Got it back to it's original state....would like to update to 4.1.1 of someone call tell me the correct files to use?
Thanks
Hi, I did a search but wasn't able to find an answer...
This is what was running on my phone:
AT&T Samsung Captivate SGH-1897 Rooted
Android V/ 4.0.4
Baseband V/ I9000UGKG3
Kernel V 3.0.8-g2311908/[email protected] #1
Cyanogenmod V/9-20120819-nightly-captivatemid
I placed these three zip files on to the phone:
cm-10-20121118-NIGHTLY-captivatemtd.zip
gapps-jb-20121011-signed.zip
kernel_V10_4_2_15.zip
I use recovery cwm 6.0.1.2 and did a backup
I then use it to install "kernel_V10_4_2_15.zip" it FAILED so I then used recovery to install "cm-10-20121118-NIGHTLY-captivatemtd.zip" it FAILED
So, I use recovery to put the backup on...and it show cyanogen (mod) 9 FLASHING and would NOT boot.
I went back to recovery....did advanced restore and restored BOOT SUCCESSFUL
then I restored SYSTEM SUCCESS
then I did reboot
the cyanogen (mod) 9 FLASHING and will not go any further.
I was trying to update the phone to 4.1.1 and now have NOTHING...
Can anyone help and tell me what I have to do. I can still get into recovery cwm 6.0.1.2
Thanks will be watching for some help...:crying::fingers-crossed:
MORE INFORMATION:
I went back into recover (after it would not boot the first time) and cleared the cache
this is the error report I received:
checking for extendedcommand
file not found
Wiping cache
formatting cache
mtd not erasing bad block @ 0x0x00100000
I can't partition unsafe device /dev/block/mmcblkopi
I can't format volume unknown, volume external_sd
I can't partition unsafe device /dev/block/mmcblk1p1
failed to mound /dev/block/mmcb1k0p2
invailid argument
Have you tried getting in DL mode and flashing stock KK4?
I think that's your easiest/fastest solution.
From there, flash corn kernel to get root and flash the ROM you want as per their instructions.
Stuck on the AT&T screen
BWolf56 said:
Have you tried getting in DL mode and flashing stock KK4?
I think that's your easiest/fastest solution.
From there, flash corn kernel to get root and flash the ROM you want as per their instructions.
Click to expand...
Click to collapse
Thanks...I flashed the KK4 and the corn kernel and I am STUCK on the AT&T screen. I can still get into download mode but no longer can I get CWM recovery...
Any suggestions?
Thanks
Donna aka gramme
I put the phone in DL mode and used:
i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe.exe
I am now at stock....how can I get to 4.1.1? Any help here? Do I just put on the Cyanogenmon10 or do I have to do something else. I am very confused now...not rooted either
Thanks
gramme66 said:
Thanks...I flashed the KK4 and the corn kernel and I am STUCK on the AT&T screen. I can still get into download mode but no longer can I get CWM recovery...
Any suggestions?
Thanks
Donna aka gramme
I put the phone in DL mode and used:
i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe.exe
I am now at stock....how can I get to 4.1.1? Any help here? Do I just put on the Cyanogenmon10 or do I have to do something else. I am very confused now...not rooted either
Thanks
Click to expand...
Click to collapse
What button combo are you using to get in recovery?
Also, I would suggest to re-download Corn kernel and re-flash it.
gramme66 said:
Thanks...I flashed the KK4 and the corn kernel and I am STUCK on the AT&T screen. I can still get into download mode but no longer can I get CWM recovery...
Any suggestions?
Thanks
Donna aka gramme
I put the phone in DL mode and used:
i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe.exe
I am now at stock....how can I get to 4.1.1? Any help here? Do I just put on the Cyanogenmon10 or do I have to do something else. I am very confused now...not rooted either
Thanks
Click to expand...
Click to collapse
Now after getting back to GB 2.3.5 and I am rooted...I am NOT able to update to ICS 4.0.4 where I was...when I use the CWM recovery to flash the zip it says signature failed....Is there something that will flash a zip file via download mode?
