Related
Hi everyone,
I have this phone SGS i9000 but i am constantly running out of memory. Now i got the new Sims game which uses so much ram... Many times the device just starves for ram and reboots itself...
Is it possible to add more HARDWARE ram to this device?
I use Darky roms on my device and checked if i can enable some sort of swap but it is not possible or reasonable...
DaveBG said:
Hi everyone,
I have this phone SGS i9000 but i am constantly running out of memory. Now i got the new Sims game which uses so much ram... Many times the device just starves for ram and reboots itself...
Is it possible to add more HARDWARE ram to this device?
I use Darky roms on my device and checked if i can enable some sort of swap but it is not possible or reasonable...
Click to expand...
Click to collapse
it's almost impossible without soldering knowledge and a LOT of investigation
just forget a bout it
How would you add this to the PCB? I don't think there is any space left. This is not plug and play, more an embedded device. And how about the other hardware? You also need additional controllers and such things.
--> Impossible.
If you want extra ram you have to buy a new phone
What about swap memory?
hm.. i9000 is realy a low ram device.. i sell my sgs and buy a sgs2 .. a great device
my girlfrend have also 500mb ram device, she use "rammanager root" (search @play-store) it have nice settings and work realy good..
try the demo/trail.. use hardcore game mode for the sims maybe it helps a little bit
Gesendet von meinem GT-N7000 mit Tapatalk
Nope, 329MB is user accessable, 128MB is reserved for the graphics card. 55MB is inaccessible because it prevents the device from freezing up when ram is near full.
I will never buy device with less then 2GB of RAM anymore then!
Give the poor device a break, its old already.
Mate I'm running a tsunami ROM in my sgs and it has an 392mb of ROM. And this solved all my ram problems
Tried zRam?
I have an S plus (nearly the same) and i have 358mb of RAM..
Wtf guys this was posted in March, why did you revive this thread?
Sent from my GT-I9000 using Tapatalk 2
DaveBG said:
Hi everyone,
I have this phone SGS i9000 but i am constantly running out of memory. Now i got the new Sims game which uses so much ram... Many times the device just starves for ram and reboots itself...
Is it possible to add more HARDWARE ram to this device?
I use Darky roms on my device and checked if i can enable some sort of swap but it is not possible or reasonable...
Click to expand...
Click to collapse
Hi,
Replying really late , but there is a possible way >> check below -
What advantages of increasing ram on Galaxy S
Running multiple number of application at background.
Games will run smooth without any lagging.
Clear the ram memory to make your device faster.
How to Get More Ram on Galaxy S Cyanogenmod CM10 Android 4.1.1 Jelly Bean and CM 9 ICS 4.0.4 Custom ROM.
Make sure that your custom rom is loaded with devil kernel or not. For that you can check Go to Settings->About Phone. Scroll down there you can see kernel version of present rom.
Note: So if your custom rom is loaded with different kernel then you need to change it into devil kernel version.
1. Download below zip files based on your Android OS.
For ICS get here.(file name Devil3_1.0.3-ICS_i9000_CFS_BLN_CMC_20120724.zip and you can also check latest kernel version and download it)
For JB get here. ( file version 1.0.4)
2. Copy the zip file into phone sd card.
3. Turn off the device and boot into recovery mode. For that you need to press and hold Volume Up + Home + Power button together.
4. When you enter into clockworkmod recovery mode. Select the “install zip from sd card” choose the kernel zip file which you copied earlier in your phone sd card storage.
5. The kernel flashing process will take 1 min. After that reboot the device. That’s it done now your device is fully working with devil kernel.
Note: The Above process is only for who don’t have devil kernel in their Custom Rom. If you’re custom rom is already loaded with devil kernel that you can avoid above process.
Follow below steps:
1. Download devil kernel config app from Google Play here or you can get apk from here.
2. After installing the app on Galaxy S device. Go to app list section there you can see an icon with devil logo and of that app is devil kernel configure.
2. Open the application there you can get Ram Settings Option.
3. Click on it and it will show you three options of ram CM9 368 MB, XL 391 MB and last one big mem 403 Mb. Select Big mem 403 MB to make it done.
