Related
IF YOU DON'T HAVE PARTITION, JUST FOLLOW THIS [this guide apply to all Rom that are supported cache to ext]
If you already have partition, just factory reset and reinstall rom and you'll have 165mb.
165mb left in a rom is a quite much. After i installled 100++ apps+games, it still has 130mb left. (None of the apps is moved to the SD)
How to get weather animation working on wildfire?
My Q&A Section for Wildpuzzle ROM
My Wildfire
How to create your own boot animation
*PLEASE FULLY READ THIS BEFORE TAKING ACTION*
*I AM NOT RESPONSIBLE FOR YOUR DATA AND PHONE! I'm just try my best to help you.*
OMG? too long's post? then go 2nd post which is shorter
Sounds impossible? But it is possible!
Wondering how??? Lets start.
What you must have
Hardware: Rooted HTC Wildfire, Micro SD Card, Card reader
1st, You need a wildpuzzle rom 2.2.1 (V0.6 gives 165mb, v0.7 160mb, v0.8 102mb[without cache move to ext]) Wildpuzzle rom 2.2.1 download page
2nd, Make sure that you BACKUP your SD card (copy whole SD card to computer).
3rd, Move wildpuzzle rom 2.2.1 that you have already downloaded to the SD card (DONT delete the copy in computer).
4th, You need to WIPE ALL THE DATA (wipe/factory reset) in your wildfire and make sure that you have already made a backup of your rom before wiping.
5th, Make sure that you backup your SD card with your BACKUP (backup-ed rom).
6th, Run in recovery mode and select wipe/factory reset the data.
7th, Choose install zip from SD and install your wildpuzzle rom 2.2.1.
8th, After your rom has successfully copied to the system (phone), reboot your phone and wait for a few minutes. (it may take up to 10minutes)
9th, Now simply set up your data (you may ignore them, you don't need it).
10th, Go in to the rom manager, and choose partition SD. Default is ok. (I use 512mb, swap 0mb)
11th, Now your SD card will be wiped and will be partitioned.
12th, Now shut down your phone (take the battery out).
13th, Take out your SD card and copy your wildpuzzle rom 2.2.1 to SD once again (make sure your phone is FULLY OFF).
14th, Now select system wipe (wipe/factory reset). [Dont worry about the partition, it won't format SD card]
15th, Install the wildpuzzle rom 2.2.1 once again and wait for a few minutes.
16th, After successfully installed, you can set up your personal info. Now go to menu > setting > sd and phone storage > and you will see 160mb++ left.
17th, Now you can ignore the move to SD, you can leave all the apps in phone but after you have fully installed your apps, try to reboot. It will takes UP TO 10 MINUTES to move the apps to ext [It will take quite a long time, dont worry].
[P.S. It DOESN'T move the apps to sd, your apps still in phone, it only move 9/10 of the file size (MB) to ext and reduce the size in phone. So you have more available space in phone.]
18th, You're done!
Please go menu > setting > SD & Phone storage > and check available space.
IF IT IS LESS THAN 160MB, THERE IS PROBLEMS, please try again
*PLEASE CONTINUE READING*
***Something that you cant do***
1st, Mount as disk drive in USB is working.
[If you hate taking the SD out, here is the solution. Use Dropbox, a apps that you can download in your phone and computer. You can upload files to dropbox and download in phone. So nothing to worry about mp3.. files.. and games..]
2nd, DON'T simply take out the SD card without FULLY shut down the phone.
3rd, DON'T press unmount SD. Your phone will not working and hang.
If you need to move apps from computer to SD, FULLY shut down the phone and take out your SD and use a card reader.
What if partition not working? Showed >> [a Triangle with a Exclamation point]
1st, try take out your battery and try reboot and partition it again.
2nd, if it is still not working after several tries, try to go market and download the ROM Manager in market.
After partition, your files still in SD card?
1st, try go partition again.
2nd, your phone isn't root yet.
3rd, try another SD card.
When you want to connect your SD card by using Card Reader, it shows "You have to format before using it"
1st, try to get a new Card Reader.
2nd, try another SD card.
I need to change the size of my ext, How??
1st, backup your phone
2nd, copy SD to PC
3rd, go menu > setting > sd and phone storage > unmount SD > format sd
4th, create partition
5th, copy SD from PC
6th, go recovery, restore your phone
7th, all ext and files will restore to ext.
8th, restart and done.
I want cache move to ext. what should i do??
Use this code to move cache to ext.
You may install 0.6 rom then install 0.8 rom without wiping the old rom. And ext partition still working.
if not, you need to use this.