Thans
ka
gramme66 said:
Now after getting back to GB 2.3.5 and I am rooted...I am NOT able to update to ICS 4.0.4 where I was...when I use the CWM recovery to flash the zip it says signature failed....Is there something that will flash a zip file via download mode?
Thans
ka
Click to expand...
Click to collapse
You're simply not rooted. go in recovery and make sure root is enabled (assuming you flashed corn kernel that is).
Was Rooted...all is fine now...
BWolf56 said:
You're simply not rooted. go in recovery and make sure root is enabled (assuming you flashed corn kernel that is).
Click to expand...
Click to collapse
Thanks for your response...I finally figured it all out!!!!!!!!!! My CWM was stock which is 3e recovery and requires signature verification....I had NOT use the corn kernel but flash some zip file that roots...don't remember the name. I then realized that it probably did NOT install CWM a newer version so I put the corn kernel on that would put on CWM that would work...Once I had the proper recovery on I was able to put my 4.0.4 back on and CMod9. Then nothing worked properly everything not working like Gmail Media something so I put on gapps the latest that didn't help. I put my TB on that didn't work well 5 failed....google mail would still not work and the something media kept giving a bad message...
I went into recovery and put on a recovery back up I had done 2 days ago and ALL is now WORKING great...
I still want to update to 4.1.1 Jelly Bean but the files I have don't work so I need to look around for a different ROM and ideas would help.
Thanks again for your time...
Donna aka gramme
I recommend this Rom by the Collective... http://forum.xda-developers.com/showthread.php?p=31145604
Sent from my SGH-I897 using xda premium
4-2ndtwin said:
I recommend this Rom by the Collective... http://forum.xda-developers.com/showthread.php?p=31145604
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
+1
10char
Related
Hi all,
I installed JPY (2.2.1) Rom on my SGS yesterday, rooted my phone with SuperOneClick.
Tested the phone, everything is ok and the root is also ok.
Then installed Clockworkmod, flash cwm recovery 2.5.1.2, click on Backup, the phone automatic rebooted but presented my with a normal recovery screen.
In it I can do something like; a factory reset, clean card data, restart or click on update.zip (I thing that goes to the update.zip that cwm put on my sdcard).
But when I click it gives this error:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Tried everything... What can I do in order to cwm works and backups my sgs??
All the help is appreciated...
Thanks,
you loose 2e recover when going to froyo.. needed for clockwork ..
flash a kernel that restores it ie
chainfire/cf or speedmod or backlight notifiction ie bln kernel.
lgkahn said:
you loose 2e recover when going to froyo.. needed for clockwork ..
flash a kernel that restores it ie
chainfire/cf or speedmod or backlight notifiction ie bln kernel.
Click to expand...
Click to collapse
So what are you saying is that CWR doesn't work with 3e recovery? Only with 2e?
Because 3e does not allow unsigned zips hence the error message..
Sent from my GT-I9000 using XDA App
Sâmes problem for me... No solution found yet ...
Sent from my GT-I9000 using XDA App
install CF-root http://forum.xda-developers.com/showthread.php?t=788108 to get 2e recovery then reflash CWM recovery and try again...
striken said:
So what are you saying is that CWR doesn't work with 3e recovery? Only with 2e?
Click to expand...
Click to collapse
ah ya.. the "needed for clockwork" in my original message pretty much states that.
android.francis said:
Because 3e does not allow unsigned zips hence the error message..
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks for the explanation,
Didn't know why it works with one and not the other...
Anyway, its working now, thanks for all the help!
For anyone that has the same problem, here is what I did:
Flashed the phone with I9000XXJPY and with Odin. You can find JPY here: http://www.multiupload.com/UHJNT0K1F2
Put PIT 512 in PIT and in PDA put the file JPY_JPY_JPY.tar (no repartition selected).
Shutdown the phone after it starts.
Start Odin again and in PDA put this file: CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
You can download it here:
http://forum.xda-developers.com/showthread.php?t=788108
After that you can install CWM. When you click in backup and the phone restarts see if 2e restore appears in top of the screen if so all is ok.
