Related
I have an annoying problem, when I connect i9000 to PC using USB cable, only phone charging happens, other that that, nothing happens, the i9000 is not aware of USB connection and so the PC.
I've tried this on 3 PC, 2 with windows 7 64-bit, and the other with XP SP3.
I tried installing kies, samsung usb drivers, even somene in another forum gave me an update file to apply it through the recovery mode but, with no sccess.
Also tried what others said about unmounting SD card,.....connecting in debug mode,.........
All no sccess
maskr said:
I have an annoying problem, when I connect i9000 to PC using USB cable, only phone charging happens, other that that, nothing happens, the i9000 is not aware of USB connection and so the PC.
I've tried this on 3 PC, 2 with windows 7 64-bit, and the other with XP SP3.
I tried installing kies, samsung usb drivers, even somene in another forum gave me an update file to apply it through the recovery mode but, with no sccess.
Also tried what others said about unmounting SD card,.....connecting in debug mode,.........
All no sccess
Click to expand...
Click to collapse
Is the cable ok? (even if it charge), or maybe a pin damaged on your phone?
ttf said:
Is the cable ok? (even if it charge), or maybe a pin damaged on your phone?
Click to expand...
Click to collapse
Yes I used another cable, but no success
Do you have a custom launcher installed on your i9000? I have found (experience) that KIES will not fire if you are not using the stock launcher (TWLAUNCHER). Once I switch from LauncherEX to TWLauncher, KIES will fire and I can use it, the USB Mass Storage, etc....
can3gxw said:
Do you have a custom launcher installed on your i9000? I have found (experience) that KIES will not fire if you are not using the stock launcher (TWLAUNCHER). Once I switch from LauncherEX to TWLauncher, KIES will fire and I can use it, the USB Mass Storage, etc....
Click to expand...
Click to collapse
Thanks for your answer.
I tried this also, but didn't work for me.
BUT the issue was solved. Don't know the exact mechanism, but here's what I did.
As android is a little brother of linux, I told myself why don't you give Ubuntu a trial. So, I downloaded and installed it, then after booting in Ubuntu, I connected the phone, 1st no success but then enabled debug mode and the phone & computer identified each other
Excellent, but no ODIN or KIES for Ubuntu , little depressed, booted into Windows 7 and BINGO, the issue resolved completely.
Maybe the big brother Ubuntu, gave his little bra a push
Try cleaning port on phone
Hi, I went through similar - only ubuntu didn't work either.... I eventually read in a linux forum though about cleaning the usb port on the phone with alcohol. As was at home then and tried on windows again and BOOM! drivers like crazy...
Might try that too. My phone was only 3 months old and never really abused but it worked so what do I know.
Ubuntu or alcohol, I'm happy now that my issue was solved
Ubuntu or Alcohol
maskr said:
Ubuntu or alcohol, I'm happy now that my issue was solved
Click to expand...
Click to collapse
Or both in moderation if its going really bad.
i have the same problem.. i don't know how to work with ubuntu.. and alcohol didn't work..
Help..!
thommy86 said:
i have the same problem.. i don't know how to work with ubuntu.. and alcohol didn't work..
Help..!
Click to expand...
Click to collapse
You don't have to know much about ubuntu, just download it, then install it as any windows program, boot into ubuntu.
After that connect your phone to the computer, and make sure to activate debuging mode on i9000. You may need to disconnect and reconnect the cable before it works.
I also find that my PC will only recognize my phone if I reboot the i9000 right before connecting it.
Quirky, but livable.
Actually this issue is strange, and when I emailed Samsung about this problem, they asked me to install KIES
Yes My phone to only charging when connect cable nothing else happen please any help
Try This for your rooted phone
http://db.tt/xUlV2qo
it works on froyo only ...
Try it works for me
Step :
1. Download that file
2. Move that file to your /sdcard
3. Flash that zip on Cwm recovery
Sir my phone is not rooted and how to root without usb its not working
iamnajam said:
Sir my phone is not rooted and how to root without usb its not working
Click to expand...
