Here are a few cases that Cruzerlite sent me to review. I hope it will be useful for you all.
The Spi-Force rugged case is definitely a 10/10 for me. Not only do you have a nice fitting case that isn't bulky,
but theres a kickstand on the back! For $20, you just can't beat that.
Cruzerlite Spi-Force Case
The TPU case I would give a 3.5/4 out of 5. Only because I don't so much care for TPU cases anymore
but it is a nice and firm TPU. Again, not bad for $13
Cruzerlite Androidified TPU Case
I would like to thank Kristian B once again for sending me the cases to review for you all.
Make sure you check out Cruzerlite.com.
I'd also like to thank those of you who have been giving me good feedback,
and those who actually watched the videos and quickly decided which case you're ordering next.
Good review!thanx man..it does look like those china cases on e-bay..but this 1 must've a better quality..
..sent from my Behemoth N7100..
Related
Looking for a reasonably priced thin case.
Rearth Rinke Slim - Don't make one for AT&T yet
Incipio Feather - Don't want to pay $25!
Any others you recommend similar to those two? Not really looking for great protection. Just something to cover it a little. Would like it not to contact the glass when face down.
Thanks!
I have the diztronic tpu case and liked it. I bought the slim armor case as well because I wanted a bit more protection, but the diztronic worked fine to keep the screen off the surface of my desk and the same with the camera lens. It didn't add much bulk at all either. It can be found on amazon. Diztronic was about $8 and the slim armor case is $20.
Soundchasr said:
Looking for a reasonably priced thin case.
Rearth Rinke Slim - Don't make one for AT&T yet
Incipio Feather - Don't want to pay $25!
Any others you recommend similar to those two? Not really looking for great protection. Just something to cover it a little. Would like it not to contact the glass when face down.
Thanks!
Click to expand...
Click to collapse
Just ordered the Feather, really the only thin option for the Verizon G2
Sent in my phone because the charging port stopped working, and I'd like to buy a new case for my m8.
I am looking for something that looks decent and adds protection, with support for a tempered glass screen protectors.
I had a spigen case before this for a few months and the back is already scratched and looks very unappealing now.
Does anybody have recommendations?
I've always been a fan of UAG cases aka urban armor gear http://www.urbanarmorgear.com/.
Every so often they have specials going on as well.
I've been very happy with my Trident Aegis case. $20 on Amazon and offers excellent protection. I've dropped my phone several times and the case has held up well. I've had it nearly a year now with no issues.
Excessiveidling said:
I've always been a fan of UAG cases aka urban armor gear http://www.urbanarmorgear.com/.
Every so often they have specials going on as well.
Click to expand...
Click to collapse
This, I love my UAG case.
I have a ringke slim case black matte one from amazon... Been using it for a few months and works amazing! Catches mad oil though but one wipe and its clean
Otterbox symmetry
Check out the Amazon reviews.
I bought and reviewed 3 cases here in my post. I've since then ditched the dilex as it seems a bit bulky and have switched over to a black supcase unicorn beetle with a red body since i was replacing the usb/3.5mm board on my phone. http://forum.xda-developers.com/showthread.php?t=2728080 I hope that might be some help to you.
spigen hybrid. transparent, great materials, very strong
Yup, i think UAG has one of the nicest looking tough case out there.
Just wondering about cases for my OP3. Not really fussed about protection, mainly want something that doesn't really add anything size or weight wise to the phone but stops it being so slippy.
I was initially looking at the official protective case in Karbon - does that add grip? Also was thinking about the sandstone one which I know will add grip but have read that it's quite a polarising texture and actually feels a bit too rough (like sandpaper).
Are there any thinner, grippier/better cases than the official ones?
Thanks in advance
I have a bulky tudia merge and this one:
https://www.amazon.co.uk/Oneplus-Si...id=1470131177&sr=1-25&keywords=oneplus+3+case
Not really great protection (so it seems but never tried a real drop test lol), but it's very thin and feels grippy (rubberized) than op3 aluminium. Sort of ringke slim, if you know this case. Hope it helps
Oh, and it's perfectly compatible with orzly tgsp.
I have recently bought Carbon case. It definitely adds grip. It is covered with some kind of rubbery thing, so it feels nice in hand and is not slippery. It fits the phone very well and is thin. I can definitely recommend carbon case to you.
Diztronic should have A case out soon
I got carbon and sandstone, carbon feels better
Sent from my ONEPLUS A3003 using Tapatalk
[
This video of mine shows the fusion to be quite grippy!
I think i have paid under 20 dollars for 7 cases and 5 TGSPs. I have both found a sandstone and a clear Case and a full TGSP that are as Good/slim/protective as the 10dollar a piece some guys in here hav paid. I dont understand, Why pay so much Money?
http://s.aliexpress.com/7jeU7jEn
http://s.aliexpress.com/qm6fymQR
http://s.aliexpress.com/M7NFzARb
I got the Carbon with my Soft Gold. It feels awesome in the hand. I'm not so sure about full protection, though.
Hi, i`ve been searching for a transparent case for OP3. I want to buy the soft gold version, it looks really beauty. I don`t like to buy a beautyful phone to cover with a case and looks like any other phone. But i priorize protection too. I found a transparent case by Nilkin at AliExpress, but i don`t know if it`s a good case. What do you recommend?
Orzly Flexicase
The best transparent case which is also still pretty protective is probably the ringke fusion
https://www.amazon.com/gp/aw/d/B01HBZYWLE/
i agree with the orzly flex case, it does not give much bulk but can protect too
2x4 said:
The best transparent case which is also still pretty protective is probably the ringke fusion
https://www.amazon.com/gp/aw/d/B01HBZYWLE/
Click to expand...
Click to collapse
Ringke fusion is an amazing case for the money. I'm rocking it right now. I got the Pleson TPU case initially, but this Ringke just blows it out of the water. Very very well thought out. Probably the best TPU case I've ever owned for any phone. I religiously buy TPU as I have found it protects phones much better than any Otterbox, or anything with a "hard" cover. The hard covers all create a much higher impact in my personal opinion on the phone. The TPU absorbs the impact, instead of transferring it into the device. Never broke a single screen/phone wearing a TPU case, and I'm rough with my phones. I take them dirt biking on trails and on the MX course. I've crashed countless times. Never had a single issue.
The only thing a TPU case can't protect you from, is getting drunk and getting in the river and forgetting your phone was in your pocket. I'll miss you 1+1, I'll never forget you....
edit: hey, i'm in ATX too! hello 1+3 friend
sHockz420 said:
Ringke fusion is an amazing case for the money. I'm rocking it right now. I got the Pleson TPU case initially, but this Ringke just blows it out of the water. Very very well thought out. Probably the best TPU case I've ever owned for any phone. I religiously buy TPU as I have found it protects phones much better than any Otterbox, or anything with a "hard" cover. The hard covers all create a much higher impact in my personal opinion on the phone. The TPU absorbs the impact, instead of transferring it into the device. Never broke a single screen/phone wearing a TPU case, and I'm rough with my phones. I take them dirt biking on trails and on the MX course. I've crashed countless times. Never had a single issue.
The only thing a TPU case can't protect you from, is getting drunk and getting in the river and forgetting your phone was in your pocket. I'll miss you 1+1, I'll never forget you....
edit: hey, i'm in ATX too! hello 1+3 friend
Click to expand...
Click to collapse
hello from ATX! I had the pleson (clear) case first too, and while it's a great looking case I agree the best TPU slim case I've found is the Ringke one so far as well (and i've tried a good handful...)
I have the Orzly flexicase. It's look and feel is just great.
I've got the Pleson and the Ringke. It took some getting used to but I like my Ringke one more, harder plastic on back with tpu sides is nice
I have the Orzly Flexicase also. Love it. It isn't too thin or thick. I dropped my phone numerous times already. Haven't damaged it yet. (knock on wood)
I have a nillkin nature case since november, it's still great, not any scratch and protects my phone well, but it is becoming "yellowish", it's not as transparent as on the beginning.
Nillkins transparent tpu case is great. I"ve been using it since a few months. It's super slim compared to my other noname TPU case, has great grip dou to its sides. I've been using a case like this on my last 2 phones, will get one for the next one for sure.
I'm using stock just fine.
I am using Ringke fusion, it's nice but the rear is a fingerprint magnet.. It is getting dirty very fast.
I've bought orzly flexicase, will compare it with the Ringke one when I receive it.
Also for me the best is the Nillkin tpu case, very slim and transparent that show the device without cover it.
That cover have also a protection for the hole of type c cable.
For me official curved tempered glass with poetic affinity case is perfect
I have the spigen ultra hybrid and it's great. Also fits snugly with the orzly tgsp, no issues.
Loumier said:
Hi, i`ve been searching for a transparent case for OP3. I want to buy the soft gold version, it looks really beauty. I don`t like to buy a beautyful phone to cover with a case and looks like any other phone. But i priorize protection too. I found a transparent case by Nilkin at AliExpress, but i don`t know if it`s a good case. What do you recommend?
Click to expand...
Click to collapse
I've been using the official transparent case from OnePLus and it's good. No yellowish tint so far in 5 months.
I'm using spigen hybrid ultra clear case and it's incredible, fits really well and dust doesn't get under the case. Really good.
Fist off i tried a Cruzerlite case and not only was it a slightly baggy fit there was no camera protection at all, a shame really as the Bugdroid cases they used to make were brilliant. As this was being returned the Spigen case became available and it is far superior.
The Spigen Rugged Armor is an excellent fit, it feels at one with the phone if that makes sense and all the cut-outs are perfect and the camera module sits around 1mm below the surface of the case to offer it some protection, overall an excellent case that i would recommend to anyone without hesitation.
MrBelter said:
Fist off i tried a Cruzerlite case and not only was it a slightly baggy fit there was no camera protection at all, a shame really as the Bugdroid cases they used to make were brilliant. As this was being returned the Spigen case became available and it is far superior.
The Spigen Rugged Armor is an excellent fit, it feels at one with the phone if that makes sense and all the cut-outs are perfect and the camera module sits around 1mm below the surface of the case to offer it some protection, overall an excellent case that i would recommend to anyone without hesitation.
Click to expand...
Click to collapse
Any options for a belt clip holster?
Also what are your thoughts on some of the other Spigen cases for this phone
Sorry i have only used this Spigen case in particular but i cant praise it enough really, the fit is exceptional. The UK price for it was £9.99 and it was worth every penny really.
I forgot a link to it in the first post.
https://www.spigen.com/collections/...7t-case-rugged-armor-1?variant=30366585094191
It's a decent case but do wish the back (bottom) was a bit thicker to provide a greater recess for the camera circle. At $11 on amazon it's a bit pricey, but spigen materials and fitment is top notch. 4/5 stars.
I have always been using Spigen case with my OP2 and OP5T. Their cases are perfect. This time I went with OtterBox clear case as I wanted to see the blue back. Perfect fit.
Anyone know if it is compatible with Original Oneplus 7T 3D Tempered Glass Screen Protector?
Or any of the Spigen cases are?