Hey guys im trying to root and install a rom on my phone im using the all in one kit. I followed the instructions but when ever i try and get the token ID it says the device is not connected? I really want to do this so any and all help is very much appreciated.
Did you put the phone into debugging mode before plugging it in?
Sent from my De-Sensed HTC Vivid using xda premium
Funny thing was it was already enabled. AS of tried turning it off and then on again. Still get the same thing.
Sent from my HTC PH39100 using Tapatalk 2
Any one else have any ideas that might help.
Sent from my HTC PH39100 using Tapatalk 2
When you are in fastboot does it show "fastboot usb"?
Sent from my HTC PH39100 using xda premium
Make sure that you have the drivers installed on your computer, and that the HTC Sync client is NOT running. When your phone is in fastboot, make sure it says FASTBOOT USB when plugged in. Otherwise, that identifies a connection issue (like not having the drivers installed, or a bum USB port or some such).
Also, for troubleshooting purposes, make sure you're plugged directly into a USB port, and not through a hub or extension.
ess.boyer said:
Make sure that you have the drivers installed on your computer, and that the HTC Sync client is NOT running. When your phone is in fastboot, make sure it says FASTBOOT USB when plugged in. Otherwise, that identifies a connection issue (like not having the drivers installed, or a bum USB port or some such).
Also, for troubleshooting purposes, make sure you're plugged directly into a USB port, and not through a hub or extension.
Click to expand...
Click to collapse
I tried it again on another computer and it worked this time. I dont know what was up with it before.
Thanks for the help guys.
Related
I 've downloaded the LG thrill driver and everytime I connect the phone to my pc, drives E and F pop up but when I click on them it says please insert disk into drive. I've formatted the F drive and still the same thing. Any suggestions would be greatly appreciated.
s0urc3f0ur said:
I 've downloaded the LG thrill driver and everytime I connect the phone to my pc, drives E and F pop up but when I click on them it says please insert disk into drive. I've formatted the F drive and still the same thing. Any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
Did you mount them on your phone? In your notification bar, there should be a notification that you connected a USB and if you click on it, it should give you the option to connect to the PC.
Yes. I clicked the option to enable usb on the phone.
s0urc3f0ur said:
Yes. I clicked the option to enable usb on the phone.
Click to expand...
Click to collapse
When you installed the drivers, did it show that all of them were successfully installed? Maybe try re-installing them?
Did you go into sd and storage settings and uncheck mass storage mode only? Uncheck that to enable the other usb modes and devices.
Sent from my LG-P925 using XDA App
so i re-installed the drivers and made sure mass storage was unchecked and i still get the same thing. only this time the phone shows up in the devices window, but i can't do anything with it excpet view the properties of the phone. Is there some sort of software interface that i need to dl? Thank you again for your assistance
What operating system are u on. I connected mine without manually installing any drivers on windows 7
Sent from my LG-P925 using xda premium
windows 7 as well.
Which cable are you using? have you tried a different one?
when you put the drivers on did you manually install them or did you run through the process windows does after plugging in the phone
And are you positive you got the correct drivers? Remember...uninstall the old drivers before attempting new install
Sent from my SAMSUNG-SGH-I997 using XDA App
00mred00 said:
Which cable are you using? have you tried a different one?
Click to expand...
Click to collapse
I tried using the cable that came with it, as well as an extra one i had laying around
00mred00 said:
when you put the drivers on did you manually install them or did you run through the process windows does after plugging in the phone?
Click to expand...
Click to collapse
I ran the setup wizard for them
00mred00 said:
And are you positive you got the correct drivers? Remember...uninstall the old drivers before attempting new install
Click to expand...
Click to collapse
I'm pretty sure they are the right drivers, and yes I uninstalled them
after trying to hook up my wife's inspire and getting the same result, I believe it's my computer, I just don't know what it is.
Bad USB port? Do you have another PC you can use?
Sent from my LG-P925 using XDA App
Well I fixed it! The solution was to simply re-boot my PC with the phone plugged in! Thank you all again for your suggestions!
