Database Develop

How to? VERIZON GALAXY TAB SCH-I800 Diag mode (QPST/QXDM/CDMA Workshop)

DOES ANY KNOW HOW TO PUT THIS DEVICE ON DIAG MODE.
CHECKED Settings - Wireless Networks - Click to Dialup Networking THIS OPTION IS NOT THERE, ALSO Diag/Testing Mode
*#4636*1111# DOES NOT WORK..

try **usbui on the dialer, it works for fascinate so it's worth a shot

I tried that but it did not work, I believe mainly because verizon removed the dialer from it, I had to instal a version ported from the fascinate I'll just keep trying because verizon went out of their way to make sure we dont use it as a phone but all the necesesary hardware is included on the tablet...

hesantos83 said:
I tried that but it did not work, I believe mainly because verizon removed the dialer from it, I had to instal a version ported from the fascinate I'll just keep trying because verizon went out of their way to make sure we dont use it as a phone but all the necesesary hardware is included on the tablet...
Click to expand...
Click to collapse
do you have a link to the dialer?

this is how i got the tablet to go in diagnostic mode. downloaded launcher pro from the marker, add hold to add shortcut on the screen go to activities then phoneutil and then phoneutil and select it. then make sure UART AND USB have the modem select it and that's it. now we just need the 16 digit password so we can play with qpst.. I tried most of the known passwords on cdma workshop but none of them worked..

hesantos83 said:
this is how i got the tablet to go in diagnostic mode. downloaded launcher pro from the marker, add hold to add shortcut on the screen go to activities then phoneutil and then phoneutil and select it. then make sure UART AND USB have the modem select it and that's it. now we just need the 16 digit password so we can play with qpst.. I tried most of the known passwords on cdma workshop but none of them worked..
Click to expand...
Click to collapse
a little help please, I did what you said and it all worked, but how do you access the dialer? I only get an error message that says "cannot make or take a call using Galaxy tab"

Uh even easier method to enter diag.
Go to to notes, In the search type
**usbui [**87284]

Thanks. Your **87284 (search) method was great. How do we find out the 16-digit password for CDMA Workshop?
Anyone? I tried all 101 Samsung ones, but they all fail.

Do you have a Verizon Tab firmware? My tab gets down.
It can only got into "Download mode" after I flashed it with Euro and Asian Firmware.
I'm very very worried about it.
Help me.

xiaobaixiaokai said:
Do you have a Verizon Tab firmware? My tab gets down.
It can only got into "Download mode" after I flashed it with Euro and Asian Firmware.
I'm very very worried about it.
Help me.
Click to expand...
Click to collapse
me too having the same problem
and I'm so tired from searching for the stock firmware

xiaobaixiaokai said:
Do you have a Verizon Tab firmware? My tab gets down.
It can only got into "Download mode" after I flashed it with Euro and Asian Firmware.
I'm very very worried about it.
Help me.
Click to expand...
Click to collapse
HA4ever said:
me too having the same problem
and I'm so tired from searching for the stock firmware
Click to expand...
Click to collapse
Guys, check out Alldroid in their galaxy tab forum they have a get back to stock post with the verizon firmware.

i800
please!can me more about search metod
if you can lay out a picture about search metod **87284 please!
big big thanks

PAULC91316 said:
Thanks. Your **87284 (search) method was great. How do we find out the 16-digit password for CDMA Workshop?
Anyone? I tried all 101 Samsung ones, but they all fail.
Click to expand...
Click to collapse
Use default samsung
It work I have used it

hi...
can anyone tell me the command to leave diag-mode IN QPST/QXDM...
not the dialer...
would be really great...

got her done
i installed kies for the drivers did the downloaded launcher pro from the marker, add hold to add shortcut on the screen go to activities then phoneutil and then phoneutil and select it then make sure UART AND USB have the modem select it and that's it. that should let you see it on the diag port open cdma workshop used the samsung default password changed prl and mdn min and evdo settings
im on an android plan which automatically gets your web rolling
the evdo changed on me twice but i just put it back and it stuck
i couldnt get the notepad i dont know where its at to do the **usbui but this was cool thanks for all the help i take no credit for this i just read these forums and im just repeating what i read on here thanks for all the help

in memo type ##8778#
work!)))

