Database Develop

[Q] is this a real brick

i have done odin's 3 button combo fix (sbl fix) to my branded and rooted galaxy s and ooops the phone turn of and no button works any more , the jig method can't help me so any Suggestions
pleeeeeeeeeees

What does the screen show?

the phone do not turn up anymore so it shows nothing.

abdou ali said:
the phone do not turn up anymore so it shows nothing.
Click to expand...
Click to collapse
If there is nothing I'm sorry to say it sounds bricked

hi this happened to me the other day try taking your battery out for a few mins then 3 button combo whilst putting battery back in worked for me but took a couple of goes

Why do you say the jig can't help you? Have you tried one?
Sent from my GT-I9000 using XDA Premium App

yes i've tried a jig and nothing happened !

I saw in one of the xda threads that i need a jtag to revive my phone because the sbl is just dead and i think it's my case !
i will try the jtag trick then i will make you know if it worked or not ;-)

Can I just ask how the phone managed to turn off in what seems to be the ten second flashing window of the 3br fix?

i know not really

after crashing my pc while flashing a new rom via odin, my phone seems really dead as yours.
the jig-method worked well for me. but i had to wait a few seconds with jig before the downloadmode appear.
if its no hardwarefault it should work fine if you wait a few seconds (it tooks 3 attempts to figure out that it takes between 5 and 10 seconds for me to work.)
if this wont help the jtag is possibly your last choice.
beware your warranty if you do that.

[Q] My SGS looks dead, no power & no boot !

Galaxy S does not power on, nor boot, stays like dead phone.
I tested the battery also in other Galaxy S Phone and it is ok, the other phone worked fine.
i tried putting other battery in my phone and same thing. no life.
i tried for power on.
i tried download mode.
i tried recovery mode,
nothing works.
this situation happened due to,... i was trying to flash stock rom for my phone by odin3 and all went fine (with the "s1_odin_20100512.pit" file), the set rebooted but after that.
it never started.
please help.....

Well it sounds dead but...
Do you get any port connection when you go through the motions of download mode in odin? Saw something about sometimes the screen driver gets screwed.
Have you left the battery out for a while and then tried again (I've seen 15 minutes suggested)?
Otherwise there seems to be a JTAG method that is a deep hardware recovery (specialized shops and equipment) you could find a shop near you or that you could look into (google it).
G

if theres no way you can get to the download method on your own i suggest you try the jig method already on the internet if not there are many websites that fix the brick for a fee :/ sorry to hear bout ur situation

Yes sorry jig method definitely before jtag.
Sent from my GT-I9000M using XDA Premium App

Thank you guys for your quick responses, but i think it's definitely the JIG method that is my last chance to recover my phone... I tried already to pull out the battery for 15mns, but nothing works. Will keep you informed.

You tried to connect it to your PC? maybe you can resuscitate it by sending some adb commands.

[Q] PROPERLY BRICkEd SAMSUNG GALAXY S I9000's ONLY - (no screen response)

hi iv had a serious journey with my sgs i9000 here's how it goes:
i had it on 2.2 and then upgraded it officially to 2.3.3
not much else happened until i realised i wanted voodoo sound (apparently it was hyped to be awesome....its not that great) and neither is the ext4 file system 2.3.3 seems to be just as fast...dont know if it was a major problem on 2.2 but it aint really on 2.3.3
so i flashed voodoo on 2.3.3 from some website ... downloaded the app for the sound as the kernel didnt support that...
then i was using it and played around with the settings in clock work manager and i mounted and unmounted sd/card i dont think it made much difference but i thought i'd mention it ... the reason i did this is because when i tried to load a rom it wouldnt find all my sd card files beyond like the first 5 folders so i thought i'd give it a kick start....
then what happened is the phone just went off and i couldnt get it back on.... little did i know this was soft brick... i didnt know why....
i got the computer screen with the phone and exclamation mark.... i got into download mode a few times....
NOW .... i cant get it to turn on AT ALL using any combo buttons....
i think the nail in the coffin was flashing it with the "one-click odin" which was for the captivate but it said i could use it on the i9000 too.... which blatently screwed up the device....
anyway iv ordered a jig device... if this gets me into download mode ....what am i supposed to do...?
also is there anything i can do to get it into download mode now ? (bearing in mind iv done all the combo's ... some people say leave the battery out for a couple of minutes or half an hour....)
i think the bootloader is screwed up because it doesnt switch on....
even after i did a clean install of 2.3.3 with the pda phone and csc roms... it still just randomly switched off after 2/3 minutes of boot time....
what do i do now ?
samsung repair centre said they couldnt do anything and i'd have to send it back to samsung.... is it that bad?

