im now in xxlsa the stock version and i tried to install hydra core 7 and when i finished the phone stucked on the start and he said ANDROID IS UPGRADING.
any ideas?
idoguy said:
im now in xxlsa the stock version and i tried to install hydra core 7 and when i finished the phone stucked on the start and he said ANDROID IS UPGRADING.
any ideas?
Click to expand...
Click to collapse
Flash the rom again
No other kernel except philz work with jb leaks
its ok i flashed stock rom and now i going to try supernexsus rom.
thanks anyway
idoguy said:
im now in xxlsa the stock version and i tried to install hydra core 7 and when i finished the phone stucked on the start and he said ANDROID IS UPGRADING.
any ideas?
Click to expand...
Click to collapse
idoguy said:
its ok i flashed stock rom and now i going to try supernexsus rom.
thanks anyway
Click to expand...
Click to collapse
Hydracore is not compatible with leaked TW roms..thats why phone got stuck..only Philz kernel works with leaked TW roms as of now..
And Hydracore 7 its plagged with bugs and issues also..
Tapatalking on my n7000
Related
Hi,
I have stock ICS rom LP4 which custom rom is safe to flash?
I once tried to flash abyss kernel 4.2 it bricked my phone, i had my motherboard replaced.
So just wanted to confirm which custom rom's I can flash.
--->First flash a stock GB ROM of your country by following dr.Ketan's guide.
--->Since you have already once bricked you MB,I guess you wouldn't be feeling safe with a brickbug kernel so flash ROMs which use the CM9 kernel as base.The ones which I know about are-ParanoidAndroid,AOKP,MIUI,CM9(duh).
--->You can also try flashing ROMs which use franco kernel,speedmod kernel.
--->NEVER WIPE from a stock ICS kernel.
For more info on installing above ROMs check individual threads in the development section and follow the instructions word-for-word.
But i have heard downgrading also has problems
matharuajay said:
I once tried to flash abyss kernel 4.2 it bricked my phone
Click to expand...
Click to collapse
I really don't think abyss kernel bricked your device. There might be another reason...
matharuajay said:
But i have heard downgrading also has problems
Click to expand...
Click to collapse
Like ?
Flashing a stock GB ROM via PC Odin has absolutely no problems at all.
Yup flashed a GB rom now analysing which custom rom to flash
me also Mine should be arriving any time soon ! cant wait to flash Paranoid Android. Is it necessary to downgrade to GB if the Note comes with official ICS ?
I thought I just need to flash a safe kernel (abyss) then flash the ROM ?
NEVER flash CM9 release from an ICS kernel.
Sent from my GT-P1010 using XDA
Hello,
I am new to the XDAdevelopers forum and don't have much knowledge of rooting or installing customs roms to Android phones.
I currently own the Galaxy Note GT-N7000 and just looking around some videos I would love to have some customs rom installed on my phone, such as the new Jelly Bean roms that are out now.
I would love to know on how to root my Galaxy Note if there is a Noob Tutorial for rooting the galaxy note and maybe a Noob Tutorial on how to install Jelly Bean rom that is currently out (any suggestion on which rom would be great)
As I said I am a noob and don't have much knowledge on how to mod your android phones and any help would be greatly appreciated
FYI: Looked around the forums for the while, I couldn't find anything simple enough, I bet there is somewhere in the forum, not sure if I was looking correctly >.<
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
rajsekhar.300 said:
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
Click to expand...
Click to collapse
Thanks for replying do you have any links to the Kernals and JB roms ? and if there is any tutorial for them too
Thanks again for your time.
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
rajsekhar.300 said:
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
Click to expand...
Click to collapse
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Georific said:
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Click to expand...
Click to collapse
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
jeetu1981 said:
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
Click to expand...
Click to collapse
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
No.After you flash the kernel,you can install jb rom through cwm
Georific said:
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
Click to expand...
Click to collapse
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Georific said:
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Click to expand...
Click to collapse
As long as you are on any safe kernel you can flash any JB rom, no matter if you are on any TW ICS, GB or CM9/10 roms. I am on CM10 right now and flashed it directly on stock LRQ ICS with Speedmod kernel.
jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
You can find those additional files in the same link
Scroll down few posts and you can find it
jeetu1981 said:
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Click to expand...
Click to collapse
I got it to work for Odin I added the Kernal Hydra do I just press Flash Firmware ? Please REply ASAP
rajsekhar.300 said:
You can find those additional files in the same link
Scroll down few posts and you can find it
Click to expand...
Click to collapse
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Georific said:
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Click to expand...
Click to collapse
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
bad or good...
jeetu1981 said:
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
Click to expand...
Click to collapse
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Georific said:
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Click to expand...
Click to collapse
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
its works
jeetu1981 said:
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
Click to expand...
Click to collapse
The full wipe worked thanks so much man appreciate it for everything
Hi all,
I'm new in this forum. Now I'm already with ultimate v5.1 and want to upgrade to 4.1.2 Stock deodexed and rooted XXLSZ. I just want to make sure I can flash this rom directly in CWM with 3 wipes. Also, the Philz Kernel in ultimate v5.1 is safe, right? Hope someone can help.
Thanks.
Frankie
wannnnnabe said:
Hi all,
I'm new in this forum. Now I'm already with ultimate v5.1 and want to upgrade to 4.1.2 Stock deodexed and rooted XXLSZ. I just want to make sure I can flash this rom directly in CWM with 3 wipes. Also, the Philz Kernel in ultimate v5.1 is safe, right? Hope someone can help.
Thanks.
Frankie
Click to expand...
Click to collapse
why not use the 5.2 instead?
yes its safe,, use the option of "Clean before new rom flash" in Philz settings to completely clean the old rom.. take backups of whatever you want
jay185 said:
why not use the 5.2 instead?
Click to expand...
Click to collapse
The Note of my wife runs not smooth. Maybe installed too many apk. It's seems some issues with 5.2 and I would like to try the rom which make by eybee1970.
Hello..I'm facing this error after unrooting my Note GT N7000 with official ICS stock rom. Trying to solved it but not successfully. At last back to custom ROM and solved. Any idea why it's happened? [sorry for my english].
fne02 said:
Hello..I'm facing this error after unrooting my Note GT N7000 with official ICS stock rom. Trying to solved it but not successfully. At last back to custom ROM and solved. Any idea why it's happened? [sorry for my english].
Click to expand...
Click to collapse
you may not be doing a full wipe.. if you are.. then there is some problem with the rom or kernel... try downloading an official rom from sammobile.com and do use a safe kernel before flashing a ICS rom..'
1. flash a safe kernel like philz
2. do a full wipe
3. flash ICS rom using pc odin
y don't u flash JB stock or watch my video to get 4.2.2.. link in signature
Mayank Chandwani said:
you may not be doing a full wipe.. if you are.. then there is some problem with the rom or kernel... try downloading an official rom from sammobile.com and do use a safe kernel before flashing a ICS rom..'
1. flash a safe kernel like philz
2. do a full wipe
3. flash ICS rom using pc odin
y don't u flash JB stock or watch my video to get 4.2.2.. link in signature
Click to expand...
Click to collapse
I do full wipe but maybe something unsuitable for the kernel. I do see/watch your video and follow your link. Now I get a lot of information. Thanks buddy. By the way I'm already in Jelly Bean, I'm flashing ICS just for unrooting.
fne02 said:
I do full wipe but maybe something unsuitable for the kernel. I do see/watch your video and follow your link. Now I get a lot of information. Thanks buddy. By the way I'm already in Jelly Bean, I'm flashing ICS just for unrooting.
Click to expand...
Click to collapse
You can flash the stock JB to get unroot...
Mayank Chandwani said:
You can flash the stock JB to get unroot...
Click to expand...
Click to collapse
Orait..thnx.
