Whats about CyanogenMod 10.1 - Galaxy S I9000 Q&A, Help & Troubleshooting

I want not talk to much
Just want to create a topic where people can write their news about CM 10.1
I think such a thread could be interesting for people that heard from Android 4.2 - Jelly Bean
So let's start the topic
You can download the last UNOFFICIAL build of CM10.1 for SGS i9000 from:
http://forum.xda-developers.com/showthread.php?t=2013707
THIS BUILD NOT WORK PERFECT! - (26.11.12)

For most of us, simply flashing the 4.2 Gapps package is good enough already.

snapper.fishes said:
For most of us, simply flashing the 4.2 Gapps package is good enough already.
Click to expand...
Click to collapse
Maybe for you
Lots of people have been waiting for CM10.1

I installed that rom yesterday (and today i installed the new build) and it seems to work fine.
Except for me the swype-like keyboard isn't working, does anyone know where i can find known issues or bug reports for this rom?

sterfpaul said:
I installed that rom yesterday (and today i installed the new build) and it seems to work fine.
Except for me the swype-like keyboard isn't working, does anyone know where i can find known issues or bug reports for this rom?
Click to expand...
Click to collapse
you can ask in the post of the developer here:
http://forum.xda-developers.com/showthread.php?t=2013707

Same here
Everything I tried, except swype, working!
Keyboard working - but not the swype part

work fine fast nice interface
but i think it haven't a long battery life if i compare it with gingerbread
every thing is working fine for me with cgm 10

Related

[ROM] [MIUI 4.1] MiuiRyder - Miui 3.1.11 (JB) v1.1

Lucainno's I9000 MIUI 3.1.11 Port​
ROM DETAILS
Android JB 4.1.2
Miui 3.1.11
Semaphore 2.6.5v kernel
4 way reboot
Seeder 1.4 Preinstalled
My GPS fix installed
Install Notes:
From cwm-
Facotry reset
Format /system
Install from sdcard
<Google Apps not required>
Boot
Profit
NOTES:
Ive only ran this ROM for about a day so Ill list it as "beta" for now. Themes worked for me but I had to create an Xiaomi account.
MIUI 3.1.11 is Android 4.1.2 (NOT 4.2.*) So keep this in mind for kernels and such!
I had somewhat of a higher than normal battery drain the first night. Frankly Im not sure if it was the ROM or one of my apps going nuts. I could use some feedback on how the battery drain is from others. This is my first JB port so be gentle (lol). I used CM10 as a base and used Lucainno's MIUI ROM to adapt (or Miui'fy) it. Dont forget to click on the links below in my thanks section and hit the "thanks" for each. Hit them up for a donation if you can.
Mobile data automatically turns off on each boot. You must renable it each time.
Easiest way for me to get the camera to work was to install the CM10 Gallery app. Thats why you have 2 "gallery" apps listed.
Does 911 work?
Answer - I dont know. Its untested. I have the correct T959 RIL and GPS files installed. I checked the framework.jar and it seemed to be in order.
Does GPS work?
Works for me....kinda I will admit the locks were a lot slower than usual. My GPS "fixes" from another thread do not match 2 of the CM10 files. CM10 and CM10.1 differ by 2 gps in /system/lib/hw from what I can tell. It may work though.
Now Im not a developer, but I will still try to bugfix whatever I can.
CURRENT DOWNLOAD LINK
Nanadroid first but a simple flash without factory reset should upgrade from previous version (no-wipe)
OLDER RELEASES:
DOWNLOAD v1 LINK
Big thanks to: (please tell me if I missed you)
Lucainno (for ROM to port)
FaultException (for CM10 base)
Stratosk (for kernel)
CyanogenMod team
Miui team
:cyclops:
Change log
1/15/2013 - V1.1
edit build.prop for english
framwork.jar edits
services.jar edits
new Bootsplash
add a gps.xml normally not found. Flashing one of my "fixes" will delete it.
(You should be able to just flash it without wipe for upgrade)
Thanks man, When I have time this week, I'll be sure to flash and let you know how it goes.
Thanks man - I was going to play with this for a bit. For me the GPS just isn't working as well as Id like it too. Just not sure if its me.
Two of the .so files are different from CM10 to CM10.1 so Ill try to switch between the two. (/system/lib/hw/gps.aries.so & gps.goldfish.so)
Its a nice project to work on for the next few weeks.
Got too eager, and flashed it
Some things:
-Boot animation is TERRIBLE, sorry just had to get that out, I'm prob gonna just end up flashing a Nexus bootanimaion, they look cool
-Default language is DUTCH, and there's a popup right before selecting the default language, so I have NO IDEA what i agreed/disagreed to
So far, so good.
I can't really test GPS, almost got into a car accident once because of the faulty GPS on this, since then... no more taking chances, bought a nice GPS, runs great.
I'll give you more bugs/compliments after tomorrow.
Thanks for this btw, needed my monthly MIUI dosage.
That is odd - the build.prop is set to US and when I loaded it up it was in English. Ill look into it though.
Edit: Found it -
ro.product.locale.language=en (was set to "zh")
LOL - ok - ok Ill look into changing the bootanimation
Version 1.1 posted - should be a no-wipe version for those who already installed it.
NICE....
viber
unfortunately,viber has stopped
no work
Anyone have a multi-dpi playstore for this?
Changed my dpi to 201, playstore stopped showing most apps, flashed this and did not work.
For those who have time and can beta test for me:
MIUI 3.1.25
You need to flash the gapps (4.1 version) because I removed it from the ROM.
Feedback / bugs appreciated
I tried some GPS tweaks in some .jar files - Im not sure if it did anything though.
Downloading, gonna try it this week and I'll be back with my comments, really thankful with your hard work.
Best regards.
---------- Post added at 02:17 AM ---------- Previous post was at 01:33 AM ----------
First thought, thanks for the spanish language
I showed 85 downloads but no one tested it?
Ive been switching between Slim / Helly so Ill give this up.
AW: [ROM] [MIUI 4.1] MiuiRyder - Miui 3.1.11 (JB) v1.1
What about working together with kingsoft. He has also a miui rom out. Another idea to push a new JB 4.2 rom out , cherry picked from slim, hell and aokp
Sent from my SGH-T959 using xda app-developers app
This ROM is my new daily driver on my work phone.
Its very fast and stable.
No real issues yet.
It rebooted once by itself when plugged into my computer at work but it hasn't happened again so the incident may be isolated.
Thanks for an awesome ROM.
I'm pretty likely to stick with this one for quite a while.
Sent from my SGH-T959 using xda app-developers app
firefly6240 said:
This ROM is my new daily driver on my work phone.
Its very fast and stable.
No real issues yet.
It rebooted once by itself when plugged into my computer at work but it hasn't happened again so the incident may be isolated.
Thanks for an awesome ROM.
I'm pretty likely to stick with this one for quite a while.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
What one are you referring to? The 3.1.11 version in the OP or the .25 version I posted in the thread to test?
The op version, I just swapped over from another ROM and wasn't aware of the new version. but I'd be happy to give the test version a shot.
I'll run it for a few days and report back.
Sent from my Nexus 7 using xda app-developers app
Sorry I realize its been way more than a few days.
I hot caught up on a work project that has been eating my life.
Anyways here is what I have to Freeport (hopefully its of some use to you this far out)
Pros:
1. Very fast and smooth, compared to what I was on prior (hellybean) this Rom is a huge jump up in speed.
2. Battery actually lasts all day for me. This is my work phone so that's not bad at all.
3. Bluetooth tethering works really well.
4. All around this is the best Rom I've been on in quite some time.
Cons:
1. Random reboots, though it never happens when I'm doing anything, only when the phone is sitting there on the home screen. So it really hasn't actually bothered me even though it would normally be a huge issue.
2. (I think this is actually a miui feature so it may not be worth worrying about) the data automatically turns off when you reboot. This wouldn't be an issue except for the random reboots mentioned above. Sometimes this happens in my pocket and I don't notice my data is off until I look at it again.

Xperia X8 wi-fi not working(JB Mini Project)

Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:
so noone knows nothing in here?thats sweet
SrSGr said:
so noone knows nothing in here?thats sweet
Click to expand...
Click to collapse
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.
use back stock ROM (just kidding
CKKnot said:
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.
Click to expand...
Click to collapse
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With a few words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!
SrSGr said:
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With little words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!
Click to expand...
Click to collapse
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory
CKKnot said:
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory
Click to expand...
Click to collapse
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!
SrSGr said:
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!
Click to expand...
Click to collapse
Replied. It because I forgot to mention that 06 has a little bit changes that will make normal jb rom that is not released pior to the kernel release data will not boot
SrSGr said:
Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:
Click to expand...
Click to collapse
hey i had same problem with jbmp when i used jbmp kernel but when i flashed with nAa jb 05 kernel it worked fine..

