Related
Hello, following all the threads here i cannot find the latest & greatest stock rom
i have seen that the latest is 10e is that true?
i am running V10b + bb 20110614.
i cannot use the lg tool anymore so i got no problem re-flashing the question flash it with what version?
thanks.
Hi,
I believe 10e is the same as 10c, just localized by Vodafone.
You should look at the release dates to figure which one is the most recent.
How about 10d? Is it any different from 10c.
I am having sprodic behavior on 10c
Where can we find d version the latest I got and running now is c and its on kernel dirty...
Also I noticed that the bb is really bad with c version...
Sent from my LG-P990 using XDA App
They are all here
http://forum.xda-developers.com/showthread.php?t=1035041
Thanks but I got this link euro open ends with c... the question is where can I get d or e euro open
Does such a version even exsist ?
Sent from my LG-P990 using XDA App
shpapy said:
Thanks but I got this link euro open ends with c... the question is where can I get d or e euro open
Does such a version even exsist ?
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
The newest ROM in EU is v10c.
LG is using different letters in other nations... Confusing...
o.k, so this is what i run now, good to know that iam on the latest.
i changed the BB to 20110614 its really bad sitting in the same location in my office i dont get 3g with 20110614 and with the previous one i do get 3g.
shpapy said:
o.k, so this is what i run now, good to know that iam on the latest.
i changed the BB to 20110614 its really bad sitting in the same location in my office i dont get 3g with 20110614 and with the previous one i do get 3g.
Click to expand...
Click to collapse
Be sure to flash the matching RIL.
BritSwedeGuy said:
Be sure to flash the matching RIL.
Click to expand...
Click to collapse
i just smartflash it no ril
shpapy said:
i just smartflash it no ril
Click to expand...
Click to collapse
RIL is part of the full official ROM (not just BB).
i did smartflash with v10c and then i upgraded the BB to the latest.
no i checked the RIL and its still old so iam doing the RIL update via CWM
checking....checking....checking....flashed, restarting phone.... hoping to get it up.....
boot animation completed.....so far so good....yahooo phone is up still no radio
got radio.... same service level
checking RIL.... 0622 (10c - europe open) before hand i had 0414 spain vodafone
I think the Baseband is much important in a Rom. I tried Lots of Baseband for me the best XXKPK. Someone telling XXKPG and the other one XXKPM etc. For example my phone connect with 11 Mpbs with KPM , 36 Mpbs with KPK in my garden same position.
Is there any app or something to try and get real results?
This should not be something relatively or the Baseband is not personel for me good and for other bad.
Lets make something with this Subject together.
Regards.
battery drain is also very dependent on baseband. so do you want the one with best battery drain, best reception or best balance?
the baseband of the latest firmware which is via kies available in you region should be the best
for me the lastest XXKPM it has not changed to a lot in the several signals, the only obvious change is the 2G that now it goes very faster also in the switch
CastagnaIT said:
for me the lastest XXKPM it has not changed to a lot in the several signals, the only obvious change is the 2G that now it goes very faster also in the switch
Click to expand...
Click to collapse
I can confirm that, esp. for 2G
also battery drain is bit better now (before stock and KPK)
and call quality is better and that is what I like most of the new baseband. Less noise.
EB2012 said:
I can confirm that, esp. for 2G
also battery drain is bit better now (before stock and KPK)
and call quality is better and that is what I like most of the new baseband. Less noise.
Click to expand...
Click to collapse
i just flashed XXKPM, i find the signal become weak and unstable =.=...
the value of signal is always change too much...from 10asu to 23asu...=.=
pp910317 said:
i just flashed XXKPM, i find the signal become weak and unstable =.=...
the value of signal is always change too much...from 10asu to 23asu...=.=
Click to expand...
Click to collapse
in which country do you use it ?
texten said:
the baseband of the latest firmware which is via kies available in you region should be the best
Click to expand...
Click to collapse
So, the Baseband is change by country. Therefore XXKPM is really bad for me..
My matter is, There is no firmware for Turkey. Im searching for 3 days but couldnt find anything.
Joy` said:
So, the Baseband is change by country. Therefore XXKPM is really bad for me..
My matter is, There is no firmware for Turkey. Im searching for 3 days but couldnt find anything.
Click to expand...
Click to collapse
use a baseband from neighbours country/region or from a branded firmware of your region
base bands
texten said:
use a baseband from neighbours country/region or from a branded firmware of your region
Click to expand...
