i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Which phone do you have? Can you go into recovery/download mode?
my phone is samsung galaxy s plus and yes i CAN go into recovery mode
Donovan662 said:
Which phone do you have? Can you go into recovery/download mode?
Click to expand...
Click to collapse
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Habescha said:
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Click to expand...
Click to collapse
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
thx i will try it but can you tell me where i went wrong? is it because i didnt delete kies on my windowspc? or anything special bec i would like to have ics on my phone...do you recommend cm9 instead of 10 because it didnt worked on my sgsplus or do you recommend me to try again...carefully of course ?
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
how can i find out my right firmware for my phone? or is it not important which i download?
Habescha said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Click to expand...
Click to collapse
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
thx though zou helped me a lot...now cm9 is working fine on my sgs plus...does cm10 works too im wondering bec i tried and it stocked after rebooting it
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
no i did all the steps wiping and deleting the data im pretty sure...cm9 is as i already said working fine....do you recommend to try to flash cm10 again on my phone bec im afraid to brick my phone...used the one of the xdaforum 2012-11-22: CM10 alpha4
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
educk said:
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Habescha said:
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Click to expand...
Click to collapse
I'm glad you managed to make it work.
educk said:
I'm glad you managed to make it work.
Click to expand...
Click to collapse
THX but ONE QUESTION?! does cm10 alpha 5 works without any problems? i mean can you go into youre mobile internet when youre outside? bec my phone with alpha 5 cm10 by ivendor does not work....:s i decided to flash the older alpha 4 until i found out the reason why it doesnt function...any guesses? =)
OK FOUND THE FIX ZIP ALREADY O XDA DDDDDD
ONE LAST THING : the vibration of the back and menu button is for me to hard....i found out that on my sgs plzs cm10 alpha 5 in settings-advanced there is NO VIBRATION setting in there, on my friends one there were several more options to choose!
is it maybe bec i flashed my phone with an older cwmrecovery?i think its 5.0 blabla...do i have to flash it again with the newer once 6.blabla?
thank you GUYS for youre quick help
help.....my xperia miro stuck at black screen after sony logo came out
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
AndrewLian said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
Do you have a Sony? Post then better in the threads for your phone.
This is section for Samsung Galaxy S
tetakpatalked from N7100
cm 10.2.1.3 installation failed
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
chinarredij said:
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
Click to expand...
Click to collapse
You have posted in wrong thread here.
tetakpatalked from 1+One
Related
i have the lg optimus black and i just rooted it but i dont know how to get in the recovery mode somebody can help me ?
tnx
Eword said:
i have the lg optimus black and i just rooted it but i dont know how to get in the recovery mode somebody can help me ?
tnx
Click to expand...
Click to collapse
Try downloading Rom manager from the market and then choose to rebbot in recovery mode
Download rom manager free, go in" install recovery", the app flash then the recovery partition for you,,
Sent from my LG-P970 using jelly bean
I have other question. I installed cwm and flashed some rom but now I am stuck on bootanimation bootloop because something went wrong. How can I go to recovery now to fix it?
Acuap said:
I have other question. I installed cwm and flashed some rom but now I am stuck on bootanimation bootloop because something went wrong. How can I go to recovery now to fix it?
Click to expand...
Click to collapse
Whats some rom? Be more precise please. You ll always be able to unbrick it using smartflash. But maybe you should simply use an unrooted rom... just use b2c tool and the option emergency recovery. And then first read, what you have to do, what it does and which kind of results you will be confronted with, then try again.
Dont mean to flame, but it seems you already did it wrong twice...
Sent from my LG-P970 using xda app-developers app
Nope. Once. My sdcard somehow unmounted itself while installing Marvel rom 9. Dunno why. Well, gonna try your method tomorrow. Thanks for tips!
Acuap said:
Nope. Once. My sdcard somehow unmounted itself while installing Marvel rom 9. Dunno why. Well, gonna try your method tomorrow. Thanks for tips!
Click to expand...
Click to collapse
have you already tried using G-recovery?
I think you can do it in Marvel ROM, you just have to start pressing for a few times the G button while booting
LGP970 said:
have you already tried using G-recovery?
I think you can do it in Marvel ROM, you just have to start pressing for a few times the G button while booting
Click to expand...
