Database Develop

AOSP ICS (need people to help this project)

I would like to start building this rom (with kernel), because I did not like how it was stopped by Maclaw, but I need people to help me because I have a netbook and the construction of the rom could be very slow.
Any volunteers?

UP

i can help, did u downloaded the source?

Messi10 said:
i can help, did u downloaded the source?
Click to expand...
Click to collapse
Yes now I just have to fill the rom

Fedefriffo said:
Yes now I just have to fill the rom
Click to expand...
Click to collapse
if u have ant error in building post it here and i will try to help

Can I use Squadzone source for the kernel? I know that support the swap partition ...
Ok I finished the repo sync following this guide: http://source.android.com/source/downloading.html , now how do I build for arm-v6? (noob question)

Fedefriffo said:
Can I use Squadzone source for the kernel? I know that support the swap partition ...
Ok I finished the repo sync following this guide: http://source.android.com/source/downloading.html , now how do I build for arm-v6? (noob question)
Click to expand...
Click to collapse
see this guide

Messi10 said:
see this guide
Click to expand...
Click to collapse
Thanks, it was what I wanted

Ok so now I have a problem with the guide, I followed everything but when he says: replace CM9 folder tree with this, do you mean?

Fedefriffo said:
Ok so now I have a problem with the guide, I followed everything but when he says: replace CM9 folder tree with this, do you mean?
Click to expand...
Click to collapse
do this in terminal
cd android/system
git clone git://github.com/Squadzone/GalaxyMini_cm9_config
Click to expand...
Click to collapse

Messi10 said:
do this in terminal
Click to expand...
Click to collapse
Already done, but when I put the command. build / envsetup.sh && brunch tass says it can not find the device

Fedefriffo said:
Already done, but when I put the command. build / envsetup.sh && brunch tass says it can not find the device
Click to expand...
Click to collapse
try repo sync again

Messi10 said:
try repo sync again
Click to expand...
Click to collapse
Ok now I try to build, likely tomorrow afternoon news
One question, can I use the 3.0 kernel source taken by galaxy nexus?

Fedefriffo said:
Ok now I try to build, likely tomorrow afternoon news
One question, can I use the 3.0 kernel source galaxy taken by nexus?
Click to expand...
Click to collapse
i don't think so

there is no "brunch" in aosp;
do:
Code:
. build/envsetup.sh && lunch full_tass-userdebug
Code:
make -j[B]x[/B]
o r
Code:
make -j[B]x[/B] otapackage
where x is jobs, I have 4 cores and 4 threads so I use make -j8

TheWhisp said:
there is no "brunch" in aosp;
do:
Code:
. build/envsetup.sh && lunch full_tass-userdebug
Code:
make -j[B]x[/B]
o r
Code:
make -j[B]x[/B] otapackage
where x is jobs, I have 4 cores and 4 threads so I use make -j8
Click to expand...
Click to collapse
I have this error: federico @ Balamb-DOTS: ~ / $ AOSP_GALAXY_MINI. build / && envsetup.sh lunch full_tass-userdebug
Including device / asus / grouper / vendorsetup.sh
Including device/generic/armv7-a-neon/vendorsetup.sh
Including device/generic/armv7-a/vendorsetup.sh
Including device / bike / wingray / vendorsetup.sh
Including device/samsung/crespo4g/vendorsetup.sh
Including device / samsung / kinky / vendorsetup.sh
Including device / samsung / maguro / vendorsetup.sh
Including device / samsung / bull / vendorsetup.sh
Including device / you / panda / vendorsetup.sh
Including sdk / bash_completion / adb.bash
build / core / product_config.mk: 205: *** No product matches for "full_tass". Arrest.
Product ** Do not have a spec for: 'full_tass'
** Do you have the right repo manifest?
federico @ Balamb-DOTS: ~ / $ AOSP_GALAXY_MINI

you need file full_tass.mk in device/samsung/tass. Check github/MaclawStudios

TheWhisp said:
you need file full_tass.mk in device/samsung/tass. Check github/MaclawStudios
Click to expand...
Click to collapse
I've found full_gio.mk not full_tass.mk

Fedefriffo said:
I've found full_gio.mk not full_tass.mk
Click to expand...
Click to collapse
Just take this (attachment)

Thanks now i build...

