Hey guys!
I am having troubles with wifi since i flashed DjangoManouche X 1.0 - 30A yesterday. I was on Gueste2X "GoodBye" v2.0R by Stefan (BB v20L). I wanted to try carburano's DjangoManouche, so i NVFlashed 28g by Stefan first and afterwards flashed DjangoManouche over CWM (After flashing CWM 5.0.2.8e and 30aBB). Everything worked fine. After a couple of hours my Phone wasn't able to catch up some wifi out of sudden. I did a full wipe and flashed DjangoManouche again but still no wifi. So i changed BB back to 20L and NVFlashed Gueste2X "GoodBye" v2.0R hoping it would solve the issue. But it's still there :crying:
Everytime i try to turn wifi on it just says "activting", but nothing moves. Very strange thing
any suggestions?
so long...
Try to flash the rom with another cwm (5.x). Search in the dm thread for wifi.
Gesendet von meinem LG-P990 mit Tapatalk 2
khaludi said:
Hey guys!
I am having troubles with wifi since i flashed DjangoManouche X 1.0 - 30A yesterday. I was on Gueste2X "GoodBye" v2.0R by Stefan (BB v20L). I wanted to try carburano's DjangoManouche, so i NVFlashed 28g by Stefan first and afterwards flashed DjangoManouche over CWM (After flashing CWM 5.0.2.8e and 30aBB). Everything worked fine. After a couple of hours my Phone wasn't able to catch up some wifi out of sudden. I did a full wipe and flashed DjangoManouche again but still no wifi. So i changed BB back to 20L and NVFlashed Gueste2X "GoodBye" v2.0R hoping it would solve the issue. But it's still there :crying:
Everytime i try to turn wifi on it just says "activting", but nothing moves. Very strange thing
any suggestions?
so long...
Click to expand...
Click to collapse
i flashed dm with 6.x cmw
Mine works just fine without problems just try to install stock 30a with smartflash and the DM rom.
snakething said:
Mine works just fine without problems just try to install stock 30a with smartflash and the DM rom.
Click to expand...
Click to collapse
Where do i find the 30a stock with smartflash?
You can download the official KDZ here http://csmg.lgmobile.com/s...00/V30A_00.kdz for europe.
Then use this tool http://depositfiles.com/files/416e0lzaf to convert into a format that you can smartflash.
I've experienced some radio issues with v30a BB, so i've reverted back to v28 BB without any issues.
try flashing the 28G BB and see if that solves your issues, also remember to check the obvious, (wifi is working on another computer etc.)
also remember to forget and renew the wifi association on your phone between tests.
Hey guys,
Flashing Stock v30a and 28g bb didn't do it for me I flashed [TOOL] Full Brick Repair (Clean & Easy) for now. Everything works except wifi.
I attached a screenshot of the wifi bug. Any further suggestions?
reboot phone... I believe i know this bug from an other rom..
maybe you check something too... WHEN your wifi like on that screen is off, your HSDPA data is also off? (the bars are grey not blue..) i had that problem with paranoid android sometimes.. my wifi started to get buggy and my data also didnt worked anymore.. end of the result.. after 1 day i got about 60 whatsapp msg in 5seconds :/
rockyy said:
reboot phone... I believe i know this bug from an other rom..
maybe you check something too... WHEN your wifi like on that screen is off, your HSDPA data is also off? (the bars are grey not blue..) i had that problem with paranoid android sometimes.. my wifi started to get buggy and my data also didnt worked anymore.. end of the result.. after 1 day i got about 60 whatsapp msg in 5seconds :/
Click to expand...
Click to collapse
rebooting doesn't do it too^^ yes some kind of off. When i open a webpage it turns blue... the phone is constantly trying to turn wifi on
It happened to me this thing before. In my case the baseband or the RIL was the fault. I don't remember very well...
May be you people are using a Baseband which is not matching. Try Leaked V30A baseband. Works perfect and ROM and BB are made for each other.
Check this post for BB link and also how to install in any circumstances. Hope this helps. If helps, click Thank.
khaludi said:
Hey guys!
I am having troubles with wifi since i flashed DjangoManouche X 1.0 - 30A yesterday. I was on Gueste2X "GoodBye" v2.0R by Stefan (BB v20L). I wanted to try carburano's DjangoManouche, so i NVFlashed 28g by Stefan first and afterwards flashed DjangoManouche over CWM (After flashing CWM 5.0.2.8e and 30aBB). Everything worked fine. After a couple of hours my Phone wasn't able to catch up some wifi out of sudden. I did a full wipe and flashed DjangoManouche again but still no wifi. So i changed BB back to 20L and NVFlashed Gueste2X "GoodBye" v2.0R hoping it would solve the issue. But it's still there :crying:
Everytime i try to turn wifi on it just says "activting", but nothing moves. Very strange thing
any suggestions?
so long...
Click to expand...
Click to collapse
Try this:
1: Nvflash topogigi's v28g rom
2: boot and complete the first wizard
3: Shutdown the phone
4: Nvflash 5.0.2.8e recovery
5: Go in cmw wipe cache and dalvik cache
6: Flash diango manouche 1.0 rom
7: Flash v30a RIL
8: Boot
PS: Obviously, make sure you have v30a Baseband
I had also wifi issue (not turning on) and for me this procedure worked.. hope it works also for you
HIT THANKS IF I HAVE HELPED YOU
cmahendra said:
May be you people are using a Baseband which is not matching. Try Leaked V30A baseband. Works perfect and ROM and BB are made for each other.
Check this post for BB link and also how to install in any circumstances. Hope this helps. If helps, click Thank.
Click to expand...
Click to collapse
Didn't work for me did exactly what you discribed but still no wifi
The wifi problem is the same as SuperSkill got described here
I'll try Buccio's method and report back!
Do you think it could be a hardware issue?
khaludi said:
Didn't work for me did exactly what you discribed but still no wifi
The wifi problem is the same as SuperSkill got described here
I'll try Buccio's method and report back!
Do you think it could be a hardware issue?
Click to expand...
Click to collapse
I don't think it's a hardware issue
Buccio said:
Try this:
1: Nvflash topogigi's v28g rom
2: boot and complete the first wizard
3: Shutdown the phone
4: Nvflash 5.0.2.8e recovery
5: Go in cmw wipe cache and dalvik cache
6: Flash diango manouche 1.0 rom
7: Flash v30a RIL
8: Boot
PS: Obviously, make sure you have v30a Baseband
I had also wifi issue (not turning on) and for me this procedure worked.. hope it works also for you
HIT THANKS IF I HAVE HELPED YOU
Click to expand...
Click to collapse
Sadly it didn't work out for me either
I'm just searching for a fix for my Wifi. It's not necessary wich rom i should flash i just want my damn wifi to work :silly:
Please guys any other solutions?
if NVflash is not working (which does a fresh install)
sounds bad. unless its your wifi hub / router.
check to make sure you have wifi with another device. and data is in fact working.
then NVflash topo's v28G rom. then smart flash v28BB
then boot phone. and after the initial setup, try logging into wifi without restoring anything.
if it does work then, do the rest of your restoring, and see if it holds out.
khaludi said:
Sadly it didn't work out for me either
I'm just searching for a fix for my Wifi. It's not necessary wich rom i should flash i just want my damn wifi to work :silly:
Please guys any other solutions?
Click to expand...
Click to collapse
did you try flash V30A baseband?
For me wifi is working
For me wifi working but it can't connect to a router , it's in a wifi loop (Searching, establishing, disconnecting)
EDIT: I flashed v30A with clean installation and cwm 5.0 and the same bug , and i flashed cm10 and still
EDIT2: Router problem , i'm genius
necrowakker said:
if NVflash is not working (which does a fresh install)
sounds bad. unless its your wifi hub / router.
check to make sure you have wifi with another device. and data is in fact working.
Click to expand...
Click to collapse
It's not about the wifi is not connectin or else, it's about wifi wont turn on at all (look at the screenshots i attatched here
I'll try to flash as suggested
pasolvon said:
did you try flash V30A baseband?
Click to expand...
Click to collapse
of course look at the screenshots
i experienced radio (wifi, call signal, etc.) issues with v30BB you tried using v28bb.
there has already been a few reports of v30BB causing issues with wifi and phone calls.
if your radio is not working, you got to think about what could be affecting that, some thing as simple as a bad radio flash that finished could be causing your issue.
flash topo's v28 nvflash, .. that will allow you to use smartflash over new partition layout, and flash v28bb then update to DJM rom/kernel and give us some feedback.
dont restore anything, just check wifi with a clean install, full wipe. and remember to do a reboot after the initial setup.
Related
Hi,
i´ve got a (big?) problem...i dont know why..but i cant make and get calls!
even the dataconnection doesnt work...
i have now the wgspolestras rc1 rom...i had tried the cm7...and the..i forgot..
i`ve made a clockworkmod restore...
nothing worked...
so i`ve flashed the baseband from 06.06 and updated the ril from the 06.06
no chance..no call...
what can i do?? i am a bit pissed off, no nice friday evening... -.-
i am new to the baseband & ril..so sorry if there is the answer somewhere...
hopefully someone can help me..
thanks
If nothing works, I suggest you do an NVflash. it's basically a clean flash of the stock ROM, which will clean everything (make sure you packup your apps on external sd card)
link of how to do it and the files you need - http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
thanks..i will look at this...i hope it will work!
EDIT:
The device is flashing....
after that, there is a stock rom on the device, right?
i have to root it again, and to install romanager with clockworkmod and install a rom?
EDIT2:
NO SUCCESS!!
the lg stock rom has started, i got an sms, then i tried to call....nothing!!
When i call my phone ->its busy...
sending/receiving sms seems to work..
you have to root your phone again, and install rom manager/clockworkmod.
try calling someone else, or try receiving a call. This is the gold standard, if this doesn't work, then there's not much else you can do.
i got a bit shocked!!
but i`ve flashed the newest vodaphone stock rom....
and it worked! (okay the internetsettings are different from my provider)
but that worked too
i am going to root and flash it now...it should work..
EDIT:
Its working...somehow!! Dataconnection is very bad...
i`ve flashed the RC1 from WGSpolestra...i can call in and out, but with data connection the signal is very bad...can i flash new ril and baseband?
xda_digga said:
i got a bit shocked!!
but i`ve flashed the newest vodaphone stock rom....
and it worked! (okay the internetsettings are different from my provider)
but that worked too
i am going to root and flash it now...it should work..
EDIT:
Its working...somehow!! Dataconnection is very bad...
i`ve flashed the RC1 from WGSpolestra...i can call in and out, but with data connection the signal is very bad...can i flash new ril and baseband?
Click to expand...
Click to collapse
just try out other baseband and ril, not every version is working for everybody ...
i`ve flashed the 606 baseband and ril.
but i dont understand why that happens...from now to then these problems..
anyway..the phone is working again..
Same problem..
Hey there,
Ive got the same problem.
I was using the CM Nightly Rom, but just one dat, I got an "X" instead of having any signal.
Dont have a clue why or what happend.
I tried other roms, but All the same problem.
At the end, I tried the NVFLASh, that works, But only with the 2.2 Roms.
Today i put the latest nightly on my Lg, and My signal was gone after half a day.
Weird, Weird...
Greetz
WyCkson.
i think that i found the problem....
wich launcher are u using?
i had used the pro plus launcher, but after a reboot all my widgets are gone (loading problem) so i switched to the adw launcher and no problem any more!!!
the phone works well now!!
How stupid is that....such probem because of the launcher!!!?
hello,
Is it possible it's sim card problem ?
Try with another to see.
bye
i`ve used my card in a other phone..no problem..
No Calls suddenly Don't know what to do!!!!
Suddenly NO Incoming Calls. Knew it the next day when my friend personally came to see.
Also got scolded from company.
Dont' know what is the problem. But 3 to 4 restart helps.
I feel I may be an IDIOT for buying this phone.
Hi,
I updated my cm kang today and everything was working fine. I rebooted my phone and my battery percentage went from 4% to 100%. and it's stuck on it.
When i put the percentage mod of in CM7 i see a battery icon with "?" in it.
I tryed the following things:
Wipe data/factory reset
Wipe cache partition
Wipe Dalvik Cache
Wipe Battery Stats
Fix Permission
Installed a older kang but nothing worked.
I searched on google and some people fixed this problem by getting a new battery.
Has anybody else had this problem?
Thanks
100% without charging forever. its my dream
I've had the same problem. Check baseband and RIL. Try to use program "GetRIL" [market] and check is your baseband and RIL are the same. If not then you can download 'recomended' RIL and reboot.
Zde žil tapatolúček
Thanks, i restarted my phone and now the market is gone, baseband is unknown. A reinstall of the rom,and wiping everything,reinstall of baseband didn't work.
I'm gonna install the stock rom tommorow using smartflash. Hope that works
weebeast said:
Thanks, i restarted my phone and now the market is gone, baseband is unknown. A reinstall of the rom,and wiping everything,reinstall of baseband didn't work.
I'm gonna install the stock rom tommorow using smartflash. Hope that works
Click to expand...
Click to collapse
changes on IMEI ? *#06# ?
if you lost your IMEI try this LINK
Infinite power!!!!!
Baseband is always the same, no matter what rom you install BUT when you are changing a rom then "RIL" can change and that's why your problem was created after you install a new kang.
Now my baseband is 824 and its the best I've ever had. Good luck.
Zde žil tapatolúček
Albatros2605 said:
Baseband is always the same, no matter what rom you install BUT when you are changing a rom then "RIL" can change and that's why your problem was created after you install a new kang.
Now my baseband is 824 and its the best I've ever had. Good luck.
Zde žil tapatolúček
Click to expand...
Click to collapse
mate .. I lose mu baseband and IMEI too ....
xalix said:
changes on IMEI ? *#06# ?
if you lost your IMEI try this LINK
Click to expand...
Click to collapse
Thanks, I had no IMEI so i checked your link but i couldn't get the following too work:
1. Connect phone by USB
2. Enter 1809#*990# in dialer
So i downloaded a rom based on stock "DjangoManouche" and returned back too EXT3 and installed it. Everything is back to normal again. My IMEI is back, baseband is back, battery indicator is working again
Thanks all
weebeast said:
Thanks, I had no IMEI so i checked your link but i couldn't get the following too work:
1. Connect phone by USB
2. Enter 1809#*990# in dialer
So i downloaded a rom based on stock "DjangoManouche" and returned back too EXT3 and installed it. Everything is back to normal again. My IMEI is back, baseband is back, battery indicator is working again
Thanks all
Click to expand...
Click to collapse
Good to hear that You just got lucky. I tried a million combinations but only restore IMEI stuff from modaco helped me ...
Cheers ...
weebeast said:
Thanks, I had no IMEI so i checked your link but i couldn't get the following too work:
1. Connect phone by USB
2. Enter 1809#*990# in dialer
So i downloaded a rom based on stock "DjangoManouche" and returned back too EXT3 and installed it. Everything is back to normal again. My IMEI is back, baseband is back, battery indicator is working again
Thanks all
Click to expand...
Click to collapse
You have flashed a gb ril in cm7. Cm7 supports only froyo ril.
In fact if you don't do that, the rom is unable to read battery voltage and baseband version.
markop90 said:
You have flashed a gb ril in cm7. Cm7 supports only froyo ril.
In fact if you don't do that, the rom is unable to read battery voltage and baseband version.
Click to expand...
Click to collapse
Don't think that is the problem because i have done that many times and it always worked fine. I found out today that i couldn't send sms, if i tryed i would loose my connection etc.
Restarted my phone and now it doesn't start anymore, it's in a boot cycle lol.
Gonna install stock rom now
hmmm.. i wouldnt actually change that it would be like a dream to have an all the time full battery
Sent from my LG-P990 using xda premium
weebeast said:
Don't think that is the problem because i have done that many times and it always worked fine. I found out today that i couldn't send sms, if i tryed i would loose my connection etc.
Restarted my phone and now it doesn't start anymore, it's in a boot cycle lol.
Gonna install stock rom now
Click to expand...
Click to collapse
I repeat, CM is only compatible with froyo rils. Aremcee said that.
After installtion of ROM (without installing other APPS for ROM) mobile network was working fine and I was able to make/receive calls. I used it for couple of hrs, the only thing I noticed that I was not able to turn the WIFI on I thought this could be because of other apps so I installed other apps. Immediately after installing other apps network is gone even if I try to search network manually it says "Error while serching network" and still I can not turn my WIFI on. Any one else having same problem?
I reinstalled ROM to check this and again same problem. No network & No WIFI.
About wifi, it's said in the first post that it only works with static ip, although there's a fix for that, so i used it and my wifi is excellent now.
About the network, i really can't help you but mine is fine...Have you tried to wipe data before installing the rom again?
This ROM need nAa11 kernel to work ot of the box! Why you need alf's kernel?
Vicky26 said:
Have you tried to wipe data before installing the rom again?
Click to expand...
Click to collapse
Yes I did. Regarding WIFI, my problem is that I can not switch on the WIFI thus unable to fix wifi solution
didkoslawow said:
This ROM need nAa11 kernel to work ot of the box! Why you need alf's kernel?
Click to expand...
Click to collapse
Yes I know.... but in developer's thread I found many people are using alfs without any problem so used this one. Just now I tried flashing nAa11 trough 1st post but unfortunately flash tool is not showing this file in available kernel list??????
problem solved with nAa 11 and reinstallation without wipe
Hi guys,
i have been using Krarvind's Slim ICS 3.5 for about 10 days and I absolutely loved it. I have just updated to 3.6 which caused my phone to bootloop
So, after an hour or so of labouring and trying to work my way back in to it i'm now back on 3.5, but I have absolutely no signal/3G coverage. Wi-Fi works no problems, just no signal!
I went in to the APNs and there is nothing there - I tried to save a new APN and it wont let me - has anyone encountered this before?
Thanks in advance
Haven't experienced this myself but a few things come to mind...
First would be to check if you imei number correct? If not you would need to restore this from a backup.
If IMEI number appears correct then I would try flashing the modem again or a different modem. Modems found here: http://forum.xda-developers.com/showthread.php?t=1158783
If this doesn't work you can try flashing 3.5 base and essentials again.
If that doesn't work search the threads and google or hope someone else can give you an answer. If you don't find any help then as a last resort you can flash a stock rom with Odin although I'm sure there must be an easier way.
wondersteve said:
Hi guys,
i have been using Krarvind's Slim ICS 3.5 for about 10 days and I absolutely loved it. I have just updated to 3.6 which caused my phone to bootloop
So, after an hour or so of labouring and trying to work my way back in to it i'm now back on 3.5, but I have absolutely no signal/3G coverage. Wi-Fi works no problems, just no signal!
I went in to the APNs and there is nothing there - I tried to save a new APN and it wont let me - has anyone encountered this before?
Thanks in advance
Click to expand...
Click to collapse
I've had a similar problem, the updating to 3.6 just went wrong. No bootloop but loads of FC.
My solution has been going back to recovery, do a full wipe (wipe data/restore factory settings) and install 3.6 again. Everything seems to work now but I have to re-install and configure all my apps... :-(
Hope it helps...
Check in About > Phone
Under baseband does it say UNKNOWN ?
this happened to me once, need to reflash the modem. No need for wipes etc
Update: Solved (just reflashed the ROM)
I have a problem here with my X8. So, after I have successfully unlocked my bootloader without the network problem, now I have a wifi problem. So what I did was: rooted my phone, unlocked the bootloader, applied a nAa kernel (before that I tried the MiniCM9 with the ICS nAa kernel), then I applied the custom ROM called JoyOS... In both cases(ICS-MiniCM9, and JoyOS) I have the problem when connecting to a wifi router, I cant use it. I know it sounds strange but I can connect normally with the wifi but still I cant use it... I mean when I try to open google.. or use anything with wifi (like syncing) I just cant... it says unable to connect to the internet. I am thinking its the unlocked bootloader problem.. but I am not sure. Can someone help with this please.
Maybe just reset router...
lol???
Thats not a problem with the router... I am using the internet via that router writing this reply.. please dont be stupid and post something smart.
EDIT:
Still waiting for a reply.. I really need a solution for this..
Have u tried connecting to a totally different router cuz that may be ur problem, I have a friend who had a similar problem with an android tablet that didn't like his router so give it a go it won't hurt to try
P.S did it connect when it was stock?
Sent through my X8
it did connect when it was on stock ... and I am not sure but I think it actually was working a little while I was using the MiniCM9 ICS ROM and on the same rom actually the problem has occured. Now I am not sure if it stopped working because of the unlocking and applying a new kernel or something else happened in the mean time.. Could it be I disabled wifi somehow? somewhere?
What rom are you using? i only say that because when i swapped from minicm9 to semc debrand engine both wifi and 3g stopped working but when i switched back to minicm9 it worked perfectly again.
Try a Full wipe + wipe dalvic cache (or whatever it is) and install the rom again, hope this helps
Now trying to flash miniCm9 again.. we ll see now.. will update in a few minutes
Update:
Great, , just flashed the ROM again and now working well. Thanks anyway for helping.
No problem glad i could help