Click to collapse
Worked like charm. Thank you!
i have a rooted Galaxy Note N7000 with RocketRom v3 final by eybee. it has been smooth since then, but yesterday i have installed chainfire 3d on it. it says a warning that if i reboot it will stucked on reboot logo(maybe you have seen this for those who used chainfire3d already).
Now my phone got stucked up on boot logo. Please tell me what should i do? i have tried to repair it, i thought it was soft bricked, but i can't repair it anymore. any help please..thank you in advance..
What all have you done till now?
voidjov said:
i have a rooted Galaxy Note N7000 with RocketRom v3 final by eybee. it has been smooth since then, but yesterday i have installed chainfire 3d on it. it says a warning that if i reboot it will stucked on reboot logo(maybe you have seen this for those who used chainfire3d already).
Now my phone got stucked up on boot logo. Please tell me what should i do? i have tried to repair it, i thought it was soft bricked, but i can't repair it anymore. any help please..thank you in advance..
Click to expand...
Click to collapse
AFAIK, Chainfire 3D does not work on leaked JB roms..
nokiamodeln91 said:
What all have you done till now?
Click to expand...
Click to collapse
none until now. i really can't find any solution for this. please help me..
Shyam said:
AFAIK, Chainfire 3D does not work on leaked JB roms..
Click to expand...
Click to collapse
my bad.. but now i know. can someone help me resolve my problem?i can't use my phone..
voidjov said:
my bad.. but now i know. can someone help me resolve my problem?i can't use my phone..
Click to expand...
Click to collapse
Can you go into download mode?
And when yes: did you try to install a Stock Rom (with Odin on PC and download mode on your device)?
Find the thread by Dr Chetan who have provided all the procedure for going back to normal GB rooted rom...
Find his tool box too....
Sent from my GT-N7000 using xda premium
voidjov said:
none until now. i really can't find any solution for this. please help me..
Click to expand...
Click to collapse
if you can boot into recovery flash the Rocket Rom again using Wipes
ThaiDai said:
Can you go into download mode?
And when yes: did you try to install a Stock Rom (with Odin on PC and download mode on your device)?
Click to expand...
Click to collapse
yes i have done it already, but it shows FAIL on the upper left box when done.
voidjov said:
yes i have done it already, but it shows FAIL on the upper left box when done.
Click to expand...
Click to collapse
odin logs please
can you boot into recovery? did you try flashing the rocket rom again?
i have resolved it!!!
This may kindly serve as a reference to others. i did nothing, when i was so desperate and nothing seemed to work with my problem, i have tried to format the cache,system,preload,etc. on the recovery mode. then i installed the custom rom again and BOOM! now i can use my phone like it was never done to the latter stage hehe. by the way thanks to you all who posts their help, i have tried those too but at this time may desperation luckily works. thank you all!
may be next time before flashing anything using CWM, make a nandroid backup to revert back in case of disaster
So yeah i bricked my phone, its stuck in a damn bootloop and i cannot enter recovery no matter which one i install.
I even flashed stock rom via odin and tried both flashing twrp and cwm, none worked, whichever rom is installed i still get in a damn bootloop and i cannot boot into recovery (blank screen).
Is there anything i can do for my phone?
Thank you all in advance
Try to flash Dorimanx Kernel using Odin (v9.34 for JB Roms, v8. for Stock Roms)
I will upload a guide tomorrow for people facing problems with their recovery. I will edit this when its finished.
EDIT: Here it is: http://forum.xda-developers.com/showthread.php?t=2441940
Sent from my GT-I9100 using xda app-developers app
Hit Thanks please
OverkillSRB said:
So yeah i bricked my phone, its stuck in a damn bootloop and i cannot enter recovery no matter which one i install.
I even flashed stock rom via odin and tried both flashing twrp and cwm, none worked, whichever rom is installed i still get in a damn bootloop and i cannot boot into recovery (blank screen).
Is there anything i can do for my phone?
Thank you all in advance
Click to expand...
