Here's an easy way not to forget a cleaning cloth.
Not really a fan of taking off and putting on my case over and over again... wears the sides of the phone out a little.
I just fold and put it in my wallet.
Won't that trap heat in the case? Like insulation.
Sent from my Galaxy Note 2 using Tapatalk 2
That's where I stash an extra 20 in case I forget my wallet.
Sent from my SGH-T889 using xda app-developers app
odrecords said:
That's where I stash an extra 20 in case I forget my wallet.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Can I borrow your phone real quick. Need to make a quick phone call.
Sent from my GT-N7100
theoner1 said:
I just fold and put it in my wallet.
Click to expand...
Click to collapse
This.
Related
I have my SN2 for 10 days and i am using a tpu case from day one..today i found marks on the metal coat . Can i remove these marks?
nope, there will be some small marks, had it on my SGS2, still better than having no case IMO, after 1.5 years the marks didn't increase a bit. Planning to get a case for the Note 2 anytime
tamerh said:
I have my SN2 for 10 days and i am using a tpu case from day one..today i found marks on the metal coat . Can i remove these marks?
Click to expand...
Click to collapse
What sort of mark is it? A scratch? A dot? Or what?
Sent from my GT-N7100 using xda premium
They are dots but not deep..
Photos please. I like to use TPU, but am wondering what it does to this device.
Sent from my shooter using xda premium
KB112 said:
Photos please. I like to use TPU, but am wondering what it does to this device.
Sent from my shooter using xda premium
Click to expand...
Click to collapse
Yes pix please.
Geronimo.USMC said:
Yes pix please.
Click to expand...
Click to collapse
+1
Sent from my GT-N7100 using Tapatalk 2
I have just found a dot on mine too...but it doesn't make sense to me how the tpu can be the cause of it...but I'm pretty sure it wasn't there when I first got the phone
Sent from my GT-N7100 using xda premium
The TPU cases will scratch your phone's outter body, and there is no way to remove it but it will protect your phone.
I haven't had a device with Chrome Trim since my Touch Pro 1. I can see how little bits of dust can get in between the tpu and body of the phone. Some slight rubbing can cause the scratches I suppose. I haven't seen any on my last 3 devices, but then again they were dull/semi gloss black.
Sent from my Clean Rom'd HTC Flyer using XDA Premium.
slick4mitch said:
The TPU cases will scratch your phone's outter body, and there is no way to remove it but it will protect your phone.
Click to expand...
Click to collapse
But why? There are only dusts between the tpu and the phone , so what is scratching it?
Sent from my GT-N7100 using xda premium
Dust with include microscopic bits of grit - this is the culprit
I guess ideally you can use one of those clear skins on the body of the phone. Then use the tpu. No scratches anymore.
Sent from my shooter using xda premium
Had the same problem with the s3 and original slim cover
Sent from my GT-N7100 using xda app-developers app
can we see pics? Better to know how bad it could get before I cover mine up with a TPU case
KB112 said:
I guess ideally you can use one of those clear skins on the body of the phone. Then use the tpu. No scratches anymore.
Sent from my shooter using xda premium
Click to expand...
Click to collapse
Are there any on the market yet?
Sent from my GT-N7100 using xda premium
Make sure u clean ur case everyday..thats what im doing now for my tpu case..learn from the experience..
Sent from my GT-N7100 using xda app-developers app
I'm deciding between xda/cruzerlite and seidio surface/best buy premium
Xda is xda and only $10 and looks nice
Surface seems more durable and comes with holster that I might or might not use
This is my 1st phone that isn't a flip so I don't know if I will use it because I don't like that it takes up a whole pocket but the phone might weigh down my pants.
Sent from my SPH-L900 using xda app-developers app
I bought the surface and love it!!! Only thing is that it ripped off my skinomi screen protector so I'm in search for a screen protector that works with this case... It does seem to collect dust around the edges of the the screen but not too bad and doesn't bother me... Over I think it's perfect
Sent from my Unlocked & Loaded Beast!
