Related
Hello everyone.
I hope that you can help me with my mistake. All started yesterday unlocking succesfully the bootloader and rooting my device, also successfully. After that i tried to swap the internal SDcard with the external SDcard. So far it seemed that it worked good, but after the mandatory reboot the homescreen looked kind of weird. No clock and all was zoomed out.
So I tried to install a normal rom with RSD Lite and at step 3 of 11 it stopped with a failure. i noticed to late that I had should choose the 42'er for the EU, because I used the 32' even EU.
After this mistake my razr is a prisoner of its AP Fastboot Flash Mode (secure boot). These are the datas i can see on the display:
AP Fastboot Flash Mode (secure boot)
20.0F (sha - bdfb943)
IFWI Info:42.21
Barcode:######
Battery (okay): 4,16v (temp 37.0)
Transfer mode: USB Connected
ROM-Key: Motorola-key
And in the boot mode selection menue I'm not able to work with the volume up and down button. The is no reaction.
dismatched partion entry array crc32
Fastboot Reason: Flash Failure fastboot: max download size 100MB
USB connected (does't matter if there is a connection or not)
Getvar max-download-size
Downloading...
Flashing boot...
Booting into Recovery Mode
Does anyone has an idea How can i break out from the recovery mode an get the device to normal work?
Thank you for your time!:good:
AfrobD said:
Hello everyone.
I hope that you can help me with my mistake. All started yesterday unlocking succesfully the bootloader and rooting my device, also successfully. After that i tried to swap the internal SDcard with the external SDcard. So far it seemed that it worked good, but after the mandatory reboot the homescreen looked kind of weird. No clock and all was zoomed out.
So I tried to install a normal rom with RSD Lite and at step 3 of 11 it stopped with a failure. i noticed to late that I had should choose the 42'er for the EU, because I used the 32' even EU.
After this mistake my razr is a prisoner of its AP Fastboot Flash Mode (secure boot). These are the datas i can see on the display:
AP Fastboot Flash Mode (secure boot)
20.0F (sha - bdfb943)
IFWI Info:42.21
Barcode:######
Battery (okay): 4,16v (temp 37.0)
Transfer mode: USB Connected
ROM-Key: Motorola-key
And in the boot mode selection menue I'm not able to work with the volume up and down button. The is no reaction.
dismatched partion entry array crc32
Fastboot Reason: Flash Failure fastboot: max download size 100MB
USB connected (does't matter if there is a connection or not)
Getvar max-download-size
Downloading...
Flashing boot...
Booting into Recovery Mode
Does anyone has an idea How can i break out from the recovery mode an get the device to normal work?
Thank you for your time!:good:
Click to expand...
Click to collapse
Pretty easy to fix. Open the folder whre you have the. 32eu rom, open the.xml file with notepad and delete the line that says motoboot. Try to use RSD Lite again, and it will work
tatazeuz said:
Pretty easy to fix. Open the folder whre you have the. 32eu rom, open the.xml file with notepad and delete the line that says motoboot. Try to use RSD Lite again, and it will work
Click to expand...
Click to collapse
Hey i tried it like you told me, but now i'm on the status that RSD Lite isn't able to work with the xml file.
It works for 100 other people...u did something wrong...
Guys I cannot factory reset my phone at all! By going to settings>backup and reset>Factory data rest the phone just restarts and doesn't reset.?
By going to bootloader and into recovery mode>wipe data/factory reset says complete but when I try to wipe cache the phone reboots?
I have tried http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657 to restore stock 4.4.4 but I get message
Failed to Vaildate System Image"
in Phone "Invalid PIV signed image file"
When I reboot it is still not factory reset?
Can anyone help?
I have the same problem as found in this thread on Moto G 2013 http://forum.xda-developers.com/showthread.php?t=2770611&page=3#post58057658
Nobody? Nobody at all?
Christopher.J.M said:
Guys I cannot factory reset my phone at all! By going to settings>backup and reset>Factory data rest the phone just restarts and doesn't reset.?
By going to bootloader and into recovery mode>wipe data/factory reset says complete but when I try to wipe cache the phone reboots?
I have tried http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657 to restore stock 4.4.4 but I get message
Failed to Vaildate System Image"
in Phone "Invalid PIV signed image file"
When I reboot it is still not factory reset?
Can anyone help?