[PORT] [ADVANCED] Slackware 14.0 ARM

Slackware 14.0
http://www.slackware.com/
YouTube video: http://www.youtube.com/watch?v=U1fJ1dl4idg
Vitals
(untested) Bluetooth
Touchscreen
Audio
XFCE 4 Desktop and xdm login
On-screen Keyboard
Fits in < 2GB
Firefox
Contains Ninja Swag
Installation
STEP 1: Simply concatenate the three files in the correct order.
Linux/Mac OS X:
Code:
cat HPTPSlackware14test1.tar.gz.* > HPTPSlackware14test1.tar.gz
Windows:
Code:
copy HPTPSlackware14test1.tar.gz.1+HPTPSlackware14test1.tar.gz.2+HPTPSlackware14test1.tar.gz.3 HPTPSlackware14test1.tar.gz
STEP 2: Transfer the created file (without the numeric extension) to your TouchPad and install with SmackMe2.
Downloads
Tarchive part 1 (200MiB): http://www.mediafire.com/?cn3qzx0s4mp5qqv
Tarchive part 2 (200MiB): http://www.mediafire.com/?adpl358rjruxl3h
Tarchive part 3 (84.22MiB): http://www.mediafire.com/?d7muykgdxogod79
Non-kexec (aka uImage) kernel is in the works, but low priority. The kexec kernel is included in the SmackMe post.

dude your rocking my tp lol nice job man
castrwilliam said:
Slackware 14.0
http://www.slackware.com/
Vitals
(untested) Bluetooth
Touchscreen
Audio
XFCE 4 Desktop and xdm login
On-screen Keyboard
Fits in < 2GB
Firefox
Contains Ninja Swag
Installation
STEP 1: Simply concatenate the three files in the correct order.
Linux/Mac OS X:
Code:
cat HPTPSlackware14test1.tar.gz.* > HPTPSlackware14test1.tar.gz
Windows:
Code:
copy HPTPSlackware14test1.tar.gz.1+HPTPSlackware14test1.tar.gz.2+HPTPSlackware14test1.tar.gz.3 HPTPSlackware14test1.tar.gz
STEP 2: Transfer the created file (without the numeric extension) to your TouchPad and install with SmackMe2.
Downloads
Tarchive part 1 (200MiB): http://www.mediafire.com/?cn3qzx0s4mp5qqv
Tarchive part 2 (200MiB): http://www.mediafire.com/?adpl358rjruxl3h
Tarchive part 3 (84.22MiB): http://www.mediafire.com/?d7muykgdxogod79
Non-kexec (aka uImage) kernel is in the works, but low priority. The kexec kernel is included in the SmackMe post.
Click to expand...
Click to collapse
you got me all fired up about my tp just when im thinking is time for new tablet
Rock on

Awesome....awesome....awesome!!!
One note....Im on Windoze 8, copy file1+file2...did not work for me, I had to use the copy /b file1+file2....
Thanks!

+1 this to Google+ and liked your video on. YouTube.
Sent from my Nexus 10 using xda app-developers app

I've combined the files together and posted them for everyone to download as one file here:
https://mega.co.nz/#!wsBFyYjJ!cs6WUgegQopdYPlnaldX-i_5Fthc467IAWv_cVq_UQY

Next awesomesauce port is Fedora 17. Learning systemd init language so I can make the necessary scripts.