Hi,
I've followed the guide to install the speedmod kernel on my Galaxy Note on http://forum.xda-developers.com/showthread.php?t=1673072, using odin, but I have a problem: after Odin said that all was good, the phone is unable to reboot and for 5-6 seconds stay with the screen with the "yellow triangle" and then shut-down.
How can I solve this problem?Or come back to original kernel?
Please help me!!
gunela88 said:
Hi,
I've followed the guide to install the speedmod kernel on my Galaxy Note on http://forum.xda-developers.com/showthread.php?t=1673072, using odin, but I have a problem: after Odin said that all was good, the phone is unable to reboot and for 5-6 seconds stay with the screen with the "yellow triangle" and then shut-down.
How can I solve this problem?Or come back to original kernel?
Please help me!!
Click to expand...
Click to collapse
What rom were you on?
nokiamodeln91 said:
What rom were you on?
Click to expand...
Click to collapse
I had the original rom!
gunela88 said:
I had the original rom!
Click to expand...
Click to collapse
Ofcourse.. but which one? JB, GB, ICS?
nokiamodeln91 said:
Ofcourse.. but which one? JB, GB, ICS?
Click to expand...
Click to collapse
I forgot to specify it: I had the original ICS rom
gunela88 said:
I forgot to specify it: I had the original ICS rom
Click to expand...
Click to collapse
You 100 % sure it was ICS? Install the rom you were on again using odin. Its will put back the original kernel. Just dont wipe while on ICS stock kernel.
nokiamodeln91 said:
You 100 % sure it was ICS? Install the rom you were on again using odin. Its will put back the original kernel. Just dont wipe while on ICS stock kernel.
Click to expand...
Click to collapse
I've check with my brother that has the same original rom (he has a Samsung S2)...and I discover that I had Android 4.1.2 that means JB! :/
Have I to install the JB rom with odin in the same way?
Thanks a lot for your help!
nokiamodeln91 said:
You 100 % sure it was ICS? Install the rom you were on again using odin. Its will put back the original kernel. Just dont wipe while on ICS stock kernel.
Click to expand...
Click to collapse
I've done what you said and ALL WORKS NOW!!
Thank you so much for your help!
Can you suggest me a good rom to install, without doing same errors!? (maybe this could be my last question! )
In this case you just have to flash the JB Speedmod kernel the same way you flash previous one. The phone is not booting because of having an ICS kernel on JB rom.
---------- Post added at 01:49 AM ---------- Previous post was at 01:47 AM ----------
gunela88 said:
I've done what you said and ALL WORKS NOW!!
Thank you so much for your help!
Can you suggest me a good rom to install, without doing same errors!? (maybe this could be my last question! )
Click to expand...
Click to collapse
If you want all the Samsung features then check AryaMod rom.
If you are OK with AOSP, cm 10.2 or omni 4.4 are great roms. It's up to you to try and decide which one suits you the best.
This time for rooting and cwm, use Philz kernel. Methods and explanation in his thread in the Original Development Section.
nokiamodeln91 said:
In this case you just have to flash the JB Speedmod kernel the same way you flash previous one. The phone is not booting because of having an ICS kernel on JB rom.
---------- Post added at 01:49 AM ---------- Previous post was at 01:47 AM ----------
If you want all the Samsung features then check AryaMod rom.
If you are OK with AOSP, cm 10.2 or omni 4.4 are great roms. It's up to you to try and decide which one suits you the best.
This time for rooting and cwm, use Philz kernel. Methods and explanation in his thread in the Original Development Section.
Click to expand...
Click to collapse
Sure, I'm very ok with AOSP and I was thinking about cm 10.2!
Please, clear me up if first of all I have to install the Philz kernel or the rom cm 10.2! (that wasn't the last question! )
First root using Philz kernel.. Then back up your efs folder. Then flash the rom or your choice. Custom rom can only be flashed using cwm recovery.
AryaMod v3 is very good and smooth stock LTA based TW rom. I'm on it since it was issued. As the owner set v4 will be issued in few days. You can try it.
Sent from my GT-N7000 using XDA Premium 4 mobile app