[Q] Slow playstore after installing SlimBean rom

Hello fellow S4A owners,
Today I installed the SlimBean rom from spegelius (thank you!) found here : http://forum.xda-developers.com/showthread.php?t=2640732
Although it was the first time I flashed a rom on my phone, I followed every steps carefully and everything worked fine.
I only have an issue with the playstore : apps download on 3G is really really slow, like 10 kB/s.. while on wifi it seems normal.
I performed a few speed tests on 3G and I hit 1800kB/S on ookla's speedtest app, and everything else seems normal. only the playstore seems to be affected.
I did the "playstore update" when prompted (on wifi) but no change. (I don't really know what that did though..)
anyone has an idea ?
please keep in mind that I'm relatively new to this kind of stuff so don't get too angry if I'm asking the wrong questions please
Thank you
mazuno
ps: I'm not posting on the rom's thread since I am not allowed yet.
ps2 : European i9295 S4A phone
mazuno said:
Hello fellow S4A owners,
Today I installed the SlimBean rom from spegelius (thank you!) found here : http://forum.xda-developers.com/showthread.php?t=2640732
Although it was the first time I flashed a rom on my phone, I followed every steps carefully and everything worked fine.
I only have an issue with the playstore : apps download on 3G is really really slow, like 10 kB/s.. while on wifi it seems normal.
I performed a few speed tests on 3G and I hit 1800kB/S on ookla's speedtest app, and everything else seems normal. only the playstore seems to be affected.
I did the "playstore update" when prompted (on wifi) but no change. (I don't really know what that did though..)
anyone has an idea ?
please keep in mind that I'm relatively new to this kind of stuff so don't get too angry if I'm asking the wrong questions please
Thank you
mazuno
ps: I'm not posting on the rom's thread since I am not allowed yet.
ps2 : European i9295 S4A phone
Click to expand...
Click to collapse
Which gapps package did you install? the Slim_AIO_gapps.4.3.build.2.zip or gapps-jb-20130813-signed.zip from Goo.im/gapps?
vanyel said:
Which gapps package did you install? the Slim_AIO_gapps.4.3.build.2.zip or gapps-jb-20130813-signed.zip from Goo.im/gapps?
Click to expand...
Click to collapse
Hello,
I installed Slim_AIO_gapps.4.3.build.2.zip
mazuno said:
Hello,
I installed Slim_AIO_gapps.4.3.build.2.zip
Click to expand...
Click to collapse
Hmm.. Don't think it's related to the custom ROms and gapps.
Can you check your baseband Version? Mine is currently at UBMK3 ... No problems so far with download speeds. You might also want to consider that mobile data isn't exactly as fast as Wifi which is tied to a DSL or broadband line.
vanyel said:
Hmm.. Don't think it's related to the custom ROms and gapps.
Can you check your baseband Version? Mine is currently at UBMK3 ... No problems so far with download speeds. You might also want to consider that mobile data isn't exactly as fast as Wifi which is tied to a DSL or broadband line.
Click to expand...
Click to collapse
Hi, my baseband version is I9295XXUBMK2 (what does that mean and what's the difference with yours beeing UBMK3 ?)
I had no problem either in wifi or data before installing the custom rom
AND except for google playstore my data speed is correct everywhere (youtube videos, webbrowsing, pron (lol jk) )
seems like it's related to google playstore but how?
Not too sure of the reason now...
Can you try using the generic gapps from goo.im/gapps ?
https://support.google.com/googleplay/answer/1067233?hl=en
Currently I'm running spegelius' CM port together with the generic gapps with no problems at all...
if you have hangouts installed, pls logout of it then check if playstore is more responsive.
vanyel said:
if you have hangouts installed, pls logout of it then check if playstore is more responsive.
Click to expand...
Click to collapse
nope, it did not fix the issue.
If I install the generic gapps now, will it erase some of my settings I did? because now I spend a lot of time customizing my phone since I installed the new rom, and I dont want to do it all over again ^^
mazuno said:
nope, it did not fix the issue.
If I install the generic gapps now, will it erase some of my settings I did? because now I spend a lot of time customizing my phone since I installed the new rom, and I dont want to do it all over again ^^
Click to expand...
Click to collapse
Not really too sure about what's the exact problem... if customizing your phone means that you have installed a lot of apps already, get Helium or Titanium Backup to backup all your apps. before reinstalling the generic gapps just in case.
I have already switched to using the CM 10.2 unofficial version by Spegelius and installed the generic gapps. Everything's fine so far.

[Q&A] [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]

