[Q] APN Keeps reverting back - Motorola Droid Bionic

Using my bionic on tmo usa and am trying to create a new apn that mirrors my friends phone, also on T-Mobile. When i create and save the new apn, and choose it, it sticks for a second then reverts back to the locked, default apn. The apn type i am trying to input is internet +mms. It does stick if i input default as apn type, however. Any ideas?

Related

[A] AT&T Monthly Data Only APN Broadband Setttings

Since I've replied to about 4 threads already with the same answer, I figured I would post this here and maybe have it made a sticky.
If you have recently flashed a new non AT&T Rom (Euro,Gingerbread, Overcome, CM7, etc..) you Galaxy Tab will not have the correct APN setting for your monthly data sim from AT&T.
The fix:
Go to Settings
Wireless & Network
Mobile Networks
Access Point names and make sure you have one called Broadband (assuming you are on the ATT monthly data only plan)
If you dont, create a new APN:
Name: Broadband
APN: Broadband
Just leave the other options as is, save it & select it.
I think by default it comes up with the ATT wap.cingular APN which doesnt work with the Tab Data plan.
OMG You're a lifesaver!
I just flashed my respiffied $200 AT&T Galaxy Tab with Overcome 2.0, and have been beating my head into the wall trying to flash modems and do all kinds of resets.
Thank you so much!
Weird part is, I had this exact problem when I activated a data plan for the first time on my AT&T tab a few days ago. Checked, and I had I already had an APN called "APN Broadband" so I thought it was a different problem. After fighting it for a while, I decided to create the new one with the name "Broadband" with the exact same settings as the "APN Broadband" one, and it worked perfectly! Apparently, the name is critical!
I just went through the same thing with my new AT&T Galaxy Tab. I had to modify one of the entries noted above to get it to work.
Name : APN Broadband (not ATT Broadband)
APN: Broadband
I'm happy camping again.
fasterbug said:
I just went through the same thing with my new AT&T Galaxy Tab. I had to modify one of the entries noted above to get it to work.
Name : APN Broadband (not ATT Broadband)
APN: Broadband
I'm happy camping again.
Click to expand...
Click to collapse
BTW, my Galaxy Tab is rooted using SuperOneClick.
OK, now I'm confused. As previously stated, I changed the APN name to APN Broadband and APN to Broadband and the wireless data started working. I turned on wifi, opened some random web pages, then shut off wifi. Now I'm not connecting to AT&T wireless data. I check the APN's again and the tab reverted back to the factory ATT Broadband. I swapped it back to the new APN I created (APN Broadband) and still could not get data. Now I changed back to the factory ATT Broadband, still no data. I began searching for more input. After 5+ minutes, I saw the 3G icon and I can reach the internet and market. I am new to Android devices, so I may be wrong, but I am not convinced I am done working this issue. If anyone else is has encountered this issue and have permanently fixed it, please add some food for thought.
fasterbug said:
I just went through the same thing with my new AT&T Galaxy Tab. I had to modify one of the entries noted above to get it to work.
Name : APN Broadband (not ATT Broadband)
APN: Broadband
I'm happy camping again.
Click to expand...
Click to collapse
Very interesting, as the one I had named "APN Broadband" is the one that would drop service whenever I opened Market, and I had to do exactly what the OP stated in his post to get it to work.
On a side note, I have noticed that it switches back to the default "APN Broadband" everytime I cycle airplane mode. I have to go back into the settings and choose "Broadband" again. Maybe I should just delete the old "APN Broadband" APN and hope it doesn't screw anything up.
Delete it. It will only make things easier for you.
Thanks!
RichAP, thank you very much for the APN info!
I spent the morning trying various combinations of uppercase, lowercase, password, no password entries with the wap.cingular.com APN. I did a bunch of searches and finally found this post. Didn't believe it could be as easy as just entering "broadband" into the APN settings, lol.
My AT&T 7" Galaxy Tab is now up and running with Overcome 7 v4.1 and using 3G. Yay!
(edit: yes I posted this as my first post just so I could hit the thanks button.)
I know this is an old thread but it helped me out recently, however, I found I had to use a regular phone SIM in my Note 4 Edge to add the Broadband APN and then switch back to the broadband SIM. If anyone is searching this issue and having a similar problem I hope this info might be helpful.

