Related
Hi,
I have unlocked the att tab long time ago and it was working fine. Then since few days i am messing around with different roms and modems and now my sim is not recognized. Does it means i have locked the device to att because of lot of flashing. Can someone please tell how to check if the att tab is still unlocked or locked. Maybe sim is not working because of wrong rom or modem. Sim working fine in my iphone. I was on rotohammer rom when tab worked like phone then flashed 2.3.3 and lost phone capability. Still has phone icon on the tab. Please need fix.
Thanks,
Hi Tabing.
It is me again.
Are you back on Roto rom now? or in one of the GB rom?
It seems only HyperDroid Androidmeda has the remark by the dev that it has roto unlock commands built in. With that, I assume unlocking is not a permanent thing?
well in my case I went to setting than network then mobile network and changed it to gsm and my cim has been recognized again by the system
just to let you know I was on froyo and I upgraded my tab to 2.3.3
good luck
Sent from my GT-P1000 using Tapatalk
can you upload a screen capture of the cim problem? that might be helpful to get to know your issue
Sent from my GT-P1000 using Tapatalk
ok thank guys for replying i will update my reply soon........kudos
I have an unlocked Captivate SGH-i897 running Jelly Bean (Slim Bean). I am trying to use it with a T-Mobile Sim card. I cannot connect to data in any form (wifi is fine), texts come in and go out but take a very long time (about an hour), and calls do not work (with the exception of one time one went through), saying "Mobile Network Not Available." I never appear to have any bars even though I am in a major city (Boston).
Data and data roaming are enabled. Airplane mode is not on. I have removed the battery and reseated the Sim card. I have tried every APN under the sun and soft reseted.
I have read about other people experiencing the same problem on these forums and elsewhere, but I have yet to find a solution that meets my needs. Thank you for your time.
Baroness said:
I have an unlocked Captivate SGH-i897 running Jelly Bean (Slim Bean). I am trying to use it with a T-Mobile Sim card. I cannot connect to data in any form (wifi is fine), texts come in and go out but take a very long time (about an hour), and calls do not work (with the exception of one time one went through), saying "Mobile Network Not Available." I never appear to have any bars even though I am in a major city (Boston).
Data and data roaming are enabled. Airplane mode is not on. I have removed the battery and reseated the Sim card. I have tried every APN under the sun and soft reseted.
I have read about other people experiencing the same problem on these forums and elsewhere, but I have yet to find a solution that meets my needs. Thank you for your time.
Click to expand...
Click to collapse
you probably have the same error as me, you might have forgotten to backup your eff folder, return to stock, bacuk those folders, flash again slim bean and then push the folder files, that way you will repair the network
Baroness said:
I have an unlocked Captivate SGH-i897 running Jelly Bean (Slim Bean). I am trying to use it with a T-Mobile Sim card. I cannot connect to data in any form (wifi is fine), texts come in and go out but take a very long time (about an hour), and calls do not work (with the exception of one time one went through), saying "Mobile Network Not Available." I never appear to have any bars even though I am in a major city (Boston).
Data and data roaming are enabled. Airplane mode is not on. I have removed the battery and reseated the Sim card. I have tried every APN under the sun and soft reseted.
I have read about other people experiencing the same problem on these forums and elsewhere, but I have yet to find a solution that meets my needs. Thank you for your time.
Click to expand...
Click to collapse
As stated above your efs folder could have been deleted in the flash which is common. Easiest way to figure out if its gone is to check your imei in settings to the one under your battery. If they match you're good. If they dont you'll have to restore your efs folder. If you didn't back it up manually you'll probably have to flash back to stock. But before you go through that check your internal SD card for a folder simply labeled backup. If you have that folder look and see if you don't have a copy of your efs in it. Some ROMs actually create a backup during the flash.
If your efs is intact and you're imei matches then the only other thing I can think of is to check to make sure you have a modem installed. Or look into flashing a different modem.
Sent from my SGH-I897 using xda app-developers app
m1batt1 said:
As stated above your efs folder could have been deleted in the flash which is common. Easiest way to figure out if its gone is to check your imei in settings to the one under your battery. If they match you're good. If they dont you'll have to restore your efs folder. If you didn't back it up manually you'll probably have to flash back to stock. But before you go through that check your internal SD card for a folder simply labeled backup. If you have that folder look and see if you don't have a copy of your efs in it. Some ROMs actually create a backup during the flash.