Also, if a normal screen appears just click in update.zip and after that you will see the cwm screen.
In the cwm recovery screen the sgs buttons are like this: back button is the “enter” and the “menu” is the back button.
P.S. If you need to install TPH for Portuguese language just tell me, cause the CSC installed is KOR and you don't have TPH in CSC file to install.
Once again, Thanks to all who help me!
striken said:
Thanks for the explanation,
Didn't know why it works with one and not the other...
Anyway, its working now, thanks for all the help!
For anyone that had the same problem, here is what I did:
Flashed the phone with I9000XXJPY and with Odin. You can find JPY here: http://www.multiupload.com/UHJNT0K1F2
Put PIT 512 in PIT and in PDA put the file JPY_JPY_JPY.tar (no repartition selected).
Shutdown the phone after it starts.
Start Odin again and in PDA put this file: CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
You can download it here:
http://forum.xda-developers.com/showthread.php?t=788108
After that you can install CWM. When you click in backup and the phone restarts see if 2e restore appears in top of the screen if so all is ok.
Also, if a normal screen appears just click in update.zip and after that you will see the cwm screen.
In the cwm recovery screen the sgs buttons are like this: back button is the “enter” and the “menu” is the back button.
P.S. If you need to install TPH for Portuguese language just tell me, cause the CSC installed is KOR and you don't have TPH in CSC file to install.
Once again, Thanks to all who help me!
Click to expand...
Click to collapse
Great explanation but for the record (for anyone looking for a solution), if you're already on a 2.2 firmware, you can simple start at the step of flashing a custom kernel that supports CWM (i.e. there's no need to first flash to JPY).
gtg2 said:
Great explanation but for the record (for anyone looking for a solution), if you're already on a 2.2 firmware, you can simple start at the step of flashing a custom kernel that supports CWM (i.e. there's no need to first flash to JPY).
Click to expand...
Click to collapse
That's a thing I didn't know.
Winrar is asking for a password?
imprezzadude said:
Winrar is asking for a password?
Click to expand...
Click to collapse
On what files?
On the I9000JPY file. Sorry i didnt specify. Been a loong day lol
I am Facing Similar problem...
i wanted to install new rom on my phone ...i.e. darky's v 8.0
so i rooted my phone with z4root, then downloaded the rom and the update.zip file for clockward mod on to internal sd card..
and when tried to run update.zip file in normal recovery mode to get into clockward recovery i got the same signature error
i looked for solutions..got to know about rom manager..downloaded it and installed clockward mod through it..and then tried to reboot into clockward recovery ...it will bring me to same normal recovery screen...so basically stuck and cant get to clockward recovery...please help
my phone details
model gt-i9000
firmware:2.2
baseband : i9000zsjpe
deepumalik said:
I am Facing Similar problem...
i wanted to install new rom on my phone ...i.e. darky's v 8.0
so i rooted my phone with z4root, then downloaded the rom and the update.zip file for clockward mod on to internal sd card..
and when tried to run update.zip file in normal recovery mode to get into clockward recovery i got the same signature error
i looked for solutions..got to know about rom manager..downloaded it and installed clockward mod through it..and then tried to reboot into clockward recovery ...it will bring me to same normal recovery screen...so basically stuck and cant get to clockward recovery...please help
my phone details
model gt-i9000
firmware:2.2
baseband : i9000zsjpe
Click to expand...
Click to collapse
How about
1. Repartition with a 512 pit from odin.
2. Flash Stock JM8 or JM9 (Usually i am flashing JM8 when things get messed)
3. Use update zip and install clockworkmod from it . (you will not have any signature errors because now you have recovery 2e)
4. Sometimes you will have to apply sd card update twice to get to CWM.
5. Vola, now you have working clockworkmod recovery and you can flash whatever the things you want with it
androidsl said:
How about
1. Repartition with a 512 pit from odin.
2. Flash Stock JM8 or JM9 (Usually i am flashing JM8 when things get messed)
3. Use update zip and install clockworkmod from it . (you will not have any signature errors because now you have recovery 2e)
4. Sometimes you will have to apply sd card update twice to get to CWM.
5. Vola, now you have working clockworkmod recovery and you can flash whatever the things you want with it
Click to expand...
