Database Develop

Complete Installation Guide for JB or ICS on a Nexus One (Updated 12/29/12)

I initially looked for a complete update guide on here and eventually found all the information I needed, but it was in multiple places and sometimes hard to find. After getting everything installed on my N1 I thought I would write a guide for other noobs like me that want to try out ICS or JB but would like a step-by-step guide. I hope that it is helpful. SpazeDog ROMs (both ICS and JB) are working wonderfully on my N1 - its a very nice update from CM7 with only minor issues so far.
Note: this was initially written specifically for SpazeDog roms, but as they have not been updated in a while I have provided links to other popular roms as well. If you would like to try a different ICS or JB rom this guide should work, just substitute with the appropriate rom and depending on the one you choose, you may also need to install Google apps.
If you looking at this guide and don't know the basics yet, check out the Newbie Friendly thread first.
Links to popular roms that will work using this guide:
Evervolv JB 4.2
Evervolv JB 4.1
CM 10, JB 4.1.2 by vijendrahs
CM 10, JB 4.2.1 by vijendrahs
Spazedog ICS/JB
Disclaimer: This guide involves making changes to your phone that potentially could brick your phone leaving it unusable. I am not liable for any changes you make or problems you may have with your phone. You should at least be familiar with entering commands using command prompt. This procedure will erase ALL the data on your phone. Make sure you have a backup of everything. A nandroid backup is highly recommended. Proceed at your own risk.
Before we get started make sure you have the following: a rooted Nexus One, a USB cable to attach your phone to a computer, and the Android SDK. If you are just now installing the Android SDK, open the SDK manager and make sure to install the "Tools" and in "Extras" the "Google USB Driver" are checked off and download them. Alternatively, you just download ADB and Fastboot (search this forum or google). If you have a Mac see this thread to get started with ADB and Fastboot.
If you Nexus One is NOT already rooted, then follow this guide from Cyanogenmod to root your phone. If you plan to use the adb commands below (they are optional) make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Step 1 - Download everything you will need:
4EXTRecovery Updater - the first link will download the .apk to your computer or phone.
BlackRose - go down to bottom of the first post to "Attached Files" and download the latest BlackRose zip file. If you don't want to do it yourself, check out this thread to flash a pre-made partition scheme. Often the developers (Evervolv) will also have a partition schemes that you can flash via Fastboot from your PC as well.
Your rom of choice - go to the downloads section and choose which rom you would like to try. Download the zip installation file.
Since you will be decreasing the size of your partition that apps can be stored on consider something like Mounts2SD or AD2SDX to move apps to your SD card.
Step 2 - Install and use 4EXTRecovery Updater on your phone:
The easiest thing to do is go to the 4ext link above, download and install it, directly from your nexus one. You can also install it by copying the APK file to your SD card, then using a file manager to find it and install it or you can use command prompt by opening command prompt, cd to the location of the Android SDK tools, and then type in the following command (replacing "path" with the path to where the APK is located on your computer):
Code:
adb install /path/4EXTRecoveryUpdater.apk
After you have installed 4ext open the 4EXT Recovery Updater. Tap "Settings" → "Allow" superuser request → "Yes" to connect to 4ext to get new data. Now select "Online install/upgrade" → "Yes" assuming it detects your nexus one correctly → select and install the latest 4ext recovery (at the top of the list).
After 4ext has installed, it will have placed a recovery image on your SD card - find it (its called recover.img) and it should be located in SD/Download/4EXT_Recovery_Touch/ folder. Copy this to your computer in case something goes wrong later and you need to re-flash the recovery image!
After installation of the 4ext recovery turn off your phone and boot into recovery by turning off your phone, turning it on again while holding the trackball down. This will boot into the bootloader, then press the power button once, use Volume Down to select "recovery" and press the trackball to select. Alternatively you can use the command prompt:
Code:
adb reboot recovery
Your phone should now boot into the 4ext recovery menu. Before moving on make sure you have any important stuff backed up because you are about to erase your entire SD card! Select "tools" →“partition sd card” → “remove all partitions and start from scratch.” Then for the 1st partition select “1024″ for a 1GB partition (this will be where ICS will be able to put your applications & data). Select "skip" for the 2nd partition and for the swap partition. Finally select the system “ext4″.
Step 3 - Copy the Evervolv, SpazeDog, or whatever zip installation file you have chosen to your phone's SD card
Download the ICS or JB zip file above and copy it to the root of your newly formatted SD card.
Step 4 - Installing and using BlackRose to resize the system partition:
Download the BlackRose application and install it on your computer. (Alternatively people have made flash-able partition schemes that you can just flash from your PC - usually links and instructions are provided in the installation rom's thread, Evervolv's here. If you do have access to a computer you can check out this thread).
Make sure your nexus one is attached via USB to your computer.
Open the BlackRose application - it will install and reboot your phone. Then follow along as shown in this video to resize your partitions for a JB ROM.
If you plan to install the ICS rom then use the video above as a guide but use the numbers (sizes) for the different partitions as indicated below.
After BlackRose has installed you will need to restart the application. After it has started up and recognized your device select "apply stock/custom blackrose" by typing in 1 and enter.
Then select "custom blackrose" by typing in 2.
Then type "resize" when prompted.
Now you will need to change the sizes of the system partition to 220 for ICS or 260 for JB.
Change the cache size to 8.
Finally name the new system partition, either "ICS" or "JB" depending on what you plan to install.
Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip.
Step 5 - Install JB or ICS:
Now turn your phone off and boot into recovery as you did in step 2.
4ext will load. Select "wipe/format" → "format all partitions (except sdcard)" and then also "wipe data/factory reset."
Now go back and select "install from sdcard" → "choose zip from sdcard" → and then select the ICS or JB zip you copied to the SD card in step 3.
Now either the ICS/JB installer will load or it will just install in one step. Just follow the prompts to install and enjoy.
Depending on the ROM you chose you may need to install Google apps (see the specific ROM thread for details) and will also likely want to flash an apps-to-SD script as mentioned above so you do not run out of space.
This method worked perfectly for me, hopefully it will work well for you as well. Enjoy.

Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!

diegolm said:
Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!
Click to expand...
Click to collapse
I am sorry to hear that. Can you boot into recovery or is that broken as well? If you can boot into ext recovery try selecting "wipe/restore" → "wipe data/factory reset" and then try to install BCM again. I probably should have added that above, I will do that now.
If your recovery is broken but you can get into the bootloader (holding down trackball while starting up), you should be ok. You will probably need to flash Amon_Ra's Recovery using Hboot as was described in the guide from cyanogenmod link above. If there is a way to directly hboot flash 4ext recovery I don't know how to do it. Then you can try installing BCM again from the Amon_Ra's recovery and re-install 4ext after you get everything working.

I tried the Texasice ROM and it worked, but I didn't like it! Later I tried again BCM and It worked! I dont know, maybe I did something wrong... Anyway thanks again for the guide!!

Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2

intel415 said:
Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I am not sure which part you are referring to, but, yes, a few of the above instructions could be replaced with fastboot commands.

The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2

intel415 said:
The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I used the adb commands above because you can use adb to reboot directly into recovery (fastboot you can only reboot normally or into the bootloader) and you can also use adb to directly install apk files - fastboot cannot do those two things - it is more for flashing images (recovery, roms, etc). In order for adb to work make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Note that adb commands are not required - you can reboot into recovery and install the 4ext manually.
It won't let me post a link right now, but just google "adb commands" to find a list of all the commands you can use.
Hope that helps.

Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2

intel415 said:
Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
Yeah, its not bad - glad you got it working! ICS has been smoother than cm 7.2 for me as well.
Blackrose didn't ask me about userdata - it just assumed that automatically after putting in 220 system and 16 cache... I'll make note of that in the guide so its clearer. Thanks.

Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.

Look for "recovery.img"
bobbyphoenix said:
Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.
Click to expand...
Click to collapse
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.

c2med said:
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.
Click to expand...
Click to collapse
OK I'm stuck on what the path name is suppose to be. I tried it every way I can think of. Can you take a look at my screen shot, and tell me where I'm going wrong? The recovery image is on my desktop, so I'm not sure what exactly I should be replacing "path" with. I tried it from the link, and how you have it in your note. You don't have the "/to/" after path as in the CM link.

