Related
So I've been on GB, and All this new ICS screenshots are tempting. I've heard about the Brick Bug, and apparently some say It can be Resolved Now!
I wanna Install the Latest ICS (Poland LPY 2012 MAY), and Im not a CM9 fan, because I need the Spen, FM Radio. and Just wanna know the following.
1. What is the Safest way to Install this ICS Rom -PC-odin,Mob-Odin ?
2. Should I root, or Not - How?
3. Is CF-Root safe now, I see there's a new version(5.6) ?
Thanks and Best Regards,
J!
1. I'd say PC Odin. Grab proper firmware, it'll be 1 file. There are few topics around with stock firmwares.
2. If you're not going to flach custom ROMs like CM9 - not necessarily. You might need it for some system customization etc. How ? ZergRush method. Dr. Ketan posted a thread with automated process for all firmwares, just select yours.
3. Yes.
Akiainavas said:
1. I'd say PC Odin. Grab proper firmware, it'll be 1 file. There are few topics around with stock firmwares.
2. If you're not going to flach custom ROMs like CM9 - not necessarily. You might need it for some system customization etc. How ? ZergRush method. Dr. Ketan posted a thread with automated process for all firmwares, just select yours.
3. Yes.
Click to expand...
Click to collapse
Thank you for the earliest response Akiainavas!
No Custom Roms, Just Modifications. I never install Custom Roms that float around the forum, If dsixda works well, I will try to manually deodex the ROM im on. IS that Safe ?
Thank you Once again!
where to go from a rooted stock gb rom?
just brought my note rooted using ketan guide,im currently on gb,i want ics with premium s suite stable and faat,any suggestion shall i get an ota ics update,bcoz the brick bug is scaring me from installing custom rom
Entropy512 said:
Kernels that have been confirmed safe:
All known Gingerbread kernels for the Galaxy Note and other affected devices listed above
Kernels built from the GT-I9100 Update4 source code release - this includes XplodWILD's CM9 release and my DAFUQ release, hopefully more kernel choices will become available soon
Kernels with MMC_CAP_ERASE removed from mshci.c should be safe - look for it in the listed features of any kernel based off of N7000 Update3. (N7000 Update3 source code without this change made to render it safe is dangerous.)
Click to expand...
Click to collapse
Chainfire said:
I have patched the CWM included in the v5.6 CF-Root kernels, so CWM will no longer trigger the bug. But, I cannot be 100% certain that patch works. I have done about 50 restores and wipes today (both can trigger the bricking bug) and my device is still fine. But, I may have gotten lucky, or my device may not be affected at all.
In the same way, we will not know which stock Samsung kernels do or do not have the bug. Until they update their source and we see the problem is fixed (or Samsung outright tells us), any Samsung firmware release is suspect - and we won't know if the bug is present until somebody hardbricks on that kernel
Thus keep in mind, while I think CWM recovery will no longer trigger the problem (but I cannot guarantee it), the problem *is* actually still present in the kernel itself. As far as we (and the Android developer who released a lot of information about this) know, nothing else triggers the code that triggers the bug, but to be safe, I wouldn't be using the factory reset function in Android itself, or anything like that.
Beware: update.zip's can trigger the bug if they use "format" commands!
There is and cannot be any guarantee for CF-Root. You use it at your own risk. If you wan't to be safer, use a custom-built kernel of which the developer claims the problem is patched.
Click to expand...
Click to collapse
This is the information that you need if you want the premium suite. Avoid the stock ICS kernel like the plague until Samsung fixes it, until then just know that there is an elevated level of risk involved.
I am personally very comfortable with Mobile Odin as the instructions are all carried out on-device, much more comfortable than I am with PC Odin because with PC Odin you have to rely upon the USB connection for communication. Both should be fine, but I do feel Mobile Odin does have some significant advantages.
Ok, i know this must be here somewhere but i just can't find it. Too much time digging i guess....
I'm tired of waiting for samsung to release a solution and want to try something else.
Currently i'm on ics with lpy (german stock) so i have the famous problem (already checked). Here's the doubt: if i go back to gb with pc odin won't i have a chance to brick my device ?? I'm talking to dload an official gb rom (from dr ketan's thread) and do it as it's supposed to be done.
If i brick it will it be "the one"??
