[Q] Firmware version is availabe !!!!! - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi everyone
I've Rooted device
every time starting Kies i got notified to upgrade
Current firmware : PDA:LPD / PHONE:LPT / CSC:LP7 (XSG)
Latest firmware : PDA:LR8 / PHONE:LRK / CSC:LR8 (XSG)
is it safe to upgrade to latest version not affecting rooting
please advice
thx

It's safe using lies but you will loose root and will have to re root again.
It if you want you can download the latest software using sammobile.com and flash it using mobile odin. It can retain root using certain settings.
---------- Post added at 01:52 PM ---------- Previous post was at 01:52 PM ----------
Make sure you are on a safe kernel when on stock ics roms

Kies updates to or while on ics have known to cause bricks. As nokiamodeln91 says, make sure you're on a safe kernel.
Sent from my GT-N7000 using xda premium

No, don't do it. I have done that things once and I felt so stupid cause the entire system flipped. A golden rule is, once you get your things from xda
, stick to xda and if you want samsung updates also stick to stock roms.

Related

[Q] Need guide to installing darky's rom

Hi all.
I have Samsung galaxy s i9000 (GT-I9000).
I'm currently using pilotX rom. IBut it has a lot of problems.
So I want to try darky's rom.
What is the most stable one?
What kernel should I use?
Is there a step by step guide for installation?
Thanks,
FeL.
felzilber said:
Hi all.
I have Samsung galaxy s i9000 (GT-I9000).
I'm currently using pilotX rom. IBut it has a lot of problems.
So I want to try darky's rom.
What is the most stable one?
What kernel should I use?
Is there a step by step guide for installation?
Thanks,
FeL.
Click to expand...
Click to collapse
You can follow the steps
Fist install Darkys 10.2RE
http://www.hdtechvideo.com/?p=5
Then install Darky10.2.2 (latest stable release)
http://www.hdtechvideo.com/?p=48
Thanks.
I'll try it today.
P.S.
If there are suggestion for other good, stable rom I will be happy to hear about it.
felzilber said:
Thanks.
I'll try it today.
P.S.
If there are suggestion for other good, stable rom I will be happy to hear about it.
Click to expand...
Click to collapse
This one is good. and stable. Dont try to restore applications if you have a backup. Better install from the beginning..
anukilimanoor said:
This one is good. and stable. Dont try to restore applications if you have a backup. Better install from the beginning..
Click to expand...
Click to collapse
Do you mean once we have flashed darky 10.2 - DONT RESTORE APPS FROM BACKUP, WHY..??
what happens to all apps i purchased or downloaded..??
Rash said:
Do you mean once we have flashed darky 10.2 - DONT RESTORE APPS FROM BACKUP, WHY..??
what happens to all apps i purchased or downloaded..??
Click to expand...
Click to collapse
It doesnt mean that ... you can try to restore, but if you are facing any problem after restoring, like fc, random boot or lag then you have to worry about the restore. Normally for better performance use a fresh install (it is only my experience). If you are flashing the same version then no problem you can restore the application.
felzilber said:
Hi all.
I have Samsung galaxy s i9000 (GT-I9000).
I'm currently using pilotX rom. IBut it has a lot of problems.
So I want to try darky's rom.
What is the most stable one?
What kernel should I use?
Is there a step by step guide for installation?
Thanks,
FeL.
Click to expand...
Click to collapse
http://www.darkyrom.com/community/index.php?forums/rom-guides.23/
---------- Post added at 03:33 PM ---------- Previous post was at 03:31 PM ----------
anukilimanoor said:
This one is good. and stable. Dont try to restore applications if you have a backup. Better install from the beginning..
Click to expand...
Click to collapse
Totally disagree as 10.2 RE backs up all previous data on your SD, How ever it is recommended to use titanium back up for your apps
---------- Post added at 03:36 PM ---------- Previous post was at 03:33 PM ----------
Rash said:
Do you mean once we have flashed darky 10.2 - DONT RESTORE APPS FROM BACKUP, WHY..??
what happens to all apps i purchased or downloaded..??
Click to expand...
Click to collapse
You can restore from a backup just not a nand one from another rom use titanium backup and save all your apps (system data from CM7 etc will cause problems if you try and restore it) then restore once darkyRom has been flashed.
titanium backup has the nice feature of creating an update zip to flash in CWM after install
Hi, I am also in the same situation. I have been using PilotX for around a month now, but I am still not satisfied with my phone's performance. So I am considering installing Darky.
Did you succeed installing it? The main things I am trying to figure out now are:
1. Do I will need to install a special modem to make it work with Pelephone's network in Israel (my original phone used baseband I9000TJJJP3 if that says anything; with PilotX I now have I9000TUBJV6).
2. Since I am now on a different custom ROM, should I go back to my provider's stock ROM before proceeding with install, or does it not matter?
3. Any extra things to install for Hebrew support? (I don't need Hebrew menus, just properly rendering right-to-left in emails and messages).
I should probably start my own thread with questions (or read up some more about it first), but if you've gone through it now maybe you have tips.
Thanks
................
---------- Post added at 08:39 AM ---------- Previous post was at 08:38 AM ----------
....................
---------- Post added at 08:40 AM ---------- Previous post was at 08:39 AM ----------
...................
erang42 said:
Hi, I am also in the same situation. I have been using PilotX for around a month now, but I am still not satisfied with my phone's performance. So I am considering installing Darky.
Did you succeed installing it? The main things I am trying to figure out now are:
1. Do I will need to install a special modem to make it work with Pelephone's network in Israel (my original phone used baseband I9000TJJJP3 if that says anything; with PilotX I now have I9000TUBJV6).
2. Since I am now on a different custom ROM, should I go back to my provider's stock ROM before proceeding with install, or does it not matter?
3. Any extra things to install for Hebrew support? (I don't need Hebrew menus, just properly rendering right-to-left in emails and messages).
I should probably start my own thread with questions (or read up some more about it first), but if you've gone through it now maybe you have tips.
Thanks
Click to expand...
Click to collapse
Hi.
Sorry for the late answer.
1.I got Pelephone also. No need for special modem.
2. Just follow the manual.
3. You will need an rtl fix that you can find easily, and install hebrew layout for your keyboard.
Felix.
Page is not working
anukilimanoor said:
You can follow the steps
Fist install Darkys 10.2RE
Then install Darky10.2.2 (latest stable release)
PAGE IS NOT WORKING
Click to expand...
Click to collapse

