Related
Desire HD Sound Enhancement
Okay guys, this is an update from my thread in the 'General section'. New and improved, contains a list of working an Non-working ROMs and more scripts.
What is this you ask? Well have you ever thought your Desire HD's speakers suck balls? Can't hear the ringtone go off? Or just a crappy overall speaker quality? Well try this out and HOPEFULLY you'll actually like them
-> List of working ROMs (My experience)
- All variations of Cyanogen mod 7
- All Sense 2.36 based ROMs
- MDJ's ROMs
- All current MIUI ROMs (after flashing snd3254.zip)
- ARHD 5.x
-> List of NON working ROMs (My experience)
- Incredible S and Desire s Ports (Few Incredible S ports MAY work)
- Tested 2 3.0 ports and both didn't work, feel free to test for yourself
PLEASE Give me feedback on What ROM you are using when reporting issues and let me know if it works on your ROM if it's not posted up here so I can add it
Methods
-> Terminal Method
1. Download Terminal Emulator from the market
2. Open it and enable SuperUser permissions by typing 'su' and pressing enter
3. Then type either command 'snd3254 xx' where xx is a number from the sound table (Below) or 'echo xx|snd3254 -dspmode'
-> Gscript Method
1. Download Gscript from the market
2. Open it and enable and add a new script
3. Then type either command 'snd3254 xx' where xx is a number from the sound table (Below) or 'echo xx|snd3254 -dspmode'
4. Make sure you tick super user permissions
5. Run script
-> How to enable script on startup
Gscript application -> press and hold the script you want on boot -> save to sd -> download a program from the market called 'script manager' -> go to the folder sdcard/gscript -> select the saved script -> open as 'script' -> then tick the boxes 'run as root' and 'run at boot' -> save it and close the app and your selected script will run at boot!
Sound table
'snd3254 -dspmode xx'
01. Original_Phone_Rec
02. Original_Phone_Spk
03. Original_Phone
04. Original_Spk
05. Dolby_a_spk
06. Dolby_a_hp
07. Dolby_v_spk
08. Dolby_v_hp
09. Srs_a_hp
10. Srs _a_spk
11. Srs_v_hp
12. Srs_v_spk
13. Bass Booster
14. Blues
15. Classical
16. Country
17. Jazz
18. Latin
19. New Age
20. Piano
21. Pop
22. R&B
23. Rock
24. Treble Booster
25. Vocal Booster
- Keep in mind the above table is for sense GB Roms and the MIUI and CM set up is slightly different... Basically the same
- hp = Headphones spk = speakers
- 13 - 25 only applies to Headphones
- Replace xx with a number from the table
- If you are on MIUI or cm refer to - http://forum.xda-developers.com/showpost.php?p=12345725&postcount=2798
Optional
You can create script shortcuts on your homescreen by selecting -> shortcuts -> gscript lite -> then whatever you named your script
Please note that this has nothing to do with the kernel and I am not a Developer myself. I will however talk to Devs and work with them to TRY incorporate this into their ROMs
Let me know if this makes your speakers better in anyway
qwertyuiop
what does the Srs_a_hp and Srs_v_hp
just the a and v.. what do they mean?
Lord_Schrotty said:
what does the Srs_a_hp and Srs_v_hp
just the a and v.. what do they mean?
Click to expand...
Click to collapse
I'm not sure, although i find options with the 'V' provide better quality
Will have a go at it when I'm off work!
on cynogen mod we have dsp manager , it does the same thing right?
will test that, thanks mate
jags_the1 said:
on cynogen mod we have dsp manager , it does the same thing right?
Click to expand...
Click to collapse
DSP manager is nothing in comparison.
Sent from my Desire HD using XDA Premium App
anyone find out which one is better ? i tested most of them and the 07. Dolby_v_spk and
the 02. Original_Phone_Spk is pretty good
should the script include the word: dspmode, or just 2 digi?
Vita.T said:
should the script include the word: dspmode, or just 2 digi?
Click to expand...
Click to collapse
Both
Sent from my Desire HD using XDA Premium App
This app from the link (http://forum.xda-developers.com/showthread.php?t=1055748) does really work for me.
i downloaded the .zip file and moved it to my sdcard, now what do i do? Everytime i put snd3254 -dspmode 08 into my gscript and try running it it says snd3254 not found...
This is exactly how i type it in gscript
snd3254 -dspmode
then i save it, and try to run it, but it will not run... i seriously want my srs enhancement back...
EDIT: i am running the newest MIUI rom for HTC inspire(desire)
Thank you very much this tweak, it is so genius ! The DHD doesn't have a speaker problem it's just this crappy default setting.
Because it took me some time to get it done (i am still new with android), I post some hints. May be it makes it easier for you.
That's the way I did it. My hardware is a rooted (vodafone) branded DHD with standard HTC ROM (1.39).
- For me as a nooby the instructions in the first post seems like there need to be installed something. This scared me some weeks ago and I didn't do anything.
This is not the case ! The attachement is probably only there for other developers. You don't need to install something, everything is already there !
- In order to test the tweak load the app 'Anroid Terminal Emulator'
- Type in 'su' and click enter. In the following pop-up agree to give the terminal emulation superuser rights. (need rooted phone obviously)
- Type 'snd3254 -dspmode'. In the follwing text the dspmodes are shown and you are asked to enter the number you want. Type '04' and click enter. If you have music in the background playing you will notice the huge difference immediately.
- Alternative: Type 'echo 04|snd3254 -dspmode'. But you need to copy it from here or write it somewhere else. As CyberTod (thanks for this useful hint) described in the original thread the onscreen keyboard doesnt have "|" symbol. It does have a similar looking symbol, but it is not the same and it doesnt work if typed on the onscreen keyboard.
If you like the result you can automate the doing either with Gscript or with Tasker as Pleske explained here: http://forum.xda-developers.com/showpost.php?p=13184812&postcount=99
I automated it with tasker and run it on every reboot automatically (the context is event/system/device boot).
i didnt had the snd3254 file in system/bin
i copied it but i get the message:
cannot open codec aic3254 device -1
any ideas?
Thanx for your work guyz.I tried this method and it worked but not as much as I expected.Then my phone started freezing.I dont know if this has anything to do with it.Wiped fon and downloaded equalizer, a free app on the market and damn that little thing is a devil .The base and the sound enhancement is just great.
Snake-Plissken said:
i didnt had the snd3254 file in system/bin
i copied it but i get the message:
cannot open codec aic3254 device -1
any ideas?
Click to expand...
Click to collapse
run as root
Works fine on ARHD 5.1.7
what you mean run as root?