Second doubt: what rom can i flash safely?? I read a lot of threads with a lot of kernels and so far the only ones mentioned to be safe are cm9 and franko...... So basicly i need a rom with one of those??
So i can just do it like this: flash gb with pc odin, dload rom (and kernel) from what i like?? After i tried it out and don't like it and with a supposed safe kernel i can alway flash a new rom ?? No possibilty to superbrick it??
What is currently the best combination regarding battery and performance since they all claim the same............?????
Another (stupid) question: every time i flash an unofficial rom it will increase the counter or with the newer ones this is annulled? I know with a jtag i can clear them.
So basicly i'm confused and afraid to play around with this device. I have flashed other android devices in the past and did a bit of reading, the only thing that still is unclear is the possibility of superbrick........
Thanks for the help,
becosemsaida
Speedmod and Dafuq kernels are safe as well. Basically you are good to go with the knowledge you have.
Flash an older GB rom with PC Odin without the hardbrick risk, root it and flash a CWM kernel and then flash a rom based on CM9 or any safe kernel, just stay clear of roms based on official Samsung roms unless you replace the kernel with a safe one and never wipe data, cache or Dalvik on an official ICS rom.
I've been using the official AOKP rom, build 39 at the moment. It's fast, smooth, great battery life and excellent customization, based on the CM9 kernel so it's safe from the superbrick.
If you use a safe rom you can use CWM to wipe and flash other roms without the risk of superbricking.
same as above, flashed rootable GB then rooted using cfroot... and waiting for samsung to release the fix
I had the same problem I was afraid to be on the official ICS and last week I had solved like previous members said.
- First I flashed GB rom (I preferred KKA because it is directly rootable which dr.ketan mentioned it on his root guide)
- Then I rooted it with zergrush (see dr.ketan's root guide) it is the easiest way to root the device without yellow triangle
- After that I have flashed Paranoid Android ICS rom which is based on CM9 and is totally safe against the superbrick bug. It is also really exciting to use my Galaxy Note on the tablet mode with this rom I can recommend it to you.
Anyway if you really dont want to use any of the custom roms you can also flash ICS but not with its original kernel because it is totally risky.
you can use Mobile Odin and before flashing you can select an ICS stock rom but you have to change the kernel with speedmod or franco kernel. then with this combination you can flash and wipe your data after flash completes.
most of the people says that the bug is in the official ICS kernels and it triggers the emmc bug which superbricks the device. So with the other custom kernels you should be safe.
As final words I still would say that the safest way is to flash a custom ICS rom which is not based on official ICS roms. For example Paranoid is a CM9 based rom and is totally safe.
So decision is yours dude
Hi, I have an international varient of the Galaxy Note GT N7000 which using Chainfire's Got Brick App v1.1 says:
eMMC Chip
Type: VYL00M
Revision: 0x19
Verdict: Danger! This eMMC chip is "Known" to have the brick bug!
I once had installed a custom Kingdroid ROM v3 and wiped it but it had resulted in a Hardbrick/Superbrick so i had to take it Samsung Service Center to get it fixed. They have repaired it and given me back the handset with the Stock ICS ROM. Here are the details:
Model Number: GT-N7000
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.15-N7000JPLPD-CL643396
[email protected]#3
SMP PREEMPT Thu May 31...
Build Number: IM74K.JPLPD
Now i have done some researched and found that this bug is only triggered with kernels (ICS stock & leaked) which have the eMMC_Erase function/command. GB kernels are not known to have this erase function so they are safe.. Also the two safe kernels are franco r3 and speedmod k3 (Correct me if im wrong). Can anyone please guide me on the following:
1) Should I flash Stock Gingerbread OR ICS Kernel(franco/speedmod)?
2) Should I use Recover or ODIN?
3) Plz Provide the links for the Kernels - Franco R3 & Speedmod K3 which are safe?
4) Will the above Kernels provide root access?
5) Is abyss kernel safe (because it supports GPU overclock)?
6) Can i flash an ICS kernel over a Gingerbread ROM?
For answering please answer in a similar numbered way so that it is easy to read and understand for me as well as future audience! Thanking everyone who takes time to read and answer!
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
You Flash it in Odin, It will give you CWM and Root too !
Ive attached the kernel to the post for you.
Abyss kernel is safe, But its for GB ROMs only, You are on ICS so it wont work.