Selling my surface 25 shipped only 3 days usage
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Why
Sent from my SPH-L900 using xda app-developers app
majorbgss said:
Selling my surface 25 shipped only 3 days usage
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Could you get a screen protector to work with the surface? A wet one I just ordered a just like glass one and the owner says it will be fine
Sent from my Unlocked & Loaded Beast!
I have the BB PT case and it works great. Love the holster.
Geting surface/bb premium I don't want to wait for xda case to come out
Sent from my SPH-L900 using xda app-developers app
I tried to resist the surface case for a while, cos I live in Europe and it's expensive with shipping, but, I couldn't hold my self off anymore! went on and ordered it(for a total of 40 $) , might get it next week.
Reviews, videos and ppl on xda have nothing but praising that case, though I've never seen it but I guess I won't be disappointed.
Sent from my GT-N7100 using xda premium
Got best buy premium and it didn't rip off the screen protector - I have spigen ultra optics
Sent from my SPH-L900 using xda app-developers app
pschatz12 said:
Could you get a screen protector to work with the surface? A wet one I just ordered a just like glass one and the owner says it will be fine
Sent from my Unlocked & Loaded Beast!
Click to expand...
Click to collapse
I have a JLG and the surface case... Best combo. Just make sure to line up the protector with the home button. The two literally fit together perfectly minus an 1/8" gap at the bottom. My camera can't even capture how well the two go together.
Enjoy!
Sent from my SGH-T889 using Tapatalk 2
Ghost_1 said:
I have a JLG and the surface case... Best combo. Just make sure to line up the protector with the home button. The two literally fit together perfectly minus an 1/8" gap at the bottom. My camera can't even capture how well the two go together.
Enjoy!
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Spigen ultra clear is just a small amount to the case so dust gathers there
Sent from my SPH-L900 using xda app-developers app
found a nice place to mount your 2?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I drive a 2002 Grand Prix and I use to mount my Note 2 on the left side right above the dash air vent using one of those universal holders that would stick to your windshield. It did'n't obstruct my front view at all. But I didn't really use it that much because it was just to big, clunky, and really ugly. So I just gave it to my girlfriend. I'm currently looking for something more compact, that will clip on to the center vents of the dashboard, and is easily removable to stow away when not in use.
I was looking into something like this. But I'm kind of leaning towards something that will just clip on the vent.
http://www.ebay.com/itm/120975906437?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
What about a CD mount?
Sent from my GT-N7100
laztpn0i said:
I drive a 2002 Grand Prix and I use to mount my Note 2 on the left side right above the dash air vent using one of those universal holders that would stick to your windshield. It did'n't obstruct my front view at all. But I didn't really use it that much because it was just to big, clunky, and really ugly. So I just gave it to my girlfriend. I'm currently looking for something more compact, that will clip on to the center vents of the dashboard, and is easily removable to stow away when not in use.
I was looking into something like this. But I'm kind of leaning towards something that will just clip on the vent.
http://www.ebay.com/itm/120975906437?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Click to expand...
Click to collapse
Here's what i was thinking as the cupholders are too shallow and I need to be fingers reach away from my phone.
http://m.tigerdirect.com/applicatio...mc=Email-_-WebletMain-_-WEBLET03ORDER-_-Deals
I have one on order as of today.
@rbiter said:
What about a CD mount?
Sent from my GT-N7100
Click to expand...
Click to collapse
CD mount is not an option as the radio I will be using has no CD slot accessible.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I also bought this one too today to see if I csn get it to suction to inside the cupholder.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
The other option would be to suction cup on top of the dash right above the DIC, hanging downwards but that's too far s reach for me.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I have a 99 GTP I haven't gotten a mount yet but might look for one. My old NS4G fit in the cup holder but no way this behemoth is doing that lol. I tried propping it on the shifter and it just fell. Basically keep it in my pocket or in the cubby hole in front of the shifter.
Incorrectly spelled on my stock rooted Sprint Note II
sky1193 said:
I have a 99 GTP I haven't gotten a mount yet but might look for one. My old NS4G fit in the cup holder but no way this behemoth is doing that lol. I tried propping it on the shifter and it just fell. Basically keep it in my pocket or in the cubby hole in front of the shifter.
Incorrectly spelled on my stock rooted Sprint Note II
Click to expand...