4. On the top right side. Click on setup and it will ask you to save the ram settings.
5. When you finalized the settings it indicates to restart the phone in order to make the changes.
6. After rebooting the device. Open the task manager there you will get 403 MB of Ram.
Finally you unlocked more ram on Galaxy S Device running Cyanogenmod 10 Android 4.1.1 Jelly Bean ROM.
Rgds,
Kaustav.
You can use swapper from the Google play.
Swapper create a file .swap on your sdcard and this is the RAM :fingers-crossed:
I have samsung galaxy s plus, cyanogenmod 10-20121226-ivendor-alpha6-ariesve, android version 4.1.2, kernel version [email protected] #112...how can i install this devil kernel to increase memory ram to 403? Forgot to mention that i have JellyBean
Bughyee said:
I have samsung galaxy s plus, cyanogenmod 10-20121226-ivendor-alpha6-ariesve, android version 4.1.2, kernel version [email protected] #112...how can i install this devil kernel to increase memory ram to 403?
Click to expand...
Click to collapse
If you do install that kernel you brick your phone. Check the Samsung galaxy s plus section please
Verstuurd van mijn GT-I9001 met Tapatalk
mendozza2000 said:
You can use swapper from the Google play.
Swapper create a file .swap on your sdcard and this is the RAM :fingers-crossed:
Click to expand...
Click to collapse
This is not really a viable option...
The flash drive is infinitely slower compared to RAM.
Any game demanding more RAM than can be accessed without writing to/from swap would be unplayable.
Sent from my GT-I9000 using xda premium
Rom: Mackay rom 4.9.14 (4.4.4 kitkat)
Kernel: 3.0.101-KK44-x-aries-cma
Ram: 415MB
Lack of RAM is what made me upgrade from this glorious phone to the S4.
As time went by, Android apps got bigger and heavier, making the Galaxy S unusuable alas.
hi guys how r u doing?
i have upgraded my cellphone to ICS and i face this problem which my PC cant recognize the SC card it just shows the internal sd alone without the external sd?
another issue that my gallery dos not show my pic's nether my videos "that installed to the external sd" ...?!!!
plz show me how 2 deal with it..
regards..
What are you using ICS ?
Reflash the rom with a wipe!
If that doesn't work then give us more information like what you were on before?
And how you came to ICS.. Method used wipe no wipe etc.. Did you restore backups?
What Rom are you using?
i think its CNA-1.4.0-galaxysmtd_2...
i came from GB I9000XXJVU " as it weriten in its file"
plz gays ineed that cernal that can remove all kernels to go withe new ones .... coz i got this problem the network signal has gone all by suden
All ics rom have same issue except one ...................................they r not built to read memory card.........only DARK KNIGHT 4 can read memory card but DARK KNIGHT 4 IS FULL of bugs......................................................................
nikhilonlive said:
All ics rom have same issue except one ...................................they r not built to read memory card.........only DARK KNIGHT 4 can read memory card but DARK KNIGHT 4 IS FULL of bugs......................................................................
Click to expand...
Click to collapse
Hmm....can you explain more when you say all ICS rom have the same issue?
I have both my SGS(512mb, yes I know, small) and Tab P1000(4gb) on ICS, and both are not Dark Knight rom...both seems to read the memory card just fine when I mount them as USB storage to my computer... I see both rom and even if within the device it self...I can access them no problem.
Every ICS ROM can read the uSD... Except AOKP I think.
Envoyé depuis mon GT-I9000 avec Tapatalk
thx guys bout now i have another problem plz help after i flashed my cellphone with semaphore ICS kernel the network signal became stronger just for 12 hours but after that the signal disappeared .. i flashed my galaxy to 2.2 ,2.3.6 and CM9 but the problem still "no change"???!! plz guys help.... now i'm withe 2.2 and the signal came back but this time its too weak?? waiting for your replaying
note : my cellphone was locked and i unlocked it with Galaxy S Unlock.. works fine just for 2 weeks then this problem appeared...
and plz i need that tool which can remove all kernels... kernel cleaning script for samsung galaxy s i9000 2.2
regards
plz guys i need your help
not for me
i have been running dark knight since uploaded and ive had few issues nor bugs as for external xd card it can be found in file manager press mnt then emmc and there it is dark knight rocks
nikhilonlive said:
All ics rom have same issue except one ...................................they r not built to read memory card.........only DARK KNIGHT 4 can read memory card but DARK KNIGHT 4 IS FULL of bugs......................................................................