I dont know if you can flash ICS kernel over GB ROM, However, Your are on ICS so you shouldnt need to worry about that.
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
azzledazzle said:
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
Click to expand...
Click to collapse
Thanks for the confirmation mate, one more thing to ask you: Is the speedmod kernel faster than the stock ICS kernel? Is there any flaws such as battery drain/WIFI problem with it? Also does it support GPU OC? Thanks once again for your help!
little-vince said:
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
Click to expand...
Click to collapse
Firstly get your Galaxy Note checked using Chainfires App (Gotbrick v1.1). If the verdict says "Danger" only then does your device have this problem. My Galaxy Note (Rev 0x19) had this problem and came with GB out of the box and i upgraded it to ICS through Samsung Kies and it worked fine. So i do not think that while updating to ICS via Kies will cause this problem. As of what i know it is triggered when a command eMMC errase is triggered when either doing a factory reset or wipe through recovery. The update as such did not brick my device, however this does not mean it cannot brick yours. I am no expert on this so be a little cautious while updating. I would suggest stick to GB until Samsung Releases a safe stock ICS ROM with a safe Kernel. Cheers!
really easy
1: (optional ) in GB do factory reset (after you have made a backup with TB)
2: put phone in Download mode.
3: use PC odin flash STOCK ICS rom
4: reboot device let it load
5: put device back into download mode
6: use PC ODIN flash Speedmod k3-3
7: reboot
8: launch CWM and tell it to reboot in cwm recovery
9: load your custom rom of your choice
i HIGHLY recommend doing ONLY THE FACTORY RESET WIPE data and cache in GB before you start anything.
ONCE you are in ICS and have successfully loaded speedmod or franco's kernel then it is safe to do a factory wipe if you want. but ONLY after one of those 2 Kernels are on your device.
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
rp4k said:
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
Click to expand...
Click to collapse
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
little-vince said:
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
Click to expand...
Click to collapse
Yes, this bug is known to trigger usually when you do a wipe using the recovery. However there have been some cases when doing a factory reset via the settings has also resulted in a brick. However if you stay away from recovery and do not intend to doing flashing/wipes then i guess you should be ok. And it is a matter of time before Samsung Comes up with a solution. They are said to be working on this bug already. I have the N7000 which i bricked once while flashing and then wiping but i got it repaired since i had warranty. Since then i have stayed away from wiping or installing any custom roms so the device has not given any problems. Hope this info helps! Cheers!
Rom doesnt load during boot
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
cuteglen said:
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
Click to expand...
Click to collapse
What rom are you on? Have you performed any wipes or factory resets?
Sent from my GT-N7000 using xda premium
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
SpyderTracks said:
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
iraqi4ever80 said:
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
Click to expand...
Click to collapse
Only from GB kernel such as abyss. If you flash from ics kernel you WILL brick. This goes for all cm based roms.
Sent from my GT-N7000 using xda premium
kyllerbuzcut said:
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
Click to expand...
Click to collapse
Hiya, yep, you can just delete the zimage file, no need to replace, it will just skip writing that partition.
Sent from my GT-N7000 using xda premium
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Try mobile odin. If you point to the tar, it should load all the components. You can then review which components are being flashed.
Sent from my GT-N7000 using xda premium
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Add goku, dafuq, gl-notecore and abyss42 (GB) to your list.
2. Only do it from a GB firmware or at least a GB kernel like abyss42. SPECIFIC instructions per firmware is listed for a reason. Follow those instructions to the letter.
3. No.
Sent from my GT-N7000 using xda app-developers app
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Stock rom in a zip? Are you sure you are nit flashing a custom rom? Point us to the file/thread please.
If it is a custom rom, the it is meant to be via CWM.
1. Flash abyss42
2. Reboot recovery
3. Do your wipes
4. Flash.
Im sure there is a specific instruction on where you got that file. Or better yet, go to dr. Ketans thread and get your stock rom from there.
Sent from my GT-N7000 using xda app-developers app
It's just the standard rom file from sammobile.It does come as a zip you know. If you unzip it, then use rar on it you can see all the bits. I thought if I just put a different zimage in there it would just go ahead and use that, but didn't seem to like it after I zipped it all back up again.