Click to collapse
See I use my Note way too much to keep it stowed away. Plus, it needs to be close so s not to distract my driving....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I used to own a 01 grand Prix GTP and think this would work i bought one for my bmw recently it hasnt arrived yet but once it does i can give you some feedback on it cost me less then $10 on eBay.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
nyrican779 said:
I used to own a 01 grand Prix GTP and think this would work i bought one for my bmw recently it hasnt arrived yet but once it does i can give you some feedback on it cost me less then $10 on eBay.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I'm sure it would. But even reaching for the radio is a bit of work. Yes, im that lazy....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dakleenupman said:
I also bought this one too today to see if I csn get it to suction to inside the cupholder.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Let me know how that turns out I like the cup holder idea.
Incorrectly spelled on my stock rooted Sprint Note II
sky1193 said:
Let me know how that turns out I like the cup holder idea.
Incorrectly spelled on my stock rooted Sprint Note II
Click to expand...
Click to collapse
Oh but of course I will.... This is XDA baby!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
You could also get any $3 case off ebay, put soft Velcro on the back of the case and then a square of hard velcro anywhere on the dash. I've been doing this for a while and I love it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
eglesiaw said:
You could also get any $3 case off ebay, put soft Velcro on the back of the case and then a square of hard velcro anywhere on the dash. I've been doing this for a while and I love it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
That would work except I leave my N2 in te OtterBox Defender case.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
http://www.proclipusa.com/?sectionp...lder=false&have_mount=false&p_pageid=1&dtype=
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dakleenupman said:
I also bought this one too today to see if I csn get it to suction to inside the cupholder.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Most vehicle plastics are textured. If the bottom of your cupholder is textured this won't work. It needs a flat /smooth surface.
Sent from my SPH-L900 using xda premium
KB112 said:
Most vehicle plastics are textured. If the bottom of your cupholder is textured this won't work. It needs a flat /smooth surface.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
It's flat but not the entire size of the flat surface is available due to the folding design. The one mount does come with a suction platform though.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dakleenupman said:
Oh but of course I will.... This is XDA baby!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Ok so one of the 2 mounts I ordered came in today. It's very late and after 13 hours of work, I am too tired to do any pics. But I shoud be getting some hopefully tomorrow.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Ok so no need for pics on the first one. It will not fit the factory cupholders. Nor will it attach/fit anywhere else except the windshield. So for now, until the floor mount cradle gets here, left side corner of windshield is where my Note will go. Definitely not ideal but it'll do.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I'm looking for a verticle pouch/ case I can use with the Zero Lemon Battery. I have a horizontal one now I picked up on ebay but the phone still slides back and forth inside the case. ..
Any Input is appreciated.
http://forum.xda-developers.com/showthread.php?t=2263901
Sent from my SAMSUNG-SGH-I317 using xda premium
apallohadas said:
http://forum.xda-developers.com/showthread.php?t=2263901
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
This is the one I am using.
Is this normal- I got this cruzerlite dna case and the paint (after a couple month s) is peeling but not as a result of drops . would cruzerlite replace this ? .
What do you think is causing this.
Sent from my SPH-L900 using xda app-developers app
darkMES said:
Is this normal- I got this cruzerlite dna case and the paint (after a couple month s) is peeling but not as a result of drops . would cruzerlite replace this ? .
What do you think is causing this.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Cruzer is notorious for poor quality
Sent from my SCH-I605 using xda app-developers app
akellar said:
Cruzer is notorious for poor quality
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
... and good support. Hit them up with a picture and a link to this forum message. They will take care of replacement!
darkMES said:
Is this normal- I got this cruzerlite dna case and the paint (after a couple month s) is peeling but not as a result of drops . would cruzerlite replace this ? .
What do you think is causing this.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I think they have a new process and no longer do the printed tpu. I would hit them up at support.cruzerlite.com and ask for a couple of the moulded cases.
I just took another look at the picture I took and the quality is so bad I don't think it looked that bad when I took it. Does xda downgrade quality to save space and loading time.
Sent from my SPH-L900 using xda app-developers app
mines the same way. Im going to email them and see what they say.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app