Type "su" (return) first
Sent from my Desire HD using XDA App
Pls have someone of you tried the supercharger v6 script? What was the result? Was it easy to install?
Sent from my LG-P990 using Tapatalk
its great. i installed it when still in stock and still using it with neoblaze kernel.
its already fast even without the oc kernel. you wont see higher number on benchmark apps. but you will feel the difference.
this is from the supercharger thread
http://forum.xda-developers.com/showthread.php?t=991276
Requirements:
1. Rooted Phone....
2. Script Manager or Terminal Emulator to run the script. Stock ROMs can also use SM to load up boot scripts!
3. Busybox 1.18.2 OR LOWER - 1.18.3 or newer are VERY much a hassle with errors that should NOT be errors!
4. AutoStart Script by me - Enables Stock ROMS (Milestone) to utilize etc/init.d for boot scripts.
Installing/Using:
1. Download the attached V6_SuperCharger_for_Android*.txt script and save to your sdcard.
... Do NOT run the V6 SuperCharger install script at boot!
2. Load the script (V6_SuperCharger_for_Android*.txt) into Script Manager and select "Run as Root."
3. Touch the screen for the soft keyboard or slide out the keyboard and get SuperCharged! Just pick an option!
4. READ the script's output!
5. Afterwards, READ the html HELP FILE in the root of your SD Card!
6. Disable "Lock Home in Memory" if your ROM has this option.
7. Optional: For a quick status check, you can put a Script Manager widget for V6 SuperCharger on you desktop
for me, i use the 11th option (oom grouping fixes + hard to kill launcher) then reboot.
cyanogen doesent need the autostarter script ore does it?
Ok,thanks. I am running it now too and it feels really faster
Sent from my LG-P990 using Tapatalk
Hi, may i know which option did you choose? I chose the 8th one(the MAX one) but i don't feel such many differences...
If my memory is correct, i used the option 7, max RAM 512 and hard to kill launcher
It is also for CyanogenMod 7?
plzzzzzzzz tell me how to install v6 supercharger in detail and also the loopy smoothness tweak plzzzz.
purumishra13 said:
plzzzzzzzz tell me how to install v6 supercharger in detail and also the loopy smoothness tweak plzzzz.
Click to expand...
Click to collapse
Search in the general section before asking. I found a tut for V6 supercharger and loopy smoothness tweak
can u plzzz post thelink I CAN'T find the thread
Guide by Qeemi
FOR S5830I
How to proceed:
First of all, after having rooted the device, install Busybox 1.18.2. Download Busybox Installer from the store Play.Once downloaded, open Busybox Installer and choose the version 1.18.2 from the drop-down menu and tap on Install at the bottom. Wait until you install it, close the application and uninstall it.
Now download the Script Manager, install it in phone memory, open it. You will see a window, step on Browse as Root and then click Ok. Then tap the button to the left of the center, and Other ----> ------> Advanced Options> Configuration and make sure it's unchecked the option "export $ HOME".
Now download the script from here and move it to your SD card.
Open Script Manager, tap on V6_SuperCharger_for_Android-Update9_RC8.2.sh
Then tap on "ON" (small skull of Android) and then "Run" at the top.
Wait for it to end the "Test Drive". (To display the keyboard,tap on the screen)
Configuration:
1) When prompted selected with "B" indicating to use the build.prop and not the local.prop
2) Press enter when prompted for the first time to go to setting of the driver.
3) It is requested the speed of scrolling of the script, we set 2 (middle) so we will have the opportunity to read the various commands
4) We are now asked if we run a "fix permissions" on every boot, then press "y" (or any key except "n") then enter.
5) We are asked whether to integrate the script in the / init.rc (folder that contains all the scripts that are executed at boot time) press Y and hit enter
6) We are asked whether to disable the animation presentation of the script each time you invoke the script from the Script Manager, set "Yes".
7) Press Enter to return to the console Driver
8) We are asked whether to apply the settings recommended by the "SuperMinFree Calculator", not accepted by pressing a button other than Y then click Send
9) Press enter again to return finally to the console of Driver
10) We are asked to choose a setting from 1 to 31, Board of type 7 (Super UnLedded) is the ideal setting for the quantity of the Galaxy Acei of ram (290 MB), then hit return. Let Him work.
11) After the establishment press enter to move on and enter
12) Since this is the first time you run the script will now run a "SuperClean" (a wipe Dalvik), press enter
13) When prompted, press Y and the phone will restart.
14) Re-open V6 Supercharger until you return to the choice of various options (no need to resetall, do not worry).
15) Check if the phone is "Supercharged" (just check Supercharged written next to it says 100%).
If yes the stop is at this point, otherwise continue
16) Exit 31 from the script by typing
17) With Script Manager go in folder "/ data" in the phone memory. Scroll down until you find 99Supercharger.sh.
18) Tap on it, then tap on "ON" and "boot" and then click Run at the top. This will open the script, wait for it to appear the word ") Supercharge Complete (" and exit from the Script Manager.Done! 
V6 Supercharger: https://www.dropbox.com/s/oov2rks4wd0hrbe/V6_SuperCharger_for_Android-Update9_RC8.2.sh
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1822542
Tapatalk:
My banana wrote that!
Android-fany said:
Guide by Qeemi
http://forum.xda-developers.com/showthread.php?t=1822542
Tapatalk:
My banana wrote that!
Click to expand...
Click to collapse
bro by what means is dis v6 supercharger useful?
aniket123 said:
bro by what means is dis v6 supercharger useful?
Click to expand...
Click to collapse
Better ram memory management.
100% supercharged
right now my ace i is 100% supercharged and it definately WORKS
THX
thx hitted for android-fany
HELP
if i change my rom, will i have to reinstall the v6 supercharger
purumishra13 said:
if i change my rom, will i have to reinstall the v6 supercharger
Click to expand...
Click to collapse
You have to use the script again, but it will fund all your settings.
Tapatalk:
My banana wrote that!
---------- Post added at 09:02 AM ---------- Previous post was at 09:00 AM ----------
purumishra13 said:
thx hitted for android-fany
Click to expand...
Click to collapse
And don't forget to press the thanks button
Tapatalk:
My banana wrote that!
Osumest way of super charging
I found the osumest and latest way of supercharging its fu*kin easy hope everyone like it.IF any problem occurs post here i will solve.
LINK:- http://forum.xda-developers.com/showthread.php?t=991276
Desire C people!