Tried all the combos.... So you tried plugging in combo, then battery and also holding combo and then battery without cable in...
Have you read the pinned thread in general i think it is regarding, bricks?
Moving on
how did you do a clean install of 2.3.3 if you couldn't get DL mode??
Haven't read into the one click Odin so can't comment on that, but i think that was meant to be for softbricks...
anyway regarding the jig, just plug it in, and then wait a second or so, of not a minute (usually instant) and it should go into download mode. If it doesn't work again try some combos with the jig in...
If it is a hard brick i think you need to J-tag it, or yes take it to samsung in which case they may charge you for a repair, unless you say kies did it, and you didn't tell them everything you didi when you spoke to em.
Think thats everything lemme know if i missed out a question of yours or you want something better explained etc..

yeah i guess i was vague on the combo thing...
i've tried:
a) holding power, menu and volume down while sliding battery in (no usb cable in )
b) same as above with usb cable in
c)just menu and volume down buttons while i put battery in
d) both volume buttons and cable in
e)both volume buttons and battery in
.... the reason for d and e is because when i flashed it with the one click odin installer thing.. it restarted and showed a a t&t screen so i think its flashed the software with a samsung capacitive rom....so in theory i need to use those buttons ? not sure .... yet more questions....
i just hope this jig thing works ... btw do i have to pay sammy is my phone is under warranty?
how do i reflash the bootloader so it works properly? is that even the problem? do i need to do that? which pit file do i use ? some people say 512.... some say thats outdated and the new pit file is the thing to use .. ?
Talon26 said:
Tried all the combos.... So you tried plugging in combo, then battery and also holding combo and then battery without cable in...
Have you read the pinned thread in general i think it is regarding, bricks?
Moving on
how did you do a clean install of 2.3.3 if you couldn't get DL mode??
Haven't read into the one click Odin so can't comment on that, but i think that was meant to be for softbricks...
anyway regarding the jig, just plug it in, and then wait a second or so, of not a minute (usually instant) and it should go into download mode. If it doesn't work again try some combos with the jig in...
If it is a hard brick i think you need to J-tag it, or yes take it to samsung in which case they may charge you for a repair, unless you say kies did it, and you didn't tell them everything you didi when you spoke to em.
Think thats everything lemme know if i missed out a question of yours or you want something better explained etc..
Click to expand...
Click to collapse

ok now iv got it to turn on quite regularly .... but it keeps cycling (bootlooping) the at&t logo screen .... cant get into download mode or recovery mode.... just keeps boot looping.... oh and when i plug in the usb cable it just turns off.... its like i cant start it up with a usb in the phone...
update: been reading around and if anyone has this problem.... it looks like you might be hard bricked and apparently this cant be resolved via jig device..... dammit ...i'll still try and update the post... peace

So you haven't tried the jig yet?? because you haven't got it yet right
I don't think the device is bricked at all. Bricked usually means you have no response from it, so no matter what combo, actions you take you get no reaction.. However you are getting a boot although there is something going wrong as it does so...
So yes you need a new bootloader, i think every rom that you flash through odin has one, but i guess it may not, its best to search this, but i have read a few posts that say you need to click on update bootloader (i would check into this, as if this is wrong it will definitely brick your device)
My suggestion is go back to the onclick odin thing as that should do it, im sure someone has done something similar.
Yh so to sum up, i would have high hopes for a restoration (but what so i know ) and yes flashing a new bootloader with rom i reckon would do the trick. I think a stock rom will do it. Click on the stock rom link below and type in a few search terms in that thread to see if you pick up anything otherwise do a slightly wider one of the forum.