Well I tried a couple more times, and I can get it to seemingly do it, but it just hangs on this: (see screen shot) I get no error, and if I try to enter recovery on the phone I still get the reboot to the android and triangle with the ! in it.

place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk

And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".

n1newbie said:
place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
tommert38 said:
And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".
Click to expand...
Click to collapse
WOW Thank you both. I spent literally hours yesterday trying to get it to work. Tried your suggestions, and in five minutes it was up and running!
---------- Post added at 12:31 PM ---------- Previous post was at 11:33 AM ----------
I may have spoke too soon. I followed the instructions to the end. Installed the ROM, and rebooted, but now after the X I get the Spazdog splash screen with the big Z in the middle and green dots moving, but it stays there forever. I waited 20 minutes one time. Tried reflashing, but I get the same thing.
---------- Post added at 01:17 PM ---------- Previous post was at 12:31 PM ----------
Just giving an update on progress (in case someone else is in my boat too) Flashed back to stock GB. Reinstalled recovery, and reflashed Spaz. Got past the X, and the splash screen, but now it's stuck on the Android logo that looks like the night rider beam that goes across the word. Been there now for about 10 minutes.

You do have Blackrose, right?

Yep. Installed everything according to OP. I think it may be the partition sizes as I think flashing back to GB messed with them. It says 220 and 10, but after checking some threads, it looks like there is one missing (userdata). I tried flashing a custom GB from here http://forum.xda-developers.com/showthread.php?t=1214543&page=98 and I was able to install everything. Got it up and running, so I'm going to start over for ICS, or do you think I can flash one of these for ICS http://forum.xda-developers.com/showthread.php?t=1637166 , and then just flash the ROM after?

220/10 means that you have 220MB for system and 10MB for cache, everything that's left will be userdata, so it doesn't ask (total is ~436MB, so userdata will be ~206MB in that case).
In HBOOT you can check how large your partitions are, or you could use the FreeSpace app for example. Always make sure your system partition is large enough before flashing a ROM.

Boot loop problem

Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.

A few questions:
spazlon said:
I tried installing a custom ROM on my 7310 and it had issues.
Click to expand...
Click to collapse
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop.
Click to expand...
Click to collapse
How far into the boot sequence does it get?
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Have you tried seeing what is causing the boot-loop using adb?
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Click to expand...
Click to collapse
This is an action of last resort. Exhaust all other avenues first.

boscorama said:
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
Click to expand...
Click to collapse
I used CWM to flash AOSP 4.1.2. It seemed to work fine for a day or two, but then it needed charging (as normal). I let it charge over night and in the morning it had less battery. I figured the charger or cable were flaky so I tried another set on another outlet and same thing. Then it finally ran out of battery. I let it charge again over night and when I tried to turn it on it was really slow. The boot animation was only 1 frame every couple seconds. It would eventually boot all the way up, but it was still REALLY slow. So I went into CWM and reflashed the same ROM. Then I got a boot loop of the boot animation. I couldn't get into CWM any more, so then I went into download mode and flashed the official firmware and flashed it with ODIN.
boscorama said:
How far into the boot sequence does it get?
Click to expand...
Click to collapse
Now when I turn it on it just says, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I can flash again with ODIN and it will get to the Samsung boot animation and just pulse SAMSUNG.
boscorama said:
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Click to expand...
Click to collapse
If I hold power and volume down I can get into download mode or Samsung recovery, not CWM, and power with volume up doesn't do anything.
boscorama said:
Have you tried seeing what is causing the boot-loop using adb?
Click to expand...
Click to collapse
I don't know anything about adb and I'm not sure what I would be looking for. Is there a tutorial I can follow somewhere?
Thanks for any help!

This worked for me with similar problem
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.

Thanks! I'll give this a try when I get home. I'll let you know how it works out.

Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jd1639 said:
Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Agreed - my procedure avoids manual repartitioning - I tried lots of other procedures but none worked. I think my data partition had become corrupt because I kept getting error messages. My first try was to recover with my cwm recovery file I made originally but I kept getting back to the boot loop .

spazlon said:
Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.
Click to expand...
Click to collapse
I always got something like that ...
After bootloop just go to recrovery mode then factory riset ... its 100% WORK
Sent from my GT-P7300 using xda premium

I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.

spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
Sorry - being a newbie myself I'm at a loss. It worked a charm for me.

spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
did a format /system before installing the custom roms? This is an important step.

prince93 said:
did a format /system before installing the custom roms? This is an important step.
Click to expand...
Click to collapse
This fixed it. Never had to do it with any of my other devices. CM10 loaded quickly after that. Loving how fast JB is!
Thanks!
Sent from my GT-P7310 using Tapatalk HD

It worked
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
WOw! This fixed my Tablet! thank you ever so much!!

mjramos15 said:
WOw! This fixed my Tablet! thank you ever so much!!
Click to expand...
Click to collapse
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
Gee thanks. This saved my tab. I'd almost given up on it and then voila.