Click to expand...
Click to collapse
Hi
I'm really trying to increase the Internal storage of a Galaxy mini phone but I can't.
My specs are:
- Galaxy Mini GT-S5570
- Recovery: Clockworks Recovery 5.0.2.8
- CM 10.1 ROM
- Baseband: S5570XWKQ5
- 4GB SD Card
What is the best way to increase the internal storage of the phone with the SD Card?
I want to increase it to 1GB. I had tried Link2SD, it cam move some apps to the SD Card, but I really want to increase the internal storage, since it remain as 178MB and no matter how many apps I move it always consumes the internal storage.
I had following some tutorials, but are more focused on gingerbread roms or non rooted phones, and I didn't get any good results. Can you suggest me the best way to accomplish this?
I had partitioned the SD-Card, mounted /data and /system on the Clockworks recovery, but I still can not increase the internal storage size.
Any links and recommendations are welcome
Thanks in Advance.
Search all threads before posting dude.... Go to themes and apps section and see the thread named.... INT2EXT+... It's my thread only... Works for CM10.1.
Sent from my GT-I9300 using Tapatalk 2
ashu.bigsmoke said:
Search all threads before posting dude.... Go to themes and apps section and see the thread named.... INT2EXT+... It's my thread only... Works for CM10.1.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I will check this one:
http://forum.xda-developers.com/showthread.php?t=1926399
I'm also checking this one, seems to be more usefull.
S2E for CM10.1
http://forum.xda-developers.com/showthread.php?t=2098841&page=2
Thanks
Hi guys,
I've been battling this GT-S5830V for 2 days:crying:... every thing has been a problem and it's the "V" in the model that's causing it from what I've read...
Android version 2.3.6 / Baseband version S5830VDULJ2 / Kernel version 2.6.35.7 [email protected]#1 / Build number GINGERBREAD.DULJ2
I've tried later roms and soft bricked it, it won't even let me put in CWRif I try too install that from the SD card it comes up with a status 7 error tmp/sideloader/ package....
Internal memory nearly full and want to partion my 16GB sd card and use link2sd to free up more memory . If I use Rom Manger to partion the sd card it crashes and re boot.
Is there a nice CyanogenMod Rom out there for this or other ideas welcome thanks....
I think that you own a GT-S5830i as base rebamed into GT-S5830V. That's why if you tried to install rom made for GT-S5830 you got into soft brick. Sto trying to flash rom or packages not made for your Ace or you'll brick it. Also I think so because only GT-S5830 came out with Gingebread. Look better around the web
Inviato dal mio GT-S5830
Mag107 said:
Hi guys,
I've been battling this GT-S5830V for 2 days:crying:... every thing has been a problem and it's the "V" in the model that's causing it from what I've read...
Android version 2.3.6 / Baseband version S5830VDULJ2 / Kernel version 2.6.35.7 [email protected]#1 / Build number GINGERBREAD.DULJ2
I've tried later roms and soft bricked it, it won't even let me put in CWRif I try too install that from the SD card it comes up with a status 7 error tmp/sideloader/ package....
Internal memory nearly full and want to partion my 16GB sd card and use link2sd to free up more memory . If I use Rom Manger to partion the sd card it crashes and re boot.
Is there a nice CyanogenMod Rom out there for this or other ideas welcome thanks....
Click to expand...
Click to collapse
You would have got an Answer if you posted this question in the Q & A section ...Questions shouldn't go in General section.Your are spamming the General section .. so,just have a look at the FORUM RULES or SECTION RULES .... better luck next time
>>>>>>>>>>>>>>REPORTED<<<<<<<<<<<<<
Thank you,
P.007
Q&A for [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Memory leak?
