Spigen Valentinus Case - Vintage Brown - Galaxy Note II Accessories

Hello All,
I bought the Spigen Valentinus case for the note 2 Link To Amazon a little while back and wanted to wait to do a review just to spend some time with it. The case is made of "Genuine Leather" and from what I can tell that statement is true. The color I chose was vintage brown it is a nubuck leather nice and soft. I am one of those who use the wallet side of the case and can say that I can comfortably fit 2 cards in each slot (4 slots total). Along with having 4 card slots that is an opening for cash or whatever else you may need to store, in my case train tickets I unfortunately do not have a second camera on hand so the following gallery of shots only show the case and the wallet being used (as I took the pics with the phone lol). I will update this thread once I get time to take pics with the phone in case.
The part in which holds the phone is tight so there is no risk of the phone falling out and does not wiggle while in the holder. I can easily access the volume rocker and screen on/off switch, usb and headphone jack are also easily accessible. One issue I do have with the case, and this could be completely my doing is that with the cards in the wallet, the bottom part of the wallet side pushes right up against the phone while in pockets hitting the home button to turn the phone on. Another issue I can see is that the cards rub against the screen of the phone, not an issue in my case because I have a Spigen Ultra Crystal protector on and also keep a small microfiber cloth laid over the screen when its in its case.
Other than those small issues the case looks great, feels great and functions well too. The snap to hold the case closed is tight as well so it wont come undone without you wanting it to. Cut outs for the rear speaker and camera as nice and accurate. The case does add a bit of bulk to the phone as expected with a wallet style case. I have debated on applying leather conditioner or mink oil to the case to darken the color up a bit and give it a bit of water proofing. As of now the best comparison I can think of for the leather would be a timberland boot. Here
Anyways, Enjoy the gallery. Here

Hello again
Just a quick update... no I still have not had time to get out the digi cam to snap pics of the phone in the case but I do have updated pictures of the case. So when I first bought the case it was a light nubuck color kind of like a nude/ unfinished leather. Well after a couple weeks of use and some mink oil, I can happily say that the leather is a more caramel color or perhaps a baseball mitt kind of shade, I seriously love the new color.
New Gallery Here

I'm getting this case in a week or two. Still debating between vintage brown and light brown. So the case darkens naturally? If that's the case then that would be really nice! Is it the kind of leather that gets dirty easily or can you just wipe out dirt and grime? (is it glossy like the light brown version)

prinzhernan said:
I'm getting this case in a week or two. Still debating between vintage brown and light brown. So the case darkens naturally? If that's the case then that would be really nice! Is it the kind of leather that gets dirty easily or can you just wipe out dirt and grime? (is it glossy like the light brown version)
Click to expand...
Click to collapse
Hey! You're from Manila too and I see you in the Philippines thread for the Note 2. How are you getting the case? Having it shipped or do you have a local source?

The case is kind of suede when you first get it. It will darken naturally over time hence why they called it vintage. I sped up the process a little by conditioning the leather with mink oil. This will repel water and dirt. The case is not shiny maybe after an initial coat of mink oil but the leather will absorb the oil.
Im now on a secind application of mink oil I will probably do another soon which should darken it more. You can probably use another leather conditioner to get it to the color you want.
Sent from my SGH-T889 using Tapatalk 2