This stuff is good. Probably you heard about it already, now I tried it and seems to work very well, especially the memory management. Quite a sophisticated tool as far as me noob understand ugh,ugh! :cyclops:
So basically a collection of kernel and memory management tweaks, but has a lot of other like SD card tweaks and maintenance scripts which you can also schedule with SManager. And the download page has some other useful stuff like 3G turbocharger and battery calibrator.
In all it seems like a must have for DC users.
http://forum.xda-developers.com/showthread.php?t=991276
Once you used it a bit it's pretty straight forward and explains everything in details when running the script, and you have the option to "unsupercharge", but have a nandroid backup at hand.
I used two guides, but the first is for Galaxy and the second is less detailed:
http://forum.xda-developers.com/showthread.php?t=1603953
http://forum.xda-developers.com/showthread.php?t=1908505
And for Desire C, check the post below
Many thanks for nikhil16242 for recommending me this, many scripts are in his Customiser already, he would have integrated the whole V6 Supercharger, but Aroma doesn't like it. That would be awesome though!
All credits to zeppelinrox for these truly awesome scripts:good:
One wonders why android doesn't have some of them by default.
V6 Supercharger Install Guide for Desire C
~ v6 supercharger install guide for desire c ~
aka how I have done it, so it's not an absolute one.
zeppelinrox's original thread is here.
Originally Posted by zeppelinrox
What's it do?
It makes your phone FAST... super snappy with better multitasking!
It rearranges and fixes the OOM Groupings and Priorites and lowmemorykiller values.
So basically, it's a COMPLETE MEMORY MANAGEMENT FIX!
It's the ONLY one of it's kind
NO LAUNCHER REDRAWS, faster than ever, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
So fasten your seat belts and enjoy the ride!
Click to expand...
Click to collapse
NOTE: Delete all conflicting scripts from init.d folder, otherwise it will be laggy and annoying!
Conflicting scripts I have found so far:
- all the thunderbolt except miuiCMremount (V6 does most of these like sd card tweaks and zipalign anyway)
- mpengine and laserdroid (also from /system and /xbit)
If you don't know which scripts are from where, unzip nikhil16242's Customiser and check the folders.
Also do not install everything on one breath. Do it gradually (v6 - nullifier - engine flush and so on), test with a demanding game like Temple Run, so you can opt out any possible problems.
What you need:
All V6 scripts are here.
ScriptManager [download]
- If you have stock ROM:
Download Supercharger Starter Kit from the V6 scripts, on the page it's explained how to use it, couldn't be more simple:
Using SuperCharger Starter Kit (Prepares your ROM with the fixed su binary, zipalign binary, sqlite3 binary and busybox v1.19.4... and does NOT include the V6 SuperCharger scipt):
- Extract the zip to the root of the sdcard and it will all be in /sdcard/SuperCharger_Starter_Kit
- With Script Manager, just run StartMeUp.sh to install everything at once.
- Or, in terminal do: su, enter, sh /sdcard/Super*/Start*
Click to expand...
Click to collapse
All the rest is the same as the following:
- If you are on custom ROM:
then busybox is already installed, so you don't need the starter kit.
I. SUPERCHARGER INITIAL SETUP
The script guides you through the process, so watch it closely. In the setup it automatically determines some optimal settings, but you can change them any time.
Step 1. Put the latest V6_SuperCharger_for_Android-UpdateX_XXX (X is the actual version number) on your SD card
Step 2. In SManager:
--- 1. make sure you have granted SuperUser access, and set browse in root (long press recent apps button > Menu > Advanced > Configuration > Browse as root), but if you used before it's already set
--- 2. open the script on your SD card, set the properties to: Favorites (star icon), Root (green android skull icon) and tap Run to execute the script installer.
Step 3. A bunch of text start to come up, watch it closely, it guides you through the installer. Home Locked in Memory? n (No) and press enter and another enter to continue to drivers console.
First it goes to Pit Stop to set Driver Options, where you will be asked for Scroll Speed but also various tweaks which can improve the performance. Go through each and decide if you want them or not (I enabled most of them in he script)
When asks Use Build.Prop? : n (No) to use local.prop - I chose this, it sounds safer.
Step 4. You need to patch services.jar. It can be done automatically or manually (however the script recommends manual, and when I did it automatically for the first time, it did not backup services.jar and could not unsupercharge, only by restoring it from the rom .zip) Don't worry, doing it manually couldn't be easier:
In the Driver's Console choose:
25. Jelly ISCream Parlor {Install services.jar}Choose manual mode, which will take you to the [RC9] ULTIMATIC RC6! [EXE]-=Ultimate Jar Power Tools=-With Maximum MultiTasking Mods! thread in your default browser, from which the essential instructions are the following:
--- 1. Connect your Android to your PC with Android Debugging ENABLED and Mass Storage DISABLED so your device has access to your sdcard. I just put it in Charge Only mode...
--- 2. Download the latest Ultimatic_Jar_Patcher_Tools_XXX_Windows.exe.zip to your PC - Windows exe is NOT zipped. Just remove the .zip extension!
--- 3. Start the exe and follow the instructions in the script. It will ask you which mode you want to use your Launcher in: Hard To Kill Launcher, Die-Hard Launcher or BulletProof Launcher. Choose Hard to Kill (HK), it is the best for our device.
You can add Maximum Multitasking mod as well, according to tests it works fine, but I did not install it in the beginning, then didn't bother
If follow the instructions in the script till the end, your services.jar should be patched, and the script will confirm this.
--- 4. On your phone in V6 script, you are still in the menu 25., right? Press x (exit), which takes you again to the Driver's Console. Choose: 32. SuperClean & ReStart! (ie. Wipe Dalvik Cache & Reboot)
Step 5. Press enter to return to Drivers Console. Pressing enter will automatically run Quick V6 Cust-OOMizer and will calculate optimum SuperMinFree values
Apply SuperMinFree Calculator Settings? : y (Yes) to apply calculated MinFree (low memory killer - lmk) values so you don’t need to choose, but you can change it after completing the initial setup and then running the script again in menu point:
10. Quick V6 Cust-OOMizer.Or if you type n (No), you can choose manually right away, doesn't make a difference. If it was set automatically, go to step 5. and come back later if you want to change it:
For a low memory device like ours, 512 HP recommended, these are the options in menu points:
5. UnLedded (Multitasking) {8,14,40,50,60, 75}
6. Ledded (Balanced) {8,14,55,70,85,100}
7. Super UL (Aggressive) {8,14,75,90,95,125} - it does 130-140MB
However the best setting recommended me by educated colleague nikhil16242 and I tried is:
10 15 25 45 80 100 (slot1 - slot2 and so on)
with this I always have 120-130MB free RAM and no lag, Temple Run is butter smooth Basically it kills processes below that level (but still prioritises them - really smart script), which means less multitasking, but two-three apps that I needed in multitask were working perfectly, I didn't notice any difference, but snappier phone.