I have tried both 64 and 34 bit drivers from Designgears odin one click stock ROM.
and cant get it to work!!! I am on Vista 64 Bit system
I need help!!
b-eock said:
I have tried both 64 and 34 bit drivers from Designgears odin one click stock ROM.
and cant get it to work!!! I am on Vista 64 Bit system
I need help!!
Click to expand...
Click to collapse
Try these: http://downloadcenter.samsung.com/c...3/SGH-i897_Captivate_USB_Drivers_5_02_0_2.zip
Drivers straight from samsung.
Edit: if you are trying to mount your phone as USB drive and are on miui or cm7 you need to install the nexus s drivers then. Samsung drivers will still work for download mode. A computer restart sometime does wonders too.
Sent from my SGH-I896 running MIUI.
I forgot I used those already too.
Sent from my HTC Inspire 4G using XDA App
When you installed the drivers, did you right click and run as administrator?
It would be helpful to know what mode you are trying to connect in, download mode, usb mass media, usb drive or tethering. Did you install heimdall by any chance? On your phone switch to a different option under usb settings and see if your computer will detect your phone then. Sometimes if you install a new rom, usb drive wont work until you switch it to mass media then back to usb drive.
Sent from my SGH-I896 running MIUI.
I had to grant administrator permission when I ran the installation, but I didn't right click and give it permissions from the start.
And I'm trying to connect in download mode.
Its only on eclair that it doesn't wanna see the phone, idk why. It saw it on MIUI(on I897 GB BL) but not on eclair/froyo BL
Sent from my I897 using xda premium
Have you tried downloading Kies (the full version, not mini) and reinstalling the drivers that come with it (they are under tools)?
I will try that, would you link me to it, cuz the last full kies I put on was in Chinese
I'm on my mobile. Go to Samsung home page. At the very bottom, you will see a tiny US flag. Click that, and you can change your location to the UK. Then just go to support
Thanks!!, I spanked your thank key!
Kies Mini is the only one that shows up for the Captivate specifically.
I dont see a full kies.
Didnt work..
Have you tried different cables? Different USB Ports? I'm beginning to think it may be a hardware problem, not software.
Had same problem before. It was the crappy USB cable u get with the phone. Switched it with a better cable and had no problems after that.
Sent from captivate running fasty 1.3
fastlude said:
Had same problem before. It was the crappy USB cable u get with the phone. Switched it with a better cable and had no problems after that.
Sent from captivate running fasty 1.3
Click to expand...
Click to collapse
The cable isnt crappy it like everything else gets worn out with regular use. Kinda like my knees.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I haven't tried a different cable, I will now., but it has never(not once) given me issues on my old computer(win XP)
I've had the same issue before. Get pdanet. That fixed it. and now I never have recognition issues (just don't forget to make sure usb debugging is enabled).
Crazy thing happened. I deleted all traces of Samsung from my computer and then restarted and left alone for awhile, then Viola it worked(WTF!!!!) I dont even have the drivers installed( after uninstalling them I deleted all Samsung Folders in Program files and Program Files(x86).
Its weird but im happy now thanks all of you for helping !!!!!!!!!
I also used my little Bro's HTC Inspire Cable instead of the OEM cable.
Did u try it with the other cable when u did this? Or with the stock cable?
Sent from my SAMSUNG-SGH-I897 using XDA App
I would buy a new cable on Amazon. Stock cable is literally less than$2
Trying to unlock my bootloader, but when in bootloader mode and plugging my HTC one into my computer it saids "USB not Recognized."
Does anyone have any solutions for this? Can't seen to find one
Also side question, does rooting my phone hamper my ability to get system updates from HTC?
Do you have htc driver installed?
However, yes, you will lose OTA update from HTC
Guich said:
Do you have htc driver installed?
However, yes, you will lose OTA update from HTC
Click to expand...
Click to collapse
Yes I do, installed sync manager and everything. Not sure whats wrong
T3hBraveBoss said:
Yes I do, installed sync manager and everything. Not sure whats wrong
Click to expand...
Click to collapse
adb will recognize your phone?
However, which os you have?
Make sure you're plugged into a USB 2.0 port. 3.0 ports don't work with ADB on my laptop.
PcFish said:
Make sure you're plugged into a USB 2.0 port. 3.0 ports don't work with ADB on my laptop.
