Hey everyone, I'm experiencing a big of a problem.
I have t5353++( http://forum.xda-developers.com/wiki/Chinese_Clones_T5353++_DualOS ). I installed the Android only rom from http://www.solonomi.com/rom/T5353/07-13-T5353-2.1.rar website and now it wont turn on...Have you any ideas on how to fix the problem or if there is a way of booting up the phone so I can put the old OS back on.
Rx:Tx:Gnd
This is some pictures of my motherboard :
h**p://imageshack.us/photo/my-images/818/imag0009gh.jpg/
h**p://imageshack.us/photo/my-images/17/dsc01666eu.jpg/
Can anybody tell me how to find (Rx:Tx:Gnd) points on motherboard and flash software to unbrick my phone.
Hi All,
Australin Optus GT-I9305 (4G/LTE Ver).
Android 4.1.2
Download mode: Binary dowload 3 - Current binary Official - System status Official
I tried to root my SGS3 today with Odin however I used the wrong root from my old Note 2 which caused the screen to do weird things and then the screen would not boot up or respond. I have reinstalled the stock software on it with Odin and now the phone starts up but still does not respond to my touch's.
I can boot into recovery and download mode no problem. I have cleared the cache and performed a factory reset still no response from screen. I am stuck in the first set up screen atm the menu key, back & home key all make sounds when I touch them.
If I unroot the phone will it fix this issue? if so how?
Is the phone gone/dead/unfixable?
Or can I use USB OTG to control the phone so I can use triangle away and return for warranty?
I also think USB debugging is off as well as I cannot get into the phone.
Any help will be really appreciated thanks guys.
Although extremely similar in hardware the screen's digitalizers are different causing issues like this instead of a plain brick that you would get if you tried a I9300 firmware. Try using Samsung Emergency Restore on Kies.
If that doesn't work then you may have to send it into a repair center as you could have, put bluntly, ****ed it.
Sent from my GT-I9305 using xda premium
I've read of several cases where people have used Roms or recoveries intended for the Note 2 on their S3 and it literally fries the screen.
It allows too much current through or something like that.
I think you will need to get a new screen mate.
Hello!
I just wonder what could cause hard brick in my Note. I had the official ICS and flashed the official JB 4.1.2 (N7000XXLSZ_N7000OXXLS4_XEO) with no errors at all. The phone worked fine half a day then I noticed strange pop up information on the screen. I can not remember what it was becouse of a foreign language (spanish as far as I remember) and it was something like sim related block. I could only make an emergency call. I removed the battery, put it in again, saw samsung logo and then the phone turned off. That is it. It won't turn on anymore. Looks like dead. I tried to charge it with no effect. No download mode or recevery mode available. Odin doesn't see it, neither does PC.
The only thing I could have done wrong was flashing XEO over PLS csc. Does it matter regarding the brick?
Thanks for any advices.
wishkil said:
Hello!
I just wonder what could cause hard brick in my Note. I had the official ICS and flashed the official JB 4.1.2 (N7000XXLSZ_N7000OXXLS4_XEO) with no errors at all. The phone worked fine half a day then I noticed strange pop up information on the screen. I can not remember what it was becouse of a foreign language (spanish as far as I remember) and it was something like sim related block. I could only make an emergency call. I removed the battery, put it in again, saw samsung logo and then the phone turned off. That is it. It won't turn on anymore. Looks like dead. I tried to charge it with no effect. No download mode or recevery mode available. Odin doesn't see it, neither does PC.
The only thing I could have done wrong was flashing XEO over PLS csc. Does it matter regarding the brick?
Thanks for any advices.
Click to expand...
Click to collapse
time to claim warranty..
Hello guys,
I've got a not so big, but very irritating problem:
My display does not turn and I can not calibrate it...
I have already flashed the KDZ files, did a factory reset but it helpen nothing.
My phone is rooted and unlocked.
Hope you can help me soon.