I have the same problem as found in this thread on Moto G 2013 http://forum.xda-developers.com/showthread.php?t=2770611&page=3#post58057658
Click to expand...
Click to collapse
the message is because your boot loader is locked - hence why you cant flash the stock image via adb
can you confirm you can get into bootloader mode?
My bootloader is unlocked. Bootloader reads 'state unlocked' 'status code 3'.
Install other recovery twrp with rash flasher apk
Christopher.J.M said:
My bootloader is unlocked. Bootloader reads 'state unlocked' 'status code 3'.
Click to expand...
Click to collapse
probably a corrupt download what model xt106x have you? (i.e xt1068?)
http://forum.xda-developers.com/moto-g-2014/development/recovery-images-install-recovery-images-t2987246/post57907275#post57907275 no install and flashable Custom recoveries
I can't get to the play store because of all the force closes popping up such as 'acore process' and 'google play services'. When I click okay it pops back up making it impossible to do anything.
Christopher.J.M said:
I can't get to the play store because of all the force closes popping up such as 'acore process' and 'google play services'. When I click okay it pops back up making it impossible to do anything.
Click to expand...
Click to collapse
find attached a zip (extract this to desktop)Inside is a automated bat script to reset (clear) userdata and cache via adb
must have usb debugging enabled and the Authorised (rsa key allowed) plug in usb cable with phone on normally
reefuge said:
find attached a zip (extract this to desktop)Inside is a automated bat script to reset (clear) userdata and cache via adb
must have usb debugging enabled and the Authorised (rsa key allowed) plug in usb cable with phone on normally
Click to expand...
Click to collapse
Error: Device not found. USB debugging is enabled but I got no RSA key authorization request?
Christopher.J.M said:
Error: Device not found. USB debugging is enabled but I got no RSA key authorization request?
Click to expand...
Click to collapse
Make sure USB debugging on in developer options > unlocked screen ( disable key lock) run script > if you get error look at phone screen and see if asks about rsa key? tick ok if not ticked - if not try this
disable and re- enable usb debugging > should get prompt about RSA Key, tick OK, (usb cable plugged in before you start)
OR, close command prompt. unplug cable and make sure phone screen alive (not locked) you should get a prompt when you plug cable in about allowing rsa key authorisation, tick box and ok it
re run script
or if you can get to bootloader manually I will alter script to work from bootloader
Christopher.J.M said:
Error: Device not found. USB debugging is enabled but I got no RSA key authorization request?
Click to expand...
Click to collapse
That's probably because your adb is outdated
Download Minimal ADB and Fastboot and install it.
start "Minimal ADB and Fastboot" by navigating to the Start Menu Folder you choose to create during installtion or the desktop shortcut you choose to create and selecting "Minimal ADB and Fastboot"
You should now see a command window open.
Put your device in fastboot mode and connect usb.
Now just do verify type this command
Code:
fastboot devices
the output should show something like this (your number is different)
Code:
fastboot devices
ZX1D225X69fastboot
now extract your stock rom into the directory where your command window is open and start flashing
Code:
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
reboot device
Now you should be back to stock KitKat.
Christopher.J.M said:
Guys I cannot factory reset my phone at all! By going to settings>backup and reset>Factory data rest the phone just restarts and doesn't reset.?
By going to bootloader and into recovery mode>wipe data/factory reset says complete but when I try to wipe cache the phone reboots?
I have tried http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657 to restore stock 4.4.4 but I get message
Failed to Vaildate System Image"
in Phone "Invalid PIV signed image file"
When I reboot it is still not factory reset?
Can anyone help?
I have the same problem as found in this thread on Moto G 2013 http://forum.xda-developers.com/showthread.php?t=2770611&page=3#post58057658
Click to expand...
Click to collapse
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence
---------- Post added at 11:32 PM ---------- Previous post was at 11:29 PM ----------
Christopher.J.M said:
Guys I cannot factory reset my phone at all! By going to settings>backup and reset>Factory data rest the phone just restarts and doesn't reset.?
By going to bootloader and into recovery mode>wipe data/factory reset says complete but when I try to wipe cache the phone reboots?
I have tried http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657 to restore stock 4.4.4 but I get message
Failed to Vaildate System Image"
in Phone "Invalid PIV signed image file"
When I reboot it is still not factory reset?
Can anyone help?