Related

Aluminum Metal Case

I received yesterday my protection for Leo. I share with you the results of this:
http://www.flickr.com/photos/[email protected]/show/with/4210742282/
For shipping this protection:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000801&products_id=26364
Thanks for sharing; however you would have been better off posting in the Cases thread where we all go to see what's happening in the world of cases.
WB
Agree with above poster, can a mod fix this?
Nice case! ive also ordered 1 last week at PDAir, the 1 without a screen, so easy acces, but fewer protection. I am hoping its more solid so i can put it in my back pocket without getting a red face everytime i realize i accidently put it there...
When did you order it and did it took long (i am eager to get mine, but now hope is gone till monday or tuesday...)
I disagree.
The "Cases" thread is too long and too complicated for discussing any one specific case.
Anyway I ordered mine just a moment ago and would very much like to hear how quick was the shipment, how snug is the fit and how reassuring the neoprene feels
It's a shame they opted for a plastic screen protector instead of either a window-less aluminum door or a transparent cover that lets you work with the touchscreen.
mohasea said:
I received yesterday my protection for Leo. I share with you the results of this.
Click to expand...
Click to collapse
mohasea,
How thick is the plastic cover over the screen?
Does the plastic cover flex?
Do you think the plastic cover would prevent the screen being cracked if dropped screen down on ummm concrete?
Duperman said:
It's a shame they opted for a plastic screen protector instead of either a window-less aluminum door
Click to expand...
Click to collapse
I totally agree, wish they had a solid aluminum front door instead of the window cut-out covered in plastic or the other option they have of no plastic window cut-out. I would order one now,even not having my Leo yet, just because the front door was solid aluminum.
I am going to contact PDair and see if they would leave a few front doors out of the cnc cutter and have a full cover aluminum
Would you like one too, Duperman ?
Thank you,
Monnie
I have ordered an open screen case despite it may not fully protect the screen. HD2 has a glass screen and it is hard enough against scratch as what has been in iphone.
Would you like one too, Duperman?
Click to expand...
Click to collapse
Absolutely
Mine, the one without screen plastic, is supposed to arrive between now and Jan 27th next year...(sometime)
take care
Anyone got theirs yet?
Would love to see some detailed photos and a review of the case pros/cons
Thank you,
Monnie
I'm debating whether to go with their leather flip case or this aluminum case...
I got this case and immediatly wished there was no plastic screen on the front door. So, I held it over some boiling water for about 2 mins and and then used my thumb nail (not kidding it was easy) to pry the plastic from the metal. The whole lot peeled off easily, i replaced the foam into the case and BAM perfect case. (be careful not to rip the foam, but if you do it will still stick back. also the foam stretched out a bit but pushed back into shape no problem. TIP: Work from the front side of the case, wedge your nail into the seem and loosen it all the way around. If it starts to get tough again, hold it over steam for a while longer.
Also.. when the plastic was still inplace and the case door was closed, there would be random screen presses and that was not cool, however now that the plastic is out, i can leave the door closed, press when I want too, AND there is no random case presses
I know this sounds like a poor fix, but it worked awesome and it looks like it was SUPPOSED to come this way.
Now all i need is for my zag shield (front only) to show up and im perfectly protected (minus water damage dammit)
awesome case guys im not kidding. you dont have to put the nubbin on in the back either so it doesnt add much bulk to teh phone. good luck yo.
Got mine too and I use the black open faced aluminum for local use and insert the whole unit;
aluminum case and all into the Maxpedition "Rat" wallet for carrying on belts etc.... http://www.maxpedition.com/store/pc/...&idcategory=11
Like it alot....
FWIW
well, do not kill me if I say so .. but it is ugly as hell.
I do not say that it does not protect the phone, or the the finishing it's not ok .. but from a slim phone with a huge screen, it looks like a bullet proof brick with a screen.
The whole idea of an elegant smartphone it's gone.
Small question: what do you hate about the original leather case?
It is elegant, slim easy to use and protect the phone in normal use conditions or small accidents.
Capdase Alumor Metal Case
Bought this silicon w/ aluminium backcover case by CAPDASE in Hong Kong, adding a more "solid" feel over the pure silicon case. It comes with a CAPDASE screen protector as well.
http://www.mobimega.com/capdase-alumor-metal-case-htc-hd2.html
Beware that the silicon case may not glue well to the aluminum backcover (I think it's the factory problem) which may leave a small gap between them when you put the phone in. I have to apply some glue to fix that myself. Apart from the case is nice and not too costly.
byronlee said:
Bought this silicon w/ aluminium backcover case by CAPDASE in Hong Kong, adding a more "solid" feel over the pure silicon case. It comes with a CAPDASE screen protector as well.
Beware that the silicon case may not glue well to the aluminum backcover (I think it's the factory problem) which may leave a small gap between them when you put the phone in. I have to apply some glue to fix that myself. Apart from the case is nice and not too costly.
Click to expand...
Click to collapse
Hi,
I am seriously thinking about ordering one for my Desire (A8181).
But what I'm not able to find, is how it works. I mean, you seem to describe the case as a silicone skin, with a metal plate sticked to it.
I thought it was more like a silicone skin with another semi-case to "clip" over the silicon....
Can you confirm if I am right or wrong?
And can you post multiple angles pictures?
Thank you, it would be much appreciated!
thanks but
so uglly
Ohh Great!
Thanks for the pictures! To me is one of the best cases i've ever seen.