How to Install 4.2 images, keep root and all data

**Disclaimer** If you don't understand what follows, don't attempt this. I'm not responsible for you softbricking your device,
This is a quick guide for how to install the new android without losing anything. You'll need fastboot for this. Also, before doing this, be sure to download the supersu cwm update zip, and have it on your sdcard. Make sure you also already have a custom recovery installed (I did twrp, but i'm sure cwm will work just as well). I would also suggest having a backup done, through titanium backup and through recovery, just incase.
First, download the factory images for the n7 from google's website. Decompress them (if you're in windows, you'll need winrar or something similar.) After you decompress the archive, there'll be another one inside (image-nakasi-jop40c.zip), decompress this one as well. Under here, you'll see the .img files for all the partitions. For now, go up one directory. You'll also see here bootloader-grouper-4.13.img. Once you have all this, reboot into the bootloader.
Once you're in the bootloader, you can update the bootloader to the new version (this step isn't needed, but I did it anyways). Plug into your pc, and type fastboot devices. Make sure it's not blank. If it is, you have to update drivers. If you can see the device, open up a command prompt, and cd to the directory that has the bootloader-grouper file. Type the following:
fastboot flash bootloader-grouper-4.13.img
then, after it's done, type:
fastboot reboot-bootloader
Now, you'll be booted back into the bootloader, it'll say 4.13. On to the rom.
cd into the folder image-nakasi-jop40c (make sure you see the files system.img and boot.img before you continue. If you don't see them, the next steps will do nothing but erase your kernel and system parition.)
now, you see the image files. Type the following (still in the bootloader)
fastboot erase system
fastboot flash system system.img
wait until it completes, then type:
fastboot erase boot
fastboot flash boot boot.img
Once this is done, hit the volume up on the device until it shows recovery mode on the top. When it does, push the power key and you'll boot into your recovery (shouldn't be touched.) Inside here, flash the supersu cwm zip file, which'll flash the superuser binary, and supersu. Once this is done, do a factory reset (removing your data and cache.) Boot into the rom.
Once it's booted, you'll notice your internal sd card appears to be empty (mine did, I was worried at first.) For some odd reason, it moved the entire contents of my sdcard into a folder on it called 0. When you get back into android, simply move the folder all up one level so they're in the proper place. You now have the rom booted, rooted, with all your data. Now, you can do a titanium restore to get all your stuff back.
My first boot got stuck for some reason. if it happens to you, just hold the power button and hard reboot. (I did this on 2 devices, it only happened to one of them, so I figured I'd give you all warning.)
Links:
SuperSu binary: https://docs.google.com/open?id=0B7a8xHNJlpgTR0ZkR1pWZWR2VzA
Google Factory Images: https://developers.google.com/android/nexus/images

Thanks for this.
I flashed the 4.2 ota in the dev section and I lost root. Can I just flash the supersu binary in cwm to regain root?

Thanks for this.. Apparently you found out too a clean 4.2 isn't rootable via typical methods.
That SuperSU package did the trick. I have to remember to keep a SuperSU binary on hand for these kinds of situations that SuperUser fails..

jefferson9 said:
Thanks for this.
I flashed the 4.2 ota in the dev section and I lost root. Can I just flash the supersu binary in cwm to regain root?
Click to expand...
Click to collapse
Yes. If you do it though cwm, you're not using any exploits, you're just inserting the superuser binary and supersu.apk into the proper places on the rom. On any nexus device, any rom, this will root it.

mstrk242 said:
Once it's booted, you'll notice your internal sd card appears to be empty (mine did, I was worried at first.) For some odd reason, it moved the entire contents of my sdcard into a folder on it called 0. When you get back into android, simply move the folder all up one level so they're in the proper place.
Click to expand...
Click to collapse
DANGER WILL ROBINSON!!
The "odd reason" is called "multiple users" - add a second user and they get a folder called 10.

tehSmoogs said:
DANGER WILL ROBINSON!!
The "odd reason" is called "multiple users" - add a second user and they get a folder called 10.
Click to expand...
Click to collapse
Exactly.
If everything goes right we should have an AOSP prerooted build in about *looks at watch* 20 minutes.... Unless there is a compile error or SU error. *laff*
Back to watching the scrolling terminal window