I have the same problem as found in this thread on Moto G 2013 http://forum.xda-developers.com/showthread.php?t=2770611&page=3#post58057658
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g-2014/development/windows-tool-moto-g-2014-xt1068-dual-t2983295 try this version for XT1068 Dual SIM
reefuge said:
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence
---------- Post added at 11:32 PM ---------- Previous post was at 11:29 PM ----------
http://forum.xda-developers.com/moto-g-2014/development/windows-tool-moto-g-2014-xt1068-dual-t2983295 try this version for XT1068 Dual SIM
Click to expand...
Click to collapse
Tried this method but it still boots up as normal. I will try this dual sim tool method now.
When I tick USB debugging, exit settings and go back in it is unticked!? :/
reefuge said:
Make sure USB debugging on in developer options > unlocked screen ( disable key lock) run script > if you get error look at phone screen and see if asks about rsa key? tick ok if not ticked - if not try this
disable and re- enable usb debugging > should get prompt about RSA Key, tick OK, (usb cable plugged in before you start)
OR, close command prompt. unplug cable and make sure phone screen alive (not locked) you should get a prompt when you plug cable in about allowing rsa key authorisation, tick box and ok it
re run script
or if you can get to bootloader manually I will alter script to work from bootloader
Click to expand...
Click to collapse
When I tick USB debugging, exit settings and go back in, it is unticked!? :/
doppelhelix said:
That's probably because your adb is outdated
Download Minimal ADB and Fastboot and install it.
start "Minimal ADB and Fastboot" by navigating to the Start Menu Folder you choose to create during installtion or the desktop shortcut you choose to create and selecting "Minimal ADB and Fastboot"
You should now see a command window open.
Put your device in fastboot mode and connect usb.
Now just do verify type this command
Code:
fastboot devices
the output should show something like this (your number is different)
Code:
fastboot devices
ZX1D225X69fastboot
now extract your stock rom into the directory where your command window is open and start flashing
Code:
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
reboot device
Now you should be back to stock KitKat.
Click to expand...
Click to collapse
Fails on first code:
C:\Users\Johann\Desktop\Minimal ADB and Fastboot>fastboot devices
ZX1D226KRZ fastboot
C:\Users\Johann\Desktop\Minimal ADB and Fastboot>fastboot oem fb_mode_set
...
FAILED (remote failure)
finished. total time: -0.000s
C:\Users\Johann\Desktop\Minimal ADB and Fastboot>fastboot devices
ZX1D226KRZ fastboot
C:\Users\Johann\Desktop\Minimal ADB and Fastboot>fastboot oem fb_mode_set
...
FAILED (remote failure)
finished. total time: 0.016s
C:\Users\Johann\Desktop\Minimal ADB and Fastboot>
Any setting I change is reset after boot. E.g if I remove screen passcode, passcode is still present after boot. Or if I turn brightness up it is returned after boot.
reefuge said:
http://forum.xda-developers.com/moto-g-2014/development/windows-tool-moto-g-2014-xt1068-dual-t2983295 try this version for XT1068 Dual SIM
Click to expand...
Click to collapse
This is the closest I have got. No fails showed up on the bat file nor on the phone, but when it reboots it is still not reset.
Christopher.J.M said:
Fails on first code:
C:\Users\Johann\Desktop\Minimal ADB and Fastboot>fastboot devices
ZX1D226KRZ fastboot
C:\Users\Johann\Desktop\Minimal ADB and Fastboot>fastboot oem fb_mode_set
...
FAILED (remote failure)
finished. total time: -0.000s
Click to expand...
Click to collapse
Hmm. Is your battery low?
The Fastboot screen shows the battery status. If its low, fastboot refuses to do anything.
doppelhelix said:
Hmm. Is your battery low?
The Fastboot screen shows the battery status. If its low, fastboot refuses to do anything.
Click to expand...
Click to collapse
Nope, battery is 75%.
Hi all,
Yesterday i flashed miui LP on my Redmi 2 Prime. In the evening i tried to flash the miui KK with fastboot rom. But ended up with unspecified error . I tried many things but no luck. Then i followed direct method and that worked. Following is the procedure.