Code:
a2sd cachesd (move dalvik to sd card)
a2sd cachesdreset (move dalvik to sd card and clears contents of dalvik-cache)
a2sd cachepart (move dalvik to cache partition)
a2sd cachepartreset (move dalvik to cache partition and clears contents of dalvik-cache)
I want the apps that have in Wildpuzzle rom 0.6, and 0.8 doesn't have it. How???
Dont worry, you can create your own update zip or apps and install it by visiting How to create your own zip?
Thanks,
From Melvinchng
Wildpuzzle Rom 2.2.1 FANS...
HTC Wildfire @ 710mhz/768mhz
16GB Class 4 Kingston SD card
with 165mb phone momory.
Special Thanks to danne_jo, daddyspud and others that link my page.
Melvinchng @ Facebook You can post on my wall to ask me question, I'll reply u ASAP.
Melvinchng @ Twitter
Melvinchng @ Plurk
Gmail: [email protected] (I'll reply ASAP and please leave your name and problems.) [new mail]
Please check the thread before asking questions.
Please press THANKS button if you feel it is useful and it can make me happy!
Please make a donation too. Thanks!
Fast and short guide
Too short? too blur? what should i do now? then go back to first post
*PLEASE FULLY READ THIS BEFORE TAKING ACTION*
*I AM NOT RESPONSIBLE FOR YOUR DATA AND PHONE! I'm just try my best to help you*
1. backup (nandroid/on the fly backup [available in market which is backup all apps as apk file in sd])
2. backup SD to PC
3. copy ROM to SD
4. wipe/factory reset
5. install ROM from SD
6. reboot and start wildpuzzle
7. go rom manager
8. partition SD (ext3 512mb, swap 0/32mb)
9. wipe/factory reset
10. copy ROM to SD again
12. install ROM again
13. start system
14. install all apps
15. reboot + done
Please go menu > setting > SD & Phone storage > and check available space.
IF IT IS LESS THAN 160MB, THERE IS PROBLEMS, please try again
[P.S. It DOESN'T move the apps to sd, your apps still in phone, it only move 9/10 of the file size (MB) to ext and reduce the size in phone. So you have more available space in phone.]
Thanks for grognaz suggestion.
*PLEASE CONTINUE READING*
***Something that you cant do***
1st, Mount as disk drive in USB is working.
[If you hate taking the SD out, here is the solution. Use Dropbox, a apps that you can download in your phone and computer. You can upload files to dropbox and download in phone. So nothing to worry about mp3.. files.. and games..]
2nd, DON'T simply take out the SD card without FULLY shut down the phone.
3rd, DON'T press unmount SD. Your phone will not working and hang.
If you need to move apps from computer to SD, FULLY shut down the phone and take out your SD and use a card reader.
What if partition not working? Showed >> [a Triangle with a Exclamation point]
1st, try take out your battery and try reboot and partition it again.
2nd, if it is still not working after several tries, try to go market and download the ROM Manager in market.
After partition, your files still in SD card?
1st, try go partition again.
2nd, your phone isn't root yet.
3rd, try another SD card.
When you want to connect your SD card by using Card Reader, it shows "You have to format before using it"
1st, try to get a new Card Reader.
2nd, try another SD card.
I need to change the size of my ext, How??
1st, backup your phone
2nd, copy SD to PC
3rd, go menu > setting > sd and phone storage > unmount SD > format sd
4th, create partition
5th, copy SD from PC
6th, go recovery, restore your phone
7th, all ext and files will restore to ext.
8th, restart and done.
Some extra information
So some of you guys think that OMG, why there is no use trackpad to wake? zzz... I want it.. but how??
Then, here is the solution.
Now go to Wildpuzzle rom 2.2 V8.0.11 page to download select trackpad to wake up and download it. Go recovery and install from SD. So there is no more problem anymore. XD
I want cache move to ext. what should i do??
Use this code to move cache to ext.
You may install 0.6 rom then install 0.8 rom without wiping the old rom. And ext partition still working.
if not, you need to use this.
You must have a2sd script install and type these code in terminal emulator.
Type su, it will have the superuser permission and type these code in depends on what you want to move.
Code:
a2sd cachesd (move dalvik to sd card)
a2sd cachesdreset (move dalvik to sd card and clears contents of dalvik-cache)
a2sd cachepart (move dalvik to cache partition)
a2sd cachepartreset (move dalvik to cache partition and clears contents of dalvik-cache)
I want the apps that have in Wildpuzzle rom 0.6, and 0.8 doesn't have it. How???
Dont worry, you can create your own update zip or apps and install it by visiting How to create your own zip?
Thanks,
From Melvinchng
Wildpuzzle Rom 2.2.1 FANS...