[handmade] paracord pouch [pics]

i'm sort of a knothead and since paracord is fun to work with i decided to make a case for my hd2 out of 550 paracord. colors are endless so i can make pretty much any color pouch i want.
the sides are woven with elastic braided band and helps keep the phone tight while also letting the side get loose enough for the phone to slip in.
the pouch is VERY snug and the only thing i regret is that i can't fit my HD2 in there with the rubber casing that came with it. i might make third one that is two more rows in width - just to see if it slips in with the rubber case on.
the hardest part was keeping the weave straight as i made it. i redid the maroon about 4 times before i was satisfied with the uniformity.
sidenote: there is no stitching. every loose end is tucked in.
enjoy!
looks like the links changed on my dropbox gallery photos.
here's the link to the gallery itself.
Dropbox HD2 paracord sleeve / pouch
erm - no link to the photos

Roocase exec tough review with pics

So I received this case for free in exchange for an honest review. First of all I'm very anal about cases and I now own 6 cases for my edge. My favorite before testing out the roocase is the UAG maverick/ice case. Upon opening the roocase i noticed it was a high quality built case. I didn't notice any sharp edges from manufacturing. it felt sturdy and well made and the lines were well constructed. when i put the phone in the case the first negative i noticed as you will see in the front pic is that it fits really well on the sides but the top and bottom don't cover the silver trim of the edge. A millimeter more of case would cover that all up and make it more aesthetically pleasing to the eye from the front. all the ports/ holes line up perfectly. the case feels slim in the hand and it is comfortable to hold. it has protruding nubs on the back of the case so the case lays on those nubs intead of the back face of the case...a nice touch that UAG uses too. I do like the reinforced corners for impact protection and they aren't too enlarged which some case manufacturers do like ballistic. the buttons look metallic. I don't know if they are real metal but they look nice and they are very responsive. and have a great feel to them.One other thing I would change but this could just be a personal preference is that the sides are a little wide and thick and take away a little from the beauty of the edge. the uag case actually designed the sides angled to flow with the shape of the edge which visually adds to the edge sloping effect which this case doesn't. it's totally flat which i think would look fine for a flat screen like the regualar s6 but on the edge , following the edge design keeps the beauty of intact. it's a minor issue. the camera out back if very welll protected. i wish there was a little more design in the white part of the case to give it a little more character and maybe some type of rubber or ridges on the sides to add some grip. I do wish there were more colors available. they have black,white, pink, and red. i wish there was a blue, neon green, etc colors added. i ordered a black on white punisher vinyl sticker to put on the back to add some character. i'lle post pics when i get that on. If you like to switch cases alot this case might not be for you. it is hard to remove since i believe the sides are reinforced with something rigid and they don't flex much.it's the hardest case for me to remove out of my 6.it's hard to get it off the button part. if you don't remove cases often then this is a plus because it's not coming off during a fall or any every day use!Overall i give this case an 8/10. I would say it's my second favorite case out of my 6 cases behind my UAG and says alot with how anal I am about good cases. Thank you roocase for sending me a case. I think with a few tweaks/more color options and word of mouth/advertisement that your company will be a case manuracturer to be reckoned with. thanks again
Got my punisher vinyl sticker on to give the case some character
Hey there Camboteav,
Before all else, I just want to say that the sticker addition that you added onto the case looks incredible! I liked the idea so much that I stole my manager J.Armstrong’s Exec Tough case and stuck a Pokéball on it! :3
Also, I would like to personally thank you for taking the time to provide us with an honest review of the Exec Tough case that we sent out to you. We appreciate the feedback that you had for this case; it carried a lot of valuable ideas and we will definitely take your thoughts into consideration! Much appreciated!
With admiration of your amazing idea,
Bev

