Database Develop

[Q] Gapps problem in verygreen's CM10 for Nook HD+

Hello,
I've scoured the internets and the forum to no avail.
After what can only be described as an ordeal, I finally got verygreen's CM10 to boot from an SD card for my Nook HD+
http://forum.xda-developers.com/showthread.php?t=2032364
However, I cannot get gapps, which is the whole reason one would switch to cm10.
I also could not get adb to ever work, so I just put the zips onto the sd card directly (not the boot partition, but the CM10SDCARD partition), and then loaded recovery mode.
Then I mounted the sd card. Then install zip from sd card. Then choose zip from sdcard. Then I choose the gapps zip.
Then
E:Can't open /sdcard/gapps-jb-20121011-signed.zip
(bad)
Installation aborted.
I don't know what the problem is. I know there were a lot of problems getting CM10 on there to begin with, but now there is no problem.
Which gapps was I using? Xda people pointed me to http://goo.im/gapps/gapps-jb-20121011-signed.zip which is where I got it from.
Please any help or advice.
Thanks,
DG

i suspect a corrupted gapps zip file. perhaps it didn't download fully, or didn't transfer fully to your microsd card ?

hd32 said:
i suspect a corrupted gapps zip file. perhaps it didn't download fully, or didn't transfer fully to your microsd card ?
Click to expand...
Click to collapse
Yes, I agree. Download the gapps file directly to your device and then install via CWM. Sometimes PC antiviral software will corrupt a download on the PC.
Sent from my HD+ rooted stock using Tapatalk

leapinlar said:
Yes, I agree. Download the gapps file directly to your device and then install via CWM. Sometimes PC antiviral software will corrupt a download on the PC.
Sent from my HD+ rooted stock using Tapatalk
Click to expand...
Click to collapse
Thank you both. So, I downloaded gapps directly to the internal memory. Could you advise how to go from there in CWM? Is it mounting the emmc, or the rom? Then is it choose .zip from internal card? It can't mount the emmc...I don't know if there is something I need to do first.

dguenther said:
Thank you both. So, I downloaded gapps directly to the internal memory. Could you advise how to go from there in CWM? Is it mounting the emmc, or the rom? Then is it choose .zip from internal card? It can't mount the emmc...I don't know if there is something I need to do first.
Click to expand...
Click to collapse
No, not to internal memory, to sdcard. Copy now from emmc to sdcard. Then you can flash with cwm.
Edit: BTW, I meant to download with CM10, not stock.
Sent from my HD+ running CM10 on SD with XDA Premium

festlei nature
leapinlar said:
Sometimes PC antiviral software will corrupt a download on the PC.
Click to expand...
Click to collapse
I saw where this was posted, almost verbatim as how you mentioned it.
Does anyone out there ACTUALLY have experience with this happening?
In the 13 years of working on this stuff (tinkering with gadgets, etc) I have never experienced this.

Update:
Today, I finally got it going. Downloaded gapps from CM and it installed like a charm. Now I've got a pretty darn good android tablet for the price. Thanks leapinlar, much appreciated.
abense, i'm, also skeptical that it was actually my antivirus software. I would imagine the software would prevent the download entirely as opposed to just corrupting it. However, it did work when downloading from the nook itself.

abense said:
I saw where this was posted, almost verbatim as how you mentioned it.
Does anyone out there ACTUALLY have experience with this happening?
In the 13 years of working on this stuff (tinkering with gadgets, etc) I have never experienced this.
Click to expand...
Click to collapse
Look at this exchange below. He kept getting corrupt files on download until he turned off his bitdefender.
http://forum.xda-developers.com/showthread.php?p=36035146
Sent from my HD+ running CM10 on SD with XDA Premium

gapps from sdcard for HD
Might be a dumb question but...
I used OP's auto-install version of his HD version of Verygreen's HD+ CM10 sdcard. It installs CM10 to the sdcard no problem. Works like a charm. My Nook HD runs CM10 from the card great. But no gapps.
Would this method you've described work for me? Is there an easier way I'm just missing?
If I load gapps to internal memory, do I then mount the sdcard in CWM and flash gapps to the sdcard that way?

