Related
Hey everyone, my phone is running 2.3.5 of Android and it is branded to Orange. My build number (and kernel version) is BVJVC. I cannot find the right cf root for me. There doesnt seem to be any for JVC. Can anyone help?
TarnWilliamson said:
Hey everyone, my phone is running 2.3.5 of Android and it is branded to Orange. My build number (and kernel version) is BVJVC. I cannot find the right cf root for me. There doesnt seem to be any for JVC. Can anyone help?
Click to expand...
Click to collapse
Are you planning on rooting to then flash a custom rom or do you just need root access?
If you are planning on changing roms then just flash a pre rooted firmware or one that has a root solution available.
What do you want cf-root for? If you want root to you can flash a custom ROM it doesn't really matter which one you use. If you want it to run you current stock ROM with root then it is better to run the correct one. I cannot find that one either. Good luck.
Sent from my GT-I9000 using xda premium
There's no cf-root for JVC. I've only found a french forum with a very tricky way to root... far easier to flash another ROM that has cf-root. But come on, let's have a little more fun... ICS!
I want to change rom. Can I just flash any rom compatible with galaxy s i9000 or do you have to have compatible kernels? I have seen tutorials where it says to flash to something specific before flashing to the final one. If it's possible can someone send me a link to a custom pre-rooted rom which I can flash straight away onto my phone?
Sent from my GT-I9000 using XDA App
most of the roms come with a kernel. You can then flash other kernels but these do need to be comparable. I have team oceans 4.2 for example. This comes with its own kernel but I have installed semaphore 0.9.1 which sheet a lot of testing has been the best fit for my use. Hope that makes sense. If you have something particular inn mind let us know and we can help more
Sent from my GT-I9000 using xda premium
TarnWilliamson said:
I want to change rom. Can I just flash any rom compatible with galaxy s i9000 or do you have to have compatible kernels? I have seen tutorials where it says to flash to something specific before flashing to the final one. If it's possible can someone send me a link to a custom pre-rooted rom which I can flash straight away onto my phone?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1533327.
This is a stock firmware and the Odin 512.pit that I use when going back to stock and root is easily applied. It is a good idea to save these on your computer if (or when) things go wrong .
Can I just flash a rom with its custom kernel over my orange stock rom and it's kernel? They don't have to be similar in any way? Also, so I don't need root access to flash a custom rom.
Sent from my GT-I9000 using XDA App
You will need root access to flash custom roms as most have to be flashed by cwm(which you will get when you root your phone)
This brings me back to my original problem, people told me to flash a rom with compatible CF-root, but to flash i need to root? So i am stuck in a little circle?
Or does this only apply to custom roms and not flashing stock roms?
You flash Cf-root with Odin. This gives you root. You then flash custom ROM through recovery on your phone. As mentioned above if you want root to flash custom ROM then you need root it does not really matter which cf-root you use. Just follow instructions in Cf-root thread then follow instructions from ROM thread you want to flash.
If you want to use stock ROM with cf-root then it needs to be compatible.
Sent from my GT-P7500 using xda premium
CF-Root info here: http://forum.xda-developers.com/showthread.php?t=788108
From thread:
Instructions (long)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached CF-Root-xxx-vX.X.zip
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select CF-Root-xxx-vX.X.tar
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
- Done (if it took you more than 30 seconds, you need practise!)
Help! I don't know which file to pick! The filenames confuse me!
First thing: don't panic! It's all rather easy, and you won't easily do something bad! I am personally attentive to use the exact same version as the ROM I am running, but it's not that important.
First, go to Settings -> About phone -> Build number. It should say something like FROYO.xxJPy. It's primarily the JPy that we are interested in. Try to match that with a download link available in this (and the next few) posts. Some of the downloads dont just have JPy file name format, but are called xx_xxx_JPy.
Find the one that is closest to yours, if yours is not present, and flash that one.
If you are just installing CF-Root to flash a custom ROM like Darky, make sure you have ROM Manager already installed, ClockworkMod flashed, then simply install the latest CF-Root, reboot once normally, then reboot in recovery and run the Darky update.zip. In this case it does NOT need to be a near match at all!
Before you start it is a good idea to download your stock rom or another one for your phone from here. http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa Then where it says region click your country.
I recommend getting everything you need before you start. So make sure you Odin, a 512 pit file & your stock rom with the PDA, Phone & CSC files. There are plenty instructions for getting back to stock if you search.
Next get the ROM you want & the kernel you want.
Now that you have everything you are ready to go.
My process is as follows.
1. Remove SD Card, some say to remove sim but I have never done this.
2. Turn on phone & turn on USB debugging.
3. Connect phone to usb & copy everything on my internal sd card onto my pc. (I have a samsung folder & create a folder with the date and put everything in there - just in case)
4. (USB) Disconnect your phone from your computer
5. shut down phone.
6. Follow cf-root thread instructions.
7. Unzip the attached CF-Root-xxx-vX.X.zip
8. Start ODIN
9. Click the PDA button, and select CF-Root-xxx-vX.X.tar
10. Put your phone in download mode (power on, volume down, home button)
11. (USB) Connect the phone to your computer
12. Make sure repartition is NOT checked
13. Click the START button
14. Wait for the phone to reboot
15. Done (if it took you more than 30 seconds, you need practise!)
Now you have root & cf-root. Restart phone. Next step is generally as follows.
1. Start phone.
2. Connect phone to pc.
3. copy files you wish to flash onto root of internal sd card. in my case team icssgs 4.2 & semaphore 0.9.1
4. (USB) Disconnect your phone from your computer
5. restart phone into recovery.
NB. Make sure to do a backup at this point and ensure you have a copy of your efs folder somewhere!!! - if for some reason your IMEI number is corrupted you will need this
6. factory reset & clear cache
7. advanced button -> clear dalvik cache.
8. back & choose install zip from sd card
9. choose zip from sd card.
10 .select the zip file (in my case team icssgs 4.2)
11. Choose yes- install... zip name
12. repeat steps 8-11 and select semaphore kernel.
13. factory reset & clear cache
14. advanced button -> clear dalvik cache.
15. reboot phone. Reboot can sometime take a while. sometimes you may need to do this twice.
Semaphore: http://forum.xda-developers.com/showthread.php?t=1468795
Team ICSSGS: http://forum.xda-developers.com/showthread.php?t=1398223
If no luck then reinstall stock rom using odin making sure to use all three files & pit file with repartition checked.
Please note I am still fairly new at this so it may not be perfect & you should always rather follow instructions from the thread of the ROM you wish to flash
Hopefully that's it. Don't think I left anything out.
TarnWilliamson said:
This brings me back to my original problem, people told me to flash a rom with compatible CF-root, but to flash i need to root? So i am stuck in a little circle?
Or does this only apply to custom roms and not flashing stock roms?
Click to expand...
Click to collapse
Ok, let's clear things up a little. Every rom has its own kernel, let's say the default kernel of that ROM. There are stock Roms, which are those official of Samsung. Those come with its own kernel, but not rooted.
Now: there are some stock roms, of which some guys have managed to modify its kernel just to be able to have root access, and to have a modified version of the recovery: ClockWorkMod recovery.
There are other kernels, though. Kernels that people develope to improve those default kernels that come with stock kernels. But improve performance comes with (perhaps) less stability (actually that's not completely true, as cooked kernels also improve stability, and are in general far better than stock ones). What is true is that not every cooked kernel works with every rom, you have to make sure it works with what you want.
You definitely don't need to have root access to flash, but you do in order to make those highly important security backups! You can have root without flashing kernel.
Now, what are those roms that flash over other roms...? Generally cooked roms are stock roms modified to improve them. But they still use a lot of the stock roms system, that's why cooked roms have to be flash only over that rom they are based on. You still don't need to be root to flash those roms, but generally you do need ClockWorkMod recovery, that's why you need to flash cf-root kernel prior flashing a cooked rom. Or perhaps the cooked rom do not come with a modified/rooted kernel and you still needs to change the kernel (but usually they already come with a rooted kernel)
Hope that helps you even a little to know what do you want to do!
Thanks for the help everyone. I am going to flash an unbranded stock rom to get out of this orange rom. Would this tutorial work to debrand my phone?
http://droidangel.blogspot.com/2012/01/i9000xxjvu-android-236-upgrade-for.html?m=1
Sent from my GT-I9000 using XDA App
Tutorial is fine...
Sent from my GT-P7500 using xda premium
How to upgrade P1000 to ICS using custom rom with
out a PC?
HELP PLEASE
PDA: XXJQ1
PHONE: XXJPZ
CSC: OXAJQ1
gingerbread.
I presume it was not rooted and has no custom recovery either?
well if you are rooted on a stock rom and have a valid Custom Recovery - such as overcome team, you can actually do it using GOO MANAGER (Available via Play Store - Or Market). Still, you need to be very careful not to brick your tab. You need at to read and follow threads on ICS (CM9 based). You should also understand that ICS has 2 different systems.. therefore read about what MTD is and EXT is.
If you are NOT rooted, and do not have Custom Recovery -- (Or don't even know what they mean).. it's like asking how to turn a Stone into a Diamond.
the pre-requisite of installing ICS on P1000 is (Learn it by heart):
1. Rooting
2. Install a custom Recovery (or you can install Overcome Kernel).
3. Understand about: RFS, EXT, and MTD.
4. Read threads by the CM9 team.
When you have done all those, you are ready to install. The only time you will need to use ODIN is when you install Overcome Kernel.
Note: Step 1 and 2 can be replaced by installing GB Stock Safe ROM on Overcome Team website. -- search around for it on the DEV forum.
Downloading the ICS ROM, and even flashing it can be done from GOO Manager (on your tab).
yeah.... i have rooted my phone,
priyana said:
I presume it was not rooted and has no custom recovery either?
Click to expand...
Click to collapse
Yes!!! My phone is rooted
yes!! i have root!!
yappoe said:
well if you are rooted on a stock rom and have a valid Custom Recovery - such as overcome team, you can actually do it using GOO MANAGER (Available via Play Store - Or Market). Still, you need to be very careful not to brick your tab. You need at to read and follow threads on ICS (CM9 based). You should also understand that ICS has 2 different systems.. therefore read about what MTD is and EXT is.
If you are NOT rooted, and do not have Custom Recovery -- (Or don't even know what they mean).. it's like asking how to turn a Stone into a Diamond.
the pre-requisite of installing ICS on P1000 is (Learn it by heart):
1. Rooting
2. Install a custom Recovery (or you can install Overcome Kernel).
3. Understand about: RFS, EXT, and MTD.
4. Read threads by the CM9 team.
When you have done all those, you are ready to install. The only time you will need to use ODIN is when you install Overcome Kernel.
Note: Step 1 and 2 can be replaced by installing GB Stock Safe ROM on Overcome Team website. -- search around for it on the DEV forum.
Downloading the ICS ROM, and even flashing it can be done from GOO Manager (on your tab).
Click to expand...
Click to collapse
Haha!! Turning rock into a diamond!! Funny
Thanks! I have rroot and I have read the threads at the development section,
And I have read in the AOKP 4.0.4 to go to overcome web page, which is my problem....
I do not understand what do I have to do in the overcome website.
I believe I currently have a stock ROM installed gingerbread 2.3.3
What I do next??
If you are already rooted, what you actually need to do is just download the Overcome Kernel on the website and flash it (and if I remember correctly, you will need to use ODIN on this -- but trust me it's not as difficult as it sounds -- in fact it will be over in less than 3 minutes).
Next,
If you are thinking of installing the AOKP, you can't get that from GOO Manager.
You will need to download the zip file from AOKP thread to your phone - can be done directly without PC, and flash you from CWM recovery menu (Power + Volume Up)
on the recovery menu, select "Install from SD Card".
Please remember to backup everything before installing new ROM.
Please Don't forget to do Factory Wipe and Cache Wipe before flashing. (I remember they have it in their scripts, but better safe than sorry).
During install of the latest build (MTD), you will be in a loop and your tab would seem to be bricked.. just reboot it back to the recovery menu, and redo the install. (it's specified in the threads if you read carefully).
You will enjoy your new ICS, as if you just bought a new tablet.
--Sorry for the early joke -- I do have a weird sense of humor
thanks pal!!!
yappoe said:
If you are already rooted, what you actually need to do is just download the Overcome Kernel on the website and flash it (and if I remember correctly, you will need to use ODIN on this -- but trust me it's not as difficult as it sounds -- in fact it will be over in less than 3 minutes).
Next,
If you are thinking of installing the AOKP, you can't get that from GOO Manager.
You will need to download the zip file from AOKP thread to your phone - can be done directly without PC, and flash you from CWM recovery menu (Power + Volume Up)
on the recovery menu, select "Install from SD Card".
Please remember to backup everything before installing new ROM.
Please Don't forget to do Factory Wipe and Cache Wipe before flashing. (I remember they have it in their scripts, but better safe than sorry).
During install of the latest build (MTD), you will be in a loop and your tab would seem to be bricked.. just reboot it back to the recovery menu, and redo the install. (it's specified in the threads if you read carefully).
You will enjoy your new ICS, as if you just bought a new tablet.
--Sorry for the early joke -- I do have a weird sense of humor
Click to expand...
Click to collapse
Hey again...... hahaha
I like to know if I flashed the overcome kernel, I will have the ICS instantly?? Without doing anything else??
And I would like to know also about the GOO manager and how do I have ics with that thanks!!!
Restock?
Do i have to restock?
No and no.
You don't get ics by flashing overcome.
No you should not need restock. Although it is preferred to restock using overcome package
But you need a PC since you need Odin.
Basically
1) restock or have a good base gb rom.
2) use Odin to flash just overcome kernel.
3) boot into cwm recovery that is included in overcome kernel.
4) flash aokp or cm9 from sdcard using cwm
5) flash gapps.
Sent from my GT-P1000 using XDA
@priyana
Thank you very much!!!!!!
Now my mind's clear!!
Can I use the mobile version Odin? I found it on the play storw.
I have never used it. If it is as good as it advertise then it should do the job.
Sent from my GT-P1000 using XDA
Btw,
If you need overcome guide and missing the images on the website,
Look at this post.
http://forum.xda-developers.com/showthread.php?p=20974872
Sent from my GT-P1000 using XDA
I downloaded it just now and it looks like it will work! Ill go ahead and give it a try!!
Hey!! It works!!! Now I flashed the overcome kernel & i now have cwm recovery! Thanks!
(i used the mobile ODIN)
Then? What do I do next? Which do u prefer? AOKP or the CM9 ROM?
congrats.
Very encouraging indeed. I might consider getting mobile Odin, to escape the hassle of using a PC too. Nice find.
I am on AOKP Milestone #5.
But it seems like CM9 has quite a few things going now, like a deep sleep thing that save batts, and also there is a Pdroid patch for it, that won't work with AOKP.
But AOKP has nice ROM Control tweaks.
Your pick.
Remember to put them on sdcard together with gapps.
One thing you should note:
when you flash the ICS package, your tab will reboot to recovery again (some mistook it as a brick-like boot loop). It is actually booting into the recovery that comes with the the ICS flash.
It will be slightly different from the Overcome one,
and the external sd will be called internal sd instead. (at least that is what I found in AOKP, but I think both uses Humberos CWM recovery).
So choose to flash from "internal sd" even though it is external.
then after flash complete, flash the gapps.
Thank you, thank u sooooo much!! Haha
hey, i decided 2 go w/ the AOKP ROM.
which should I download?
The milestone 5 ROM?
or the build #33 ROM?
And what is gapps?
milestone #5 of course. that is the latest.
gapps is google apps: google Play Store, Google Finance, (used to be google Maps and Gmail, but more and more being made available via Play)
Google forbids people packaging their apps into a ROM unless it is mod of stock rom that already has it (like overcome is a mod if JQ1 rom).
You can find links to gapps in Stimp0z first post.
Do read the first 3 post and revisit it again later as it made more sense after you have played with AOKP for a while. That will avoid unnecessarily asking noob questions in the thread.
You can also get gapps from here
http://goo.im/gapps/
look for the gapps-ics-......
naturally grab the latest, but in fact older one is fine, and will likely get updated by Play once you are online.
Thank you priyana 4 ur help & support!
I will do the update now w/ AOKP Milestone 5 & update u later if it is sucessful or it bricked my tab!!!
Bye 4 now )
Heyyyy. Im DOWNLOADING the AOKP ROM many times, but its unsucessful!! What should I do?
Is it because you are downloading straight to tab.
Maybe the cache space not enough.
Better download on a PC and put to sdcard.
Anyway, hold back a day or two.
Build #35 coming.
Sent from my GT-P1000 using XDA
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
can you try go back to stock GB rom.. then upgrade to ICS and root using Dr Ketans method and then install Hydracore
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
jeetu1981 said:
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
Click to expand...
Click to collapse
Hot damn you guys are quick!
Silly me! :silly:
If I install any GB kernal can I then install CM10?
S-pen said:
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Alba Donzo said:
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Click to expand...
Click to collapse
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
S-pen said:
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
Click to expand...
Click to collapse
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
So the official CM10 kernel is a gb kernel? Because remember that is what I'm currently on.
And just to make sure I got you... wipe everything, install kernel (I don't understand what you mean by "go straight to rom flash"), but then not "reboot system", instead "reboot to recovery", then install CM10 rom?
Also, when you say a "full wipe" do you mean that it will erase everything like a factory reset and delete all my apps and everything else? And is there anyway to install CM10 without doing this or is that the only way?
Cm10 kernel is a jelly bean kernel, so gb rom will not run under it.
Full wipe does mean erasing everything. Coming from gb, there is no other way to install, you need a full wipe, remember, you're updating two full revisions of the os, so it's not surprising a full wipe is needed. If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Sent from my GT-N7000 using xda premium
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Click to expand...
Click to collapse
How original was that....
Sent from my GT-N7000 using xda premium
SpyderTracks said:
If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Click to expand...
Click to collapse
Once again, my phone is already rooted... I have mentioned this several times.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
Click to expand...
Click to collapse
You telling me that I can safely go straight to JB from my current GB rom and kernel?
I already have a "nightly" JB rom on my SD card, so just to be clear, all I do is go into CWM recovery, do a "full" wipe (how do I do that by the way?) and install the JB rom from zip?
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
AA1973 said:
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
Click to expand...
Click to collapse
Great! I am downloading the GApps for JB now. How do I install them? I understand that this is also done through CWM recovery, but how do I instal them? do I install the JB rom and reboot to recovery and then just install GApps from zip before rebooting system?
Also, does the full wipe have to be done in CWM recovery, or can I just do the normal wipe on the phone menu before entering recovery?
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
AA1973 said:
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
Click to expand...
Click to collapse
OK install ROM and then install GApps straight away, got it.
Just about the wipe, is it a simple one button wipe that wipes everything, or are there several things that I have to wipe independently? This is the part I'm not too sure about.
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
AA1973 said:
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
Click to expand...
Click to collapse
That's fine. I'll go into recovery and have a look. Thanks for the help that you did give anyway.
It worked! I have been messing around with my new Note on Jellybean and looking through all the settings. It doesn't have project butter (or at least the project wasn't very successful), but still miles ahead of Touchwiz.
Just want to extend a big thanks to everyone that has helped me out. Much appreciated.
Hi guys I'm new to the N7000 forums, but I am no means new to the android and flashing scene. I'm just a bit confused as to how to safely install ROM's on the note.
I've attached a screenshot of my "about phone" so you guys can tell me what kernel I should flash before installing different ROMs
The ROM(s) I'm interested in flashing are Jellybam, Sweet ROM (JB version) and Ultimate jellybean. Can these roms work with any safe kernel? i.e. once iv'e flashed philz or franco kernel I can let the flashing begin.
Also do I need to flash a safe kernel in order to install cyanogenmod or other, not based on stock roms?
Forgot to mention that I am rooted. Any help at all would be appreciated, if I am wrong about anything so far, feel free to set me straight.
Thanks to all who responded, if anyone else wants to reply feel free but i'm going to mark this as resolved so their won't be any confusion.
amd-dude said:
Hi guys I'm new to the N7000 forums, but I am no means new to the android and flashing scene. I'm just a bit confused as to how to safely install ROM's on the note.
I've attached a screenshot of my "about phone" so you guys can tell me what kernel I should flash before installing different ROMs
The ROM(s) I'm interested in flashing are Jellybam, Sweet ROM (JB version) and Ultimate jellybean. Can these roms work with any safe kernel? i.e. once iv'e flashed philz or franco kernel I can let the flashing begin.
Also do I need to flash a safe kernel in order to install cyanogenmod or other, not based on stock roms?
Forgot to mention that I am rooted. Any help at all would be appreciated, if I am wrong about anything so far, feel free to set me straight.
Click to expand...
Click to collapse
if you are on stock kernel then download Philz kernel for LP7, flash that in recovery, should give you root again aswell. then you can flash away to any of the ROMs you listed above. just every time you flash a ROM or think of factory reset or data wiping make SURE you're on a SAFE kernel. that's all
as you are rooted, just install any safe kernel like hydracore or philz. thats all. then you can try out any rom. Just make sure you follow the instruction to flash the rom in the OP
I saw that the Philz kernel has a lot of different versions, which one do I choose, am I right in saying the UBLPC one, as that is my build number? Or any one can work, I also read that you should not flash with the temp CWM, I will admit though I used the temp CWM to flash the root files and i'm still ok but I don't want to take any chances, how do I flash with the stock recovery?
amd-dude said:
I saw that the Philz kernel has a lot of different versions, which one do I choose, am I right in saying the UBLPC one, as that is my build number? Or any one can work, I also read that you should not flash with the temp CWM, I will admit though I used the temp CWM to flash the root files and i'm still ok but I don't want to take any chances, how do I flash with the stock recovery?
Click to expand...
Click to collapse
this is the one you use - PhilZ-cwm6-UBLPC-UUB-2.7
http://www.mediafire.com/file/35d4kd...2.7-signed.zip
the zip file mentioned above can be flashed using stock recovery. Put the file on ext SD card > boot into recovery > apply update from external storage > thats it
nokiamodeln91 said:
the zip file mentioned above can be flashed using stock recovery. Put the file on ext SD card > boot into recovery > apply update from external storage > thats it
Click to expand...
Click to collapse
First, forget about the franco kernel. The franco kernel for the Note is outdated and thus useless. Second, if you plan to flash a JB leak the only kernel you should use is PhilZ. And especially important with the JB leaks is to stick exactly to the instructions how to flash. Otherwise your phone won't even boot.
Have fun with your device! The Note is still an outstanding phone.
Sent from my revived Galaxy Note
Thanks guys for the quick replies, i'm gonna flash the philz kernel now and give the leaked version of JB a try.
make nandroid backup 1st..
Hi,
I own a Galaxy S Advance. It came with Gingerbread and then I updated it with Jelly Bean using Kies.
I have not installed any non samsung android OS on my phone.
By now reading the way I have written my post, you would have realized I dont know anything about cusotm rom's or rooting etc etc.
I am tired of the slowness of my phone. I want to give CM 10.2 a try. I have backed up all my data. I know there exists a way to revert to original Samsung OS incase I have any issues with the CM 10.2.
I dont know how to proceed to install CM 10.2 on my phone.
If some one can please guide me through the process I will be thankful.
Download ftom here: http://d-h.st/UVl
Then follow instructions from 1st post of cm10.2 thead. You have link in my sig.
Now i am not sure if it will work on stock recovery.
Search for root jb on the forum. Thread by shaan.
Install cocore kernel - link with download / instructions is in my sig.
Then proceed with cm instalation.
Sent from my SGS Adv. using xda-developers app.
th3cr0w said:
Download ftom here: http://d-h.st/UVl
Then follow instructions from 1st post of cm10.2 thead. You have link in my sig.
Now i am not sure if it will work on stock recovery.
Search for root jb on the forum. Thread by shaan.
Install cocore kernel - link with download / instructions is in my sig.
Then proceed with cm instalation.
Sent from my SGS Adv. using xda-developers app.
Click to expand...
Click to collapse
It will work without anything. Just with stock recovery. No need to root, CoCore.. Piece of cake.
But @kckinn if you want to use anything else, you will need to flash stock JB. You can't install any stock ROM or previous CM from CM10.2 (some partition is changed, so classic instalation or using backup will not work).
shut_down said:
It will work without anything. Just with stock recovery. No need to root, CoCore.. Piece of cake.
But @kckinn if you want to use anything else, you will need to flash stock JB. You can't install any stock ROM or previous CM from CM10.2 (some partition is changed, so classic instalation or using backup will not work).
Click to expand...
Click to collapse
Your replies are very much appreciated.
However, due to lack of my technical knowledge I could not make complete sense.
Here is what I understand.
1. No need to root or install cocore kernel prior to installing CM 10.2.
2. I need to download and save the zip file and gapps zip folders on my external storage and perform the following, as mentioned in the CM 10.2 post:
"Reboot on Recovery
Wipe Data / Factory Reset
Select "Install the Zip from External Storage"
Choose CM zip file
Choose GApps zip file
Reboot to system"
Here are my questions:
1. When it says "external storage", does it mean I need to have a external SD card. Or can I use the inbuilt 16GB space which the phone comes with.
2. Where should I download it from ? I can download it either from goo. im where the file name is "cm-10.2-20131025-UNOFFICIAL-janice.zip"or the link provided by th3cr0w where the file name is "cm-10.2-20131118-UNOFFICIAL-janice.zip ". As per my understanding "cm-10.2-20131118-UNOFFICIAL-janice.zip" is the latest nightly. So can I use the latest nightly directly or do I need to first install first from "cm-10.2-20131025-UNOFFICIAL-janice.zip" ?
3. In the last line of your reply you mentioned "But @kckinn if you want to use anything else, you will need to flash stock JB. You can't install any stock ROM or previous CM from CM10.2 (some partition is changed, so classic instalation or using backup will not work).".
I could not understand what you meant. Do you mean to say I need to flash stock rom before trying to install CM 10.2 or do you mean to say I will have to flash stock rom incase I want to revert to samsung JB?
I actually dont know what is meant by 'flash'. I once updated to gingerbread on an old galaxy phone which came with froyo using ODIN. Is that what is called 'flashing"
kckinn said:
Your replies are very much appreciated.
However, due to lack of my technical knowledge I could not make complete sense.
Here is what I understand.
1. No need to root or install cocore kernel prior to installing CM 10.2.
2. I need to download and save the zip file and gapps zip folders on my external storage and perform the following, as mentioned in the CM 10.2 post:
"Reboot on Recovery
Wipe Data / Factory Reset
Select "Install the Zip from External Storage"
Choose CM zip file
Choose GApps zip file
Reboot to system"
Here are my questions:
1. When it says "external storage", does it mean I need to have a external SD card. Or can I use the inbuilt 16GB space which the phone comes with.
2. Where should I download it from ? I can download it either from goo. im where the file name is "cm-10.2-20131025-UNOFFICIAL-janice.zip"or the link provided by th3cr0w where the file name is "cm-10.2-20131118-UNOFFICIAL-janice.zip ". As per my understanding "cm-10.2-20131118-UNOFFICIAL-janice.zip" is the latest nightly. So can I use the latest nightly directly or do I need to first install first from "cm-10.2-20131025-UNOFFICIAL-janice.zip" ?
3. In the last line of your reply you mentioned "But @kckinn if you want to use anything else, you will need to flash stock JB. You can't install any stock ROM or previous CM from CM10.2 (some partition is changed, so classic instalation or using backup will not work).".
I could not understand what you meant. Do you mean to say I need to flash stock rom before trying to install CM 10.2 or do you mean to say I will have to flash stock rom incase I want to revert to samsung JB?
I actually dont know what is meant by 'flash'. I once updated to gingerbread on an old galaxy phone which came with froyo using ODIN. Is that what is called 'flashing"
Click to expand...
Click to collapse
1. External storage is SD card that you put in your phone, not internal storage.
2. Search CM10.2 thread for that cm-10.2-20131118-UNOFFICIAL-janice.zip, no need to install previous one.
3. That is if you want to go back to stock JB or any other ROM. Flashing = installing. Yeah, just like that, with Odin. (beware, do not use firmware for NON P version, you have P version as I see (16GB)). And you might need to change tee folder look here: http://forum.xda-developers.com/showthread.php?t=2191628
I know it is pain in the... But nothing is easy in life.
shut_down said:
1. External storage is SD card that you put in your phone, not internal storage.
2. Search CM10.2 thread for that cm-10.2-20131118-UNOFFICIAL-janice.zip, no need to install previous one.
3. That is if you want to go back to stock JB or any other ROM. Flashing = installing. Yeah, just like that, with Odin. (beware, do not use firmware for NON P version, you have P version as I see (16GB)). And you might need to change tee folder look here: http://forum.xda-developers.com/showthread.php?t=2191628
I know it is pain in the... But nothing is easy in life.
Click to expand...
Click to collapse
Thanks for the quick reply.
I will try the process tomorrow after getting a SD card.
My phone is not the "P" version with NFC. Its the normal I 9070 but it came with 16GB.
kckinn said:
Thanks for the quick reply.
I will try the process tomorrow after getting a SD card.
My phone is not the "P" version with NFC. Its the normal I 9070 but it came with 16GB.
Click to expand...
Click to collapse
Ok, than forget that tee thing.
I also would like to go over to CM10.2. Currently on CoCore 8.2, but I am a little confused if I can flash CM over that. I see in the above discussion that it's desirable, but in post #2 of the CoCore thread, it says that CoCore only works with stock firmware:
Quote:
Q: What firmware does this kernel support?
A: All ROM bases on stock firmwares,all stock firmwares.
So, I'm not sure if i should go back to stock 4.1.2 and root it or go ahead with CoCore installed.
And, I understand from the above discussion that 4.1.2 doesn't need to be rooted to install CM, but of course it does have to be rooted to install CWM (or CoCore), as well as to use Titanium Backup (that's how I restore my apps). Where do I find CWM for this ROM/this device if I have to remove CoCore?
One more thing, I have 23 toggles installed on top of CoCore. Will they go away or interfere with CM10.2?
corvus.corax said:
I also would like to go over to CM10.2. Currently on CoCore 8.2, but I am a little confused if I can flash CM over that. I see in the above discussion that it's desirable, but in post #2 of the CoCore thread, it says that CoCore only works with stock firmware:
Quote:
Q: What firmware does this kernel support?
A: All ROM bases on stock firmwares,all stock firmwares.
So, I'm not sure if i should go back to stock 4.1.2 and root it or go ahead with CoCore installed.
And, I understand from the above discussion that 4.1.2 doesn't need to be rooted to install CM, but of course it does have to be rooted to install CWM (or CoCore), as well as to use Titanium Backup (that's how I restore my apps). Where do I find CWM for this ROM/this device if I have to remove CoCore?
One more thing, I have 23 toggles installed on top of CoCore. Will they go away or interfere with CM10.2?
Click to expand...
Click to collapse
installing cm will overwrite cocore with cm kernel....
just flash your CM...(make a nandroid backup first) and do a factory reset/wipe data...