Just got this working on a mac...
did not update bootloader(couldnt get it to)
other than that, same commands except all fastboots are ./fastboot on a mac
the only other trick is i needed the fastboot and abd files in the jop40c folder...seems to have worked like a charm....im deff on 4.2 with su installed... and it looks like my data is still there...once google is done restoring i'll know just how sucessfull it is, but so far, seems to work!!!

kwhee07 said:
Just got this working on a mac...
did not update bootloader(couldnt get it to)
other than that, same commands except all fastboots are ./fastboot on a mac
the only other trick is i needed the fastboot and abd files in the jop40c folder...seems to have worked like a charm....im deff on 4.2 with su installed... and it looks like my data is still there...once google is done restoring i'll know just how sucessfull it is, but so far, seems to work!!!
Click to expand...
Click to collapse
I did this all on linux, just kind of adapted the guide for windows. I figured all the linux users would understand how to do it on their own. Glad to know it's the same for mac as well.

OK where did they put the developer options? Not in settings on my 32GB 4.2 device
Never mind. This: http://www.androidpolice.com/2012/1...hidden-in-android-4-2-heres-how-to-find-them/

rootbrain said:
OK where did they put the developer options? Not in settings on my 32GB 4.2 device
Never mind. This: http://www.androidpolice.com/2012/1...hidden-in-android-4-2-heres-how-to-find-them/
Click to expand...
Click to collapse
Settings - about tablet - build number
push it a few times and it will enable dev options

You have .bat file in the package.

Why so complicated?
I downloaded 4.2 from here:
http://android.clients.google.com/p...gned-nakasi-JOP40C-from-JZO54K.094f6629.zipia
I then just flashed it from recovery via CWM.
Done.
CWM asked me if I wanted to maintain root and of course I chose the correct answer on this, so now my N7 is running on a rooted 4.2.

Here is my method:
1. Download official 4.1.2 from http://forum.xda-developers.com/showthread.php?t=1929270 and 4.2 OTA image from http://forum.xda-developers.com/showthread.php?t=1989188
2. Boot into CWM (i have CWM touch installed)
3. Clear data and install 4.1.2, don't forget to turn on root in the installer
4. reboot check that root is fully working
5. reboot into recovery install 4.2
6. before reboot CWM will ask to disable recovery flash and protect root. Ansver yes to both questions

I'm confused, it says if you are already on a custom rom, just flash as usual.
What makes this different?

I was on stock ROM rooted with some system modifications, and this wwadd the only way I could get the update working...
Sent from my Nexus 7 using xda app-developers app

mstrk242 said:
For some odd reason, it moved the entire contents of my sdcard into a folder on it called 0. When you get back into android, simply move the folder all up one level so they're in the proper place. You now have the rom booted, rooted, with all your data. Now, you can do a titanium restore to get all your stuff back.
Click to expand...
Click to collapse
So I'm at the step listed above. I have 4.2 on my device but I can't seem to find this "0" folder. I'm browsing the /sdcard folder via adb shell. Am I looking at the wrong place? Do I have have the incorrect permissions? Or might it not be there?
Thanks.

Ill have to wait until a rooted rom is created, I have no comp.
Sent from my Nexus 7 using XDA Premium HD app

can I install image-nakasi-jop40c.zip directly without upgrading bootloader?

Zuk. said:
So I'm at the step listed above. I have 4.2 on my device but I can't seem to find this "0" folder. I'm browsing the /sdcard folder via adb shell. Am I looking at the wrong place? Do I have have the incorrect permissions? Or might it not be there?
Thanks.
Click to expand...
Click to collapse
Not advisable to move this folder - if it got moved to a new location by the o/s then there's probably a good reason why - maybe like 4.2 introducing multiple users
Each user appears to get their own "home" directory created in /mnt/shell/emulated/
Default user dir is "0"
Second user dir is "10"
Each contain the standard dir's from 4.1 and earlier.

Travelawyer said:
Why so complicated?
I downloaded 4.2 from here:
http://android.clients.google.com/p...signed-nakasi-JOP40C-from-JZO54K.094f6629.zip
I then just flashed it from recovery via CWM.
Done.
CWM asked me if I wanted to maintain root and of course I chose the correct answer on this, so now my N7 is running on a rooted 4.2.
Click to expand...
Click to collapse
You had two extra characters at the end of your link, but I fixed it above and it's good to go for others in the future. Just flashed it in TWRP, it didn't ask if I wanted to maintain root, hit reboot when it was complete and lost root, so it doesn't work for everyone - good news is that all my data remained intact without having to resort to advanced restoring my data from a backup....
When I tried the SuperSU binary root flash trick, I finally got root back. But don't think it's as easy to get to recovery! I had to obtain the TWRP Recovery one more time since it wiped it and put in place a recovery that did absolutely nothing but reboot the device after a few minutes, so you'll have to
Code:
fastboot flash recovery openrecovery-twrp-2.3.1.1-grouper.img
to get TWRP back.... Hope that helped everyone!

[RECOVERY] Official ClockworkMod Recovery 6.0.4.7

[UPDATE 8/27/2013:] GS4 GPe (I9505G/jgedlte) is now officially supported by the ClockworkMod team as of version 6.0.3.6. You can use the I9505/jfltexx recovery on both International and Google Play edition variants.
Download at the official page here, scroll down to "Samsung Galaxy S4 (i9505)". Both regular and touch versions are available.
Flash it via Heimdall:
Download the latest version of Heimdall from here and extract the ZIP to a folder on your hard drive (e.g. C:\Heimdall\ )
Download and install Microsoft Visual C++ 2012 redistributables package from here. These are required to have Heimdall work properly.
Download the latest recovery .IMG file for the I9505 from here and save it to the Heimdall folder.
Shut down your phone. This is important! Do not simply "Reboot to Bootloader" from a ROM or via ADB; the phone needs to boot to Download mode from the "off" state. Disconnect the phone from USB, and turn it on by holding Home + Volume Down + Power buttons together. This will start the phone in the Download mode. Connect the phone to your computer via USB.
Run zadig.exe included in the "Drivers" subdirectory of Heimdall installation. From the menu chose Options -> List All Devices. From the USB Device list chose "Samsung USB Composite Device", or "MSM..." - basically the SGS4. Press "Install Driver", click "Yes" to the prompt and if you receive a message about being unable to verify the publisher of the driver click "Install this driver software anyway". Your phone should now be recognized by Heimdall.
Open Windows Command Prompt and navigate to the directory where you extracted Heimdall. Now type in the following command:
Code:
heimdall flash --RECOVERY recovery_file_name_here.img --no-reboot
and press Enter. This will flash the recovery. Disconnect the USB cable, and hold the Power button until the phone vibrates. Now hold Home + Volume Up + Power to boot into ClockworkMod recovery.
Known issue: On CM 10.2 and 11 ROMs sometimes while rebooting, the phone gets stuck on the Google logo for a long time. This seems to be a race condition (likely culprit is recently merged SELinux, but not confirmed.) Sometimes it clears up on its own after waiting for several minutes, but usually a reboot via battery pull (or holding Power for 10 seconds) clears is right up. Alternatively, removing and immediately re-inserting the SD Card will work as well.
[Insert generic CYA here.]
Flash and use at your own risk.
All thanks go to ClockworkMod team and @gweedo767 in particular.

Chahk said:
This is the unofficial beta of the ClockworkMod recovery built specifically for I9505G/jgedlte/S4 GPe, built by @gweedo767.
Flash it via Heimdall:
Download the latest version of Heimdall from here and extract the ZIP to a folder on your hard drive (e.g. C:\Heimdall\ )
Download and install Microsoft Visual C++ 2012 redistributables package from here. These are required to have Heimdall work properly.
Download the attached .IMG file and save it to the Heimdall folder.
Shut down your phone, disconnect it from USB, and turn it on by holding Home + Volume Down + Power buttons together. This will start the phone in the Download mode. Connect the phone to your computer via USB.
Run zadig.exe included in the "Drivers" subdirectory of Heimdall installation. From the menu chose Options -> List All Devices. From the USB Device list chose "Samsung USB Composite Device", or "MSM..." - basically the SGS4. Press "Install Driver", click "Yes" to the prompt and if you receive a message about being unable to verify the publisher of the driver click "Install this driver software anyway". Your phone should now be recognized by Heimdall.
Open Windows Command Prompt and navigate to the directory where you extracted Heimdall. Now type in the following command:
Code:
heimdall flash --RECOVERY beta-recovery-clockwork-6.0.3.5-jgedlte.img --no-reboot
and press Enter. This will flash the recovery. Disconnect the USB cable, and hold the Power button until the phone vibrates. Now hold Home + Volume Up + Power to boot into ClockworkMod recovery.
So far I've tested mounting all partitions, formatting and wiping, backup and restore to both internal storage and external SD Card, flashing ROMs. Everything seems to be working.
[insert generic CYA here.]
Test it at your own risk, and report any issues here or on IRC in #koush at irc.freenode.net
All thanks go to ClockworkMod team and @gweedo767 in particular.
Click to expand...
Click to collapse
Nice! I tried to build a touch recovery one -- it just rebooted constantly when I tried to enter recovery.

tublah said:
Nice! I tried to build a touch recovery one -- it just rebooted constantly when I tried to enter recovery.
Click to expand...
Click to collapse
This one isn't touch enabled. If all goes well, gweedo767 will be releasing this officially some time today.

Thanks Chahk
Sent from my GT-I9505G using Tapatalk 2

Okay fairly new to the Rom scene but what is the difference between TWRP and ClockworkMod? I know that TWRP is touch based is that the only difference? I know in one of the CM10.2 threads they keep telling people to use CWM recovery and not the other ones.
Sorry for the stupid question but I am curious.

ChaoticUnreality said:
Okay fairly new to the Rom scene but what is the difference between TWRP and ClockworkMod? I know that TWRP is touch based is that the only difference? I know in one of the CM10.2 threads they keep telling people to use CWM recovery and not the other ones.
Click to expand...
Click to collapse
Just like custom ROMs, custom recovery images are just different ways to do the same thing. One is not necessarily better than the other, it's just pure personal preference. Other threads are urging people to use official recoveries, as opposed to those modified and built by random forum members. It doesn't necessarily mean CWM only, it just means the official versions will have a better chance of being more stable and having less issues.
FYI, there are touch-enabled versions of CWM also: http://www.clockworkmod.com/rommanager

ODIN-flashable TAR
Here is an ODIN-flashable TAR of this recovery (the beta)
https://www.box.com/s/1026fqbf49sthkd2rfv5

Any idea when this will be released in ROM manager? Iv been using the beta with no issues.
Sent from my GT-I9505G using xda premium

How is clockwork mod compare to TWRP. When I use TWRP it freezes sometime
Google Edition S4

CWM and TWRP both work well. One feature I like that TWRP has that CWM does not is the ability to queue multiple zips for flashing all at once. On the flip side being able to use hardware buttons to navigate in CWM is handy on the rare occasion when the touchscreen is on the fritz.

I booted from this version of CWM via fastboot with the command
fastboot boot beta-recovery-clockwork-6.0.3.5-jgedlte.img
and successfully completed a back-up to internal flash, though I haven't tried restoring from the back-up. I then rebooted the phone, choosing not to have CWM overwrite anything on the phone, in order to keep stock recovery in place.
The only odd thing I've noticed is that the back-up file dates are set to January 6, 1970, with the back-up directory being named
1970-01-06.14.02.54

Latest recovery for I9505 (jfltexx) is now also fully compatible with I9505G/jgedlte. Download it at the official page here.

Chahk said:
Latest recovery for I9505 (jfltexx) is now also fully compatible with I9505G/jgedlte. Download it at the official page here.
Click to expand...
Click to collapse
Sweet! Touch as well?
Sent from my GT-I9505G using xda app-developers app

tublah said:
Sweet! Touch as well?
Click to expand...
Click to collapse
Yep. Both regular and touch-enabled 6.0.3.6 recoveries for I9505 work on I9505G.

Chahk said:
Latest recovery for I9505 (jfltexx) is now also fully compatible with I9505G/jgedlte. Download it at the official page here.
Click to expand...
Click to collapse
Thanks for the heads-up on this. It's working great for me, with one exception. I can't mount or back up to my FAT32-formatted 64GB microSD card. According to what I've found via searching the forums, this is supported, at least for the I9505. Anyone else seeing a similar issue when using 6.0.3.6 with the I9505G?

highvista said:
Thanks for the heads-up on this. It's working great for me, with one exception. I can't mount or back up to my FAT32-formatted 64GB microSD card. According to what I've found via searching the forums, this is supported, at least for the I9505. Anyone else seeing a similar issue when using 6.0.3.6 with the I9505G?
Click to expand...
Click to collapse
For me, it's working fine. I have a Sandisk 64G formatted to FAT32 and did a successful backup. It's not as fast as TWRP but I can live with that.
When dialog fails, it's time for violence.

bleez99 said:
For me, it's working fine. I have a Sandisk 64G formatted to FAT32 and did a successful backup. It's not as fast as TWRP but I can live with that.
Click to expand...
Click to collapse
Thanks for the feedback. I've got it working, as well. I was trying to avoid using Heimdall to flash the recovery to my phone and was doing a fastboot into recovery instead. It looks like you can't backup to external using that process. I used Heimdall to do the flash and now the backup to external works.