Tonight I've ended up getting chainfires excellent CF-Root kernel.Flashed that through odin, over my speedmod kernel.
Put just the factoryfs part of the stock rom zip onto the SD card and flashed that using the cwm app that CF-Root installs for you.. Now have CF-Root kernel and 4.0.4 firmware.
If you don't already have a "safe" kernel then I dunno what the brick chances would be, but since I had a safe one already I thought it couldn't hurt to try it out.
The reason I haven't flashed the hidden, cache, model and sbl parts of the zip is that simply they wouldn't fit on my SD card If it behaves funny or I can make space then I'll try the rest too. And the reason I didn't flash the zimage from the zip should be fairly obvious. Because I don't want a brick
EDIT: I managed to clear some space on the SD and flashed the rest of it. Seems to be working ok, so far anyway. I'm hoping the battery issues from 4.0.3 will be a little better. This is a really good way of doing it all as you can just swap out a potentially bad kernel for one that has been 'protected' by having te emmc cap erase turned off.
Ok, I hate to be a noob, but I feel that I have to in this case.
I just got a new unlocked G-Note and it has has gingerbread. However I want to install ICS, Been trying to research through the threads myself, but its overwhelming for someone who hasn't been here to follow the threads from the beginning
I would appreciate some advice or steps to safely go from bone stock G-note to Official Samsung ICS
Current "About phone" Info:
Model number
GT-N7000
Android Version
2.3.6
Baseband Version
N7000XXLB2
Kernel Version
2.6.35.7-N7000XXLC1-CL-CL1003701
[email protected] #2
Build number
GINGERBREAD.XXLC1
PDA: N7000XXLC1
PHONE: N7000XXLB2
CSC: N7000OXXLB3
The guilds quickly get confusing, I have done a great deal of flashing device over the years, but have never been this lost.
Help/warnings are welcome
Hey man! Seems like you want to upgrade from GB to ICS on the Galaxy Note. GB is far more stable and bug free on the Galaxy Note. This is one device where upgrading to ICS is more of a downgrade. So to be honest i would recommend that you stay on GB until samsung get out a stable ICS ROM for the Note.
Firstly what i would recommend you to do is download chinfires app called Gotbrick.(Google it) Install the app on your Note on GB and see the verdict. The verdict will tell u if your Note has the eMMC brickbug. If the verdict tells "Danger" then upgrading to ICS is equal to suicide because all stock ICS kernels are known to have the eMMC_Erase functionality which will cause this bug to superbrick your phone.
However if you still want to take the rist then the steps to upgrade are: you can try the connecting your phone to your PC and run kies. It will automaticly check for updates and install them. Another method is using the phone itself. Goto Settings>About Phone>Software Update and check for updates. It should update to ICS automatically.
If none of the above work then use the ODIN method:
For the ODIN method the steps are:
1- Register and Download the Stock ICS for your region from here:http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
2-After download you should get a zip file. Unzip the content. You will get a .tar.md5 file.
3- Next get ODIN v1.83 (download it if u dont have it)
4- Make sure you have Samsung Drivers Installed on your PC and put your phone in download mode(Volume Down + Home + Power) and connect it to your PC using USB Cable
4- Then run ODIN as admin and then click the PDA button and choose the .md5 file you extracted. Make sure only Auto Reboot and F.Reset Time are checked in ODIN. Then click the start button and Let it flash the new Firmware.
After flash complete you should have Stock ICS 4.0.3 on your Note. What i would recommend is to flash a safe ICS kernel like Speedmod N7000 k3 on it to prevent it from getting bricked.
If this helped please click the Thanks button! Cheers!
Sorry to be a noob,
but i couldn't get a download link for the *chinfire's app Gotbrick* to check whether my SGN is not from *DANGER* to Stock ics update. =(
Looks like it's "Chainfire"
http://forum.xda-developers.com/showthread.php?t=1693704
OK, here's my experience with upgrading to ICS. I've had my note for about 2 months and have been following the forum trying to learn. It's very confusing to me and I was afraid to do anything so I did nothing. I live in Melbourne, FL and use Straight Talk. My note was purchased from Newegg and had a Brazil build number. Several days ago someone posted that Brazil was now on the "update to ICS" list, so I thought I'd check it out with kies. I use linux so I had to boot into my Windows 7 Ultimate OS(ugh). I opened kies and it said it could be updated to newer version, so I updated kies. Then I pluged in my note and low and behold it said update version available! I sweated a little and decided to go for it. It updated smooth as silk with no problems and now I have ICS! I have all the apps with all the data I had before update.