Note:
1. This will erase all your data and internal storage so better you backup them first.
2. I'm not responsible if anything goes wrong with your device.
Requirement:
1. Minimal ADB and Fastboot
2. Fastboot rom
3. Mi Pc Suite (for drivers, you can skip if already installed drivers)
Preparing:
1. Install Mi Pc Suite.
2. Install Minimal ADB and Fastboot.
3. Extract fastboot rom anywhere.
4. Copy all the files from images folder to the directory where Minimal ADB And fastboot is installed.
for example C:\Program Files (x86)\Minimal ADB and Fastboot
Procedure:
1. Connect your phone to pc in fastboot mode,
your Pc will install some drivers automatically.
2. Go to Minimal ADB and Fastboot directory .
3. Hold shift and right click.
4. Click open command window here.
5. Enter fastboot devices command.
If you see your device name in list of devices attached in command window then your good to go.
6. Now enter the following commands given below one by one in sequence.
fastboot flash partition gpt_both0.bin
fastboot flash tz tz.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash hyp hyp.mbn
fastboot flash tzbak tz.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot flash hypbak hyp.mbn
fastboot erase boot
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash persist persist.img
fastboot flash sec sec.dat
fastboot flash splash splash.img
fastboot reboot
Or
Simply put Flash All.bat (Attached Bellow) in Minimal ADB and Fastboot directory and double click on it (No need to enter those commands). Your Devices will reboot automatically when flashing done.
congrats
Hit thanks
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
did you place all the files in minimal adb and fastboot folder?
gabika1941 said:
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
Click to expand...
Click to collapse
did you place all the files in minimal adb and fastboot folder? And what you mean by using several different rom package? This method is only for fastboot rom made for redmi 2 only. Make sure your phone is detected by PC in fastboot mode with command fastboot devices.
I have tested this method three times without any errors. You are surely doing something wrong.
screenshot
gabika1941 said:
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
Click to expand...
Click to collapse
Can you attach a screenshot of your minimal adb and fastboot folder here. Also attach screenshot of your cmd window when you face error.
rkmadotra said:
Can you attach a screenshot of your minimal adb and fastboot folder here. Also attach screenshot of your cmd window when you face error.
Click to expand...
Click to collapse
i have a similar problem :
C:\Xiaomi\wt86047_pro_images_6.3.25_20160307.0000.16_5.1_cn_ee14351bfb\images>fastboot.exe flash partition gpt_backup0.bin
target reported max download size of 268435456 bytes
sending 'partition' (16 KB)...
OKAY [ 0.005s]
writing 'partition'...
FAILED (remote: failed to write partition)
finished. total time: 0.018s
C:\Xiaomi\wt86047_pro_images_6.3.25_20160307.0000.16_5.1_cn_ee14351bfb\images>
Click to expand...
Click to collapse
I have a 2014813 , was using a moded 2014811 rom on it. Kept crashing wanted to reflash , and installed TWRP on it , that said can't mount partitions and now i can't flash neider the 811 or the 813 roms to it . Just keeps saying error writing to partition . I can attach a screenshot of the Miflash tool if it helps. And above is the Command prompt error.
Pushing just 5 img files didn't worked for me and was stuck on MI logo, but pushing all files was reviving my phone!
Thank you very much for this method!
sir, my Redmi 2 is bricked
when I am trying to flash this the error messages is coming like
cannot load " gpt_both0.bin".
like these and so on. when I am using flash all.bat same messages is coming and then after erasing boot the phone reboots with black screen .
sir please help me
your help will be highly appriciated.
[email protected]
My phone stucks on Mi logo what will do
yeah!!!!!!!!!!!! after trying many other methods like recovery through adb ,command prompt,mi flash tool,mi pc suit...... i downloaded atleast 4-5 roms to just confirm that whether flash tool has some problem or the ROMs..........but if something worked after constantly trying many things in past three days it is this method.......seriously...
FYI this is the way i used it and u should probably use the same way
-> download MI flash tool (google it)
->install(in C
->download any compatible ROM for ur phone
->open :- C:\Program Files\Xiaomi\MiPhone\Google\Android
->paste all the contents of image folder from the ROM into this android folder
->then download this Flash All.bat from here and extract it...
->put your phone in fastboot mode ->connect it via usb
->then double click your Flash all.bat file-> give it some time->once finished ur device will start automatically
->after 10 mins or so disconnect ur phone from pc ... give it 4-5 mins , ur phone will be out of bootloop and u will be awarded with a new MIUI
Yes! It worked for me as well.
Thanks for your steps.
(FYI this is the way i used it and u should probably use the same way
-> download MI flash tool (google it)
->install(in C
->download any compatible ROM for ur phone
->open :- C:\Program Files\Xiaomi\MiPhone\Google\Android
->paste all the contents of image folder from the ROM into this android folder
->then download this Flash All.bat from here and extract it...
->put your phone in fastboot mode ->connect it via usb
->then double click your Flash all.bat file-> give it some time->once finished ur device will start automatically
->after 10 mins or so disconnect ur phone from pc ... give it 4-5 mins , ur phone will be out of bootloop and u will be awarded with a new MIUI )
and it worked good.
My Mi Account was locked and could not connect to internet at all.
I had tried using Flash tools, PC suite - Flash methods and nothing worked. I had spend more time to fix my mobile in all these ways.
But this method is awesome. Only took around 15 minutes to completely flash my mobile.
After flashing the mobile, I am able to connect to internet and I have also created a new Mi-Account and linked my G-Mail account to it.
Am super happy now.
Thanks a lot.
However I would wish to add another details to the above setps:
The Flashall.BAT too needs to be extracted and copied into the same folder where the contents from ROM's Image folder were copied.
awesome bro thankyou very much.it's working absolutely well:good::good:
Tried a similar method and got my redmi2 prime hard bricked. Can someone tell me the test points in the device 2014818?
Thanx This works for me. successfull to flash my redme 2
Simply put Flash All.bat (Attached Bellow) in Minimal ADB and Fastboot directory and double click on it (No need to enter those commands). Your Devices will reboot automatically when flashing done.
congrats
Hit thanks[/QUOTE]
Will this work for Redmi note 3 Snapdragon??
Hello
I am stick in bootloop with my Redmi 3 (after trying Flashify).
Tried the above method with high hopes, as I have been trying everything else also with no luck.
I have downloaded a ROM for my device of course.
It all seems to go well until I launch the Flash_All.bat
Then the DOS commands are executed in 5 to 10 secs, and my devices reboot, but in a bootloop again
I got a breif view at the DOS commands, and it basically, at several lines says somthing, like: "failed to write, device is locked"
see attached sreen shot
does this mean my problem has no solution and I can simply throw away my device?
Thanks
rkmadotra said:
Hi all,
Yesterday i flashed miui LP on my Redmi 2 Prime. In the evening i tried to flash the miui KK with fastboot rom. But ended up with unspecified error . I tried many things but no luck. Then i followed direct method and that worked. Following is the procedure...
Click to expand...
Click to collapse
You solved my problem :good:
Thank you buddy..... This method works
Fastbooting method did not bring back my stock model number that is hm2014818. It changed to 2014817 when i flashed miui 8 64bit rom for redmi 2. Now i am not able to go back to my original model number even by fastboot method. Any help please??
will the flash all.bat support on other mi device's??
stuck at erasing user data
flashing stuck at flashing userdata
When I flash TWRP
It shows me this
Code:
PS C:\adb> fastboot devices
******** fastboot
PS C:\adb> fastboot boot recovery.img
downloading 'boot.img'...
FAILED (command write failed (Invalid argument))
finished. total time: -0.000s
PS C:\adb>
and my mi a2 turned in to black screen and shows "press anything to shutdown" on the upper left corner
if I didn't use fastboot device first it shows me this
Code:
PS C:\adb> fastboot boot recovery.img
downloading 'boot.img'...
FAILED (command write failed (Too many links))
finished. total time: 0.003s
PS C:\adb>
I try to use another way
Code:
PS C:\adb> fastboot devices
******** fastboot
PS C:\adb> fastboot getvar current-slot
getvar:current-slot FAILED (command write failed (No such file or directory))
finished. total time: 0.000s
PS C:\adb>
But without fastboot devices
Code:
PS C:\adb> fastboot getvar current-slot
current-slot: a
finished. total time: -0.000s
PS C:\adb> fastboot flash boot_b recovery.img
sending 'boot_b' (41314 KB)...
FAILED (remote: unknown command)
finished. total time: 0.000s
already changed 3 different cable and try 8 usb port on my computer
tried adb installer 1.3 and 1.4.3
updated my Mi Usb Driver
I have never flash any a/b slot device before I have no idea what's going on
any my mi a2 still can boot into system and stock recovery
any solution please
sorry for my bad English.
-------------------------------------------------------------
UPDATE!!
I just use a USB2.0 Port (USB HUB)
and I got the problem solved!!!!
You are using the wrong recovery....check if developer op is on & usb debugging is enabled....also try to unlock you bootloader again......
bladehunter said:
You are using the wrong recovery....check if developer op is on & usb debugging is enabled....also try to unlock you bootloader again......
Click to expand...
Click to collapse
I'm using the TWRP For jasmine from this thread
also tried this too
I have my usb debugging on already and I also tried to lock my bootloader then unlock it again
the problem still there
(
same problem here , please help anyone
cs853120 said:
I'm using the TWRP For jasmine from this thread
also tried this too
I have my usb debugging on already and I also tried to lock my bootloader then unlock it again
the problem still there
(
Click to expand...
Click to collapse
reset your phone once then try........also try to unlock your boot loader & see if you can flash the stock rom from the official website......make sure that the entire rom file is in a folder on your desktop.......for some reason MI flash does not like long system paths.....
cs853120 said:
When I flash TWRP
It shows me this
and my mi a2 turned in to black screen and shows "press anything to shutdown" on the upper left corner
if I didn't use fastboot device first it shows me this
I try to use another way
But without fastboot devices
already changed 3 different cable and try 8 usb port on my computer
tried adb installer 1.3 and 1.4.3
updated my Mi Usb Driver
I have never flash any a/b slot device before I have no idea what's going on
any my mi a2 still can boot into system and stock recovery
any solution please
sorry for my bad English.
Click to expand...
Click to collapse
Hi there.
I have the same problem. Can't do anything with my phone on any USB 3.0/3.1-Port on my Ryzen desktop (works neither on Win10 nor Linux Mint). I have to use my old Win8.1 Intel laptop and there everything works flawlessly but only on the USB 2.0 port. I used the same tools/commands/Mi-drivers but it only works on the laptop. Tried different drivers for MB/USB-host controller and different cables but to no avail... Connecting the phone and mtp works but no adb/fastboot.
I read on different threads that other people have the same problem with other hardware setups but most of them were able to fix it with MB drivers from the manufacturer instead of the Windows ones. Maybe that could work for you.
For now I keep the laptop around for flashing my A2....
whenever you get "press any key to shutdown" on fastboot it's because of the usb port, use usb 2.0
I have the same problem , and change to 2.0 USB Ports works! Thanks!
Did you found a solution?
Please help. Facing exact same issue. Tried all USB ports on my PC. Switched between Ubuntu and Win10. All to no avail.
It's a USB 3 problem. I had it too in my laptop. You gotta find a USB 2 port, maybe in another PC. Good luck.
Sent from my Mi A2 using XDA Labs
i was also fasing same problem so what is did is
fastboot flashing unlock_critical
then
fastboot oem edl
and flashed stock
Mi A2 Boot loop
The first thing you'll want to do here is extract the factory images archive that you downloaded from your manufacturer's website. For that part, I'd recommend using 7-Zip, as it's free and works with most archive formats , move all of the contents of the archive to the platform-tools folder inside of your ADB installation directory, then open an ADB Shell window in this folder.
Flash the system images individually. This method takes some extra work, but it can be used to un-root, update, or un-brick your device without losing existing data.
Start by extracting any additional archives from the factory images package. Sometimes, factory images packages can contain a series of three or four nested archives, so make sure to unzip all of them. From there, copy all of the image files to the main platform-tools folder—in other words, don't leave them in any sub-folders.
there are two images that you can get rid of: cache.img and userdata.img. These are the images that will overwrite your data and cache with blank space, so if you don't flash them, your existing data will remain intact.
Of the remaining images, six make up the core elements of Android: boot, bootloader, radio, recovery, system, and vendor.