I did a fastboot boot recovery-clockwork-touch-6.0.3.6-jfltexx.img and was able to do a backup and a create image zip. I could not do this to the external SD card. Got an error on the bottom No file_contexts. I'm ok with that at least I got backup up.
My question is where are these backups stored? In CWM going to the "advance restore" option I see that it was created /sdcard/clockworkmod/backup "1970 etc etc", however using ES file Explorer and Total Commander there are only 3 files in the /sdcard/clockworkdmod/backup folder. .nomedia 0.00 B, .recovery_version 40.00 B and .settings 285 B.
I've also used root browser can can't seem to find where these backups are stored.
Where are these files store so I can copy them to my computer for safe keeping?
Thanks.
Ok, found 'em.... /data/media/clockworkmod directory contains all the info!

ThugEsquire said:
Here is an ODIN-flashable TAR of this recovery (the beta)
https://www.box.com/s/1026fqbf49sthkd2rfv5
Click to expand...
Click to collapse
By any chance do u have the new cmw Odin flashable tar file
Sent from my GT-I9505G using xda app-developers app

toanau said:
By any chance do u have the new cmw Odin flashable tar file
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
6.0.3.6 is the latest and there is an Odin tar in this thread. Is there a newer one floating around I didn't see anything updated from the website?
Update I think that image was for 6.0.3.5 if so let me know I can make you a .tar file
Sent from my GT-I9505G using Tapatalk 2

How to Root Android 5.0 (LRX21O) for Nexus 5

Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
_______________________________________________________________________________
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...

Thank you for posting this. I tried three other methods to get root back before this, and none of them worked. This one did the trick without any problems at all. Thanks again!

Wug's Nexus Root Toolkit 1.9.4

kyoshiro22 said:
Wug's Nexus Root Toolkit 1.9.4
Click to expand...
Click to collapse
I know there's Toolkit's out there, but this is for those who choose to take the "Fastboot" approach.

gestevez1213 said:
Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP[ - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...
Click to expand...
Click to collapse
This is NOT working.... I tried it 3 times on 2 devices

papayayoghurt said:
This is NOT working.... I tried it 3 times on 2 devices
Click to expand...
Click to collapse
What part are you stuck at?

For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.

I used chainfires auto root for the N5 (stock lollipop Boot loader). Worked great. Just download to a PC put phone into boot loader and run the bat file. I can't link but a quick google will find it for you.
Sent from my Nexus 5 using Tapatalk

andrelessa said:
For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.
Click to expand...
Click to collapse
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?

Personally, I'm using the autoroot from chainfire. Works like a charm, no custom recovery is needed (I have the stock recovery).

gestevez1213 said:
What part are you stuck at?
Click to expand...
Click to collapse
Everything is working, but then SuperSU can´t find a Binary.

gestevez1213 said:
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?
Click to expand...
Click to collapse
Yes, I read somewhere that TWRP need this...

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Are you running the official lollipop release? It should work with that. Delete the app, and try again.

Just put your phone in bootloader and run cf-autoroot from windows if you dont want twrp.

I have twrp but its not working like that

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Had the same issue and needed to flash the updated kernel from chainfire : https://www.androidfilehost.com/?fid=95747613655047375

Why are you trying to do this the hard way? Just use chainfire's autoroot.
It works perfect and it's literally one command
fastboot boot CHautoroot.img (or whatever the file name is)

cf-auto-root is the way
I agree, just use cf-auto-root. You should be good to go in no time.
Just for FYI, if you already have unlocked bootloader, it won't wipe your data, if you are concerned.
CF-auto-root roots N5 without modifying your kernel. I believe, if you flash the SuperSU in TWRP, it would modify the kernel. It's nothing bad, but if you want to remain "stock" and don't want to reflash stock ROM later to get the OTA, just use "Full unroot" from SuperSU app and you are stock and ready for next OTA.

I have encrypted the storage on my Nexus 5. Will CF-Auto-Root wipe my storage?

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
I have the same error.