First of all thank you very much to everybody who has been taking apart of developping this rom. It works generally really well. However my SGS has developped some sort of memory leak. During usage it starts litle by litle to loose amount of available memory and at the same time the amount of preloaded apps to memory is also shrinking(according to settings). Eventually available memory goes under 50Mb and phone slows down to unusable. Restart fixes the problem. Sotimes it works days or even a week sometime less.
This same problem aready existed with he origial rom(2.2.1). Eaven after a factory reset it only worked well a couple of hours. Updated with odin to 2.3.6 but touchwiz launcher was freesing all the time. Installed CM11 trough CM9 and formatted system and wiped caches before C11 . Everyting seems to work well but the original problem still remains. Although it now works much longer than with the original rom.
Hardware problem? Some app causing this(only apps running all the time is whatsapp and smooth calendar(according to settings))? Time to buy a new phone?
viber
my viber dont work after install gapps
how i can fix this problem ?
getting status 0 error
hi,
i have sgs 1 i9000 international version
after flashing from stock kernel/rom android 2.3.6 to Semaphore_kernel_JVT_1.8.0 for root, i've got cm 9 (cm-9.0.0-galaxysmtd.zip) with Semaphore_ICS_1.3.0. if i try to go higher cm 10-10.2 or cm 11 i get error status 0 after tyring to install from sd card the zip. tried redownloading the zip. using different version from cm site.
still using semaphore kernel with cwm tried all versions installed with odin for JB for cm10 and KK for cm 11. still i get status 0 at install.
done the wipe cache dalvik and factory reset every time before install.
usually to escape the bootloop and reboot i flash the Semaphore_ICS_1.3.0 again as my rom remains unchanged(hopefully ) after the failed installs. isn't my device compatible with cm10-11. do i need another kernel/cwm version?
CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
any one please help me to get CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
newguysgsi9000 said:
hi,
i have sgs 1 i9000 international version
after flashing from stock kernel/rom android 2.3.6 to Semaphore_kernel_JVT_1.8.0 for root, i've got cm 9 (cm-9.0.0-galaxysmtd.zip) with Semaphore_ICS_1.3.0. if i try to go higher cm 10-10.2 or cm 11 i get error status 0 after tyring to install from sd card the zip. tried redownloading the zip. using different version from cm site.
still using semaphore kernel with cwm tried all versions installed with odin for JB for cm10 and KK for cm 11. still i get status 0 at install.
done the wipe cache dalvik and factory reset every time before install.
usually to escape the bootloop and reboot i flash the Semaphore_ICS_1.3.0 again as my rom remains unchanged(hopefully ) after the failed installs. isn't my device compatible with cm10-11. do i need another kernel/cwm version?
Click to expand...
Click to collapse
So now when you have CM9, you should flash CM10.2. It is normal that it first warns, as system partition will be enlarged.
So in fact you must flash it three times and reboot. First time it will only warn of data lost due to upcoming repartition. Second time it will only update recovery to CWM 6.0.4.5. Third time it will flash ROM and after that you must reboot the device.
After being booted into the OS once, you can install CM11. Recovery versions older than CWM 6.0.4.5 or TWRP 2.6.3.1 can not flash KitKat.
tetakpatalked from Nexus 7 flo
---------- Post added at 11:30 PM ---------- Previous post was at 11:27 PM ----------
yasvi9 said:
any one please help me to get CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
Click to expand...
Click to collapse
You are in totally wrong thread here, this is for Samsung phone i9000, Galaxy S, first version.
Find threads for your Tab, they have there also much nicer ROMs than Cyanogenmod.
tetakpatalked from Nexus 7 flo
Cannot go into CW recovery mode to load Cyanogenmod
Posted in wrong thread, long night, sorry
cm12 ????
Hello guys! This is my first post here. I couldnt read all 300+ pages thats why i wanted to ask you. I read only positive comments about this rom but I can not se anyone having Bettery drain problem. I installed the ROM 2 days ago and the battery is just draining so fast. For example yesterday I took my phone off the charger at 11:00am and until 04:00pm it had 15 percent battery remaining with only little using and browsing the web for like 5-10 minutes. I can't be the only one having this problem. In the settings I see the Google play services, android system and display are having the best percentage. Please give me some answer or solution to this. I cant use my phone for just few hours a day.