Try whichever suits you best.
Step 6. Press Enter - this action will backup Re-SuperCharger files to SD Card, in case you want to restore your Supercharger settings.
Step 7. SuperClean & ReStart : y (Yes), this will wipe your dalvik-cache so bootup time will take longer this time.
Step 8. After restart, open SManager and:
--- 1. Go to /system/etc/init.d (you can bookmark it for later access)
--- 2. Tap on S99SuperCharger and set the following properties:
------ a. Favorites (star icon)
------ b. Root (green android skull icon)
------ c. Start on Boot (gear icon)
--- 3. Tap on Save, close Script Manager and Restart your phone
NOTE:
If you don’t follow step 8., you will get an error the next time you run the script and it will show you owner’s handbook on your default web browser.
II. OOMIFIER & LAUNCHER
If you patched services.jar and choose SuperMinFree values manually then you have this already. If not, then:
OOM Grouping Fixes will determine which are the more priority apps and keeps them alive better. The Launcher mode determines how easy it will be for the mem killer to kill the launcher in case of low memory. Works flippin good, I'm tellin ya
Step 9. After restart, open SManager and Run V6_SuperCharger_for_AndroidX_XXX script again (make sure you run it in root [skull icon] but not boot [gear icon])
--- 1. SuperCharger will run Test Drive, just wait for it to finish and then continue to the Drivers Console.
During the install it should set the optimal mode automatically, which was BulletProof for me, probably because I chose the aggressive memory kill (sounds convincing lol) mode. Anyway, this means the Launcher will never get killed, about which some say it's not recommended.
--- 2. So on the Drivers Console you can choose between these launcher modes in the menu points, in reverse order of toughness:[/INDENT]
11. OOM Grouping Fixes + Hard To Kill Launcher
12. OOM Grouping Fixes + Die-Hard Launcher
13. OOM Grouping Fixes + BulletProof LauncherEventually I changed it to Hard To Kill, but it's up to you.
--- 3. Hard To Kill? : y (Yes) to apply
Press Enter to go back to Drivers Console
III. NITROLAG NULLIFIER
It's an experimental feature, don't know what it does exactly, but I switched it on Everything is flawless for me since, so I say go for it.
Step 10. In the Drivers Console, select:
21. Nitro Lag Nullifier {Experimental}Enter (N)ullify, (U)n-Nullify, E(X)it: N (Nullify) to apply Nitro Lag Nullifier
After applying Nitro Lag Nullifier, press enter to go back to Drivers Console.
IV. 2 in 1 ENGINE FLUSH
It flushes the RAM cache so the phone doesn't get sluggish after days of usage.
The 2 Modes are: -=Fast Engine Flush=- for instant flush and -=Engine Flush-O-Matic=- for automation.
Step 11. In the Drivers Console, select:
17. Engine Flush-O-Matic {ReCoupe RAM Booster}Continue and drop all file system caches? : y (Yes) to clear system cache on RAM
It will ask you (gives you 20 s to decide lol) if you want to automate it, so you don't need to schedule it in SManager. If yes, you set an interval between 1-24, which counts as hours, so it determines how frequently flushes the RAM cache. Some people set it for every hour, so why not, I did that too. Hmmm that was good
After Engine Flush, press enter to go back to Drivers Console.
V. SUPERCLEAN AND RESTART
Wipes dalvik and reboots the phone, you need that before you start to using it.
Step 12. In the Drivers Console, select:
30. SuperClean & ReStart {Wipe Dalvik & Reboot}Do you want to SuperClean & ReStart now? : y (Yes)
VI. VERIFY SUPERCHARGER STATUS
Step 13. After restart, open SManager and run V6 SuperCharger again. You should see Supercharger Level: 100%, then you are good to go.
As the script rolls it indicates your settings so you know what is set and what's not. You can check out the other menu points, and number:
27. Owner's Guide {Open !SuperCharger.html}This opens the... Owners Guide! ...in the default browser, you can wise yourself up about the different options.
VII. KICKASS KERNELISER
Downolad the script and launch it the same way as V6. Look at the text, wisen up and choose KickAss (k).
It will place S98KickAssKerneliser script in init.d, skull it and gear it, and reboot the phone.
TIPS & TROUBLESHOOTING
If you are only 75% supercharged, that probably means MinFree (the mem killer) settings doesn't stick (so you see you have the usual low amount of free RAM). Check the S99Supercharger script in SManager if it has the root and boot privileges (In /system/etc/init.d or Long pressing recent apps button > Menu > Scripts), set them again if they were not and reboot the phone. If it's not set again, open Owner's Guide to figure out what's next, but if you followed the steps properly, you should be fine.
Check the note in the beginning of the post for deleting conflicting scripts!
All the scripts and backups are in two places:
1. on SD card /V6_SuperCharger folder
2. /data/V6_SuperCharger
and the logs and manuals under them.
When you run a script in SuperCharger, it places a separate one in the folders, so you can make widgets with SManager for fast access:
- Long press home screen, select SManager from widgets, locate the SuperCharger folder and select the script you want to have at hand.
- For example for quick change between MinFree modes, the scripts will be in V6SuperCharger/PowerShift_Scripts (you need to run them in SuperCharger first in order to be created separately, or if you installed the additional V6 scripts (or something like that) in nikhil16242's Customiser before, they will be in init.d already).
You'll know you have chosen a suitable MinFree mode if if you play Temple Run with no lags at all shaboooooom!!!!
See, wasn't too hard and you are SuperCharged now.
Enjoy it like a Boss!
Kudos to CarlDeanCatabay and Androidmarketuser for the guides that helped me and are in the OP.
And most of all to zeppelinrox for V6 SuperCharger :good:
Started reading looks great but by ekk I'm finding it hard to get my old head round some of it. Usually when I'm like this I have to read read read till it starts making sense .So will prolly take me a bit of time.
Re: [Script][TWEAKS] V6 Supercharger
This script is really awesome once you get everything done properly,just takes a while to read the entire OP though .
Ram management is another very essential thing to be done on a low ram device like ours.Stock ram management seems to be poor imo so I use this and the results are truely amazing .
Sent from my HTC Desire C using xda app-developers app
thanks
neoyoli said:
Desire C people!
This stuff is good. Probably you heard about it already, now I tried it and seems to work very well, especially the memory management. Quite a sophisticated tool as far as me noob understand ugh,ugh! :cyclops:
So basically a collection of kernel and memory management tweaks, but has a lot of other like SD card tweaks and maintenance scripts which you can also schedule with SManager. And on the download page has some other useful stuff like 3G turbocharger and battery calibrator.