The new ICS is much quicker and smoother than GB, the difference is immediately noticable.
All the phone info changed to new numbers(android, baseband, kernel version and build number) and I didn't think to write it down so I can't post what it was. Anyway hope this info helps someone.
I agree that the update makes the UI quicker but however it makes the brick bug effective in the ICS kernel. With GB although the UI is slower, there is no risk of brick bug.
So its ur choice to choose between a relatively slower UI with no brick bug Or a faster UI but risking your phone. I recommend installing a custom GB rom which is stable and fast.
Sent from my GT-N7000 using xda premium
Hey, so I got really excited when ics came out and instanly went out to flash the repack (stupid, I know) and I checked and I do have the brickbug. So I know that I shouldn't flash using clockwork or do a factory reset and I wanna take your advice and flash a safe kernel like Abyss.
So I just wanna know if I should just flash it through clockwork and then I'll be ok right? My phone's performance and everything wouldn't be affected right? Also would prefer rather not downgrading to GB.
Thanks!
So yea, I do have the bug, but before I found out, I flashed ICS. Panic when I found out I could brick my phone, then flashed back
Question: Even though I have the bug, if I flash Stock Indian ICS, then Speedmod, will I be safe?
Daman1997 said:
Hey, so I got really excited when ics came out and instanly went out to flash the repack (stupid, I know) and I checked and I do have the brickbug. So I know that I shouldn't flash using clockwork or do a factory reset and I wanna take your advice and flash a safe kernel like Abyss.
So I just wanna know if I should just flash it through clockwork and then I'll be ok right? My phone's performance and everything wouldn't be affected right? Also would prefer rather not downgrading to GB.
Thanks!
Click to expand...
Click to collapse
Ok firstly i would like to say that if you do have the bug and are already on ICS then instead of downgrading to Gingerbread, try to flash a safe kernel. But stay away from Clockworkmod. Do not flash using CWM. Instead use ODIN to flash any kernel from the following:
Speedmod kernel
Franco Kernel
CM9 Knightlies
The best of these kernel is Speedmod kernel which has the best performance and best battery life. I have already made a tutorial on how to do this, just follow the steps on the tutorial found here: http://www.youtube.com/watch?v=o5K5Wm_201Y
---------- Post added at 11:36 AM ---------- Previous post was at 11:31 AM ----------
DJTJ said:
So yea, I do have the bug, but before I found out, I flashed ICS. Panic when I found out I could brick my phone, then flashed back
Question: Even though I have the bug, if I flash Stock Indian ICS, then Speedmod, will I be safe?
Click to expand...
Click to collapse
Before you flash anything tell me what are you running currently? are you running a stock ICS or a Custom ROM? If you are running stock ICS then you can easily flash Speedmod kernel with ODIN and you will be safe. You can see my tutorial here: http://www.youtube.com/watch?v=o5K5Wm_201Y
endingcolt007 said:
Ok firstly i would like to say that if you do have the bug and are already on ICS then instead of downgrading to Gingerbread, try to flash a safe kernel. But stay away from Clockworkmod. Do not flash using CWM. Instead use ODIN to flash any kernel from the following:
Speedmod kernel
Franco Kernel
CM9 Knightlies
The best of these kernel is Speedmod kernel which has the best performance and best battery life. I have already made a tutorial on how to do this, just follow the steps on the tutorial found here:
Click to expand...
Click to collapse
Ok, really appreciate the advice will try the speedmod kernel through ODIN, but I also have mobile ODIN installed, but I shouldn't use that then I assume. Thanks again!
Currently on a leaked LPY ICS and I have the dangerous kernel. I'm suffering from poor battery life at the moment.
What do you suggest I do? Should I go back to GB or give a new kernel a try?
If I flash a new kernel over LPY will it be safe to perform a factory reset?
Hi, I came across this thread: http://forum.xda-developers.com/showthread.php?t=1424997
It gives instructions on how to install JB on an ICS note.
Installation
1.a Pre installation : (For clean installation, optional)
- Make backup with Titanium Backup or other similiar app.