The boot image contains the kernel, so if you just want to get rid of a custom kernel that's causing issues with your device, you only have to flash this one. To do that, type the following command into the ADB shell window:
//
fastboot flash boot <boot image file name>.img
//
Next is the bootloader image—this is the the interface that you're using to flash images with Fastboot commands. So to update your bootloader, type:
fastboot flash bootloader <bootloader image file name>.img
//
Once you've done that, you should reload the bootloader so that you can continue flashing images on the newer version. To do that, type:
fastboot reboot-bootloader
//
After that, we have the radio image. This one controls connectivity on your device, so if you're having problems with Wi-Fi or mobile data, or if you just want to update your radio, type:
fastboot flash radio <radio image file name>.img
//
Then there's recovery. This is something you may or may not want to flash, depending on the modifications you've made. For example, if you've installed TWRP custom recovery, flashing this image will overwrite your modification and replace it with the stock recovery interface. So if you're just updating your modded device, you should skip this one. Otherwise, if you plan to keep your phone stock and want the newer version of stock recovery, type:
fastboot flash recovery <recovery file name>.img
//
Next up is the big one: The system image. This one contains all of the files that make up the actual Android OS. As such, it's the most essential part of any update.
However you may not be updating your phone. You may just be re-flashing the stock firmware to recover from a soft brick. If this is the case, the system image is often the only image you need to flash in order to fix everything, because it contains the entirety of Android. In other words, if you flash this image and nothing else, it will undo any changes you made with root access and put everything back the way it was.
So as a cure-all in most soft brick situations, or as a method for getting the core part of an Android update, type:
fastboot flash system <system file name>.img
//
Finally, there's the vendor image. This is only present on newer phones, so don't worry if it's not in your factory images package. But if it's there, it contains a few important files, so type the following line to get this partition updated:
fastboot flash vendor <vendor file name>.img
//
After you've sent any or all of the above commands, you'll be ready to restart your device and boot into Android. To do that, type:
fastboot reboot
/
Thanks to Android gadget hacks .
P.S : Including today , it was 22nd time that i rooted , enabled camera2api .. but i think till know its useless .
After dealing with this issue for a long time I found that using a USB hub solved it for me.
This is the one I'm using: https://es.aliexpress.com/item/USB-...342.html?spm=a2g0s.9042311.0.0.1d6e63c04tJJe6
Hope this helped!
the same problem
have tried all USB port, unfortunately, no success
Hi everyone,
Today I have a big problem
I install jasmine__V10.0.8.0.PDIMIXM and after I set "fastboot oem lock" but Now my MI A2 Can't enter in OS.
I have this message on screen
"Your device has loaded a different operation system"
and another page says
"Your device software can'tbe checked for corruption. Plese lock the bootlader.
But when I check in fastboot I have bootloader locked.
Any suggestion to unlock ? I can't enter in OS.
Thanks
HELP
bladehunter said:
You are using the wrong recovery....check if developer op is on & usb debugging is enabled....also try to unlock you bootloader again......
Click to expand...
Click to collapse
Can you help me with my thread?? Thank you!
Same error.
Download TWRP and TWRP installer
DONT CONNECT YOUR PHONE!!
Put your phone in Fastboot
in cmd type
fastboot boot twrp.img (twrp name instead of twrp.img)
Then when you see <Waiting for Device> connect your phone !
Check if it's working.
This was fix for me, when I was unable to even boot into recovery.
Once you boot into recovery, wipe everything, flash twrp zip, and error should be gone
Hey guys,
same issue here but i don't have any usb2.0 port on my laptop now. Any workaround? Totally sure that i used fastboot + usb3.0 on Sony, LG, Samsung ROMs with no hassles whatsoever. Is this only happening with Xiaomi?
Cheers
When i try to boot into fastboot mode using power key and volume - key, it shows me a blank screen :crying::crying: . there is no bunny with fastboot logo. only black screen.anyone help me please.
Note: I am on pie with march update.
feroz mahmud said:
...there is no bunny with fastboot logo. only black screen....Note: I am on pie with march update.
Click to expand...
Click to collapse
Maybe you still get into fastboot mode, but screen is black due to corrupted splash partition? You can check that subj is in bootloader mode using "fastboot devices -l" from PC. If yes, you can reflash splash.img from 10.0.2.0 fastboot image.
Aerobatic said:
Maybe you still get into fastboot mode, but screen is black due to corrupted splash partition? You can check that subj is in bootloader mode using "fastboot devices -l" from PC. If yes, you can reflash splash.img from 10.0.2.0 fastboot image.
Click to expand...
Click to collapse
Will you please tell me the process of flashing splash? And where do i get this file?
feroz mahmud said:
Will you please tell me the process of flashing splash? And where do i get this file?
Click to expand...
Click to collapse
Same as all other flashing via fastboot.