best thin case note 20 ultra with grip

I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
I switch phones often, but one thing that remains constant is my Pitaka MagEZ cases. Have purchased well over 10 of them at this point. Wouldn't choose any other thin case
PseudoChris said:
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
Click to expand...
Click to collapse
Does the pitika have a lip to protect the screen? Thanks
magichoward said:
Does the pitika have a lip to protect the screen? Thanks
Click to expand...
Click to collapse
The "Air" series cases generally don't rise above the screen.
They do have a thicker "Pro" series option with a raised lip to protect the screen, bumpers on the corners, etc.
Samsung OEM silicon. Can confirm it has excellent grip
seoulbrova said:
Samsung OEM silicon. Can confirm it has excellent grip
Click to expand...
Click to collapse
The cloth one does as well since there's a slim silicone band along the edge.
zedwards said:
The cloth one does as well since there's a slim silicone band along the edge.
Click to expand...
Click to collapse
Yes I've seen the one the only concern I've read it's a little difficult to remove the spen.. Your thoughts.
I will never choose Pitaka again.
Edges are rough and the upper part could have covered more
But I especially won't because it damaged my Note 10+ because of a defect in the inside of the case that made a grain of sand sized hole in the back of my phone.
Been using the Zizo Bolt on my Note 10+ for over 6 months. Excellent grip, usability and protection.
Kick stand doubles as a grip; either fully retract/extend it to keep from losing it's pins, if not secured in either position they can work their way out in your pocket! No issues with this case otherwise.
The one for the 20 seems to come with a temper glass screen protector; that may not work so well.
That's not present on the one for the 10.
Presumably you can use it without and substitute one one your choice?
Damn the 20's cam has a big bullseye on it... no likey. Buying a good case for the 10+ was very hard early on, no doubt the 20 U will be harder to protect
https://www.zizowireless.com/produc...axy-note-20-ultra-case?variant=32315584282672
magichoward said:
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
Click to expand...
Click to collapse
https://www.amazon.com/JJNUSA-Handmade-Leather-Samsung-Galaxy/dp/B08DXWJSQ1?ref_=ast_sto_dp
you know i never thought trying to find a case was going to leave me so hard pressed. note i do not mind the camera bump one bit. but they could have rounded out the camera hump a bit more. not the corners, but where the surface meets the edges and also they could have slanted the sides a bit more angled. who knows they did pull it off pretty good.
still on the camera bump.
note: with JJNUSA leather case you will be covering the mic on the camera bump. if that is a problem for you look elsewhere for a case.
i have received 200 in incentives to order goodies when i got my phone pre ordered and used it to order a few cases.
cases i ordered:
samsung rugged: bulky, heavy, don't like the texture on the back and flimsy kickstands that shoot off when used
samsung leather case: upgrade from last years, 2g lighter. seamless, but warps at the bottom. good cam protection.
samsun silicon: unsure if food grade safe. and slippery as glass
-other cases-
spigen Rugged Armor: oddly best all tpu case with carbon fiber accents. the back is slippery if trying to reach across the screen. side bumpers have one way slip grip and flimsy. camera is well protected. pen cut out too deep corner exposed but covered. top /bottom bumper good but top may block ear piece. 2g heavier then jjnusa leather
...now my official review of the JJNUSA Handmade Leather Case...
NOTE i used amazon prime