(Q)What rom

What rom I can install on my phone? And after i install a rooted rom I can remove google apps? And afte if I want I can get back stock rom?
Sent from my GT-I8190 using xda premium
Well if you have searched the development section - you would have probably known that there ain't much Roms available !
And yes you can remove stock apps after rooting .
Also you can get back to stock by flashing firmware of your region via odin
The devs are still trying to get a working recovery to us. Give it time.

[Q] Samsung Galaxy S Advance ( GT I9070 ) Performace problem at Jelly bean 4.1.2

Hi All,
First i am a new comer for this community and new user for an android device .
I bought a new Samsung galaxy S Advance(GT-i9070). It came with Gingerbread. It was actually a phone with 768 RAM-I clearly verified this with the shop when I bought it. Last day I upgraded my phone to Jell bean with official Russian firmware (XXLPZ) and reset to factory default settings.
But now i am getting following issues on my phone.
It seems my devices is very slow and Stucks.Specially contacts,Media player,Messages. Also full RAM Capacity seems 521 MB at Application manager. All applications are now consuming memory from total 521 MB memory.Where is remaining memory? How can I obtain the remaining memory to speed my phone?
Mobile-networks---->Access point does not show any settings to setup APN to mobile network.
Some people on web says to root the phone , install ROM manager will solve these kind of problems. But i have called to shop and verified that rooting will void warranty.If i rooting is the solution ,Is there any possibilities to back it to Unroot when i need my warranty?
I saw there is a custom ROM also available to Jellybean 4.2.Is it possible to restore stock ROM later if i upgrade to Custom ROM?
What is /are ultimate solution/solutions all of my above problems.I hope all friends from this forum will guide me to sort this out
Thanks in advance
relax
thabotharshan said:
Hi All,
First i am a new comer for this community and new user for an android device .
I bought a new Samsung galaxy S Advance(GT-i9070). It came with Gingerbread. It was actually a phone with 768 RAM-I clearly verified this with the shop when I bought it. Last day I upgraded my phone to Jell bean with official Russian firmware (XXLPZ) and reset to factory default settings.
But now i am getting following issues on my phone.
It seems my devices is very slow and Stucks.Specially contacts,Media player,Messages. Also full RAM Capacity seems 521 MB at Application manager. All applications are now consuming memory from total 521 MB memory.Where is remaining memory? How can I obtain the remaining memory to speed my phone?
Mobile-networks---->Access point does not show any settings to setup APN to mobile network.
Some people on web says to root the phone , install ROM manager will solve these kind of problems. But i have called to shop and verified that rooting will void warranty.If i rooting is the solution ,Is there any possibilities to back it to Unroot when i need my warranty?
I saw there is a custom ROM also available to Jellybean 4.2.Is it possible to restore stock ROM later if i upgrade to Custom ROM?
What is /are ultimate solution/solutions all of my above problems.I hope all friends from this forum will guide me to sort this out
Thanks in advance
Click to expand...
Click to collapse
hey dude welcome to android as well as xda developers....i know these abt these lags.very first get the latest firmware for sgsa irrespective of the country u reside in.the jb firmware is new and has alot of bugs which will be cleared with updates...u should'nt have done jb update so soon...u must hav played wid ur device 4 a while .....in android these are bugs just install less apps and don not mess wid ur device unless u get a stable jb.....be calm sammy will release a stable firmware soon....hope so
thabotharshan said:
Hi All,
First i am a new comer for this community and new user for an android device .
I bought a new Samsung galaxy S Advance(GT-i9070). It came with Gingerbread. It was actually a phone with 768 RAM-I clearly verified this with the shop when I bought it. Last day I upgraded my phone to Jell bean with official Russian firmware (XXLPZ) and reset to factory default settings.
But now i am getting following issues on my phone.
It seems my devices is very slow and Stucks.Specially contacts,Media player,Messages. Also full RAM Capacity seems 521 MB at Application manager. All applications are now consuming memory from total 521 MB memory.Where is remaining memory? How can I obtain the remaining memory to speed my phone?
Mobile-networks---->Access point does not show any settings to setup APN to mobile network.
Some people on web says to root the phone , install ROM manager will solve these kind of problems. But i have called to shop and verified that rooting will void warranty.If i rooting is the solution ,Is there any possibilities to back it to Unroot when i need my warranty?
I saw there is a custom ROM also available to Jellybean 4.2.Is it possible to restore stock ROM later if i upgrade to Custom ROM?
What is /are ultimate solution/solutions all of my above problems.I hope all friends from this forum will guide me to sort this out
Thanks in advance
Click to expand...
Click to collapse
1. Root + install custom kernel. It will fly. :laugh:
2. Never had need to look for access point setting.
3. On JB you will not increase binary counter with rooting, like on GB. You can remove all evidence by flashing JB over again. "SU" file that provide root will be wiped.
4. Yes, you can use custom ROM, and then go back to stock by flashing stock firmware with Odin.
shut_down said:
1. Root + install custom kernel. It will fly. :laugh:
2. Never had need to look for access point setting.
3. On JB you will not increase binary counter with rooting, like on GB. You can remove all evidence by flashing JB over again. "SU" file that provide root will be wiped.
4. Yes, you can use custom ROM, and then go back to stock by flashing stock firmware with Odin.
Click to expand...
Click to collapse
Wow what a great news Let me clear on this scenario , ....Flashing Stock ROM(Ginger Bread) again after played with rooted and Custom Rom (Jelly bean )Cant be tracked to void warranty.Am i correct?
ksguptalive said:
hey dude welcome to android as well as xda developers....i know these abt these lags.very first get the latest firmware for sgsa irrespective of the country u reside in.the jb firmware is new and has alot of bugs which will be cleared with updates...u should'nt have done jb update so soon...u must hav played wid ur device 4 a while .....in android these are bugs just install less apps and don not mess wid ur device unless u get a stable jb.....be calm sammy will release a stable firmware soon....hope so
Click to expand...
Click to collapse
Thank you,Thank you :angel: I don't have idea how they are releasing updates.But now i flashed with Russian firmware ,My country is Sri Lanka(Asian country),Can i able to get update for Russian firmware at my county? or only i can able get update for SL firmware.I am sure my device is from Poland.Does this make any sense in update.If i want to downgrade to Stock rom again ,which firmware i need to use?Sri Lanka(I hope there is no such a think) or Poland firmware?
thabotharshan said:
Hi All,
First i am a new comer for this community and new user for an android device .
....
Last day I upgraded my phone to Jell bean with official Russian firmware (XXLPZ) ...
.....
Thanks in advance
Click to expand...
Click to collapse
I guess you do not realize that Samsung has launched three versions.
LPY 7th January 2013: A very bad rom.
LPZ 21st January 2013: A bad rom.
LQ4 7th February 2013: Very good version. Stable and perfectly functional for everyday use.
Consider LPY and LPZ as a big mistake. Should never have been released.
Одг: [Q] Samsung Galaxy S Advance ( GT I9070 ) Performace problem at Jelly bean 4.1.2
thabotharshan said:
Wow what a great news Let me clear on this scenario , ....Flashing Stock ROM(Ginger Bread) again after played with rooted and Custom Rom (Jelly bean )Cant be tracked to void warranty.Am i correct?
Click to expand...
Click to collapse
Yeah, only thing to check is that you didn't increased binary counter before. GB have method to root that increase it. But you can reset it now, there is Shaaans method in developer section of our phone forum.
Sent from Galaxy S Advance
---------- Post added at 08:21 PM ---------- Previous post was at 08:19 PM ----------
thabotharshan said:
Thank you,Thank you :angel: I don't have idea how they are releasing updates.But now i flashed with Russian firmware ,My country is Sri Lanka(Asian country),Can i able to get update for Russian firmware at my county? or only i can able get update for SL firmware.I am sure my device is from Poland.Does this make any sense in update.If i want to downgrade to Stock rom again ,which firmware i need to use?Sri Lanka(I hope there is no such a think) or Poland firmware?
Click to expand...
Click to collapse
It is not location related, you will get updates from country that your phone firmware is. So if you use Russian, the you will get update when it come for that country.
Sent from Galaxy S Advance
shut_down said:
Yeah, only thing to check is that you didn't increased binary counter before. GB have method to root that increase it. But you can reset it now, there is Shaaans method in developer section of our phone forum.
Sent from Galaxy S Advance
---------- Post added at 08:21 PM ---------- Previous post was at 08:19 PM ----------
It is not location related, you will get updates from country that your phone firmware is. So if you use Russian, the you will get update when it come for that country.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Now i got clear idea.i dint root my device when i use GB also.i Just upgraded JB.I Checked with some application,My device is not rooted yet.So i am going to upgrade to "XXLQ4 " .one of friend mentioned this in this thread,and root the phone.When i need warrenty related issue i will replace all with stock ROM.Is this a good approach?
ADR USR said:
I guess you do not realize that Samsung has launched three versions.
LPY 7th January 2013: A very bad rom.
LPZ 21st January 2013: A bad rom.
LQ4 7th February 2013: Very good version. Stable and perfectly functional for everyday use.
Consider LPY and LPZ as a big mistake. Should never have been released.
Click to expand...
Click to collapse
Thanks,How can we upgate LPZ to LQ4?Is that same as i did previously when i install LPZ?
Одг: [Q] Samsung Galaxy S Advance ( GT I9070 ) Performace problem at Jelly bean 4.1.2
thabotharshan said:
Now i got clear idea.i dint root my device when i use GB also.i Just upgraded JB.I Checked with some application,My device is not rooted yet.So i am going to upgrade to "XXLQ4 " .one of friend mentioned this in this thread,and root the phone.When i need warrenty related issue i will replace all with stock ROM.Is this a good approach?
Click to expand...
Click to collapse
Yeah. Just when you want to go back do not just use your firmwear, first flash things from guide how to downgrade. You have it on general forum I think. And rooting JB do not increase binary, like it was early on GB untill that other method.
Sent from Galaxy S Advance
shut_down said:
Yeah. Just when you want to go back do not just use your firmwear, first flash things from guide how to downgrade. You have it on general forum I think. And rooting JB do not increase binary, like it was early on GB untill that other method.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks Thanks...This is a great forum and Thanks you very much.
just download the whole firmware and flash it through odin.there are no problems with region u reside in.you can flash firmware of any region it wont create any problems and would work like a charm.
Sent from my GT-I9070 using xda app-developers app
I did like u said.now playing with my device
Sent from my GT-I9070 using xda app-developers app
You do not need to download again again the latest version....just install kies on your computer and just connect phone with usb.....kies will show update available.....it will update automatically
Sent from my GT-I9070 using xda premium
Одг: [Q] Samsung Galaxy S Advance ( GT I9070 ) Performace problem at Jelly bean 4.1.2
rohan.narula said:
You do not need to download again again the latest version....just install kies on your computer and just connect phone with usb.....kies will show update available.....it will update automatically
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
That is the case if yoh do not use custom kernel with custom recovery. If you do, do not do that. You will soft brick. And you will have to flash firmware with Odin anyway.
Sent from Galaxy S Advance
Lol
Sent from my GT-I9070 using xda premium
QQL4 laggin
Hi
I am from India and have flashed russian firmware QQL4 ..
Still it is lagging a lot and hangs frequently ... I have tried
Factory reset .. no use . Is there any solution ?
fahadfazil said:
Hi
I am from India and have flashed russian firmware QQL4 ..
Still it is lagging a lot and hangs frequently ... I have tried
Factory reset .. no use . Is there any solution ?
Click to expand...
Click to collapse
Yes, Root + install some custom kernel.
Hi above solutions are worked for me.But it still seems the phone is slow for me comparing with original gingerbread.May be it is because i got bad experience at first release of jellybean russian version. It is difficult to change first impression So i downgraded to original gingerbread.Ginger bread is very stable and running on more than 50% of devices in world.so i decited to use gingerbread for 6 month untill jellybean become stable
Sent from my GT-I9070 using xda app-developers app
thabotharshan said:
Hi above solutions are worked for me.But it still seems the phone is slow for me comparing with original gingerbread.May be it is because i got bad experience at first release of jellybean russian version. It is difficult to change first impression So i downgraded to original gingerbread.Ginger bread is very stable and running on more than 50% of devices in world.so i decited to use gingerbread for 6 month untill jellybean become stable
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Oooh bad move, Heres what you should have did:
1.Installed the XXLQ4 FirmWare via Odin:
http://androidjinn.com/how-to-insta...-bean-firmware-on-i9070-galaxy-s-advance.html
2.Rooted it: (Credits-Shaaan) [Root file attached] http://forum.xda-developers.com/showthread.php?t=2087424
3.Installed a custom Kernel : ThunderZap Kernel- http://forum.xda-developers.com/showthread.php?t=2103916 (Credits-varun.chitre15)
SIRI Kernel- http://forum.xda-developers.com/showthread.php?t=2073936 (Adi_Pat)
CoCore E 5.0 Kernel- http://forum.xda-developers.com/showthread.php?t=2140597 (Credits-cocafe)
(Search for other Kernels , i didnt included it all)-(Choose only ONE)
4.Installed a custom ROM : Pure Vanilla ROM- http://forum.xda-developers.com/showthread.php?t=2182697 (Credits-ikaster17)
Chucky Bean ROM- http://forum.xda-developers.com/showthread.php?t=2120956 (Chucky)
(Search for other ROMs , i didnt included it all)-(Choose only ONE)
recommended apps: (needs root access)
1.Titanium Backup :https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&feature=search_result
2.No-frills CPU Control :https://play.google.com/store/apps/details?id=it.sineo.android.noFrillsCPU&feature=search_result
3.Terminal Emulator :https://play.google.com/store/apps/details?id=jackpal.androidterm&feature=search_result
TRUST ME, YOU WILL NOT HAVE ANY PROBLEMS WITH YOUR PHONE
But read the other members comments first if you dont trust me haha :highfive:

[Q] Samsung Galaxy S3 Toolkit Build Versions

Hi, I have a question about the S3 Toolkit. I have a International S3 LTE, GT-I9305. I am on stock ROM, and on Android 4.1.2, build no. JZO54K.I9305XXBMB4, baseband version I9305XXBMA2. I am trying to root my phone through the toolkit, but there is a problem I encountered. There are two versions I see under International LTE that are similar to the above version numbers. The first one is 15. Android 4.1.2 [Build JZO54K BLL3] and the other is 16. Android 4.1.2 [Build JZO54K BLL5]. As you have read, i'm trying to root my phone, but if I select the wrong device version and build, it might brick my phone, so how do I find out which number is it behind BLL? Like BLL3 or BLL5?
AW: [Q] Samsung Galaxy S3 Toolkit Build Versions
Try framaroot to root your phone(frodo exploit), worked great for my s3lte:
http://forum.xda-developers.com/showthread.php?p=37508806
If i understand it rightly the toolkit contains kind of prerooted images which must correspond to your actual rom and will be flashed to your phone. Both versions you mentioned don't match your actual rom. Btw framaroot is an app and nothing gets flashed so imho much saver and no risk of flashing the wrong image.
Sent from my GT-I9305 using xda app-developers app
xtream2004 said:
Try framaroot to root your phone(frodo exploit), worked great for my s3lte:
http://forum.xda-developers.com/showthread.php?p=37508806
If i understand it rightly the toolkit contains kind of prerooted images which must correspond to your actual rom and will be flashed to your phone. Both versions you mentioned don't match your actual rom. Btw framaroot is an app and nothing gets flashed so imho much saver and no risk of flashing the wrong image.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Ok, actually I did try Framaroot once, but all the exploits didn't work. I'm going to try it again, I'll edit this post once I'm done.
Edit: I tried Framaroot again, and both exploits didn't work. I tried the options for installing SuperSU and Superuser, both also didn't work. (funny that the Settings button doesn't do anything.)
So, how do I root my phone?
herobrine_second said:
So, how do I root my phone?
Click to expand...
Click to collapse
Go to the dev section for the gs3 lte and look for Odin flashable pre root. Its awesome and it make your life a lot easier rather than having to fiddle with this and that
http://forum.xda-developers.com/showthread.php?p=32929446
[ROMS] Updated: 26/12/2012 - Pre-Rooted / Original Stock Odin Packages!
sent from a galaxy far away
jetbruceli said:
Go to the dev section for the gs3 lte and look for Odin flashable pre root. Its awesome and it make your life a lot easier rather than having to fiddle with this and that
http://forum.xda-developers.com/showthread.php?p=32929446
[ROMS] Updated: 26/12/2012 - Pre-Rooted / Original Stock Odin Packages!
sent from a galaxy far away
Click to expand...
Click to collapse
Thanks, but I found this app called Samsung Quick Root, and it says it can be used for all Samsung phones. Can I use this instead?
Edit : BTW, is there a way I can retain the original kernel (the one i'm using now; stock) so I can flash it back after installing the insecure kernel? (I can use any insecure kernel right?)
You could try but rooting doesn't give you a different kernel. It usually involves getting a custom recovery and flashing super user
There are some apps the use the exploit on the soc but I don't use them
Sent from my GT-I9305 using xda premium
OK, thanks for the advice given. For the method you have given me, I can't seem to find the correct one which matches my PDA, CSC and product code for the (modified) stock packages category down the post. So am I supposed to use anyone of the packages given? If something wrong happens, can I just flash back my package that I can get from sammobile.com?
Sent from a phone which can make Galaxies.
herobrine_second said:
OK, thanks for the advice given. For the method you have given me, I can't seem to find the correct one which matches my PDA, CSC and product code for the (modified) stock packages category down the post. So am I supposed to use anyone of the packages given? If something wrong happens, can I just flash back my package that I can get from sammobile.com?
Sent from a phone which can make Galaxies.
Click to expand...
Click to collapse
Yes you can flash them as long as you can or you can Google framaroot and it will root your device without flashing anything
Sent from my GT-I9305 using xda premium
Ok, thanks. Is there any specific reason why Framaroot doesn't work on my phone? All exploits and root methods don't work on my phone. Why?
Edit: Another different question, is there any way I can do a screenshot using the stock method (I believe it's Vol Down+Home?) on the S3? Without the motion (slide palm over screen) screenshot thing option turned on, I tried different combinations of hardware buttons, but none worked. How?
Sent from a phone which can make Galaxies.
Random bump, but just curious (I didn't want to flood that previous post. ). Will Samsung make a 4.2.1 update for the I9305? Or will they just wait until 5.0 is out, then make a 5.0 update (if Samsung does update the original S3 to 5.0 when its out, they probably should make one for the I9305 right?)?
Sent from my aweshum Galaxy S3 phone. How I wish it could make galaxies. Nah. Jk.
Same Case
herobrine_second said:
Hi, I have a question about the S3 Toolkit. I have a International S3 LTE, GT-I9305. I am on stock ROM, and on Android 4.1.2, build no. JZO54K.I9305XXBMB4, baseband version I9305XXBMA2. I am trying to root my phone through the toolkit, but there is a problem I encountered. There are two versions I see under International LTE that are similar to the above version numbers. The first one is 15. Android 4.1.2 [Build JZO54K BLL3] and the other is 16. Android 4.1.2 [Build JZO54K BLL5]. As you have read, i'm trying to root my phone, but if I select the wrong device version and build, it might brick my phone, so how do I find out which number is it behind BLL? Like BLL3 or BLL5?
Click to expand...
Click to collapse
Hi! I'm trying to root my i9305 and we have the same case. So what did you chose within the two? Or you just came with different rooting procedure?
Thanks!
I assume your phone build is not under the toolkit? I did not root my phone using that method. This is how I rooted my phone:
1. Using Odin, I flashed the CWM recovery.
2. Went into recovery, flashed the root zip I got from one of the threads here.
3. Rooted!
Sent from my GT-I9305 using xda premium
herobrine_second said:
I assume your phone build is not under the toolkit? I did not root my phone using that method. This is how I rooted my phone:
1. Using Odin, I flashed the CWM recovery.
2. Went into recovery, flashed the root zip I got from one of the threads here.
3. Rooted!
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Thanks for your reply!
Yep I downloaded the v7.0 toolkit and my phone is not into it. Yet on the latest version of the toolkit which is v7.40 my phone is already listed there. Maybe I could just wait for the developer to upload the latest version.

Galaxy Tab P1000 Custom ROM HELP

Any one here that can help me to put a custom ROM for my galaxy tab i am using stock ROM and i want to put a custom rom please anyone help me Thanks alot
According to me , android based 4.0 (ics) is one of the stable Rom for p1000. Now I'm running on it. No unknown bugs.
Watch my video regarding it- https://m.youtube.com/watch?v=NW3Hsh_6XCA
Download the Rom- forum.xda-developers.com/showthread.php?t=1841748
Sent from my HTC Desire 526G dual sim using XDA Free mobile app
i tried the method found online but somehow my tab got bricked.... not sure if it's soft bricked or hard bricked. it just stayed on the screen where there is a icon / picture of phone and pc with yellow exclamation sign in between.
initially it just hang on this screen and now it is flashing blinking. i tried several methods found online to unbrick it but all don't seemed to work. at a loss now.....
---------- Post added at 12:11 AM ---------- Previous post was at 12:10 AM ----------
Ben Shaji said:
According to me , android based 4.0 (ics) is one of the stable Rom for p1000. Now I'm running on it. No unknown bugs.
Watch my video regarding it- https://m.youtube.com/watch?v=NW3Hsh_6XCA
Download the Rom- forum.xda-developers.com/showthread.php?t=1841748
Sent from my HTC Desire 526G dual sim using XDA Free mobile app
Click to expand...
Click to collapse
do you know how to unbrick the tab?
do you also still have the software to flash tab into android 4.0? have you tried other newer android versions as of now?

Categories

Resources