Related
Hey Guys,
I hope this is not a complete repost
I have a samsung Galaxy s i9000 and i installed a custom gingerbread 2.3.4 ROM yesterday, all worked fine, but was unable to receive phone calls so i tried reflashing my phone to see maybe it was installed incorrectly.
Im not able to get into recovery mode but i am able to get into download mode.
So i installed Odin, and a .pit file that someone recommended. earlier i downloaded a .tar file that was compatible with my phone.
Everything went fine and it said it was successful, but im now stuck on a black screen with nothing but download mode.
My question to you is:
What files do i need to download inorder to get it to boot, and then allow me to flash to a gingerbread version on android.
I have a 512.pit file, i just need all the other odds and ends like a PDA, phone, CSC files.
Please please help me.
Thanks you for your time.
The same thing happened to me I just flashed a stock rom using odin and haven't tried flashing anything else yet
Sent from my SGH-T959V using XDA App
falcons2 said:
The same thing happened to me I just flashed a stock rom using odin and haven't tried flashing anything else yet
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
hi,
The question is, where did you get your stock ROM from, what files did you use? cause I have no clue what files to use just to get the phone going again.
Thanks thou
I just went to the xda website and found the stock rom forum and then I just picked one and flashed it with odin
Sent from my SGH-T959V using XDA App
try to reflash back with another rom and with .pit dont forget to REPARTITION CHECKED
Sent from my GT-I9000 using XDA App
http://forum.xda-developers.com/showthread.php?t=846913
[REF] Stock Firmwares for Samsung Galaxy S I9000 series - Download Only
Sent from my GT-I9000 using Tapatalk
Thanks guys for all your comments, i have successfully flashed and got everything working, yes there is a BUT!!!!
its in a different language, its still in the setup mode, i dont want to do anything unless i know that i can change it.
anyone got a screeny for me of where and what icon to press to select English as my primary language.
Thanks
ok i found the problem, i downloaded a arabic/african version of the stock firmware, i wanted to ask, could i install a american or europe version?
or will my network not work.
Thanks
SLYLUX said:
ok i found the problem, i downloaded a arabic/african version of the stock firmware, i wanted to ask, could i install a american or europe version?
or will my network not work.
Thanks
Click to expand...
Click to collapse
im on indonesia (asia) use europa rom
Sent from my GT-I9000 using XDA App
Hey guys, i have a motorolla droid 3. xt862. I am running cyanogen mod 7 and it is rooted. i flashed the Blur_Version.5.6.890.XT862.Verizon.en.US file using stock recovery and now the droid 3 bootstrap is gone and wifi wont work. im stuck with cm7 which doesnt work. I would just like to go back to the way it was when i got it stock rom and everything. I have no interest in custom roms because absolutely nothing works and it is all very buggy. Please i need help urgently! i hope im not stuck
watermummy7 said:
Hey guys, i have a motorolla droid 3. xt862. I am running cyanogen mod 7 and it is rooted. i flashed the Blur_Version.5.6.890.XT862.Verizon.en.US file using stock recovery and now the droid 3 bootstrap is gone and wifi wont work. im stuck with cm7 which doesnt work. I would just like to go back to the way it was when i got it stock rom and everything. I have no interest in custom roms because absolutely nothing works and it is all very buggy. Please i need help urgently! i hope im not stuck
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1255198
Flash the correct SBF and you'll be set; back to normal
Thanks! ill give it a shot and let ya know!
Cameron6472 said:
http://forum.xda-developers.com/showthread.php?t=1255198
Flash the correct SBF and you'll be set; back to normal
Click to expand...
Click to collapse
The link i s broken and i haver under 10 posts so im unable to post on that forum to let him know this..
I found the same file somewhere else but when i apply pdate from sd card with the file it just gets stuck at that and nothing happens. It goes back to the recovery symbol with an arrow and thats it
watermummy7 said:
I found the same file somewhere else but when i apply pdate from sd card with the file it just gets stuck at that and nothing happens. It goes back to the recovery symbol with an arrow and thats it
Click to expand...
Click to collapse
Try with this instead
Trythe trhread in my signature.. has saved me maaaanytimes ans is in multiupload
Enviado desde mi XT862 usando Tapatalk
watermummy7 said:
I found the same file somewhere else but when i apply pdate from sd card with the file it just gets stuck at that and nothing happens. It goes back to the recovery symbol with an arrow and thats it
Click to expand...
Click to collapse
Apply update from SD card? You must be doing the wrong process. The SBF file is flashed on your phone in conjunction with the RSD lite Windows application
Cameron6472 said:
Apply update from SD card? You must be doing the wrong process. The SBF file is flashed on your phone in conjunction with the RSD lite Windows application
Click to expand...
Click to collapse
Yes thankyou, im still a learning noob lol. I successfully am back to gingerbread 2.3.4 for droid 3. Re-rooted got adw launcher and everythings works including the camera! That's the main reason I wont flash any custom roms even stable ones because camera just simply doesn't work. Thanks for everyones help on this forum! Id like to know some really cool mods and hacks I can do to this thing
watermummy7 said:
Re-rooted got adw launcher and everythings works including the camera!
Click to expand...
Click to collapse
Why did you need to root to install adw? or you just rooting to remove bloat?
watermummy7 said:
That's the main reason I wont flash any custom roms even stable ones because camera just simply doesn't work.
Click to expand...
Click to collapse
Hashcode's ICS rom has [mostly] working camera
Rooting mainly to remove bloatware and ads from applications. Also to overclock cpu thats about it. I had to use an sbf file because I was stuck in cm7 with no recovery and the wifi didn't work.
Sent from my DROID3 using XDA App
Cameron6472 said:
Hashcode's ICS rom has [mostly] working camera
Click to expand...
Click to collapse
Yeah I've tried the ics and it was really nice! Id just rather wait for a more stable release. Only problem I had with cm9 is some applications wouldn't open in fullscreen, it was weird..
Sent from my DROID3 using XDA App
do your wifi can turn on again?
zeigk said:
do your wifi can turn on again?
Click to expand...
Click to collapse
Yes, everythings working perfectly again
Sent from my DROID3 using XDA App
I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?
minnieman said:
I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?
Click to expand...
Click to collapse
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App
sahilarora2003 said:
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.
minnieman said:
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.
Click to expand...
Click to collapse
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App
sahilarora2003 said:
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?
You said your note came from repair and it was on download mode. I think it was NOT REPAIRED AT ALL. Country or region has nothing to do with manual flashing. You only need region when using kies to update.
Sent from my GT-N7000 using xda app-developers app
minnieman said:
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?
Click to expand...
Click to collapse
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App
sahilarora2003 said:
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!
minnieman said:
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!
Click to expand...
Click to collapse
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App
So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
---------- Post added at 01:22 AM ---------- Previous post was at 12:40 AM ----------
GeoJam3s said:
So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
Click to expand...
Click to collapse
Never mind... I got it. I had to update only via Kies. And then from there it pushed my original software. Thanks!
Stuck on Splash Screen. No recovery. Odin not able to flash roms.
sahilarora2003 said:
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.
Hello,
I have gotten the stock ICS rom from samfirmware.com, Installed using ODIN and it all went green.
However, after restart the touch screen is not working !
I have tried the following:
1. First the Default (XXX) ICS rom
2. Second, the Actual ATT ICS rom
3. Flashed CWM and it is working
4. Then tried AOKP unofficial rom, not starting
No luck so far, any help is much appreciated please.
The touch screen was working after step 3?
Sent from my SAMSUNG-SGH-I727 using xda premium
wamaOnline said:
Hello,
I have gotten the stock ICS rom from samfirmware.com, Installed using ODIN and it all went green.
However, after restart the touch screen is not working !
I have tried the following:
1. First the Default (XXX) ICS rom
2. Second, the Actual ATT ICS rom
3. Flashed CWM and it is working
4. Then tried AOKP unofficial rom, not starting
No luck so far, any help is much appreciated please.
Click to expand...
Click to collapse
Do you know what rom you flashed from Sam mobile?
Sent from my SAMSUNG-SGH-I957
jd1639 said:
Do you know what rom you flashed from Sam mobile?
Sent from my SAMSUNG-SGH-I957
Click to expand...
Click to collapse
First was this one sammobile (dot) com /firmware/?page=3&model=SGH-I957&pcode=XXX&os=1&type=3#firmware[/url]
Then when it didn't work, tried this one
sammobile (dot) com /firmware/?page=3&model=SGH-I957&pcode=ATT&os=1&type=3#firmware
Sorry for the strange URL format, but seems as anew member I don't get to add URLs yet
orlandoxpolice said:
The touch screen was working after step 3?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Sorry, I meant the cwm recovery was flashed correctly and functioning
Btwi tried the fix permissions suggestion from the similar thread but no luck
What version of odin did you use? The roms look ok. If you didn't use ver 1.85 download that and re flash the Rom.
Sent from my SAMSUNG-SGH-I957
jd1639 said:
What version of odin did you use? The roms look ok. If you didn't use ver 1.85 download that and re flash the Rom.
Sent from my SAMSUNG-SGH-I957
Click to expand...
Click to collapse
It is the Odin version I have used,
One more note now, am not sure if that is normal if not.but after the latest flash ( preceded by a data wipe and format ) I can now see zip file I have placed on sdcard but can't access them for flashing and/or ad new zip files from pc
In cwm do a factory reset, wipe and format system and data and then boot. I'm hoping that will solve the problem.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
In cwm do a factory reset, wipe and format system and data and then boot. I'm hoping that will solve the problem.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Tried,booted, "SAMASUNG"screen only ( as expected sicne i formatted the system ), then re-flushed the ATT ICS and same output
Am trying to get a new ROM flashed, but when the device powers up [ without me going through the wizard ], i can't write anything to SD from my PC.
Any info around here about flashing CM or AOKP using ODIN for this I957 ?
Not with Odin that I'm aware of. All are zip files and would go thru cwm. If you get only to the Samsung logo, my experience has been a factory reset usually gets you past that and if that doesn't work flashing the stock rom with Odin does. And I'd flash the honeycomb rom and bring it back to they way I bought it, then upgrade to ics
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Not with Odin that I'm aware of. All are zip files and would go thru cwm. If you get only to the Samsung logo, my experience has been a factory reset usually gets you past that and if that doesn't work flashing the stock rom with Odin does. And I'd flash the honeycomb rom and bring it back to they way I bought it, then upgrade to ics
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Tried the honeycomb step, still same problem
As for Booting to samsung screen .. i did format /system as suggested, so there will be no system to boot to i think
I'm at a loss, you've tried everything that has gotten me beyond the boot screen.
Anyone else have any ideas?
Sent from my SGH-I727
wamaOnline said:
Tried the honeycomb step, still same problem
As for Booting to samsung screen .. i did format /system as suggested, so there will be no system to boot to i think
Click to expand...
Click to collapse
I should mention something that has gotten me worried, i flashed a TWRP recovery to check if the touch would work there, but it didn't.
Not sure if i should be worried about HW now, or try another TWRP for instance? Or perhaps TWRP shares another flawed tab wide configuration with the Android image ?
It's not twrp, I use it on my tab and it Works fine. If you were the only one who has this problem I'd say hardware for sure. But at least one other person has the same problem after updating to ics. It seems like there something with the firmware interfacing with the touch screen.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
It's not twrp, I use it on my tab and it Works fine. If you were the only one who has this problem I'd say hardware for sure. But at least one other person has the same problem after updating to ics. It seems like there something with the firmware interfacing with the touch screen.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Then why is it still borked when reverting to hc?
Sent from my SAMSUNG-SGH-I727 using xda premium
Good question. One of the guys couldn't get the touch screen to work in twrp either. It sounds like a hardware issue but to have a few guys have the same problem after installing ics? I don't know? Something's doing it which I can't figure out
jd1639 said:
Good question. One of the guys couldn't get the touch screen to work in twrp either. It sounds like a hardware issue but to have a few guys have the same problem after installing ics? I don't know? Something's doing it which I can't figure out
Click to expand...
Click to collapse
yea i dont get how a rom flash could cause a hardware issue
orlandoxpolice said:
yea i dont get how a rom flash could cause a hardware issue
Click to expand...
Click to collapse
Think the other colleague did say he found someone elsewhere who resolved the problem by reverting to an older backup he had, which gives me hope that this is no hw issue
And this was my first time to flash any ROM without a backup first, thought a stock update would be fine !!
Can I use adb for instance to verify if it was a hardware issue,if so then any help is appreciated
wamaOnline said:
Think the other colleague did say he found someone elsewhere who resolved the problem by reverting to an older backup he had, which gives me hope that this is no hw issue
And this was my first time to flash any ROM without a backup first, thought a stock update would be fine !!
Can I use adb for instance to verify if it was a hardware issue,if so then any help is appreciated
Click to expand...
Click to collapse
Got it Reassembled and cleaned it and it worked
same prob, touchscreen not responding
wamaOnline said:
Got it Reassembled and cleaned it and it worked
Click to expand...
Click to collapse
I'm having this issue of the touchscreen not responding on my s2 now
You say you got it reassembled? What did you have to do to repair it
any help greatly appreciated
I have JB 4.1.2 and cwm 9.1 flashed
after reboot screen comes on but won't respond to touch, I can only access download and recobvery screens
I also have the phone not showing on computer when usb attached but am loading rom etc to ext sd card first and installing them from cwm
Got the maintenance center to disassemble it, clean the pins and reconnect the screen and then it worked
Sent from my LT26ii using xda app-developers app
Hey guys,
Im extremely knew to the android world as I have always used an iphone.
I have a LG Optimus 2x that was stuck on Android version 2.2.2 as the LG Drivers didnt work so on android 2.2.2:
i rooted my phone, then flashed it with cmod 10 and google apps.
when i clicked "reboot device now" in recovery mode, the phone showed the lg logo then instantly it turned into two LG logos.
so now my phone doesnt turn on it instead just shows two lg logos side by side.
What have i done wrong? I hated android 2.2.2 as it was just too slow.
Help would be appreciated! Thanks!
Can you give me a link for that cm10 rom? Did you perform full wipe/factory reset in cwm before flashing the rom?
Sent from my LG-P990 using xda app-developers app
bitdomo said:
Can you give me a link for that cm10 rom? Did you perform full wipe/factory reset in cwm before flashing the rom?
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
the cm i downloaded was Android 4.2.2 CM10.1 ROM and i downloaded it from teamandroid.
i may have forgotten to do the factory wipe and the cache wipe before.
Thanks for the response,
Darren
anyone?
is my phone completely destroyed? can i get it back to normal?
dmariadas said:
anyone?
is my phone completely destroyed? can i get it back to normal?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=43489448&postcount=2 this should bring back your phone to life. I think I wrote down everything what you have to know. If there is something not clear or you don't udnerstand feel free to ask.
reflash the rom, i had the same problem somewhen