Throttled LTE? Way to force HSPA+(regain 3G after throttle) to conserve battery

Pulled from the Inspire forums and can confirm working mod.
PROCEDURE FOR ROMS WITH A SINGLE LOCKED APN:
If your APN is locked (it shows the lock symbol and you cannot change the settings), then we're just going to add a second one.
From the APN screen, press Menu>>New APN. Here are the settings for your 2nd APN. Everything is case sensitive and must be entered exactly as below.
Name: Media Net (if your 1st locked APN is named Media Net, then just name this one Media Net2 - this name in this field isn't important as long as it's unique)
APN: Phone
MMS protocol: WAP 2.0 (this option might not be in your APN, so don't worry if you don't see it)
MCC: xxx (Don't change this number)
MNC: xxx (Don't change this number)
APN type: default,admin,hipri (notice there are no spaces between the words and the commas)
APN protocol (if applicable): IPv4
Everything else: <Not set>
Once you have the above settings entered, press menu and save. You will exit back out to the APN selection screen. Now you need to select the little round button for the new APN (Media Net/Phone) that you just created. Your phone's data connection will drop for several seconds as it switches to the new APN, and then come back. If you find that your connection doesn't "stick" on the 2nd APN (i.e. the selection button keeps reverting back to the 1st APN) then reboot your phone and try selecting the 2nd APN again.[/COLOR][/B] It is mandatory that the 2nd APN is selected in order for the speed benefit.
We're done. If something went wrong and you need to revert back to your default APN config, from the APN selection screen just press menu and select "Reset to default".
Will this allow tethering without the tethering plan?
Thanks I can confirm it works great no need to root my phone now
Sent from my HTC PH39100 using xda premium
geek_riot said:
Will this allow tethering without the tethering plan?
Click to expand...
Click to collapse
Correct. I am on a $30 Unlimited LTE data plan no tethering but have it enabled with this mod.
Noodles5666 said:
Correct. I am on a $30 Unlimited LTE data plan no tethering but have it enabled with this mod.
Click to expand...
Click to collapse
Awesome!! Thanks!!
Even better it drops us off of LTE, i.e. we can now turn the darn thing off and save some battery
This doesnt let you use LTE 4g while doing tetherning. After adding this apn it kicks you to the HSPA+ 4g.
But this is an easy way to create an easy way to switch between LTE and HSPA+
Edit: also it didnt allow me to do tethering. Said i had to dial 611 and get it added.
I seem to be doing something wrong... I made the second APN and activated it. When I try to use the WiFi Hotspot App, I get a message about adding tethering. Should I be using a different app?
jason.hamilton said:
This doesnt let you use LTE 4g while doing tetherning. After adding this apn it kicks you to the HSPA+ 4g.
But this is an easy way to create an easy way to switch between LTE and HSPA+
Click to expand...
Click to collapse
This may be but my internet icon has not changed. Showing 4G but that is probably due to the market I am in is not an LTE market.
Noodles5666 said:
This may be but my internet icon has not changed. Showing 4G but that is probably due to the market I am in is not an LTE market.
Click to expand...
Click to collapse
Yea when you are on the 4g LTE network, there is a little LTE underneath the 4g symbol
geek_riot said:
I seem to be doing something wrong... I made the second APN and activated it. When I try to use the WiFi Hotspot App, I get a message about adding tethering. Should I be using a different app?
Click to expand...
Click to collapse
Have you followed step by step? Yes? Then have you tried rebooting the phone?
Is there any way you can update that APN to work with LTE 4g.
jason.hamilton said:
Is there any way you can update that APN to work with LTE 4g.
Click to expand...
Click to collapse
Sorry as of now I don't have a way. Will be figuring that out shortly.
Does not work for me.
Followed steps and reboot. No good.
Not Working
It works for a second and then it reverts back to that you need a tethering plan. Any other info. Thanks
z45123 said:
It works for a second and then it reverts back to that you need a tethering plan. Any other info. Thanks
Click to expand...
Click to collapse
I've ran it for about 2 gigs today and had no issues. Also once you turn it off the next time you wanna do it you will have to switch back to the stock APN and then back to the one you made. It's not perfect but it's better than nothing right now.
I didn't use these settings to enable tethering, but I entered them just to get ANY sort of data connection. It definitely solved my issues. Thanks a lot!
Won't revert to default
I set up an apn for hspa+ before I could get a 4g sim. I've switched sims and now I wanted to go back to default and it said I had no data due to an apn error. The radial box is selected for the original apn.
It would work for a second and my laptop would see the network but quickly went back to telling me to go to AT&T and get a tethering plan. However Having the second APN seems to help when the data gets flaky, which is VERY often. Speeds are erratic and I often can't get ANY data.
Sentinel
would love to see this work with the LTE connection.