ender1962 said:
Might be a dumb question but...
I used OP's auto-install version of his HD version of Verygreen's HD+ CM10 sdcard. It installs CM10 to the sdcard no problem. Works like a charm. My Nook HD runs CM10 from the card great. But no gapps.
Would this method you've described work for me? Is there an easier way I'm just missing?
If I load gapps to internal memory, do I then mount the sdcard in CWM and flash gapps to the sdcard that way?
Click to expand...
Click to collapse
The install from internal memory option is broken in the SD versions of CWM.
Boot to CM10, browse to goo.im and download gapps-jb-20121011-signed.zip to sdcard. Then use the power menu to boot to recovery and choose install zip from SD, then choose zip from SD. It will probably be in downloads folder.
Sent from my HD+ running CM10 on SD with XDA Premium

leapinlar said:
The install from internal memory option is broken in the SD versions of CWM.
Boot to CM10, browse to goo.im and download gapps-jb-20121011-signed.zip to sdcard. Then use the power menu to boot to recovery and choose install zip from SD, then choose zip from SD. It will probably be in downloads folder.
Sent from my HD+ running CM10 on SD with XDA Premium
Click to expand...
Click to collapse
Thanks. I don't remember seeing goo.im in the apps, but I wasn't really looking. I've used it before in other circumstances. I'll take a look when I get home. Thanks for the help.

ender1962 said:
Thanks. I don't remember seeing goo.im in the apps, but I wasn't really looking. I've used it before in other circumstances. I'll take a look when I get home. Thanks for the help.
Click to expand...
Click to collapse
That is a web site, not an app.
Sent from my HD+ running CM10 on SD with XDA Premium

leapinlar said:
That is a web site, not an app.
Sent from my HD+ running CM10 on SD with XDA Premium
Click to expand...
Click to collapse
Thanks. Never realized it was a web site. I always used goo manager from the app store. Should have realized it was pulling from a web site. I've rooted a bunch of different devices but I'm still finding out how much I don't know. Thanks again.

[Q] CM10 using TWRP

Hi,
I am a little confused, I have followed verygreens , thank you for the work !! , latest post to install CM10 to sdcard. I have created my sdcard and booted into TWRP as directed, then connected to my pc , linuxmint, it connects and shows a 16gb directory with various folders. I have 2 questions:-
1) I thought that the instructions where for installing to sdcard, my sdcard is 8GB , but it looks like it is mounting the nooks internal storage, i have a 16gb nook hd+
and
2) If this is ok, which folder do I need to copy the cm-10-20130212-UNOFFICIAL-ovation.zip file too?
Thanks very much, I hope I have provided enough information to highlight my problem.
Mal

If you have Linux, you do not need to use his new TWRP method to copy the zip to the SD. Just plug the card directly into the PC and copy the CM zip to the SDCARD partition with Linux. Then put the card back into the Nook and boot to TWRP and install the zip.
Sent from my Nook HD+ running CM10.1 on Hybrid SD

leapinlar said:
If you have Linux, you do not need to use his new TWRP method to copy the zip to the SD. Just plug the card directly into the PC and copy the CM zip to the SDCARD partition with Linux. Then put the card back into the Nook and boot to TWRP and install the zip.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
Hi,
Thx for the quick reply, I have found 3 partitions on the sdcard now, one called CM10SDCARD , I assume this is the one to copy the zip file to.
Thx in advance

malnon said:
Hi,
Thx for the quick reply, I have found 3 partitions on the sdcard now, one called CM10SDCARD , I assume this is the one to copy the zip file to.
Thx in advance
Click to expand...
Click to collapse
Yup, that's the one. If you run into any problems, check out the first post in this thread: http://forum.xda-developers.com/showthread.php?t=2032364

Tarthenal said:
Yup, that's the one. If you run into any problems, check out the first post in this thread: http://forum.xda-developers.com/showthread.php?t=2032364
Click to expand...
Click to collapse
Great my first mod and seems to be working !! time to play with it now, thanks to everyone for pointing me in the right direction !!!

[Q][NookHD+] CM10.1 native emmc install

Hi, guys, I am really new to my Nook HD+ coz I received it 2 days ago.
After reading lots of posts, I wanna try the CM10.1 native emmc which I used with other pad.
May I ask after installing it by the method given by verygreen(http://forum.xda-developers.com/showthread.php?t=2263553), is it possible to reset it to the original Nook system with the 8-restart method? Coz I note verygreen says "Note, this version totally overwrites your ROM, so back up everything important before proceeding".
Thanks very much!