The only official fastboot image for Mi A2 AO Pie available yet is v10.0.2.0 PDIMIFJ and can be found at http://en.miui.com/download-353.html or https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849.. Here in forum you can find hand-made variants of images for 10.0.3.0-10.0.7.0, but all these contain same image of splash partition as in official ROM (if any).
.TGZ and .TAR archives can be unpacked by 7z and many other programs.
Inside archive is directory called smth like "jasmine_global_images_V10.0.2.0.PDIMIFJ_9.0" containing the ready ROM image for fastboot flash.
Inside this directory there are several batch files, containing the same line for flashing splash partition:
Code:
fastboot flash splash %~dp0images\splash.img
Note that "splash.img" is foind in " \Images" subdirectory.
So, you will need:
1. Mi A2 with unlocked bootloader and critical partitions (search this forum on how to unlock) in bootloader mode, connected to USB 2.0 port in PC;
2. Working drivers and / ADB / fastboot installation.
3. "splash.img" copied into directory of working ADB / fastboot installation.
To check that requirement (1) and (2) are fulfilled, run CMD shell in directory of working ADB / fastboot installation and type
Code:
fastboot devices
If output list contains the only 1 string with ID of device (same as shown by "ADB devices -l" command in normal MTP file transfer mode), you are ready to type in commands:
Code:
fastboot flash splash .\splash.img
fastboot reboot bootloader
You are supposed to see the 'bunny' after phone reboots to bootloader mode once again. To reboot back to system just use "fastboot reboot"
If above is not helpful, bring phone to service
Aerobatic said:
Same as all other flashing via fastboot.
The only official fastboot image for Mi A2 AO Pie available yet is v10.0.2.0 PDIMIFJ and can be found at http://en.miui.com/download-353.html or https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849.. Here in forum you can find hand-made variants of images for 10.0.3.0-10.0.7.0, but all these contain same image of splash partition as in official ROM (if any).
.TGZ and .TAR archives can be unpacked by 7z and many other programs.
Inside archive is directory called smth like "jasmine_global_images_V10.0.2.0.PDIMIFJ_9.0" containing the ready ROM image for fastboot flash.
Inside this directory there are several batch files, containing the same line for flashing splash partition:
Code:
fastboot flash splash %~dp0images\splash.img
Note that "splash.img" is foind in " \Images" subdirectory.
Click to expand...
Click to collapse
thanks for you information. my device is locked. when i try to peform fastboot devices , it shows me a error saying application was unable to start correctly.
1. Search for guides how to install ADB drivers and use fastboot, and study these
2. Search here for guides how to unlock bootloader and critical of Mi A2
Nobody will move your fingers except you.
Aerobatic said:
1. Search for guides how to install ADB drivers and use fastboot, and study these
2. Search here for guides how to unlock bootloader and critical of Mi A2
Nobody will move your fingers except you.
Click to expand...
Click to collapse
thanks for your information.
My devices is locked(bootloader). and fastboot isn't showing up. now tell me how do i flash spalsh file?
1. Is phone working and the only problem is black screen in fastboot mode?
If phone is bricked, just bring it to service or somebody who knows what to do.
Following is what you could have already found in guides I was suggesting to find and study
2. Prepare everything for unlocking in phone:
2.1. Get "developer rights"
2.2 Allow "USB debugging" and "OEM unlocking" in developer options
3. Have you get acquainted with ADB drivers installation and ADB commands and fastboot commands?
Can you see result of "adb devices -l" command in CMD shell when phone is attached to USB-2.0 port with MTP file transfer enabled?
If no, just bring it to service or somebody who knows what to do.
4. Can you see result of "fastboot devices -l" command in CMD shell when phone is attached to USB-2.0 port in what is supposed to be bootloader mode with black screen?
If no, just bring it to service or somebody who knows what to do.
5.. If yes, and device ID is the same as in result of "adb devices -l" command
6. Unlock bootloader and critical (see guides here in Mi A2 threads), it takes 2 commands and 2 reboots
7. Reflash splash.img as stated above in my 1st message
Nobody here can repair your phone, - only you or service. So I won't write more here.
Aerobatic said:
1. Is phone working and the only problem is black screen in fastboot mode?
If phone is bricked, just bring it to service or somebody who knows what to do.
.
Click to expand...
Click to collapse
Can you help me with this? my phone is ok, when i run fastboot command it shows me "??????????? fastboot"
Restart pc or update adb and drivers.