Click to expand...
Click to collapse
I have a Retina MacBook Pro, all my ports are USB 3.0
Guich said:
adb will recognize your phone?
However, which os you have?
Click to expand...
Click to collapse
4.1 For the HTC One
T3hBraveBoss said:
I have a Retina MacBook Pro, all my ports are USB 3.0
Click to expand...
Click to collapse
Oh, I've never worked on a mac before, but my HP Envy running Windows 8 would give me that message when I tried to do anything in a 3.0 port, but my 2.0 port works fine.
PcFish said:
Oh, I've never worked on a mac before, but my HP Envy running Windows 8 would give me that message when I tried to do anything in a 3.0 port, but my 2.0 port works fine.
Click to expand...
Click to collapse
Im running Windows 8 on it
Ok, tried some minutes ago, with an usb 3.0 it will not work...
Maybe, if someone have a mac, can confirm this.
Guich said:
Ok, tried some minutes ago, with an usb 3.0 it will not work...
Maybe, if someone have a mac, can confirm this.
Click to expand...
Click to collapse
So its directly related to USB 3.0.
"sigh" gotta pull out my old windows laptop then
Mac is basically linux, and from my experience with linux, you need to configure some stuff in order to get things working, i'm on the phone right now so i don't have a link to share but i recommend looking online.for.a tutorial to build AOSP from source on linux or MAC, there you will.find the steps needed to set up your USB configuration, ignore the rest after the config or.what is not needed.
Hope this helps.
Sent from my HTC One using xda app-developers app
Lexmazter said:
Mac is basically linux, and from my experience with linux, you need to configure some stuff in order to get things working, i'm on the phone right now so i don't have a link to share but i recommend looking online.for.a tutorial to build AOSP from source on linux or MAC, there you will.find the steps needed to set up your USB configuration, ignore the rest after the config or.what is not needed.
Hope this helps.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I use windows on my mac, I use windows 8
I was unable to unlock on my mac. I found you just had to jiggle the micro usb connector and it was detected
Sent from my HTC One using xda premium
PcFish said:
Make sure you're plugged into a USB 2.0 port. 3.0 ports don't work with ADB on my laptop.
Click to expand...
Click to collapse
There's a fix for that! Follow this guide here and you should be all set.
evilcuber said:
I was unable to unlock on my mac. I found you just had to jiggle the micro usb connector and it was detected
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Does this mac have USB 3.0?
Does anyone have any solutions
If you do a search on xda theres new drivers posted specifically for guys having usb issues with 64 bit windows 8.
Can't remember where exact I saw it myself or I'd post a link.
Sent from my fOne using xda premium
Guich said:
Ok, tried some minutes ago, with an usb 3.0 it will not work...
Maybe, if someone have a mac, can confirm this.
Click to expand...
Click to collapse
I am having the same problem with my asus and mac laptops. They both have the usb 3.0 and they wont read my htc one when in fastboot. Did anyone figure out a way around it?
I have an HTC ONE att
T3hBraveBoss said:
Trying to unlock my bootloader, but when in bootloader mode and plugging my HTC one into my computer it saids "USB not Recognized."
Does anyone have any solutions for this? Can't seen to find one
Also side question, does rooting my phone hamper my ability to get system updates from HTC?
Click to expand...
Click to collapse
I ws installing a Ruu zip but process got failed and hboot version changed to 1.54.000 . my device is in now relocked status and bootloader is not reconised by hp envy. adb still showing my device my i lost fastboot mode completely. Any solution there???
I already tried several drivers method. Error is something HTCAND4 in driver events log.
In order to find my cidnum..I did all the procedures..But when I type the fastboot command in the cmd. It stays "Waiting for device" only..But my device is not detected(my phone was in the fastboot mode)..I can see a notification in my pc that the usb is not recognized.I installed the latest sync manager that came with the phone and its of course up-to-date..I see no problem with my procedure...Did I miss something or do I have to do something else??help someone!!!
Neo_92 said:
In order to find my cidnum..I did all the procedures..But when I type the fastboot command in the cmd. It stays "Waiting for device" only..But my device is not detected(my phone was in the fastboot mode)..I can see a notification in my pc that the usb is not recognized.I installed the latest sync manager that came with the phone and its of course up-to-date..I see no problem with my procedure...Did I miss something or do I have to do something else??help someone!!!
