Database Develop

[Q] Question about Flashing ICS

I want to Flash Team ICSSGS [Android 4.0.3] (Link to ROM Thread) but I am not for sure what Bootloaders or Kernel I need to use.
I currently have:
Firmware Version: 2.2
Baseband Version: I897UCKB1
Kernel Version: 2.6.32.9
Build Number: FROYO.UCKB1

In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.

WindRunnerXC said:
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
Click to expand...
Click to collapse
So that ROM I listed in my OP comes with its own Kernel?
And is there a particular Bootloader I should use?
If there is, may you please link me to it?

Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader

capocaccia said:
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
Click to expand...
Click to collapse
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?

froyo will still boot. GB BL are backwards compatible and the ISCSGS script should allow it to flash over any ROM

Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance

mrnapolean1 said:
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
Click to expand...
Click to collapse
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
gugman said:
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
Click to expand...
Click to collapse
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach

capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?

gugman said:
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
Click to expand...
Click to collapse
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.

capocaccia said:
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
Click to expand...
Click to collapse
i see. okey, thanx a lot again. will be able to flash in about an hour and will let you know

after flashing all went good and phone booted with no problem, except that i don't have a wi-fi, it is connected after typing my password in, wifi icon is on home screen, but could not enter any website or connect to my google account. any ideas?

Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS

capocaccia said:
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
so after flashing that file my phone gives me screen like this
Power Reset or Uknown Upload Mode
and it is stucked. so may i pull the battery off and go to recovery mode again and go back to my previous room? should i perform system format in this case?

Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS

capocaccia said:
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
with keys+power button combination i've been able to exit that screen and reinstalled 4.0.3
do you know safe way how do i go back to SimplyStock KK4 V1.0? should i first flash CornKernel_UCKK4_v603 with odin? but is it safe to do over android 4.0.3?
sorry for bothering you, but i am kind of stucked
---------- Post added at 02:52 AM ---------- Previous post was at 02:33 AM ----------
ok, in the end managed to boot the phone with working wifi but still would like to know how to flash back to SimplyStock KK4 V1.0, just in case ;-) if that won't be problem for you. thank you !!!

IMHO the best way to go from gingerbread to ics 4.0 is to
- in the development section download stock kk4 without bootloaders, unless you dont have them http://forum.xda-developers.com/showthread.php?t=1300843
- then download a kernel of your choice probably cornkernal and put it on your internal sd card
- download ICS latest build and gapps and put them on your internal sd
- oneclick odin the stock kk4, let it boot up completely
- power off and install kernal via odin without aut reset
- boot into recovery, factory/data reset, clean cache, clear dalvik, install latest ics, then install gapps right after,
- reboot system and youre done.
IF you want to go back to your other rom the simplest way is to just kk4 fresh install, install kernal via odin, then isntall your rom.
I always keep all my contacts synced with gmail, and titanium backup any game data or app data i need, and reinstall apps through the market.
hope this helps

capocaccia said:
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
Click to expand...
Click to collapse
Now can I go strait from Froyo to the ROM i listed in my OP?

okey, so at the end i decided to switch Doc's Master ICS and so far so good thank you all again for your support !!!!

mrnapolean1 said:
Now can I go strait from Froyo to the ROM i listed in my OP?
Click to expand...
Click to collapse
I gone ahead and flashed ICS onto my phone. It is working good but the Hang up button does not work. In order to hang up, i have to lock it and unlock it.
Now i did a Backup of Froyo from within CWM. if I do have a problem, can i go to DWM and restore the backed up Froyo?

[Q] abnormal error, can anyone help me?

Hi,
I as of yet, am not going close to any ICS build till the issue gets solved by someone.
so I am experimenting with different gb roms. i was using checkrom v6 but didnt like it, so followed steps to install darkyrom/alliancerom extreme edition. i followed the steps as I was told to install allianceota and flash the rom through there. it didnt work. so instead using cmw i flashed through recovery, it did flash but there no root.
so now, i reflashed a stock la6 rooted rom from here; http://forum.xda-developers.com/showthread.php?t=1535025
this went smoothly with no problems, so i installed allianceota as normal, this time when i try to flash the following messages come up:
Installing Multi-CSC
Can't access to '/system/CSC/KOR/system/'
Successfully applied multi CSC"
and then it gives me the option to reboot, wipe cache and a few other options, not full recovery mode.
shall i just reflash the rom through recovery, or am I doing something wrong? and does the slight error above mean I have a problem with my note?
cheers in advance.

Let me just say that almost every ICS ROM out there now has disabled the MMC_CAP_ERASE code in the kernel that activates the eMMc bug and bricks your phone. If you want stock ICS, you can use SpeedMod or Franco kernels. If you want AOKP, there is that now. If you want CM9, there's a bunch of variations plus the official CM9 nightly. If you read through the OP and stickies, you will be okay.
Are you on stock recovery still? It sounds like it from the error you are getting. Try flashing CWM recovery and installing the GB rom with that. Follow Drketan's thread in Android Development.

hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.

salespalace said:
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
Click to expand...
Click to collapse
I love ICS a lot more than GB. If you want to use stock ICS, I would just use Franco or Speedmod kernels with it and be safe. Read both of their forums and decide what you want to do.

I had the same problem with rom deodex i had flash with odin 1.85 firmware gingerbread here ; http://www.hotfile.com/dl/152168378/f76281c/N7000XXLC1_N7000OXXLB3_ATO.zip.html... then i made wipe cache and cache dalvick .

I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.

salespalace said:
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
Click to expand...
Click to collapse
-Flash a stock GB rom with pc odin
-Root it
-Go to cwm and wipe all (factory reset,cache and dalvik and then Install the ics rom that you like
-Reboot system and now it should work
Sent from my GT-N7000 using Tapatalk 2

[Q] Problem installing kernel. Please help.

Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.

can you try go back to stock GB rom.. then upgrade to ICS and root using Dr Ketans method and then install Hydracore

You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.

jeetu1981 said:
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
Click to expand...
Click to collapse
Hot damn you guys are quick!
Silly me! :silly:
If I install any GB kernal can I then install CM10?

S-pen said:
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.

Alba Donzo said:
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Click to expand...
Click to collapse
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?

S-pen said:
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
Click to expand...
Click to collapse
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.

Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
So the official CM10 kernel is a gb kernel? Because remember that is what I'm currently on.
And just to make sure I got you... wipe everything, install kernel (I don't understand what you mean by "go straight to rom flash"), but then not "reboot system", instead "reboot to recovery", then install CM10 rom?
Also, when you say a "full wipe" do you mean that it will erase everything like a factory reset and delete all my apps and everything else? And is there anyway to install CM10 without doing this or is that the only way?

Cm10 kernel is a jelly bean kernel, so gb rom will not run under it.
Full wipe does mean erasing everything. Coming from gb, there is no other way to install, you need a full wipe, remember, you're updating two full revisions of the os, so it's not surprising a full wipe is needed. If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Sent from my GT-N7000 using xda premium

Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.

chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Click to expand...
Click to collapse
How original was that....
Sent from my GT-N7000 using xda premium

SpyderTracks said:
If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Click to expand...
Click to collapse
Once again, my phone is already rooted... I have mentioned this several times.

chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
Click to expand...
Click to collapse
You telling me that I can safely go straight to JB from my current GB rom and kernel?
I already have a "nightly" JB rom on my SD card, so just to be clear, all I do is go into CWM recovery, do a "full" wipe (how do I do that by the way?) and install the JB rom from zip?

Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.

AA1973 said:
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
Click to expand...
Click to collapse
Great! I am downloading the GApps for JB now. How do I install them? I understand that this is also done through CWM recovery, but how do I instal them? do I install the JB rom and reboot to recovery and then just install GApps from zip before rebooting system?
Also, does the full wipe have to be done in CWM recovery, or can I just do the normal wipe on the phone menu before entering recovery?

You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...

AA1973 said:
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
Click to expand...
Click to collapse
OK install ROM and then install GApps straight away, got it.
Just about the wipe, is it a simple one button wipe that wipes everything, or are there several things that I have to wipe independently? This is the part I'm not too sure about.

Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.

AA1973 said:
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
Click to expand...
Click to collapse
That's fine. I'll go into recovery and have a look. Thanks for the help that you did give anyway.

It worked! I have been messing around with my new Note on Jellybean and looking through all the settings. It doesn't have project butter (or at least the project wasn't very successful), but still miles ahead of Touchwiz.
Just want to extend a big thanks to everyone that has helped me out. Much appreciated.

[Q] Read alot, can someone please confirm I am doing this right.|RESOLVED|

Hi guys I'm new to the N7000 forums, but I am no means new to the android and flashing scene. I'm just a bit confused as to how to safely install ROM's on the note.
I've attached a screenshot of my "about phone" so you guys can tell me what kernel I should flash before installing different ROMs
The ROM(s) I'm interested in flashing are Jellybam, Sweet ROM (JB version) and Ultimate jellybean. Can these roms work with any safe kernel? i.e. once iv'e flashed philz or franco kernel I can let the flashing begin.
Also do I need to flash a safe kernel in order to install cyanogenmod or other, not based on stock roms?
Forgot to mention that I am rooted. Any help at all would be appreciated, if I am wrong about anything so far, feel free to set me straight.
Thanks to all who responded, if anyone else wants to reply feel free but i'm going to mark this as resolved so their won't be any confusion.

amd-dude said:
Hi guys I'm new to the N7000 forums, but I am no means new to the android and flashing scene. I'm just a bit confused as to how to safely install ROM's on the note.
I've attached a screenshot of my "about phone" so you guys can tell me what kernel I should flash before installing different ROMs
The ROM(s) I'm interested in flashing are Jellybam, Sweet ROM (JB version) and Ultimate jellybean. Can these roms work with any safe kernel? i.e. once iv'e flashed philz or franco kernel I can let the flashing begin.
Also do I need to flash a safe kernel in order to install cyanogenmod or other, not based on stock roms?
Forgot to mention that I am rooted. Any help at all would be appreciated, if I am wrong about anything so far, feel free to set me straight.
Click to expand...
Click to collapse
if you are on stock kernel then download Philz kernel for LP7, flash that in recovery, should give you root again aswell. then you can flash away to any of the ROMs you listed above. just every time you flash a ROM or think of factory reset or data wiping make SURE you're on a SAFE kernel. that's all

as you are rooted, just install any safe kernel like hydracore or philz. thats all. then you can try out any rom. Just make sure you follow the instruction to flash the rom in the OP

I saw that the Philz kernel has a lot of different versions, which one do I choose, am I right in saying the UBLPC one, as that is my build number? Or any one can work, I also read that you should not flash with the temp CWM, I will admit though I used the temp CWM to flash the root files and i'm still ok but I don't want to take any chances, how do I flash with the stock recovery?

amd-dude said:
I saw that the Philz kernel has a lot of different versions, which one do I choose, am I right in saying the UBLPC one, as that is my build number? Or any one can work, I also read that you should not flash with the temp CWM, I will admit though I used the temp CWM to flash the root files and i'm still ok but I don't want to take any chances, how do I flash with the stock recovery?
Click to expand...
Click to collapse
this is the one you use - PhilZ-cwm6-UBLPC-UUB-2.7
http://www.mediafire.com/file/35d4kd...2.7-signed.zip

the zip file mentioned above can be flashed using stock recovery. Put the file on ext SD card > boot into recovery > apply update from external storage > thats it

nokiamodeln91 said:
the zip file mentioned above can be flashed using stock recovery. Put the file on ext SD card > boot into recovery > apply update from external storage > thats it
Click to expand...
Click to collapse
First, forget about the franco kernel. The franco kernel for the Note is outdated and thus useless. Second, if you plan to flash a JB leak the only kernel you should use is PhilZ. And especially important with the JB leaks is to stick exactly to the instructions how to flash. Otherwise your phone won't even boot.
Have fun with your device! The Note is still an outstanding phone.
Sent from my revived Galaxy Note

Thanks guys for the quick replies, i'm gonna flash the philz kernel now and give the leaked version of JB a try.

make nandroid backup 1st..

[Q] Help (Rooting/Brick issue)

I will try to be as detailed as possible. I have been long time user here, but this is the first time I'm posting. I usually read the instructions and posts and that usually suffices my needs. I was on a rooted galaxy note running chasmodo's assylum rom for quite some time now. For Flashing a new rom, I used to go to recovery mode, flash abbysnote kernel (v 3.9) and install a new rom. A few days ago i tried to flash Ezaechiel XXLT6 KM edition - V2.1. I guess I should have checked md5 of the downloaded rom coz after flashing it, my phone refused to boot up. It always took me to the recovery mode screen where i tried to install abyssnote kernel and reinstall assylum. but it didn't work. So I went to dr. ketan's post and tried to flash a pre rooted rom (SGN_XX_OXA_KJ1_FACTORYFS.zip) using pc odin. Now my phone works fine but i'm on ginger bread. I tried to flash new roms using recovery mode (abbyssnote kernel method) but no new rom can be installed. Everytime I try to install a new rom i face boot loop or get stuck on the setup screen. So I follow the PC odin method to flash the same pre rooted rom (SGN_XX_OXA_KJ1_FACTORYFS.zip) to get my phone working again. I would like to go back to assylumrom because i got used to aosp jellybean so much now. Anybody who has faced a similar problem in the past, please help

Use one of PhilZ kernels and then in his recovery prepare your device for a clean install (there is an option that does more than only "factory reset". With the old ones you didn't clean /preload.
Then follow the instructions to install your preferred Rom.

Thanks
ThaiDai said:
Use one of PhilZ kernels and then in his recovery prepare your device for a clean install (there is an option that does more than only "factory reset". With the old ones you didn't clean /preload.
Then follow the instructions to install your preferred Rom.
Click to expand...
Click to collapse
Thanks for the quick reply thaidai. I will try the method and get back to you I used to do a clean wipe every time.

Mate first upgrade your stock ROM to ICS or JB. The ROMs like Asylum aren't supposed to be installed in GB, so first upgrade, then root and do a full wipe (data,cache,preload,dalvik) and get back to flash the ROM. No need to flash the Abyssnote every time, why do you do that?

Varad297 said:
Mate first upgrade your stock ROM to ICS or JB. The ROMs like Asylum aren't supposed to be installed in GB, so first upgrade, then root and do a full wipe (data,cache,preload,dalvik) and get back to flash the ROM. No need to flash the Abyssnote every time, why do you do that?
Click to expand...
Click to collapse
I tried installing Cassies Xtraliterom XLC1 after the PC odin method. Got boot loop. What I'm basically saying is, after trying the PC odin method to rescue the device, I can't seem to install any other rom on it using the recovery mode route. Not even other GB roms. What am I to do??

Varad297 said:
Mate first upgrade your stock ROM to ICS or JB. The ROMs like Asylum aren't supposed to be installed in GB, so first upgrade, then root and do a full wipe (data,cache,preload,dalvik) and get back to flash the ROM. No need to flash the Abyssnote every time, why do you do that?
Click to expand...
Click to collapse
I started using abyssnote kernel to install new roms after the "brick scare" of last year after which a lot of developers started recommending the method. I used to change between GB, ICS and JB roms easily using the abyssnote kernel. Don't know why it's not working anymore.