hi guys
i have a problem with my galaxy s.i am installing android 2.3.6 by odin software.process is stuck at zimage .i wait for 30min until its not complete process.so i remove the usb cable .i am getting logo with mobile and computer like software update fail.good thing is downloading mode is working.but when i connect to PC .it showing usb cannot recongnised
i tried to put in recovery mode or pressing any button .i am getting software update fail
Related
Hi.
I have installed Cyanogen in my Galaxy S and i flashed back to froyo 2.2.1 . When Odin restarts the phone it hangs on black sreen before Galaxy S animated logo.
I tried flash it again with odin, but when i plug the USB cable Windows not recognice the device and i can't flash it again with Odin.
I tried it in 3 computers and the error appears again.
I was able to enter on Recovery and Download mode, but now if y try enter on recovery i get the Link error (Phone , Warning Signal and Computer).
I always can enter in download mode, but can't do anything because i can't connect it to odin..
The trouble isn't reflash, the trouble if i can't detect the mobile in ODIN
Solved.
pulling off the battery around half an hour, Windows recognizes the phone whitout problem and i can install Movistar original rom to seek for any Usb problem and send it to the service
Hey guys n gals really hoping for some help.
I was in the process of rooting one of my phones(Samsung Galaxy S vibrant) Done it many times on this phone plus my note and my tab2. I soft bricked the phone was able to get it into download mode instal an original 2.3 firmware to the phone via Odin. Now it wont go passed the Galaxy S Screen I cant get into download mode and it wont read the SD card(which has an ICS firmware on it for install) Any ideas on how I can get this back to even manufacturer steps?
When you enable download mode, android with a shovel doesn't appear, does it? That's doesn't metter. Just run Odin and connect smartphone to the computer. If ID:COM has appeared, download mode is active.
I have a galaxy mini s5570 with Froyo, yesterday I want to upgrade the firmware directly via Newest Kies downloaded from samsung site,
The first stage, the firmware download is complete, until the update process is running about 9%, suddenly I just pull out the sdcard, afraid interrupting the process, Hence an error message that occurs, the process must be repeated with the code ...
then the problem begins when I try to reupdate with code, kies ask me to make my galaxy into recovery mode, from this point until now my galaxy mini can not enter recovery mode, and if my galaxy is turn on its only flashes and become warm-> hot
until now my galaxy is still in the same condition
please help me , I don't know which process that must be use to recover my galaxy
mazai79 said:
I have a galaxy mini s5570 with Froyo, yesterday I want to upgrade the firmware directly via Newest Kies downloaded from samsung site,
The first stage, the firmware download is complete, until the update process is running about 9%, suddenly I just pull out the sdcard, afraid interrupting the process, Hence an error message that occurs, the process must be repeated with the code ...
then the problem begins when I try to reupdate with code, kies ask me to make my galaxy into recovery mode, from this point until now my galaxy mini can not enter recovery mode, and if my galaxy is turn on its only flashes and become warm-> hot
until now my galaxy is still in the same condition
please help me , I don't know which process that must be use to recover my galaxy
Click to expand...
Click to collapse
Enter download mode and flash the Firmware with Odin. That will work (for me), i think it shall work for you too.
F4uzan said:
Enter download mode and flash the Firmware with Odin. That will work (for me), i think it shall work for you too.
Click to expand...
Click to collapse
i've tried download mode
i pressed the power + volume down + home
but there's only flash... same with the first time ,
for the ODIN .. should I uninstal the kies before instaling Odin?
btw thanks for the advice gan
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Samsung logo freeze, cant recovery, can download mode (cant join to pc)
try with different usb cable
daniga74
Fariel2012 said:
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Click to expand...
Click to collapse
Hi there
you will need to give a usb jigg service to your device and then flsah it back to stock using odin
SGA s5830 stuck @ boot logo
I follwed these steps before it stuck @ boot logo
1 rooted phone through root_S5830.zip file
2 then used 6.0.4.6-cooper_fix.zip cwm recovery
3 decided to flash Touchwiz-Resurrected_ROM_V1.0.zip rom
4 followed all steps to flash thrrough CWM recovery
phone reebots samsung.com logo>> samsung boot animation shows up>>samsung name appears again keeps glowing and phone restarts!!!
after it I tried 6-7 different roms then i tried to flash through odin but wasnt able to do so but failed the device showed up in odin but wasnt able to flash stock rom
then i decided to go for Phil touch recovery I installed Philtouch recovery and tried to flash a custom rom now I'm stuck again at boot name GALAXY ACE s5830 nothing goes further!!!
I searched over XDA and some guy quoted this problem is solvable by using odin and putting phone in downloading mode (vol- button+home button + Power on ) I am able to put my phone in downloading mode, but when i conncet it to PC it says USB device not recognized WTF!!!!!???? 10 mins ago i connected my Phone using same cable same port same odin now this ***** appears ???
I swapped PC's, Cables, ports everything nothings working , phone wont start stuck @ boot logo pls help ASAP :crying:
That's it.. You have hard bricked your phone that's dead recovery and dead download mode. Give your phone the usb jigg service which will force it to go to either the download mode or the recovery mode whatever you want.
Hello
I have a mini S3 and went to install CyanogenMod on it but the ODIN stopped in the middle of the installation, causing the Android stay corrupted and whenever I called this message appeared: "firmware upgrade encountered an issue. Please select recovery mode in kies and try again "
So I downloaded the original S3 mini according to my country and everything and I install ROM, well, the installation took place correctly but leave it stuck in boot start screen showing the phone model, then I install the ROM again but the ODIN stopped again and there came the problem ...
it does not turn on the power switch and the only way to 'make it light up the screen' is connecting the USB, but when I plug the cable it gets on and off the screen repeatedly at the "firmware upgrade encountered an issue. Please select recovery mode in kies and try again " until I remove the cable and the phone turns off completely.
I hope you guys understand my problem and can help me please.
Already grateful : )! (sorry my english)
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Can't power on and enter on recovery menu
JanniekM00 said:
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Click to expand...
Click to collapse
I can't do wipe/factory reset in the recovery menu because i can't power on at all. It keeps only blinks (on and off) all the time when its plugged on PC or charger.
Thanks very much for your support!
Did you see the s3 mini logo if you turn on the phone. If you see this works download mode then? if not then your phone is bricked....
When you try and turn the phone on does it display the phone name? Or does nothing happen? If you get nothing then I'm afraid it's bricked. I'd try a different computer, different lead and possibly a different windows os. Then try and flash a stock rom using odin and be 100% sure it's for the model of the phone you have as there's loads of variants of the s3. Other than that, I can't help you any further
Hi everyone,
At first sorry for my english. I`m Dawid from Poland
OK, so i have gt-i8190N and when i trying to turn it on i see only white screen. Screen is ok because i can run phone in download mode.
Of course everyone says " so try to flash rom by odin" but i can`t because in odin i have error "FAIL Get PIT for mapping There is no PIT partition". I was try to flash rom with PIT file (to i8190N and i8190) but without succes.
Are anyone have the same problem?
I was try OneClick also.
Thanks for any answer.