If you replace the stock recovery with one of his recoveries (CWM or TWRP), the 8 failed restart no longer works. If you only install his ROM and not the recovery, the 8 failed restart still works.
But if you use his CWM SD to do a nandroid backup before you install his ROM, you can restore that one later so you get stock back.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
If you replace the stock recovery with one of his recoveries (CWM or TWRP), the 8 failed restart no longer works. If you only install his ROM and not the recovery, the 8 failed restart still works.
But if you use his CWM SD to do a nandroid backup before you install his ROM, you can restore that one later so you get stock back.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks very much for your reply.

cant unzip the cwm image
i am new to installing roms i have used cwm before but the link for the cwm image is not downloading the same as normal and letting me extract the files then burn to sd etc. do i just write the cwm.early4 file as is when i download it? i'm not understanding why its different than the usual zip files and is an 8g sd card large enough? thanks for your time i realize explaining things to us noobs is frusterating

Drew6885lovesMods said:
i am new to installing roms i have used cwm before but the link for the cwm image is not downloading the same as normal and letting me extract the files then burn to sd etc. do i just write the cwm.early4 file as is when i download it? i'm not understanding why its different than the usual zip files and is an 8g sd card large enough? thanks for your time i realize explaining things to us noobs is frusterating
Click to expand...
Click to collapse
No, don't use early4. If you want to install the CM to emmc, you must use the CWM that he has in the emmc thread (early 2.1). It should unzip to 1GB and can be burned to a 1GB or larger SD. Don't confuse it with the other cwm zip (that he calls CWM recovery) that is meant for flashing CWM to emmc.
Sent from my SCH-I800 using xda premium

leapinlar said:
If you replace the stock recovery with one of his recoveries (CWM or TWRP), the 8 failed restart no longer works. If you only install his ROM and not the recovery, the 8 failed restart still works.
But if you use his CWM SD to do a nandroid backup before you install his ROM, you can restore that one later so you get stock back.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks very much.
I have some more problems, can you help me?
I installed verygreen's CM10.1 native emmc install without replacing the internal recovery. It works well but I found sth wrong.
1. Sometimes the wallpaper cannot be full screen after changing from landscape mode to portrait mode.
2. For the lock screen sider shortcut, I cannot do any modification in the setting and for the phone and sms icon, when I move to them, it says error.
Thanks!

rambo419 said:
Thanks very much.
I have some more problems, can you help me?
I installed verygreen's CM10.1 native emmc install without replacing the internal recovery. It works well but I found sth wrong.
1. Sometimes the wallpaper cannot be full screen after changing from landscape mode to portrait mode.
2. For the lock screen sider shortcut, I cannot do any modification in the setting and for the phone and sms icon, when I move to them, it says error.
Thanks!
Click to expand...
Click to collapse
I don't know the answers. You would get better results in the emmc CM10.1 thread. But maybe someone else will answer here.
Sent from my Nook HD+ running CM10.1 on emmc.

Thanks all the same.
Sent from my Barnes & Noble Nook HD+ using xda premium

[Q] nook hd emmc cm 10.2 nightly cant flash leapinlar`s sdswap?

Hi,
Can't post in development thread as new here. I successfully flashed the cm 10.2 nightly /(3rd sept) to my nook hd emmc but when trying to flash leapinlar`s sd swap for cm 10.1-10.2 it errors in cwm saying product ovation where's the HD is hummingbird? There's only one file for both devices HD and HD plus can anyone help with this?
Cheers,
Hugest

hugest_uk said:
Hi,
Can't post in development thread as new here. I successfully flashed the cm 10.2 nightly /(3rd sept) to my nook hd emmc but when trying to flash leapinlar`s sd swap for cm 10.1-10.2 it errors in cwm saying product ovation where's the HD is hummingbird? There's only one file for both devices HD and HD plus can anyone help with this?
Cheers,
Hugest
Click to expand...
Click to collapse
I will look at the zip to see if it needs to be modded and get back to you.
Edit: You were right, there was an assert error in the zip. Fixed in rev6 now.
Sent from my Galaxy Tab 2 using XDA Premium

leapinlar said:
I will look at the zip to see if it needs to be modded and get back to you.
Edit: You were right, there was an assert error in the zip. Fixed in rev6 now.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
Thanks for the rapid response and great work dude. Will give rev 6 a whirl now.
Hugest

Hi,
Ok that installed ok but still having issues: on boot all apps and processes crash (stop responding) when unlocking the nook if I clear cache in cwm it boots fine and I can see that the swap has occurred internal still shows 5gb but is actually my 32gb sd card. However I can't side load any apps I get an app not installed message even though unknown sources is ticked also as soon as I reboot the nook its back to square one and all the processes and apps crash.
I never saw any instructions for installing this i simply flashed from cwm recovery. Is there a set install order or process for this maybe I'm doing something wrong? I.e. does it need cm 10.2>sd swap>gapps all on initial flash? The only thing I can think is I'm installing the sd swap after I have installed a few apps
Cheers for the help,
Hugest

hugest_uk said:
Hi,
Ok that installed ok but still having issues: on boot all apps and processes crash (stop responding) when unlocking the nook if I clear cache in cwm it boots fine and I can see that the swap has occurred internal still shows 5gb but is actually my 32gb sd card. However I can't side load any apps I get an app not installed message even though unknown sources is ticked also as soon as I reboot the nook its back to square one and all the processes and apps crash.
I never saw any instructions for installing this i simply flashed from cwm recovery. Is there a set install order or process for this maybe I'm doing something wrong? I.e. does it need cm 10.2>sd swap>gapps all on initial flash? The only thing I can think is I'm installing the sd swap after I have installed a few apps
Cheers for the help,
Hugest
Click to expand...
Click to collapse
Remember this is a kludge, so everything does not work perfectly. I have found that sideloading apps from one of the SDs (I can't remember which) fails. Just copy the apk to the other one and try. And the setting storage shows wrong.
But I have not had apps and processes crash. If you have apps that were using internal for media storage, you may have to move their media files from internal to external. Like you say, you may want to start fresh with CM10.2, gapps and swap before you install any apps.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Remember this is a kludge, so everything does not work perfectly. I have found that sideloading apps from one of the SDs (I can't remember which) fails. Just copy the apk to the other one and try. And the setting storage shows wrong.
But I have not had apps and processes crash. If you have apps that were using internal for media storage, you may have to move their media files from internal to external. Like you say, you may want to start fresh with CM10.2, gapps and swap before you install any apps.
Sent from my Nook HD+ running CM10.1 on emmc.[/QUOT
Hi,
ok I cant seem to get this working. I have a similar mod on my S3 which works perfectly. I have done the following:
1) Tried it WIth 10.1 RC3. Boot to recovery wiped data and cache flashed 10.1 RC2 > GAPPS > SDSWAP on boot the swap hasn't happened if I then reboot and flash the swap again and go into storage the calculating space hangs at calculating and no apps will open when you click on them.
2) as above but tried flashing 10.1 RC2 > SDSWAP >GAPPS exactly the same results as above.
So it doesn't seem to work with 10.1 or 10.2?
EDIT: This is driving me insane lol
Ok if I flash the cm 10.1 and SDSWAP then look at es file explorer the swap has worked and apps open ok SDCARD0 shows 29GB and SDCARD1 5GB but I have the same issue as with 10.2 if I try and install an .apk from SDCARD0 it opens and displays the app permissions as normal then as soon as you click install you get an app not installed message ? IF I copy the .apk to SDCARD1 (the internal) I get a problem parsing package error. So the swap works but I cant install any .apk's
Cheers,
Hugest
Click to expand...
Click to collapse

I told you that settings/storage does not work. Why try it again and be surprised that it does not work?
And I just tested it again on the HD and install fails if you try from the real external SD. But it works from the internal SD. And I get no app crashes.
This is on the 7/08 CM10.1 from verygreen. I will now try on CM version.
Edit: I just updated to CM10.1 RC2 and it works the same.
Sent from my Nook HD+ running CM10.1 on emmc.

soffero anchor
leapinlar said:
I told you that settings/storage does not work. Why try it again and be surprised that it does not work?
And I just tested it again on the HD and install fails if you try from the real external SD. But it works from the internal SD. And I get no app crashes.
This is on the 7/08 CM10.1 from verygreen. I will now try on CM version.
Edit: I just updated to CM10.1 RC2 and it works the same.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Ok Thanks for checking that's strange as it definately doesn't work for me. I will just have to use the SD Card Install instead as I only have an 8gb nook and its not enough space.
Cheers,
Hugest

[Q][HD+]Is there a way to increase storage capacity via SD swap or Kernel?

My 16 GB Nook HD+ has about run out of memory, and I notice that it doesn't use the SD Card for anything...which means there's about 30 gbs available for use on whatever.
I was wondering if, outside of a CM 10.1 SD install, there's a way to increase storage capacity via a storage swap (like the SD swaps on the Galaxy phones) or storage Kernel(similar to the Stock SD swap for the Rooted Stock Rom)?

neoage said:
My 16 GB Nook HD+ has about run out of memory, and I notice that it doesn't use the SD Card for anything...which means there's about 30 gbs available for use on whatever.
I was wondering if, outside of a CM 10.1 SD install, there's a way to increase storage capacity via a storage swap (like the SD swaps on the Galaxy phones) or storage Kernel(similar to the Stock SD swap for the Rooted Stock Rom)?
Click to expand...
Click to collapse
Yes, look in my HD/HD+ CWM thread. I have a swap zip for stock. It does not need to be rooted.
Sent from my Galaxy Tab 2 using XDA Premium

leapinlar said:
Yes, look in my HD/HD+ CWM thread. I have a swap zip for stock. It does not need to be rooted.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
I'm currently rooted, using Carbon Rom. Would that kernel still work?

neoage said:
I'm currently rooted, using Carbon Rom. Would that kernel still work?
Click to expand...
Click to collapse
It is not a kernel change. It is a script that is run at boot time. And I don't know if it will work on Carbon. But since Carbon is based on CM, it might work to use the zip for swapping on CM.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
It is not a kernel change. It is a script that is run at boot time. And I don't know if it will work on Carbon. But since Carbon is based on CM, it might work to use the zip for swapping on CM.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I ran the script, the "SDSwap for CM 10.1 EMMC" and it didn't work, it gave me an error stating that it couldn't find CM. I ran the NookHD+ SDSwap and it installed without errors, but I still see my internal memory at 12 gbs.
Anything else I could try? Or maybe I flashed it wrong? I flashed it via a CWM Boot SD that I made.

neoage said:
I ran the script, the "SDSwap for CM 10.1 EMMC" and it didn't work, it gave me an error stating that it couldn't find CM. I ran the NookHD+ SDSwap and it installed without errors, but I still see my internal memory at 12 gbs.
Anything else I could try? Or maybe I flashed it wrong? I flashed it via a CWM Boot SD that I made.
Click to expand...
Click to collapse
I ran the script and when I looked at Settings->storage that the internal card stats showed in internal and sdcard. But, when I attached to PC, exactly what i wanted happened. The internal and ExtSdcard are swapped.

neoage said:
I ran the script, the "SDSwap for CM 10.1 EMMC" and it didn't work, it gave me an error stating that it couldn't find CM. I ran the NookHD+ SDSwap and it installed without errors, but I still see my internal memory at 12 gbs.
Anything else I could try? Or maybe I flashed it wrong? I flashed it via a CWM Boot SD that I made.
Click to expand...
Click to collapse
What rom are you running? Are you running rev6 of the swap zip? This version is for official CM only. The title says that and the CM not found message says that.
And that second swap you ran is for stock.
Edit: I see from your post earlier that you are running the Carbon ROM. The zip is designed to abort if not an official CM ROM. Extract the 11extsd2internalsd file from the zip and copy it to a new folder /data/local/userinit.d and set its permissions to execute in all three boxes. (Since you flashed that other zip, there may be a file 11SDswap there. Delete it.) Reboot and see if if it worked. If not, delete the file.
Sent from my Nook HD+ running CM10.1 on emmc.

Yes, Carbon Rom. That same script is what I currently use on my phone, so I'm quite familiar with it. I'll try it now.
Has the script been modified for the Nook, or is it as-is?
Sent from my Nook HD+ using XDA Premium HD app

neoage said:
Yes, Carbon Rom. That same script is what I currently use on my phone, so I'm quite familiar with it. I'll try it now.
Has the script been modified for the Nook, or is it as-is?
Sent from my Nook HD+ using XDA Premium HD app
Click to expand...
Click to collapse
It has been modified for the HD/HD+.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
What rom are you running? Are you running rev6 of the swap zip? This version is for official CM only. The title says that and the CM not found message says that.
And that second swap you ran is for stock.
Edit: I see from your post earlier that you are running the Carbon ROM. The zip is designed to abort if not an official CM ROM. Extract the 11extsd2internalsd file from the zip and copy it to a new folder /data/local/userinit.d and set its permissions to execute in all three boxes. (Since you flashed that other zip, there may be a file 11SDswap there. Delete it.) Reboot and see if if it worked. If not, delete the file.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
king200 said:
I ran the script and when I looked at Settings->storage that the internal card stats showed in internal and sdcard. But, when I attached to PC, exactly what i wanted happened. The internal and ExtSdcard are swapped.
Click to expand...
Click to collapse
leapinlar said:
It has been modified for the HD/HD+.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Good news! I've figured out how to make this work, AND with my SDXC FAT32-formatted 64 GB sd card!
Here's what I did:
1 - Extracted the 11extsd2internalsd file from the "SDSWAP for CM 10.2" zip
2 - Copied that over to my 64 GB SD card
3 - Once inside, make sure you're rooted, use a root explorer App (Root Explorer or ES File Manager, ES Explorer)
4 - Paste the file in the System/Etc/init.d folder (in internal memory)
4.5 - Tap & Hold over the file, tap Permissions, and enable all 3 "Execute" options.
5 - Download a script manager app
6 - Install, enter the program, click on "browse as root", and tap OK.
7 - Navigate over to the system/etc/init.d folder
8 - tap on the icons for SU and Boot.
9 - Save
Once you reboot, you'll notice that your internal storage is now your SD Card's storage capacity!
NOTE:
Copy over ALL your internal memory over to your SD Card for this to 100% work. If not, you'll wind up with a bunch of errors.
I've seen that reinstalling the ROM & Gapps over this new one(dirty boot) apparently solves the problem, but I haven't tried that yet.
ONLY for advanced users.
EDIT: Apparently moving the files from MNT/SDcard over to /ExtSDCard doesn't work like it does on the phones...I'l research this further...THere has to be something to move over to the external SDCard prior to the script enable for this to work flawlessly.

The script works. If it is init.d folder, you shouldn't need Smanager. I'm thinking the script might execute earlier in boot process without a script app.

king200 said:
The script works. If it is init.d folder, you shouldn't need Smanager. I'm thinking the script might execute earlier in boot process without a script app.
Click to expand...
Click to collapse
I tried it with and without. With Smanager, I got in and, of course,it had a bunch of errors. Without Smanager, it wouldn't work as well, since it'd only recognize internal memory as extSDCard AND SdCard and nothing I did would stop the errors.
What I'm trying to figure out is, why? Anything in init.d runs on its own, yet in my case, even before I experimented with script manager, it didnt recognize it.
Now I have another dilemma - What do I move over to the SD Card, and in what file structure, to make this work efficiently?

neoage said:
I tried it with and without. With Smanager, I got in and, of course,it had a bunch of errors. Without Smanager, it wouldn't work as well, since it'd only recognize internal memory as extSDCard AND SdCard and nothing I did would stop the errors.
What I'm trying to figure out is, why? Anything in init.d runs on its own, yet in my case, even before I experimented with script manager, it didnt recognize it.
Now I have another dilemma - What do I move over to the SD Card, and in what file structure, to make this work efficiently?
Click to expand...
Click to collapse
Did you set the permissions for the script file to execute. And you can just as easily put the script in /data/local/userinit.d. That is automatically loaded by init.d (see the 90 script in init.d). That way you do not need to edit each time you flash an updated ROM.
Edit: But maybe Carbon does not have that 90 script? If it doesn't that would explain why my script did not work.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Did you set the permissions for the script file to execute. And you can just as easily put the script in /data/local/userinit.d. That is automatically loaded by init.d (see the 90 script in init.d). That way you do not need to edit each time you flash an updated ROM.
Edit: But maybe Carbon does not have that 90 script? If it doesn't that would explain why my script did not work.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I don't think so. As a matter of fact, I went through all 3 available Carbon Roms today and each was worse than the last when it came to this. I noticed that in each rom, (Unnofficial-Custom, Xperia, and Unofficial-Basic) init.d behaves differently - in basic, it accepted the file without problem, whereas in Xperia, the file needed scriptmanager to function. Unofficial Custom however, downright neglected it and kept me in a bootloop, which is where I am now.
I don't think it has anything to do with the rom itself, however. I believe that, for some strange reason, each time I've used my CWM SD card, the HD+ has been using up its resources to the point where the Nook itself won't boot CWM anymore, as if wiping Data, Data/Media, and Cache haven't cleaned up the necessary files to start fresh. That's another topic, though.