Q&A for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
saeed_sofi said:
can this rom be installed on gt-s5570i?
Click to expand...
Click to collapse
hello is there made any kitkat firmware for galaxy mini without any bugs I mean is there any firmware for daily use?
Any way to back to stock rom by CMW?
Or another solution? I have problem with video codecs, every video player crash.
my android version 4.1.1. how to update into 4.4.4? i have been try to update trough recovery mode, install zip from sdcard, but its failed. i can't update cwm too,,, helpme please,,,,
Few CM 11 questions
Hello, I've used my Galaxy Mini for more than 4 years, but I hadn't known, that it could run also another OS than the default one pre-installed by Samsung. But suddenly, I've found CM and this forum about it. I've made some research, but because I'm beginner with CM, I have few questions:
1. In the description on the thread for the CM 11 for Galaxy Mini there is written, that the development is currently in the testing/alpha2 state. There is also a wishlist of missing features. But the there is also written, that the last update was in January, 2014. If I compare it to Androidarmv6 download archive and its GitHub repository, is seems there already are newer versions out. My first question is, if the most recent version of CM 11 for Galaxy Mini is more stable than that 1 year old alpha2 release? Which missing features from that wishlist have been already resolved?
2. And if the CM 11 version is not stable enough for everyday use, which older (but still based on Android 4.x) and more stable CM version would you recommend me to use instead (if any - otherwise I'll install official CM 7.2)?
3. I noticed, that there is already the official alpha release of CM 12 (based on Android 5.x) and also ported as a new branch on GitHub. I also know, that Android 5.x is really hardware-demanding. Will it be still possible to run CM 12 on Galaxy Mini phone? And what about CM 11 or 10? Could you recommend me the most stable and the newest one (see 2nd question), but still working on so low-performance device as Galaxy Mini in default is (384 MB RAM, 600 MHz, ...)? And if not, could you recommend me some web article describing how to make the performance of my phone better in order to run that recommended CM version from my previous two questions (if it is possible somehow)?
4. And finally, I want to ask, if I need to root my device before installation of that recommended CM version. Because in the installation manual from the original Samsung firmware to the official CM 7.2 there is no need to root Galaxy Mini during process and in the installation manual from CM 7.2 to CM 11 too. But in the installation manual from the original Samsung firmware directly to the CM 11 there is rooted phone needed. I don't understand, why I don't need rooted phone for indirect installation, but for direct installation I do. Could you clarify me the installation process?
I hope somebody experienced helps the beginner there (but good programmer and advanced Linux user) with the installation of CM by answering these a little bit complicated questions
aleskva said:
Hello, I've used my Galaxy Mini for more than 4 years, but I hadn't known, that it could run also another OS than the default one pre-installed by Samsung. But suddenly, I've found CM and this forum about it. I've made some research, but because I'm beginner with CM, I have few questions:
1. In the description on the thread for the CM 11 for Galaxy Mini there is written, that the development is currently in the testing/alpha2 state. There is also a wishlist of missing features. But the there is also written, that the last update was in January, 2014. If I compare it to Androidarmv6 download archive and its GitHub repository, is seems there already are newer versions out. My first question is, if the most recent version of CM 11 for Galaxy Mini is more stable than that 1 year old alpha2 release? Which missing features from that wishlist have been already resolved?
2. And if the CM 11 version is not stable enough for everyday use, which older (but still based on Android 4.x) and more stable CM version would you recommend me to use instead (if any - otherwise I'll install official CM 7.2)?
3. I noticed, that there is already the official alpha release of CM 12 (based on Android 5.x) and also ported as a new branch on GitHub. I also know, that Android 5.x is really hardware-demanding. Will it be still possible to run CM 12 on Galaxy Mini phone? And what about CM 11 or 10? Could you recommend me the most stable and the newest one (see 2nd question), but still working on so low-performance device as Galaxy Mini in default is (384 MB RAM, 600 MHz, ...)? And if not, could you recommend me some web article describing how to make the performance of my phone better in order to run that recommended CM version from my previous two questions (if it is possible somehow)?
4. And finally, I want to ask, if I need to root my device before installation of that recommended CM version. Because in the installation manual from the original Samsung firmware to the official CM 7.2 there is no need to root Galaxy Mini during process and in the installation manual from CM 7.2 to CM 11 too. But in the installation manual from the original Samsung firmware directly to the CM 11 there is rooted phone needed. I don't understand, why I don't need rooted phone for indirect installation, but for direct installation I do. Could you clarify me the installation process?
I hope somebody experienced helps the beginner there (but good programmer and advanced Linux user) with the installation of CM by answering these a little bit complicated questions
Click to expand...
Click to collapse
Are you sure your device is galaxy mini/pop s5570? There is no "i" at end? If both yes, then go ahead and read my answers.
Answers:
1. The op(member of androidarmv6 group) isn't active. Thats why the thread says alpha. But you can download and install latest tass(galaxy mini) version from androidarmv6 jenkins. And about feature list, everything is fixed from that list, but camera is colorless(black and white type pics). You need tls enabled recovery to flash latest cm11.
2. Cm11 is stable enough for daily usage. But cm11 is resource hungry. I would recommend you to try cm11 and make your own decision about it. Every android version <= 4.2.2 are fully stable and everything works. I use aokp 4.1.2 myself. 4.2.2 is a bit heavy but if you don't use too many apps, you could use it without any problems. Cm9, ics aosp, cm10,slimbean,aokp jb4.1.2 roms are most efficient 4.x roms and less resource hungry. For better results and good performance, you may need to install greenify. See my threads for 4.x roms.
3. Cm12 isn't booting yet. You can follow review.androidarmv6.org for latest changes and progress. Better use aokp 4.1.2 or slimbean or cm10 with greenify and int2ext(to expand internal memory, you need to create 512mb ext4 partition on sdcard).
4. It is not that hard to flash a simple zip. There is a thread here in galaxy mini section which describes how to root galaxy mini. Follow that tutorial. Then flash cwm 5.0.2.8 recovery(search in and download from galaxy mini section) it from stock rom recovery.
Then you are ready to install any galaxy mini roms.
Caution: Don't flash any zips outside galaxy mini section. Our device board name is "tass". So, you'll see tass in filenames and they are for galaxy mini/pop s5570. If you flash wrong zips, you'll end up with bricked phones(a paper weight). So, be careful. Have a happy flashing.
Sent from my GT-S5570 using XDA Free mobile app
Thank you! And one more question below
Venkatesh said:
Are you sure your device is galaxy mini/pop s5570? There is no "i" at end? If both yes, then go ahead and read my answers.
Caution: Don't flash any zips outside galaxy mini section. Our device board name is "tass". So, you'll see tass in filenames and they are for galaxy mini/pop s5570. If you flash wrong zips, you'll end up with bricked phones(a paper weight). So, be careful.
Click to expand...
Click to collapse
Sure! Just S5570 without "i" and just Tass! I know it is older mobile phone, but still I don't want little unusable brick
Venkatesh said:
But you can download and install latest tass(galaxy mini) version from androidarmv6 jenkins. And about feature list, everything is fixed from that list, but camera is colorless(black and white type pics). You need tls enabled recovery to flash latest cm11.
Click to expand...
Click to collapse
Is jenkins the download.androidarmv6.com site? Or jenkins.androidarmv6.com? But on the second site I don't see download link, even if I login with my GitHub account. And what is tls enabled recovery? Does it mean using CWM recovery? Or am I wrong?
Venkatesh said:
I would recommend you to try cm11 and make your own decision about it.
Click to expand...
Click to collapse
I'll try and I'll see
Venkatesh said:
There is a thread here in galaxy mini section which describes how to root galaxy mini. Follow that tutorial.
Click to expand...
Click to collapse
So I need to root my phone before. I wasn't sure, but now I understand clearly.
Venkatesh said:
Have a happy flashing.
Click to expand...
Click to collapse
Thank you for your answers to my questions! Actually many thanks!
And finally one more question:
I've seen more threads about Galaxy Mini roms in this xda section. And in almost all of them is written, that everything works, just there are problems using camera. It looks like this is a global problem. Is this problem only in CM 11 at the moment and group members only aren't active to cross the camera out from the "Don't work" list on threads for roms, which were resolved? Or is it still global problem? In which roms camera fully work without any caveat? You wrote, that everything in Galaxy Mini section <=4.2.2 is fully stable, so I expect it works there, but better to ask...
aleskva said:
Sure! Just S5570 without "i" and just Tass! I know it is older mobile phone, but still I don't want little unusable brick
Is jenkins the download.androidarmv6.com site? Or jenkins.androidarmv6.com? But on the second site I don't see download link, even if I login with my GitHub account. And what is tls enabled recovery? Does it mean using CWM recovery? Or am I wrong?
I'll try and I'll see
So I need to root my phone before. I wasn't sure, but now I understand clearly.
Thank you for your answers to my questions! Actually many thanks!
And finally one more question:
I've seen more threads about Galaxy Mini roms in this xda section. And in almost all of them is written, that everything works, just there are problems using camera. It looks like this is a global problem. Is this problem only in CM 11 at the moment and group members only aren't active to cross the camera out from the "Don't work" list on threads for roms, which were resolved? Or is it still global problem? In which roms camera fully work without any caveat? You wrote, that everything in Galaxy Mini section <=4.2.2 is fully stable, so I expect it works there, but better to ask...