don't let the first pic they have on amazon throw you off, but what bothers me is the video they added to the product and it is of the s20 ultra; the camera lens is so scratched. i am still baffled how they did that. then again we will see in due time, because i can not stand the samsung leather case(which got me hooked on leather cases oddly) it is too slippery. the jjnusa case has tpu sides and saddle leather on back with plastic on the inside that the phone rests on. but i will say the leather on the back is so soft i think it sorta makes up for the lack of suede like the official samsung case has. then again the leather is so thick its' edges pop out the mold a teensy-weensy bit, but i doubt with proper use and not picking at it it will survive for a long time. with the 5% off coupon i also got another 1 usd off(who knows if it was the amazon prime). so for 19.95 it is a steal. most other leather cases are $30+. a steal; why may you say? hold on let me get to the rest of it. if we all remember the lg g4 leather back it was a looker. that was it, because it scratched easily and punctured easily. then we go onto the samsung leather case that scratches easily with minimal show. further more i can not say what that will mean over long term usage with this case from jjnusa. treat it lightly and it should be fine. now back to the leather on the jjnusa case. the leather reminds me of the type you get on a saddle and does not separate from itself. that is a plus. but a minus if the antiquing they use comes off very very easily?, and it does(con or not?) i had a cane that had antiquing and it turned my hands black, but after it leveled out it was fine. you know they always slap so much on to fill in the design that almost certainly more then half they put on will rub off. i have rubbed off some already. hence it would not rub off like wow, i had to use my nail. no way does it show like scratches on the samsung leather case. either way the extra antiquing will no matter what fade away over time and settle down to where it should be. i still think it will look good. at the same time the leather is much more scratch resistant then the latter. and the design and the look really grew on me. now on to the sides. the power button and volume are labeled with symbols and i like it even though i will never look at it. what else i like is that they are tpu like the rest of the sides. the tactile of the buttons are sturdy then again not too stiff not too mushy. then there is a bonus or an achilles heal; you move down the same side as the buttons and find a wrist strap punch out so you can add a wrist strap. have not tested it, seems like it should be worthy of use and not fearing. the bonus is removing the phone from the case, it does not shoot out like it does with the samsung leather case does. still it holds it in better. this is where i tell you that the jjnusa case has way better screen protection that leaves a better feel in the hand. the samsung leather case has a squidgy spongy top and bottom. the bottom is already warped and i never used it; i just put it on a few times and took it off. also a fail for the bottom bumper is the difficulty to remove the spen without nails. the jjnusa case is cut out just right and since it is thinner and more stiffer in a good way you can press your thumb or finger and hear that satisfying click to eject it. with that said the top and bottom bumper are raised higher then the samsung to protect the screen. the samsung case is more flush and flimsy.
i am a happy camper and if it fairs well i will update to 5 stars from 4, but i am really thinking at the price to slap down for another. as we all know leather cases do not last as long as other types
the reason i gave it 4 stars is i never really heard of JJNUSA till i saw them on etsy.com and since they where based in china i thought meh. then i thought to ebay's third party cases and said but leather? does not smell much like leather, oddly that is how saddles with the same type of leather smells. or it could be the antiquing they used and the shipping package. it was not shipped in a box or cheap plastic, it was in a cloth sleeve in a sealed padded envelope. JJNUSA do claim Oregon origins... yeah right etsy.com says ships from china.
i have played around with plenty of cases and phones in cases so it's not like i only have really had the note 20 ultra... just do not get one of them ultra thin all tpu cases. i have one for my lg g4 and only really protects the sides and back. busted the screen.

