[Q] Galaxy Mini Bricked With Black Screen - Samsung Galaxy Mini

Recently I bought my phone and installed ROM manager which i then proceeded to install CWM recovery and since there was no choice for my phone i chose the first one. It then asked me to reboot and i accepted and then it went all black out. It could not accept any key combination.Then after resurrection it could enter download mode but would end up not flashing but with an error message BML FORMAT FAIL-90220000. I then flashed arm11boot for gt s5570 and it flashed successfully but on restarting it went to another problem-bootloop. I tried re-flashing but it it came up with the bml error again, so i again flashed arm11boot and it went black dead..... it wont enter download mode but can enter recovery because when i press the recovery key combination it installs around 4 drivers but none is odin's. the screen lights up when i switch it on and can charge the battery but whenever i try to flash any rom it gets stuck at setup connection. Please help me ..........

Oh... C'mon ! We already talk about this... No ROM Manager for Mini ! :silly:
NEWBIE & NOOBS don't be such Lazy Buns !
If you want resolve this problem, Go to SSC (Samsung Service Center) and act KNOWN Nothing about flashing, rooting, etc.

Related

Galaxy S stuck in CWM bootloop! HELP!

Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
You will hadware buttons failure when you flash a i9000 ROM on an Anycall M110S ( Korean Galaxy S) , so I am curious are you sure your phone is not an Anycall M110S? since you also getting Anycall boot screen...sounds odd, that i9000 will do that.
For USB connection problems , just try link on Quick Fixes and Solutions link below
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
Go back your original firmware...
Any updates to this?
I am having a similar situation. I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000. It is now stuck in recovery mode. I tried doing factory reset and wiping the cache and dalvik cache and tried reflashing. Everything goes fine but gets stuck in the recovery mode - more correctly in download mode but the download mode logo flashes twices and enters to recovery mode.
Any possible solutions to get me out of this mess?
Thanks,
Sid
your problem will be solved with this post:
http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
Edit : above url is for S+ your device is S , sorry .
Thanks, but anything similar for Galaxy S? And remember my download mode does not stay, if flashes twice and runs into recovery mode. So if your solution is something to do in recovery mode it will be helpful (or if your solution is to first make me stay on download mode and then flash something using odin I will be thankful)
Regards,
Sid
sidswami said:
I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000.
Click to expand...
Click to collapse
Check your Model, Anycal does not make GT I9000, it makes only M110S and firmwares / solutions for them vary.
If you have Anycal M110S visit PIT STOP link below to solve your problems
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
you can get a rescue kit from My Android Collections and or a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.
worked for me
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
beben3 said:
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
Click to expand...
Click to collapse
Glad that worked for you, but I for some reason can't be so lucky. I tried to also flash CWM 10 but after the home key not working I decided to flash Slim Bean and now I am stuck. My phone isn't even recognized by Odin any more and I have tried different USB ports and even my laptop with Heimdall. I don't know what to do at this point, but any kind of suggestions would be great. Usually when I get stuck I just flash back to Stock and start all over with a new ROM or kernel but I have no idea where to go from this point.

[Q] Device boot loop on samsung logo...

Hi
I have a samsung galaxy ace S5830 mobile. I had previously rooted my phone and successfully installed Apocalypse rom on it about 6 months back. Last week however my phone suddenly starts behaving weirdly. Here are the symptoms:
1) Booting doesn't progress beyond samsung logo screen, it is either stuck there or restarts continuously
2) Unable to enter recovery, I have CMW installed but am unable to access it as the phone wont go beyond the start up screen inspite of holding
(vol up + home + power)
3) Tried flashing both single package stock rom/ multiple package rom using odin, Phone does go to download mode and is detected by odin but unable to flash the rom's the flashing process gets stuck at <1> odin mode.. check plcatform verification.(Firmware - India version)
I found many posts on phones getting stuck on boot loop but flashing via odin seems to solve all of them. This however is not working in my case.
It would be great if any one can help me with this problem or let me know if I need to take my phone to the service center,
Thanks,
Vivek
viveknabhi said:
Hi
I have a samsung galaxy ace S5830 mobile. I had previously rooted my phone and successfully installed Apocalypse rom on it about 6 months back. Last week however my phone suddenly starts behaving weirdly. Here are the symptoms:
1) Booting doesn't progress beyond samsung logo screen, it is either stuck there or restarts continuously
2) Unable to enter recovery, I have CMW installed but am unable to access it as the phone wont go beyond the start up screen inspite of holding
(vol up + home + power)
3) Tried flashing both single package stock rom/ multiple package rom using odin, Phone does go to download mode and is detected by odin but unable to flash the rom's the flashing process gets stuck at <1> odin mode.. check plcatform verification.(Firmware - India version)
I found many posts on phones getting stuck on boot loop but flashing via odin seems to solve all of them. This however is not working in my case.
It would be great if any one can help me with this problem or let me know if I need to take my phone to the service center,
Thanks,
Vivek
Click to expand...
Click to collapse
If you have adb drivers installed in your system, you can try "adb reboot recovery" to get into revcovery.. And do you have the usb drivers installed in your system ?? Maybe that is why odin is failing..
viveknabhi said:
Hi
I have a samsung galaxy ace S5830 mobile. I had previously rooted my phone and successfully installed Apocalypse rom on it about 6 months back. Last week however my phone suddenly starts behaving weirdly. Here are the symptoms:
1) Booting doesn't progress beyond samsung logo screen, it is either stuck there or restarts continuously
2) Unable to enter recovery, I have CMW installed but am unable to access it as the phone wont go beyond the start up screen inspite of holding
(vol up + home + power)
3) Tried flashing both single package stock rom/ multiple package rom using odin, Phone does go to download mode and is detected by odin but unable to flash the rom's the flashing process gets stuck at <1> odin mode.. check plcatform verification.(Firmware - India version)
I found many posts on phones getting stuck on boot loop but flashing via odin seems to solve all of them. This however is not working in my case.
It would be great if any one can help me with this problem or let me know if I need to take my phone to the service center,
Thanks,
Vivek
Click to expand...
Click to collapse
Since, you've entered download mode, ur device can't be switched on either normally or in recovery. Also, I doubted ur recovery key combo (correct one is HOME+POWER).
Try with this Odin & Cooper
http://db.tt/jgXJcjzG
Sent Via XDA™ Premium
viveknabhi said:
Hi
I have a samsung galaxy ace S5830 mobile. I had previously rooted my phone and successfully installed Apocalypse rom on it about 6 months back. Last week however my phone suddenly starts behaving weirdly. Here are the symptoms:
1) Booting doesn't progress beyond samsung logo screen, it is either stuck there or restarts continuously
2) Unable to enter recovery, I have CMW installed but am unable to access it as the phone wont go beyond the start up screen inspite of holding
(vol up + home + power)
3) Tried flashing both single package stock rom/ multiple package rom using odin, Phone does go to download mode and is detected by odin but unable to flash the rom's the flashing process gets stuck at <1> odin mode.. check plcatform verification.(Firmware - India version)
I found many posts on phones getting stuck on boot loop but flashing via odin seems to solve all of them. This however is not working in my case.
It would be great if any one can help me with this problem or let me know if I need to take my phone to the service center,
Thanks,
Vivek
Click to expand...
Click to collapse
Same problem guy.
Apcalypse rom, about 6 mounts

Samsung Galaxy Ace S5830 got bricked, cant

First off, upon trying to install the MindCr_Rom_v2.8 ROM on my Ace, installation went good. After installation went good and completed as it should. Got CWM already. when rebooting that's it phone got bricked. I cant go to Recovery or Download Mode, phone doesn't power on, when inserted USB cable for charging charging icon doesn't show up, NOTHINGis happening, any ideas, solutions please please please!
androlinu said:
First off, upon trying to install the MindCr_Rom_v2.8 ROM on my Ace, installation went good. After installation went good and completed as it should. Got CWM already. when rebooting that's it phone got bricked. I cant go to Recovery or Download Mode, phone doesn't power on, when inserted USB cable for charging charging icon doesn't show up, NOTHINGis happening, any ideas, solutions please please please!
Click to expand...
Click to collapse
I'm facing the same problem... from what i know after i asked some people in another forum they told me this rom MindCr_Rom_v2.8 ROM is for s5830i, that's why after reboot nth appear, i'm still looking for way to enter recovery mode... i m stuck as well... anyone can help????
Thanks
If you can enter download mode, flash a stock ROM via Odin.
If not, too bad, amigos
Sent from my pet - Megatron™
Did you install it using CWM or ROM Manager?
Never use ROM Manager on the Ace! If you did, your phone is hard-bricked.

(Solved) recovery not opening/odin stuck at setup connection..

hi i really really really need your urgent help :crying: i have a galaxy mini s5570 i rooted it succesfully with upd_1.zip file and then i tried to install the cwm 5.0.2.8 it looked like it actually installed in recovery but when i tried to boot the phone it just stuck at Samsung logo, i tried to open recovery by (power and home buttons) but recover doesn't show up !! only black screen and when i put it to charge it only shows that black screen too
so i put it into download mode and tried to flash stock rom with odin but it never gets completed always gets stuck at (setup connection..)
i tried 3 computers, odin 1.85 and 3.04, 2 usb cables but i didn4t solve this problem !
i managed to solve the problem using Odin4.3 :victory:

s3 mini does not turn on!!

Hello
I have a mini S3 and went to install CyanogenMod on it but the ODIN stopped in the middle of the installation, causing the Android stay corrupted and whenever I called this message appeared: "firmware upgrade encountered an issue. Please select recovery mode in kies and try again "
So I downloaded the original S3 mini according to my country and everything and I install ROM, well, the installation took place correctly but leave it stuck in boot start screen showing the phone model, then I install the ROM again but the ODIN stopped again and there came the problem ...
it does not turn on the power switch and the only way to 'make it light up the screen' is connecting the USB, but when I plug the cable it gets on and off the screen repeatedly at the "firmware upgrade encountered an issue. Please select recovery mode in kies and try again " until I remove the cable and the phone turns off completely.
I hope you guys understand my problem and can help me please.
Already grateful : )! (sorry my english)
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Can't power on and enter on recovery menu
JanniekM00 said:
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Click to expand...
Click to collapse
I can't do wipe/factory reset in the recovery menu because i can't power on at all. It keeps only blinks (on and off) all the time when its plugged on PC or charger.
Thanks very much for your support!
Did you see the s3 mini logo if you turn on the phone. If you see this works download mode then? if not then your phone is bricked....
When you try and turn the phone on does it display the phone name? Or does nothing happen? If you get nothing then I'm afraid it's bricked. I'd try a different computer, different lead and possibly a different windows os. Then try and flash a stock rom using odin and be 100% sure it's for the model of the phone you have as there's loads of variants of the s3. Other than that, I can't help you any further
Hi everyone,
At first sorry for my english. I`m Dawid from Poland
OK, so i have gt-i8190N and when i trying to turn it on i see only white screen. Screen is ok because i can run phone in download mode.
Of course everyone says " so try to flash rom by odin" but i can`t because in odin i have error "FAIL Get PIT for mapping There is no PIT partition". I was try to flash rom with PIT file (to i8190N and i8190) but without succes.
Are anyone have the same problem?
I was try OneClick also.
Thanks for any answer.

Categories

Resources