Click to expand...
Click to collapse
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Venkatesh said:
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
Okay, I'll try next week and we'll see
well done
My experiences and impressions
Venkatesh said:
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
I haven't time before, so today I managed to install a new ROM to my Mini six months after I wrote here. First of all I spent hours of googling and searching, where to download working package to root my phone and where to download cwm 5.0.2.8 for Mini, because all of the packages for rooting haven't been working at all and all of the download links to cwm 5.0.2.8 I've found were dead, except the links and except the packages here. Googling and searching finally helped, so I had my first cwm on my Mini. Then I've checked first three ROMs from the Mini's section. Concretely CM 10, SB 3.1.0 and AOKP JB 4.1.2.
First of all I've tried Slimbean. I was really confused, when I found out, that there is no keyboard inside the installation! What the h*** (sorry, but I really said that when at that moment)? One of my reasons to leave original Gingerbread was that really bad keyboard, which I need to reinstall by some from Google Play every time I had to reset my phone into factory settings (another reason to upgrade btw). And after upgrade again? But Slimbean looked really well, just a few strings weren't translated to my language, so I decided to try AOKP. AOKP hadn't just keyboard, but also gapps, so I needed to google, where to download it from. I've found this and hoped it can't break my newly installed ROM. And there were more strings untranslated to my language, so I decided to try the third one, CM. It was fully translated, but also there weren't gapps and keyboard. And the patch (if it was a patch) - tether patches.zip - couldn't be applied (some error was thrown during its installation).
Finally, I've found gapps for it too. The winner of these three was Slimbean, the loser was AOKP, but I'm going to test more ROMs, until I find some good one. In order to avoid searching the Mini's section another hours: Is there any ROM with preinstalled keyboard (and possibly gapps too)?
aleskva said:
I haven't time before, so today I managed to install a new ROM to my Mini six months after I wrote here. First of all I spent hours of googling and searching, where to download working package to root my phone and where to download cwm 5.0.2.8 for Mini, because all of the packages for rooting haven't been working at all and all of the download links to cwm 5.0.2.8 I've found were dead, except the links and except the packages here. Googling and searching finally helped, so I had my first cwm on my Mini. Then I've checked first three ROMs from the Mini's section. Concretely CM 10, SB 3.1.0 and AOKP JB 4.1.2.
First of all I've tried Slimbean. I was really confused, when I found out, that there is no keyboard inside the installation! What the h*** (sorry, but I really said that when at that moment)? One of my reasons to leave original Gingerbread was that really bad keyboard, which I need to reinstall by some from Google Play every time I had to reset my phone into factory settings (another reason to upgrade btw). And after upgrade again? But Slimbean looked really well, just a few strings weren't translated to my language, so I decided to try AOKP. AOKP hadn't just keyboard, but also gapps, so I needed to google, where to download it from. I've found this and hoped it can't break my newly installed ROM. And there were more strings untranslated to my language, so I decided to try the third one, CM. It was fully translated, but also there weren't gapps and keyboard. And the patch (if it was a patch) - tether patches.zip - couldn't be applied (some error was thrown during its installation).
Finally, I've found gapps for it too. The winner of these three was Slimbean, the loser was AOKP, but I'm going to test more ROMs, until I find some good one. In order to avoid searching the Mini's section another hours: Is there any ROM with preinstalled keyboard (and possibly gapps too)?
Click to expand...
Click to collapse
I've removed keyboard and gapps intensionally. I use this keyboard. If you really want jb keyboard i'll provide you later(is not better than gb keyboard though). Yourzgapps are best. Google search yourzgapps.
Venkatesh said:
I've removed keyboard and gapps intensionally. I use this keyboard. If you really want jb keyboard i'll provide you later(is not better than gb keyboard though). Yourzgapps are best. Google search yourzgapps.
Click to expand...
Click to collapse
I used this one. Its dev developed JB keyboard too, but it wasn't compatible with GB anymore. Is there any package for this or JB one or I need to install them from Google Play?
I found out that AOKP just needed to restart to be fully translated, so it is a little bit ok than CM (but SB still wins).
I'd like to try some 4.0 ROMs and some 4.2 ROMs (just to try, like yesterday). I saw here some threads about english only ROMs. I'll try them and maybe find my favourite. Is there any chance to build my language version after that? I know there is big red notification This is english only! (You have been warned...!). I don't want to waste your time for so minor things. Feel free to reject my potential request at the beginning.
aleskva said:
I used this one. Its dev developed JB keyboard too, but it wasn't compatible with GB anymore. Is there any package for this or JB one or I need to install them from Google Play?
I found out that AOKP just needed to restart to be fully translated, so it is a little bit ok than CM (but SB still wins).
I'd like to try some 4.0 ROMs and some 4.2 ROMs (just to try, like yesterday). I saw here some threads about english only ROMs. I'll try them and maybe find my favourite. Is there any chance to build my language version after that? I know there is big red notification This is english only! (You have been warned...!). I don't want to waste your time for so minor things. Feel free to reject my potential request at the beginning.
Click to expand...
Click to collapse
You can add your language translations to apks inside the rom. ics,jb keyboards won't work on gb. There is a cm10.1 version from androidarmv6 team, try it. It has all languages. To build only your language, then you need to sync sources and modify build files to get your language.
Venkatesh said:
You can add your language translations to apks inside the rom. ics,jb keyboards won't work on gb. There is a cm10.1 version from androidarmv6 team, try it. It has all languages. To build only your language, then you need to sync sources and modify build files to get your language.
Click to expand...
Click to collapse
Thank you, I'll search the CM 10.1 from androidarmv6 team and try it. The keyboard looks like ICS, but worked fine in factory firmware GB. I think it could work in this CM 10.1 too. If I install it from Google Play to the CM 10.1 ROM, it will work, or not? But I don't know, how to change the apk into the zip, that can be installed from cwm.
Thank you for your all help. Six months ago I thought it will be so complicated, but it is easy if one follows the rules not to make a bricked phone.
Edit: I tried this and it is totally awesome. The best I've tried. I'll test it for a longer period. My favourite keyboard is inside, first time in my Mini's life I don't have to reinstall that bad original GB keyboard. I just hope it won't be so battery and RAM consuming (I'll test it). I ask here if I have some question or problem in the future. Last time huge thanks (in words and in thank buttons too)
aleskva said:
Thank you, I'll search the CM 10.1 from androidarmv6 team and try it. The keyboard looks like ICS, but worked fine in factory firmware GB. I think it could work in this CM 10.1 too. If I install it from Google Play to the CM 10.1 ROM, it will work, or not? But I don't know, how to change the apk into the zip, that can be installed from cwm.
Thank you for your all help. Six months ago I thought it will be so complicated, but it is easy if one follows the rules not to make a bricked phone.
Edit: I tried this and it is totally awesome. The best I've tried. I'll test it for a longer period. My favourite keyboard is inside, first time in my Mini's life I don't have to reinstall that bad original GB keyboard. I just hope it won't be so battery and RAM consuming (I'll test it). I ask here if I have some question or problem in the future. Last time huge thanks (in words and in thank buttons too)
Click to expand...
Click to collapse
try cm10.1 rom from here.
Venkatesh said:
try cm10.1 rom from here.
Click to expand...
Click to collapse
I tried it, the performance is better, but there is a huge problem. I install it in this way:
boot into cwm 5.0.2.8 >
wipe data, cache, dalvik cache, battery stats >
flash cm10.1 you suggested >
flash yourzgapps >
flash int2ext >
fotmat sd-ext >
reboot
After reboot cm10.1 boots and at the beginning works like a charm. Int2ext works as expected, 1/5 from memory used. But after 2-3 minutes int2ext stops working and I have full memory. Reboot or int2ext reinstallation don't work. Why? How could I fix it?
aleskva said:
I tried it, the performance is better, but there is a huge problem. I install it in this way:
boot into cwm 5.0.2.8 >
wipe data, cache, dalvik cache, battery stats >
flash cm10.1 you suggested >
flash yourzgapps >
flash int2ext >
fotmat sd-ext >
reboot
After reboot cm10.1 boots and at the beginning works like a charm. Int2ext works as expected, 1/5 from memory used. But after 2-3 minutes int2ext stops working and I have full memory. Reboot or int2ext reinstallation don't work. Why? How could I fix it?
Click to expand...
Click to collapse
Don't format sd-ext after flashing int2ext. One factory reset is enough.
Try this way:
1. Goto recovery and make factory reset/wipe.
2. Flash rom and reboot system(let it boot first).
3. Again goto recovery, mount all partitions and flash int2ext.
4. You can also flash gapps now. Reboot system now, and start your setup.
Venkatesh said:
Don't format sd-ext after flashing int2ext. One factory reset is enough.
Try this way:
1. Goto recovery and make factory reset/wipe.
2. Flash rom and reboot system(let it boot first).
3. Again goto recovery, mount all partitions and flash int2ext.
4. You can also flash gapps now. Reboot system now, and start your setup.
Click to expand...
Click to collapse
I had formatted sd-ext, because it is written in int2ext installation steps. Finally I tried your suggestion and everything works. I just flashed gapps right after flashing OS, because I want Google's first boot guide. I'm so happy everything works like a charm on that older, but good Mini. I'm also happy I got rid of that buggy GB. Once more thanks.
Err

Is there a custom ROM for the P880 WITHOUT a LOT of problems?

I try ROMs and ROMs and ROMs and all are unusable, because the
phone freezes with nameless-5.1.1-20151107-p880-nightly or
reboots when starting apps with euphoria-os-1.1-p880-unofficial-20160208-user or
is extremely slow and is stottering with aosplp-20151122-p880
a..s.o
The apps which lead to a reboot with euphoria work fine with aosp and nameless. Euphoria is fast, faster than nameless, which would be fast enough for me. There are no problems which exist with every ROM.
Does anyone have a recommendation for a ROM for the P880 which works without big problems. At the moment I think about to go back to 4.4 and try beanstalk-4.4.4010-20140904-p880cm
Of course I would be happy to find a ROM with fixed stagefright-bugs, but it looks like to be impossible
lg-optimus said:
Of course I would be happy to find a ROM with fixed stagefright-bugs, but it looks like to be impossible
Click to expand...
Click to collapse
Check out http://forum.xda-developers.com/showpost.php?p=66049970&postcount=1195
This is the latest 5.1.1 ROM with security patch level at 2016-04-01. It has all known stagefright bugs fixed so far.
If you wish to report issues on the ROM I shared, then use the thread over there, not here.
MoltenMotherBoard is the last custom ROM that I miss to test. I'm going to try it in the next days.
According to my test, my answer to the thread question is: NO, there's no custom rom working fine for my daily use.
Actually fastest rom was liquid smooth 4.4.4. Our phone hardware outdated. Like the others said this phone is crap
I'm running Euphoria version 1.0-p880-20150130 (Android 5.0.2), it's the best Lollipop based custom ROM for our device in my opinion. Unlike AOSP it has more settings (& features), and it's more stable than later versions of Euphoria. If you want to stick to KitKat, check out the latest CM nightlies.
To be honest, after 2 years of testing custom ROM... today i finally found the best one to keep... STOCK!!!
I've re-discovered the pleasure of see who is calling me at once, not after 20 seconds. I can finally take photos, hear who is calling, open apps without having to wait like 20-30 seconds.
I appreciate the effort of every developer... but at the end, the result is that out of 20-30 custom ROMs for our phone... no one can be used for daily use and being happy with it
bs360 said:
To be honest, after 2 years of testing custom ROM... today i finally found the best one to keep... STOCK!!!
I've re-discovered the pleasure of see who is calling me at once, not after 20 seconds. I can finally take photos, hear who is calling, open apps without having to wait like 20-30 seconds.
I appreciate the effort of every developer... but at the end, the result is that out of 20-30 custom ROMs for our phone... no one can be used for daily use and being happy with it
Click to expand...
Click to collapse
having JellyBean running on your device in 2016 is a very very very bad idea.
Here's the issues I found with LG stock JB-4.1.2 ROM v20 euro-open. If you can live with them, then good for you.
- Bluetooth button action broken. Cannot invoke Google Search or Voice Dialer from bluetooth headsets. Fixed in custom ROM such as CM/AOSP KK and LP.
- No update for Google Maps. Version 7 is the final version for v20c. Fixed in CM/AOSP KK/LP.
- No notification from Lock Screen. Fixed in CM/AOSP LP.
- No smart lock to avoid the hassle of entering PINs for known location and known BT device. Fixed in CM/AOSP LP.
- No screen cast. Fixed in AOSP LP.
- No bluetooth tethering. Fixed in AOSP LP.
Actually I'm on stock now (euro 20c), and my version of Maps is 9.25.1.
But yes, you're right...I'm ok because for instance I don't use bluetooth at all.
I still miss to test "AOSP Lollipop 5.1.1 | MoltenMotherBoard"...but my question is: is smooth as the stock? Are these working ? camera, flash, barcode, dialer reader, calls in general..
thanks in advance
bs360 said:
Actually I'm on stock now (euro 20c), and my version of Maps is 9.25.1.
"AOSP Lollipop 5.1.1 | MoltenMotherBoard"...but my question is: is smooth as the stock?
Click to expand...
Click to collapse
When I was still on LG stock JB, Maps somehow got updated. But then the device slowed to crawl and I factory reset it and I didn't get Google Play store to update it again. Glad you have it and it works for you.
Barcode and FM radio are not working. If these 2 are important to you, then you should stick with LG stock.
For UI smoothness, I think Lollipop itself has made tons of improvement that it is at least the same or better than JB. Don't take my words for it, you should try it out yourself and pass on the judgement.
I reinstall again LS KK 4.4.4 and updated to latest Mourta's kernel from modaco forum. Phone back to alive.
asgz said:
I reinstall again LS KK 4.4.4 and updated to latest Mourta's kernel from modaco forum. Phone back to alive.
Click to expand...
Click to collapse
please link?
LS 3,2 4.4.4 and mourta's kernel inside of the file. I installed rom and open gapps after a few days wiped cache and updated kernel.
here is the link : http://s4.dosya.tc/server/uqoebl/LS_KK_4.4.4.rar.html
asgz said:
LS 3,2 4.4.4 and mourta's kernel inside of the file. I installed rom and open gapps after a few days wiped cache and updated kernel.
here is the link : http://s4.dosya.tc/server/uqoebl/LS_KK_4.4.4.rar.html
Click to expand...
Click to collapse
i just get an loop bot, i can't install a kernel..

Categories

Resources