Ultracoolman
Hello, I'm newbie here and
first of all Happy new year and Merry Christmas to ALL!!! and wish the best in 2018
I bought Samsung galaxy note 4 (SM-N910T3) on the eBay and it was running on android 7.0.1 nougat (taken from Verizon phone) and was locked to T-mobile, some features wasn't working, wasn't working S pen, on the phone was loaded TWRP recovery. I bought T-mobile unlock code on eBay and its required the stock ROM to unlock phone from T-mobile network, then I decided to flash the stock ROM and flashed it with N910T3UVS3EQB1 stock ROM with odin, found both of them on this forum. phone was unlocked, TWRP recovery was removed from phone and its boot as stock factory phone. I was made calls and everything works great until I was install twrp apk from play store, after this phone was reboot and will not want to work with touching by fingers on screen, only works with S pen ,
after this issue I was flashed phone again in odin with this stock rom but nothing else ......
what can I do ??? how i can decide this problem ??? how to recover touch screen.... :crying::crying::crying::crying:
pleasee anyone help meee
uesiba said:
Hello, I'm newbie here and
first of all Happy new year and Merry Christmas to ALL!!! and wish the best in 2018
I bought Samsung galaxy note 4 (SM-N910T3) on the eBay and it was running on android 7.0.1 nougat (taken from Verizon phone) and was locked to T-mobile, some features wasn't working, wasn't working S pen, on the phone was loaded TWRP recovery. I bought T-mobile unlock code on eBay and its required the stock ROM to unlock phone from T-mobile network, then I decided to flash the stock ROM and flashed it with N910T3UVS3EQB1 stock ROM with odin, found both of them on this forum. phone was unlocked, TWRP recovery was removed from phone and its boot as stock factory phone. I was made calls and everything works great until I was install twrp apk from play store, after this phone was reboot and will not want to work with touching by fingers on screen, only works with S pen ,
after this issue I was flashed phone again in odin with this stock rom but nothing else ......
what can I do ??? how i can decide this problem ??? how to recover touch screen.... :crying::crying::crying::crying:
pleasee anyone help meee
Click to expand...
Click to collapse
It sounds like a faulty touch screen digitizer
If it does not work with re-flashing stock with Odin, then it's a hardware problem
ShaDisNX255 said:
It sounds like a faulty touch screen digitizer
If it does not work with re-flashing stock with Odin, then it's a hardware problem
Click to expand...
Click to collapse
how fix hardware problem??? maybe not flashed properly ??? ...
uesiba said:
how fix hardware problem???
Click to expand...
Click to collapse
Replace screen
ShaDisNX255 said:
Replace screen
Click to expand...
Click to collapse
if digitizer is dead why s pen is working ???
uesiba said:
if digitizer is dead why s pen is working ???
Click to expand...
Click to collapse
Try this, maybe it'll help: https://forum.xda-developers.com/showpost.php?p=62388407
Use google, this problem is not uncommon. I found this just inputting it on google, I'm sure you can find many more posts with your problems.
S-Pen uses a different digitizer than your normal touch digitizer
One can go bad but the other would still be working, it is totally possible.
Unfortunately, I have never seen any place where they will send you any digitizer separate from the screen, that is why I suggest a full replacement
THANK YOU MAAAANNNNN
it helps my note thank you agaiiiiiiiiiiiiiin very much
yeessssssssss :good::good::good::good::good::good::good::good::good:
ShaDisNX255 said:
Try this, maybe it'll help: https://forum.xda-developers.com/showpost.php?p=62388407
Use google, this problem is not uncommon. I found this just inputting it on google, I'm sure you can find many more posts with your problems.
S-Pen uses a different digitizer than your normal touch digitizer
One can go bad but the other would still be working, it is totally possible.
Unfortunately, I have never seen any place where they will send you any digitizer separate from the screen, that is why I suggest a full replacement
Click to expand...
Click to collapse