In all it seems like a must have for DC users.
http://forum.xda-developers.com/showthread.php?t=991276
Once you used it a bit it's pretty straight forward and explains everything in details when running the script, and you have the option to "unsupercharge", but have a nandroid backup at hand.
I used this detailed guide, but it's for Galaxy so use your brain
http://forum.xda-developers.com/showthread.php?t=1603953
Here's is an other one, just in case, but less detailed:
http://forum.xda-developers.com/showthread.php?t=1908505
Many thanks for nikhil16242 for recommending me this, many scripts are in his Customiser already, he would have integrated the whole V6 Supercharger, but Aroma doesn't like it. That would be awesome though!
All credits to zeppelinrox for these truly awesome scripts:good:
One wonders why android doesn't have some of them by default.
Click to expand...
Click to collapse
works great
guide updated
Hey guys, well actually i have an issue while i'm trying to run the v6 supercharger. It succesfully passes the drive test but it gets stuck at the next step. it throws me a lot of lines like 'find system/lost+found/ Too many open files' and i can't get rid of it, please help
this guide is quite old now, supercharger has been updated since numerous times. if you have a nandroid backup restore it, if not then ask zeppelinrox in his original thread. also supercharger does automatic backup before you apply the settings, which can be restored from the menu if something goes wrong, try it.
(i) Slimming your ROM:
Original thread by darknessx10: http://forum.xda-developers.com/showthread.php?t=2387429
Remove (either from the ROM/Gapps zip before you flash, or after with a file manager, but don't forget to reboot):
/system/tts
/system/fonts/*.ttf (remove all unnecessary fonts that you don't use (see thread linked above))
/system/media/video (useless)
/system/media/audio/alarms (I use a custom song)
/system/media/audio/notifications (just leave one that you use, I use Argon.ogg, or delete all if you use a custom one)
/system/media/audio/ringtones (I use custom songs)
/system/usr/srec/config (offline Google Now - useless)
/system/lib/*.so (remove all unnecessary Google libraries that you don't use, for example, these are safe to remove):
Code:
libfilterpack_facedetect.so (Face unlock, useless)
libflint_engine_jni_api.so (Google TTS)
libfrsdk.so (Face unlock, 1.8 MB)
libgcomm_jni.so (obsolete Google+ library, 7-8 MB)
libgoogle_recognizer_jni.so (Google Now, 7-9 MB)
libgoogle_recognizer_jni_l.so (Google Now, 9 MB)
libgtalk_jni.so (Google Talk, 4 MB)
libgtalk_stabilize.so (Google Talk)
libjni_latinime.so (LatinIME, only remove if you use another keyboard app)
libmicrobes_jni.so (Microbes wallpaper)
libnfc.so (only delete if you don't use NFC)
libnfc_jni.so (only delete if you don't use NFC)
libnfc_ndef.so (only delete if you don't use NFC)
libpicowrapper.so (Pico TTS)
libplus_jni_v8.so (Google+)
libspeexresampler.so (Google TTS)
libspeexwrapper.so (Google TTS)
libttscompat.so (Pico TTS)
libttspico.so (Pico TTS)
libvideochat_jni.so (Google Talk, 4 MB)
libvideochat_stabilize.so (Google Talk)
libvorbisencoder.so (Google Ears)
/system/app/*.apk (remove all unnecessary apps that you don't use, for example, these are safe to remove):
Code:
Apollo.apk
BasicDreams.apk
CellBroadcastReceiver.apk
ChromeBookmarksSyncAdapter.apk
CMAccount.apk
CMFileManager.apk (I use Root Explorer)
CMWallpapers.apk
DrmProvider.apk (leave if you have DRM-protected songs/videos)
DSPManager.apk
Email2.apk (I use Outlook app)
Exchange2.apk (unless you need Exchange Services for email)
FaceLock.apk
Galaxy4.apk
GenieWidget.apk
Gmail.apk
GoogleBackupTransport.apk
GoogleEars.apk
GoogleFeedback.apk
(Google)OneTimeInitializer.apk (runs one time after flashing gapps, safe to remove after)
GooglePartnerSetup.apk (do not remove if you have a credit card linked to your Play store)
GooglePlus.apk
GoogleTTS.apk
HoloSpiralWallpaper.apk
HTMLViewer.apk
LatinIME.apk (do NOT remove unless you have another keyboard app (I use Kii))
LatinImeDictionaryPack.apk
LiveWallpapers.apk
LiveWallpapersPicker.apk
MagicSmokeWallpapers.apk
Microbes.apk
Nfc.apk (if you don't use NFC)
NoiseField.apk
PhaseBeam.apk
PhotoTable.apk
PicoTts.apk
QuickSearchBox.apk (remove if you don't use the Google search widget in the homescreen)
SetupWizard.apk (do not remove if you have not setup your phone yet (account, language, time, etc.))
SoundRecorder.apk
SpeechRecorder.apk
Stk.apk
Tag.apk (if you don't use NFC)
Talk.apk
Talkback.apk
ThemeChooser.apk (I don't use themes)
ThemeManager.apk (I don't use themes)
Thinkfree.apk
Torch.apk
Trebuchet.apk (do NOT remove if you don't have another launcher app)
UserDictionaryProvider.apk
VisualizationWallpapers.apk
VoiceDialer.apk
VoicePlus.apk
VoiceSearchStub.apk
VpnDialogs.apk (unless you use VPN)
ROM and /system will be 85 MB+/- lighter.
See a description of most CM/Google apps here, otherwise google for more information.
If you are not using CM, you have other stock apps. Google them to see if they are okay to delete.
Extra: After every reboot, there are some useless Google services running in the background. Go to Manage apps and select Running apps. For me they are Google Play services and Google Play Store. Click them and stop PendingNotificationsService, GoogleLocationManagerService, NetworkLocationService, NlpLocationReceiverService and AnalyticsService. GPS and Play Store will still work normally and notify you of updates, etc. They seem to re-start themselves every so often, too... If you don't want to do it manually and disable them permanently (without them restarting), you can use Disable Service to do it for you. You can also use this app to disable certain services from, for example, Facebook, if you don't use them, and save RAM. Alternatives that show more service processes/receivers are Autorun Manager (formerly Autorun Killer) and System Tuner.