Problem with virginmobile after cm11 install
My apn is set to ee carrier, instead of virginmobile and my carrier shows as orange - uk carriers btw. I know vm piggyback on ee network but when I search for carriers hardly any show up. Is this a known problem and is there a fix (modem flash or other).
Is the nightly 11 version smoother when compared to the stable 10.2.1? What are the main bugs, if any?
Is there any way to make art runtime to work? I'm using the latest nightly but it stucks in bootloop each time i select art
Problem with touch-input
I have a question concerning a bug I am experiencing. Often I am not able to make any touch-command on the right wing of the screen, about 1cm, this is especially annoying when it happens during typing. I did not experience the same bug on the original firmware, I believe. The occurence is not bound to any special app, it even happens on the Home screen.
Is this a known bug and is anyone experiencing the same? Any suggestions what causes this?
Is there a way to increase the RAM and speed up the phone?
So I installed this ROM (11-20311118-UNOFFICIAL-galaxysmtd which is one of the older versions of CyanogenMod 11) on my Samsung Galaxy S i9000, but I encountered a few issues:
- I occasionally lose the Wi-Fi connection, and although it does reconnect itself in a short time, there is a problem with some online games — when the connection is lost, the game is lost which really bothers me.
- Some of the apps that seek a lot RAM memory to be used are really slow-running, like for example Snapchat — the back camera can barely be used and the snaps need much time to open.
- The screen can be unlocked without having to slide, that can be done by only pressing the button on the left side of the home button, which is probably a minor issue.
- Sometimes the phone just bricks when I get a call and I can't answer it, which is one of the major issues.
So, I wanna know if there is a way to fix these issues and maybe a way to increase my RAM memory or get Snapchat to work smoothly. Also, I wanted to ask if some of the newer versions of CyanogenMod 11 (KitKat 4.4) or any other ROM, like Jelly Bean 4.3 or the SlimCat ROMs, can fix any of the mentioned issues. What is the best ROM for my Samsung Galaxy S i9000?
Thanks in advance!
Deleted
Why was this deleted?
tetakpatak said:
Deleted
Click to expand...
Click to collapse
I really need help with this, why would you delete it?
xtremeaptitude said:
I really need help with this, why would you delete it?
Click to expand...
Click to collapse
LOL I have deleted my own post that I wanted to write initially in the development thread (by mistake posted here)
tetakpatalked from N7100
tetakpatak said:
LOL I have deleted my own post that I wanted to write initially in the development thread (by mistake posted here)
tetakpatalked from N7100
Click to expand...
Click to collapse
Oh, ok, lol. Sorry, I'm new here. So, can anyone help me with this?
xtremeaptitude said:
Oh, ok, lol. Sorry, I'm new here. So, can anyone help me with this?
Click to expand...
Click to collapse
OK, mate.... you seem to be nice fellow, so I will try to help, answers in order of your questions:
if you have dirty flashed CM11 build (over older version without formatting /data and /system): did you try pawitp's reset of wifi settings from the bottom of the OP in CM11 thread? Otherwise also changing wifi region might help (settings/wifi/advanced)
the i9000 has indeed only total 512 MB memory, of which some 364 MB can be used normally. Well, you can increase these by flashing in recovery mode zips of Semaphore kernel for KK (3.4.3) and right after that BigMem libs for KK from Mackay KK ROM Thread. Then enable in the app "Semaphore Manager" (Play Store) BigMem option, reboot, and you will have by default 407 MB memory.
I fail to understand your last question: do you mean that the phone freezes, reboots, or "brick"? Bricking would mean that your OS fails and you have to flash ROM again or restore backup??
Good morning guys.
I use Mia ROM rooted fw 2.2.1 on my Galaxy SL i9003.
Can i flash directly this ROM on my device to update it or there are other best light ROM for my device?
Thank you
Inviato dal mio Zp 998 utilizzando Tapatalk 2