- First wipe cache and data if you are on GB ROM
- If you are on ICS/Custom ROM, make sure you have safe kernel, otherwise first flash it (here is philz safe kernel)and then only wipe cache and data.
1.b Final Installation
- Download ROM, and extract it to .tar file
- Download Odin, open it
- select PDA tab and point to ROM file. Leave Re-partition, pit, CSC, Phone tab unticked (see Image below)
- Switch off device, Put in download mode (Vol down + Home + Power)
- completely close kies, Anti virus if running
- Connect device to PC
- ID com port shud turn yellow (not shown in image)
Now hit Start
Click to expand...
Click to collapse
I'm from the UK and the only UK based ROM of JB is a Vodafone rom, my note was originally on 3, but it accepted an O2 sim card. I want to be sure that there would not be a problem using the Vodafone rom.
Secondly, how do I install a safe kernel on my note as this is an appropriate kernel to use: http://forum.xda-developers.com/showthread.php?t=1901191
I'm a little confused as some threads are in/out of date and I'm unsure which instructions to follow.
All help is appreciated,
Matt
It's up to you, I didn't do any of the wipe this, format that.
I was on a stock ICS rom, with a safe kernel, rooted.
I just downloaded the JB rom for my device, used PC-Odin, flashed the JB rom.
After flashing, I flashed philz kernel for this version of JB.
Some swear by the wipe, delete stuff. I have noticed NO ill problems with the device.
I guess if you do a lot of wiping, flashing it's best to wipe, delete before flashing, if you want to
make sure 100% of the old stuff isn't left behind. I'm pretty conservative with my device.
I only use stock roms, and other than rooting, I don't install the latest tweaks to squeeze every little
bit of performance.
My guess, I'm not familiar with the Euro roms/sim cards, but I'm guessing you will have to unlock it before
the rom would take the sim card (perhaps someone else can chime in on that).
My device was an unlocked Germany device (DBT) that I bought from Amazon, shipped to the States.
m-rhodes said:
Hi, I came across this thread: http://forum.xda-developers.com/showthread.php?t=1424997
It gives instructions on how to install JB on an ICS note.
I'm from the UK and the only UK based ROM of JB is a Vodafone rom, my note was originally on 3, but it accepted an O2 sim card. I want to be sure that there would not be a problem using the Vodafone rom.
Secondly, how do I install a safe kernel on my note as this is an appropriate kernel to use: http://forum.xda-developers.com/showthread.php?t=1901191
I'm a little confused as some threads are in/out of date and I'm unsure which instructions to follow.
All help is appreciated,
Matt
Click to expand...
Click to collapse
p51d007 said:
It's up to you, I didn't do any of the wipe this, format that.
I was on a stock ICS rom, with a safe kernel, rooted.
I just downloaded the JB rom for my device, used PC-Odin, flashed the JB rom.
After flashing, I flashed philz kernel for this version of JB.
Some swear by the wipe, delete stuff. I have noticed NO ill problems with the device.
I guess if you do a lot of wiping, flashing it's best to wipe, delete before flashing, if you want to
make sure 100% of the old stuff isn't left behind. I'm pretty conservative with my device.
I only use stock roms, and other than rooting, I don't install the latest tweaks to squeeze every little
bit of performance.
My guess, I'm not familiar with the Euro roms/sim cards, but I'm guessing you will have to unlock it before
the rom would take the sim card (perhaps someone else can chime in on that).
My device was an unlocked Germany device (DBT) that I bought from Amazon, shipped to the States.
Click to expand...
Click to collapse
Currently, my device is using the stock ICS rom, with the stock kernel. It was rooted using the Exynos Abuse app and patched the CPU exploit, but I un-rooted it. After un-rooting, my device has began to randomly reboot, So I think I need to install a safe kernel and a stock JB rom. I hate Samsungs touchwiz rubbish.
Also do a search for dr.ketan, he has a pretty good wiki on how to do an update.
m-rhodes said:
Currently, my device is using the stock ICS rom, with the stock kernel. It was rooted using the Exynos Abuse app and patched the CPU exploit, but I un-rooted it. After un-rooting, my device has began to randomly reboot, So I think I need to install a safe kernel and a stock JB rom. I hate Samsungs touchwiz rubbish.
Click to expand...
Click to collapse