(ii) V6 SuperCharger:
Original threads by zeppelinrox: http://forum.xda-developers.com/showthread.php?t=991276, http://forum.xda-developers.com/showthread.php?t=1914159
(there may be other steps in future versions)
1. Download the latest SuperCharger_Starter_Kit_RC12.zip (check thread to be sure)
2. Download the latest V6 SuperCharger script, V6_SuperCharger_for_Android-Update9_RC13-For_Your_Lag_QF.sh.pdf (right click and "save as", remove the .pdf file extension from the filename, it is NOT a pdf!) (check thread to be sure)
3. Download the latest Ultimatic_Jar_Patcher_Tools_RC7_TEST6_ALL_DEX_ALL_OSes_NO_FLASH.zip (this does not work on Android 4.4 (KitKat) yet!) (check thread to be sure)
4. Put the contents of SuperCharger_Starter_Kit_RC12.zip and the script (step 2) on your phone.
5. Run Terminal Emulator, go to the directory where you put the contents (ls to show directories, cd to move to a directory), type su and enter. Type sh Start* (Note the capital S, not s. The asterisk * is so you don't have to write the entire filename).
5.1. The script will ask you if you want to install BusyBox v1.19.4 (wraithdu). If you already have BusyBox, skip this step.
5.2. The script will ask you if you want to install the su binary v3.1 (wraithdu). You already have the su binary, so skip this step unless you get an error during setting up the V6 SuperCharger script.
5.3. The script will ask you to install the sqlite3 binary. It will auto-detect if you already have it. If you do, skip this step.
5.4. The script will ask you to install the zipalign binary. It will auto-detect if you already have it. If you do, skip this step.
6. Type sh V6* (Note the capital V, not v).
6.1. The script will ask you to select a scrolling speed. Select 0 (not on the list).
6.2. The script will ask you to select the kernel "reboot tolerance". I chose (N)one, most people choose (H)ard I think.
6.3. The script will ask you to use "Entropy-ness Enlarger", select no
6.4. The script will ask you to use "System Property Accessory Tweaks", select yes.
6.5. The script will ask you to use "3G TurboCharger", select yes.
6.6. The script will ask you to use "SD Read Speed Tweak", select no.
6.7. Set BulletProof Apps if you want.
6.8. The script will ask you to use Engine Flush-O-Matic, select yes, I chose 4 hours.
6.9. The script will ask you to use "Detailing", select yes, I chose 2 boots.
6.10. The script will ask you to use "Fix Alignment", select no.
6.11. The script will ask you to use "Wheel Alignment", select yes.
6.12. The script will ask you to use "Fix Emissions", select yes.
6.13. The script will ask you to disable the script animation, select yes.
6.14. The script will ask you to apply "SuperMinFree Calculator Settings", select yes (you can later change the values by selecting either "Unledded", "Ledded" or "Super UL" values).
The following steps do not work on Android 4.4 (KitKat) yet:
7. Connect your phone to your computer with the USB cable, NOT as a mass storage device. Have debugging turned on.
7.1. Unzip the contents from step 3 to your COMPUTER, not phone. Run "ultimatic_jar_patcher_adb.bat" on Windows, "ultimatic_jar_patcher_adb.sh" on Linux or Mac.
7.2. The script will ask you to restart ADB as root, select no, it works without it.
7.3. The script will ask you to "SuperCharge services.jar", select yes.
7.4. The script will ask you to select the launcher strength, select "Die-Hard" (or something else if you want).
7.5. The script will ask you to use the "Maximum MultiTasking Mods", select yes.
7.6. After the script is done, type su and reboot.
8. Open Terminal Emulator, type su and run the V6 script again (step 6).
8.1. The script should say "100% SuperCharged": If it's not, sucks to be you.
Note from the script:
In case of lag, due to too many apps running, RAISE the minfree levels.
For bettter MultiTasking, LOWER minfree levels.
Click to expand...
Click to collapse
Also recommended is to install the 3G TurboCharger script (right click, save as, remove .pdf extension). Read the generated .html file in the SDcard after running the script to select your preferred values (I chose 4).
(iii) Fly-On Mod™:
Original thread by slaid480: http://forum.xda-developers.com/showthread.php?t=2226373
Download the latest version of the zip - at the time of writing this, it is Signed_Fly-On_Mod™_V4.0-Beta6.zip.
You will have to edit the zip, because there are things that conflict with V6 SuperCharger and CrossBreeder (basically delete all scripts except 98fly_engine and 92cleaner).
Remove the following files:
Code:
/system/bin/entropy_on (don't need this)
/system/bin/entropy_off (don't need this)
/system/bin/Fly-On (don't need this)
/system/bin/uninstaller (don't need this)
/system/etc/rngd [B](conflicts with CrossBreeder)[/B]
/system/etc/hosts
/system/etc/init.d/03kill_media_server (you can keep this script if you want, but you don't need it on KitKat)
/system/etc/init.d/sqlite_optimize [B](conflicts with V6)[/B]
/system/etc/init.d/09sdcardspeedfix [B](conflicts with CrossBreeder)[/B]
/system/etc/init.d/darky_zipalign [B](conflicts with V6)[/B]
/system/etc/init.d/zipaligndata [B](conflicts with V6)[/B]
/system/etc/init.d/ram_manager [B](conflicts with V6)[/B]
/system/etc/init.d/94Governor_tweaks [B](conflicts with CrossBreeder)[/B]
(and all the .log files in /data/Fly-On/ that you don't use if you want)
And here is a temporary fix for 92cleaner. Do that.
Save zip (don't flash yet). If your ROM's filesystem is EXT4 (type mount into Terminal Emulator and it should list /system, etc. and say which filesystem it is. If you don't see ext4 anywhere, skip this step), also download the Fly-On_EXT4_tweak.zip. Put both zips on your SDcard (don't flash yet).
Note: if you want, you can leave the files that are conflicting with V6 (except ram_manager!), but then you must disable them in V6 so they don't conflict with Fly-On!
(iv) CrossBreeder:
Original thread by idcrisis: http://forum.xda-developers.com/showthread.php?t=2113150
Download the older 7.2.13 version (needs some manual tweaking for Android 4.3 and 4.4). Goodbye_p_edition and 12.1.2013 are unfinished "work in progress"/test versions and have some bugs. There will be a new app version soon.
Put the zip on your SDcard, reboot into recovery and flash:
1. Fly-On Mod
2. EXT4 tweak (if your ROM supports it)
3. CrossBreeder
Reboot, start Terminal Emulator, run:
Code:
su -c "/system/etc/CrossBreeder/ENABLE_GOVERNOR_TWEAKS"
su -c "/system/etc/CrossBreeder/ENABLE_IO_TWEAKS"
NOTE 1: Use CrossBreeder instead of AdAway or AdFree for adblocking. Having a huge hosts file (AdAway/AdFree) actually slows down the network speed! By using CrossBreeder's adblocking engine instead, the network speed is even faster and there are no ads! The only cost is 3 MB of RAM, but it's absolutely worth it. You can still use AdAway to update CrossBreeder's adblock master list. If you have AdFree, uninstall it.