Talon26 said:
So you haven't tried the jig yet?? because you haven't got it yet right
I don't think the device is bricked at all. Bricked usually means you have no response from it, so no matter what combo, actions you take you get no reaction.. However you are getting a boot although there is something going wrong as it does so...
So yes you need a new bootloader, i think every rom that you flash through odin has one, but i guess it may not, its best to search this, but i have read a few posts that say you need to click on update bootloader (i would check into this, as if this is wrong it will definitely brick your device)
My suggestion is go back to the onclick odin thing as that should do it, im sure someone has done something similar.
Yh so to sum up, i would have high hopes for a restoration (but what so i know ) and yes flashing a new bootloader with rom i reckon would do the trick. I think a stock rom will do it. Click on the stock rom link below and type in a few search terms in that thread to see if you pick up anything otherwise do a slightly wider one of the forum.
Click to expand...
Click to collapse
jig arrived today! .... i plugged it in ..... NOTHING ..... (read on theres more to the story!!!)
so i put it in nothing happened...... i thought maybe the jig device was not working so i tried it in the i9100 (s2) .... WORKED ...!
im really stubborn so i needed to make mine work too..... i read in a review of the jig device that someone bought one and it hadnt worked .... i hadnt ruled that out
anyway all day i just kept trying to jump start it by putting in the wall charger in and out ... i usually get some reponse from that....nothing apart from a second of something like a loading circle......
anyway then i left it on charge for an hour ....maybe the battery was dead and then tried again ....
(btw i was getting no response at all at this stage, not even the at&t thing ...)
so it was pure black screening me.....
then i got home from work and thought let me exchange the battery and see what happens....
i changed the battery and put the jig device in ...... VOILA !!! download mode....
all is well so far i've flashed with 2.3.3 pda,phone and csc files and checked repartition... i haven't messed with the bootloader option
seems to be working ok....also gave it a restart too ... last time it got to this point but it didnt turn back on after a restart ....
in conclusion .... charge battery fully externally (putting the power in the phone in this state was not charging it)
then with a full battery put jig in .... if that doesnt work you phone might be seriously bricked.... bravo to whoever dreamt up the jig device

Glad to hear the great news!

Nice
Thanks for this useful info

Need help URGENTLY (phone dead?)

having a strange problem. was having a normal day with my phone, then at some point in the day I tried turning it on and nothing. No matter what I have done the screen just doesn't come on. Here are a ist of things I tried doing.
- Take batterry out for over a minute then try and turn it on. FAILED
- take battery out the plug phone into computer and turn it on. FAILED
- Tried to enter both recovery mode and download mode. FAILED
The phone simply does not respond to any button inputs. Have had the phone for almost a year and ZERO issues. Use the phone lightly and its in top condition.
Any help will be appreciated.

Try a different battery. You have rooted the phone? Give us more info about the phone like custom ROM and what do u suspect to be the probem.

Lorddeff have you heard of sds?
http://www.ifixit.com/Answers/View/128792/Sudden+Death+Syndrome+how+to+fix
《¤★N€€bz★¤》

Varad297 said:
Try a different battery. You have rooted the phone? Give us more info about the phone like custom ROM and what do u suspect to be the probem.
Click to expand...
Click to collapse
Yh, rooted and all that. Ben rooted from the first day I got it. Using philz safe kernel with the ultimate TW ROM. Never did any funky stuff on the phone. I'm pretty sure that its not from a battery cause I have two of those and I am sure its not from a bad flash or something. My last flash was over a month ago and the phone was working perfectly until it literally just stopped working like 5 mins after the last time I used it.
neebi007 said:
Lorddeff have you heard of sds?
http://www.ifixit.com/Answers/View/128792/Sudden+Death+Syndrome+how+to+fix
《¤★N€€bz★¤》
Click to expand...
Click to collapse
I have now... and thanks for that link. Looks promising. Though it means I would have to ship my phone out, which I guess is a lot better than doing nothing.

QHSUSB_DLOAD mode??