If your efs is intact and you're imei matches then the only other thing I can think of is to check to make sure you have a modem installed. Or look into flashing a different modem.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
I have to admit I am new to Android and am used to doing everything by following strict sets of instructions. I have a backup on my SD card; how do I restore it, or rather, where do I restore it to? Thanks again.
Baroness said:
I have to admit I am new to Android and am used to doing everything by following strict sets of instructions. I have a backup on my SD card; how do I restore it, or rather, where do I restore it to? Thanks again.
Click to expand...
Click to collapse
There are several apps available in the play store but the only one I've used is nitrality. It should copy it where it is supposed to go which is /efs.
Sent from my SGH-I897 using xda app-developers app
m1batt1 said:
If your efs is intact and you're imei matches then the only other thing I can think of is to check to make sure you have a modem installed. Or look into flashing a different modem.
Click to expand...
Click to collapse
I'm having the same problem. I checked my "about phone", and I don't see the imei value. But it is on the root in efs. The value matches the one on the back of the phone, and so does the one in sdcard/backup/efs.
So, how would I getting a new radio/modem?
johnd.the.cuban said:
I'm having the same problem. I checked my "about phone", and I don't see the imei value. But it is on the root in efs. The value matches the one on the back of the phone, and so does the one in sdcard/backup/efs.
So, how would I getting a new radio/modem?
Click to expand...
Click to collapse
dial *#06# - it will show you your active IMEI.
- DC
Anyone get this working? I made two backups: 1 copying the files and the other with nitrality. Neither worked and I have not been able to access the mobile network with my I897.
I had the same issue (or similar).
In my case I was not able to hold signal for more than a few seconds on 850 MHz, which is the frequency of my main carrier, however, my secondary carrier which uses 1900 MHz band, worked flawlessly.
I fixed it by installing a different modem.
KC1 seems to work great.
Sent from my SGH-I897 using xda app-developers app
how i installing a different modem.???
JASG514 said:
how i installing a different modem.???
Click to expand...
Click to collapse
Simply by flashing it in recovery.
Sent from my SGH-I747 using xda app-developers app
I am deployed to Afghanistan right now. I ordered a brand new XT862, rooted it, and installed safestrap 2.10 and cm-9-20120815-UNOFFICIAL-solana.zip. That worked beautifully.
Unfortunately I am having problems getting the radio to work. I would set an APN but then sometimes it would just not appear in the list. I would set it again and again, then sometimes all of the APNs would appear in my list until the radio failed. After flashing, formatting, and reflashing several times and having the default Verizion access points finally pop up out of nowhere in my APN list, I realized I never "unlocked" the phone. I am using a Roshan SIM.
The weird part is the radio would work for a period of time. First for several hours, then it would start failing more and more frequently.
I found the XT862-5.7.906-SAFE and flashed it, hoping it would ask me for an unlock code upon booting, but no dice. It just went into "Global" mode. I am testing right now to see if the radio stays stable.
So, I am wondering if these instructions:
Guide - Unlock XT862 for T-mobile/ATT
http://forum.xda-developers.com/showthread.php?t=1406812
will get me to the unlock code screen, and once unlocked, will my radio problem disappear when I reflash CM9? My Internet connection is painfully slow here in Afghanistan so I only want to download what I know will work.
I do have a second XT862 that I had unlocked, then rooted and flashed CM9 to and it is working very well on Roshan out here.
Thanks for your help!
While running the XT862-5.7.906-SAFE, the radio cut out and I got a BP paniced message. I couldn't remember all of it before it crashed completely, but it asked to connect the USB for debugging. While the screen was flickering, a window popped up asking if I wanted to switch to GSM.
The radio doesn't seem to be stable even with this firmware.
Any suggestions or help would be greatly appreciated.
The radio cut out again, so I tried switching it from global to CDMA and then to GSM to see if I could get it to reset.
It told me there were no GSM networks available, and then asked to switch to Global.
I hit ok, then it told me that the SIM was invalid...
I'm a noob to this phone stuff, but this just seems crazy.
It seems it's definately the phone, because I swapped the SIMs in my two phones and the problems persist with the new one. My functioning phone continues to work fine on the chip designated for the problem phone.
Did you flash the 883 radio?
MrObvious said:
Did you flash the 883 radio?
Click to expand...
Click to collapse
No, I haven't yet because I didn't know if that was going to solve my problem or not. Downloading is a challenge for me right now, too.
I don't know if not unlocking the phone before flashing CM9 caused the problem or if it's something else entirely that I am missing. I will want to have the phone usable in the states again. Will flashing the 883 radio give me any difficulties there?
I've went back though the steps that I did on my other, working phone and [edit] not unlocking is [/edit] pretty much the only difference.
I'm probably going to try to download the 883 radio stuff tonight when I get home from work and give it a try.
ThunderZuk said:
No, I haven't yet because I didn't know if that was going to solve my problem or not. Downloading is a challenge for me right now, too.
I don't know if not unlocking the phone before flashing CM9 caused the problem or if it's something else entirely that I am missing. I will want to have the phone usable in the states again. Will flashing the 883 radio give me any difficulties there?
I've went back though the steps that I did on my other, working phone and [edit] not unlocking is [/edit] pretty much the only difference.
I'm probably going to try to download the 883 radio stuff tonight when I get home from work and give it a try.
Click to expand...
Click to collapse
Unlocking the phone MUST be done on stock firmware. The XT883 radio is only required for using US GSM networks, such as AT&T and T-Mobile. The stock XT862 radio (after unlock) supports foreign SIM cards (and of course Verizon's Vodafone SIM).
As I recall, CM9/10 normally has issues with the GSM radio, if you need your phone, I suggest flashing a ROM based on a stock GB system, such as Maverick (4.0 version, 4.5 has a battery drain issue with an overclock script) which is based on 906. I tend to keep the phone on GSM/UMTS mode, as "Global" also turns on the CDMA radio, which utilizes more battery. The APN only matters for Data/MMS without the proper APN, you should still get talk/text/signal (no EDGE or 3G icons, which indicate data connection).
Skreelink said:
Unlocking the phone MUST be done on stock firmware. The XT883 radio is only required for using US GSM networks, such as AT&T and T-Mobile. The stock XT862 radio (after unlock) supports foreign SIM cards (and of course Verizon's Vodafone SIM).
As I recall, CM9/10 normally has issues with the GSM radio, if you need your phone, I suggest flashing a ROM based on a stock GB system, such as Maverick (4.0 version, 4.5 has a battery drain issue with an overclock script) which is based on 906. I tend to keep the phone on GSM/UMTS mode, as "Global" also turns on the CDMA radio, which utilizes more battery. The APN only matters for Data/MMS without the proper APN, you should still get talk/text/signal (no EDGE or 3G icons, which indicate data connection).
Click to expand...
Click to collapse
I didn't update the radio on my working phone to 883. It has been doing just fine on Roshan Afghanistan and AIS in Thailand. In the states I use Verizon, so I don't think GSM is a biggie.
So, I have to get back to stock and unlock, then go through the hack process again. I figured I probably did. So before I try to download this file, do you think the 1-click SBF here:
[xt862] .906 1-click-sbf.exe + tools [10-8-2012]
http://forum.xda-developers.com/showthread.php?t=1686911
will do the job? If not, do you know what will? I'm still running XT862-5.7.906-SAFE. I do have Blur_Version.5.6.890.XT862.Verizon.en.US.zip but I don't know how to install it. I'm still learning all of this stuff. Would RSDLite do it?
I wasn't very specific when I talked about the radio, sorry. More or less the voice connection would stop along with the data. It was just weird that sometimes the APNs would show up in the list and sometimes they wouldn't. When they did, it showed multiple from when I tried entering them several times. I don't know why it would write the changes but not read the list.
When about five Verizon APNs showed up and none of my Afghan APNs showed up, I realized I must have needed to unlock the phone. When I hacked it I just assumed it wouldn't have to be unlocked. I figured I WAS unlocking it. LOL!
Thanks everyone for your help.
ThunderZuk said:
I didn't update the radio on my working phone to 883. It has been doing just fine on Roshan Afghanistan and AIS in Thailand. In the states I use Verizon, so I don't think GSM is a biggie.
So, I have to get back to stock and unlock, then go through the hack process again. I figured I probably did. So before I try to download this file, do you think the 1-click SBF here:
[xt862] .906 1-click-sbf.exe + tools [10-8-2012]
http://forum.xda-developers.com/showthread.php?t=1686911
will do the job? If not, do you know what will? I'm still running XT862-5.7.906-SAFE. I do have Blur_Version.5.6.890.XT862.Verizon.en.US.zip but I don't know how to install it. I'm still learning all of this stuff. Would RSDLite do it?
I wasn't very specific when I talked about the radio, sorry. More or less the voice connection would stop along with the data. It was just weird that sometimes the APNs would show up in the list and sometimes they wouldn't. When they did, it showed multiple from when I tried entering them several times. I don't know why it would write the changes but not read the list.
When about five Verizon APNs showed up and none of my Afghan APNs showed up, I realized I must have needed to unlock the phone. When I hacked it I just assumed it wouldn't have to be unlocked. I figured I WAS unlocking it. LOL!
Thanks everyone for your help.
Click to expand...
Click to collapse
If you were on the 906 OTA, the one click EXE would work, no programs required. Connect phone in bootloader > run the exe > The phone will flash. In Global mode, when you check the APNs, only the Verizon ones will show, you MUST be in GSM/UMTS mode for your own APNs to show up. Also, if it's occasionally in and out, I wonder if the connection between the SIM and phone are bad, like a shake or movement will break the contact. (Which when a SIM is not present, only the Verizon APNs will show as well and would prompt for global mode)
Try taking the SIM out, cleaning the contacts, and placing it back in. If the sim seems loose, try slipping a single thin piece of paper behind it to make sure it's getting full contact. Otherwise, it might be a hardware fault.
Skreelink said:
If you were on the 906 OTA, the one click EXE would work, no programs required. Connect phone in bootloader > run the exe > The phone will flash. In Global mode, when you check the APNs, only the Verizon ones will show, you MUST be in GSM/UMTS mode for your own APNs to show up. Also, if it's occasionally in and out, I wonder if the connection between the SIM and phone are bad, like a shake or movement will break the contact. (Which when a SIM is not present, only the Verizon APNs will show as well and would prompt for global mode)
Try taking the SIM out, cleaning the contacts, and placing it back in. If the sim seems loose, try slipping a single thin piece of paper behind it to make sure it's getting full contact. Otherwise, it might be a hardware fault.
Click to expand...
Click to collapse
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
ThunderZuk said:
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
Click to expand...
Click to collapse
The Droid 3 does not require RSDLite, as it has fastboot. Which is able to flash certain parts alone instead of the whole system (or the whole thing together) it's easier than RSDLite and can make modifications without losing everything. That's how the XT883 radio is flashed without modifying the system.
The one click method would fully flash it as if you used an SBF in RSDLite. If you have safestrap enabled on safe; make a full backup with recovery, then disable safe-mode. You'll then reboot into your stock system, unlock there, then enable the safe boot again, restore your backup.
SIM unlocking is for good, no amount of flashing, updating, etc will revert it. If the phone DOES get service with the sim, then it's already unlocked.. if it's occasionally cutting out, that's a different issue.
ThunderZuk said:
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
Click to expand...
Click to collapse
Holy shinto! I didn't know it saved that! I figured it was gone!
So I disabled safestrap, then it kept telling me com.android.phone had stopped. I'd force close and it would say it again. I went back into safestrap, did a factory wipe, rebooted and now it is connected in "Global" mode again on the stock 5.6.890.XT862.Verizon.en.US. It was looking good for a while, until the phone just rebooted itself.
I put my other SIM in the phone, booted back up and it worked for a while until the signal dropped and the phone gave me an invalid SIM error again. So, it's given me an invalid SIM on two different SIMs now in stock and flashed ROMs.
The SIM is in there tight. I couldn't get a piece of paper in there. I cleaned the contacts again, but they don't look dirty at all.
I put the original SIM back in there, it booted up, never got signal, and rebooted itself again. It doesn't have signal now, and I assume it's just about to reboot itself again.
You think I got a bum phone? I didn't test it at all before I started hacking it.
Also, if I do the *#*#4636#*#* while it has no signal it tells me my IMEI number is unknown, if that helps. If press the turn off radio button, it does nothing.
[edit]It also tells me pretty much everything (MEID, IMEI SV, SIM ID, ect...) is unknown if I go into About Phone>Status[/edit]
ThunderZuk said:
Also, if I do the *#*#4636#*#* while it has no signal it tells me my IMEI number is unknown, if that helps. If press the turn off radio button, it does nothing.
[edit]It also tells me pretty much everything (MEID, IMEI SV, SIM ID, ect...) is unknown if I go into About Phone>Status[/edit]
Click to expand...
Click to collapse
That happens if either; Airplane mode is on, or you have an incorrect build.prop, have you modified it in any way? Also have you tried making a backup and turning safe boot off?
Also; If the zips are still on your SDCard, try reflashing your rom to make sure you have the correct build.prop.
Skreelink said:
That happens if either; Airplane mode is on, or you have an incorrect build.prop, have you modified it in any way? Also have you tried making a backup and turning safe boot off?
Also; If the zips are still on your SDCard, try reflashing your rom to make sure you have the correct build.prop.
Click to expand...
Click to collapse
I have safestrap turned off and it appears I am running on stock? It says I am running 5.7.890 and not 5.7.906. There is a Superuser icon in the all apps, but I think that is from where I rooted it.
I rebooted and all the numbers came back... for now.
I don't have airplane mode on. I tried to turn it on after reading your post. It caused the phone to reboot. Once rebooted, it came back up in airplane mode. I turned it off and it is connected again, for now.
I haven't messed with the build.prop that I know of. I only rooted, installed CM9 several times, formatted everything several times in-between those installs, and most recently flashed that XT862-5.7.906-SAFE.zip.
And before I even finished this post it rebooted itself on me again...
ThunderZuk said:
I have safestrap turned off and it appears I am running on stock? It says I am running 5.7.890 and not 5.7.906. There is a Superuser icon in the all apps, but I think that is from where I rooted it.
I rebooted and all the numbers came back... for now.
I don't have airplane mode on. I tried to turn it on after reading your post. It caused the phone to reboot. Once rebooted, it came back up in airplane mode. I turned it off and it is connected again, for now.
I haven't messed with the build.prop that I know of. I only rooted, installed CM9 several times, formatted everything several times in-between those installs, and most recently flashed that XT862-5.7.906-SAFE.zip.
And before I even finished this post it rebooted itself on me again...
Click to expand...
Click to collapse
Alright, did you put the sim in and get the unlock screen to put in the unlock code? 890 is alright to be on, that's what my stock system is. I would suggest staying away from CM9/CM10 as they are unstable when using GSM networks. Either stay stock or flash a ROM based on Blur (I suggest MavRom 4.0).
Skreelink said:
Alright, did you put the sim in and get the unlock screen to put in the unlock code? 890 is alright to be on, that's what my stock system is. I would suggest staying away from CM9/CM10 as they are unstable when using GSM networks. Either stay stock or flash a ROM based on Blur (I suggest MavRom 4.0).
Click to expand...
Click to collapse
It never asked me for an unlock. It just immediately put the phone in world mode.
I literally did this with the phone.
1. open factory sealed box
2. root the phone
3. install safestrap
4. format all partitions
5. install CM9
6. install SIM
7. repeat 4 and 5 serveral times
8. install 5.7.906 hoping to get an unlock screen in order to possibly fix radio issue
9. start this thread.
Now, I did steps 4 and 5 over and over again over about 2 weeks off and on while I tried to figure out what was going wrong. Like I said, I am running CM9 very successfully here since August on a different XT862 that I did unlock before rooting. I installed a KANG build, not a KEXEC.
The amount of times your device seems to be rebooting makes me think there is something wrong with it.
Sent from my XT860 using xda premium
ThunderZuk said:
It never asked me for an unlock. It just immediately put the phone in world mode.
I literally did this with the phone.
1. open factory sealed box
2. root the phone
3. install safestrap
4. format all partitions
5. install CM9
6. install SIM
7. repeat 4 and 5 serveral times
8. install 5.7.906 hoping to get an unlock screen in order to possibly fix radio issue
9. start this thread.
Now, I did steps 4 and 5 over and over again over about 2 weeks off and on while I tried to figure out what was going wrong. Like I said, I am running CM9 very successfully here since August on a different XT862 that I did unlock before rooting. I installed a KANG build, not a KEXEC.
Click to expand...
Click to collapse
Hm... while in unsafe (stock) the unlock screen should have come up. It will not on other roms, as for global mode, that is a default setting, without unlock, will only work with the verizon vodafone sim that came with the phone. Reboots can be either hardware, rom, or app problem. You can try a factory wipe and see if that helps the reboots. Trying to find solutions without you having to download more.
Endoroid said:
The amount of times your device seems to be rebooting makes me think there is something wrong with it.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
I was kind of worried that was the case. I just ordered a refurb unit just in case.
Long time omnirom user here with an issue I cannot find a fix for.
In my country there's a cell operator called RCS-RDS that has always had very good rates and unlimited 3g internet but, up until recently, very bad coverage. I have used 2 sim cards from this operator whenever I was in their coverage area for years now without a problem.
Last month RDS, has signed a national roaming agreement with VODAFONE so that you can use their network for service whenever you're outside RDS's coverage area. To use this national roaming service however, I had to replace the sim cards I had from RDS with new ones which, they say, operate in the UMTS 2100 band. I've checked the I9305's specs, and that band should be supported without a hitch.
Problem is however, that if I try to use either of the 2 sim cards, the phone gives me a no sim card error message and will behave as if there's no sim in the phone.
I'm using the radio recommended by mccamblesmith, the I9305 omni rom developer, in the omni rom development thread, and I have tried flashing every radio I could find, from the newest 4.4 radios to some very old 4.3 ones, but no change, and I've tested the two sim cards on other phones, including an S4, a beat up old Allview, an even older and more beat up Huawei U1220 and a 3G USB dongle, and both sims worked flawlessly on all of those.
I've also tried getting help on omnirom's irc channel, but the place is dead.
touchbattle.mika said:
Long time omnirom user here with an issue I cannot find a fix for.
In my country there's a cell operator called RCS-RDS that has always had very good rates and unlimited 3g internet but, up until recently, very bad coverage. I have used 2 sim cards from this operator whenever I was in their coverage area for years now without a problem.
Last month RDS, has signed a national roaming agreement with VODAFONE so that you can use their network for service whenever you're outside RDS's coverage area. To use this national roaming service however, I had to replace the sim cards I had from RDS with new ones which, they say, operate in the UMTS 2100 band. I've checked the I9305's specs, and that band should be supported without a hitch.
Problem is however, that if I try to use either of the 2 sim cards, the phone gives me a no sim card error message and will behave as if there's no sim in the phone.
I'm using the radio recommended by mccamblesmith, the I9305 omni rom developer, in the omni rom development thread, and I have tried flashing every radio I could find, from the newest 4.4 radios to some very old 4.3 ones, but no change, and I've tested the two sim cards on other phones, including an S4, a beat up old Allview, an even older and more beat up Huawei U1220 and a 3G USB dongle, and both sims worked flawlessly on all of those.
I've also tried getting help on omnirom's irc channel, but the place is dead.
Click to expand...
Click to collapse
i understand the issue here, but dont know how to fix it easiest way without loosing all your data and personal stuff etc.
it seems the issue is not modem related but i think its related with the roms settings you applied but dont know what exactly. all i can say is make a nandroid backup to external sd of current rom and flash back your official stock firmware with odin, root and install recovery and flash omni again, then try the sim cards again. if it does not work you can always restore the nandroid backup from recovery.
i hope this helps
6430
MaHo_66 said:
i understand the issue here, but dont know how to fix it easiest way without loosing all your data and personal stuff etc.
it seems the issue is not modem related but i think its related with the roms settings you applied but dont know what exactly. all i can say is make a nandroid backup to external sd of current rom and flash back your official stock firmware with odin, root and install recovery and flash omni again, then try the sim cards again. if it does not work you can always restore the nandroid backup from recovery.
i hope this helps
Click to expand...
Click to collapse
Due to a HDD failure a while ago, I no longer have the nandroid or the stock rom I saved from before I CFW'd the phone. Would changing to something like SlimROM or the likes help?
touchbattle.mika said:
Due to a HDD failure a while ago, I no longer have the nandroid or the stock rom I saved from before I CFW'd the phone. Would changing to something like SlimROM or the likes help?
Click to expand...
Click to collapse
well you can always make a nandroid backup at any time in recovery mode, you know that right? cant tell if changing CFW will help but you can try it..
Edit: if i were you, i would make backup and put anything else important in internal or external sd to my pc temporary and wipe everything system/caches/dalvik/internal memory and then flash another custom rom or flash back omni again
MaHo_66 said:
well you can always make a nandroid backup at any time in recovery mode, you know that right? cant tell if changing CFW will help but you can try it..
Click to expand...
Click to collapse
I know I saw a de-knox-ed stock 4.3 a while back, but can't find it again, would you happen to know anything about it?
touchbattle.mika said:
I know I saw a de-knox-ed stock 4.3 a while back, but can't find it again, would you happen to know anything about it?
Click to expand...
Click to collapse
you on old or new bootloader? old without knox counter, new with knox counter
MaHo_66 said:
you on old or new bootloader? old without knox counter, new with knox counter
Click to expand...
Click to collapse
I'm on old bootloader. The phone shipped with 4.1.2.
touchbattle.mika said:
I'm on old bootloader. The phone shipped with 4.1.2.
Click to expand...
Click to collapse
Here you go, download mod 7 and flash with odin maybe you will need to flash the custom recovery of your choice over again and then you can flash the supersu update zip in my odin guide (in my signature) to get root acces.
MaHo_66 said:
Here you go, download mod 7 and flash with odin
Click to expand...
Click to collapse
You sir are my hero. I've tried pacman rom and still no sim, trying this now.
touchbattle.mika said:
You sir are my hero. I've tried pacman rom and still no sim, trying this now.
Click to expand...
Click to collapse
allright hope this helps
MaHo_66 said:
allright hope this helps
Click to expand...
Click to collapse
No luck. Even after flashing stock 4.3 it still behaves as thoigh there's no sim.
touchbattle.mika said:
No luck. Even after flashing stock 4.3 it still behaves as thoigh there's no sim.
Click to expand...
Click to collapse
i dont know what else you could do is your imei number oke?
MaHo_66 said:
i dont know what else you could do is your imei number oke?
Click to expand...
Click to collapse
Yes, every other sim card i've tried works perfectly. These 2 UMTS sims are the only cards it won't accept.
touchbattle.mika said:
Yes, every other sim card i've tried works perfectly. These 2 UMTS sims are the only cards it won't accept.
Click to expand...
Click to collapse
cant help you further man, im sorry perhaps somebody with more knowledge about these kind of things could help you out..
MaHo_66 said:
cant help you further man, im sorry perhaps somebody with more knowledge about these kind of things could help you out..
Click to expand...
Click to collapse
Thank you for everything, might as well go back to omni.
Can somebody help me with this 4g problem?
This is what i did:
1.flashed custom ROM (worked like a charm,i did nandroid backup)
2.flashed other custom ROM (didnt like it so I restored the first one from nandroid)
3.everything went well except no imei and no baseband
4.reverted back to stock rom with odin
5.and here is the problem,no 4g signal at all. 3g/2g works fine.
If I post my build.prop can somebody tell me whats wrong?
I have tried to put my sim card in other phone and it works but not in my phone.
Did you enable 4G in Settings?
Sent from my GT-I9305 using XDA Free mobile app
Yes, I did...network mode is set to LTE
Is there a test that I can use to test is it a software or hardware issue?
Maybe an issue of Stock rom you flashed using odin.. Which one exactly have yoi flashed? What modem you have now? And finally, is your S3 i9305 or some i9305T variant?
Check this out:
Typ *#*#4636#*#* and goto Netinformation, then you will find a special-setup for the 2G 3G & 4G.
Sorry about my english. Cause i am german.
Sent from my GT-I9305 using xda premium
Thanks for your replies,I flashed stock german 4.4.4 from sammobile.It worked very good about 2 months.
I think that modem is xxufoa1 and version of phone is i9305 lte international.
If somebody could help me with this issue,I would appreciate that.But no hurries,I got new playmate S6 edge...
try doing a complete wipe of data and cache, then flash stock rom again to see if problem persists
I have tried many times but no help...
Hey, try flashing the parambin.zip file (look for it on google related to s3 lte, you'll find it easily). Another thing to try is just wait with the phone turned on with a valid SIM. I found out that sometimes it delayed a lot to get signal, specially when changing SIM carriers on another country. After a while waiting it finally succeeded (probably unrelated but I also saw on the catlog entries about upgrading the sahara file of the qualcomm chip -the modem-).