[Help] Not booting phone, colored screen - Captivate Q&A, Help & Troubleshooting

I have tried lately to flash ics rom on my rooted captivate which was running 2.2 stock froyo but I made two mistakes that made me fear that it was bricked
- I removed the CWM recovery folder from the internal sd card. As a result, when I reboot the phone, it starts as usual but get stucked in the Samsung galaxy S screen.
- Trying to fix that, I tried to install a custom recovery image using Heimdall suite and with the download mode, but after flashing it, the situation worsened (may be because it was destinated to android 2.3.) and when I rebooted the phone, I get tha At&t logo and then the screen becomes an assembly of colored lines.
The only good news is that I still can access the download mode. I did nothing else to not complicate the situation.
So do you think the phone is hard bricked now? And is there a solution to relieve it? Thank you in advance

medcast said:
I have tried lately to flash ics rom on my rooted captivate which was running 2.2 stock froyo but I made two mistakes that made me fear that it was bricked
- I removed the CWM recovery folder from the internal sd card. As a result, when I reboot the phone, it starts as usual but get stucked in the Samsung galaxy S screen.
- Trying to fix that, I tried to install a custom recovery image using Heimdall suite and with the download mode, but after flashing it, the situation worsened (may be because it was destinated to android 2.3.) and when I rebooted the phone, I get tha At&t logo and then the screen becomes an assembly of colored lines.
The only good news is that I still can access the download mode. I did nothing else to not complicate the situation.
So do you think the phone is hard bricked now? And is there a solution to relieve it? Thank you in advance
Click to expand...
Click to collapse
Basically, you get that screen cause you don't have the right bootloaders. Get stock KK4 with Odin (or Heimdall) one click. You'll find the sticky in the Dev section.
From there, you can flash Corn kernel to get root and after flash w/e ROM you'd like to run.

BWolf56 said:
Basically, you get that screen cause you don't have the right bootloaders. Get stock KK4 with Odin (or Heimdall) one click. You'll find the sticky in the Dev section.
From there, you can flash Corn kernel to get root and after flash w/e ROM you'd like to run.
Click to expand...
Click to collapse
I am sorry I was on travel the last two days
So, is this the thread that I need "[GB][2.3.5][KK4] Heimdall One Click Stock w/ or w/out BL's"? I am having some doubts because my original rom is a 2.2 stock rom. If not, could you please guide me to the right one?

medcast said:
I am sorry I was on travel the last two days
So, is this the thread that I need "[GB][2.3.5][KK4] Heimdall One Click Stock w/ or w/out BL's"? I am having some doubts because my original rom is a 2.2 stock rom. If not, could you please guide me to the right one?
Click to expand...
Click to collapse
Yes, that's what you need. You don't have the right BLs to run the ROM you flashed so you'll need to flash them (KK4 with BLs).
Sent from my SGH-I897 using xda app-developers app

Related

[Solved] Recovery 5.0.2.6 samurai..........

Ive got a stock 2.2? froyo captivate and did the new [Guide] How To flash Captivate ROMs from Stock by TRusselo and when i go into recovery i cant access external sd. I put the latest nightly and gapps on the root of sd card and for some reason I cant see it? I did a clean wipe and everything. Is there something wrong that I'm doing. I've mounted everything and still nothing.
Read the instructions again INTERNAL SD not EXTERNAL and you can access it, browse sdcard to /external_sd folder, it takes you to your external sd.
you mounted what? why? dont.
BUT YOU CANT FLASH FROM EXTERNAL SD!!!!
thats why the instructions say INTERAL SD
So instead of downloading through the browser.....I'd like to move the new nightly and gapps on internal memory with a pc transfer....where would i put it in? so that CWM can see it? Thxs man. I appreciate it. noober here. htc aria was a breeze to root and flash custom roms, I'm not use to this puppy.
ANYWHERE internal sd in the root, or any folder (except external_sd)
what browser are you using? the stock brower downloads to sdcard/downloads not sdcard/external_sd/*whatever*
if you downloaded with stock browser it should be there... not in root. unless you moved it after.
Thanks so much..... I found the files I needed but when I try to flash nightly it gives me this craziness....what's going on! Thxs for the help though.
edit: Did a factory one click by odin.
seems like an error with the zip file. try a nightly from a day or two before.
The build prop doesn't match the built asserts in the Zip, they have to match for it to flash... what ROM are you currently on?
Sent from my I897 using xda premium
that would make scene by the error. hmm he said he went to stock odin one click...
which odin one click?
Maybe he just did that...
Sent from my I897 using xda premium
So I did the one click to revert back to stock. Then I did a one click root and now have SU. 10 hours later and a freakin home made jig that I've made i'm still on 2.1 with root. Please for the love of God I'd like to install current nightly of cm7 and CWM. There are soooooo many ways I've read to install. Now from you pro's can you hook me up with some links or direction to get this going. I've literally killed my Saturday reading my a$$ off. Thanks guys for replying to my lame noobness.
tommyguns818 said:
So I did the one click to revert back to stock. Then I did a one click root and now have SU. 10 hours later and a freakin home made jig that I've made i'm still on 2.1 with root. Please for the love of God I'd like to install current nightly of cm7 and CWM. There are soooooo many ways I've read to install. Now from you pro's can you hook me up with some links or direction to get this going. I've literally killed my Saturday reading my a$$ off. Thanks guys for replying to my lame noobness.
Click to expand...
Click to collapse
Just clear ROM managers data and then flash the original Captivate CWM not MTD and the reboot into recovery... reinstall packages 2 times, and flash in CWM
Sent from my I897 using xda premium
Thanks for the fast reply. I bought ROM manager premium and will try it out. Install twice I guess to be on the safe side right? Thanks again. My wife hates my life right now being i've spent all day doing this. So i'm down to try anything on her cappy at this point.
Not "to be on the safe side"...the first time you choose reinstall packages in stock recovery it'll boot back into stock recovery, then reinstall packages again and it'll boot into cwm.
yeah thats a must do.
So i've cleared cache and selecting captivate recovery galaxy s 2.5.1.x booted into recovery ROM manger and did reinstall twice and got this.......I don't understand why i'm getting this.
Edit: I got it to work! I kept trying to go through the recovery from ROM manager after installing and it hung up a couple times. Then when selecting install packages with which I did it twice...it was in cwm 2.5.1.7. Installed nightly after full wipe a couple times and it boot looped. Then if I remember correctly I pulled battery booting into recovery, the 3 button way. it booted into Cwm 5.x.x.x. What the heck!!! That was a fun ride, why did it do this? Anyways, glad to join your guys community. you guys are awesome. Thanks buttons hit. changing first post and thread to.....solved.
When you flashed the nightly it contained a kernel with cwm 5 baked into it.
from what i have heard sometimes the cm install needs to be done twice.. too. i dunno dont mess with cm7
Sorry
Hello Guys, Just Found this thread after messing up with my Galaxy S Captivate :| I Unintentionally copied my rom in EXTERNAL SD card and Proceeded further but when I got in Download mode I can't Locate my Rom Zip and I tried Everything as mentioned such as wipe & etc... but Now My Phone is Stuck on Samsung Screen and Can't go through that screen! Is there anyway I can move back to stock rom and then update with new Hellybean!
thanks in Advance!
ShahX said:
Hello Guys, Just Found this thread after messing up with my Galaxy S Captivate :| I Unintentionally copied my rom in EXTERNAL SD card and Proceeded further but when I got in Download mode I can't Locate my Rom Zip and I tried Everything as mentioned such as wipe & etc... but Now My Phone is Stuck on Samsung Screen and Can't go through that screen! Is there anyway I can move back to stock rom and then update with new Hellybean!
thanks in Advance!
Click to expand...
Click to collapse
Go in the Dev section (stickies) and get Odin KK4 without bootloaders. Flash it in download mode.
From there, Get Corn kernel, which you'll flash with Odin 1.85 and finally, you can get back to your ROM.
BWolf56 said:
Go in the Dev section (stickies) and get Odin KK4 without bootloaders. Flash it in download mode.
From there, Get Corn kernel, which you'll flash with Odin 1.85 and finally, you can get back to your ROM.
Click to expand...
Click to collapse
Thankyou Soo Much For your Reply Bro, But Can you please guide me in detail like what Exactly Should I do with My Phone, I can Use my phone its wont let me boot into menu I just stuck on Samsung logo, and As TRusselo Guided in his tutorial I have to put any ROM.Zip into INTERNAL SDCARD (Phone Memory) and I can't do that until my phone boot's up properly! right? so Can you please help me out like what Should I do to get it working and THEN trying again to Update it with Hellybean
Once Again thankyou for your kind Reply!