Which OS runs better on the touchpad. Ubuntu or Shockware?

rock on dude you on a roll en fuego lol
castrwilliam said:
Next awesomesauce port is Fedora 17. Learning systemd init language so I can make the necessary scripts.
Click to expand...
Click to collapse
rock on

mdleal said:
Which OS runs better on the touchpad. Ubuntu or Shockware?
Click to expand...
Click to collapse
I hate to say this, but Ubuntu 13.04 alpha1 has both my ports outclassed at the moment.
That said, my Slackware port is meant for advanced users to hack on, not necessarily as a finished product like my 12.10 is.
You won't find things like setbrightness, battery and tsrotate.

can i install any package such az web server - libreoofice , ... ?

castrwilliam said:
Next awesomesauce port is Fedora 17. Learning systemd init language so I can make the necessary scripts.
Click to expand...
Click to collapse
Does the development of this project is stopped.
Can u provide some build and how to documentation.
Actually does it work in chroot environment or some other way .....
Please explain...

Pratik Raj said:
Does the development of this project is stopped.
Can u provide some build and how to documentation.
Actually does it work in chroot environment or some other way .....
Please explain...
Click to expand...
Click to collapse
The last post was 4 years ago. I think you can safely assume it's dead.

[Q] Android 4.3 AOSP

Hello everyone. I'm trying to create a firmware based on AOSP Android 4.3. I downloaded the source code and the tree of our device. But at the beginning of the compilation I have the following error.
Lunch menu... pick a combo:
1. aosp_arm-eng
2. aosp_x86-eng
3. aosp_mips-eng
4. vbox_x86-eng
5. aosp_deb-userdebug
6. aosp_flo-userdebug
7. full_grouper-userdebug
8. full_tilapia-userdebug
9. mini_armv7a_neon-userdebug
10. mini_mips-userdebug
11. mini_x86-userdebug
12. m7-eng
13. full_mako-userdebug
14. full_maguro-userdebug
15. full_manta-userdebug
16. full_arndale-userdebug
17. full_toroplus-userdebug
18. full_toro-userdebug
19. full_panda-userdebug
Which would you like? [aosp_arm-eng] 12
build/core/product_config.mk:222: *** Can not locate config makefile for product "m7".
Click to expand...
Click to collapse
Please help to solve it.
Sorry for my bad English.

Try using CM10.2 device tree. Most AOSP Roms use Cm device trees anyway. Just give proper credit.

Xposed error when compiling app_process_xposed.

Hi everyone,
I wanna build old version of Xposed, for Android SDK 16-19, then have tried to compile Xposed fw for hundreds time but still failed.
Environment: Ubuntu 15.10 x64 | tools: JDK 1.6, libc6 ....
AOSP: JZO54L / android-4.1.2_r2 /Jelly Bean ("make app_process" have been run successfully).
My steps:
- Download AOSP into /opt/android/aosp
- XposedBridge.jar: Download Xposed Installer here repo[dot]xposed[dot]info/module/de.robv.android.xposed.installer and detach jar from apk. Put it to /opt/out/java
- Download XposedTools source from github into /opt/xposed/ then make build.conf file:
[General]
outdir = /opt/out
[Build]
# Please keep the base version number and add your custom suffix
version = 58
# makeflags = -j4
[GPG]
sign = release
user = 852109AA!
# Root directories of the AOSP source tree per SDK version
[AospDir]
16 = /opt/android/aosp
# SDKs to be used for compiling BusyBox
# Needs github[dot]com/rovo89/android_external_busybox
[BusyBox]
Click to expand...
Click to collapse
- To integrate Xposed to AOSP, I tried following 2 ways in the instruction (local manifest and manual cloning)
+ local manifest: link [XposedTools]/local_manifests/xposed_sdk16.xml to [aosp]/.repo/local_manifests/ then run repo sync.
+ manual cloning: remove [aosp]/build; clone github[dot]com/rovo89/platform_build/ to replace; clone github[dot]com/rovo89/Xposed into [aosp]/framework/base/cmds/xposed
- Go back to [XposedTools] and run ./build -t x86:16
>>output: cd /opt/android/aosp && . build/envsetup.sh >/dev/null && lunch full_x86-user >/dev/null && make -j8 TARGET_CPU_SMP=true xposed
Click to expand...
Click to collapse
The result I received is a big "app_process_xposed" file (~ 270-350 KBs), it size is as many times as the origin app_process file (~20 KBs). I think there are somethings wrong. I open them by 7z and see some differences:
i.imgur.com/PU80vSV.png
Click to expand...
Click to collapse
I may did some mistakes in these steps. Could you please give me any advice?
Thank so much!

Help me Pls...

Did you actually try the app_process_xposed you got, or did you just assume it was wrong because it was bigger? If you did try it, what did it do?

josephcsible said:
Did you actually try the app_process_xposed you got, or did you just assume it was wrong because it was bigger? If you did try it, what did it do?
Click to expand...
Click to collapse
Thank for your reply. I tried rename app_process_xposed to app_process_sdk16 then push new file to assets folder of XposedInstaller project. When XposedInstaller.apk file installed, i had receive messages not compatible with my sdk 19...

hahalulu said:
When XposedInstaller.apk file installed, i had receive messages not compatible with my sdk 19...
Click to expand...
Click to collapse
What was the exact message that you got? Can you post a screenshot of it?

josephcsible said:
What was the exact message that you got? Can you post a screenshot of it?
Click to expand...
Click to collapse
My message i had received

Update: sdk16.zip file

I'm still stuck at this problem :crying:

hahalulu said:
I'm still stuck at this problem :crying:
Click to expand...
Click to collapse
build duoc chua ban. minh cung dang bi giong ban. khong biet giai quyet the nao

hellboy211 said:
build duoc chua ban. minh cung dang bi giong ban. khong biet giai quyet the nao
Click to expand...
Click to collapse
Please post in English, I have translated this one for you
Regards
Sawdoctor
Build is not acid. You are also welcome. Not the right time

[HELP] Device tree problem in AOSP 8.1 ( Galaxy Grand Prime)

I am facing problem in building AOSP 18.1 i added the device tree given by remelia but i am facing error when i lunch.
Code:
$ lunch
You're building on Linux
Lunch menu... pick a combo:
1. aosp_arm-eng
2. aosp_arm64-eng
3. aosp_mips-eng
4. aosp_mips64-eng
5. aosp_x86-eng
6. aosp_x86_64-eng
7. full_fugu-userdebug
8. aosp_fugu-userdebug
9. aosp_car_emu_arm-userdebug
10. aosp_car_emu_arm64-userdebug
11. aosp_car_emu_x86-userdebug
12. aosp_car_emu_x86_64-userdebug
13. mini_emulator_arm64-userdebug
14. m_e_arm-userdebug
15. m_e_mips64-eng
16. m_e_mips-userdebug
17. mini_emulator_x86_64-userdebug
18. mini_emulator_x86-userdebug
19. uml-userdebug
20. aosp_dragon-userdebug
21. aosp_dragon-eng
22. aosp_marlin-userdebug
23. aosp_marlin_svelte-userdebug
24. aosp_sailfish-userdebug
25. aosp_walleye-userdebug
26. aosp_walleye_test-userdebug
27. aosp_taimen-userdebug
28. aosp_angler-userdebug
29. aosp_bullhead-userdebug
30. aosp_bullhead_svelte-userdebug
31. hikey-userdebug
32. hikey960-userdebug
33. lineage_grandprimeve3g-userdebug
34. aosp_grandprimeve3g-userdebug
35. cos_grandprimeve3g-userdebug
36. omni_grandprimeve3g-userdebug
37. du_grandprimeve3h-userdebug
38. aos_grandprimeve3g-userdebug
Which would you like? [aosp_arm-eng] 34
build/core/product_config.mk:232: *** _nic.PRODUCTS.[[device/samsung/grandprimeve3g/aosp_grandprimeve3g.mk]]: "vendor/aosp/common.mk" does not exist. Stop.

@remilia15 @naimrlet
Help him , please

I think this thread is on wrong section now . Actually you need to post this in Q&A section

herawais said:
Code:
33. lineage_grandprimeve3g-userdebug
34. aosp_grandprimeve3g-userdebug
35. cos_grandprimeve3g-userdebug
36. omni_grandprimeve3g-userdebug
37. du_grandprimeve3h-userdebug
38. aos_grandprimeve3g-userdebug
Click to expand...
Click to collapse
LOL, my device tree doesn't have too many recipes for lunch like this
Are you sure you didn't copy-pasta'd somewhere else?

remilia15 said:
LOL, my device tree doesn't have too many recipes for lunch like this
Are you sure you didn't copy-pasta'd somewhere else?
Click to expand...
Click to collapse
Yes i copy pasted someone's but how to delete other's recepies? can you please guide me as i am new in this work. what is the solution to the error showing .
Thanks

remilia15 said:
LOL, my device tree doesn't have too many recipes for lunch like this
Are you sure you didn't copy-pasta'd somewhere else?
Click to expand...
Click to collapse
these are new recipes and new error occurred.
Code:
33. aosp_grandprimeve3g-eng
34. aosp_grandprimeve3g-user
35. aosp_grandprimeve3g-userdebug
Which would you like? [aosp_arm-eng] 35
build/core/product_config.mk:232: *** _nic.PRODUCTS.[[device/samsung/grandprimeve3g/aosp_grandprimeve3g.mk]]: "/build/target/product/aosp_base_telephony.mk" does not exist. Stop.

@herawis
Ask any one of moderators to move the thread to Q&A section

unknown said:
I think this thread is on wrong section now . Actually you need to post this in Q&A section
Click to expand...
Click to collapse
respected member would you please move this post to Q&A section..

herawais said:
respected member would you please move this post to Q&A section..
Click to expand...
Click to collapse
Ask a moderator to do it
---------- Post added at 01:52 PM ---------- Previous post was at 01:49 PM ----------
herawais said:
these are new recipes and new error occurred.
Code:
33. aosp_grandprimeve3g-eng
34. aosp_grandprimeve3g-user
35. aosp_grandprimeve3g-userdebug
Which would you like? [aosp_arm-eng] 35
build/core/product_config.mk:232: *** _nic.PRODUCTS.[[device/samsung/grandprimeve3g/aosp_grandprimeve3g.mk]]: "/build/target/product/aosp_base_telephony.mk" does not exist. Stop.
Click to expand...
Click to collapse
Edit that .mk file
maybe change it to full_base_telephony
And aosp has aosp_base_telephony , are you sure that you have synced the source completely ?? @herawais

If you are trying to build vanilla aosp with cm (or cm-based) device trees, you are very likely going to have to edit the device tree just to get it to build.

Synthetic.Nightmare said:
If you are trying to build vanilla aosp with cm (or cm-based) device trees, you are very likely going to have to edit the device tree just to get it to build.
Click to expand...
Click to collapse
I dont know how to edit the the files and which file should edit? This is the device tree for aosp 8.0 and i am using it for aosp 8.1

herawais said:
I dont know how to edit the the files and which file should edit? This is the device tree for aosp 8.0 and i am using it for aosp 8.1
Click to expand...
Click to collapse
I wouldnt know what all youd have to modify, but based on your build errors, id start with the Makefiles.
With that in consideration, id recommend you try building something based on lineage (or just lineage, itself) and start modifying that, just so you can start getting an idea of how aosp is compiled. Theres a lot to take in.

herawais said:
I dont know how to edit the the files and which file should edit? This is the device tree for aosp 8.0 and i am using it for aosp 8.1
Click to expand...
Click to collapse
Just use 8.1 kernel to build it