Hi guys first and foremost, thank you for reading. I must say this is as a very informative forum with lots of good people in it. This is my first post, and i am an absolute noob so please bear with me. I am posting because i have tried my best to search for answers pertaining to my problem but to no avail, so i hope someone can really help me out here!
so i have a P1000 and bricked it before but anyway am now running
Sapir-10-20121118-nightly-p1-erezak
problem is, the baseband is unknown. which means my sim card does not work. WiFi works fine but i put in my sim card and it doesnt detect a network at all. I have also noticed that Whatsapp is not supported and with the rom, my phone gets warm at the back and power depletes rather fast.
i have doubled checked with a friend who has an unrooted P1000 with the original rom and he told me his baseband was "P1000-DXJPE"
i have gone here
http//wiki.cyanogenmod.org/wiki/Samsung_Galaxy_Tab_(GSM):_Support_Downloads
and downloaded the DXJPE modem.bin file and tried to put it in the /radio folder but nothing has changed.
So can anyone help me on this? as in, tell me, in detail how i can make my phone work properly again with data/3g/mobile. Or i will just have to use it as a Wifi tablet.
I read this in the Sapir development thread, and i quote
"Originally Posted by _Derk_
No, just the other way round.
I recommend to have the correct modem.bin (for me JPZ) stored in SD card.
So in one of the cases where you have baseband unknown like now you copy it to /radio folder, even if there is already a modem.bin (which you delete prior). Then just assign the correct authorisations (RWXRWXRWX / 777) and it should work.
Bye,
Derk"
So if this is my answer, can anyone tell me how i can go about doing this? I have no idea what it means!
Another question; is this rom power conservative? My stock GB (or is that Froyo, i cant remember) rom seems to last quite awhile as compared to the Sapir rom. Even if i don't use it, it drains power really really quick in like, a day? Is this normal?
Big drain is normal when you have bad baseband.
The thing you quote, is exactly the same as your own method.
The difference is Derk suggest jpz modem.
So download jpz modem and unzip and place it in /radio
For permission, use root explorer or ES file explorer.
Click long on the file and access its properties, and tick all.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Big drain is normal when you have bad baseband.
The thing you quote, is exactly the same as your own method.
The difference is Derk suggest jpz modem.
So download jpz modem and unzip and place it in /radio
For permission, use root explorer or ES file explorer.
Click long on the file and access its properties, and tick all.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hi Priyana thanks for the quick response i have already gotten the JPZ modem.bin and put it in /radio. I am actually using Solid Explorer instead of ES Explorer. Root Explorer does not work for some reason. I have also changed the permissions in properties as to what Dirk has mentioned,
RWXRWXRWX / 777
sadly, nothing has changed. What do u suggest i do next?
There was a build in the past that put it in /system/vendor/
Try that?
Sent from my GT-I9300 using xda app-developers app
priyana said:
There was a build in the past that put it in /system/vendor/
Try that?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Done that. Doesn't work
Has this got anything to do with the Owner & Group for modem.bin? Both are now set as "0:root". Both can be changed to "1000:system", "1001: radio" and "1002:bluetooth".
So by right if i go to "settings/about tablet" i should see the baseband version if everything is ok right?
Yes, should be showing under baseband. Don't know what is wrong, maybe you want to flash different nightly.
I know it is a silly question, but you did reboot, right?
Sent from my GT-I9300 using xda app-developers app
have you tried flashing JPZ modem from here ? http://forum.xda-developers.com/showthread.php?t=1069727 ?
here is the direct link for it : http://www.mediafire.com/?p312lggy0butvrw
i always flash this modem every time i changed ROM just to make sure the baseband will work correctly, and until now it's working just fine
cub3r said:
have you tried flashing JPZ modem from here ? http://forum.xda-developers.com/showthread.php?t=1069727 ?
here is the direct link for it : http://www.mediafire.com/?p312lggy0butvrw
i always flash this modem every time i changed ROM just to make sure the baseband will work correctly, and until now it's working just fine
Click to expand...
Click to collapse
i did as u suggested. no go
priyana said:
Yes, should be showing under baseband. Don't know what is wrong, maybe you want to flash different nightly.
I know it is a silly question, but you did reboot, right?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes i did reboot. I am actually trying to follow your guide to re-stocking. Unfortunately, Odin does not recognise my P1000 in download mode.
This is quite the disaster isn't it? I am ****ed aren't i. :crying:
Noob suggestion,
Wipe everything, factory reset, partition cache, dalvik cache, battery stat. Fix permission.
And reflash the ROM again, after that, reflash the gapps, and reflash the modem. Maybe it'll work.
Sent from my GT-P1000 using XDA Premium HD app
Flashing modem is really totally unnecessary and leading to confusion if people grab the wrong flash able format.
In stock ROM when we have bml partition, the only way to change modem is via Odin or cwm.
In mtd based ROM, they sit right there in /radio/modem.bin
Odin cant detect the tab is indeed quite weird, but could be driver issue.
For now, try flash cm10 instead?
Sent from my GT-P1000 using xda app-developers app
cub3r said:
have you tried flashing JPZ modem from here ? http://forum.xda-developers.com/showthread.php?t=1069727 ?
here is the direct link for it : http://www.mediafire.com/?p312lggy0butvrw
i always flash this modem every time i changed ROM just to make sure the baseband will work correctly, and until now it's working just fine
Click to expand...
Click to collapse
priyana said:
Flashing modem is really totally unnecessary and leading to confusion if people grab the wrong flash able format.
In stock ROM when we have bml partition, the only way to change modem is via Odin or cwm.
In mtd based ROM, they sit right there in /radio/modem.bin
Odin cant detect the tab is indeed quite weird, but could be driver issue.
For now, try flash cm10 instead?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i just did. same thing. No baseband. what could i have done before to possibly let this happen? perhaps when i rooted it?
No, what you rooted as long been overwritten when you flash the rom using cwm.
I suspect you just need a different ROM.
Try aokp jb instead
Sent from my GT-P1000 using xda app-developers app
priyana said:
No, what you rooted as long been overwritten when you flash the rom using cwm.
I suspect you just need a different ROM.
Try aokp jb instead
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
On AHKP now. Baseband is MIA. Why am i not suprised....
priyana said:
No, what you rooted as long been overwritten when you flash the rom using cwm.
I suspect you just need a different ROM.
Try aokp jb instead
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hey yo know what, i used your restock guide. now my phone works ok. I managed to get Odin to recognize my phone... i went to Safe mode with networking, installed the drivers that came with the GB Safe package. Rebooted to normal and opened Odin... voila! I couldn't be happier :laugh:
thanks very much Priyana! much appreciated!
Bruise Wayn said:
Hey yo know what, i used your restock guide. now my phone works ok. I managed to get Odin to recognize my phone... i went to Safe mode with networking, installed the drivers that came with the GB Safe package. Rebooted to normal and opened Odin... voila! I couldn't be happier :laugh:
thanks very much Priyana! much appreciated!
Click to expand...
Click to collapse
could you please give more details how to solve the unknown base and?
I have the problem, before miui 4.0.4 works, after Sapir 4.1.2 the 3g is lost,
Thanks,
Obviously he restock.
You need to check if you have IMEI as 004xxxxxxx (bad IMEI) or the normal 35xxxxxxx.
if bad imei, it is corrupted efs
And in sapir thread we talked about it, use search.
Sent from my GT-P1000 using xda app-developers app
solved by flashing modem.bin with odin
priyana said:
Obviously he restock.
Click to expand...
Click to collapse
Thank you for the answer, I have solved by flashing modem.bin with odin.exe
BR,
T
tucahara said:
Thank you for the answer, I have solved by flashing modem.bin with odin.exe
BR,
T
Click to expand...
Click to collapse
You sure? On Sapir?
It is an MTD rom, odin flashing modem is never heard of!
But then again, it works....
Related
Hey Guys,
I hope this is not a complete repost
I have a samsung Galaxy s i9000 and i installed a custom gingerbread 2.3.4 ROM yesterday, all worked fine, but was unable to receive phone calls so i tried reflashing my phone to see maybe it was installed incorrectly.
Im not able to get into recovery mode but i am able to get into download mode.
So i installed Odin, and a .pit file that someone recommended. earlier i downloaded a .tar file that was compatible with my phone.
Everything went fine and it said it was successful, but im now stuck on a black screen with nothing but download mode.
My question to you is:
What files do i need to download inorder to get it to boot, and then allow me to flash to a gingerbread version on android.
I have a 512.pit file, i just need all the other odds and ends like a PDA, phone, CSC files.
Please please help me.
Thanks you for your time.
The same thing happened to me I just flashed a stock rom using odin and haven't tried flashing anything else yet
Sent from my SGH-T959V using XDA App
falcons2 said:
The same thing happened to me I just flashed a stock rom using odin and haven't tried flashing anything else yet
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
hi,
The question is, where did you get your stock ROM from, what files did you use? cause I have no clue what files to use just to get the phone going again.
Thanks thou
I just went to the xda website and found the stock rom forum and then I just picked one and flashed it with odin
Sent from my SGH-T959V using XDA App
try to reflash back with another rom and with .pit dont forget to REPARTITION CHECKED
Sent from my GT-I9000 using XDA App
http://forum.xda-developers.com/showthread.php?t=846913
[REF] Stock Firmwares for Samsung Galaxy S I9000 series - Download Only
Sent from my GT-I9000 using Tapatalk
Thanks guys for all your comments, i have successfully flashed and got everything working, yes there is a BUT!!!!
its in a different language, its still in the setup mode, i dont want to do anything unless i know that i can change it.
anyone got a screeny for me of where and what icon to press to select English as my primary language.
Thanks
ok i found the problem, i downloaded a arabic/african version of the stock firmware, i wanted to ask, could i install a american or europe version?
or will my network not work.
Thanks
SLYLUX said:
ok i found the problem, i downloaded a arabic/african version of the stock firmware, i wanted to ask, could i install a american or europe version?
or will my network not work.
Thanks
Click to expand...
Click to collapse
im on indonesia (asia) use europa rom
Sent from my GT-I9000 using XDA App
Zup,
I rooted a while ago, and since i'm running Ubuntu i haven't managed to get CWM yet, so i noticed that i can use Odin Mobile Pro to do it so i installed it and downloaded the correct kernel. I opened OMP and browsed to find the kernel on the internal memory but i can't choose it (it's a .RAR-file), so i extract it to see what's hidden inside. According to Odin i can flash "zImage" so i do it. Big big mistake.
The phone won't boot now, and the only thing i get is the "Samsung Galaxy Note GT-N7000.
What to do?
Thanks in advance
I can enter Download mode, and that's it. Some help here please?
Use pc odin and flash a stock rom. You must be in download mode
Sent from my GT-N7000 using xda premium
Thanks.
Where can i find a stock ROM? And do i need ADB installed or is it OK with the drivers from Kies? I'm asking since i'm using Ubuntu so i'll have to use my brothers PC, so i can't install a freaking SDK.
Got a stock ROM now, downloaded the ADB files and Odin, so i'll see if that works..
You should just try to read a little more
Kies drivers should be fine. Go to the development forum and you will find stock roms thread.
Sent from my GT-N7000 using xda premium
LordManhattan said:
Got a stock ROM now, downloaded the ADB files and Odin, so i'll see if that works..
Click to expand...
Click to collapse
Good luck!
Sent from my GT-N7000 using xda premium
Also make sure you read where the file goes and what to tick. Dr Ketans guide helped me
Sent from my GT-N7000 using xda premium
Awesome. Downloading XXLA4 now, but it takes forever... 100KB/sek.. Horrible servers.. FML
Still downloading the ROM.. WHY in the sweet hell haven't anybody made a torrent or uploaded it to another place? 2 hours to download 550MB on a 20 Mbps connection is tragic..
Update: OK, i'm up and running again! Odin worked like a dream without any problems Thank you so much Indie!
(I don't have any "Thanks" left today, so i can't thank you again)
LordManhattan said:
Awesome. Downloading XXLA4 now, but it takes forever... 100KB/sek.. Horrible servers.. FML
Click to expand...
Click to collapse
you said downloading LA4.
Just make clear, LA4 wont Root directly, n looking to sequence, you are going to flash it with PC Odin. If i m correct
Just Downgrade to old version, get it Rooted, then update to LA4
LordManhattan said:
Update: OK, i'm up and running again! Odin worked like a dream without any problems Thank you so much Indie!
(I don't have any "Thanks" left today, so i can't thank you again)
Click to expand...
Click to collapse
No probs man. Just glad you got it working again
Sent from my GT-N7000 using xda premium
i had the exact same thing after flashing LA4 and had to use odin to flash an older rom to get it booting to then get root access and restore a backup
dr.ketan said:
you said downloading LA4.
Just make clear, LA4 wont Root directly, n looking to sequence, you are going to flash it with PC Odin. If i m correct
Just Downgrade to old version, get it Rooted, then update to LA4
Click to expand...
Click to collapse
Yeah, i noticed this when i had downloaded 300MB of LA4, so i didn't bother to stop it and select a rootable ROM I just wanted to get my Note working again. But i'm already missing root like crazy, so i think i'm gonna downgrade and root it again very soon.
Edit: Wait a minute.. I was rooted, i messed the phone up, flashed LA4, booted up the phone, nothing got wiped but i lost root.
ya it is nonwipe version so even with PC Odin, you won't lose anything BUT just ROOT
Aha!
But if i choose to flash another ROM with PC Odin, will i get the triangle at boot? Do i only get the triangle when i flash unofficial ROMs like CM9?
I'm a little unclear on these parts.
Sent from my iPad GT-N7000 using xda premium
No it won't give you triangle if you flash any stock ROM. It gives only when you flash custom(yes like rocket/CM9)
Sent from my GT-N7000 using xda premium
Awesome. Thanks!
Sent from my iPad GT-N7000 using xda premium
LordManhattan said:
The phone won't boot now, and the only thing i get is the "Samsung Galaxy Note GT-N7000.
Thanks in advance
Click to expand...
Click to collapse
I have the same problem right now. I'm trying to recover this problem
I used Odin to download, but now the Tab is stuck as it just keeps saying loading...
I tried disconnecting the battery, but that didn't work.
Any ideas?
Thanks!
Golf Educator said:
I used Odin to download, but now the Tab is stuck as it just keeps saying loading...
I tried disconnecting the battery, but that didn't work.
Any ideas?
Thanks!
Click to expand...
Click to collapse
What did you try to download and do you have a custom recovery installed, twrp or cwm? With whatever recovery you have try doing a factory reset and wipes.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
What did you try to download and do you have a custom recovery installed, twrp or cwm? With whatever recovery you have try doing a factory reset and wipes.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Thanks for answering...
I believe I was trying to download a new CWM with odin. I'm not sure how to use a factory reset and wipes as I can't use anything on the GT, as it is stuck. As this point I am hoping that the new IC firmware will be available through Kies.
I can still use Odin from the PC through Kies, though.
Thanks again!
Regards,
Golf Educator: confused:
Does Odin recognize your device? If so you can flash the stock rom from sammobile.com. You need to extract the .tar.md5 file from the zip. Use 7-zip to do that
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Does Odin recognize your device? If so you can flash the stock rom from sammobile.com. You need to extract the .tar.md5 file from the zip. Use 7-zip to do that
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Again, thanks for responding...
At this point I'm afraid of "Bricking it" before I can have a chance to update the firmware to IC. Hopefully that will be soon.
I really don't know what I am doing, and I have already screwed it up. The GT Honey Comb is working fine, but I can't do anything to upgrade it, internally, as everything is stuck within the GT!
At one point I was trying to upgrade to Jelly Bean, but now I'm just hoping to just get IC. If I can get the IC downloaded through Kies, I'm thinking that the new firmware upgrade using Kies will take care of things. What do you think?
I guess I can live without Jelly Bean.
But I'm willing to give something else a try, however, I would need detailed, step-by-step "For Dummies" directions on what I should do; and as kind as you are, I wouldn't want to ask you to do that?
Kind regards,
Golf Educator
Hi. Don't be scared of losing your device. Will try to walked you thru the process.. just to be more clearer. Can you write down all your device info such as current firmware that u r using? And also do tell us the region ( im XME -Malaysia) because sometimes not all the stock rom can be use to upgrade..
You may need :-
1- kies(for drivers)
2- cables
3- charge your tab to 80%
4- windows/os of ur pc or Mac
After you post all of the info. I or we will try our best to walk you thru the process
Sent from my GT-I9000 using xda app-developers app
BlackCl0udMY said:
Hi. Don't be scared of losing your device. Will try to walked you thru the process.. just to be more clearer. Can you write down all your device info such as current firmware that u r using? And also do tell us the region ( im XME -Malaysia) because sometimes not all the stock rom can be use to upgrade..
You may need :-
1- kies(for drivers)
2- cables
3- charge your tab to 80%
4- windows/os of ur pc or Mac
After you post all of the info. I or we will try our best to walk you thru the process
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Okay, here we go... let's shoot for Jelly Bean!
Model number: GT-p7300, that has wifi with G3, European Version, as I work with the US military at RAF Lakenheath, England, and bought it locally. I am in the London world-time zone. Five hours earlier than EST.
Android version: 3.2
Baseband version: P7300xxkj6
Kernel version: 2.6.36.3 (Original when I bought it, however i did root it) [email protected] #1 SMP PREEMPT Fri Dec 23 13:54:01 KST 2011
Build number: HTJ85B P7300XWKL4
I'm using a PC HP Pavilion with Windows 7 with Odin 3v1.85 that does turn yellow when used.
The Kies on my GT works, but the Kies on my PC for some reason doesn't recognize the GT. I believe the Kies drivers are loaded, ok.
I am using the original Samsonite Cable.
Now you know more about me than my wife does...
Thanks,
Golf Educator :fingers-crossed:
Sorry for all the questions, but it's hard to diagnose all the problems from a distance. It sounds like when you tried to flash cwm something messed up the tab. But if it still turns on you can probably get it to work again. Kies is a crapy program so I always use Odin. When you plug the tab into Odin does the com in Odin turn yellow and show the port?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Sorry for all the questions, but it's hard to diagnose all the problems from a distance. It sounds like when you tried to flash cwm something messed up the tab. But if it still turns on you can probably get it to work again. Kies is a crapy program so I always use Odin. When you plug the tab into Odin does the com in Odin turn yellow and show the port?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
No problem with the questions... appreciate you taking time to help!
I use Odin 3v1.85 with the correct Samsonite cable. It does turn yellow. I don't know if it shows the port. I haven't toyed with it again as I didn't want to lose the use of the GT to be able to update the new IC firmware that is on the way for this GT-P7300 with wifi and G3, European model.
Regards,
Golf Educator
Ok, that's good, Odin is working and now we can get you up and running. Let's try on thing first, can you to recovery mode? Hold the power button and volume up button down, when the tab responds let go of the power button but still.Hold the volume up, then a second later let go of the volume. This should bring you to a menu where you can do some wipes and a factory reset. (I don't remember exactly what's there) IF you can d o wipes try that first. If that doesn't work then try the factory reset (do you have any data and pictures,etc you wantbacked up?)
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
---------- Post added at 06:56 AM ---------- Previous post was at 06:50 AM ----------
One more question, what country are you in?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Ok, that's good, Odin is working and now we can get you up and running. Let's try on thing first, can you to recovery mode? Hold the power button and volume up button down, when the tab responds let go of the power button but still.Hold the volume up, then a second later let go of the volume. This should bring you to a menu where you can do some wipes and a factory reset. (I don't remember exactly what's there) IF you can d o wipes try that first. If that doesn't work then try the factory reset (do you have any data and pictures,etc you wantbacked up?)
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
---------- Post added at 06:56 AM ---------- Previous post was at 06:50 AM ----------
One more question, what country are you in?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I'm in the United Kingdom and bought the GT in England... It is the GT-P7300 with wifi and 3G. The IC hasn't been released for the United Kingdom, yet, but it should be out in a few days.
I also think that my Odin is working... but the Recovery Mode is the internal problem that I mentioned with the GT. That is where it is stuck saying that it is loading (but it is not loading). At this point my problem is because of that I can't get to anything and can't do anything in the Recovery Mode with it stuck in that frozen loading effort... including wipes, factory resets, etc., it just keeps on saying that it is loading!
Thanks, again, I appreciate your interest and effort!
Are you trying to use cwm 5.5.0.4 that's in the 8.9 development forum stickies? I would 're-download the .tar version again and try to reflash it with odin. You'll load it in the PDA section and only have the auto-reboot and f.reset checked. Don't have anything else checked. Your first attempt could have been a bad download of cmw.
If you're currently rooted then will have to do something different in order to get the OTA ics when it comes out. I just got it for my tab a few days ago. You'll like it much better than hc.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Are you trying to use cwm 5.5.0.4 that's in the 8.9 development forum stickies? I would 're-download the .tar version again and try to reflash it with odin. You'll load it in the PDA section and only have the auto-reboot and f.reset checked. Don't have anything else checked. Your first attempt could have been a bad download of cmw.
If you're currently rooted then will have to do something different in order to get the OTA ics when it comes out. I just got it for my tab a few days ago. You'll like it much better than hc.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
OK! I think I've made some progress...
I was able to get clockworkMod_Recovery_v5.5.0.4.tar from androidjinn.com. I was also able to get a connection from Odin as it turned yellow. I loaded the PDA with the .tar as you suggested, and started it. It passed! Now I have a CWM that works. Afterwards, using it I did a Factory Reset.
Now, I have a newly installed hc and a working CWM. But, would you believe that the Downloading Mode is still stuck on loading. Do you think when we flash a new ROM that it will reset the reloading correctly?
I feel pretty proud of myself! I think I am ready for Jelly Bean...
How do I do that?
Sounds great. I've been running jb for quite a while, but frankly I'd wait for the ics. Runs just as good and it's stock. Never thought I'd say that until I tried it.
Sent from my SGH-I727 using xda app-developers app
jd1639 said:
Sounds great. I've been running jb for quite a while, but frankly I'd wait for the ics. Runs just as good and it's stock. Never thought I'd say that until I tried it.
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Two questions:
Which system will enable the GT to be used as a phone?
How do I root my newly factory reset hc so my aps work?
Thanks
I have an i957 tab which is different than yours so I don't have an answer to your second question. To root your device see the stickies in the tab 8.9 development section it should be as easy as flashing a zip file thru your recovery. Make sure you get the right zip for your specific device though. Otherwise you can brick it. The biggest mistake people make its using a file for a similar device rather than one for their specific device.
Sent from my SGH-I727 using xda app-developers app
Nice
Golf Educator said:
OK! I think I've made some progress...
I feel pretty proud of myself! I think I am ready for Jelly Bean...
How do I do that?
Click to expand...
Click to collapse
Good work so far! Now you just need to download the rom (.zip file) and gapps (also a .zip) for the rom you want to use. Put those on the sd card of your tablet. To do this you may have to "mount external storage" in the cwm menus. Once you get those on there, do a full wipe, and then install the rom and gapps. That should do it for you.
To be honest, p7300 can only make calls via root and using cm9 custom rom. Will try to help you mate!! Sorry for late reply..
But just to make it easier, the 1st step is to use stock 2.3.6 that can be installed CWM 5, after getting that. You must download the custom cm9 rom and install into your internal memory(as i can recall all cm based rom will update your cwm 5 to 6 in the process). Will give you the link and try to resolve your probs!!
This is what you will need :-
Download Gt p7300 XEU stock 2.3.x ROM(search via filecorp)
Odin
Pits file
(all this is just in case that you need to flash it back to stock)
Will update my post in a short period of time!
Regard
BlackCl0udMY
Malaysia
Note to gulf educator: if your going to install a custom Rom, cm9 etc., you don't need to root first.
Sent from my SGH-I727 using xda app-developers app
upconvert said:
Good work so far! Now you just need to download the rom (.zip file) and gapps (also a .zip) for the rom you want to use. Put those on the sd card of your tablet. To do this you may have to "mount external storage" in the cwm menus. Once you get those on there, do a full wipe, and then install the rom and gapps. That should do it for you.
Click to expand...
Click to collapse
How do you mount external storage?
Thanks
Hello,
I have gotten the stock ICS rom from samfirmware.com, Installed using ODIN and it all went green.
However, after restart the touch screen is not working !
I have tried the following:
1. First the Default (XXX) ICS rom
2. Second, the Actual ATT ICS rom
3. Flashed CWM and it is working
4. Then tried AOKP unofficial rom, not starting
No luck so far, any help is much appreciated please.
The touch screen was working after step 3?
Sent from my SAMSUNG-SGH-I727 using xda premium
wamaOnline said:
Hello,
I have gotten the stock ICS rom from samfirmware.com, Installed using ODIN and it all went green.
However, after restart the touch screen is not working !
I have tried the following:
1. First the Default (XXX) ICS rom
2. Second, the Actual ATT ICS rom
3. Flashed CWM and it is working
4. Then tried AOKP unofficial rom, not starting
No luck so far, any help is much appreciated please.
Click to expand...
Click to collapse
Do you know what rom you flashed from Sam mobile?
Sent from my SAMSUNG-SGH-I957
jd1639 said:
Do you know what rom you flashed from Sam mobile?
Sent from my SAMSUNG-SGH-I957
Click to expand...
Click to collapse
First was this one sammobile (dot) com /firmware/?page=3&model=SGH-I957&pcode=XXX&os=1&type=3#firmware[/url]
Then when it didn't work, tried this one
sammobile (dot) com /firmware/?page=3&model=SGH-I957&pcode=ATT&os=1&type=3#firmware
Sorry for the strange URL format, but seems as anew member I don't get to add URLs yet
orlandoxpolice said:
The touch screen was working after step 3?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Sorry, I meant the cwm recovery was flashed correctly and functioning
Btwi tried the fix permissions suggestion from the similar thread but no luck
What version of odin did you use? The roms look ok. If you didn't use ver 1.85 download that and re flash the Rom.
Sent from my SAMSUNG-SGH-I957
jd1639 said:
What version of odin did you use? The roms look ok. If you didn't use ver 1.85 download that and re flash the Rom.
Sent from my SAMSUNG-SGH-I957
Click to expand...
Click to collapse
It is the Odin version I have used,
One more note now, am not sure if that is normal if not.but after the latest flash ( preceded by a data wipe and format ) I can now see zip file I have placed on sdcard but can't access them for flashing and/or ad new zip files from pc
In cwm do a factory reset, wipe and format system and data and then boot. I'm hoping that will solve the problem.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
In cwm do a factory reset, wipe and format system and data and then boot. I'm hoping that will solve the problem.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Tried,booted, "SAMASUNG"screen only ( as expected sicne i formatted the system ), then re-flushed the ATT ICS and same output
Am trying to get a new ROM flashed, but when the device powers up [ without me going through the wizard ], i can't write anything to SD from my PC.
Any info around here about flashing CM or AOKP using ODIN for this I957 ?
Not with Odin that I'm aware of. All are zip files and would go thru cwm. If you get only to the Samsung logo, my experience has been a factory reset usually gets you past that and if that doesn't work flashing the stock rom with Odin does. And I'd flash the honeycomb rom and bring it back to they way I bought it, then upgrade to ics
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Not with Odin that I'm aware of. All are zip files and would go thru cwm. If you get only to the Samsung logo, my experience has been a factory reset usually gets you past that and if that doesn't work flashing the stock rom with Odin does. And I'd flash the honeycomb rom and bring it back to they way I bought it, then upgrade to ics
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Tried the honeycomb step, still same problem
As for Booting to samsung screen .. i did format /system as suggested, so there will be no system to boot to i think
I'm at a loss, you've tried everything that has gotten me beyond the boot screen.
Anyone else have any ideas?
Sent from my SGH-I727
wamaOnline said:
Tried the honeycomb step, still same problem
As for Booting to samsung screen .. i did format /system as suggested, so there will be no system to boot to i think
Click to expand...
Click to collapse
I should mention something that has gotten me worried, i flashed a TWRP recovery to check if the touch would work there, but it didn't.
Not sure if i should be worried about HW now, or try another TWRP for instance? Or perhaps TWRP shares another flawed tab wide configuration with the Android image ?
It's not twrp, I use it on my tab and it Works fine. If you were the only one who has this problem I'd say hardware for sure. But at least one other person has the same problem after updating to ics. It seems like there something with the firmware interfacing with the touch screen.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
It's not twrp, I use it on my tab and it Works fine. If you were the only one who has this problem I'd say hardware for sure. But at least one other person has the same problem after updating to ics. It seems like there something with the firmware interfacing with the touch screen.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Then why is it still borked when reverting to hc?
Sent from my SAMSUNG-SGH-I727 using xda premium
Good question. One of the guys couldn't get the touch screen to work in twrp either. It sounds like a hardware issue but to have a few guys have the same problem after installing ics? I don't know? Something's doing it which I can't figure out
jd1639 said:
Good question. One of the guys couldn't get the touch screen to work in twrp either. It sounds like a hardware issue but to have a few guys have the same problem after installing ics? I don't know? Something's doing it which I can't figure out
Click to expand...
Click to collapse
yea i dont get how a rom flash could cause a hardware issue
orlandoxpolice said:
yea i dont get how a rom flash could cause a hardware issue
Click to expand...
Click to collapse
Think the other colleague did say he found someone elsewhere who resolved the problem by reverting to an older backup he had, which gives me hope that this is no hw issue
And this was my first time to flash any ROM without a backup first, thought a stock update would be fine !!
Can I use adb for instance to verify if it was a hardware issue,if so then any help is appreciated
wamaOnline said:
Think the other colleague did say he found someone elsewhere who resolved the problem by reverting to an older backup he had, which gives me hope that this is no hw issue
And this was my first time to flash any ROM without a backup first, thought a stock update would be fine !!
Can I use adb for instance to verify if it was a hardware issue,if so then any help is appreciated
Click to expand...
Click to collapse
Got it Reassembled and cleaned it and it worked
same prob, touchscreen not responding
wamaOnline said:
Got it Reassembled and cleaned it and it worked
Click to expand...
Click to collapse
I'm having this issue of the touchscreen not responding on my s2 now
You say you got it reassembled? What did you have to do to repair it
any help greatly appreciated
I have JB 4.1.2 and cwm 9.1 flashed
after reboot screen comes on but won't respond to touch, I can only access download and recobvery screens
I also have the phone not showing on computer when usb attached but am loading rom etc to ext sd card first and installing them from cwm
Got the maintenance center to disassemble it, clean the pins and reconnect the screen and then it worked
Sent from my LT26ii using xda app-developers app
Hi Experts,
My device is GT-P1000. I was able to flash the nightly built from cyanogenmod site. I flashed cm-10.1-20130609-NIGHTLY-p1.zip. By the way, I came from AOKP ICS rom.
All is working well for me for the basic tasks that I've tested except that it can't detect our mobile networks here in Singapore which is pretty much a deal breaker. Wifi, bluetooth, etc. are okay. You can see in my attachment that it can't find any GSM network even if I search manually. Is this rom not compatible to Singapore local telcos? Did I miss anything? May be you experts got some ideas.
I have searched the android development forum for CM10.1 Nightly but can't find any relevant solution. Hence, I try my luck here if any of you guys experienced the same issue and was able to solve it.
Thanks in advance.
/f
What is your IMEI showing? If not 35xxxxx, say unknown, or 0049xxx then it won't work. Unknown is due to broken modem.bin. Wrong IMEI is due to corrupted EFS. Either restore from backup found in your sdcard or restock then reflash.
Sent from my GT-N7100 using xda app-developers app
unknown IMEI
priyana said:
What is your IMEI showing? If not 35xxxxx, say unknown, or 0049xxx then it won't work. Unknown is due to broken modem.bin. Wrong IMEI is due to corrupted EFS. Either restore from backup found in your sdcard or restock then reflash.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Hi Priyana,
Thanks for your reply. You're correct. I checked the IMEI and it's unknown(shown in attached image).
Correct me if I'm wrong, I need to restore to my backup AOKP ICS rom and then flash this CM10.1 rom again?
Or I need to flash a stock Gingerbread rom then flash CM10.1 rom again?
Thanks in advance,
/f
hi
the best way
flash cm9.1 befor flash cm10.1
work gsm
Unknown is due to broken modem. Just to to development subforum, there is a sticky thread for modem.
Get the JPZ modem, but don't flash it.
Unzip it, just copy the modem.bin to replace the one in /radio/ of your device.
Use root explorer or similar. Reboot and check baseband again. If IMEI still unknown, better restock.
Sent from my GT-N7100 using xda app-developers app
jalil123 said:
hi
the best way
flash cm9.1 befor flash cm10.1
work gsm
Click to expand...
Click to collapse
Hi Jalil,
I tried what you advised but still no luck. The IMEI is still unknown. I even restore my AOKP rom but still the same issue is happening. Thanks though.
I downloaded a stock firmware (gingerbread) and planning to flash it if priyana's advice doesn't work.
I will try priyana's suggestion first before I flash a stock firmware.
Hi Priyana,
I saw the thread that you replied in back in 2012 Oct. Will try your advice. Thanks.
/f
have you also check if you have a backup folder in your sdcard or external sdcard
that has efs folder in it.
Pick the oldest one which is more likely to be the good copy.
Copy the content to replace the one in /efs
Also make sure that you show hidden files in the file explorer, or you will miss important files from that efs back up folder.
Verstuurd van mijn GT-P1000 met Tapatalk
Fixed. Million THANKS guys!
Hi Priyana, KasSGT and Jalil,
I was able to fix my device. I did flash a stock rom, root it, and then flash the CM10.1 rom. I now backed up the /radio directory just to be sure.
Thanks for all your advice.
/f