My review of the jjnusa note 20 ultra leather case

https://www.amazon.com/JJNUSA-Handma...ef_=ast_sto_dp
you know i never thought trying to find a case was going to leave me so hard pressed. note i do not mind the camera bump one bit. but they could have rounded out the camera hump a bit more. not the corners, but where the surface meets the edges and also they could have slanted the sides a bit more angled. who knows they did pull it off pretty good.
still on the camera bump.
note: with JJNUSA leather case you will be covering the mic on the camera bump. if that is a problem for you look elsewhere for a case.
i have received 200 in incentives to order goodies when i got my phone pre ordered and used it to order a few cases.
cases i ordered:
samsung rugged: bulky, heavy, don't like the texture on the back and flimsy kickstands that shoot off when used
samsung leather case: upgrade from last years, 2g lighter. seamless, but warps at the bottom. good cam protection.
samsun silicon: unsure if food grade safe. and slippery as glass
-other cases-
spigen Rugged Armor: oddly best all tpu case with carbon fiber accents. the back is slippery if trying to reach across the screen. side bumpers have one way slip grip and flimsy. camera is well protected. pen cut out too deep corner exposed but covered. top /bottom bumper good but top may block ear piece. 2g heavier then jjnusa leather
...now my official review of the JJNUSA Handmade Leather Case...
NOTE i used amazon prime
don't let the first pic they have on amazon throw you off, but what bothers me is the video they added to the product and it is of the s20 ultra; the camera lens is so scratched. i am still baffled how they did that. then again we will see in due time, because i can not stand the samsung leather case(which got me hooked on leather cases oddly) it is too slippery. the jjnusa case has tpu sides and saddle leather on back with plastic on the inside that the phone rests on. but i will say the leather on the back is so soft i think it sorta makes up for the lack of suede like the official samsung case has. then again the leather is so thick its' edges pop out the mold a teensy-weensy bit, but i doubt with proper use and not picking at it it will survive for a long time. with the 5% off coupon i also got another 1 usd off(who knows if it was the amazon prime). so for 19.95 it is a steal. most other leather cases are $30+. a steal; why may you say? hold on let me get to the rest of it. if we all remember the lg g4 leather back it was a looker. that was it, because it scratched easily and punctured easily. then we go onto the samsung leather case that scratches easily with minimal show. further more i can not say what that will mean over long term usage with this case from jjnusa. treat it lightly and it should be fine. now back to the leather on the jjnusa case. the leather reminds me of the type you get on a saddle and does not separate from itself. that is a plus. but a minus if the antiquing they use comes off very very easily?, and it does(con or not?) i had a cane that had antiquing and it turned my hands black, but after it leveled out it was fine. you know they always slap so much on to fill in the design that almost certainly more then half they put on will rub off. i have rubbed off some already. hence it would not rub off like wow, i had to use my nail. no way does it show like scratches on the samsung leather case. either way the extra antiquing will no matter what fade away over time and settle down to where it should be. i still think it will look good. at the same time the leather is much more scratch resistant then the latter. and the design and the look really grew on me. now on to the sides. the power button and volume are labeled with symbols and i like it even though i will never look at it. what else i like is that they are tpu like the rest of the sides. the tactile of the buttons are sturdy then again not too stiff not too mushy. then there is a bonus or an achilles heal; you move down the same side as the buttons and find a wrist strap punch out so you can add a wrist strap. have not tested it, seems like it should be worthy of use and not fearing. the bonus is removing the phone from the case, it does not shoot out like it does with the samsung leather case does. still it holds it in better. this is where i tell you that the jjnusa case has way better screen protection that leaves a better feel in the hand. the samsung leather case has a squidgy spongy top and bottom. the bottom is already warped and i never used it; i just put it on a few times and took it off. also a fail for the bottom bumper is the difficulty to remove the spen without nails. the jjnusa case is cut out just right and since it is thinner and more stiffer in a good way you can press your thumb or finger and hear that satisfying click to eject it. with that said the top and bottom bumper are raised higher then the samsung to protect the screen. the samsung case is more flush and flimsy.
i am a happy camper and if it fairs well i will update to 5 stars from 4, but i am really thinking at the price to slap down for another. as we all know leather cases do not last as long as other types
the reason i gave it 4 stars is i never really heard of JJNUSA till i saw them on etsy.com and since they where based in china i thought meh. then i thought to ebay's third party cases and said but leather? does not smell much like leather, oddly that is how saddles with the same type of leather smells. or it could be the antiquing they used and the shipping package. it was not shipped in a box or cheap plastic, it was in a cloth sleeve in a sealed padded envelope. JJNUSA do claim Oregon origins... yeah right etsy.com says ships from china.
i have played around with plenty of cases and phones in cases so it's not like i only have really had the note 20 ultra... just do not get one of them ultra thin all tpu cases. i have one for my lg g4 and only really protects the sides and back. busted the screen.
I have already dropped it having it about 3.6 feet drop going swap when it landed on its' back side. my heart sunk, but the case did its' work and saved it. a plus for the case. it was not dropped it was knocked down from a propped up position onto a hard wood flooring

Categories

Resources