Click to collapse
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
lgkahn said:
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
Click to expand...
Click to collapse
Oh yeah. forgot to mention it. there is a post that have a kernel which gives you recovery 2e on JPY firmware. (Don't know other firmwares has it or not)
Anyway, in my case i like to blow everything and start all over when i got messed up. because i don't use my sgs for very precious works. i'm just playing with it
Kudos to the lgkahn for bringing this kernel thing up
lgkahn said:
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
Click to expand...
Click to collapse
I am really a starter..when it comes to all this will be able guide me a little bit please..what exactly do you mean and what do i search for...thanks a lot for all your help...
Okay..seems like this thread is getting nowhere..
Go to the android development section and look for hardcore's speedmod kernel. Download the latest version and flash it via Odin.
Btw, let me give you a tip once you are in hardcore's thread. PLEASE READ THE FIRST 3-4 POSTS AND FOLLOW INSTRUCTIONS.
I don't think you are exerting enough effort to research here in the forum so I just gave you one of the simplest and shortest step to have CWM directly.
Sent from my GT-I9000 using XDA App
is it OK to use Stericssion autosin.bat to sign the update.zip downloaded by CWM and then flash it using recovery 3e? We will not have to flash the CF Kernel.
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!
I am just about to throw my phone at the wall.
So I was on stock 2.3.3 and decided I wanted to update to ICS
http://forum.xda-developers.com/showthread.php?t=1488096
I didn't have clockwork mod and wasn't rooted so I eventually got this working
http://forum.xda-developers.com/showthread.php?t=788108
Then I tried to install the ICS rom but it wouldn't work. I then tried to flash http://forum.xda-developers.com/showthread.php?t=1353657 which for some reason didnt have any cell phone coverage.
I tried going back to the just rooted version of 2.3.3 but haven't been able to get the phone to go past the samsung logo / Clockwork Recovery.
Edit: Whenever I try flash the 2.3.3 rooted rom it updates me to Clockwork Mod Recovery v3.0.0.5 with HEAPS of errors.
Any ideas?
You should go back to a stock rom via Odin...you will need a rom that has 3 files (csc , modem, phone) and the Odin 512 .pit file and check the repartition box.
Hawkester said:
I am just about to throw my phone at the wall.
So I was on stock 2.3.3 and decided I wanted to update to ICS
http://forum.xda-developers.com/showthread.php?t=1488096
I didn't have clockwork mod and wasn't rooted so I eventually got this working
http://forum.xda-developers.com/showthread.php?t=788108
Then I tried to install the ICS rom but it wouldn't work. I then tried to flash http://forum.xda-developers.com/showthread.php?t=1353657 which for some reason didnt have any cell phone coverage.
I tried going back to the just rooted version of 2.3.3 but haven't been able to get the phone to go past the samsung logo / Clockwork Recovery.
Edit: Whenever I try flash the 2.3.3 rooted rom it updates me to Clockwork Mod Recovery v3.0.0.5 with HEAPS of errors.
Any ideas?
Click to expand...
Click to collapse
Hi bro
1. Did you download the right cf root? and how did you flash it?
2. what did it say when you installed ics? did you wipe data?
3. how did you flash back to stock?
imgibby123 said:
You should go back to a stock rom via Odin...you will need a rom that has 3 files (csc , modem, phone) and the Odin 512 .pit file and check the repartition box.
Click to expand...
Click to collapse
I've since downloaded the stock file from here http://forum.xda-developers.com/showthread.php?t=846913 and im up and running again. I don't think ill be flashing anytime soon :L
NamNamNom said:
Hi bro
1. Did you download the right cf root? and how did you flash it?
2. what did it say when you installed ics? did you wipe data?
3. how did you flash back to stock?
Click to expand...
Click to collapse
I flashed the cf root the same as the software my phone had under settings. I flashed it using odin.
There was an error message, I can't recall it exactly, it couldn't execute or something. Yup I wiped data.
Flash back to stock using odin
Thanks for the help guys
Did you solve it?
NamNamNom said:
Did you solve it?
Click to expand...
Click to collapse
Half solved, im back on stock gingerbread.
Hawkester said:
Half solved, im back on stock gingerbread.
Click to expand...
Click to collapse
I recomend flashing Codename android 1.5.5, steps:
Download the latest CNA for Galaxy S, and Gapps
Get into CWM
Wipe dalvik/cache/data
flash it
flash Gapps
Done!
This is the first time I've had this happen - see many others in similar situation but now it's me :-(
I was rocking the most stable, smooth and battery- life- loving setup of ICS ever on my i9000 after trying almost all of the Roms and kernels out there.
In the end the Elite7.1Beta worked amazingly for me and I set it all up just nice and really had no reason to start messing with it.
....So I messed with it (to get even better battery life) and flashed the B6 ICY Glitch kernel and then - bootloop.
So I need an ICS/CM9 tar kernel file (any with CWM recovery will do) that I can use to reflash the original Devil 15.1 kernel.
Believe me, I've searched and serched and simply cannot find a tar version of any of the main ICS kernels out there (glitch, semaphone, devil etc). Why are there no more tar files anymore? Am I missing something?
I've even tried extracting the kernel from boot.img using cygwin and a tutorial I found on the net - but being an untran00b I did something horribly wrong and now thank goodness I can still get Download mode.
So:
Can someone please let me know where I can find a .tar kernel for ICS/CM9 that I can flash with Odin? Or how to make one from a kernel .zip or boot.img file?
OR: Can I just flash a boot.img in Odin (doesn't look like it but just wondering?) I'v not tried that because I've messed this up enough already.
Any help greatly appreciated
alsheron said:
So:
Can someone please let me know where I can find a .tar kernel for ICS/CM9 that I can flash with Odin? Or how to make one from a kernel .zip or boot.img file?
OR: Can I just flash a boot.img in Odin (doesn't look like it but just wondering?) I'v not tried that because I've messed this up enough already.
Any help greatly appreciated
Click to expand...
Click to collapse
Try this, it should get your cwm back
unpack and flash as pda in odin
ssdd48 said:
Try this, it should get your cwm back
unpack and flash as pda in odin
Click to expand...
Click to collapse
well i was in the same situation and i didnt have ssdd48 to help me ..
try his method i have read that it works .. if not i believe there is a speedmod kernel which has a tar file google that
for me eventually nothing worked so i had to flash a gingerbread rom thru odin and start over .. good luck
Thanks for the replies guys. Managed to fix it in the end using Darkcore kernel which gave me working recovery (even though Gingerbread based) but really appreciate you linking me the recovery file ssdd48.
Cheers!
I have the same problem with B6!! But I use the ssdd48 way, and it works perfectly (really thanks), after that y flashed again B6 via CWM and it works fine.
I might be wrong but doesn't Heimdall support flashing boot.img?
Sent from my GT-I9000
Thanx man ! I've Been waiting for a fix reocery tar for ICS.
ssdd48 said:
Try this, it should get your cwm back
unpack and flash as pda in odin
Click to expand...
Click to collapse
hey mate, when you flash a kernel you dont lose any data right? I only need to get into CWM because I get bootloops and then I will reflash semaphore kernel
should "auto reboot" in odin be enabled?
romdroid. said:
hey mate, when you flash a kernel you dont lose any data right? I only need to get into CWM because I get bootloops and then I will reflash semaphore kernel
should "auto reboot" in odin be enabled?
Click to expand...
Click to collapse
There is no harm in it being checked. Lets you find out straight away that its been fixed
thanks
ssdd48 said:
Try this, it should get your cwm back
unpack and flash as pda in odin
Click to expand...
Click to collapse
thanks! it works!
Interesting.
I just re-flashed the ROM via CWM.
It includes a kernel.
If that didn't work, I'd use the kernel cleaning script, and the re-flash the ROM.
Hi,
I tried to flash the datafix for CM9 but it got me into a bootloop (using semaphore 1.0.1s kernel).
I flashed this file to fix the recovery but from here things aren't going so well...
I tried to restore my nandroid backup - didn't work (tried to restore only /system though, but saw it failed).
then I tried to reflash CM9 (19.4 nightly) - failed.
then I tried to reflash the semaphore kernel - succeeded but now my phone is stuck on the "galaxy S gt-1900 screen" (I can get into the recovery though, the one included in the fix).
What can I do now? I can't even get my phone to boot...
Thanks!
TheeWolf said:
Hi,
I tried to flash the datafix for CM9 but it got me into a bootloop (using semaphore 1.0.1s kernel).
I flashed this file to fix the recovery but from here things aren't going so well...
I tried to restore my nandroid backup - didn't work (tried to restore only /system though, but saw it failed).
then I tried to reflash CM9 (19.4 nightly) - failed.
then I tried to reflash the semaphore kernel - succeeded but now my phone is stuck on the "galaxy S gt-1900 screen" (I can get into the recovery though, the one included in the fix).
What can I do now? I can't even get my phone to boot...
Thanks!
Click to expand...
Click to collapse
Anyone?
Yes!
I was having the same problem, for 2 times now actually. The first time I had to go all the way back to gingerbread. Now it happened to me a second time, I searched again and found a solution.
I think the rescue .tar doesn't have the right CWM in it to install the ICS rom. I've found a Odin installable kernel with the right CWM, its here:
http://forum.xda-developers.com/showthread.php?t=1551410
I hope this helps more people in this situation!
TeKnoID2 said:
Yes!
I was having the same problem, for 2 times now actually. The first time I had to go all the way back to gingerbread. Now it happened to me a second time, I searched again and found a solution.
I think the rescue .tar doesn't have the right CWM in it to install the ICS rom. I've found a Odin installable kernel with the right CWM, its here:
http://forum.xda-developers.com/showthread.php?t=1551410
I hope this helps more people in this situation!
Click to expand...
Click to collapse
Thank you!! worked perfect
If I use Odin, everything will be wiped and is gone am I right?
Hi guys. Recently I bought a used I896 with I897UCKF1 2.3.3 firmware. I cannot root it or upgrade it to ICS cos I have a problem: when I press vol down button plus power button to enter download mode the phone boots normally. When I press vol up plus power button instead of recovery mode my phone enters "Android system recovery <3e>". Any advice what to do?
The combination for recovery is vol up/down+power. You will need to flash a kernel with ClockworkMod recovery baked in.
Why didn't you also tell him the proper dl mode combo?
Anyway... Its both volume buttons only, no power at all, and inserting a USB cable that boots into download mode.
[QUOTEAnyway... Its both volume buttons only, no power at all, and inserting a USB cable that boots into download mode.[/QUOTE]
Thans a lot man. My Cappy is now rooted and having 2.3.5. Right now I'm looking for a stable ICS rom. Any suggestions will be appreciated.
korockinout13 said:
The combination for recovery is vol up/down+power. You will need to flash a kernel with ClockworkMod recovery baked in.
Click to expand...
Click to collapse
Can you recommend me a kernel with cwm recovery? In my Samsung recovery menu 3e I do not have "install zip from sd card" option. Or may I use Rom Manager Premium to install ICS .zip rom?
If you are on Gingerbread and an i897 rom (KF1 would meet that requirement), you can flash boog's kernel, which will have CWM baked in.
You'll need to use something like Odin or Heimdall to get there, which boog includes in the files listed above.
The other option is to flash a stock rom with a CWM kernel included, like the one in my signature.
I'm on UCKK4 - 2.3.5. Is it ok to flash that kernel? And I ask you guys who have ICS on your Cappy is it worth to install it now or should I wait for more stable versions?
You should be able to use Boog's kernel. If you want to be 100% sure of a match, you can try corn kernel KK4.
ICS is pretty great, but be aware there is a risk (although small) of the internal SD card being messed up. Look for "Encryption Unsuccessful" in the development forum - if you flash ICS, just know what to do if that situation happens.
Hmm, you made think about it. I'm not so sure anymore about ICS. I think it's better waiting for a while. I also have a i9000 and installed ICS on it and there was a problem with external sd.
Finally I installed a 4.0.3 rom and I have to admit it was a mistake. Now I'm looking forward to get back to UCKK4 2.3.5 but I don't really know how to do it. On my internal memory I have the backup of the 2.3.5 version made before getting to 4.0.3 and I tried to restore it from the recovery menu but it doesn't work. I think I'm missing something. Can you help me? Thankx.
erycx said:
Finally I installed a 4.0.3 rom and I have to admit it was a mistake. Now I'm looking forward to get back to UCKK4 2.3.5 but I don't really know how to do it. On my internal memory I have the backup of the 2.3.5 version made before getting to 4.0.3 and I tried to restore it from the recovery menu but it doesn't work. I think I'm missing something. Can you help me? Thankx.
Click to expand...
Click to collapse
You'll need to flash back to the 2.3.5 rom you had before flashing to ICS (whatever rom you were using when you made the backup), then restore the backup in recovery.
jmtheiss said:
You'll need to flash back to the 2.3.5 rom you had before flashing to ICS (whatever rom you were using when you made the backup), then restore the backup in recovery.
Click to expand...
Click to collapse
Can you be more specific please? What are the steps I need to follow?
AOKP build 32 is very stable for me if your looking to give ics another chance. Make sure you do all the proper wipes before flashing.
Sent from my glitched ICS Captivate using XDA App
erycx said:
Can you be more specific please? What are the steps I need to follow?
Click to expand...
Click to collapse
Grab an Odin or Heimdall one-click to get back to stock KK4, and flash that. Once you've flashed back to stock KK4, if you were using any custom rom (anything non-stock), flash that to your phone. (The idea is to be as close to your previous setup as you can be.)
Once you've done those steps, reboot into recovery and go to "backup/restore". In the restore options, look for the backup you made and restore it.
cmilldrummin said:
AOKP build 32 is very stable for me if your looking to give ics another chance. Make sure you do all the proper wipes before flashing.
Click to expand...
Click to collapse
Ok, if you say so, I'll try it. It crossed my mind to give ICS the second chance but I didn't know exactly what rom to try. I supose I need to do a wipe cache from recovery mode and after this I have to use the option install from sd card? Am I right?
What ROM are you coming from before ics?
Sent from my glitched ICS Captivate using XDA App
jmtheiss said:
Grab an Odin or Heimdall one-click to get back to stock KK4, and flash that. Once you've flashed back to stock KK4, if you were using any custom rom (anything non-stock), flash that to your phone. (The idea is to be as close to your previous setup as you can be.)
Click to expand...
Click to collapse
Till now I used only Odin. I have this file on my pc: I897UCKK4_I897UCKK4_I897UCKK4_HOME.tar.md5. Is this ok to flash this with Odin in "pda" or "phone" section?
cmilldrummin said:
What ROM are you coming from before ics?
Sent from my glitched ICS Captivate using XDA App
Click to expand...
Click to collapse
I897UCKK4
erycx said:
Till now I used only Odin. I have this file on my pc: I897UCKK4_I897UCKK4_I897UCKK4_HOME.tar.md5. Is this ok to flash this with Odin in "pda" or "phone" section?
Click to expand...
Click to collapse
I'm not sure what that file is - it may be fine, but I don't want to say "flash away!" and leave you with a messed up phone.
I would suggest going here and grabbing the non-bootloader Odin one-click (assuming one-clicks have worked for you in the past). Flash that, and you should be good to go with KK4.
erycx said:
Till now I used only Odin. I have this file on my pc: I897UCKK4_I897UCKK4_I897UCKK4_HOME.tar.md5. Is this ok to flash this with Odin in "pda" or "phone" section?
Click to expand...
Click to collapse
that is safe to flash. that is the kk4 stock.
that is all i have to add to this discussion.