Click to collapse
Try to root first ...maybe with .apk like z4root or other.. i have no clue ...
if you succes root your phone and then instal CWM with rom manager..
Then Flash that file
z4root is not working and oneclickroot need usb connection i cant root my phone by zroot plz tell any other way
maskr said:
Thanks for your answer.
I tried this also, but didn't work for me.
BUT the issue was solved. Don't know the exact mechanism, but here's what I did.
As android is a little brother of linux, I told myself why don't you give Ubuntu a trial. So, I downloaded and installed it, then after booting in Ubuntu, I connected the phone, 1st no success but then enabled debug mode and the phone & computer identified each other
Excellent, but no ODIN or KIES for Ubuntu , little depressed, booted into Windows 7 and BINGO, the issue resolved completely.
Maybe the big brother Ubuntu, gave his little bra a push
Click to expand...
Click to collapse
Try that, it worked for me
i have the same problem and found out that my phone has to be on idle mode... how do i put my phone in idle mode? it says to close all applications and i did but still nothing... and none of the above solutions worked for me.
my phone info is this:
Firmware version: 2.1-update1
Baseband version: I9000TUBJH1
Kernel version: 2.6.29 / [email protected] #2
Build number: ECLAIR.UBJI1
And to top it all my phone will not boot into download mode.
Guys,
I am having the same issue. This started when I upgraded my P from Win XP to Win 7. I tried the alcohol thing. I tried Ubuntu which could not recognize the phone, whatever mode (USB debug or not, media, kies or mass storage). Of course, I had tried before that to install the lastest USB drivers. I also tried Kies.
Nothing worked. Any further help ?
THanks
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Daneshm90 said:
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Click to expand...
Click to collapse
Yes..."SAMSUNG USB composite Device" comes up with an error. Device status shows, "This deveice cannot start. (Code 10)"
Nexus S Drivers?
Maybe u can try with Nexus S Drivers.
U can donwload from developer.android.com/sdk/win-usb.html
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
hamsterkiller said:
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
Click to expand...
Click to collapse
This did it! Thanks.
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
do you have the kies drivers installed? and is kies not running (inc. shut down tray agent?
try another usb port, that was a problem I had, Odin is picky with good or bad usb ports...
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-I9000 using XDA App
SamHaLeKe:
So i tried this, but it doesnt help. I still have in device manager something wrong.
When I'm trying Update Driver Software, windows cant found right driver...
Is it possible, that I something f*ct up at last flash? Before it everything works fine. When I flashed first time, i forgot the *.pit file - odin wrote "failed" - I tried it again, but correctly - everything was ok - I fashed kernel - after that in CMW I Instaled *.zip file with Juwe's ROM 4.3.1 and my phone reboot in landscape mode... and i cant change it to normal mode.
I tried factory reset from phone - there are some red lines with this: tsf format failed on dev/block/mmcblk0p2, but when i go to CWM mode through (volUP+home button+on/of button) and i did a factory reset there - is it without red lines. Somebody ask me if i tried reflash - so i am here with my "driver problem"
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
toxic1 said:
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
Click to expand...
Click to collapse
Noooooo, not reinstall that bloath ware, just the NEW drivers!
Sent from my GT-I9000 using XDA App
lol ok then just drivers then
I know this may sound dumb, but make sure you are using a compatible cable.. i.e. does data transfer, I bough a replacment cable months ago for my damaged one under the impression it did data because I could connect and transfer to USB (I know this is data)... but kies would not recognize the phone.. I ended up buying a real replacement. Problem solved.
I think, that my biggest problem is cannot connect to kies and odin...
i am in the end... so cabel is the same, i used it when i flashed befor - as i said my problem is in phone, not in drivers or cabels. Is here something to do flash without this drivers?
can you confirm there is no issue with your USB ports on your computer? just seems odd it wont recognize your phone in download mode... you are placing it in download mode when using odin right?
I just did a flash with mine to a stock rom,
Same problem, I can get to DL mode, but it does not recognize,
When I am in the standard Tab OS, with USB as mass storage, I can see if fine.
Odd how it just happened as well. I'd like to follow this thread see where it goes.
*edit reinstalling drivers does not resolve the issue,
- have not tried installing keis again yet though,
- also Odin recognizes it in Recovery Mode
*edit again - sorry guys, didnt realize i was in the i9000 forum, hit this on a google search and replied
I can go to the download mode throught 3-buttons combo - but odin recognize my phone - the same thing is in kies - it's vicious circle - i hope flash help me - but I cant do it, because i cant connect to odin
Unfortunatly I am out of help... I thin kyou may need someone who knows ADB and the phones system internals if ODIn won't recognize your phone in Donload mode... I have had my phone in several bad situations(Fried internalsd/bootloaders) but download mode would always connect me to ODIN..
Last try, try different versions of odin, 1.3 - 1.8 apparently it can be testy with different versions of windows.
Try the drivers & Odin 1.83 from my signature. Works all the time.
Hi all , i hope someone can help : i was installing team hacksungs ics rom last night it seemed to be going ok at first but then got stuck at the animated splash screen (1 hr 45 mins) i pulled the battery and when i tryed to get into cwm recovery the phone keeps just bootlooping after showing google logo , i can get into download mode but neither odin or heimdall can find my phone and windows reports unrecognised usb device,heimdall reports- ERROR: Failed to access device. libusb error: -12. I have unbranded i9000. All drivers present and usb cable(s) checked and are ok....thanks in advance for any help
I have the exact problem and situation
Is the phone bricked for good?
You might need the drivers listed in the TH ICS thread. Before changing the drivers try plugging your phone into a different USB port
You might want to try a different computer, the libusb errors are common and are usually solved by using a different computer (I have seen those errors while flashing IPhones, they were resolved after reformatting or using another computer[I'm not saying that that is the only way of dealing with libusb issues, I just didnt bother with em after I found out that a fresh start/system fixes em]). Also, if you are into linux, try a linux distro on your computer and see if Heimdall works from there.
Good Luck
guys i have had the same problem on this phone. To be honest I am not sure I wanna stay on ics anymore alone because of this issue. Nothing wrong the phone is great but the driver problem is flat out pathetic when **** hits the fan.
Here is how I solved my problem. I installed and uninstalled and restarted my PC so many many times. Stuck my USB cable into multiple ports. If that didn't solve my problem i Installed and uninstalled the Samsung drivers (without kies).
Played around with device manager when it said the phone is not recognized by uninstalling and removing phone from USB cable and replugging . I installed the android sdk USB drivers and tried upgrading the not properly installed drivers with them (which I think hasnt helped much to be honest) .
All in all what I am trying to say is......that I was so ambitious trying to get it to run that at the end i got it to work after many many tries. With many tries I mean I was trying this repetitive process from 3 am to 7:30 am and it DID NOT WORK. I went to bed. Next day I tried fixing it using repeating the whole process from 5 pm up to around 830 pm.
I dunno how I got it to run at the end. All I know is the time I invested trying to get it to run were nearly 10hours of repetitive installing and uninstalling. Sadly that is the only tip I can give you. It seems to me as though it just randomly feels like working out of its ass.
I even brushed the USB port of my phone with alcohol and a brush. As mentioned above trying another PC is worth a try. I tried my sister's laptop without success though and even formatted my desktop for the sake of it.
The last thing I recall doing before getting this phone to get recognized on my PC was as follows: I charged it for an hour and then booted the phone in download mode and decided to try it again. And bam it worked.
But do give this method a try.
1. Plug phone to PC
2. Uninstall your device(exclamation mark) via device manager and then unplug your phone
3. Uninstall sgs drivers
4. Reboot PC
5. Install sgs drivers
6. Plug phone in download mode in again
7. If you get error, device not installed properly then open device manager and uninstall the exclamation mark again
8. Unplug phone once uninstalled.
9. plug it in again
Also guys, just out of curiosity what is your OS and is it 32 or 64 bit?
Good luck
P.s: I know this post isn't helping specifically but I believe the only solution is playing around with the drivers and device manager until it decides to work. I might install another rom (Ive only experienced this with ics so far. And this seems to be a common issue apparently. Does this happen to people on 2.3.x as well ?) tomorrow cause this issue is too time consuming should it occur again. Only had it with nushor kernel though.
.
Sent from my GT-I9000 using XDA App
many thanks
beardedwonder said:
You might need the drivers listed in the TH ICS thread. Before changing the drivers try plugging your phone into a different USB port
Click to expand...
Click to collapse
thanks , installing nexus drivers done the trick
not bricked
vytman said:
I have the exact problem and situation
Is the phone bricked for good?
Click to expand...
Click to collapse
Hi vytman , install the drivers from here : w w w.multiupload.com/BUCFT8M42N
the drivers allow your comp to recognise your device(which is now nexus after ics install) then you can reflash stock samsung firmware in odin .
u can't get into recovery at all?
imgibby123 said:
Hi vytman , install the drivers from here : w w w.multiupload.com/BUCFT8M42N
the drivers allow your comp to recognise your device(which is now nexus after ics install) then you can reflash stock samsung firmware in odin .
Click to expand...
Click to collapse
Thanks m8
It solved my problem. I also had a faulty usb cable, I had to hold it in the right position so it could connect to pc
imgibby123 said:
Hi vytman , install the drivers from here : w w w.multiupload.com/BUCFT8M42N
the drivers allow your comp to recognise your device(which is now nexus after ics install) then you can reflash stock samsung firmware in odin .
Click to expand...
Click to collapse
I was unable to download the file...i am having the exact same problems and your solution seems logical. i tried going online and just searching for a nexus driver but that didnt seem to work. I think it might have been an old version of the driver. Is there a way for me to get this driver?
Yeah multiupload gone now new link http://nexusshacks.com/nexus-s-hacks/how-to-install-nexus-s-windows-usb-drivers/ere : ,hope this helps
sorry link in last post now dead...currently searching for solution....be back soon with new link
kayzsh4ow said:
I was unable to download the file...i am having the exact same problems and your solution seems logical. i tried going online and just searching for a nexus driver but that didnt seem to work. I think it might have been an old version of the driver. Is there a way for me to get this driver?
Click to expand...
Click to collapse
try here http://forum.xda-developers.com/showthread.php?t=895545
read just part 1
be sure you uninstall sgs drivers or else this wont work
good luck
Hi All,
here is the story, I was on MilkyS GB rom, made a ndriod backup, then flashed dark knight 2.1 then wiped , flashed DK3 w/ Semaphone. Today, I was going to flash stock JVU via Odin but while I was charging up the phone I already noticed Windows was showing error saying something like ' USB device is malfunction cannot install' , so I thought that must be a DK3 bug for not able to access to the SD card, so I did not care.
Went ahead and tried to flash Odin, sure enough Odin did not detect my phone, so did Google and found 'Gnex USB drivers' which by the way took forever to install, while waiting , I thought I might as well just go back to MilkyS GB by using the backup I have done before, so I went in recovery tried to restore, but not successful, so I went ahead and choose reboot....now I am stuck at the boot screen, pull battery, I can go into download mode , however, Odin cannot detect the phone so I still can NOT flash anything.... (just now tried all kinds of drivers I can find, CM7 USB driver, Google usb_driver_r04-windows, even installed the drivers within Andriod SDK, still can't detect the phone..)
Any suggestions ? am I out of luck ? by the way, tried installing drivers in 3 x different laptops and with different USB port on them...
Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.
scubadude said:
Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.
Click to expand...
Click to collapse
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
I guess you have tried going back in recovery mode using the 3-button combo but that is also not working?
Odin isn't recognizing your phone but does windows recognize it? If you uninstall all samsung drivers and then try to connect your phone to PC does it ask for installation of drivers? .. if it doesn't that means your phone's usb could have become faulty.. (just speculating)
Or you can try to use Heimdall instead of Odin.. maybe that'll work for you..
bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686
sorenba said:
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686
Click to expand...
Click to collapse
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.
btw , I have also already use Android SDK to install the Google USB driver....see attached.
Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.
asaf-g said:
Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.
Click to expand...
Click to collapse
thanks just tried the drivers from EZbases Odin, still did not work.
btw, tried brushing the connector on the phone in case of dust etc , still no go.
anyone else has any idea?..so sad right now ...
Sent from my Dell Streak using XDA
Same happened with all my laptops featuring a intel chipset. My desktop with nVidia chipset is the only one that detected it.
bestjsg said:
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.
Click to expand...
Click to collapse
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.
sorenba said:
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.
Click to expand...
Click to collapse
thanks tried created a ubuntu live booted usb drive , installed heimdall , same thing can't detect the phone and then tried SDB in command prompt but gave error : device not found....
Sent from my Dell Streak using XDA
tried windows sdb , will try booting into ubuntu tonight and use sdb ..if that exist...
Sent from my Dell Streak using XDA
tried sdb via linux also , and got error device not found... anyone any idea ?
Sent from my Dell Streak using XDA
have read more threads haven't found a solution yet...
Sent from my Dell Streak using XDA
Same predicament
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!
eurorv said:
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!
Click to expand...
Click to collapse
thanks for sharing ..just weird that no drivers for ics rom works and I was always told that as long as you can get to download mode the phone is not truely bricked...but guess that saying must be changed now....i
will virgin fix it for you ? will they charge you ?
Sent from my Dell Streak using XDA
My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!
eurorv said:
My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!
Click to expand...
Click to collapse
that is great news....do you know if they will have to open up the phone and flash the hardware?
Sent from my GT-P7510 using XDA
I have a problem with a i9001. I tried everything I can think off. It always stops when flashing in Odin 4.43 on:
<1>setup connection.....
I tried 3 different computers and all usb ports. Reinstalled Kies, installed only the samsung drivers. Rebooted several times. But still stops ons setup connection in Odin. I used several flashfiles: the seperate ones and the complete package....
I also used the jig to get the i9001 in download mode. To get the phone in Download mode is no problem, it works with the jig and also with the key combination. When i try to power the phone normal i get the Black Screen of Death. I also tried 4 different usb cables.
Can someone help?
Thanks in advance....
JUST USE THE ONECLICK UNBRICK
http://forum.xda-developers.com/showthread.php?t=1153310
DONT FORGET 2 SAY THX
cabloomi said:
JUST USE THE ONECLICK UNBRICK
http://forum.xda-developers.com/showthread.php?t=1153310
DONT FORGET 2 SAY THX
Click to expand...
Click to collapse
This tool is not for i9001 i think. But thanks anyway.
Help!
Did you try another ROM for flashing? Or did you try to just flash a recovery and boot into that recovery? If you run ODIN with Vista / 7: did you right click and run as administrator? Did you take out the battery of your phone for about 10 min and then insert USB and battery back and try again...?
i had that problem with two phones, my i9000 and my friends rogers infuse. try different usb ports on the computer. if that dont work, look up some stock firmwares for you phone and try to flash them. i find the original stock roms work best for fixing this. just be calm, there is always a way to fix it as long as you dont fry nothing.
wintel_mac said:
Did you try another ROM for flashing? Or did you try to just flash a recovery and boot into that recovery? If you run ODIN with Vista / 7: did you right click and run as administrator? Did you take out the battery of your phone for about 10 min and then insert USB and battery back and try again...?
Click to expand...
Click to collapse
I tried 5 different computers (Windows XP and Windows 7), 5 different usb cables, several flashfiles. Always stops at setup connection.
I am still having the problem. i really tried everything I can find.
Have you installed the USB drivers for your phone? It is also important to kill ANY running KIES application/service via task manager.
Sent from my GT-I9000 using XDA
I have exactly the same problem... Does anyone figured it out how to fix it?
Everything you should try first is written above ur post
Ajoslaf said:
Everything you should try first is written above ur post
Click to expand...
Click to collapse
Well, I'd install the drivers and I don't even have kies installed... but I'm still stuck at the SetupConnection step!
H83 said:
Well, I'd install the drivers and I don't even have kies installed... but I'm still stuck at the SetupConnection step!
Click to expand...
Click to collapse
look at My Android solutions link below, you need to use task manager to kill KIEs related files when running ODIN