So i was flashing euroskank from rom manager, it said file is bad so i wiped data and all that and rebooted it seemed fine then the screen goes black, now its stuck in boot loop cm7 logo.
- Power button broken
- Volume buttons work
So when I go in hboot i cant press power to fastboot
Since my phone is in boot loop i can't enable debugging to use adb on my pc.
Help?
Related
Whenever I turn off my phone, or reboot it, it boots into a frozen bootloader. I can't move around or power off the device. If I plug in the USB cable and use fastboot, I can boot the phone (e.g. fastboot reboot), and then it will go into the ROM i have loaded (CM 6), but the ROM has "safe mode" at the bottom left.
What in the world is going on here?
It might be one of your hard buttons getting stuck (VolumeUp or VolumeDown - the one that's calling the bootloader when combined with power button). You could adb logcat the boot, and search for the failures in the CM boot log, that might also pinpoint the guesswork.
Well, it loads into the bootloader even if I tell it to reboot via the ROM. So I am not holding down any keys.
Also, in the boot menu that it boots into, my recovery menu option is missing.
I do seem to be able to reboot directly into recovery (I am running v1.5.3)
doing a logcat when the device is in the bootloader gets me nothing as it just sits there waiting for the device.
running logcat while the thing is booting into CM shows:
/WindowManager( 127): SAFE MODE ENABLED (menu=0 s=0 dpad=0 trackball=1)
does this mean my trackball is stuck?
And while i can get into RA via the reboot to recovery option in CM, I can't actually do anything (pressing the trackball does nothing).
Yep, your trackball is stuck.
the phone does not turn on, stays in the loop motorola logo and does not turn on the device.
the power button not working.
since i got the phone (used), no longer had boot, but worked normally after having applied an update.zip by one recovery reboot apk, he started getting looped on motorola logo
android 2.1 i think
any ideia? tks!
ok, i fix it.
the problem was the power button aways pressed. because that, i cant get on boot scrren! ^^
tks!
I just tried to install CM 10.1.3 on my Motorola Atrix HD.
I forgot to wipe data and cache before installing the ROM, and now it is stuck in the boot animation.
When I press the power and volume keys down together, it takes my phone to a black screen, and when I press them again on the black screen it gives me a brief menu that says
"Normal power up"
"Recovery"
"AP Fastboot"
"Factory"
and another one I can't recall.
This screen times out in about 3 seconds. and regardless of which item from the menu I select, it still shows my boot logo, then the CM animation. I cant boot into fastboot or recovery, and I can't find anything good online to help me.
Help! What do I do?
Hi. There's a catch about the bootloader mode (the menu you're describing). You have to press vol down to scroll down to Recovery, and then press vol up to select it. Pretty dumb IMO but that's how it is.
If you're completely sure you can't get to recovery using this method, you could try going into download mode and factory reset through fastboot:
Here's the guide to get fastboot working:
http://forum.xda-developers.com/showthread.php?t=2226527
To go into download mode, shut down the phone completely, hold down the power button and volume down buttons. Then let go of the power button while still holding down the volume button and it should boot to fastboot (download) mode. The connect usb cable to your pc.
You can do a factory reset (format data and cache partitions) using fastboot -w.
Btw, is there any particular reason for going CM10? CM11 is just so much better now, nightlies are pretty good (12/20 has been rock solid for me, even with ART enabled).
Good luck!
hi ,
i have a problem with my p7l10 it started with bluetooth problems (it wasnt able to start) and now i cant boot it to system i can only boot to recovery (i had TWRP but i flashed original one in order to update to b853 btw that update always failed) so it boots to recovery but then it freezes screen so i cant move with vol +/- even power button does nothing i can only force turn off it and then i can only turn it into frozen recovery or get stuck when booting system
when i connect to pc via USB cable when i open adb
adb devices is empty but sometimes i can hear win pluggung in sound so... no idea what´s going on.
can any1 help me?
Thanks in advance
After flashing AEX ROM phone hangs on boot screen. I can't force it to shut down, I have to wait until battery drains. Then I connect the charger, phone immediately boots up, here we go again...
I can't use newflasher.
Brick?
Use Sony Emma.
My phone is also bootlooped after i failed to flash the software.
I don't remember but maybe hold volume up and power button and the phone vibrates 3 or 4 times and after turning off.
Brick is not likely. Plug the phone into a PC, hold power button and up volume until it vibrates then hold the volume up until the blue led shows, meaning you entered fastboot mode. Then open a terminal for adb, wipe with fastboot commands and flash another rom of your choice.
I can flash zip using fastboot??
Code:
fastboot flash system rom.zip
Somehow key combo worked and I got into twrp and flashed rom