First of all, HI to every one, this forum is excellent and u are doing excellent job.
I have one problem,yesturday my htc tytn Ii felt down from half meter and from that time my touch screen is not working . screen is working fine but touch no ...what can i do? to open a case and see if conector is maybe disconected or ? is there need buying new lcd screen?
You can try opening it up and disconnect/reconnect the touch digitizer ribbon cable, if that doesn't work buy a new touch screen digitizer. They're fairly cheap.
so correct me if i'm wrong,there are two parts on the display? lcd screen and that touch screen digitizer??and digitizer is on top?
Yes, there's the LCD screen, then on top the digitizer.
the digitizer costs about 15 bux on ebay, and the lcd with the digitizer costs about 50. my touchscreen stopped responding awhile back, so i had to replace it. word of advice though. the digitizer is kinda build into the lcd, and it is a huge pain (atleast 4 me) to replace it. i ended up cracking my screen doing it, and had to but the whole lcd.
so your suggesting to buy entire lcd screen with digitizer on it?
You can get the lcd+ digitizer from yallstore for 35$ http://www.yallstore.com/htc-tilt-tytn-ii-att-8925-lcd-touch-screen-replacementt56-p-874.html
Which is exactly what i ordered on thursday after my screen cracked.
Replacing JUST the digitizer is quite tricky, i don't know if any of you guys have done it (i have) and it was pretty darn tricky if youve never taken fiddley things apart beware! the digitizer glass is glued on (around the edges) to the LCD, a sharp knife around the edge (the glass WILL crack) and a careful replacedment (i had to solder the ribbon cable on) should help there is a guide somewhere where someone has documented their attempt!
so can i be sure that my problem will be solved with new lcd screen?
please guys i need anwsers fast
zolmajstor said:
so can i be sure that my problem will be solved with new lcd screen?
Click to expand...
Click to collapse
Can you be certain this will fix it? No. It's about 99% likely, however. I don't know about you, but I pay alot more than $35/month just for my service. I haven't done the screen on my Kaiser, but I did on my Excalibur, which my son then inherited. To be honest, the Kaiser looks easier from what I've read.
it most probably isn't a software problem, so yes buy a new LCD+digitizer and replace both.
i am a happy owner of a galaxy tab 8.9 and it took a fall off the top bunk broke digitizer ordered replacement and while replacing screen digitizer acidently lightly scratched lcd now i have scratched lcd and i m broke any advice would be much appriciated on what i can do.
chris9983 said:
i am a happy owner of a galaxy tab 8.9 and it took a fall off the top bunk broke digitizer ordered replacement and while replacing screen digitizer acidently lightly scratched lcd now i have scratched lcd and i m broke any advice would be much appriciated on what i can do.
Click to expand...
Click to collapse
Oops....
Can't you get a new screen remove old screen put new screen in!
Title pretty much sums it up, anyway I purchased a new digitiser from amazon fitted it no problem turned it on and down the left hand side the screen about 2cm width is a black line can see the lcd is fine by little lines init.
I though i damaged the ribbon on the digitiser so bought a new one and its the same what could be the problem thanks?
Thanks in advance
the bottom half of the screen of my colleagues' ace is not responding.
To fix this, can i purchase a new glass digitizer on ebay? Or is there something else wrong?
secondly: is there a difference between just the glass front and the digitzer? Are these separate parts of the phone?
I've recently replaced the broken screen from my sisters' ace, so replacing the glass screen will not be a problem.
Hi guys
I've just bought a new white digitizer for my old Galaxy Ace that was cracked. The phone originally was black, now i bought all stuff white (home button, back cover and front glass).
I've changed everything without any kind of problems, but the digitizer won't recognize any kind of touch on it.
I've double checked the ribbon cable which seems to be perfectly connected (white mark aligned with mobo).
It's not the first time this happenz to me with the Galaxy Ace.
Old cracked digitizer still works, so it's not phone fault.
Any clue?
EDIT: The eBay seller wrote S5830 instead this digitizer was made for S5830i. So it's obv not working.
dedo.93 said:
Hi guys
I've just bought a new white digitizer for my old Galaxy Ace that was cracked. The phone originally was black, now i bought all stuff white (home button, back cover and front glass).
I've changed everything without any kind of problems, but the digitizer won't recognize any kind of touch on it.
I've double checked the ribbon cable which seems to be perfectly connected (white mark aligned with mobo).
It's not the first time this happenz to me with the Galaxy Ace.
Old cracked digitizer still works, so it's not phone fault.
Any clue?
EDIT: The eBay seller wrote S5830 instead this digitizer was made for S5830i. So it's obv not working.
Click to expand...
Click to collapse
So it was a wrong description on ebay, send it back and buy the right one