Hi everybody,
a friend of mine got his HTC One (black) yesterday and rooted it. He flashed a proper custom ROM on it which I and another one of my work buddy use as well without any issues (InsertCoin). No further flashes done, no other custom kernels, no S-Off, no SuperCID. Just unlocked Bootloader and custom ROM.
He let the device run dry yesterday evening so it shut off itself automatically. He put it on his charger, the phone turned on, he did some surfing and installing apps from the market and set up his alarm. The phone charged over night and he was also able to switch off the alarm this morning.
He got ready for work, got into his car and wanted to switch on the screen on the one for some good tunes. But the screen stayed black.
When I arrived at work, he was a little upset and panicked a little. I thought I was able to recover the device.
After plugging it in to my work computer, the device manager just shows a unknown device called "QHSUSB_DLOAD" so I went to google and looked it up..
Weird thing is: QHSUSB_DLOAD wasnt seen yet on the HTC One (M7) as far as I can see it and it was pretty bad on the HTC One S. It means "Qualcom High Speed USB Download Mode" and on the One S as well as on the Nexus 4 this devices showed up after the bootloader got damaged or the device got stuck in that mode for good.
When plugging the device in (USB / Wall charger) the charging LED doesnt turn on at all, the capacitive buttons dont start to blink while holding down the power button as well.
This thing seems to be gone for good.
But aint it the way that we dont even have any access to the bootloader if its not an official update from HTC? Signature check and stuff? Since the device was rooted, no OTA updates were able to arrive at all. He told me that he didnt try to flash anything after we flashed the custom ROM.
Any advice on that?

Did you even try booting the device first thru hboot/bootloader or holding the power button to force a restart? If you did try connecting the device while on QHSUSB_DLOAD and execute a compatible RUU on your PC. RUU uses android's download mode to flash the ROM so it should be repaired by an RUU.

Already tried, no luck. Tells me the device has not been found.

I am sorry to hear that, man, but from the looks of it your friend now has a paperweight. I'd take it to an HTC service center and hear what they have to say regarding this; of course it will no longer be covered under warranty, but maybe they can fix it for you for a price or something.

Are you sure RUU can't find the phone? If it can't then I guess only a JTAG box can fix it so either send it to HTC for repair or have someone who knows JTAG fix it.
Try4Ce said:
Already tried, no luck. Tells me the device has not been found.
Click to expand...
Click to collapse

I saw this issue on my friend's GS3 once. It was hard bricked and there was no way to recover from what I read (at least on the GS3). I know I saw a thread somewhere here in this forum about the same issue and someone linked to a Sensation thread where there was a way to fix it but I'm not sure if it would apply to the One

Same problem - but the phone magically fixed itself!
I had the exact same problem with my HTC One as described in OP...
My alarm went off in the morning and I set off for work, my battery was low but I thought that I would just charge it when I got to work. I was playing a game (Dungelot) whilst waiting for my bus and was receiving pop up messages about low battery. When it got to 4% left I decided that I would finish the level then close the game down, but as I was just about to finish, the phone went blank...I assumed that I had naturally used up all the battery life and although peeved that I had probably lost my progress in the game, wasn't too bothered.
I got to work and plugged my phone in to charge on my computer. The computer wanted to search for QHSUSB_DLOAD drivers but I thought this must be what it does when my phone isn't switched on and it finds the device. I cancelled the search prompt and tried to switch my phone on...nothing happened.
I tried for the rest of the day, trying to force shut down the bricked phone by holding power in for 30 secs, trying to power into boot mode etc...everything! But the phone would not switch on and the only response I got from it was a little orange LED every now and again and the QHSUSB_DLOAD prompt.
After googling the prompt - I found myself here and REALLY began to sh*t my pants! I've only had the phone less than a month and felt I was tech-savvy enough to flash my phone with a new ROM (Android Revolution HD) to try and get rid of some of the bloatware. I had flashed a new ROM successfully a coupld of weeks before and everything had been fine up that point.
I went home depressed but throught i'd try to plug my phone into a proper mains charger rather than my work's old USB cable (that came with my previous HTC Desire Z) I was going to try a long night of searching the net to try and find a way where I could at least recover the photo's, Zoe's and vids of my new born son but had such a headache that I gave up and went for an early night.
I was woken unexpectedly the next morning by my phone alarm going off! I stopped the alarm and the home just went to Home screen as normal! I don't know how or why these events happened...whether it was the flashed ROM, the game I was playing, the battery running out before the phone could shut down properly, the old USB cable in my work not charging but detecting the device or a combination of all of those, but so far, the phone jumped back into life with the alarm after being charged in the mains all night!
Thought i'd share as it may just help someone else out there who encounters this!

Some phones have miraculously come back from QHSUSB_DLOAD with no explanation of why. Other than that it usually means a hard brick. You can send it to HTC, they will charge you and replace the main board, from what I've heard.
Sent from my HTC One using XDA Premium 4 mobile app
---------- Post added at 08:20 PM ---------- Previous post was at 08:20 PM ----------
Also, its not unheard of. I've seen it happen a few times in these forums.
Sent from my HTC One using XDA Premium 4 mobile app

I wonder if having your alarm set saved you. This phone will actually power itself on so as not to miss an alarm.
Sent from my HTC One using xda app-developers app

lampel said:
I wonder if having your alarm set saved you. This phone will actually power itself on so as not to miss an alarm.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Hi Try4Ce,
I am facing the same issue. If your friend's phone is fixed, can you share with me how the fix happened?
Many thanks in advance.
Krishna Menon.

same here
Any idea how to fix it?

Delingerb said:
Any idea how to fix it?
Click to expand...
Click to collapse
Jtag or send it to HTC is the only way.
Sent from my HTC One using Tapatalk

My Solution
Had the same Problem.
My Solution was to Download "HTC One (M7) Toolkit" and force Fastboot.
Pushed Power and Volume Down until Screen was Flashing.
Took about 2 minutes and the Phone was rebooting.
I have no idea what was happening. I have no idea if this helps or works for others. But its worth trying.
Sorry for my bad english.

Try4Ce said:
Any advice on that?
Click to expand...
Click to collapse
CoryTallman said:
Some phones have miraculously come back from QHSUSB_DLOAD with no explanation of why. Other than that it usually means a hard brick. You can send it to HTC, they will charge you and replace the main board, from what I've heard.
Click to expand...
Click to collapse
bkmenon said:
Hi Try4Ce,
I am facing the same issue. If your friend's phone is fixed, can you share with me how the fix happened?
Many thanks in advance.
Krishna Menon.
Click to expand...
Click to collapse
Delingerb said:
Any idea how to fix it?
Click to expand...
Click to collapse
This is some kind of mode that is enabled when you hold power on button when the device battery is completely drained. i.e. when you try to turn device on it will not boot up (Special I was connected to usb cable via PC to charge my phone NEXUS 4 when I get into this mode). I saw a similar mode where nvflash commands are executed something like APX(can't recall correctly) with Tegra 4 device (that time also I was connected with a usb cable and charging the tablet when it was completely drained!). A simple solution to quit this issue is DO not Panic and let the device get a little charge. After that boot normally with the power button. In case if it didn't try other modes to enter such as recovery or fastboot reboot commands if your device is getting recognised..

QHSUSB DLOAD means its a hard bricked phone, No amount of messing about with it will fix it, Send it to a service centre, it will probable have to have the motherboard replaced..Sorry

My device entered in QHSUSB_DLOAD mode after the 4.4 ota was installed and 30 minutes later, I was able to turn up the phone. It restarted itself like 5 times and then it was normal. Miracle..

danielr18 said:
My device entered in QHSUSB_DLOAD mode after the 4.4 ota was installed and 30 minutes later, I was able to turn up the phone. It restarted itself like 5 times and then it was normal. Miracle..
Click to expand...
Click to collapse
What do you mean by "force"? What did you do exactly?

My device wouldn't do anything, and it was in QHSUSB_DLOAD . But when I later pushed the power button for a minute, it worked.

danielr18 said:
My device wouldn't do anything, and it was in QHSUSB_DLOAD . But when I later pushed the power button for a minute, it worked.
Click to expand...
Click to collapse
mine spent the night carrying on waking took the charger and the green light for continued access, tried to turn it on but could not. After reading your response, I tried to hold the power button for longer. After 15 seconds the phone rang and the light came on, everything works perfect so far

Today while I was updating firmware phone gone to QHSUSB_DLOAD mode.
I am guessing it's end of road. :crying: