Related
Hey Guys. I have a rooted Nexus One running CyanogenMod 7.2.0-RC0-N1-KANG. Sometime back I had my SD card connected to my PC via a memory card reader. I was deleting a video file but while the file was being deleted, my SD card got unmounted. I have no idea as to what happened but now it looks like I have considerable part of that space lost.
I did scan my SD card using Windows disk check but it found no errors. Now I am thinking of formatting my SD card. I have a 1 GB EXT3 partitioned 16 GB Sandisk SD card. Most of my apps are installed on the SD card. Which is the best way to format my SD card? Also I do have Rom Manager & Titanium Backup installed. How can I ensure that I back up all my data and do an easy restore? Alternately is there any way I can recover the lost space without formatting?
Any help will be greatly appreciated
there are some programs out there to retrieve lost disk data--i have not used any but a search may help
i bu all sdcard to pc then reformat with sdformatter with full erase and size adj ON, then repartition inside phone--0 swap
nandroid first
Thanks for replying rugmankc. Do you have a direct link to sdformatter? Also do you use rom manager for the partitioning? In case if I do backup my entire rom and then format my sd card, can I simply restore everything by loading up the backup? Can you give me some simple step by step procedure of backup & format? Thanks again for your help.
Sd formatter: https://www.sdcard.org/downloads/formatter_3/eula_windows
Nandroid backup
Backup to pc
Format sd card
Create partition (either wid pc or in recovery)
Copyback to sd card
PS: hv read ppl complaining abt rom manager aka cwm creating bad partitions.
Sent from my Nexus One using Tapatalk
Hey n1newbie. Thanks a lot for your reply. Sorry for being noobish but which is the best way to make a Nandroid backup and how can I partition with PC and recovery? Also once I copy back the backup on to my sd card, how do I restore the backup?
sorry for my late reply--nite here
i use this one--but shouldn't matter--just make sure you use full erase on and size adj on--you want complete format, not partial as phone does
http://dl.dropbox.com/u/28338566/SDFormatter 2.0.mht
the steps n1newbie gave you are good ones
i use amonra so don't know cwr steps
the partition steps are done inside phone for me, as i mentioned, thru recovery and should be straight forward, including steps to bu and restore
there is no best way to nandroid an that term/folder won't be seen in cwr, just cw backups. the options should all be there in cw or rom mgr, including restore
i bu sdcard regularly and titanium too
Hi y2jamit, its a pleasure to help u
Choosing recovery is ur preference (clockworkmod,amonra,4ext)
As rugmankc said, Making a nandroid backup and restoring is done via recovery mode and is jus straight forward. Remember to use the same recovery for safer side
To format in PC try any partition tools (mini tool parition wizard )
Sent from my Nexus One using Tapatalk
rugmankc & n1newbie, I really appreciate your help guys. Thank for making this so much more easier. I guess I now have the confidence to take the plunge
good luck
just read a lot on whatever you do so you have a good idea on it and then you can ask specific questions on the process--
ICS is still alpha so fairly unstable for a lot
peple, i can't believe is so hard to find information about this big problem.
HOW CAN I MOVE INSTALLED APPS TO MY EXTERNAL SD??
I tried all "App2SD" in google play, but looks like Optimus 2x mount its SD in a different way, so what these apps does is move apps to/from internal memory (it is not the same as internal sd??? why 2?) and internal sd.
So i boght a 32GB sd for just videos and mp3???
I googled and found a link talking about "Mod Install Location".
Well, this "Mod Install" doesn't work too. I can't install news apps in external sd nor can i move installed apps.
No one bottered with this situation too???? Is impossible to move installed files in Optimus 2x do the external SD?
install CM7 Custom ROM
siibel said:
install CM7 Custom ROM
Click to expand...
Click to collapse
What exactly that does?
But i want to try another ROMs. There is not another way?
Another question about this SD problem: looks like that after flash roms and firwares the internal sd will be totally wiped. Well, so Titanium Backup is useless for Optimus 2x, as it doens't let choose directory for backups. Solution?
presuntinho said:
What exactly that does?
But i want to try another ROMs. There is not another way?
Another question about this SD problem: looks like that after flash roms and firwares the internal sd will be totally wiped. Well, so Titanium Backup is useless for Optimus 2x, as it doens't let choose directory for backups. Solution?
Click to expand...
Click to collapse
+1 on CM7. That ROM will render your internal SD useless as EVERYTHING can be thrown to the external SD.
I have Titanium Backup Pro and there's an option to choose the backup location in preferences. I'm pretty sure it's also present in the free version.
(TB is very useful for me. Enough for me to purchase it.)
If you are using app2sd from market to move your application to sdcard, meaning you can do it manually from your application manager, each and every app you click will have a button to move to sd. App2sd market app just simplifies this process. Please note that this method only moves some app files to the sdcard not all of it, it will still leave app dalvik and app user data on the internal memory.
The real app2sd/app2sd+/data2sd that creates a link from your internal phone data partition and relocate your data folder to external sd are script based, and you have to make a ext3/4 partition on your external sdcard in addition to your fat32 partition. This is what you need If you want to totally move all data to external sdcard.
I have not seen ppl making tutorials using this script in o2x forum, because the 1.5gb app space is good for most people, unless if you have alot of games in your phone. For what I know the app2sd+ script is universal for all phones, you may just need to make some modifications to the script to make it work on every specific phone type/model.
About the flashing firmware wiping internal sd, I have not encountered such issue. For what reason do you flash a firmware? I havent tried flashing rom the official way since you can just use cwm to flash rom, but I flash baseband alot of times, no internal sd wipes, but it does wipe data partition.
TB doesn't let you change the backup folder like that. You have to copy the "TitaniumBackup" folder with a few backup files to where ever you want and then the app scans for folders with backups.
salisbury_steak said:
+1 on CM7. That ROM will render your internal SD useless as EVERYTHING can be thrown to the external SD.
Click to expand...
Click to collapse
But i will lost the 8 GB of this "internal SD" or i can still use it?
You have games installed in the external SD? They run as faster as in the internal?
Thanks
Chris4evernoob said:
TB doesn't let you change the backup folder like that. You have to copy the "TitaniumBackup" folder with a few backup files to where ever you want and then the app scans for folders with backups.
Click to expand...
Click to collapse
After flashing a ROM or firware i just open TB and it will recognize the old backups? I just install TB and then overwrite with the old folder?
Thanks
tablighs said:
If you are using app2sd from market to move your application to sdcard, meaning you can do it manually from your application manager, each and every app you click will have a button to move to sd. App2sd market app just simplifies this process. Please note that this method only moves some app files to the sdcard not all of it, it will still leave app dalvik and app user data on the internal memory.
The real app2sd/app2sd+/data2sd that creates a link from your internal phone data partition and relocate your data folder to external sd are script based, and you have to make a ext3/4 partition on your external sdcard in addition to your fat32 partition. This is what you need If you want to totally move all data to external sdcard.
I have not seen ppl making tutorials using this script in o2x forum, because the 1.5gb app space is good for most people, unless if you have alot of games in your phone. For what I know the app2sd+ script is universal for all phones, you may just need to make some modifications to the script to make it work on every specific phone type/model.
About the flashing firmware wiping internal sd, I have not encountered such issue. For what reason do you flash a firmware? I havent tried flashing rom the official way since you can just use cwm to flash rom, but I flash baseband alot of times, no internal sd wipes, but it does wipe data partition.
Click to expand...
Click to collapse
If i use the external sd with ext3/4 using the entire space, i will able to send file using usb, bluetooth, etc? I mean, there is any colateral?
Moving all data to MicroSD make the apps run slowly?
2 big games are enough to almost fill the entire internal memory.
tablighs said:
About the flashing firmware wiping internal sd, I have not encountered such issue. For what reason do you flash a firmware? I havent tried flashing rom the official way since you can just use cwm to flash rom, but I flash baseband alot of times, no internal sd wipes, but it does wipe data partition.
Click to expand...
Click to collapse
Well, maybe is my enlglish that is horrible, but that is what i understand reading this:
http://forum.xda-developers.com/showpost.php?p=26191714&postcount=3
"Installing this file WILL fully wipe your device, including the Internal SD. Back up!"
So:
1 Changing the ROm will wipe the internal sd?
2 Changing the firware (firmware and baseband are the same thing, correct) will?
presuntinho said:
If i use the external sd with ext3/4 using the entire space, i will able to send file using usb, bluetooth, etc? I mean, there is any colateral?
Moving all data to MicroSD make the apps run slowly?
2 big games are enough to almost fill the entire internal memory.
Click to expand...
Click to collapse
If you use app2sd+ script method, everything will function normally. A class 6 or 10 sdcard can perform as fast as your internal phone storage. You may wear your sdcard faster though since it is being regularly used and accessed.
The only problem is to fine the script itself that is specifically customised for o2x, I myself do not know how to do it, although I used it before for my HTC Desire phone, but that was long time ago and the script was integrated in custom roms since htc desire only has 150mb app space.
presuntinho said:
Well, maybe is my enlglish that is horrible, but that is what i understand reading this:
http://forum.xda-developers.com/showpost.php?p=26191714&postcount=3
"Installing this file WILL fully wipe your device, including the Internal SD. Back up!"
So:
1 Changing the ROm will wipe the internal sd?
2 Changing the firware (firmware and baseband are the same thing, correct) will?
Click to expand...
Click to collapse
Yes, all threads will say that, its just cautionary purposes. I just recently reflashed my baseband to v20c a a month ago using smartflash, it did wipe my rom data, but not my internal sd. But just incase, make a backup of everything, it doesn't hurt to do that.
tablighs said:
If you use app2sd+ script method, everything will function normally..
Click to expand...
Click to collapse
but to use apps2sd +script i need to have a partition ext3 or ext4, right? This partition in ext3 will work with usb, bluetooth, etc?
It is a good option to have the enitre microsd in ext3 instead 1 partition in ext3 and 1 in fat32?
Thanks
presuntinho said:
but to use apps2sd +script i need to have a partition ext3 or ext4, right? This partition in ext3 will work with usb, bluetooth, etc?
It is a good option to have the enitre microsd in ext3 instead 1 partition in ext3 and 1 in fat32?
Thanks
Click to expand...
Click to collapse
The ext partition will always be mounted for android system, so you cannot access via pc. You need a fat32+ext3/4 partitions combo.
First you need to know how much storage do you need for apps, please note that I think the internal 1.5gb app storage will be left unused if you decide to link your data (which will fool android system thinking it is phone memory) folder to your external sd.
We have talk too much on this topic but I myself is unsure whether you can find the script to run on o2x. Maybe its time for you to take some time on how to actually find and modify one so it works for o2x. I cannot help you on that at all. Keep us posted if you have any progress.
tablighs said:
The ext partition will always be mounted for android system, so you cannot access via pc. You need a fat32+ext3/4 partitions combo.
First you need to know how much storage do you need for apps, please note that I think the internal 1.5gb app storage will be left unused if you decide to link your data (which will fool android system thinking it is phone memory) folder to your external sd.
We have talk too much on this topic but I myself is unsure whether you can find the script to run on o2x. Maybe its time for you to take some time on how to actually find and modify one so it works for o2x. I cannot help you on that at all. Keep us posted if you have any progress.
Click to expand...
Click to collapse
But can i alternatively make a backup of big games in the sd so i don't need to download 700 MB every time i want to install it again? As already said Titanium Backup will not do that. I could cut and paste only the backup of the game i want to sd, but Titanium show the name of backups in a way wich is dificult to read among many files. Plus i am not sure TB will backup all data of the game.
Hello,
I've been patiently following this thread http://forum.xda-developers.com/showthread.php?t=1804665 for the past several months. Thanks to the selfless, hard work of Hashcode, dhacker, and also sylentprofet and jarveson (and apologies to anyone I haven't credited), the recent builds seem to have arrived at a level of functionality and stability that I'm thinking of trying to install my first custom ROM (I've already had SafeStrap 3.0.x installed for months).
My question is the following: I understand from the above thread and from Hashcode's blog that now the external SD card will be used as the default storage location. I was wondering what happens when an app is "installed to SD". From my previous experience on an original Motorola Droid, I know that "installing to SD" would move some files to a special directory on the SD card. I was wondering if this would cause collisions if the same app was installed under multiple ROM slots using SafeStrap.
Thank you for entertaining this newbie's question.
Actually the way I understand it is there is still the internal storage and external SD which are the same, but the internal storage gets partitioned separate from the rest of the storage so if you install an app to the SD card, I think it just goes in a regular folder. The system thinks the /system partition is in the regular storage for it but it actually is tricked to the internal storage.
I hope that makes sense.
MrObvious said:
... so if you install an app to the SD card, I think it just goes in a regular folder ...
Click to expand...
Click to collapse
Thank you very much for your response.
Is this regular folder on the external SD card? If so, does it mean that this regular folder will be shared by the ROMs in multiple slots if I have the same app installed under the ROM in multiple slots?
Thank you again.
alvin_a_garcia said:
Thank you very much for your response.
Is this regular folder on the external SD card? If so, does it mean that this regular folder will be shared by the ROMs in multiple slots if I have the same app installed under the ROM in multiple slots?
Thank you again.
Click to expand...
Click to collapse
If it's on the external SD then yes it is.
I had the same doubt when I recently started using ROMs on my Droid3. This thread helped me a lot.
I have lots of apps in my stock ROM that I've installed before rooting it. Do I have to install it all again on external SD? If yes, do I have to use a new flashed ROM or the stock ROM?
Thiago AmP said:
I had the same doubt when I recently started using ROMs on my Droid3. This thread helped me a lot.
I have lots of apps in my stock ROM that I've installed before rooting it. Do I have to install it all again on external SD? If yes, do I have to use a new flashed ROM or the stock ROM?
Click to expand...
Click to collapse
On minimoto I noticed it was using the exact same sd configuration as stock, perhaps because its stock based. On CM10 the external SD card is the default /sd card but you can still access the internal sd.
Regardless of how the sd card is configured you'd still have to reinstall apps when going to another ROM. I recommend using Titanium Backup then its quite simple to restore apps on another ROM. For SD data you could just manually copy and paste the folders from the internal to external SD.
spunker88 said:
On minimoto I noticed it was using the exact same sd configuration as stock, perhaps because its stock based. On CM10 the external SD card is the default /sd card but you can still access the internal sd.
Regardless of how the sd card is configured you'd still have to reinstall apps when going to another ROM. I recommend using Titanium Backup then its quite simple to restore apps on another ROM. For SD data you could just manually copy and paste the folders from the internal to external SD.
Click to expand...
Click to collapse
Thanks! So, a separate partition on SD Card would be a waste of "space", since the ROM's doesn't share acess to this partition. I've only tried with CM10, I'm going to try with MavROM and Minimoto, but i'm almost sure that I'll end backing all up with Titanium.
Thiago AmP said:
Thanks! So, a separate partition on SD Card would be a waste of "space", since the ROM's doesn't share acess to this partition. I've only tried with CM10, I'm going to try with MavROM and Minimoto, but i'm almost sure that I'll end backing all up with Titanium.
Click to expand...
Click to collapse
Sort of kind of. Basically this would be useful if you want to share apps and their settings between the custom and Stock ROMs installed on your phone [may be odd on an app by app basis depending on a few things but a good number *should* work [I dont use external SD as it eats the battery and is MUCH slower than using the /data partition so haven't tested this], so following should be close if not 100% correct
You would in stock ROM set your apps2SD app up [I DO NOT advise you to use the sdcard function found in manage apps>app area instead you should be using an app like Link2SD that actually creates a partition on your external SD and formats it to EXT3 or EXT4 [suggest using EXT4]. This way things like widgets still work whereas they don't when using the built-in android function [this happens as android uses a folder on the SDCard [which is FAT32 by default] and file permissions needed to run Widgets and some code can't be copied as needed on to a FAT32 partition so by using an app that partitions [or the recovery can do this but you would still need an app to manage which apps are in this partion] the SDCard app instead actually formats part of the card to the EXT 3 or 4 File system so it is the same as the /data partion so Android can copy EVERYTHING and nothing is affected and broken.
So you open your SDCard app manager in Stock ROM and format the External SD [THIS WILL ERASE EVERYTHING RUN APPROPRIATE BACKUPS BEFORE PARTIONING [move them to a computer and back if you dont have enough internal storage to absorb your data]]
When that completes open the app again [usually needs a restart first to mount the new partition before continuing].
Once you get that done open the Manager app and select the apps to move to this new partition.
CUSTOM ROM: Now once that is done boot in to safestrap and either setup a Custom ROM or change to it's boot slot. Next boot in to Custom ROM and install the same SD Card App Manager you used in Stock.
Next, once you open it it should say it found a partition and ask if you want to use it if it doesn't and just lists the app view the settings in the Manager app and HAVE IT SETUP AN EXISTING PARTITION. DONT PARTITION YOUR SDCard AGAIN [or all your newly moved data will bite it].
Now restart and allow it to boot back in to the Custom ROM again. Once this happens all the apps you moved to the SDCard partition should magically appear and be usable.
SO LONG AS YOUR STOCK AND CUSTOM ROMs ARE THE SAME VERSIONS DONT DO THIS IF YOU HAVE ICS ON THE SAFE SIDE AND JELLYBEAN AS A CUSTOM ROM IT WILL MOST LIKELY CAUSE ALL KINDS OF PROBLEMS
Hello,
It's my first post here.
I have a Nook HD rooted with 10.2.1. We I rooted the Nook, I made an external copy to the PC of the stock rom.
All was OK, until I tried to upgrade to cmw 11.
It gave me an Status 7 error and was imposible to upgrade.
Then I went back to the 10.2.1, but now the external SD Card is not mounted. I can't format it from the Recovery menu.
I can't read it from the Nook. I tried 3 different SD cards, but always the same.
The recovery CMW is 6.0.3.6.
When I try to format the SD card from it, it says "Error mounting /external_SD!"
When I enter the Nook in normal mode, the SD Card can not be activated. It detects the SD Card, bau can't do anything.
¿Any idea or help?
Thx!!
UPDATE: I have boot into normal mode, downloaded de Recovery CWM-5 (Recovery 6.0.4.6), and installed it from the internal memory.
After that, I succeeded on installing the CM11-M6, but still the same issue.
Can't activate/access/mount/format the SD Card, from the Android "Activate card" or from the recovery menu "Format" or "mount".
I also formatted it with SDFormatter, but nothing changes.
The SD card it's ok, as I can write/read from the PC.
I have 3 of them: Samsung, Sandisk and Trascend. None of them is recognized, and before I had no problems with them and CM 10.1
Well,
I think is finished!
I had a problem with Google apps, and installed them again, but I had at the internal memory the 4.3 GApps, and I didn't take care of the version!.
Instead of the correct GApps for the 4.4, I installed the previous one.
After installing them, I always have now "unfortunately, Android Keyboard (Aosp) Has Stopped"
So I have no keyboard!!!!
As I can't use the external SD (It doesn't work), I tried to download from the CM11 Nook the correct GApps version, but I have not keyboard to write the internet address!!! I can not indeed write the wifi password!
I have then tried to install ADB, but I can not see the Nook under "adb devices".
I'm in the point of sending the nook to the recycled bin!
Any idea of an easy solution?
Many thanks!
Dang lots of trouble. I would suggest just sticking with CM 10.2.1 for now.
Sent from my BN Nook HD using Tapatalk
Hello,
That's what I want, to go back to 10.2.1.
But the Recovery 6.0.4.6 dos not permit to install the 10.2.1, only 11.
I would like to download to the internal memory the Recovery 4 (6.0.3.6), but as I don't have keyboard (wrong GApps installed), can't write the web address. And the external SD card doesn't work too.
The only solution I see is ADB, but when I plug the Nook HD to the PC, nothing happens. There is no change in the Management console of Administration Devices....
Don't know really what to do.!
Errabundo said:
Hello,
That's what I want, to go back to 10.2.1.
But the Recovery 6.0.4.6 dos not permit to install the 10.2.1, only 11.
I would like to download to the internal memory the Recovery 4 (6.0.3.6), but as I don't have keyboard (wrong GApps installed), can't write the web address. And the external SD card doesn't work too.
The only solution I see is ADB, but when I plug the Nook HD to the PC, nothing happens. There is no change in the Management console of Administration Devices....
Don't know really what to do.!
Click to expand...
Click to collapse
Did you go to my HD/HD+ CWM thread linked in my signature and make a bootable CWM SD per item 1a there? If you did, what are the results?
Sent from my BN NookHD+ using XDA Premium HD app
Thank you for your response.
I did what you said, making a bootable CWM as your 1a tip, but nothing happens.
The external SD card is like death.
The Nook boots on the normal CM11 mode, and never on the Card Boot mode.
But I have made some new advancement:
I realized that I can connect the Nook and the computer through Bluetooth!
So I sent to the Nook the correct GApps for the CM11, and reboot in recovery mode, installed it from the internal memory, and now I have keyboard again.
The situation now: I have the CM11-M6 installed, Recovery 6.0.4.6 and GApps gapps-kk-20140105.
But, the external SD card doesn't work. The Nook detects it, but can not activate it.
If I enter the Recovery mode, you can´t mount or format the SD card.
I have saved at the PC the Nook Stock Backup I made before rooting the Nook.
If I copy that folder to the internal memory and make a Restore BackUp, do you think that the SD card problem should be fixed?
May be the SD card problem is related to the Nook partitions. I read something about that but don't remember where. But don't really now if the Restore Stock is going to fix the partitions.
I don't want to make another step without consulting you!
Thanks!
Errabundo said:
Thank you for your response.
I did what you said, making a bootable CWM as your 1a tip, but nothing happens.
The external SD card is like death.
The Nook boots on the normal CM11 mode, and never on the Card Boot mode.
But I have made some new advancement:
I realized that I can connect the Nook and the computer through Bluetooth!
So I sent to the Nook the correct GApps for the CM11, and reboot in recovery mode, installed it from the internal memory, and now I have keyboard again.
The situation now: I have the CM11-M6 installed, Recovery 6.0.4.6 and GApps gapps-kk-20140105.
But, the external SD card doesn't work. The Nook detects it, but can not activate it.
If I enter the Recovery mode, you can´t mount or format the SD card.
I have saved at the PC the Nook Stock Backup I made before rooting the Nook.
If I copy that folder to the internal memory and make a Restore BackUp, do you think that the SD card problem should be fixed?
May be the SD card problem is related to the Nook partitions. I read something about that but don't remember where. But don't really now if the Restore Stock is going to fix the partitions.
I don't want to make another step without consulting you!
Thanks!
Click to expand...
Click to collapse
I doubt it is a partition problem causing the SD read issue. But getting back to stock may help. It could just be a glitch with CM11. You might also try cleaning the SD contacts and blowing out the slot with air.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You might also try cleaning the SD contacts and blowing out the slot with air.
Click to expand...
Click to collapse
Thanks again.
I tried three different cards from 3 brands. They all work perfectly at the computer, but not on the Nook!
I've not tried to blow air in the slot... i'll do it
I think, if that doesn't work, i'll try to go to the Stock Backup.
Thx
How can I restore the saved backup?
I have copied the backup folder yo the internal memory. After I boot into recovery. I choose Restore, but directly it says that there is no file.
Is there any special way of restoring the stock backup without using the sd card?
Enviado desde mi SM-N9005 mediante Tapatalk
Errabundo said:
How can I restore the saved backup?
I have copied the backup folder yo the internal memory. After I boot into recovery. I choose Restore, but directly it says that there is no file.
Is there any special way of restoring the stock backup without using the sd card?
Enviado desde mi SM-N9005 mediante Tapatalk
Click to expand...
Click to collapse
Yes it has to be put in a special place for CWM to see it. CM and CWM use different spots for the backups. CM uses /data/media/0/clockworkmod/backup and CWM uses /data/media/clockworkmod/backup. Notice the extra 0 folder. You will have to use your root file manager to be able to put the backup in the correct location so CWM can find it.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Yes it has to be put in a special place for CWM to see it. CM and CWM use different spots for the backups. CM uses /data/media/0/clockworkmod/backup and CWM uses /data/media/clockworkmod/backup. Notice the extra 0 folder. You will have to use your root file manager to be able to put the backup in the correct location so CWM can find it.
Click to expand...
Click to collapse
I have no success!
As I'm using CWM, I have to place the files at /data/media/clockworkmod/backup/.
I have some questions (I've tried all possibilities, but without success)
1. I have a saved backup folder (named with the date I made the backup) with .tar archives, etc. Do I have to place at the clockworkmod/backup the .tar files directly or the backup saved folder?
2. I can't find the /data/media/clockworkmod/backup folder.
I have a clockworkmod folder at /storage/sdcard0/clockworkmod. It seems to be the same as /mnt/sdcard/clockworkmod.
That clockworkmod folder is at the sdcard folder, with other folder as Alarms, Android, DCIM, etc...
At the folder level where are folders like bootdata, cache, mnt, root, etc, there is a folder named "data", but is empty, and can't write inside it.
Is it that one where I have to place /data/media/clockworkmod/backup/??
3. Can't find a folder called "media".
4. I have installed your file NookHD-CWM-6036-for-internal-memory-rev2-(03-08-14).zip as Recovery.
But I have read at your tips, that for restoring the Stock, you have to use NookHD-emmc-stock-recovery-rev0-(07.21.13). I have done nothing with that file... Is for your information, in case I'm doing something wrong.
5. As information also, when I enter the Recovery mode (6.0.3.6), there is always a message "Warning: No file_contexts".
6. Another thing!! I think that the Backup I'm trying to Restore was made with a previous CWM... that one for the CM10.1 (may be it was CWM-Recovery-2).
Could it be the problem?
Thanks again!
Errabundo said:
I have no success!
As I'm using CWM, I have to place the files at /data/media/clockworkmod/backup/.
I have some questions (I've tried all possibilities, but without success)
1. I have a saved backup folder (named with the date I made the backup) with .tar archives, etc. Do I have to place at the clockworkmod/backup the .tar files directly or the backup saved folder?
2. I can't find the /data/media/clockworkmod/backup folder.
I have a clockworkmod folder at /storage/sdcard0/clockworkmod. It seems to be the same as /mnt/sdcard/clockworkmod.
That clockworkmod folder is at the sdcard folder, with other folder as Alarms, Android, DCIM, etc...
At the folder level where are folders like bootdata, cache, mnt, root, etc, there is a folder named "data", but is empty, and can't write inside it.
Is it that one where I have to place /data/media/clockworkmod/backup/??
3. Can't find a folder called "media".
4. I have installed your file NookHD-CWM-6036-for-internal-memory-rev2-(03-08-14).zip as Recovery.
But I have read at your tips, that for restoring the Stock, you have to use NookHD-emmc-stock-recovery-rev0-(07.21.13). I have done nothing with that file... Is for your information, in case I'm doing something wrong.
5. As information also, when I enter the Recovery mode (6.0.3.6), there is always a message "Warning: No file_contexts".
6. Another thing!! I think that the Backup I'm trying to Restore was made with a previous CWM... that one for the CM10.1 (may be it was CWM-Recovery-2).
Could it be the problem?
Thanks again!
Click to expand...
Click to collapse
In order to access the /data folder you have to be using a root file manager (try root browser lite from Play Store). That is why /data looks empty without one.
Do not use the clockwork folder in /sdcard. It must be the one in /data/media.
That stock recovery zip is for restoring stock recovery. You only flash that if you want internal CWM replaced with stock recovery.
And under backup should be the folder that was created when you backed up. Usually a date. The .tar files are inside that.
Don't worry about the last two items.
Sent from my BN NookHD+ using XDA Premium HD app
821
Wow, I'm sooooo noob!!
I had already installed ES3 file explorer, and didn't find the Root User mode. Now it's activated and really can see the data/media folder.
I'm moving now the backup folder to the media folder and in some minutes I post the results (I see that It's very slow and the backup is 2gb size, and will take at least 30minutes to transfer)
Many thanks!!!
Welllll....:crying::crying::crying::crying:
I have successfully restored the Nook to the Stock Rom.
But the problem with the SD Card persists.
I bought a new SD Card, and now I have 4 different brands and sizes cards.
And with all of them I have the same issue: Damaged card. You have to format it. And after formatting, always "Damaged card"...
:crying::crying::crying:
I think is a hardware problem. Something is broken...
Thank you anyway for your help!!!
Errabundo said:
Welllll....:crying::crying::crying::crying:
I have successfully restored the Nook to the Stock Rom.
But the problem with the SD Card persists.
I bought a new SD Card, and now I have 4 different brands and sizes cards.
And with all of them I have the same issue: Damaged card. You have to format it. And after formatting, always "Damaged card"...
:crying::crying::crying:
I think is a hardware problem. Something is broken...
Thank you anyway for your help!!!
Click to expand...
Click to collapse
Time for a warranty exchange.
Sent from my SCH-i705 using XDA Premium HD app
Hey all,
I recently reverted back to stock and am now trying to restore one of my backups using Safestrap. I have 3 backups available in my TWRP folder on my SD card, but when I try to do a restore of the one I want I get the following error: "E: No partition selected for restore". How do I go about getting this backup installed? Thanks in advance for the help!
moodaddy said:
Hey all,
I recently reverted back to stock and am now trying to restore one of my backups using Safestrap. I have 3 backups available in my TWRP folder on my SD card, but when I try to do a restore of the one I want I get the following error: "E: No partition selected for restore". How do I go about getting this backup installed? Thanks in advance for the help!
Click to expand...
Click to collapse
I bet your Ex SD card is corrupt that happened with me.
If you have an adapter I'd transfer the contents of the SD card to your computer then get another card and transfer files from pc back on new card that's what I had to do
OPOfreak said:
I bet your Ex SD card is corrupt that happened with me.
If you have an adapter I'd transfer the contents of the SD card to your computer then get another card and transfer files from pc back on new card that's what I had to do
Click to expand...
Click to collapse
But the odd thing is I have a newer backup of the one I did when I reverted to stock and that restore works fine..The backup I want to restore is my rooted/debloated version and that is the one where I get the error message.
Real noob question here, but do I have to delete everything except for SD Card in Safestrap when doing a restore or should I just be able to select the backup and hit restore?
moodaddy said:
Real noob question here, but do I have to delete everything except for SD Card in Safestrap when doing a restore or should I just be able to select the backup and hit restore?
Click to expand...
Click to collapse
Just hit restore and pick the backup you want