HTC Wildfire @ 710mhz/768mhz
16GB Class 4 Kingston SD card
with 165mb phone momory.
Special Thanks to danne_jo, daddyspud and others that link my page.
Melvinchng @ Facebook You can post on my wall to ask me question, I'll reply u ASAP.
Melvinchng @ Twitter
Melvinchng @ Plurk
Gmail: [email protected] (I'll reply ASAP and please leave your name and problems.) [new mail]
Please check the thread before asking questions.
Please press THANKS button if you feel it is useful and it can make me happy!
Please make a donation too. Thanks!
i was wondering for so long how come people have this much of free space in their wildfire, but not any more... thanks to your guide, i also have it.
regards;
the most instersting fact is you dont need to move apps to sd and u still have loads of space... i ended up with sitting in front of computer for two hours to get this work
Nice tutorial. Great work.
Sent from my HTC Wildfire using XDA App
kenchi27 said:
Nice tutorial. Great work.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
thank you!
Hi melvinchng :
You did a great job.
But i have a little suggestion.
Since the rom mnnager only 3 options (128M 256M 512M),if i want to partition at difference size, it cannot be done at RM.
So partition SD card before install the ROM, (use Gparted or others,1 for fat32,1 for ext2 or ext3 ),then it can shorten the steps,
just install ROM once.
Thanks.
The reason for more space is because dalvik cache has been moved to sd
Sent from my HTC Wildfire using Tapatalk
ww231 said:
Hi melvinchng :
You did a great job.
But i have a little suggestion.
Since the rom mnnager only 3 options (128M 256M 512M),if i want to partition at difference size, it cannot be done at RM.
So partition SD card before install the ROM, (use Gparted or others,1 for fat32,1 for ext2 or ext3 ),then it can shorten the steps,
just install ROM once.
Thanks.
Click to expand...
Click to collapse
thanks for your information, but for newbies they dont understand much.. haha! thanks
ww231 said:
Hi melvinchng :
Since the rom mnnager only 3 options (128M 256M 512M),if i want to partition at difference size, it cannot be done at RM.
Thanks.
Click to expand...
Click to collapse
You can make and delete partitions directly on ADB SHELL using fdisk.
Code:
fdisk /dev/block/mmcblk0
and next type m to show what you can do here.
dikamilo said:
You can make and delete partitions directly on ADB SHELL using fdisk.
Code:
fdisk /dev/block/mmcblk0
and next type m to show what you can do here.
Click to expand...
Click to collapse
Can we select custom size?
melvinchng said:
Can we select custom size?
Click to expand...
Click to collapse
Yes, you can do what you want, but there is more complicated because you don't use MB, but cylinders.
There is small tutorial chow use fdisk if you want: http://tldp.org/HOWTO/Partition/fdisk_partitioning.html
I only have 98,56 MB free (
hi really good tutorial but i got a prob i followed this step bye step but it nt worked properlly think i only got a 101 mb left and when i install apps they install on phone memory any advice welcome:d
or shud i just do dtapp2sd?????
I have found the stability of the system gets compromised when important apps like home start running off the sdcard. The sdcard deteriorates with usage faster than internal memory. So overall, be careful of running everything off sdcard. Nice to see free space but not at cost of stability.
melvinchng said:
*PLEASE CONTINUE READING*
***Something that you cant do***
1st, You SHOULDN'T choose mount as disk drive in USB. (your phone will be malfunction and hang. And you need to reinstall rom)
2nd, DON'T simply take out the SD card without FULLY shut down the phone.
Click to expand...
Click to collapse
the second point, I can understand, but the first one..... I`m truly dissapointed. So I should rape my sd card slot every time just to copy a few photos to a computer. (and yes, I know that there are several ways to copy data from the phone to aa pc and backwards, other than the cable.
Damn.
what if I've already partitioned my sd card and when I install apps it goes to phone memory by default @[email protected]
dikamilo said:
You can make and delete partitions directly on ADB SHELL using fdisk.
Code:
fdisk /dev/block/mmcblk0
and next type m to show what you can do here.
Click to expand...
Click to collapse
Hi dikamilo
Thank your value informations.
I use the "Gparted live USB" that free and with a GUI interface,
more easy to rookie who like me.
daddyspud said:
hi really good tutorial but i got a prob i followed this step bye step but it nt worked properlly think i only got a 101 mb left and when i install apps they install on phone memory any advice welcome:d
or shud i just do dtapp2sd?????
Click to expand...
