Hi there! I was excited to get S5830IXXLK3_S5830IBTULK1_BTU firmware from samfirmware.com and flash it and use the latest custom kernel from Rafael.Baugis with it.
When I flashed 201212101860-E3-boot.img it completely killed my service. I enter the settings and it reports out of service. I says there is signal strength but I cant connect to the network or anything. I am on 3 (three) [H3G]
I tried 2 other custom kernels also: odin-kernel.tar from hell_lock (http://forum.xda-developers.com/showthread.php?t=20221470 and: PDAnitKernelNoSplash.tar from axyllum (http://forum.xda-developers.com/showthread.php?t=2026654)
Neither worked and did the same as Rafael's kernel. I thought a lot about it and tried flashing different basebands etc to see if that changed anything but to no avail I was stumped once again.
I went to a s5839i F/W from samfirmware.com S5839IBULE2_S5839IVOPLE1_VOP and the kernel works fine with that so in conclusion its the latest XXLK3 F/W that stops it working? Did Samsung 'fix' XXLK3 to not work with custom kernels? guess I go back to the old F/W and such :crying:
How can I solve this and get the kernel to work with XXLK3? I tried Alucard1989pl Deodex version of XXLK3 and same problem no service.
EDIT: Tried GT-S5830i Czech Republic 2012 November Android 2.3.6 S5830IXXLK2 S5830IXEZKL1 So far it works so its not the latest but its fine with the customs =D shame about XXLK3 though
I have a s5839i that came with stock BULE2 firmware
It now has XXLK3 (XXLK1 baseband) and it works fine with rafaelbaugis
Samsung will never "fix custom kernels", they directly allow people to modify their kernel by posting the sourcecode on their site
What country and carrier do you have?
Does the stock XXLK3 kernel give you service?
Interesting
ZakooZ said:
I have a s5839i that came with stock BULE2 firmware
It now has XXLK3 (XXLK1 baseband) and it works fine with rafaelbaugis
Samsung will never "fix custom kernels", they directly allow people to modify their kernel by posting the sourcecode on their site
What country and carrier do you have?
Click to expand...
Click to collapse
I am in the UK and my Carrier is H3G it is also the s5839i PAYG from three.co.uk it orginally had PDA: S5839iXXLD4 CSC: S5839iH3GLC2 MODEM/Phone: S5839iNELD1 but I lost that as I could not/or know how to back up from the phone as its my first Android device and indeed first smartphone too.
Maybe there is a particular bug with my firmware? though, neither XXLK3 nor the deodexed one worked, then again maybe its the CSC?
ZakooZ said:
Does the stock XXLK3 kernel give you service?
Click to expand...
Click to collapse
Yes. I would not have even bothered flashing the custom if it did not
I went to S5830i firmware to get CWM recovery using the David Jacket method but that was the only time it worked as the latest CWM kernels from Raf don't work on my device they jus stick on first screen. The e3 ones are ok though. Kinda buged me as I bought the CWM recovery pro app when I had it enbedded and working not I cant use :crying:
I'm sure there is a bug with this firmware, also see this thread. dNik17, the reason you can't get service even though you have signal is because for some reason, Android refuses to read our device's IMEI number on XXLK3. When your service was dropping out, if you had looked at your IMEI number in phone settings I can pretty much guarantee you it would have been blank at that time.
I have experienced this problem with the stock XXLK3 kernel as well as Rafael's and Hell Lock's. It does seem to be somewhat kernel dependent (and also possibly ROM dependent), for instance if you flash between stock and custom kernels it often fixes or recreates the problem. If you go into testing mode and turn off the radio and then turn it back on that sometimes fixes it also.
However, I think I may even have experienced it with stock ROM, stock kernel. I tried lots of different variations of ROMs and kernels in an attempt to nail down what exactly is going on but the issue seems to be quite unpredictable at times and difficult to repeatedly reproduce. I do know that XXLK3 has an updated stock kernel so I don't know if that has anything to do with it.
XXLK2 was fine and had no such problem.
@makeyourself thanks for the info! I am currently reverted to XXLK2 with latest Rafael.Baugis, I gave up hope of it working properly xD. I did have a back up of the partition with the IMEI info in but I did not try restoring it. I backed it up using galaxy toolboox.
I see your cooking a rom!!! good luck with that, I have tried using the kitchen a few times and but I cant seem to get the rom imported properly from the stock rom from samfirmware. I wish you more luck than I had!
dNik17 said:
@makeyourself thanks for the info! I am currently reverted to XXLK2 with latest Rafael.Baugis, I gave up hope of it working properly xD. I did have a back up of the partition with the IMEI info in but I did not try restoring it. I backed it up using galaxy toolboox.
I see your cooking a rom!!! good luck with that, I have tried using the kitchen a few times and but I cant seem to get the rom imported properly from the stock rom from samfirmware. I wish you more luck than I had!
Click to expand...
Click to collapse
Thank you mate, appreciate it :good:. Yeah I did use dsixda's kitchen just to kick things off and deodex the ROM. I use Debian, a Linux distro day-day anyway and I think that helps when it comes to extracting firmwares in tar format etc.
Yeah, the XXLK3 issue is a bit of an odd one, I don't think the efs partition is being corrupted or wiped as the IMEI number comes straight back if you switch kernels / ROMs / firmwares or occasionally just by effectively rebooting the phone. For whatever reason the ROM or the firmware is just refusing to read the efs information that is still sitting there intact. I'm sure someone will work out exactly what's going on soon anyway!
you flashed the "PHONE"(MODEM) in Odin? i think was the Modem.md5 , it comes from other country, i had that problem, just flash the Modem.md5 of my country (colombia)(MODEM_S5830M_WHLE2.tar)
carlos9545 said:
you flashed the "PHONE"(MODEM) in Odin? i think was the Modem.md5 , it comes from other country, i had that problem, just flash the Modem.md5 of my country (colombia)(MODEM_S5830M_WHLE2.tar)
Click to expand...
Click to collapse
No I don't think it can be that because I'm from the UK and downloaded the UK XXLK3 firmware. But also XXLK2 has the same modem and works fine.
Sent from my GT-S5830i using xda app-developers app
dagnabbit
makeyourself said:
No I don't think it can be that because I'm from the UK and downloaded the UK XXLK3 firmware. But also XXLK2 has the same modem and works fine.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
I tried many different modems as I thought that was the logical issue but none worked with the custom kernels and XXLK3. The only time I had XXLK3 working was on the stock kernel. I am guessing that there is some difference in XXLK3 kernel that is not addressed in the custom kernels yet.
I would concur that its a problem reading the IMEI.
XXLK2 (Czech) is working nice for me atm with XXLK1 modem.
I think its wise to stick with the XXLK2 firmware at the moment.
There is definitely something weird with the S5830i, when I flashed the deodexed lk3 from this site it simply refused to boot until I flashed the Rafael img and kernel. It does have perfectly fine service though.
Sent from my GT-S5830i using xda app-developers app
Viprdxd said:
I think its wise to stick with the XXLK2 firmware at the moment.
Click to expand...
Click to collapse
I agree its working nice for me at the moment. I am using the deodexed version from Alucard1989pl :highfive:
I've learned to stay away from custom kernels because each of them are unidimensional - developers use a source code from Samsung that's always incomplete and behind the release, and each dev. works for his device, that might be a S5830c (Rafael), a Chinese S5830i (hell_lock) or the more common among users here Indian S5830i. Guess what? each variant is different, something might work on one (phone book contacts, headphones, signal strenght, 3g) but not on others. That's why I don't approve the use of "universal" next to "kernel" - sure it boots all of them, but do everything works?
I would prefer kernel developers join the android kernel kitchen project, and find ways to add their mods there, so that every user could mod their own kernel.
When it comes to custom roms, you should never flash a full wiping package (repartition) that was not meant for your phone. Always Splitfus the new rom, and replace csc, phone and bootloader with your original ones.
Related
Hi everybody.
I just bought my very first tablet- a GT p1000.
Now, in the past few days I've been watching vids about CM9, which I find extremely cool.
As I gather, it is nowhere near completed yet tho.
So, in the meantime, could you suggest some decent looking and 100% working rom for my tablet?
You gotta admit, this forum is not very search friendly.
I have official Froyo installed as of right now, which is not very nice.
Thanks in advance and sorry for bothering ya'll.
Cheers.
just go to the dev thread and see the most popular posts there.
I think Overcome 4.1 is most popular.
You can try Hyperdroid and Accudroid too. All are GB ROMs.
Hi, I'm a newbie as well. Flash mine with Overcome 4.1 and then Hyperdroid a few days later.
My suggestion as a newbie is to use overcome 4.1 if u don't want to use stock rom.
I use Hyperdroid coz using Overcome, I have wifi disconnecting on it's own same like when I use stock GB 2.3.3
PS: Should u choose to use Hyperdroid, mind u it's a very slim rom, many of the standard app is not installed by default. But you can always install the removed applications manually. Hyperdroid has a zip file containing all the standard removed applications.
wuf31 said:
Hi, I'm a newbie as well. Flash mine with Overcome 4.1 and then Hyperdroid a few days later.
My suggestion as a newbie is to use overcome 4.1 if u don't want to use stock rom.
I use Hyperdroid coz using Overcome, I have wifi disconnecting on it's own same like when I use stock GB 2.3.3
CUT
Click to expand...
Click to collapse
Thanks both for the suggestions.
I checked both out already.
I also checked aestethic only personalisations via apps and themes and I have to say they're pretty nice too (might just do that while waiting for CM9 in a few weeks).
Is it true tho that official GB has wifi problems?
That's worrying, since I'll be using wifi most of the time.
Wifi issue is hit and miss.
Maybe it is wifi router dependant. Maybe 10%-20% has it.
I am fine using overcome 4.1 with 3 different wifi router.
Sent from my GT-P1000 using XDA App
wifi issue was 100% caused by belkin router.
If you do have belkin router, see this: http://forum.xda-developers.com/showthread.php?t=1441040&highlight=wifi
If you have different router, there shouldn´t be problems with wifi
DKStalker said:
wifi issue was 100% caused by belkin router.
If you do have belkin router, see this: http://forum.xda-developers.com/showthread.php?t=1441040&highlight=wifi
If you have different router, there shouldn´t be problems with wifi
Click to expand...
Click to collapse
Thanks for the info.
I have Netgear both at home & workplace.
Not a pressing matter after all anyway as I found out:
I managed to get a 3gb/month with no overlimit charge (only slower speed) for 5 euros/month. That'd should be plenty.
Pretty nice.
Sorry again, but what is the maximum size micro sd I could use on the P1000?
Is it 32 or 64gb?
Thanks.
Marcus.85 said:
Sorry again, but what is the maximum size micro sd I could use on the P1000?
Is it 32 or 64gb?
Thanks.
Click to expand...
Click to collapse
i think its only 16/32gb
i am a newbie as well.... 1st time android user.... bought the unit from my friend and am not sure if this phone is rooted or not... how will I know...
Here are the details on my unit.
Unit: Samsung P1000
Firmware Version: 2.3.3
Baseband Version: P1000DXJPC
Kernel Version: 2.6.35.7 / [email protected]#8
Build number : GINGERBREAD.DXJPC
Any advice on what to do before I root my phone... how will I switch back to my old O.S if I rooted my phone... I am from philippines and I read that there are different versions of baseband am I using the correct one???
Also tried updating my uni from KIES but it failed. Said failed to update... Any idea what happened?
Thanks and more power
klpangan said:
i am a newbie as well.... 1st time android user.... bought the unit from my friend and am not sure if this phone is rooted or not... how will I know...
Here are the details on my unit.
Unit: Samsung P1000
Firmware Version: 2.3.3
Baseband Version: P1000DXJPC
Kernel Version: 2.6.35.7 / [email protected]#8
Build number : GINGERBREAD.DXJPC
Any advice on what to do before I root my phone... how will I switch back to my old O.S if I rooted my phone... I am from philippines and I read that there are different versions of baseband am I using the correct one???
Also tried updating my uni from KIES but it failed. Said failed to update... Any idea what happened?
Thanks and more power
Click to expand...
Click to collapse
Hi,
Good starting point here http://www.teamovercome.net/p1000/?page_id=17
Cheers
Thanks mate... on going downloading....
Nubie too , just rooted my gt-p1000 yesterday with superoneclick ..
Now what should I do to flash a custom rom ?
How to get a custom recovery flashed in my gtab ?
Readed some pages & I've been noticed that ClockWorkMod recovery only a beta state and I've been searching for an answer on how to get cwm recovery but still no clear clue on it ..
schrickz said:
Nubie too , just rooted my gt-p1000 yesterday with superoneclick ..
Now what should I do to flash a custom rom ?
How to get a custom recovery flashed in my gtab ?
Readed some pages & I've been noticed that ClockWorkMod recovery only a beta state and I've been searching for an answer on how to get cwm recovery but still no clear clue on it ..
Click to expand...
Click to collapse
Hi
Here is a good starting point http://www.teamovercome.net/p1000/?page_id=21 and you dont need to change the CWM it works fine.
Cheers
thanks for the reply ..
I'm downloading all the neccesary files on the link above, still waiting for completing ..
the problem is I never flash this gtab before so it not containing any cwm recovery yet , so if flash with overcome would it gives cwm recover to my gtab ?
just notice few things on the link above ;
1. it contain gingerbread rom , my gtab already on gb , should I still do this ?
2. it have No_wipe & Wipe versions , which one should I use ?
is this just to get cwm recovery ?
schrickz said:
thanks for the reply ..
I'm downloading all the neccesary files on the link above, still waiting for completing ..
the problem is I never flash this gtab before so it not containing any cwm recovery yet , so if flash with overcome would it gives cwm recover to my gtab ?
Click to expand...
Click to collapse
Hi,
If you flash the gingerbread safe and the overcome kernel as descript in the how to you will get CWM.
Cheers
thanks for replying again ..
ok , then I only need to flash those 2 to get cwm ...
could you suggest me a custom rom ?
which one is the better with fewest bugs ?
schrickz said:
thanks for replying again ..
ok , then I only need to flash those 2 to get cwm ...
could you suggest me a custom rom ?
which one is the better with fewest bugs ?
Click to expand...
Click to collapse
I can't say, read the threads and take your favorite rom and flash that one first and try others as well before you setup your Phone to use it everyday so you will know what is available and works for you.
Cheers
thanks acubens ,,,
I've successfully flashed it ..
Now I had CWM recovery on gtab ...
schrickz said:
thanks acubens ,,,
I've successfully flashed it ..
Now I had CWM recovery on gtab ...
Click to expand...
Click to collapse
Good to hear it worked out for you , dont forget to try my rom
Cheers
Hi,
I have an issue about my phone.
It freeze when starting a call and it really long before the real screen show up.
Everything else work and even internet on wireless (not wifi)
I have try many different Radio and ROM and all act the same.
Anyone have an idea ???
Wrong section. Needs to be in Q&A.
Sent from my I9000 running Slim ICS 3.4 with Devil 2_0.72
Sorry...
But since it was from a modified ROM phone i was thinking it was here.
Moved the thread
Try re flashing ur modem.
I'm on ICS and use the UGKG3 modem, works great for me in BC
Kg3 in bc too works great.
You say you try different roms, but have you wiped, and reformatted it. I'd do that with a fresh odin flash with repartition. What firmware are you running? Maybe you could do with a firmware upgrade.
Sent from my GT-I9000 using xda premium
Hello,
I just wanted to try the stock ICS and hence flashed the LP8 for India. Dissatisfied, I wanted to revert to CM9, which I did.
However, ever since I did that GSM/WCDMA radio is not working on CM9, it however works on stock set up (checked it by flashing stock again) but does not work on CM9.
I hate to be on stock, kindly help me solving this.
anilisanil said:
Hello,
I just wanted to try the stock ICS and hence flashed the LP8 for India. Dissatisfied, I wanted to revert to CM9, which I did.
However, ever since I did that GSM/WCDMA radio is not working on CM9, it however works on stock set up (checked it by flashing stock again) but does not work on CM9.
I hate to be on stock, kindly help me solving this.
Click to expand...
Click to collapse
You mean you couldn't send sms???If so its known problem and there is fix in FAQ of cyanogenmod 9 discussion thread.I'll search and give the link if possible.If you cannot make calls too,I have attached a modem.Extract it and flash with mobile odin in modem tab.Its a GB modem.But now It is what I have
vijai2011 said:
You mean you couldn't send sms???If so its known problem and there is fix in FAQ of cyanogenmod 9 discussion thread.I'll search and give the link if possible.If you cannot make calls too,I have attached a modem.Extract it and flash with mobile odin in modem tab.Its a GB modem.But now It is what I have
Click to expand...
Click to collapse
Tried all that with no luck.
Just realized that, i cannot make calls over the stock ICS too. The radio just gets into emergency mode within 5 minutes of boot. Heading to service center.
anilisanil said:
Tried all that with no luck.
Just realized that, i cannot make calls over the stock ICS too. The radio just gets into emergency mode within 5 minutes of boot. Heading to service center.
Click to expand...
Click to collapse
Did you try my modem???
Man you just said heading to sc!!!!You have a custom rom....And dont you know abt Indian sc's????And you say it works on stock roms...So what will you say them???
vijai2011 said:
Did you try my modem???
Man you just said heading to sc!!!!You have a custom rom....And dont you know abt Indian sc's????And you say it works on stock roms...So what will you say them???
Click to expand...
Click to collapse
I am going to them with stock ICS only. As I said earlier, it is not working even for stock.
My mum has a Samsung Galaxy Ace and she is complaining about quick battery draining and low space. I figured the best thing would be is too update it from 2.3.3 too 2.3.6.
The problem is that Kies is saying that 2.3.3 is already the newest one, so I decided I will go on the internet and look for some official 2.3.6 ROMs. I found many, and the problem is that I don't know which to install not to mess anything up.
I found many people saying that they are stuck in boot loops and their phones lag even more because of the update. The question is: Which ROM shall I use? Right now my mum has 2.3.3 XWPKY and I want to update to one of the 2.3.6 ones.
I found many:
DDKQ8 (oldest one, boot loops apparently)
XWKTM (value pack, newest)
XWKPY (in the middle) which apparently is 2.3.6.... (people are saying it's actually 2.3.3).
Anyway, guys, which ROM do you use, if you have a official one? Any help is appreciated. Thanks.
Links to the ROMs:
http://www.android.gs/update-galaxy-ace-gingerbread-xwkpy-2-3-6/
http://www.android.gs/update-galaxy-ace-s5830-official-gingerbread-2-3-6-value-pack-xwktq/
http://www.android.gs/root-galaxy-ace-s5830-gingerbread-2-3-6-ddkq8/
domdomrys said:
My mum has a Samsung Galaxy Ace and she is complaining about quick battery draining and low space. I figured the best thing would be is too update it from 2.3.3 too 2.3.6.
The problem is that Kies is saying that 2.3.3 is already the newest one, so I decided I will go on the internet and look for some official 2.3.6 ROMs. I found many, and the problem is that I don't know which to install not to mess anything up.
I found many people saying that they are stuck in boot loops and their phones lag even more because of the update. The question is: Which ROM shall I use? Right now my mum has 2.3.3 XWPKY and I want to update to one of the 2.3.6 ones.
I found many:
DDKQ8 (oldest one, boot loops apparently)
XWKTM (value pack, newest)
XWKPY (in the middle) which apparently is 2.3.6.... (people are saying it's actually 2.3.3).
Anyway, guys, which ROM do you use, if you have a official one? Any help is appreciated. Thanks.
Links to the ROMs:
http://www.android.gs/update-galaxy-ace-gingerbread-xwkpy-2-3-6/
http://www.android.gs/update-galaxy-ace-s5830-official-gingerbread-2-3-6-value-pack-xwktq/
http://www.android.gs/root-galaxy-ace-s5830-gingerbread-2-3-6-ddkq8/
Click to expand...
Click to collapse
I'm using KTM as base, it works fine, but if you're worried the little space you have now, then upgrading... xDDDDDDDD
Don't worry you can delete useless apps and free memory space
A simple tutorial: http://forum.xda-developers.com/showthread.php?t=1034145 (your pasted links also can serve )
Bootloop is fixed doing wipe factory reset and cache via stock recovery, after flashing the Official Firmware via Odin
Viper The Ripper said:
I'm using KTM as base, it works fine, but if you're worried the little space you have now, then upgrading... xDDDDDDDD
Don't worry you can delete useless apps and free memory space
A simple tutorial: http://forum.xda-developers.com/showthread.php?t=1034145 (your pasted links also can serve )
Bootloop is fixed doing wipe factory reset and cache via stock recovery, after flashing the Official Firmware via Odin
Click to expand...
Click to collapse
Thanks man! Didn't see that thread. And about the little space: The phone is filled bloatware from Orange. Oh, I'm gonna sound like a noob now, but what is KTM? Thanks ;D Also, on the page there's some Vietnam firmware.... I live in the UK. My question primarily was which version (as in, the letters such as DDKQ8 shall I use.
domdomrys said:
Thanks man! Didn't see that thread. And about the little space: The phone is filled bloatware from Orange. Oh, I'm gonna sound like a noob now, but what is KTM? Thanks ;D Also, on the page there's some Vietnam firmware.... I live in the UK. My question primarily was which version (as in, the letters such as DDKQ8 shall I use.
Click to expand...
Click to collapse
Here it is where you'll get all official firmwares http://www.sammobile.com/firmwares/1/
Select your country if you want, KTM is an official firmware from Spain (android 2.3.6.) but don't matter if you flash a firmware from another site but you'll need to change maybe the modem after flash an Indian Firmware, so try to flash an European Firmware to avoid this kind of stuffs
I recommend you the Spanish KTM... Good battery duration and it's perfect as base.
Sent from my GT-S5830i using xda app-developers app
Thanks for the replies. I found this site with firmwares: http://sampro.pl/firmware/android/samsung-s5830/
Holy crap. That's quite a lot to choose from... Are they all the same? Or do they come with different bloatware/lockscreens etc. Also, which shall I install so I won't have problems with the modem?
domdomrys said:
Thanks for the replies. I found this site with firmwares: http://sampro.pl/firmware/android/samsung-s5830/
Holy crap. That's quite a lot to choose from... Are they all the same? Or do they come with different bloatware/lockscreens etc. Also, which shall I install so I won't have problems with the modem?
Click to expand...
Click to collapse
I explained you before, if you use a fw form Europe or near your country, you won't face moden's troubles
Viper The Ripper said:
I explained you before, if you use a fw form Europe or near your country, you won't face moden's troubles
Click to expand...
Click to collapse
Yeah, thanks, but is the content of the ROM the same? Like the look of certain things. Eg. lock screen.
domdomrys said:
Yeah, thanks, but is the content of the ROM the same? Like the look of certain things. Eg. lock screen.
Click to expand...
Click to collapse
umm I don't know, can change some useless app, lockscreen (it is the same for me)... but well you can change it when you want
Viper The Ripper said:
umm I don't know, can change some useless app, lockscreen (it is the same for me)... but well you can change it when you want
Click to expand...
Click to collapse
Thanks, that's all I needed to know. I also read through a thread on this ROM. Gonna flash it tomorrow. Thanks again!
Flashed and rooted it, no problems whatsoever. Do you guys recommend anything to make it even quicker/get more space/better battery life?? Because the internal space it bad. Thanks.
domdomrys said:
Flashed and rooted it, no problems whatsoever. Do you guys recommend anything to make it even quicker/get more space/better battery life?? Because the internal space it bad. Thanks.
Click to expand...
Click to collapse
well, the best way >>> delete all your useless apps (I don't use gapps e.g.), which are consuming your ram (or are running in background), reduce the brightness, use low frequencies, disable sync, delete default browser and use a light one... you can try Stocklite rom (stable without bugs and all performance from stock rom)
If you are using a custom based stock rom, don't use setcpu/similar apps to set your CPU frequencies, check my signature thread , to set frequencies when android boot without to use memory space and ram consumption
Hello,
Using MIUI ROM v6 BenzROM I use my phone normally takes the carrier network, everything ok, but when using ROM Maclaw CM10.1 ('20130829) the network does not work.
It is interesting that two people of Brazil and also using the same operator (Claro), said that normal phone functions of them, which are also i8190L. For them, everything works normally.
I've had problems with lack of NV.DAT, but I checked and everything is ok. IMEI, Baseband ... only network that does not.
Somebody help me?
--------
Update ~~
I've been trying to talk to Maclaw about the problem and he asked me to post the logcat and dmesg to check the error. I'll post here too in case anyone is interested.
Well, the reason for the update is not quite that, but I answered on the blog Maclaw, asking me to update my modem, but what I stated is different from the present.
Can I really do this? Will not damage my board?
Try flashing Stock rom from your carrier in ODIN and tell us whats happening it must work with out anyproblemz, otherwise your phone is damage
Kpoch said:
Try flashing Stock rom from your carrier in ODIN and tell us whats happening it must work with out anyproblemz, otherwise your phone is damage
Click to expand...
Click to collapse
Even with the ROM BenzROM v6 MIUI work, think you may be corrupted?
Just restore the backup of ROM BenzROM v6 MIUI network and functioned normally.
-------
After I restored the ROM Benz, reinstalled the Maclaw and gave the factory wipe, but still, nothing.
Come back to stock ROM and everything worked well too. I installed and gave Maclaw factory wipe, but the error continues.
I have same issue network is fine on stock rom but when i flash mclaws 10.1 theres no network at all and its a i8190N
Sent from my GT-N7000 using xda app-developers app
This is a big problem. I took some research and saw that it is already complicated. There were people who preferred to stay with the old ROM than with the wonderful Maclaw because consiguiu not solve the problem.
I'm still looking for a solution.
I remember an update that came out today and stated in the changelog that he updated the RIL, but still the error persists.
feelknOck said:
Hello,
Using MIUI ROM v6 BenzROM I use my phone normally takes the carrier network, everything ok, but when using ROM Maclaw CM10.1 ('20130829) the network does not work.
It is interesting that two people of Brazil and also using the same operator (Claro), said that normal phone functions of them, which are also i8190L. For them, everything works normally.
I've had problems with lack of NV.DAT, but I checked and everything is ok. IMEI, Baseband ... only network that does not.
Somebody help me?
--------
Update ~~
I've been trying to talk to Maclaw about the problem and he asked me to post the logcat and dmesg to check the error. I'll post here too in case anyone is interested.
Well, the reason for the update is not quite that, but I answered on the blog Maclaw, asking me to update my modem, but what I stated is different from the present.
Can I really do this? Will not damage my board?
Click to expand...
Click to collapse
Update.
Updated the baseband to AMH1 and now he even thinks 2 operators, mine and another. Sometimes I can record, but the signal is bad and once managed to make a call stable for almost 10 minutes, but as soon as I hung up since I could not do anything else.