[Q] Droid 3 xt862 mms/wap settings on Alltel

I've got an xt862 activated on Alltel but am unable to get mms/web configured and working. It does work on web when connected to Wifi but of course if I'm going to use this device I need mobile web. It works for talk and text but no mms and no web.
I had to manually put in the MDN/MIN in order to get my number programmed. I am in one of the few areas where Verizon and Alltel are supposedly separate. After manually programming MDN then *228 would dial to Alltel prompt as opposed to VZW's prompt before I programmed manually. The phone seems to have the vzw stock rom.
I am switching from a Motorola a854 (defective screen). I copied any programming settings from the a854 to xt862 that I could, even if they weren't necessary(IMSI, country code, etc). I did an APN Backup and Restore from my old device to the new one, and also tried an APN Backup found online supposedly for Alltel devices.
Sorry for the noob post but I've searched multiple forums in an attempt to get any resolution to this issue and wanted to avoid creating my own thread.
Any assistance would be appreciated, I do not foresee any world traveling in my future so standard CDMA connectivity is all I'm looking for.
Thanks in advance and sorry for long post, tried to be brief while remaining thorough.
huhu, if the apn restore worked u maybe just need to tick the checkbox
to activate the apn
settings->wireless & networks->mobile networks->access point names
if there is no entry u have to add the APN manually
http://www.pccard.co.uk/support/ufaq/connectionparameters.php
huhu1312 said:
huhu, if the apn restore worked u maybe just need to tick the checkbox
to activate the apn
settings->wireless & networks->mobile networks->access point names
if there is no entry u have to add the APN manually
Click to expand...
Click to collapse
Thanks for assistance, but I'm with Alltel (CDMA) and this device only allows selecting APNs in GSM Settings. When I Change Network Mode from CDMA to GSM or Global it will then show no service alltogether. I'm still trying, I feel if I could get the proper APN then I would be ok but I'm not sure. Thanks

[Q] My Global unlock experience, and confusion

Yesterday I decided to get a global simcard from Orange network in Austria. I only want the data since I have no one to call here. I got my unlock code from verizon, pluged in my new sim card and entered the unlock pin provided by the new sim card. I did not get a pop up to enter my verizon unlock code. I bounced back and forth between Stock and MavRom 4.5 using safestrap 3.05. My service bar showed that I was getting signal but I couldnt figure out why the data was not working. While running mavrom I browsed through to Settings > Wireless & network settings > Mobile networks. At this point I was prompted to enter my SIM unlock code that was issued to me by verizon. Without much hesitation I entered the number and was not prompted again, everything looks just fine. My APN settings show that Orange AT is my apn name. the APN is locked which is slightly confusing. My data still is not working properly, I modified my build.prop with
ro.telephony.default.network=0
ro.mot.phonemode.vzwglobalphone=0
Next, I was still not having success. After some google searches I saw suggestions to try some kind of APN manager. To my surprise Tweakker successfully set my APN and gave me the Orange AT data service. Tweakker somehow unlocked the APN as well as added its own 2 APNs.
Why was MavRom successfully able to unlock my SIM? or has it actually unlocked my sim?
Tweakker does not have root. In a perfect world I would like to not have tweakker installed to keep the system as minimal as possible. What is allowing tweakker to magically set up my APN? and is it possible to do this manually?
REVISION - I mimicked the APN settings that tweakker had set, I also looked up the setting for Orange AT on their website. I am still lost as to what the proper APN Type should be for a strictly internet device. currently i have that set as "default".
How does one lock/unlock APN settings?
0try putting your apn settings in /etc/apns-conf.xml
Sent from my DROID3 using xda premium
It sounds like it was unlocked but the APN wasn't working right. Sometimes after installing a new ROM on my 883 radio I have to set the APN manually.
Endoroid said:
0try putting your apn settings in /etc/apns-conf.xml
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
I tried adding my APN to this file, this did not add my network even after a reboot. could safestrap be getting in the way of the right file being edited?
MrObvious said:
It sounds like it was unlocked but the APN wasn't working right. Sometimes after installing a new ROM on my 883 radio I have to set the APN manually.
Click to expand...
Click to collapse
I did not flash my radio, but yes I did set the APN manually and this did work for me. however I cannot figure out how to unlock / relock a preconfigured APN.
1) Is the network GSM? In that case use ro.telephony.default.network=3 not 0.
2) Also try turning ON/OFF airplane mode if you use stock rom.
3) Make sure your apns-conf.xml has the right data, also try using APN-type "default" not something else
If all fails, how old is your SIMcard? I had to get a new SIMcard to get data to work on my droid 3 even though it worked before in my old samsung

[Q] Why can't I save APN with MCC other than 262

Hi folks,
I'm running 2.24.161.1 (4.2.2) with vodafone branding.
My One cannot get APN settings from the provider, it never could, so I manually configured the APN for my default network, which works.
I was in Spain recently and I wanted to roam a little, but as my mobile cannot get the settings from the provider I tried to manually configure the APN again, this is where I ran into my problem.
I can create a new APN, I can change all settings as I need them and I can save it and activate it. However this only works as long as the MCC is set to 262. When I tried to configure MOVISTAR APN with MCC 214 and tried to save it the APN was just gone.
I don't get any errors or whatsoever. I can modify the APN and save all changes as often as I want, but trying to save an APN with MCC not set to 262 results in the APNs disappearance, its simply gone from the list. This also happens when I modify an exisiting APNs MCC value and save it - the APN will be gone from the list and I have to recreate it.
Is it likely to be a problem with the branded software version? I like the One as it is otherwise, I see no reason to unlock, root, flash other stock and thereby loose all my settings and reconfigure the phone again, but if that would solve the problem with foreign APNs I guess that is what I will do.
Anyone know what is causing this problem and how to solve it?
Regards
gimmeg

Categories

Resources