Click to collapse
Where can i find all baseband file download
zzozozo said:
Where can i find all baseband file download
Click to expand...
Click to collapse
you can try some basebands here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ROM_parts
and you can flash a stock rom to get another baseband:
just register and search here for i9001:
http://www.sammobile.com/firmware/
or download here without account:
https://samsung-updates.com/device/?id=GT-I9001
or use this firmware download tool:
http://fus.nanzen.se/
EB2012 said:
in which country do you use it ?
Click to expand...
Click to collapse
china
Many time after update baseband is necessary to wipe data to solve battery drain
GT-i9001 Shadow ROM 2.0.5
Skyhigh Undervolted
ICS Theme
smartassv2 sio i/o
tweaked governator
best modem
texten said:
you can try some basebands here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ROM_parts
and you can flash a stock rom to get another baseband:
just register and search here for i9001:
http://www.sammobile.com/firmware/
or download here without account:
https://samsung-updates.com/device/?id=GT-I9001
or use this firmware download tool:
http://fus.nanzen.se/
Click to expand...
Click to collapse
tnx i just download the kpk version and install it (do i need any cash reset?)
pp910317 said:
china
Click to expand...
Click to collapse
KPM and the whole new stock ROM is made for regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
All Stock Rom's:
http://forum.xda-developers.com/showthread.php?t=948790
The usual modems are in the bottom of the 1st post. Worked all fine for me
For you, ZSJV1,,
I'm using XXKPM and it works like a charm for me. Don't know if it's a placebo or not, but i feel the wifi signal better when i'm far from the router, and also 2G is faster. Also calls are better. Less noise.
Sent from my GT-I9001 using xda app-developers app
XXXKPM works good for me, but is very similar to KPL baseband
Da tapatalk
Baseband problem on i9000. running I9000XXJVU
Joy` said:
I think the Baseband is much important in a Rom. I tried Lots of Baseband for me the best XXKPK. Someone telling XXKPG and the other one XXKPM etc. For example my phone connect with 11 Mpbs with KPM , 36 Mpbs with KPK in my garden same position.
Is there any app or something to try and get real results?
This should not be something relatively or the Baseband is not personel for me good and for other bad.
Lets make something with this Subject together.
Regards.
Click to expand...
Click to collapse
I lately installed 4.1.2 X-Bean 3.0 , kernel version 3.0.45-Semaphore_JB_2.3.0. I have no network (Mobile network not available). I live in Macedonia T-mobile sim card. How do i fix this problem.
I had cm10 4.1.2 and everything worked fine...
Thanks
Hi there, i read few threads about baseband problems. i found this in older post (not my phone lol)
Details of my phone are
1) Model Number : LG P970
2) Android Version : 2.2.2
3) Baseband Version : XMM6160
4) Kernel Version : 2.6.32
5) Build Number : FRG83G
6) Software Version : LG-P970-V10d
Click to expand...
Click to collapse
so i guess this answer one of my question, that xmm6160 is froyo baseband the v10x or whatever. ??? is it correct ??
if it does than it would answer my second question, that i can flash any BB no matter if its from froyo, gb, ics and it should work with the phone. am i correct in this or not???
so now the question is, if my phone have xmm6160 BB and everything works fine except the auto time and date. should i flash v30 baseband? you think its worth it ?? is there a way for me to backup my current BB or i need togo the long way and extract it from the KDZ.
last question: if LG didnt release ICS in my region will the v30 BB work in my region, as far as i understand it may not work properly ?? am i correct ??
thanks
sol
deleted
Try it... If that dont work, reflash your v10 baseband. That will take 5min
I suggest to download Clock Sync. Uncheck automatic time in option and use clock sync
Mini Franki said:
Try it... If that dont work, reflash your v10 baseband. That will take 5min
I suggest to download Clock Sync. Uncheck automatic time in option and use clock sync
Click to expand...
Click to collapse
thank you for your reply, i will try clock sync, about the flashing of BB im guessing that the post i found is indeed a v10 BB bcs the guy said that is phone is still in stock and unrooted, if i extract the v10e KDZ, is there a way to verify the BB version before i flash it??
BB version can be different for each country. A v10e from USA or v10e from EUR will have a different bb
If you want the good BB, take it from your country stock rom. Just need to flash the .fls file
Mini Franki said:
BB version can be different for each country. A v10e from USA or v10e from EUR will have a different bb
If you want the good BB, take it from your country stock rom. Just need to flash the .fls file
Click to expand...
Click to collapse
am i correct that all custom roms do not have a bb ? if that is so, then my phone has the xmm6160 which is suppose to be from my old stock v10e
and if im correct about the above, than i should not even try to flah v30 bb, cause my country has only v10x version and not even v20 so ill stick to current BB i got.
and if im wrong can xmm6160 be a gingerbread BB?? that was flash when i had zeus 6.4 or marvel v9 cm7 or cici??
how can i verifay the .fls file that is xmm6161 file or maybe different ver. ??
thanks so much for clearing this stuff for me. :good:
Exactly, custom rom dont have BB. You are on which rom?
That depend... Im on IZS with the EUR baseband and automatic time work perfectly(im from canada). V30 bb fixed auto time problem. But im not sure if v30 bb will be good with your v10d rom. I can only say, try it
Mini Franki said:
Exactly, custom rom dont have BB. You are on which rom?
That depend... Im on IZS with the EUR baseband and automatic time work perfectly. V30 bb fixed auto time problem. But im not sure if v30 bb will be good with your v10d rom. I can only say, try it
Click to expand...
Click to collapse
right now im on marvel v11 and auto time date not working, but all else including gps work fine. and i have xmm6160 bb .
Oh!
Flash v30b baseband, that will fix your auto time problem. Sorry i was sure you was on v10d lol
Mini Franki said:
Oh!
Flash v30b baseband, that will fix your auto time problem. Sorry i was sure you was on v10d lol
Click to expand...
Click to collapse
lol, my old stock was v10e, israel region. do you know by any chance if i should try and use the v30b open europe or it doesnt matter which region .fls as long as its v30b ?? cause israel didnt get the ics update so no v30 for us, only the froyo.
thanks again brother
AW: [Q] XMM6160 baseband
cookiepuppy said:
lol, my old stock was v10e, israel region. do you know by any chance if i should try and use the v30b open europe or it doesnt matter which region .fls as long as its v30b ?? cause israel didnt get the ics update so no v30 for us, only the froyo.
thanks again brother
Click to expand...
Click to collapse
Cant you use the UAE version?
Sent from my LG-P970 using xda app-developers app
Well I'm kind of a noob , what's UAE version? If this can work I'm sure gonna try.
Sent from my LG-P970 using xda app-developers app
AW: [Q] XMM6160 baseband
cookiepuppy said:
Well I'm kind of a noob , what's UAE version? If this can work I'm sure gonna try.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
United arab emirates. Look into v30 thread in general, someone posted, there is an arab ROM now.
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
United arab emirates. Look into v30 thread in general, someone posted, there is an arab ROM now.
Click to expand...
Click to collapse
i just flashed the v30b open eur. baseband and when i got to phone setting->about phone-> baseband version. it seems that it was flashed ok, now its not unknown the ver. no' is 1035.23_20110405. s/w ver. p97030b-eur-xx
when i check the lg hidden menu->version->baseband shows as XMM6160.
is it ok? does it suppose to be like that ??
phone was rebooted only and no factory reset was done by SFT.
AW: [Q] XMM6160 baseband
cookiepuppy said:
i just flashed the v30b open eur. baseband and when i got to phone setting->about phone-> baseband version. it seems that it was flashed ok, now its not unknown the ver. no' is 1035.23_20110405. s/w ver. p97030b-eur-xx
when i check the lg hidden menu->version->baseband shows as XMM6160.
is it ok? does it suppose to be like that ??
phone was rebooted only and no factory reset was done by SFT.
Click to expand...
Click to collapse
If it works properly,especially in calls, it s fine
Sent from my LG-P970 using xda app-developers app
Well, I tested calls, gps, WiFi, SMS and everything works fine.
Thanks guys for your help.
Sent from my LG-P970 using xda app-developers app
Hey,
first of, sorry if this has already been asked (and answered..) But I tried my best searching all the sub-forums.
Anywho.
I'm not sure if I am imagining this or not, but after updating to 253 my wireless and cell reception has become worse. Albeit I have quite poor reception in the basement, but the phone looses mobile and/or wireless connection all the time (and I'm positive it didn't do that before, at least).
I have tried both the Indian version and the Swedish version, but they both have the same baseband, i.e 9x15A-ACEFWMAZQ-30110041-23. I am located in Norway, but I figured the baseband will at least be the same for both Sweden and Norway(?). I have not looked at the 'Nordic' version yet tho.
I have not checked if the baseband of 434 and 253 actually differ, but I'm thinking they do. Currently I'm running Carbonrom, so the question is, is it possible to flash just the baseband of 434 onto Carbonrom (provided they're not the same that is..) and should I try to find the Norwegian-specific ftf?
I've been doing nothing but flashing different roms these last days and I think I'm going to cough up hairballs if I have to re-install and customize the rom to my liking, yet again. So I just want to be sure before doing anything (un)risky..
regards,
me
Yes you can flash the baseband separately with flashtool.
And yes 434 has different baseband than the new update.
Sent from my C6603 using xda premium
gm007 said:
Yes you can flash the baseband separately with flashtool.
And yes 434 has different baseband than the new update.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Well I tried flashing both a baseband from 434 UK version and 434 Swedish version, but it has not changed.. Is there anything else than flashing the baseband from flashtool I should know about?
avelon said:
Well I tried flashing both a baseband from 434 UK version and 434 Swedish version, but it has not changed.. Is there anything else than flashing the baseband from flashtool I should know about?
Click to expand...
Click to collapse
Yes you done it correctly but you wont see the difference in "about phone".you need to change some system files to get the right info but not necessary.
All you have to do now is checking if you have better signal and connectivity or not.
Sent from my C6603 using xda premium
Today I downloaded the latest German stock ROM (700 MB) just to get this little thing (8 MB). So I thought, maybe save somebody the trouble and share it. The V30A Germany Baseband (see attachment). Flash it with AIO-Toolkit (option 7).
It is recommended to use a baseband which was made for your country/phone. So Germans (with ICS/JB) should probably use this one.
Check with your IMEI which baseband (ROM) you would normally receive:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI (Replace IMEI at the end of the URL with your IMEI - it's under your battery.)
Hummmmm...here you are Germany BaseBand v30B
You have the complete firmware on my signature!!...
trocopassu said:
Hummmmm...here you are Germany BaseBand v30B
You have the complete firmware on my signature!!...
Click to expand...
Click to collapse
There is no V30B for Germany. Not even for Europe Open. I don't know where you got that from.
http://lg-phone-firmware.com/index.php?id_mod=3
JUMPhil said:
"...There is no V30B for Germany. Not even for Europe Open..."
Click to expand...
Click to collapse
OK! ... If you say so!! ...
http://www.smartphenom.com/2013/01/lg-firmware-update-central-beta.html
In germany we have a v30B but only for vodafone but you can use it as normal with every provider
trocopassu said:
OK! ... If you say so!! ...
http://www.smartphenom.com/2013/01/lg-firmware-update-central-beta.html
Click to expand...
Click to collapse
This is most probably V30B Spain, as that's the only Vodafone V30B ROM available. There are no Vodafone ROMs for Germany or Europe.
We have a thread for that baseband already.
sgspluss said:
In germany we have a v30B […]
Click to expand...
Click to collapse
Where? How do you get it from LG?
sgspluss said:
[…] but only for vodafone but you can use it as normal with every provider
Click to expand...
Click to collapse
You can also use a Chinese baseband in Germany. But that's not recommended.
JUMPhil said:
This is most probably V30B Spain, as that's the only Vodafone V30B ROM available. There are no Vodafone ROMs for Germany or Europe.
We have a thread for that baseband already.
Click to expand...
Click to collapse
No. .. they are different, as you yourself can observe through the LINK I posted!
But for me everything is perfect ... I use v30B Germany and I am Very Happy with it ...
---------- Post added at 03:29 PM ---------- Previous post was at 03:24 PM ----------
JUMPhil said:
"...You can also use a Chinese baseband in Germany. But that's not recommended..."
Click to expand...
Click to collapse
I used for a long time baseband v30B India and never had problems!
My LG has always worked perfectly and without any errors ...but, obviously, was certainly not recommended by the brand! Which is not equivalent to say no funcion as well or even better?!...:good:
trocopassu said:
No. .. they are different, as you yourself can observe through the LINK I posted!
But for me everything is perfect ... I use v30B Germany and I am Very Happy with it ...
Click to expand...
Click to collapse
The firmware is not available from your link. But I downloaded your attachment and compared it to my V30A Germany and Vodafone V30B Spain.
V30A Germany is completely different to yours. Vodafone V30B Spain has exactly the same size of 8,351,116 bytes like yours, but has a different MD5 for me.
trocopassu said:
I used for a long time baseband v30B India and never had problems!
My LG has always worked perfectly and without any errors ...but, obviously, was certainly not recommended by the brand! Which is not equivalent to say no funcion as well or even better?!...:good:
Click to expand...
Click to collapse
I was also always using basebands from Korea or such. There were always problems for me, but I can't allocate them. But I think if you flash the baseband that the manufacturer would flash on your phone, you're on the safe side.
JUMPhil said:
The firmware is not available from your link. But I downloaded your attachment and compared it to my V30A Germany and Vodafone V30B Spain.
V30A Germany is completely different to yours. Vodafone V30B Spain has exactly the same size of 8,351,116 bytes like yours, but has a different MD5 for me.
**_**_**
I was also always using basebands from Korea or such. There were always problems for me, but I can't allocate them. But I think if you flash the baseband that the manufacturer would flash on your phone, you're on the safe side.
Click to expand...
Click to collapse
Strange!?! ... Now I just check LINK's and everything is fine!
As for the firmware, it is possible that the Baseband's are identical in size, but the firmware is different in all ... I think the v30B Spain is higher than v30B Germany ... now I'm at work and can not see it .
I know I've posted something like that, I'll see if I find the post and inform.
How to flash baseband one another Country, I do not say that you're right there, on the contrary, what is certain is that I never had problems.
firmware LG
JUMPhil said:
Where? How do you get it from LG?
You can also use a Chinese baseband in Germany. But that's not recommended.
Click to expand...
Click to collapse
Hi Friends
Here you will find all the firmware LG
http://www.smartphenom.com/2013/01/lg-firmware-update-central-beta.html
as seen looking spain and germany have 2 firmware V30A and v30b/vodafone both
reading the links exhaust servers they are official LG
closed practice I think ...
v30b spain and germany are good for everyone in europe (released on different dates)
Please see this thread
http://forum.xda-developers.com/showthread.php?t=2015630&page=40
sorry for bad english ...
PinoDG said:
Hi Friends
Here you will find all the firmware LG
http://www.smartphenom.com/2013/01/lg-firmware-update-central-beta.html
as seen looking spain and germany have 2 firmware V30A and v30b/vodafone both
reading the links exhaust servers they are official LG
closed practice I think ...
v30b spain and germany are good for everyone in europe (released on different dates)
Please see this thread
http://forum.xda-developers.com/showthread.php?t=2015630&page=40
sorry for bad english ...
Click to expand...
Click to collapse
Perfect!
Was already mentioned here, (But Many Thank's)
http://forum.xda-developers.com/showpost.php?p=45938273&postcount=4
Does the v30b bb fix the bsod problem when plugging the phone into USB while screen is off? V30A works perfectly for me.
Sent from my LG-P990 using xda app-developers app
mas2112 said:
Does the v30b bb fix the bsod problem when plugging the phone into USB while screen is off? V30A works perfectly for me.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Again????!...OMG...WTF!!...
ENABLE 2nd core!!!!!...On KKernel setup.
LG O2x[P990]@TapaTalk4HD v4.1.3
Thanks for repeating this for me. My Google search didn't find me this info!
Let me reiterate this so it's easier for people to search for this info.
So if you get a BSOD (Black Screen of Death) or crash when plugging in your phone (LG Optimus 2x P990) to your PC computer USB port, and you have the Kowalski Kernel (KK) installed, the solution is to turn on or enable 2nd core auto hot plug in the Kowalski Manager.
I flashed firmware and baseband v30b Germany. I'm on tonyp build 18 the ROM. When I go about baseband version it says February13 2013 ? Is that
OK ?
g3ar said:
I flashed firmware and baseband v30b Germany. I'm on tonyp build 18 the ROM. When I go about baseband version it says February13 2013 ? Is that
OK ?
Click to expand...
Click to collapse
Yeah!...That's correct
LG O2x[P990]@TapaTalk4HD v4.1.3
so that means , that v30b germany isnt "more fixed" its just relased later ?
I have BSOD on Stock rom and i can't enable second CPU, is some solution for this?
lolypop000 said:
I have BSOD on Stock rom and i can't enable second CPU, is some solution for this?
Click to expand...
Click to collapse
Baseband version?
Sent from my LG-P990 using XDA Premium 4 mobile app