Related
Apologies, but since I am a new user, I was not allowed to post in the thread in developer section.
I had bought a pre owned phone, on Rocket ROM (GB based), however as S-Pen apps were not working I decided to go on the stock ICS rooted way.
I followed the instructions here:
http://forum.xda-developers.com/showthread.php?t=1424997
I had downloaded the stock INdian ROM
N7000XXKK3 ------ 2.3.5 2011 November------ N7000ODDKK1 ------------------------India -------------------------Download
Click to expand...
Click to collapse
I followed the steps, downloaded Odin, and put the TAR file in PDA section, and flashed. All goes fine without error, on the phone it says everything is installed successfully. However after the process the phone just keeps restarting after the Samsung logo.
Have I done anything wrong here? How do I rectify the mistake and get my phone working
Did you clear cache/dalvik or do a wipe in recovery menu ? Looks like it's stuck because of leftover data from previous rom
Akiainavas said:
Did you clear cache/dalvik or do a wipe in recovery menu ? Looks like it's stuck because of leftover data from previous rom
Click to expand...
Click to collapse
Umm, pardon my ignorance as I am migrating from an ancient Nokia device.
No, I had done no such thing, no backups too as I just had it for a few days and no data so to speak of.
Should I be doing a wipe in recovery menu? And doesn't flashing the device, formats the memory too?
I think it should, but for some reasons it does not. To get rid of boot loop, go into recovery and clear cache. Should boot properly then
Also, avoid doing a factory reset on stock ics. If clearing cache wont help, i'd suggest flashing gb stock rom, doing a wipe and then upgrading to ics as wiping under ics has caused people a lot of troubles.
Yes you should do a wipe of cache memory and dalvik cache. That is availible from recovery menu. And no they arent allways formatted when flashing a new rom.
To go into recovery, do this.
Device off > vol-up+home+power. And now you are in recovery mode.
Also, avoid doing a factory reset on stock ics. If clearing cache wont help, i'd suggest flashing gb stock rom, doing a wipe and then upgrading to ics as wiping under ics has caused people a lot of troubles.
Click to expand...
Click to collapse
Thanks, I had read up how much ever I could, and am pretty wary of the emmc bug. Thats the reason I am flashing to a GB based stock rom, and then the ICS stock rom.
The error I got earlier is by flashing to a Indian GB Stock ROM, should I yet clear cache memory in the recovery mode?
A little bit of googling tells me I should be flashing to a ROM with multiple files (different ones for PDA, Modem, CSC etc) hence I am also downloading the stock Europe based ROM. Now the query is would the stock Europe GB ROM, cause any issues to a Note bought in India?
Edit: I wiped the cache partition in recovery mode, but the bootloop persists. I will try flashing to the Europe GB ROM and update.
Thanks, folks was able to install the Europe stock GB ROM, which I later flashed to an Indian stock ICS ROM. I have rooted the phone by a very helpful guide by Dr Ketan, however I miss some of the functions available to me on the rocket GB based ROM. Especially an option to have a data on/off option in quick notifications.
What is the purpose of rooting the stock ROM? Can I delete the bloatware that comes pre-installed on the stock ROM, once the phone is rooted? If yes how?
Any safe custom ICS ROM's you guys recommend? If I am right the correct way right now seems to be to flash a safe GB based ROM everytime before you flash an ICS ROM? Correct?
Last but not the least, thanks to the folks who replied and guided me in the thread, XDA is a very resourceful place, if you search it thoroughly.
About notification toggles - they are available in some roms, in others - not.
As far as rooting is concerned - yes, you can delete almost all the bloatware. There is a thread with APKs that are safe to remove - check it out and feel free to delete everything you won't be using. How ? Simple file explorer with root capabilities will do. Here's the list, thanks to pulser_g2:
https://spreadsheets.google.com/spr...1gdDJRekl4QmkyNmIzUmRvX2h3UDVkQXc&output=html
Safe custom ICS ROMs - I'd say go for CM9. For me, AOSP is the only way to go with Android. If you want TouchWiz based roms, however, can't really help cause i've never used them - there are plenty in development section though.
Nope, you don't need to flash GB ROM everytime. The problem with wipe affects only stock ICS roms ( so with stock-kernel based roms from Samsung, yeah, that's recommended ). But if you're going to flash/change/update roms like CM9, Criskelo etc. there is no need to go back to GB everytime.
Hi i was on ICS stunner and flash via PC Odin Stock GB rom.
everything goes ok but now i'm stuck on Samsung logo (bootloop)
i have to do cache/dalvik wip but i have only stock recovery.
Is there any way to do that on stock recovery or i have to flash a CWM instead ?
And if i have to so how to do that ?
help guys
arturutrata91 said:
Hi i was on ICS stunner and flash via PC Odin Stock GB rom.
everything goes ok but now i'm stuck on Samsung logo (bootloop)
i have to do cache/dalvik wip but i have only stock recovery.
Is there any way to do that on stock recovery or i have to flash a CWM instead ?
And if i have to so how to do that ?
help guys
Click to expand...
Click to collapse
Download abyss from the following site:
http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.tar
Flash the file with PC odin then reboot into abyss recovery. You can then do the wipe.
If you need more information, go to this website:
http://rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall/
Hello,
I'm new at flashing but I recently bought a Samsung Galaxy Note, which already had Stock ICS on it.
Android Version: 4.0.3
Baseband: N7000XXLPT
Kernel: 3.0.15-N7000XXLPY-CL474507
Got brickbug confirmed that I am running a dangerous eMMC chip firmware. I bought this Note from eBay and I'm guessing the previous owner did a reset. It is still working and I had no trouble with it, so I guess I got lucky.
Since I would like to return to a safer kernel and install Paranoid Android I read myself into some threads but would like someone to review what I've gatherd:
Flash save kernel for ICS, for example speedmod kernel with PC Odin.
Device should reboot into ICS with new kernel.
Flash Gingerbread stock ROM for my country (germany) for example this one:
N7000XXKJ4 ------ 2.3.5 2011 october-------- N7000OXAKJ4 ------------------Germany (Debitel)
Device should restart wirh Gingerbread and an old Gingerbread kernel(?)
Root and install CWM using Dr. Ketans guide and batch file.
Follow instructions to install Paranoid Android v0.4 from CWM
I have some questions for this as well:
Speedmod kernel flashes CWM with it. Does that mean it flashes the kernel and the recovery partion, too? As I understood, the CWM works from inside the initramfs, which I thought got flashed with the kernel on the /system partion (or maybe the /boot partion) but not on the /recovery.
Does CWM disapear, when I flash another ROM?
I am pretty sure, that I am running a free (= open) Version of ICS on the phone. When I install a Stock Gingerbread ROM with a Carrier afterwards (like above the Debitel company), do I have to expect weired stuff?
I am running Win 7 64bit, and I would run Odin v1.85 with admin rights. Kies ist installed. Odin found the device, too.
Thanks in advance,
gador
Speedmod Kernel will install Kernel, CWM and Root - And is flashable via odin or mobile odin.
CWM will disappear if you flash a stock ROM via ODIN, If you flash a custom ROM through CWM you will keep CWM (may change depending on kernel from the ROM)
If you flash a branded ROM via odin, You will probably get a lot of carrier branded bloatware on the device, But if you are sim unlocked, you wont get any weird issues like network unlock codes and so on.
azzledazzle said:
Speedmod Kernel will install Kernel, CWM and Root - And is flashable via odin or mobile odin.
CWM will disappear if you flash a stock ROM via ODIN, If you flash a custom ROM through CWM you will keep CWM (may change depending on kernel from the ROM)
If you flash a branded ROM via odin, You will probably get a lot of carrier branded bloatware on the device, But if you are sim unlocked, you wont get any weird issues like network unlock codes and so on.
Click to expand...
Click to collapse
So I guess, I can go ahead and they're no fatal flaws in my procedure?
(And flashing stock ROMS overrides /recovery as well?)
Check the videos in ky sig once
Just to be safe
Erm, All ROMs are different so double check in the OP but you wont lose CWM if you switch between custom ROMs, Only a full firmware flash via ODIN will replace recovery. However there are many variations of CWM, All however do the same job
the instructions above are correct, But seem to be a more complicated way of doing it, It says to flash a safe ICS kernel, THEN flash GB ROM in ODIN ??? That makes no sense.
Anyway, What i would do is, Revert to GB via ODIN, Flash SpeedMod kernel (for GB not ICS), Load all the files on to your SD card, Boot into recovery, Do a full wipe, Along with cache and dalvik cache, Then install PA + Gapps + any other mods !
azzledazzle said:
Anyway, What i would do is, Revert to GB via ODIN, Flash SpeedMod kernel (for GB not ICS), Load all the files on to your SD card, Boot into recovery, Do a full wipe, Along with cache and dalvik cache, Then install PA + Gapps + any other mods !
Click to expand...
Click to collapse
would it then be necessary at all to install the SpeedMod kernel? I included it above to make sure, the kernel is safe, but when the Gingerbread Stock ROM overrides the kernel, do I have to flash the kernel afterwards?
I suggest you stay stock and dont do any factory reset or data wipe.
Then READ and read a LOT of the topics here.
All these suggestions of flashing this and that comes with a risk. And it does not mean that if it works for others will work the same way for you.
Sent from my GT-N7000 using xda app-developers app
Yes, thats why i thought the above steps where a bit confusing lol
Flash SpeedMod (or any other GB kernel for that matter) After flashing GB via ODIN
azzledazzle said:
Yes, thats why i thought the above steps where a bit confusing lol
Flash SpeedMod (or any other GB kernel for that matter) After flashing GB via ODIN
Click to expand...
Click to collapse
Does one need root before you are able to flash GB via PC Odin?
Sent from my GT-N7000 using Tapatalk 2
mrcarlxx said:
Does one need root before you are able to flash GB via PC Odin?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I'd say no. I mean, as I understand it, you're flashing the device in download mode. There is no need for a root user.
So, against my inner "good angel", who told me to wait for a new official firmware release, I went ahead and flashed away.
It all worked and here is what I did:
Flashed the Gingerbread Stock firmware from above with PC Odin, according to the guide in the second post of the Stock Firmware thread.
Restarted and got lots of force close issues.
Flashed the Gingerbread Kernel SpeedMod from here ("speedmod-kernel-n7000-k2-12-Odin.tar")
Rebooted, continued to have force close issues.
Rebooted into Recovery (which is now CWM, due to Kernel update)
Wiped cache, dalvik cache and did a factory reset
Rebooted into a fully working Gingerbread OS
Placed PA v0.4 and GApps onto my SD Card (from here)
Rebooted into CWM Recovery
Applied PA v0.4 from SD-Card
Applied GApps from SD-Card
Wiped Dalvik Cache, Cache and did a factory reset
Rebooted into a workind Paranoid Android OS.
Although the SpeedMod Kernel got overridden by PA, I still have CWM Recovery.
Did you root first? and did you get the yellow triangle through flashing with PC Odin?
PS
I'm still dead scared about flashing a ROM after messing up my last gnote, never ever had a problem with my desire...it's shook my confidence tbh :-(
mrcarlxx said:
Did you root first? and did you get the yellow triangle through flashing with PC Odin?
PS
I'm still dead scared about flashing a ROM after messing up my last gnote, never ever had a problem with my desire...it's shook my confidence tbh :-(
Click to expand...
Click to collapse
Well, the SpeedMod Kernel not only gave me CWM, but also root. According to PA Thread Install instructions, you would need to root your device prior to installing PA.
Yes, after flashing the SpeedMod Kernel, I got the yellow triangle, but since I bought this phone on eBay, without any bill to confirm warranty, I didn't really care about it.
I did not get a yellow triangle after flashing the official Stock ROM!
So I would hazzard to guess that this would not void warrany. (Also, in Download Mode, there was the little text saying: "Custom Binary: No" after flashing the Stock Gingerbread ROM)
So, if I were concerned about warrany, I would have a second look at Dr. Ketans guide, which describes the CWM+Root procedure without increasing the binary counter (at least I think so).
This way, you could get root and CWM after flashing to Stock Gingerbread.
I just had the problem, that Gingerbread wouldn't allow me to go into the Settings Tab to activate Debbuging, which you will need for Dr. Ketans method. (All processes were getting force closed)
If it is possible to wipe the caches and factory reset the phone with stock recovery, I think it would work. It should look like this then:
Flashed the Gingerbread Stock firmware from above with PC Odin, according to the guide in the second post of the Stock Firmware thread.
Restart to Recovery. Wipe Dalvik Cache, Cache and do a factory reset (You just flashed Gingerbread Stock, which should have given you a safer kernel)
Restart
Activate USB Debugging and untrusted sources.
Follow Dr. Ketans Guide on how to Root+ get CWM
Continue from step 8 above.
Since I consider myself a complete noob to the flashing business, someone should propably confirm, what I've just written. I wanted to be on the safe side and therefore flashed a known safe kernel again over Gingerbread, just to be sure (and to get root+CWM)
Hope that helped.
Well mine didn't :-(
I'm now cursing after my planned upgrade failed :-( I'm stuck at the yellow triangle boot screen wondering what to do
My sequence was
a) Unpack SGN, and it upgraded to ICS
b) read about all the dire warnings on ICS - and curse!
c) figure out how to flash speedmod and get root via the temp CWM - and I was pretty happy about this for a few days..
d) battery life seemed poor - so I wondered if the Abyss kernel would help
e) Went into Recovery - which appeared to be CWM (volume & on/off to navigate) and flashed the Abyss kernel and performed a wipe (assured that my SGN was safe with speedmod)
f) Now stuck at the yellow triangle boot screen - wondering what to do?
My recovery seems to be the touch screen version now - when I can get into it.
Suggestions please?
(My old nexus One wasn't this tricky!)
---------- Post added at 10:25 PM ---------- Previous post was at 10:02 PM ----------
Wll I reflashed speedmod with Odin - and at least it looks like its booting!... anxious minutes later.... well I/m back. I don't know what i did wrong - but |I don't want to repeat that in a hurry.
I'll wait for CM9 to come out with an approved kernel before messing further!
Hey,
I recently bought SGN and wanted to update to Kingdroid's custom ROM and so i did !.
My SGN was on Ginger bread 2.3.6,what i did was,
1.Root Note(ginger bread with Odin by following Dr.Ketan's guide)
P.S-i did the exact same thing as he mentioned in his guide.
2.Installed later CWM on recovery mode
3.Installed Abbys kernel..(rebooted to recovery later)
a.clear userdata/factory reset.
b.wipe cache
4.Installed Notemania v5.0
Now,the problem is,first time the installation process completed,BUT it did not install the complete thing i.e CAMERA icon was missing,Touchwiz5,and many more apps were missing.
So later i decided to overwrite by reinstalling the mod again.
1.i booted into recovery mode
2.WIPE DATA,CACHE
3.selected install zip from sdcard/notemania v5.0
after selecting install,the installer stopped its progression @ 80%(mounting system ,rootfs) and lagged for almost an hour,i rebooted into recovery mode and rebooted device and it booted,,BUT the installation dint not reach 100%.
STILL camera app was missing and many more.
ive tried installing/overwriting many times(like 10).. its stuck up @ 80%.. i even tried Notemania 4,4..no use, lags @ 80%.
How do i finish the installation and install the COMPLETE ROM PACKAGE(with camera app)?>>>>
Requesting help!! Sorry my first android,so Noob
You have to install stock ICS before flashing Kingdroid.
kopitalk said:
You have to install stock ICS before flashing Kingdroid.
Click to expand...
Click to collapse
But,the video on youtube(cursed4eva) shows that ROM can be installed when on GB too..
Well, you have been following that for many times without change right?
kopitalk said:
Well, you have been following that for many times without change right?
Click to expand...
Click to collapse
Everytime,ive tried to Overwrite it.. ive did not INSTALL Abbyss Kernel. DO i have to???i did that only for the first time.
i have a question
1.How can i get back to Unrooted stock ICS rom now?
To go back to stock unrooted ICS, you can flash stock ICS via PC Odin. Since you already know how to safely wipe using Abyss, you can do full wipe in Abyss before putting your phone into download mode and use PC Odin.
kopitalk said:
To go back to stock unrooted ICS, you can flash stock ICS via PC Odin. Since you already know how to safely wipe using Abyss, you can do full wipe in Abyss before putting your phone into download mode and use PC Odin.
Click to expand...
Click to collapse
So if i want to install STOCK ICS,
i have to flash to stock GB first,(via ODIN)
then wipe data,cache
and install stock ICS via odin right?? that's all i have to do?
Kongdroid
I tried various versions of the ROM, but this is the mentioning of the most versatile and best. We recommend warmly.
pavan33 said:
So if i want to install STOCK ICS,
i have to flash to stock GB first,(via ODIN)
then wipe data,cache
and install stock ICS via odin right?? that's all i have to do?
Click to expand...
Click to collapse
Yes, that's the recommended steps to safely and cleanly install stock ICS.
Just remember that full wipe in stock ICS is dangerous.
pavan33 said:
...that's all i have to do?
Click to expand...
Click to collapse
Reading the sticky threads with the warnings and tutorials might be the real "ToDo" (if you didn't do this before).
In posts like these here you only get short answers. They include the risk that you do not really understand what the poster meant.
There have been many posts here from members bricking their devices because they didn't invest a little bit time in reading.
I 'invest' a little bit time of answering
Sometimes some people like to reassure themselves by asking confirmation from others..like a second opinion, you know...
So,for getting back onto stock ICS i dont need to involve abbyss or any other kernels right??
just,odin, and 2 stock roms and wipe userdata?
pavan33 said:
So,for getting back onto stock ICS i dont need to involve abbyss or any other kernels right??
just,odin, and 2 stock roms and wipe userdata?
Click to expand...
Click to collapse
Just read this post from Dr. Ketan for installing stock ICS ROMs.
http://forum.xda-developers.com/showthread.php?t=1424997
Before installing any custom ROMs/Kernel, you need to read & re-read the instructions carefully. Any missed step will make your device nothing more than a paperweight. Also do read the stickies in the forum for flashing/rooting, etc., it will help you & also you may be able to help someone like yourself by pointing in the right direction.
As Kopitalk told, do not wipe when on ICS. Always be on a safe kernel (GB based preferred) first.
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
can you try go back to stock GB rom.. then upgrade to ICS and root using Dr Ketans method and then install Hydracore
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
jeetu1981 said:
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
Click to expand...
Click to collapse
Hot damn you guys are quick!
Silly me! :silly:
If I install any GB kernal can I then install CM10?
S-pen said:
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Alba Donzo said:
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Click to expand...
Click to collapse
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
S-pen said:
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
Click to expand...
Click to collapse
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
So the official CM10 kernel is a gb kernel? Because remember that is what I'm currently on.
And just to make sure I got you... wipe everything, install kernel (I don't understand what you mean by "go straight to rom flash"), but then not "reboot system", instead "reboot to recovery", then install CM10 rom?
Also, when you say a "full wipe" do you mean that it will erase everything like a factory reset and delete all my apps and everything else? And is there anyway to install CM10 without doing this or is that the only way?
Cm10 kernel is a jelly bean kernel, so gb rom will not run under it.
Full wipe does mean erasing everything. Coming from gb, there is no other way to install, you need a full wipe, remember, you're updating two full revisions of the os, so it's not surprising a full wipe is needed. If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Sent from my GT-N7000 using xda premium
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Click to expand...
Click to collapse
How original was that....
Sent from my GT-N7000 using xda premium
SpyderTracks said:
If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Click to expand...
Click to collapse
Once again, my phone is already rooted... I have mentioned this several times.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
Click to expand...
Click to collapse
You telling me that I can safely go straight to JB from my current GB rom and kernel?
I already have a "nightly" JB rom on my SD card, so just to be clear, all I do is go into CWM recovery, do a "full" wipe (how do I do that by the way?) and install the JB rom from zip?
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
AA1973 said:
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
Click to expand...
Click to collapse
Great! I am downloading the GApps for JB now. How do I install them? I understand that this is also done through CWM recovery, but how do I instal them? do I install the JB rom and reboot to recovery and then just install GApps from zip before rebooting system?
Also, does the full wipe have to be done in CWM recovery, or can I just do the normal wipe on the phone menu before entering recovery?
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
AA1973 said:
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
Click to expand...
Click to collapse
OK install ROM and then install GApps straight away, got it.
Just about the wipe, is it a simple one button wipe that wipes everything, or are there several things that I have to wipe independently? This is the part I'm not too sure about.
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
AA1973 said:
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
Click to expand...
Click to collapse
That's fine. I'll go into recovery and have a look. Thanks for the help that you did give anyway.
It worked! I have been messing around with my new Note on Jellybean and looking through all the settings. It doesn't have project butter (or at least the project wasn't very successful), but still miles ahead of Touchwiz.
Just want to extend a big thanks to everyone that has helped me out. Much appreciated.
Hey all,
Quite confused here, taking the advice from the older threads I flashed using odin the stock firmware which I got from samfirmware and followed the instructions. Everything installed correctly however the phone will not boot :S
I ticked only PDA in which I entered the md5 file.
Came from cm9 nightly and flashed United Kingdom (Carphone Warehouse) 2012 July 4.0.4 N7000XXLRK N7000CPWLP5
Any help is appreciated and needed urgently - Thank you.
-Shaizer
did you make a nandroid?
if you could get into recovery, (and you still have CWM) it would imply that you did not successfully flash the tw-based kernel.
no tw-based kernel means that a TW-based rom will not boot (unless you had hydracore)
buut... if you do have the stock ICS kernel on there, and try to flash anything, you could brick.
so best bet is to flash GB via odin, then flash CWM, SU, and then flash a custom ROM with a safe kernel in it.
pretty dangerous to even use stock ICS rom
when u say phone will not boot? is it blank or stuck on GT N7000 logo or the Samsung glowing logo?
Its stuck on glowing Samsung logo, I'm in download mode now - what is the best option for me? Might just flash GB rom
guitarplayerone said:
did you make a nandroid?
if you could get into recovery, (and you still have CWM) it would imply that you did not successfully flash the tw-based kernel.
no tw-based kernel means that a TW-based rom will not boot (unless you had hydracore)
buut... if you do have the stock ICS kernel on there, and try to flash anything, you could brick.
so best bet is to flash GB via odin, then flash CWM, SU, and then flash a custom ROM with a safe kernel in it.
pretty dangerous to even use stock ICS rom
Click to expand...
Click to collapse
How can I go into recovery to check that? I only know how to get into download mode.
Shaizer said:
Its stuck on glowing Samsung logo, I'm in download mode now - what is the best option for me? Might just flash GB rom
Click to expand...
Click to collapse
getting into recovery is the opposite of getting into download mode. use power button/ volume up/ home instead of power button/volume down/home
but IMO safest thing to do at all is to just get yourself onto a safe kernel before doing anything else.
flash yourself a stock pre-rooted GB ROM via odin.
http://forum.xda-developers.com/showthread.php?t=1535025
then read this
http://forum.xda-developers.com/showthread.php?t=1424997
this way you will ensure that you are on a safe kernel.
from there get yourself a working version of CWM and move on to whatever ROM you want.
are you trying to flash stock ICS for a service request for the phone, etc? you might be much better off with any stock-based ICS rom.
if after this you REALLY REALLY want a stock ICS rom, then use mobile odin to flash the ROM but use a 'safe' stock kernel with mmc_cap_erase disabled.
this is the closest you can get to bone stock but safe. (this will not even get you rooted).
another advantage of starting with pre-rooted GB stock and going from there is no raised flash counter either.
guitarplayerone said:
getting into recovery is the opposite of getting into download mode. use power button/ volume up/ home instead of power button/volume down/home
but IMO safest thing to do at all is to just get yourself onto a safe kernel before doing anything else.
flash yourself a stock pre-rooted GB ROM via odin.
http://forum.xda-developers.com/showthread.php?t=1424997
this way you will ensure that you are on a safe kernel.
from there get yourself a working version of CWM and move on to whatever ROM you want.
are you trying to flash stock ICS for a service request for the phone, etc? you might be much better off with any stock-based ICS rom
Click to expand...
Click to collapse
Doing this now, hope it works - using the GB rom from when I first rooted (from GB) so hopefully should work
its just a matter of doing a wipe cache and wipe dalvik and data wipe. but as u on ics u can't. unless u install a safe kernel. If you installing gb, then after that reboot into recovery
vol up + pwr + home and then do a data factory reset, wipe cache and all should be good
Shaizer said:
Doing this now, hope it works - using the GB rom from when I first rooted (from GB) so hopefully should work
Click to expand...
Click to collapse
it's possible, but quite unlikely, that you have already hardbricked your phone between flashing stock ICS via odin and the boot.
more likely than not you are fine.
next time remember to make a nandroid. and never flash stock ICS kernels (or especially flash anything while already on a stock ICS kernel). these are the top 2 rules of having an n7000. if you follow them in teh future you will never have any problems
and please thank me if my posts helped
FWIW there were reports of hard bricks using the new stock JB kernel too, as Samsung decided to patch the bug 'their own way', which didn't seem to work. so only thing which is 100% safe is when mmc_cap_erase is disabled
Ah Relief - Finally got the phone booted into GB rom. How can I now install the Stock unrooted ICS room? Can't I just upgrade using OTA? I'm selling the note on ebay so need it to be fresh ICS.
as the phone is in the boot loop its clear indication that it's a data corruption problem and not a brick at all. Just need that wipes after ics install on a safe kernel
guitarplayerone said:
getting into recovery is the opposite of getting into download mode. use power button/ volume up/ home instead of power button/volume down/home
but IMO safest thing to do at all is to just get yourself onto a safe kernel before doing anything else.
flash yourself a stock pre-rooted GB ROM via odin.
http://forum.xda-developers.com/showthread.php?t=1535025
then read this
http://forum.xda-developers.com/showthread.php?t=1424997
this way you will ensure that you are on a safe kernel.
from there get yourself a working version of CWM and move on to whatever ROM you want.
are you trying to flash stock ICS for a service request for the phone, etc? you might be much better off with any stock-based ICS rom.
if after this you REALLY REALLY want a stock ICS rom, then use mobile odin to flash the ROM but use a 'safe' stock kernel with mmc_cap_erase disabled.
this is the closest you can get to bone stock but safe. (this will not even get you rooted).
another advantage of starting with pre-rooted GB stock and going from there is no raised flash counter either.
Click to expand...
Click to collapse
nokiamodeln91 said:
as the phone is in the boot loop its clear indication that it's a data corruption problem and not a brick at all. Just need that wipes after ics install on a safe kernel
Click to expand...
Click to collapse
Thanks for this, you're right it wasn't a brick - I'm now on a safe GB rom but really want this note to be in a stock unrooted ICS rom for the person buying it off me.
Connect to kies and update. If not use the same ics rom and flash it using odin. This time phone will start.
Before that while on gb do a factory reset.. connect to pc and format internal storage for you to get rid of all data
edit:
post removed.
if you are selling it, then I guess bone stock (without even safe kernel) is the way to go
just bear in mind with my method it is possible to get onto stock unrooted ICS but with a kernel without the bug.
I am not 100% certain if the phone will update OTA with that kernel though, so I guess use the other method
guitarplayerone said:
with all due respect- this is not true.
yes, in the general case, this is a sign of a softbrick. and if he never mentioned a stock ROM, it would definitely be a soft brick
however, there have been folks with hard bricks who have had /system and /data partitions screwed up who have even booted all the way into the OS. yes HARD brick. implying that there are actual corrupted partitions.
updating to stock ICS rom will put the affected kernel right back on his phone.
flashing another kernel from the affected kernel brings chance of a hard brick. (yes even though hypothetically you are only flashing /boot. but would you really take that chance with /boot? there have been reports of other partitions besides /data and /system being messed up, FYI)
it makes much more sense to flash the ROM via mobile odin, which gives you the option to flash a safe kernel at the same time.
this way OP is never on an unsafe kernel.
just because very few people bricked from flashing a safe kernel off off stock ICS doesn't mean that it isn't possible.
Click to expand...
Click to collapse
So if I use the OTA install method, there is a risk of bricking my device? I really don't think the person buying my phone will fiddle around with roms and kernels - so what do you reckon I should do? Does mobile Odin download a safe kernel for me?
give it in stock gb only.. let. him upgrade
nokiamodeln91 said:
give it in stock gb only.. let. him upgrade
Click to expand...
Click to collapse
this
nokiamodeln91 said:
give it in stock gb only.. let. him upgrade
Click to expand...
Click to collapse
Hmmm this current GB rom is rooted though so you reckon its better to unroot it and just sell as GB? I didn't specify GB or ICS
Shaizer said:
Hmmm this current GB rom is rooted though so you reckon its better to unroot it and just sell as GB? I didn't specify GB or ICS
Click to expand...
Click to collapse
Flash stock GB over odin.
if you wanted to be nice to the user, you could flash a ROM with a CSC corresponding to whatever region they are located in. That way you can factory reset and it will show up in the language they are used to.
If he is on stock, it will automatically go look for updates and tell him he could update
guitarplayerone said:
Flash stock GB over odin.
if you wanted to be nice to the user, you could flash a ROM with a CSC corresponding to whatever region they are located in. That way you can factory reset and it will show up in the language they are used to.
If he is on stock, it will automatically go look for updates and tell him he could update
Click to expand...
Click to collapse
Might actually have to do that, this phone is european so it starts in German...since when did German become the EU language right?! We won the war