Click to collapse
No difference, if u move to sd, after reboot, u need to wait for SD card to prepare the apps. If u put in phone memory, the apps is in the phone once u reboot. u save a lot of time on waiting apps from sd
Alex_GP said:
the second point, I can understand, but the first one..... I`m truly dissapointed. So I should rape my sd card slot every time just to copy a few photos to a computer. (and yes, I know that there are several ways to copy data from the phone to aa pc and backwards, other than the cable.
Damn.
Click to expand...
Click to collapse
I tried it before, mount as SD, and whole phone not working. after reboot, only 98mg left
Hy everybody,
My question is at the bottom
Internal memory is not enough on galaxy ACE ? sd card can be partitioned and used with "llink2sd" as internal memory.
I did :
- Using MiniTool Partition Wizard Home Edition I partitioned SD card to two primary fat32 partitions.
- I rebooted my phone with sd card in it
- EXPECTED it to be mounted correctly, to run Link2SD to format second partition to ext3 or keep it fat32 or wathever.
BUT :
Android says that sd card is damaged
Reasons :
- Android expects one partition formatted in FAT32 with no MBR (?) in the begining of the memory :silly:
Solution :
- Partition memory with a tool that can tell Android how to read MBR or how to deal with multi partition sd card. tools like Rom manager.
My question is, is there another way to tell Android how to deal with my sd card ? without changing the rom ? using for example terminal emulator ? or can you please explain to me how I can use Rom manager to partition ? cause I didn't succeed with it.
and pleeease I'm just fed up with answers like :
"but why do you need to partition ?"
"why don't u just use app2sd ?"
"why don't you get a girlfriend instead of spending all your time on a phone that you hate ?"
NB : I updated my phone manually to 2.3.6 then rooted it. I don't want to use custom roms EXCEPT if you give me a hint about the best roms arround
Thank you in advance
I used cwm to partition my sd card and it works fine
Sent from my GT-S5830 using xda app-developers app
1. you can re-partition your sd card to one partition (FAT, I think) by partitioning software
2. boot Clockworkmod recovery (Home + Power)
3. Advanced > partitioning sd card
4. Choose how much you want
5.done
6.Finally I suggest you install PSN Memory Mod
2.3-http://forum.xda-developers.com/showthread.php?t=1960652
4.x-http://forum.xda-developers.com/showthread.php?t=1959779
KelvinCheong said:
1. you can re-partition your sd card to one partition (FAT, I think) by partitioning software
2. boot Clockworkmod recovery (Home + Power)
3. Advanced > partitioning sd card
4. Choose how much you want
5.done
6.Finally I suggest you install PSN Memory Mod
2.3-http://forum.xda-developers.com/showthread.php?t=1960652
4.x-http://forum.xda-developers.com/showthread.php?t=1959779
Click to expand...
Click to collapse
hi just want to ask, after we follow this instruction and flash PSN mem mod are we going to install LINK2SD? or the psn will automatiicaly take the apks to the internal mem after installation?
mizukage said:
hi just want to ask, after we follow this instruction and flash PSN mem mod are we going to install LINK2SD? or the psn will automatiicaly take the apks to the internal mem after installation?
Click to expand...
Click to collapse
No you only need to install PSN.
It is a DATA2EXT SCRIPT. I am happy with it.
I prefer SD-EXT > 1GB, its enough, and you need a Class 6 sdcard
KelvinCheong said:
No you only need to install PSN.
It is a DATA2EXT SCRIPT. I am happy with it.
I prefer SD-EXT > 1GB, its enough, and you need a Class 6 sdcard
Click to expand...
Click to collapse
is this applicable to all ROMS?since PSN is just only memory swap..right?
mizukage said:
is this applicable to all ROMS?since PSN is just only memory swap..right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1960652 <<<<<<<<<Support all based on CM7.2
Version for ics/jb I tried in PAC Rom but didnt work
so what version is yours?
KelvinCheong said:
http://forum.xda-developers.com/showthread.php?t=1960652 <<<<<<<<<Support all based on CM7.2
Version for ics/jb I tried in PAC Rom but didnt work
so what version is yours?
Click to expand...
Click to collapse
thanks man,,, i tried it to erickas nighlly it works for swapping but some issue, like bluetooth is not turning on..do u think link2sd is compatible to nightly?
mizukage said:
thanks man,,, i tried it to erickas nighlly it works for swapping but some issue, like bluetooth is not turning on..do u think link2sd is compatible to nightly?
Click to expand...
Click to collapse
bluethooth is a common issue.
You can try other roms
Take a look at my thread on how to move apps to sd without any script and partition
Link : http://forum.xda-developers.com/showthread.php?t=2211984
Sent from my GT-S5830 using xda premium
anasfeelgood said:
Hy everybody,
My question is at the bottom
Internal memory is not enough on galaxy ACE ? sd card can be partitioned and used with "llink2sd" as internal memory.
I did :
- Using MiniTool Partition Wizard Home Edition I partitioned SD card to two primary fat32 partitions.
- I rebooted my phone with sd card in it
- EXPECTED it to be mounted correctly, to run Link2SD to format second partition to ext3 or keep it fat32 or wathever.
BUT :
Android says that sd card is damaged
Reasons :
- Android expects one partition formatted in FAT32 with no MBR (?) in the begining of the memory :silly:
Solution :
- Partition memory with a tool that can tell Android how to read MBR or how to deal with multi partition sd card. tools like Rom manager.
My question is, is there another way to tell Android how to deal with my sd card ? without changing the rom ? using for example terminal emulator ? or can you please explain to me how I can use Rom manager to partition ? cause I didn't succeed with it.
and pleeease I'm just fed up with answers like :
"but why do you need to partition ?"
"why don't u just use app2sd ?"
"why don't you get a girlfriend instead of spending all your time on a phone that you hate ?"
NB : I updated my phone manually to 2.3.6 then rooted it. I don't want to use custom roms EXCEPT if you give me a hint about the best roms arround
Thank you in advance
Click to expand...
Click to collapse
Welcome to the forum.
Our Ace (and other phones) doesn't recognize a SD card partitioned with MiniTool Partition Wizard.
Instead download CWM 5 here: http://forum.xda-developers.com/showthread.php?t=1291327
Then turn the phone off. Reboot into recovery mode by holding the power and the home button till the Samsung logo appears for the second time. Choose apply update from SD card and install CWM.
Reboot into recovery again. This time there should be the CWM recovery.
Select Advanced > Partition sdcard
But backup the data on your SD card using your computer before doing that and restore them afterwards.
Then reboot the phone and Link2SD and the OS will recognize the card. However, this method will create an ext partition which is better for that use.
For ROMs:
This is the best I have found so far: http://forum.xda-developers.com/showthread.php?t=2173576
If you want Cm, try this: http://forum.xda-developers.com/showthread.php?t=2212438 or http://forum.xda-developers.com/showthread.php?t=2199575
If you want a standard Android, flash this: http://forum.xda-developers.com/showthread.php?t=2181854
Please be so kind and click thanks if I helped you.
---------- Post added at 05:19 PM ---------- Previous post was at 05:18 PM ----------
NEVER use ROM Manager on this phone! It will hard-brick it which will be the very end of the phone as the hardware will be destroyed!!!
Will the CWM process work with Battery Extender Kernel ???
cennation4apprentice said:
Will the CWM process work with Battery Extender Kernel ???
Click to expand...
Click to collapse
Works with any kernel, any Rom. But backup everything on your memory card before partitioning. Partitioning erases everything on it. And by the way, if the commands I gave on my thread haven't worked for you, check for my previous post on the thread. These commands must work on gingerbread and the ones in op should work for cm10.1
Sent from my GT-S5830 using xda premium
Actually, you can use Minitool Partition Wizard to be use with Link2SD.
First make sure your phone is rooted.
Second, by using minitool make 2 partition on sd card.
First Partition make sure It PRIMARY and file system is FAT32
Second Partition also make sure it PRIMARY and file system is EXT3 or EXT4
(I would like to recommend EXT3 because many roms support this file system)
Install the Link2SD, open the app, select the file system and reboot.
You will get your Link2SD worked.
ps : How about using Final S'Periance rom with Memory Mod kernel. Just do the SD Card Partition and flash the rom. All your problem with internal memory will gone.
hanzalah83 said:
Actually, you can use Minitool Partition Wizard to be use with Link2SD.
First make sure your phone is rooted.
Second, by using minitool make 2 partition on sd card.
First Partition make sure It PRIMARY and file system is FAT32
Second Partition also make sure it PRIMARY and file system is EXT3 or EXT4
(I would like to recommend EXT3 because many roms support this file system)
Install the Link2SD, open the app, select the file system and reboot.
You will get your Link2SD worked.
ps : How about using Final S'Periance rom with Memory Mod kernel. Just do the SD Card Partition and flash the rom. All your problem with internal memory will gone.
Click to expand...
Click to collapse
DON'T DO THIS!
Link2SD will work but your first partition won't be recognized, at least in Jelly Bean.
anasfeelgood said:
Hy everybody,
My question is at the bottom
Internal memory is not enough on galaxy ACE ? sd card can be partitioned and used with "llink2sd" as internal memory.
I did :
- Using MiniTool Partition Wizard Home Edition I partitioned SD card to two primary fat32 partitions.
- I rebooted my phone with sd card in it
- EXPECTED it to be mounted correctly, to run Link2SD to format second partition to ext3 or keep it fat32 or wathever.
BUT :
Android says that sd card is damaged
Reasons :
- Android expects one partition formatted in FAT32 with no MBR (?) in the begining of the memory :silly:
Solution :
- Partition memory with a tool that can tell Android how to read MBR or how to deal with multi partition sd card. tools like Rom manager.
My question is, is there another way to tell Android how to deal with my sd card ? without changing the rom ? using for example terminal emulator ? or can you please explain to me how I can use Rom manager to partition ? cause I didn't succeed with it.
and pleeease I'm just fed up with answers like :
"but why do you need to partition ?"
"why don't u just use app2sd ?"
"why don't you get a girlfriend instead of spending all your time on a phone that you hate ?"
NB : I updated my phone manually to 2.3.6 then rooted it. I don't want to use custom roms EXCEPT if you give me a hint about the best roms arround
Thank you in advance
Click to expand...
Click to collapse
The Best Roms around are :-
M'rage Rom
SGS2 Rom
Monster X2 Rom
Sperience Rom
Spongebob Rom
First of all reboot your phone to Recovery Mode then go to Advance option and then partition SD Card and select any size you want I recommend 512 MB as it can hold most of the things you want to install. Then wait until it finished partitioning process (REMEMBER TO BACKUP ALL YOUR SD DATA BEFORE PARTITIONING AS IT FORMATS YOUR SD IN THE PROCESS) and then download any of the scripts I recommend CronMod-INT2EXT+_signed (Download it from: http://forum.xda-developers.com/showthread.php?t=1716124 ) as it supports EXT 2/3/4 filesystems and then copy it onto the root of your SD then go to mount settings in Recovery Mode and then mount sd-ext and then select install zip from SD Card then select CronMod-INT2EXT+_signed.zip and flash it then just reboot and you should have increased internal memory.
Here is the link to the video in which I flash Ultimatum The "A" Factor ROM and then increase the internal memory of Samsung Galaxy Ace S-5830.
http://www.youtube.com/watch?v=auBZHHXmeKQ
Does not work
Does not work, and this process did not increase the internal memory.
DiogoReis7 said:
Does not work, and this process did not increase the internal memory.
Click to expand...
Click to collapse
Please extract the 40int2ext file to init.d folder then reboot and then tell me what happens... :highfive:
zxyvw, Why are you asking for using a sd-ext partition if you opened your own thread explaining how to increase the internal memory space??
THIS IS NOT THE CORRECT SITE TO POST THIS TUTORIAL...
Try my new method it is guaranteed by me to work... If it doesn't jump off a building...
when I try to install it, it gives me Status 2,
zxyvw said:
First of all reboot your phone to Recovery Mode then go to Advance option and then partition SD Card and select any size you want I recommend 512 MB as it can hold most of the things you want to install. Then wait until it finished partitioning process (REMEMBER TO BACKUP ALL YOUR SD DATA BEFORE PARTITIONING AS IT FORMATS YOUR SD IN THE PROCESS) and then download any of the scripts I recommend INT2EXTV2+ (Download it from: http://forum.xda-developers.com/showthread.php?t=1716124 ) as it supports EXT 2/3/4 filesystems and then copy it onto the root of your SD then go to mount settings in Recovery Mode and then mount sd-ext and then select install zip from SD Card then select INT2EXTV2+.zip and flash it then just reboot and you should have increased internal memory.
Click to expand...
Click to collapse
when I try to install it, it gives me Status 2, what should I do? I have a Galaxy Ace M
Try using INT2EXT4+. I'm sure it will work. And then update me and please thank me for helping you...
my internal memory is stil the same....wat do u mean by copying the zip file to thr root of my SD??
Justcopy and paste the file on the root of the SD BTW just mount sd-ext before flashing the zip file and restart and tell me what happens...
Sent from my GT-S5830 using Tapatalk 2
I copyed and pasted the zip file onto my SD....then i mounted the sd-ext and afta flashed the INT2EXT 4+ . Zip..........rebooted the phone and stul....nothing hz happend.....my internal memory is stil 181 MB....can u help send a video of ur tutorial, or something clearer...plizzz...i need ur help...thx
O.K. I will make a video for you sometime today and send you the link.
ivanmex18 said:
I copyed and pasted the zip file onto my SD....then i mounted the sd-ext and afta flashed the INT2EXT 4+ . Zip..........rebooted the phone and stul....nothing hz happend.....my internal memory is stil 181 MB....can u help send a video of ur tutorial, or something clearer...plizzz...i need ur help...thx
Click to expand...
Click to collapse
Just install this ROM it does all the work for you... http://forum.xda-developers.com/showthread.php?t=2338702
K? If you can't then then tell me I will help in any possible way... Thank me if I helped you.
ivanmex18 said:
I copyed and pasted the zip file onto my SD....then i mounted the sd-ext and afta flashed the INT2EXT 4+ . Zip..........rebooted the phone and stul....nothing hz happend.....my internal memory is stil 181 MB....can u help send a video of ur tutorial, or something clearer...plizzz...i need ur help...thx
Click to expand...
Click to collapse
Mount the sd-ext then mount it then flash the .zip and then restart the mobile...
Partitioning SD Card to Increase Internal Memory
Hey Guys,
(For this to work your phone must be rooted)
To increase the Internal Memory of Galaxy Ace is really easy. You don't need to do all these time killing steps. Just do as I do.
You can do this by Partitioning your SD Card. This means having a separation in your SD Card to store apps. Follow these steps :
1) Download Mini Tool Partition Wizard 7 on your PC.
2) Connect your SD Card to PC by an SD Card Adapter or connect your phone to PC by a USB Cable.
3) Open Mini Tool Partition Wizard.
4) You'll see a Disk 2 Region. In that you'll see your SD Card.
5) Right click on it and select Delete.
6) It'll show your SD Card as Unallocated.
7) Right click on it again and select Create.
8) A new Window opens.
In that, put the data as the following :
Partition Label : (As you wish)
Create as : Primary
File System : FAT32
Cluster Size : Default
Drive Letter : (As you wish)
Size and Location : Put Partition Size as the size of the SD Card you want.
The Unallocated size will be the size of your Partition.
9) Click OK
10) You'll see the Apply button on the Top-left Corner. Click on it. (Don't put your system in Power Saving Mode)
11) Wait for the procedure to be completed.
12) Now, Download Link2SD.apk on your system and move it to your SD Card.
13) Close every thing and Switch On your phone with the SD Card in it.
14) Install Link2SD.apk and open it.
15) Follow every thing as it says and restart your phone.
16) After that Select the app you want to move to the Partion.
17) Click on Create Link.
18) Move as much apps as you like...!
Hope that this helped you guys. Thanks :fingers-crossed:
Go and make your own thread the reply functions is provided to comment and ask questions and not to show some other method which you know of and which is not guaranteed... My guide is 100% guaranteed by me...
Try [SCRIPTS]CronMod-INT2EXT .http://forum.xda-developers.com/showthread.php?t=1716124. Check the link for more info.
Galaxy Ace GT S5830 said:
....
12) Now, Download Link2SD.apk on your system and move it to your SD Card.
13) Close every thing and Switch On your phone with the SD Card in it.
14) Install Link2SD.apk and open it.
15) Follow every thing as it says and restart your phone.
....
Click to expand...
Click to collapse
Exactly. Link2SD always worked better than any script for me.
Also, you can get it from the android market.
This worked great for me.. thanks for the help.. but I have a problem, I wanted to flash a kernel (from MHNK to BE1.6) but after flashing the kernel, I lost all the partition and my installed apps, I only wiped cache partition and dalvik cache in cwm. Do I have to do anything (like mount sd-ext) before flashing the kernel? But luckily I backed up my rom before flashing the kernel thus got back my partition. Help me please..
Sent from my Galaxy Nexus using xda app-developers app
jeromejeremytay said:
This worked great for me.. thanks for the help.. but I have a problem, I wanted to flash a kernel (from MHNK to BE1.6) but after flashing the kernel, I lost all the partition and my installed apps, I only wiped cache partition and dalvik cache in cwm. Do I have to do anything (like mount sd-ext) before flashing the kernel? But luckily I backed up my rom before flashing the kernel thus got back my partition. Help me please..
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I would recommend that you mount everything except USB Storage and then try to flash the kernel... If it still doesn't work please don't be shy to ask me... :good:
i'm going to try this, i already increased my internal memory but the script was already on the rom
I have just ROOTED my S5830 and installed app2SD in the hope of moving as many aps as possible to my SD card.
I tried Link2SD but I had problems and it would not transfer anything, even if I formatted my SD card with CWM.
I was sucessful with app2SD but for some reason I was only allowed to move 2 apps to my SD card.
At this point I had 62Mb of free memory on my phone. I only installed one app, Angry Birds, and this reduced my free memory to 19Mb of free memory. The app was transferred to the SD card.
So where am I going wrong?
I have done everything possible to free up my phone memory but I am not allowed to transfer anything.
the lemming said:
I have just ROOTED my S5830 and installed app2SD in the hope of moving as many aps as possible to my SD card.
I tried Link2SD but I had problems and it would not transfer anything, even if I formatted my SD card with CWM.
I was sucessful with app2SD but for some reason I was only allowed to move 2 apps to my SD card.
At this point I had 62Mb of free memory on my phone. I only installed one app, Angry Birds, and this reduced my free memory to 19Mb of free memory. The app was transferred to the SD card.
So where am I going wrong?
I have done everything possible to free up my phone memory but I am not allowed to transfer anything.
Click to expand...
Click to collapse
IMO the best script and the simplest is int2ext script
I explained here how to install it and provided download link
http://forum.xda-developers.com/showthread.php?t=2416373
Viper The Ripper said:
IMO the best script and the simplest is int2ext script
I explained here how to install it and provided download link
http://forum.xda-developers.com/showthread.php?t=2416373
Click to expand...
Click to collapse
I must be a bit thick today, as I do not understand anything in the link you provided. I even read it several times but I still don't understand.
Sorry
Have you partition your memory card ??? Link2sd is only work with partitioned memory card.
Hit Thanks if i help,
Sent from cooperve.
My SD card is partitioned. I've used minitools, gparted and the partitioning tool on my phone.
Is there something that I should be doing besides getting link2sd on Google.Play?
So far I can only transfer 3 apps, which isn't all that helpful with my limited phone storage space.
Flash stock rom via odin and try all steps again. I think
your internel storage is used by any big custom rom.BTW Which Rom you are using now stock rom or custom rom ???
Hit Thanks if i help,
Sent from cooperve.
easy steps for your brother
1 choose a good cm or custom or stock as you wish
2 if you wanna stay on current rom stay on it
3 uninstall all apps on sd card or internal memory
4 go to recovery
5 wipe cache
6 wipe dalvik cache
7 format cache
8 format sd card
9 go to advanced option and create a second partition of any size {prefer making till 512 mb and if more than only up to 1 gb}
10 if you are using stock rom then search for a kernel which support ext partition support and int.d support
11 flash that kernel if on stock rom
12 reboot into recovery and mount system in mount and storage option
13 choose the script from install from sd card and flash it after it clear cache partition {not dalvik cache] and reboot
14 have a nice smile on your face
best of luck
HIT THANKS COS I HAVE TYPED SO MUCH AND YOU JUST HAVE TO HIT A BUTTON
hahaha
the lemming said:
I must be a bit thick today, as I do not understand anything in the link you provided. I even read it several times but I still don't understand.
Sorry
Click to expand...
Click to collapse
Int2ext script:
1. download it and put it in sdcard's root
2. boot into cwm
3. mount /system /data and /sd-ext
4. format /sd-ext
5. flash the script
6. enjoy
Download Link:
http://d-h.st/Otj
Click to expand...
Click to collapse
Hi all ...
After searching fo rthe same .. Found that no answer is available to increase the application memory which is 0.96GB (Default depend on the ROM you are flashing) , I have found this way my self. Pre-requisites are same rooted, SU binary installed, an SD Card, SD Card Reader & Attention
1) Initially clear the whole SD card after mounting it on your PC (I mean Format -OU WILL LOOSE ALL DATA, BACKUP IF YOU HAVE ANYTHING REQUIRED)
2) Download MiniTool Partition Manager Google or get it here
3) After installing. find the SD card in the downloaded application.
4) Delete all the existing partitions
5) Now you can see the SD Card as Unallocated Space
6) Right click on that and hit Create Partition and select Primary and FAT32
7) Now you have to right click the same and select resize.
8) In that leaving 1GB or how much you want for application memory.. just leave that amount of space and select OK.
9) Now right click the left out space of 1GB or how much you have selected and hit create partition.
10) By default it pops a mesage, igone it and make sure you select Primary and FAT32 file system and then Apply
11) That's it... go ahead and hit apply changes at the top left of the window and wait till the process completes.
12) Now Place the SD card in to the phine and install Link2SD through play store.
13) After opening it.. it asks to select the file system to which it has to look up for.. Select Fat32 there.
14) It pops up a window for restarting which will fail.. Just restart manually...
15) After restart if you open Link2SD, it will not ask you for selecting the file system again .This is the proof for confirming that everything was working fine. Now hitting the options button while in Link2SD app brings up the settings menu in which you can select the default installation location to external and notifications settings to disable.
Thats'it. If my steps are confusing.. refer to our friends thread for Lnk2SD tutorial under Droid Section with screenshots.here.
But remember carefully that in the 8th step instead of ext3 you need to select FAT32 .
Thanks XDA... If you guyz find this helpful, please leave thanks
Reserved..
I forgot to put [TUT] in the thread name.. and unable to change. Mods please. :cyclops: