure to do it right, you won't regret the upgrade to ICS
I stood on the shoulders of giants to do this :good:.
So you use the method I posted or what Gogol posted?
Sent from my GT-P1000 using xda app-developers app
ha ha
guyz i need help in installing cwm in my rooted galaxy tab p1000 running 2.2 froyo

Categories

Resources