Click to collapse
can you tell me what did you do to caused that ? or do you have download mode ?
anyway it seems to me a hard break . probably you messed your boot . you got two options:
1.use "RescuePDA" (you can find the thread and every thing in galaxy mini II development)
2.take it to a service center
dlb4all said:
can you tell me what did you do to caused that ? or do you have download mode ?
anyway it seems to me a hard break . probably you messed your boot . you got two options:
1.use "RescuePDA" (you can find the thread and every thing in galaxy mini II development)
2.take it to a service center
Click to expand...
Click to collapse
Download mode is the only thing that works, as i said recovery wont boot and any rom i install is getting into a bootloop. ((
I used triangle away, the problems started after that. I had cwm and cm 10.1 08/18
Is there any way to factory reset using odin?
I have the same exact problem.
I follow the discussion with interest.
zeruel857 said:
I have the same exact problem.
I follow the discussion with interest.
Click to expand...
Click to collapse
Zeruel, i seem to have somehow fixed the problem, however not entirely.
I downloaded some random recovery rom, flashed it with odin and wiped everything (cache, factory reset, dalvik cache), and reinstalled cm 10.1.
Then i flashed back the thewhisp's recovery and booted into cm with no problem.
However now i cannot boot into recovery using volume+- and home and power button, i have to boot to it from the cm.
That i dont know how to solve, but at least my phone works fine
Thank you, but I think to have solved the problem with RescuePDA.
A big thanks go to dlb4all, thank you a lot mate.
zeruel857 said:
Thank you, but I think to have solved the problem with RescuePDA.
A big thanks go to dlb4all, thank you a lot mate.
Click to expand...
Click to collapse
no problem man . my pleasure :good:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
http://theunlockr.com/2012/10/22/how-to-root-the-samsung-galaxy-s-i9000-cf-kernel-method/
Click to expand...
Click to collapse
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Hello!
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Don't worry, it is just a digestion problem (bootloop). CF-root doesn't work with every firmware. If yours wasn't compatible, bootloop is normal reaction. Check my last thread and there you can find step-by-by step guide how to unbrick it.
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Here you go!!!
Don't worry. It is just a little thing.
Read my post here in the below given link. The solution is given in easiest steps.
forum.xda-developers.com/showthread.php?p=47034690#post47034690
Thank you so much guys it's working now, (even though I put the original one)!
I'll try to root it again asap!
tetakpatak said:
If yours wasn't compatible, bootloop is normal reaction.
Click to expand...
Click to collapse
How do I know if it's compatible or not? What should I check?
_Flasher_ said:
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
Click to expand...
Click to collapse
Sorry for the late reply: anyway no, the only thing I could do was watch the phone reboot and reboot and reboot and reboot and, finally, reboot
Thank you again!
BeNdErR said:
Thank you so much guys it's working now.
How do I know if it's compatible or not? What should I check?
Click to expand...
Click to collapse
Great, mate- I'm glad it works again
CF-Root is made AMAIK for Gingerbread ROMs only, and if you have Froyo it is enough to flash SpeedMod root kernel that already features CWM recovery, Busybox and SU. You should always ready very carefully the first posts of the files you flash, so you will void many potential problems.
If you did it after my unbrick guide thread, backup your IMEI No as soon as you root your phone (described how to)
Just click "thanks" button beyond posts which were useful for you, it is our way to express it on this forum (and many us here are visiting the forum to help each other)
GT-I9000 blackout, can only go to download mode after Odin
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
jaysonuao said:
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
Click to expand...
Click to collapse
Which Odin version did you use and what exacactly did you try to flash? Which system / Android version is installed om the phone?
tetakpatalked from N7100
So i tried installing MAHDI Rom and yes i wiped everything before installing but i got a error then now im stuck in a bootloop
i cant even flash my backup because i cant access CWM or totally close the phone because i cant remove the battery
anyone help me please !!!!
aliiahmed.20 said:
So i tried installing MAHDI Rom and yes i wiped everything before installing but i got a error then now im stuck in a bootloop
i cant even flash my backup because i cant access CWM or totally close the phone because i cant remove the battery
anyone help me please !!!!
Click to expand...
Click to collapse
flash a stock ROM with flashtools -> http://forum.xda-developers.com/showthread.php?t=2311964
lionboy12 said:
flash a stock ROM with flashtools -> http://forum.xda-developers.com/showthread.php?t=2311964
Click to expand...
Click to collapse
i cant enter fastboot mode bacause of the bootloop
aliiahmed.20 said:
i cant enter fastboot mode bacause of the bootloop
Click to expand...
Click to collapse
dont need only enter in Flashmode install flashtools and then use instruction
lionboy12 said:
dont need only enter in Flashmode install flashtools and then use instruction
Click to expand...
Click to collapse
yea in flashtool i need to go into flashmode and i cant because the phone wont turn off !
aliiahmed.20 said:
yea in flashtool i need to go into flashmode and i cant because the phone wont turn off !
Click to expand...
Click to collapse
conect to USB and then press reset button then is in flashmode
lionboy12 said:
conect to USB and then press reset button then is in flashmode
Click to expand...
Click to collapse
what reset button ?
i know that there is a restart button but it doesnt completly turn off the phone
aliiahmed.20 said:
what reset button ?
i know that there is a restart button but it doesnt completly turn off the phone
Click to expand...
Click to collapse
just do what i say conect USb and then press 5 sec Reset button then the phone will be in flashmode then disconect and make what you need with phone
lionboy12 said:
just do what i say conect USb and then press 5 sec Reset button then the phone will be in flashmode then disconect and make what you need with phone
Click to expand...
Click to collapse
okay so im flashing a ftf original firmware file right now
but do you have any idea why when i tried to install the rom it aborted and got me into this ?
aliiahmed.20 said:
okay so im flashing a ftf original firmware file right now
but do you have any idea why when i tried to install the rom it aborted and got me into this ?
Click to expand...
Click to collapse
that i dont know
lionboy12 said:
that i dont know
Click to expand...
Click to collapse
You are a Life saver my friend
I got out of the bootloop but i lost my root and the CWM and i dont know if the unlocked bootloader is working or not
aliiahmed.20 said:
You are a Life saver my friend
I got out of the bootloop but i lost my root and the CWM and i dont know if the unlocked bootloader is working or not
Click to expand...
Click to collapse
now you are on unlock BL , root with that http://forum.xda-developers.com/showthread.php?t=2440375
you can use fastboot mode to flash a custom kernal to use then CWM
lionboy12 said:
now you are on unlock BL , root with that http://forum.xda-developers.com/showthread.php?t=2440375
you can use fastboot mode to flash a custom kernal to use then CWM
Click to expand...
Click to collapse
yea i did that already but im afraid ill go through all this again when i try to flash any rom !
aliiahmed.20 said:
yea i did that already but im afraid ill go through all this again when i try to flash any rom !
Click to expand...
Click to collapse
Just try CM or PAC, those roms work fine. There was another case on here of somebody who had the same problem when flashing a MAHDI rom.
Just read the thread of the rom before you start flashing, or at least read the last 5-10 pages so you know what the status of a rom is about.
Hope you get a nice new rom on your phone! I'm using the CM10.1 29.10.2013 build from ubberlaggydarwin for a long time now without ANY problems, just working perfectly, it's here:
http://forum.xda-developers.com/showpost.php?p=46701602&postcount=1
Otherwise you might try FreeXperia roms. Up to you. Enjoy.
Robin>Hood said:
Just try CM or PAC, those roms work fine. There was another case on here of somebody who had the same problem when flashing a MAHDI rom.
Just read the thread of the rom before you start flashing, or at least read the last 5-10 pages so you know what the status of a rom is about.
Hope you get a nice new rom on your phone! I'm using the CM10.1 29.10.2013 build from ubberlaggydarwin for a long time now without ANY problems, just working perfectly, it's here:
http://forum.xda-developers.com/showpost.php?p=46701602&postcount=1
Otherwise you might try FreeXperia roms. Up to you. Enjoy.
Click to expand...
Click to collapse
i flashed Vanir AOSP and its flawless So thank you Guys for your help
this is one advice , if you want full stock rom just use Sony Update Service , you can download it official sony website
aliiahmed.20 said:
okay so im flashing a ftf original firmware file right now
but do you have any idea why when i tried to install the rom it aborted and got me into this ?
Click to expand...
Click to collapse
Maybe something wrong in the .zip-file. Happens when you try flashing a ROM you haven't fully downloaded