Hello ! This time I messed up real bad.I was trying to install a CWMRecovery.Somehow got to this thread http://forum.xda-developers.com/showthread.php?t=1877270&page=105 and downloaded the Jellybean leak(it was only later I discovered it was for Galaxy S II).I flashed it in recovery mode but installation failed.I treid it again and still failed.The I tried rebooting my phone (recovery menu option) and nothing happened and removed the battery.Now the phone does not turn on at all.No recovery,no download mode nothing.I tried charging it,plugging usb,still nothing.The battery is not the fault ,because I tried it on another phone and it worked properly.Please help me !!!
pawKer said:
Hello ! This time I messed up real bad.I was trying to install a CWMRecovery.Somehow got to this thread http://forum.xda-developers.com/showthread.php?t=1877270&page=105 and downloaded the Jellybean leak(it was only later I discovered it was for Galaxy S II).I flashed it in recovery mode but installation failed.I treid it again and still failed.The I tried rebooting my phone (recovery menu option) and nothing happened and removed the battery.Now the phone does not turn on at all.No recovery,no download mode nothing.I tried charging it,plugging usb,still nothing.The battery is not the fault ,because I tried it on another phone and it worked properly.Please help me !!!
Click to expand...
Click to collapse
Have you tried a USB jig?
It forces the device to boot into download mode and then you can flash with Odin
You could have a look in the wiki theres a point how to recover from a brick
If its not working tell me back
Related
Hi all,
My SGS is stuck in a bootloop, and as the title says I cannot acces the Recovery Mode.
Actually, the Download mode is accessible, however the phone shut down and go back in bootloop after less than 10 seconds. So I don't have enought time to flash another ROM.
I success once to boot my phone without any problem, but after some minutes it rebooted and was gone back into this bootloop problem.
Please, help me
anyone has any idea to help me fix this problem ?
There is a thread on how to access recovery mode using a homemade JIG or take to the service center.
ask on darkyrom its aforum for sgs phones you will get help their goodluck
solutions
Only solution is to flash stock gingerbread version via Odin
sym86 said:
Hi all,
My SGS is stuck in a bootloop, and as the title says I cannot acces the Recovery Mode.
Actually, the Download mode is accessible, however the phone shut down and go back in bootloop after less than 10 seconds. So I don't have enought time to flash another ROM.
I success once to boot my phone without any problem, but after some minutes it rebooted and was gone back into this bootloop problem.
Please, help me
Click to expand...
Click to collapse
ok so connect your phone up to odin and put your phone in download mode and flash your stock rom.should work
Enter download mode using 3 button combo and reflash stock rom..
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
You will hadware buttons failure when you flash a i9000 ROM on an Anycall M110S ( Korean Galaxy S) , so I am curious are you sure your phone is not an Anycall M110S? since you also getting Anycall boot screen...sounds odd, that i9000 will do that.
For USB connection problems , just try link on Quick Fixes and Solutions link below
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
Go back your original firmware...
Any updates to this?
I am having a similar situation. I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000. It is now stuck in recovery mode. I tried doing factory reset and wiping the cache and dalvik cache and tried reflashing. Everything goes fine but gets stuck in the recovery mode - more correctly in download mode but the download mode logo flashes twices and enters to recovery mode.
Any possible solutions to get me out of this mess?
Thanks,
Sid
your problem will be solved with this post:
http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
Edit : above url is for S+ your device is S , sorry .
Thanks, but anything similar for Galaxy S? And remember my download mode does not stay, if flashes twice and runs into recovery mode. So if your solution is something to do in recovery mode it will be helpful (or if your solution is to first make me stay on download mode and then flash something using odin I will be thankful)
Regards,
Sid
sidswami said:
I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000.
Click to expand...
Click to collapse
Check your Model, Anycal does not make GT I9000, it makes only M110S and firmwares / solutions for them vary.
If you have Anycal M110S visit PIT STOP link below to solve your problems
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
you can get a rescue kit from My Android Collections and or a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.
worked for me
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
beben3 said:
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
Click to expand...
Click to collapse
Glad that worked for you, but I for some reason can't be so lucky. I tried to also flash CWM 10 but after the home key not working I decided to flash Slim Bean and now I am stuck. My phone isn't even recognized by Odin any more and I have tried different USB ports and even my laptop with Heimdall. I don't know what to do at this point, but any kind of suggestions would be great. Usually when I get stuck I just flash back to Stock and start all over with a new ROM or kernel but I have no idea where to go from this point.
First off, upon trying to install the MindCr_Rom_v2.8 ROM on my Ace, installation went good. After installation went good and completed as it should. Got CWM already. when rebooting that's it phone got bricked. I cant go to Recovery or Download Mode, phone doesn't power on, when inserted USB cable for charging charging icon doesn't show up, NOTHINGis happening, any ideas, solutions please please please!
androlinu said:
First off, upon trying to install the MindCr_Rom_v2.8 ROM on my Ace, installation went good. After installation went good and completed as it should. Got CWM already. when rebooting that's it phone got bricked. I cant go to Recovery or Download Mode, phone doesn't power on, when inserted USB cable for charging charging icon doesn't show up, NOTHINGis happening, any ideas, solutions please please please!
Click to expand...
Click to collapse
I'm facing the same problem... from what i know after i asked some people in another forum they told me this rom MindCr_Rom_v2.8 ROM is for s5830i, that's why after reboot nth appear, i'm still looking for way to enter recovery mode... i m stuck as well... anyone can help????
Thanks
If you can enter download mode, flash a stock ROM via Odin.
If not, too bad, amigos
Sent from my pet - Megatron™
Did you install it using CWM or ROM Manager?
Never use ROM Manager on the Ace! If you did, your phone is hard-bricked.
OK... so a couple of days ago a friend of mine screwd my phone when he tried to install clockwork recovery without rooting, I was stuck at Samsung logo, no recovery, only download mode... so today after going through tons of threads so I could use Odin with ace on win8.. I finnaly managed to un**** it... so I could re**** it again... so I followed this thread after reviving the phone. http://forum.xda-developers.com/showthread.php?t=1034145
After rooting and instaling cw, I tried to install a ROM on it, namely nightly cm (found somewhere here: http://forum.xda-developers.com/showthread.php?t=2188679)... I got a status 7 error cause of the assertion, which in removed, after successfully installing the ROM (or so recovery mode said) I tried reboting and it no longer turned on. Doesn't seem to charge and it won't boot...
The only things I can think of that i did wrong were:
Having under 50% battery life
Not removing sim card
PS: also before installing ROM I cleared caches and reset to fact. Settings
Any ideas on how to fix this? If not, what did I do wrong here?
EDIT: ok so i think i figured out what i did, i wanted to download this rom: http://forum.xda-developers.com/showthread.php?t=2199575 ... i went to the "external webstie" to download, and i think i downloaded this rom "android cm_skate-userdebug-cm-10.2 (stable)" which it seems its not for my phone :S ...
Is it possible to boot into download mode now? would a usb jig work? something like this: http://forum.xda-developers.com/showpost.php?p=8822843&postcount=1
Or is it a lost cause?
Thanks...
PS: oh god, to think i removed the assertion that was saving my phone... ahh **facepalm** , why didnt i read the damn assertion...
wrong man said:
Is it possible to boot into download mode now? would a usb jig work? something like this: http://forum.xda-developers.com/showpost.php?p=8822843&postcount=1
Or is it a lost cause?
Click to expand...
Click to collapse
If you want to use stock rom again then flash stock rom via odin through download mode. to get to download mode, press volume down + home + power button at the same time until it shows a small "downloading..." word. For further info, How to upgrade, root & flash Samsung Galaxy Ace S5830
-BRK- said:
If you want to use stock rom again then flash stock rom via odin through download mode. to get to download mode, press volume down + home + power button at the same time until it shows a small "downloading..." word. For further info, How to upgrade, root & flash Samsung Galaxy Ace S5830
Click to expand...
Click to collapse
Thanks for the answer, i know the "shrotcut", as i said in the op i used odin allready, but the big issue is the phone does not react to the power button, idk what the rom i installed did, if its bricked or if its just expecting a different input rather than the supposed power button, in which case the jig should work...
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Samsung logo freeze, cant recovery, can download mode (cant join to pc)
try with different usb cable
daniga74
Fariel2012 said:
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Click to expand...
Click to collapse
Hi there
you will need to give a usb jigg service to your device and then flsah it back to stock using odin
SGA s5830 stuck @ boot logo
I follwed these steps before it stuck @ boot logo
1 rooted phone through root_S5830.zip file
2 then used 6.0.4.6-cooper_fix.zip cwm recovery
3 decided to flash Touchwiz-Resurrected_ROM_V1.0.zip rom
4 followed all steps to flash thrrough CWM recovery
phone reebots samsung.com logo>> samsung boot animation shows up>>samsung name appears again keeps glowing and phone restarts!!!
after it I tried 6-7 different roms then i tried to flash through odin but wasnt able to do so but failed the device showed up in odin but wasnt able to flash stock rom
then i decided to go for Phil touch recovery I installed Philtouch recovery and tried to flash a custom rom now I'm stuck again at boot name GALAXY ACE s5830 nothing goes further!!!
I searched over XDA and some guy quoted this problem is solvable by using odin and putting phone in downloading mode (vol- button+home button + Power on ) I am able to put my phone in downloading mode, but when i conncet it to PC it says USB device not recognized WTF!!!!!???? 10 mins ago i connected my Phone using same cable same port same odin now this ***** appears ???
I swapped PC's, Cables, ports everything nothings working , phone wont start stuck @ boot logo pls help ASAP :crying:
That's it.. You have hard bricked your phone that's dead recovery and dead download mode. Give your phone the usb jigg service which will force it to go to either the download mode or the recovery mode whatever you want.