NOTE 2: If you have Seeder (app) or any other entropy generating script, disable them. CrossBreeder's haveged engine is far superior to any other entropy engine. You can use Seeder to check the entropy levels only, but do not enable it. If for some reason entropy does not hover in the 4096 range, force-enable CrossBreeder with (although it should auto-start 99% of the time - maybe it takes a few minutes to stabilize):
Code:
su -c "/system/etc/CrossBreeder/zzCrossBreeder FORCE"
(v) Fast GPS lock:
Original thread by sgspluss: http://forum.xda-developers.com/showthread.php?t=2523667
***
Thought I'd also throw this in... Some of my must have apps and other useful apps:
http://forum.xda-developers.com/showpost.php?p=41031365&postcount=15
+
Lockscreen Policy - disable widgets in lockscreen on Android 4.2+
Smart Lockscreen protector - disable reboot/power off/aeroplane mode in lockscreen
Volume Locker - lock volume settings so you don't accidentally mute/unmute with the volume keys in lockscreen
FolderMount - like Directory Bind, but better (supports emulated storage and doesn't run in background)
Disable Service - disable certain processes/services
Autorun Manager (formerly Autorun Killer)
System Tuner
(The above two are similar to Disable Service, but they list more processes and have more features. Also, some processes/receivers detected by Autorun Manager aren't detected by System Tuner, and some detected by System Tuner aren't detected by Autorun Manager. So stupid... Make one app that detects all!)
CatLog
CPU Spy - monitor CPU states
DroidCamX
AnTuTu Benchmark
MX Player + codec
Documents To Go or Quickoffice Pro v5.7.327 (before Google acquired it)
Sygic GPS
Opera Mini (fastest/lightest browser) or Opera
ezPDF Reader - pdf annotation
Seeder - to monitor entropy only, otherwise disabled
Titanium Backup
BusyBox Free
Avast Mobile Security - for Firewall and Anti-Theft only (separate apps). Disable all other features, as there are no viruses for Android, so you're just wasting RAM.
No-frills CPU Control - best setup is:
smartassV2 (governor) + sio (scheduler)
or
SmartassH3 + sio (a little more battery friendly, very tiny (negative) difference in performance from smartassV2)
If smartassV2/SmartassH3 is not available, use ondemand. If sio scheduler is not available, use noop. Also, some people prefer deadline over noop (if available), but most choose noop if sio is not available.
Ultimate L3 build.prop?
I've also compared build.prop values set by the following three scripts:
V6 SuperCharger
Project Fluid
Near Project Butter
And threw them all together, hopefully creating the "ultimate" build.prop for L3 (L5 and L7 with JellyBean don't need this):
Code:
#Qualcomm specific tweaks. Might cause reboot on other.
com.qc.hardware=true
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
#Unlock fps limit
debug.egl.swapinterval=0
#Render UI with GPU and GPU tweaks:
debug.composition.type=gpu
debug.egl.hw=1
debug.sf.hw=1
ro.sf.compbypass.enable=0
#enable harware egl profile
debug.egl.profiler=1
#Enable tile rendering
debug.enabletr=true
persist.sys.composition.type=gpu
#16BIT transparency , Smother Scrolling
persist.sys.use_16bpp_alpha=1
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
#Fluid UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
#Device supports EHRPD
ro.config.ehrpd=true
#System prop for tethering denied
ro.tether.denied=false
#Possible screen glitch fix
debug.gr.numframebuffers=3
#Disable boot animation for faster boot
debug.sf.nobootanimation=1
#Disable debugging notify icon on statusbar
persist.adb.notify=0
#Enable Hardware 3D
hw3d.force=1
#Phone will not wake up from hitting the volume rocker
ro.config.hwfeature_wakeupkey=0
#Unlock phone by menu key
ro.config.hw_menu_unlockscreen=false
#Save power while phone is in sleep mode
ro.ril.disable.power.collapse=1
#Ringtone rings without delay
ro.telephony.call_ring.delay=0
#The wifi scan interval in seconds so you can use a lower or higher value.
wifi.supplicant_scan_interval=180
#Better scrolling responsiveness
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#Better touchscreen responsiveness
touch.presure.scale=0.001
#Support for ipv4 and ipv6.
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
#Faster boot
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
#Better battery life
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
#Enable 16 BIT
debug.fb.rgb565=1
#VM tweak
ro.vold.umsdirtyratio=20
#Disable Zygote loader
ro.wmt.blcr.enable=0
#Better in call voice quality
ro.ril.enable.amr.wideband=1
#Signal Tweaks
persist.cust.tel.eons=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
#Wireless Speed Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
#Website Bypass
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
#Graphics Enhancement:
#Raise photo and video recording quality
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=75
#Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
#DalvikVM:
dalvik.gc.type=precise
dalvik.vm.dexopt-data-only=1
#Enables register map for tracking objects to garbage collect. Might give a little more RAM at the cost of a few CPU cycles.
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.jniopts=forcecopy
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.verify-bytecode=false
#Unknown functions
debug.kill_allocating_task=0
debug.overlayui.enable=0
dev.pm.dyn_samplingrate=1
ENFORCE_PROCESS_LIMIT=false
persist.sampling_profiler=0
ro.debuggable=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
#Media quality improvements
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=true
#Might or might not work:
#debug.performance.tuning=1
#video.accelerate.hw=1
#Enable surface dithering
#persist.sys.use_dithering=1
#ro.sec.proximity.delay=0
#Raise photo and video recording quality
#ro.media.dec.jpeg.memcap=20000000
#Not working:
#persist.sys.ui.hw=1
#dalvik.vm.checkjni=false
#dalvik.vm.execution-mode=int:jit
#Fix some application issues/Disable kernel error logging
#ro.kernel.android.checkjni=0
#ro.kernel.checkjni=0
Just append at the bottom of /system/build.prop under the values set by V6 SuperCharger, save and reboot. Make a backup just in case you get a bootloop and save it as /system/build.prop.orig as well as on your PC. In that case, it's easy to recover with either ADB or a flashable zip. No need for any nandroid backups. But it shouldn't cause a bootloop...
All credits to the original authors.
Hey man I have a problem. When I connect my device, it passes java and all, after I select No to restart adb as root, it says:
Found BusyBox v1.20.2-cm9!
==========================================================
But if you see any "applet" not found errors...
...you need a better busybox build!
==========================================================
Storage partition is /sdcard
==========================================================
Permission denied
The system cannot find the file specified.
==========================================================
/sdcard is NOT accessible... Abort! Abort!
And I can't go any further. Suggestions? Thanks.
brchina said:
Hey man I have a problem. When I connect my device, it passes java and all, after I select No to restart adb as root, it says:
Found BusyBox v1.20.2-cm9!
==========================================================
But if you see any "applet" not found errors...
...you need a better busybox build!
==========================================================
Storage partition is /sdcard
==========================================================
Permission denied
The system cannot find the file specified.
==========================================================
/sdcard is NOT accessible... Abort! Abort!
And I can't go any further. Suggestions? Thanks.
Click to expand...
Click to collapse
try to dissable android debuging and enable it, also i have alowed root access so that is work for me an hour earlier
You mean during the process?
Sent from my LG-E400 using Tapatalk 2
brchina said:
And I can't go any further. Suggestions? Thanks.
Click to expand...
Click to collapse
That's weird. Try Developer options -> Root access -> Apps and ADB, and then when the script asks you to restart ADB as root, select yes instead of no.
There's a newer version of Busybox available, by the way (1.21.1).
thanks, its very nice :good:
great guide,nice and usefull thread.thanx hitted-5 stars rated!!!! :good:
thanks, its very nice
f3tus said:
Original threads by zeppelinrox: http://forum.xda-developers.com/showthread.php?t=991276, http://forum.xda-developers.com/showthread.php?t=1914159
1. Download the latest SuperCharger_Starter_Kit_RC12.zip
2. Download the latest V6 SuperCharger script, V6_SuperCharger_for_Android-Update9_RC12_Test_6.sh.pdf (right click and "save as", remove the .pdf file extension from the filename, it is NOT a pdf)
3. Download the latest Ultimatic_Jar_Patcher_Tools_RC7_TEST6_ALL_DEX_ALL_OSes_NO_FLASH.zip
4. Put the contents of SuperCharger_Starter_Kit_RC12.zip and the script (step 2) on your phone.
5. Run Terminal Emulator, go to the directory where you put the contents (ls to show directories, cd to move to a directory), type su and enter. Type sh Start* (Note the capital S, not s. The asterisk * is so you don't have to write the entire filename).
5.1. The script will ask you if you want to install BusyBox v1.19.4 (wraithdu). If you already have BusyBox, skip this step.
5.2. The script will ask you if you want to install the su binary v3.1 (wraithdu). You already have the su binary, so skip this step unless you get an error during setting up the V6 SuperCharger script.
5.3. The script will ask you to install the sqlite3 binary. It will auto-detect if you already have it. If you do, skip this step.
5.4. The script will ask you to install the zipalign binary. It will auto-detect if you already have it. If you do, skip this step.
6. Type sh V6* (Note the capital V, not v).
6.1. The script will ask you to select a scrolling speed. Select 1 (fast).
6.2. The script will ask you to use Build.prop, select no.
6.3. The script will ask you to select the kernel "reboot tolerance". I chose (N)one, most people choose (H)ard I think.
6.4. The script will ask you to use SD card tweaks, select yes.
6.5. The script will ask you to use "3G TurboCharger", select yes.
6.6. The script will ask you to use "Fix Alignment", select no.
6.7. The script will ask you to use "Wheel Alignment", select yes.
6.8. The script will ask you to use "Fix Emissions", select yes.
6.9. The script will ask you to use "Detailing", select yes, and then set to 5.
6.10. The script will ask you to "Integrate", select yes.
6.11. The script will ask you to disable the script animation, select yes.
6.12. The script will ask you to apply "SuperMinFree Calculator Settings", select yes (you can later change the values by selecting either "Unledded", "Ledded" or "Super UL" values).
6.13. Select option 32 to "SuperClean & ReStart".
7. Connect your phone to your computer with the USB cable, NOT as a mass storage device. Have debugging turned on.
7.1. Unzip the contents from step 3 to your COMPUTER, not phone. Run "ultimatic_jar_patcher_adb.bat" on Windows, "ultimatic_jar_patcher_adb.sh" on Linux or Mac.
7.2. The script will ask you to restart ADB as root, select no, it works without it.
7.3. The script will ask you to "SuperCharge services.jar", select yes.
7.4. The script will ask you to select the launcher strength, select "Die-Hard" (or something else if you want).
7.5. The script will ask you to use the "Maximum MultiTasking Mods", select yes.
7.6. After the script is done, type su and reboot.
8. Open Terminal Emulator, type su and run the V6 script again (step 6).
8.1. The script should say "100% SuperCharged": If it's not, sucks to be you.
Note from the script:
Click to expand...
Click to collapse
I have a question: works also on stock lg l3??
diego88it said:
I have a question: works also on stock lg l3??
Click to expand...
Click to collapse
I think you need init.d support. You can try, the script will warn you and maybe offer a workaround. Not sure.
Bump. OP has been updated. Newer version of script is available.
f3tus said:
Bump. OP has been updated. Newer version of script is available.
Click to expand...
Click to collapse
hi does cm9 roms have native init.d support ?? and also does sdmerge remove it ?? i want to know cause i tried operation killjoy and it din't work.. Exit_only replied back that i din't have init.d
support..! !
drkingtech said:
hi does cm9 roms have native init.d support ?? and also does sdmerge remove it ?? i want to know cause i tried operation killjoy and it din't work.. Exit_only replied back that i din't have init. support..! !
Click to expand...
Click to collapse
CM9 has init.d support and SDMergE doesn't remove it. Forget Killjoy, I'll update the OP with more tweaks today.
f3tus said:
CM9 has init.d support and SDMergE doesn't remove it. Forget Killjoy, I'll update the OP with more tweaks today.
Click to expand...
Click to collapse
thanks bro ..nice to hear this..!!
drkingtech said:
thanks bro ..nice to hear this..!!
Click to expand...
Click to collapse
There you go, OP completely renewed.
Great guides,keep it up:thumbup:
GREEEEETZ!!!!
f3tus said:
There you go, OP completely renewed.
Click to expand...
Click to collapse
really cool ..Thanks man..!!
I had just done the v6supercharger on V20E , im questionning me it'is necessary to apply all scipt like flying mod etc ? it's stable for the phone ?
Kouhai said:
I had just done the v6supercharger on V20E , im questionning me it'is necessary to apply all scipt like flying mod etc ? it's stable for the phone ?
Click to expand...
Click to collapse
Completely stable and noticeably faster than using just V6.