[Q] I've bricked my phone- HELP! :C

okay so I thought bricking android would be complicated but as it turns out it's quite simple.
Please cut me some slack because I am a n00b at all this. I am already googling for a solution and looking on forums but I haven't found anything YET so after a desperate hour of googling I thought of posting here (I will keep on trying to find a solution though).
Here is what I did:
A long while ago I rooted my Galaxy S. Rom was ClockworkMod (recovery says ClockworkMod Recovery v3.0.0.5) and the kernel was Talon. No problem with this.
Now I wanted to do a factory reset so I dialed that number yo need for a factory reset. I got a red text message warning me NOT to touch any button and it would reboot. The phone rebooted and I think I got into the recovery mode.
The icon was a top cat in an orange circle with an arrow. I guess that's part of the Talon kernel.
Anyways on recovery mode screen I saw an option called "wipe/factory reset" I've selected it - I was told it can't be undone- I've said OK- It said everything went fine so I selected reboot.
Now the phone won't reboot. It is stuck in a loop. It will always try to reboot.
So all I see is a GALAXY S i9000 screen followed by a Talos screen with a loading bar followed by the GALAXY S i9000 screen again and it will just loop.
No idea what to do :C
help, please! thanks a million everyone!
Try flash the talon kernel again or if u got a rom on your SD card flash that.
If this doesn't work.search for ezbase 3.0 and follow instructions on how to flash a rom with ODIN.
U can also find ezbase on "insanity rom" thread in the op(1 of the links)
And now your phone is recovered
zodiaxe66 said:
Try flash the talon kernel again or if u got a rom on your SD card flash that.
If this doesn't work.search for ezbase 3.0 and follow instructions on how to flash a rom with ODIN.
U can also find ezbase on "insanity rom" thread in the op(1 of the links)
And now your phone is recovered
Click to expand...
Click to collapse
well I've tried to put an update.zip on the internal storage of the phone because I don't have an external SD card.
I mounted the phone as mass storage device in the recovery mode but my win xp 32 bit would say it is a Samsung Galaxy S but there was an error with the new hard ware and it couldn't be mounted fff
so no idea what to do now?
This is normal, you delated youre whole System. First of all dont panik you able to enter ist downloadmode ? If so, than you'll bei able to install a new rom and you will be able to boot I'm also New here had the same problem with my phone. This is called a soft-brick. I was able to go in DM and flash a new rom with my galaxy s plus
Sent from my GT-I9001 using XDA
Diablob555 said:
This is normal, you delated youre whole System. First of all dont panik you able to enter ist downloadmode ? If so, than you'll bei able to install a new rom and you will be able to boot I'm also New here had the same problem with my phone. This is called a soft-brick. I was able to go in DM and flash a new rom with my galaxy s plus
Sent from my GT-I9001 using XDA
Click to expand...
Click to collapse
vielen lieben dank
yeh i guess i did a soft brick. So what exactly do I do now?
I have managed to copy an update.zip file I've found on my computer to the phone but the download mode gives me an error and says it can't install it.
Can you link me to the files I need to install on it with the help of the download mode? Thanks a lot
so I have already tried installing different roms which seemed to have worked fine
I have tried just any random rom (Simplicity) I could find on this forum. It installed but I am still stuck in a boot loop. I don't see the Talon graphic anymore but the Galaxy S animation but I am still stuck in a loop.
help :C
zodiaxe66 said:
If this doesn't work.search for ezbase 3.0 and follow instructions on how to flash a rom with ODIN.
U can also find ezbase on "insanity rom" thread in the op(1 of the links)
And now your phone is recovered
Click to expand...
Click to collapse
http://www.theandroidsoul.com/ezbase-rom-v3-0-full-installation-guide-w-video/
is what ive found when googling. of course ALL THE FILES are offline again. what a surprise.
really a shame. this looked so promising :C
i've flashed a different ROM in the mean time but it doesn't let me flash anything else anymore. that recovery mode is awful so i can only suggest no one uses simplicity rom
You need to flash a new firmware using odin, partition with 512 pit. Check this link for instructions and firmware. http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my GT-I9000 using xda premium

[Q] weird bug. need expert advice + solution

Today I tried to update my phone to a new custom rom.
I followed the instructions of the threads and tried to get it to work.
Of course it didn't work or else I wouldn't be here right now asking for help.
Here's the current situation.
I am able to boot into download mode + recovery mode and also boot into cwmr and install a different kernel.
I used pc odin to install it each time and it does pass and the rom (i've tried installing a gingerbread rom so that I can try everything again) does install.
the problem is that it is currently stuck in a boot loop at the "Samsung galaxy note gt-N7000" screen.
I have looked up dr.ketan's posts and tried some too.
currently i am booting abyss note kernel 42cwt touch original. (I know for sure it is a workable kernel because I've been using it this whole time.
here's what i've done. please tell me what i've done wrong and the possible ways to reverse it.
1. backed up everything
2. went into recovery
3. factory reset/cache clear
4. use pc odin to install new kernel (since I was looking into switching to another kernel anyways)
5. use pc odin again to install gingerbread rom (I do get the green light saying it did get installed
6. phone auto reboots
7. it gets stuck at the boot loop like i have mentioned above
i will try to attach a few pictures of my note as soon as I can so you can see what's going on with it.
What rom is there on the phone now ? if you boot into recovery .. what recovery do you get now ? CWM or stock ardroid 3e recovery ?
nokiamodeln91 said:
What rom is there on the phone now ? if you boot into recovery .. what recovery do you get now ? CWM or stock ardroid 3e recovery ?
Click to expand...
Click to collapse
Right now it reboots to 3e recovery.
The rom that I tried to inject to it is currently a the stock gingerbread rom from dr. Ketans thread.
The rom that I had on it is the official ics rom for the hk region.
The rom that I wanted to inject to it was a custom jb rom that uses hydracore as a kernel.
Thanks!!
try installing a prerooted Gb rom or an ICS stock rom using PC odin.. if you choose ICS, after flash install a safe kernel..
nokiamodeln91 said:
try installing a prerooted Gb rom or an ICS stock rom using PC odin.. if you choose ICS, after flash install a safe kernel..
Click to expand...
Click to collapse
If I do a stock ics update can I just do it through kies or do I have to do it through pc odin? Also. Would abyss or hydracore considered as a safe kernel???
yes if kies can do it then good but at this situation i dont think. its better to use PC odin for now. yes both are safe kernels
nokiamodeln91 said:
yes if kies can do it then good but at this situation i dont think. its better to use PC odin for now. yes both are safe kernels
Click to expand...
Click to collapse
I've tried your suggestions...and it didn't seem to work out too well.
I am able to flash to different kernels and get in and out of different recovers and such, but ya...still no luck with running a rom.
Well I am not sure but I soft bricked my phone when I tried that Abyss Kernel. In my view Hydracore is safe. Philz is super safe.
Flash ICS which matches your region using Odin. If phone boots flash Philz, If not, then be ready to read a lot of stuff or get phone repaired.
asian_boi said:
I've tried your suggestions...and it didn't seem to work out too well.
I am able to flash to different kernels and get in and out of different recovers and such, but ya...still no luck with running a rom.
Click to expand...
Click to collapse
instead of flashing kernels. flash a complete rom using PC odin.
nokiamodeln91 said:
instead of flashing kernels. flash a complete rom using PC odin.
Click to expand...
Click to collapse
You have so much patience
Sent from my Amazon Kindle Fire using Tapatalk 2
the only thing i have...
Hey guys. my note seems to have cooperated and allowed me to flash a new rom and also a new kernel. Here's the catch though, now it's stuck in the samsung logo and won't boot beyond that. Any suggestions of what to do? I am continually searching on the forums to find a solution.
At least I'm happy to know it's not a brick that can't be fixed.
Thanks nokiamodeIn91 for your help so far. I really appreciate it.
which rom did you flash and which kernel? how?
He spent a lot of time helping you. Be sure to hit thanks button
Sent from my GT-N7000 using Tapatalk 2
I currently flashed the abyss note kernel 42 cw touch and I downloaded an old gb rom from sammobile .
Here's what I did.
1. Put my phone into download mode
2. Run as admin on PC Odin
3. Selected the Abyss kernel then flashed it.
4. Boot into the cmw, wiped cache then booted the phone into download mode again.
5. Then I installed the old GB Rom on to my phone and restarted it.
6. Phone starts, loads past the GT-N7000 logo and goes into the samsung boot logo.
7. Phone repeats the animation of the samsung logo a time or two then restarts on its own. This loops until the phone is completely drained. I know that the rom works because that was the rom that I used to root my phone. I definitely don't mind downloading another rom if I have to.
my current goal, if we can fix this, is to quickly just update to the official jb rom for n7000 and not play around with the rooting and such until I have even more time to learn more.
at least I know for sure my phone isn't hardbricked, I would imagine I have either missed a step or something that caused the problem.
I have read through the forum and I did come across one post talking about checking my phone's partition and such.
I got to be honest, I'm really not technically skilled enough at this point in time to dare to mess around with that type of thing yet especially with so much coding to make sense of it. (I know this is kind of dumb to say especially when I rooted my phone and screwed up this bad). More importantly, I don't even know for sure if I need to do a partition or not.
Please let me know what I did wrong and how I can fix it.
I got a question though (out of curiosity), how come there's no toolkit for the n7000 like the S3 and also the note 2???
this is the name of the old gb rom that I tried flashing.
N7000ZSKJ6_N7000OZSKJ6_N7000XXKJ6_HOME.tar
I actually have tried several other roms as well (from GB-JB, official and custom) and all of them so far has gotten to the samsung boot logo
I have read on the forums to try using Philz-cwm 6 kernel but I don't know if it'd solve my problem.
let me show you one of the threads I have read, if I dived into the wrong material let me know and I won't consider using it (or learn how to use it) for my current situation
http://forum.xda-developers.com/showthread.php?t=1661590&highlight=samsung+logo+bootloop&page=2
like I was saying before, I really have no experience in coding so all the things that really made near no sense to me. I understand the basic concept of what its trying to do it's just seems like a very unsafe method for me to try especially when I lack the necessary knowledge in this area of expertise.
did you flash the GB rom using the standard PIT file ?
also you could try with the 5 file flashing method from this thread
http://forum.xda-developers.com/showthread.php?t=1530501
Hello..
Why are you only wiping cache.
You should have done a factory reset on that step.
Sent from my GT-N7000000000 using Tapastalker 2
asf58967 said:
Hello..
Why are you only wiping cache.
You should have done a factory reset on that step.
Sent from my GT-N7000000000 using Tapastalker 2
Click to expand...
Click to collapse
Yeah true... should also format system..
**** if you can boot into recovery , do a facotry wipe now

boot loop

got a boot loop from trying to restore to stock, i came from cm 10.1 and i backed up cm 10.1 first then tried to restore but it decided to boot loop. it just stays at i897 screen, i am able to get into download mode, (haven't seen if odin recognizes it yet.) but no recovery at least i dont think, might be doing button combos wrong. i have only used odin a few times so i wouldnt know how to get back to stock, any help please?
Trozzul said:
got a boot loop from trying to restore to stock, i came from cm 10.1 and i backed up cm 10.1 first then tried to restore but it decided to boot loop. it just stays at i897 screen, i am able to get into download mode, (haven't seen if odin recognizes it yet.) but no recovery at least i dont think, might be doing button combos wrong. i have only used odin a few times so i wouldnt know how to get back to stock, any help please?
Click to expand...
Click to collapse
Get odin KK4 without bootloaders and flash it in download mode. From there, make it sure it boots up and flash korn kernel wih Odin 1.87 (or 1.85). From there, you're free to flash any ROM you want.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Get odin KK4 without bootloaders and flash it in download mode. From there, make it sure it boots up and flash korn kernel wih Odin 1.87 (or 1.85). From there, you're free to flash any ROM you want.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
uh what lol? when i rooted it i followed a guide that made me update to stock gingerbread and get gingerbread bootloaders, i flashed korn kernel i think and was able to get root. dont quite know what to do sorry bruh xD
See this post for an Odin or Heimdall One Click to Stock i897ucKK4... http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Instructions included.
Once ya get back to Stock KK4 (and maybe get Root if u wanna try that again), u probably need to stop there until u read up and get comfortable with the flashing processes etc. before u move on any further. :thumbup:
Trozzul said:
... i came from cm 10.1 and i backed up cm 10.1 first then tried to restore but it decided to boot loop.
Click to expand...
Click to collapse
You can't restore stock ROM (2.3.x) from CM10.1 (4.2.2). Different Android versions use different partitions. As mentioned in posts above, easiest way to go back to stock is Odin one-click file. No need to flash bootloaders again, so use version without bootloaders. In order to restore your CM10.1 backup you need to flash CM10.1 ROM first (to repartition), then flash same CM10.1 ROM one more time. When installing process is done, go ahead and restore your CM10.1 backup. No need to reboot the phone, nor install gapps. When restoring is complete, reboot the phone. Now you're back to your CM10.1 setup where you started from.
Easy to understand Captivate upgrade guide - https://docs.google.com/document/d/1YvC_lLbjk06WOttsifG8fD2QUHvC9_rDtZdNrDZKAFc/edit?pli=1
Val D. said:
You can't restore stock ROM (2.3.x) from CM10.1 (4.2.2). Different Android versions use different partitions. As mentioned in posts above, easiest way to go back to stock is Odin one-click file. No need to flash bootloaders again, so use version without bootloaders. In order to restore your CM10.1 backup you need to flash CM10.1 ROM first (to repartition), then flash same CM10.1 ROM one more time. When installing process is done, go ahead and restore your CM10.1 backup. No need to reboot the phone, nor install gapps. When restoring is complete, reboot the phone. Now you're back to your CM10.1 setup where you started from.
Easy to understand Captivate upgrade guide - https://docs.google.com/document/d/1YvC_lLbjk06WOttsifG8fD2QUHvC9_rDtZdNrDZKAFc/edit?pli=1
Click to expand...
Click to collapse
hmm interesting, i thought you were able to go to lower android versions, is this just like this for the cappy only? and soo pretty much alll i do is do what the guy said above me, and use your guide you gave me to root it?
Trozzul said:
hmm interesting, i thought you were able to go to lower android versions, is this just like this for the cappy only? and soo pretty much alll i do is do what the guy said above me, and use your guide you gave me to root it?
Click to expand...
Click to collapse
You can go lower, just gotta follow certain steps.
As for what you need to do, it was already all provided to you. I suggest you read through it a few times, make sure you fully understand it and then proceed with flashing.
That being said, right more you can do exactly what i told you and flash odin kk4 without bootloaders to have a working phone.
Sent from my SGH-I747 using xda app-developers app
4-2ndtwin said:
See this post for an Odin or Heimdall One Click to Stock i897ucKK4... http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Instructions included.
Once ya get back to Stock KK4 (and maybe get Root if u wanna try that again), u probably need to stop there until u read up and get comfortable with the flashing processes etc. before u move on any further. :thumbup:
Click to expand...
Click to collapse
crap forgot to mention this is a rogers version (i896) not at&t. will this be a problem?
Trozzul said:
crap forgot to mention this is a rogers version (i896) not at&t. will this be a problem?
Click to expand...
Click to collapse
Nop, I'm on Rogers myself.
Trozzul said:
crap forgot to mention this is a rogers version (i896) not at&t. will this be a problem?
Click to expand...
Click to collapse
Rogers stock 2.3.3 Odin one-click is available also in sticky threads, if you prefer Rogers ROM. Just do a quick search.

accidentally deleted system folder, flashed stock rom and phone won't boot properly

I have a us cellular note 5, was trying to install a rom, failed and ended up deleting my system folder. I flashed the stock rom with odin, but the phone can only boot to the logo stops, and then goes to recovery mode
Nic546 said:
I have a us cellular note 5, was trying to install a rom, failed and ended up deleting my system folder. I flashed the stock rom with odin, but the phone can only boot to the logo stops, and then goes to recovery mode
Click to expand...
Click to collapse
If you flashed a different recovery like TWRP then you'll have to use that again.. Have you rooted the phone before? If so, you probably have to flash stock firmware files one by one in Odin including flashing the recovery.
MrMike2182 said:
If you flashed a different recovery like TWRP then you'll have to use that again.. Have you rooted the phone before? If so, you probably have to flash stock firmware files one by one in Odin including flashing the recovery.
Click to expand...
Click to collapse
I have rooted it, any special order for flashing the files?
Nic546 said:
I have rooted it, any special order for flashing the files?
Click to expand...
Click to collapse
Since you've rooted the phone I'm gonna say the easiest way to fix this right now is to re-flash TWRP and download a rom that one of the devs on here have created and push it to the phone and use TWRP to flash it.. This is the best way for now since you are going to need a LOT more information and a better understanding of how to fully remove the root access because you cannot run a stock rom while rooted.. After you at least get it going then read around on here and you'll find all the answers and ways to fix things by those of us who've already been in your spot.
MrMike2182 said:
Since you've rooted the phone I'm gonna say the easiest way to fix this right now is to re-flash TWRP and download a rom that one of the devs on here have created and push it to the phone and use TWRP to flash it.. This is the best way for now since you are going to need a LOT more information and a better understanding of how to fully remove the root access because you cannot run a stock rom while rooted.. After you at least get it going then read around on here and you'll find all the answers and ways to fix things by those of us who've already been in your spot.
Click to expand...
Click to collapse
I'm trying to flash a custom rom but the most I can get it to do is hang up on the Samsung logo or a black screen, is there any specific roms I should try?

Categories

Resources