Click to expand...
Click to collapse
1. You need to be on the bootloader screen for fastboot to work
2.try uninstalling HTC sync and try again
didn't help
I m running the windows 8.1 preview version..is that a problem??
Neo_92 said:
didn't help
I m running the windows 8.1 preview version..is that a problem??
Click to expand...
Click to collapse
Yes, drivers don't work in 8.1 yet
EddyOS said:
Yes, drivers don't work in 8.1 yet
Click to expand...
Click to collapse
Now i m in ubuntu 13.04..I m pretty sure there is no driver issues in this os..But stuck with the same problem..I can boot in to bootloader menu by using adb reboot-bootloader..But in bootloader when I type fastboot getvar cid,it stucks here "waiting for device"..I m dying to know my htc one's cid..Please help..Do I have to unlock the bootloader??(Sorry if the question was dumb)
I know how to solve this problem! Your HTC One will not work with USB2 port! connect it to the USB3 and youre done... will work even with win8.1 [MAYBE]
Rocker19943 said:
I know how to solve this problem! Your HTC One will not work with USB2 port! connect it to the USB3 and youre done... will work even with win8.1 [MAYBE]
Click to expand...
Click to collapse
I don't even know how does this make sense. I use USB 2.0 port all the time to connect my One to the PC and got no problem with that.
Sent via my HTC One™
MrKudinGTO said:
I don't even know how does this make sense. I use USB 2.0 port all the time to connect my One to the PC and got no problem with that.
Sent via my HTC One™
Click to expand...
Click to collapse
Mine doesnt work with usb2... Only usb3
Sent from my HTC One using xda premium
My laptop only has USB 3.0 ports. I could get HTC sync to work fine, but the PC wouldn't recognize the phone when in the bootloader. I was struggling to find an answer until I came across this blog and this worked flawlessly. The problem is with the Microsoft USB 3 host controller. This method replaces 2 Microsoft drivers with Intel drivers.
http://plugable.com/2012/12/01/windows-8-and-intel-usb-3-0-host-controllers
Follow this to a T. It does require rebooting the PC to disable driver signing, so make sure you bookmark the link to go back to it after you rebooted. If this helps you, just press the thanks button!
Sent from my HTC One using xda premium
born_fisherman said:
My laptop only has USB 3.0 ports. I could get HTC sync to work fine, but the PC wouldn't recognize the phone when in the bootloader. I was struggling to find an answer until I came across this blog and this worked flawlessly. The problem is with the Microsoft USB 3 host controller. This method replaces 2 Microsoft drivers with Intel drivers.
http://plugable.com/2012/12/01/windows-8-and-intel-usb-3-0-host-controllers
Follow this to a T. It does require rebooting the PC to disable driver signing, so make sure you bookmark the link to go back to it after you rebooted. If this helps you, just press the thanks button!
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I guess U r right..But sadly all the USB ports in my laptop are Usb 2.0..lost all hope
Neo_92 said:
I guess U r right..But sadly all the USB ports in my laptop are Usb 2.0..lost all hope
Click to expand...
Click to collapse
Did you click on fastboot in bootloader?
a box of kittens said:
Did you click on fastboot in bootloader?
Click to expand...
Click to collapse
of course I did click the fastboot in the bootloader.But I really cant believe that the fastboot mode of htc one works only on USB 3.0 port..because the access to the internal storage of the phone is flawless with usb 2.0 port
Neo_92 said:
of course I did click the fastboot in the bootloader.But I really cant believe that the fastboot mode of htc one works only on USB 3.0 port..because the access to the internal storage of the phone is flawless with usb 2.0 port
Click to expand...
Click to collapse
Actually it's the other way around. Fastboot plays nicer with USB 2.0.
Sent from my HTC One using xda premium
I have spent Friday and Saturday trying to get drivers installed on my Nexus 6. I have removed, uninstalled, added Google drivers, added sdk adb, computer needs to be returned Monday and this new Toshiba Satellite with one usb port with not recognize my phone. Even though the computer beeps every time I plug it in or out.
Any steps or detailed procedures would be greatly appreciated. Thank you!
Sent from my SGH-I337 using Tapatalk
Try using the Wug Fresh Root Toolkit in the Development section for the Nexus 6. Just make sure you follow the instructions. There are several different ways to find the correct drivers with his Toolkit. Good luck!
dave2metz said:
Try using the Wug Fresh Root Toolkit in the Development section for the Nexus 6. Just make sure you follow the instructions. There are several different ways to find the correct drivers with his Toolkit. Good luck!
Click to expand...
Click to collapse
Thanks man, but that's how I unlocked and rooted my phone. It's also how I screwed my phone up, trying to undo the forced encryption. Did it all with Wug's Nexus Tool Kit. I have been at this 25 hours with no success. Drivers are needed. I don't know why the computer doesn't recognize the phone, the computer beeps every time I plug it in or unplug it.
Sent from my SGH-I337 using Tapatalk
addcancercat said:
I have spent Friday and Saturday trying to get drivers installed on my Nexus 6. I have removed, uninstalled, added Google drivers, added sdk adb, computer needs to be returned Monday and this new Toshiba Satellite with one usb port with not recognize my phone. Even though the computer beeps every time I plug it in or out.
Any steps or detailed procedures would be greatly appreciated. Thank you!
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I always have issues with Nexus devices being recognized. I always have to plug the device in, go to the device manager, and delete anything that has to do with the device, including any labeled as ADB devices. I've also found it helps to go to "View" and hit "Show Hidden Devices". After deleting them all, I unplug and replug the device and install the Universal Naked Driver from this thread.
addcancercat said:
I have spent Friday and Saturday trying to get drivers installed on my Nexus 6. I have removed, uninstalled, added Google drivers, added sdk adb, computer needs to be returned Monday and this new Toshiba Satellite with one usb port with not recognize my phone. Even though the computer beeps every time I plug it in or out.
Any steps or detailed procedures would be greatly appreciated. Thank you!
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I assume with it being a Toshiba Satellite its running windows, what version? The older OS's seemed to be less finicky then W8, Have you deleted and re-installed the google drivers from http://developer.android.com/sdk/win-usb.html or from another site? Have you tried any different PC's? Have you checked the windows hardware event logs for any error messages? Have you been able to put in say a thumb drive into the usb port and it work? Are you on as admin and all that security crap? Do you have usb debugging on in the developer area on the phone? Are you able to get it into fastboot mode? If you do fastboot devices does it show anything at all? I assume you have rebooted the PC, but I'm still surprised how many issues that fix's.
Just some suggestions, I know how frustrating it can be. Good luck.
Thanks. I did that and I downloaded an Intel driver so now the computer recognizes the phone in Device Manager.
Sent from my SGH-I337 using Tapatalk
jackpollard said:
I assume with it being a Toshiba Satellite its running windows, what version? The older OS's seemed to be less finicky then W8, Have you deleted and re-installed the google drivers from http://developer.android.com/sdk/win-usb.html or from another site? Have you tried any different PC's? Have you checked the windows hardware event logs for any error messages? Have you been able to put in say a thumb drive into the usb port and it work? Are you on as admin and all that security crap? Do you have usb debugging on in the developer area on the phone? Are you able to get it into fastboot mode? If you do fastboot devices does it show anything at all? I assume you have rebooted the PC, but I'm still surprised how many issues that fix's.
Just some suggestions, I know how frustrating it can be. Good luck.
Click to expand...
Click to collapse
No, I have a Nexus 6 that the computer won't recognize. ADB and SDK also don't recognize the phone.
I am using my old Samsung S4 for emergency support. It's not hooked up with AT&T since I got the Nexus 6. I have to return this computer tomorrow. I am starting to wonder if it's computer problems with phone problems.
Sent from my SGH-I337 using Tapatalk
When you type ADB command in the DOS Box, there should be a popup on the mobile whether you wanna allow access from this computer.
Did you select yes and remember that PC?
I had this problem when I did my nexus 6, something on the laptop I was using was conflicting, I moved to another laptop and it worked like a charm never went back to figure out what was conflicting. Do you have access to another machine?