Anyone get this tablet working on Cricket or MetroPCS yet?

ncat.hq said:
in memo type ##8778#
work!)))
Click to expand...
Click to collapse
When i type ##8778#, there is nothing !
Please help me, my tab is Verizon galaxy tab

Hi all, Please excuse my English, I tried to do the flash in my sch-I800
verizon.Not good, because now it appears the logo of Samsung
tab.Can I do right? To work again? Thank you very much

qualcomm
Hi guys,
Thanks for the useful hints about the diagnostic interface.
Is there a Qualcomm chip in your Galaxy Tab, since you can use the QXDM interface? In my case there appears an unrecognized "7 CDCs" device.
I applied your descriptions also to the Galaxy S+ (Qualcomm chip) and could open a QXDM connection. Unfortunately the device doesn't answer.
Thanks,
eidelen

enable android wifi tethering on rooted at&t Atrix 4G

no need to run any script, or use any 3rd party tethering apps,
juz use Root Explorer, edit
"build.prop" under "system" folder,
find "ro.mot.entitlement_check=true" and change it into
"ro.mot.entitlement_check=false"
restart machine and tht's done, at&t authentication gone, tested and work
if this has been posted before, please remove, thx!

I guess there's really no reason to even add a custom APN with this, right?

Doesn't work for me. Still attempts to check.
Sent from my MB860 using XDA Premium App

Doesn't work for me, but i did something alse:
under my APN, i add "default,tether" in APN type (the last one) and thats it

it said readonly

kumar_r100 said:
it said readonly
Click to expand...
Click to collapse
if you're using root explorer you need to hit the tab near the top that says "Mount r/w" to edit the file.

It worked very great for me, only put default,tether.
Thanks!!!
Sent from my MB860 using XDA Premium App

Easy to do. Thanks.
Sent from my MB860 using XDA App

it works. thanks

Doesn't work on mine.. It prompts me that this takes alot of battery power and uses data then just goes away when i press OK..

sicwan said:
Doesn't work on mine.. It prompts me that this takes alot of battery power and uses data then just goes away when i press OK..
Click to expand...
Click to collapse
turn off wifi..

This works but doesn't show the notification. Could cause people to lose battery life with this...

Bump, works for me on 1.8.3 with Gingerblur
Change the ro.entitlement to false and then add ",tether" next to default on the APN type.
Reboot the phone and enable the hotspot.
You won't get a notification in the taskbar, but just disable it when you're done with it.

hi i have changed. ro.entitlement to flase and reeboted, but it says too much battery and when you press yes it just closes. how is supposed to run when you have it right?

RPK925 said:
hi i have changed. ro.entitlement to flase and reeboted, but it says too much battery and when you press yes it just closes. how is supposed to run when you have it right?
Click to expand...
Click to collapse
Well, if you changed it to "flase", then I'd imagine it not working.
Anyway, there is no "indication" that the hotspot is working, you need to verify that it is working by trying to connect to it via a computer.

jortiz17 said:
Bump, works for me on 1.8.3 with Gingerblur
Change the ro.entitlement to false and then add ",tether" next to default on the APN type.
Reboot the phone and enable the hotspot.
You won't get a notification in the taskbar, but just disable it when you're done with it.
Click to expand...
Click to collapse
1. I would like to know your process of rooting with gingerblur on 1.83
2. I have added false to that line, what do you mean by add tether to what APN?
3. would you have detailed instructions? like step by step vs. this vague info is just hard to follow.

I have had the best luck by simply changing the apn of att tether to "phone" from "broadband" using a SQL editor.
This allows mms and text messing to dynamically chose the correct apn (no manual downloading mms messages) and they icon works.
Sent from my MB860 using XDA App

Works, ty.
sent from MB860

Thanks mate, worked like a charm.
Sent from my MB860 using Tapatalk

atomoverride said:
1. I would like to know your process of rooting with gingerblur on 1.83
2. I have added false to that line, what do you mean by add tether to what APN?
3. would you have detailed instructions? like step by step vs. this vague info is just hard to follow.
Click to expand...
Click to collapse
Those instructions are completely, patently obviously crystalline. You should go google your google os then reread. Seriously, don't ask to be served on a silver platter. Read, understand and ask for specific clarification on a step that confuses you if google and forum search fail you. Rooting is well documented. Get unlazied for that one. Which apn should you consider adding tether to? Probably the one you are using, common sense would dictate. (Further extension of common sense states that you might need to make a new apn that is a copy of your current one with changes for this.)
Mine worked without adding tether to my apn! I don't know that this particular step is necessary. I've downloaded several hundred MB's through my phone on Steam without adding tether to my apn, but YMMV.
Sent from my MB860 using XDA Premium App

[Script] WiFi Only (Great for devices no longer activated)

Thanks:
Scary Alien for helping with some of my brainstorms
CPCookieMan for pointing me in the right direction with my initial thoughts for this project
MongooseHelix for the idea of the script vs a flashable zip
This is a very simple script that utilizes the radiooptions command to disable the radio but still allow use of WiFi without having to use airplane mode. Great for people who just upgraded and want to use their older device for an mp3 player with WiFi access. I wanted to make it to be run in init.d on startup but haven't successfully got it working that way yet so for now it can be run with script manager. This script can be run as follows:
1. Download the script and place it somewhere on your SD Card. (Maybe make a folder named Scripts to keep things organized)
2. Download Script Manager from the market.
3. Open Script Manager and navigate to where you saved the script then select the script.
4. Check the options for run as root and if you always use wifi only because you don't have service on your device check off Run at boot as well.
5. When prompted by superuser allow superuser permissions.
I have tested this script on my Incredible and my Eris as well and should be universal to run on any android device.
Download Here
If you are using this on an inactive device and don't want the activation screen coming up after reboot and new ROM flash follow these simple steps.
*NOTE: you need to be using a ROM that has EPST.apk in it for this procedure to work.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".

cvbcbcmv said:
cool! Will this work on any rom? I guess it should. This is just what I've been looking for. I'm getting a second dinc to test roms, this won't be on a line so this will be perfect. I haven't flashed scripts before (however it sounds easy enough) is it easy to disable it?
Click to expand...
Click to collapse
Yes. It will work on any rooted device and any ROM. Just run through Script Manager and if you want to disable it change the settings within Script Manager to disable run on boot then reboot. It's that easy.

cvbcbcmv said:
hey, will this work on a nexus one? I'm getting one for rom testing instead of a second incredible, so, same deal. I would think this would work, but will it?
Click to expand...
Click to collapse
Yes.. It should work on any rooted device running any ROM. If you want to double check to be certain you can check inside the ROM for /system/bin/radiooptions, then you will know for certain it should work. The script uses that to shut down the radio.

Cool, almost makes me wish I would have kept my Eris.

tether?
So can this allow us to tether the wi-fi only phone to our new network phone? the idea being to use the non-network phone to stream pandora, use google maps, etc?

jumperalex said:
So can this allow us to tether the wi-fi only phone to our new network phone? the idea being to use the non-network phone to stream pandora, use google maps, etc?
Click to expand...
Click to collapse
Yes. That can be done or connected to a WiFi ap. Whatever you would like to do with it.
Sent from my ADR6300

Quick question, I have an old incredible with a cracked screen I wanted to turn into an MP3 player like youre suggesting here. How exactly do I download from the market on a deactivated phone? Can't get past setup without the phone being activated.

Carnage9270 said:
Quick question, I have an old incredible with a cracked screen I wanted to turn into an MP3 player like youre suggesting here. How exactly do I download from the market on a deactivated phone? Can't get past setup without the phone being activated.
Click to expand...
Click to collapse
There is a way to get past that using ##778. I don't remember without going through it exactly what in all to do but i have a link at home
On ny comp and I can add the details when i get home.
Sent from my ADR6300

CondemnedSoul said:
There is a way to get past that using ##778. I don't remember without going through it exactly what in all to do but i have a link at home
On ny comp and I can add the details when i get home.
Sent from my ADR6300
Click to expand...
Click to collapse
Actually got through it by pressing activate and cancelling several times. It finally just bypassed it. Thanks for the script, working perfectly.

Carnage9270 said:
Actually got through it by pressing activate and cancelling several times. It finally just bypassed it. Thanks for the script, working perfectly.
Click to expand...
Click to collapse
Doing that will work but next reboot you'll probably get the activation screen again. If not you'll get it again after another ROM flash but it will come back at some point. I think I noticed on my Eris it was after a reboot. This procedure below got rid of it permanently.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
Then you shouldn't be prompted to activate again even after a new ROM is flashed

Just to be sure, is this reversible? Say if I needed to reactivate the the phone?

slow88lx said:
Just to be sure, is this reversible? Say if I needed to reactivate the the phone?
Click to expand...
Click to collapse
Absolutely. Simply open script manager and disable run on boot. You can then remove the script from your SD card.
Sent from my ADR6300

CondemnedSoul said:
Absolutely. Simply open script manager and disable run on boot. You can then remove the script from your SD card.
Sent from my ADR6300
Click to expand...
Click to collapse
Would they have to undo your other step from here? http://forum.xda-developers.com/showpost.php?p=16714569&postcount=12
Just asking before someone else does.

jermaine151 said:
Would they have to undo your other step from here? http://forum.xda-developers.com/showpost.php?p=16714569&postcount=12
Just asking before someone else does.
Click to expand...
Click to collapse
Good point . No they won't. Dial *228 option 1. It will ask for the phone number you want to activate and that stuff will be done ota. That's how I activated my Eris with a different number as well. I would suggest making sure to do that from a stock or stock based ROM as well.
Sent from my ADR6300

Hi!
Just a question? It isn't easir just use airplane mode + wifi on? on my CM7 nightly i can do it and runs fine. CM7 also remebers the last radio mode after hot reboot.
Sorry for my english. I'm not native

lordc said:
Hi!
Just a question? It isn't easir just use airplane mode + wifi on? on my CM7 nightly i can do it and runs fine. CM7 also remebers the last radio mode after hot reboot.
Sorry for my english. I'm not native
Click to expand...
Click to collapse
That is also an option to this script. Not everyone likes the airplane mode method for one reason or another though so this is an alternative for those people.
You're English isnt bad. I've seen natives with much worse and wouldn't have known you weren't
Sent from my ADR6300

I have the HTC Evo View 4G that I did this too, but for some reason when I ran the script I got the signal bar with an x through it saying "looking for service". Isn't it when it looks for service it's draining the battery more? Isn't there anyway to completly remove the signal bars?
Also, I'm trying to remove the activation upon startup, but the View doesn't have a phone to it. is there any other way to disable the activation throuhg the registry or something?

hasseye said:
I have the HTC Evo View 4G that I did this too, but for some reason when I ran the script I got the signal bar with an x through it saying "looking for service". Isn't it when it looks for service it's draining the battery more? Isn't there anyway to completly remove the signal bars?
Also, I'm trying to remove the activation upon startup, but the View doesn't have a phone to it. is there any other way to disable the activation throuhg the registry or something?
Click to expand...
Click to collapse
i think your right when you also go to battery it say cell standby is using alot of power mine was aroun23%

4218kris said:
i think your right when you also go to battery it say cell standby is using alot of power mine was aroun23%
Click to expand...
Click to collapse
It shouldn't be searching for service with the script running. Do you have the radiooptions command in system/bin? Apparently there are some roms around that do not.
Sent from my ADR6300

I'm confused....I have a non activated incredible that I use at work connected to wifi every day and i've never done anything special to it besides rooting and different roms...am i missing something here?

Sprint Note8 edit to APN w/o root

I live chatted with sprint to get the MSL and I thought they were giving me a BS code. Has anybody else received their code as "000000"? Yesterday it didn't work for me so I live chatted again to get the MSL. I was given the same number, but this time they also gave me the puk code which is pretty much useless for me for what I was trying to achieve. Today, while scrolling the secret codes looking for a service number to put in I found something, tried it, and failed and it automatically rebooted. Upon reboot I went through shortcut master for LTE functionality and I entered the MSL number as all zeroes again and viola, I could edit my APNs. Is this dumb luck or after chatting through sprint live chat is it possible they pushed something to the phone that took affect after live chat? Either way, I was able to edit what I need and now have hotspot working w/o the benefit of the tethering plan.

uuh, so the MSL is "000000" just to comfirm. LOL BUT you cannot edit APN type, at least i can't.

zone2oo0 said:
uuh, so the MSL is "000000" just to comfirm. LOL BUT you cannot edit APN type, at least i can't.
Click to expand...
Click to collapse
DOWNLOAD SHORTCUT MASTER LITE UPPER RIGHT PRESS THE THREE DOTS SELECT SEARCH TYPE IN LTE GIVE IT A FEW SCROLL DOWN TO THE FIRST com.testLTEfunctionability click it push launch scroll down to LTE APN Setting.. thats it

LOL, damn. thanks man!

zone2oo0 said:
uuh, so the MSL is "000000" just to comfirm. LOL BUT you cannot edit APN type, at least i can't.
Click to expand...
Click to collapse
Funny thing is that "000000" was the msl for the S8 plus as well.. lol

I used the website activation trick (where you leave your phone OFF while trying to activate it from the website before powering it on) and it gave me '000000' and I thought it just didn't know what the MSL was because I bought it from Samsung... I guess it is really 000000?

mbmike29 said:
I used the website activation trick (where you leave your phone OFF while trying to activate it from the website before powering it on) and it gave me '000000' and I thought it just didn't know what the MSL was because I bought it from Samsung... I guess it is really 000000?
Click to expand...
Click to collapse
I do this too.
And yes, the MSL is 000000. Just as it was on my S8+. I guess they aren't giving the phones unique MSL's any longer.

I can't edit it, faded in gray.
Sent from my SM-N950U using XDA-Developers Legacy app

I just installed the Shortcut Master.... followed your directions above and never even had to enter the 000000
Added ",dun" and done. Works perfectly,
Thanks.

Wilmingtech said:
I just installed the Shortcut Master.... followed your directions above and never even had to enter the 000000
Added ",dun" and done. Works perfectly,
Thanks.
Click to expand...
Click to collapse
Did you do this before the update?
Sent from my SM-N950U using XDA-Developers Legacy app

Androidwarrior said:
Did you do this before the update?
Sent from my SM-N950U using XDA-Developers Legacy app
Click to expand...
Click to collapse
Got the Note 8. Put it on the network. Installed all the updates. Installed all my apps and transferred everything from my old phone then did the edit to enable hotspot.
Version when I made the edit was AQI5
Sent from my SM-N950U using Tapatalk

Wilmingtech said:
Got the Note 8. Put it on the network. Installed all the updates. Installed all my apps and transferred everything from my old phone then did the edit to enable hotspot.
Version when I made the edit was AQI5
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Finally got it to work. I tried to edit it through ##3282# but it doesn't work that way. Update profile disables it as well.
Sent from my SM-N950U using XDA-Developers Legacy app

Androidwarrior said:
Finally got it to work. I tried to edit it through ##3282# but it doesn't work that way. Update profile disables it as well.
Sent from my SM-N950U using XDA-Developers Legacy app
Click to expand...
Click to collapse
Same here. Gotta follow directions above using the master shortcut app. 000000 doesn't unlock the APN settings in ##3282# (DATA) and you don't need you MSL code to use the app.
Sent from my SM-N950U using Tapatalk

I'm updated to latest version and used the shortcut app and worked perfect.
Sent from my SM-N950U using XDA-Developers Legacy app

Ok so changed apn setting with shortcut mastr lite and saved no problem. But i still see tether data being counted. Would anyone tell me what im doing or not doing thanks

ahachez1 said:
Ok so changed apn setting with shortcut mastr lite and saved no problem. But i still see tether data being counted. Would anyone tell me what im doing or not doing thanks
Click to expand...
Click to collapse
Data is data. Enabling hotspot in this way doesn't hide from Sprint that you are using data. They can see how much data comes from your phone on their network.
What It does do though is enables hotspot that you don't have to pay for. Although currently Sprint allows 10gb of reporting for free.
But if you do this mod when your 10gb is up you should still be able to hotspot.
-Sean
Sent from my SM-N950U using Tapatalk

I just tried it and it worked for me. I'd been using Easy Tether with my Note 5. Glad to have this as an option again.

I followed directions but when I launched the com.testLTEfunctionibility - nothing happened. Am I missing something.

Sprint Hotspot Mod Working!!!

I just received my Note 9 and have been playing around with things. After doing a little research and piecing together a couple of different posts, I can confirm that I have Sprint Hotspot working. The steps are as follows:
1. Download Shortcut Master Lite from the Play Store.
2. Open Dialer
3. Dial ##brand# (#27263#)
4. Say yes/accept everything - phone reboots
5. Open Shortcut Master Lite and select the Menu (three vertical dots in the upper right).
6. Select App Explorer, and then All Apps
7. Navigate (scroll down) to com.test.LTEfunctionality and select.
8. Select the first item labled "LTEFunctionalityTest" and select launch.
9. Scroll down to LTE APN Setting and select.
10. Select APN2 LTE/EHRPD internet
11. Scroll down to APN type and select.
12. Add "DUN" to the setting (it should read "default,mms,DUN") without quotations.
13. Select Menu and save your settings
14. Reboot
Congratulations, your device now has Sprint Native Hotspot!
Mods I posted this in the wrong sub forum...delete if neccessary....duplicate post

Are you using the Sprint branded one or the unlocked. I tried activating my unlocked one on Sprint they had to put in a ticket.
Sent from my SM-N950U using Tapatalk

zachspda said:
Are you using the Sprint branded one or the unlocked. I tried activating my unlocked one on Sprint they had to put in a ticket.
Click to expand...
Click to collapse
I have the Sprint branded, bought directly from Sprint.

Works!!! Thanks.
Sent from my [device_name] using XDA-Developers Legacy app

I did not need the ##brand# to get mine working. Just edited using Shortcut Master lite.

nickelghandi said:
I did not need the ##brand# to get mine working. Just edited using Shortcut Master lite.
Click to expand...
Click to collapse
Yeah sometimes it works without doing it but it was easier to write the steps having everyone do it. Really the only time ##brand# is needed is if your option to put DUN in is greyed out. Also remember any time a PRL or network update happens, you have to redo the steps.

clone1008 said:
Yeah sometimes it works without doing it but it was easier to write the steps having everyone do it. Really the only time ##brand# is needed is if your option to put DUN in is greyed out. Also remember any time a PRL or network update happens, you have to redo the steps.
Click to expand...
Click to collapse
Doing a PRL update doesn't remove the dun. It's the profile update that removes it. Performed a PRL update 3 times to make sure.
Sent from my Samsung SM-N960U using XDA Labs

Androidwarrior said:
Doing a PRL update doesn't remove the dun. It's the profile update that removes it. Performed a PRL update 3 times to make sure.
Click to expand...
Click to collapse
Gotcha... thx